Content Posted in 2014
A study of the system lithia - silica, Roy Richard Ramey
A study of the temperature dependence of the Haeffner effect in mercury., Charles George Arnold
A study of the thermodynamics related to the production of cavitation by rotation of a vertical cylinder in liquid baths of tap water, liquid nitrogen, and freon-11., John Thomas Lineberry
A study of the transient state of transpiration cooling, William C. Wolkenhauer
A study of the transportation of mine rock by pumping, Howard Morris Fowler
A study of the undisturbed, remolded and artificially sedimented shear strength properties of an alluvial clay., Wayne D. Smith
A study of the University of Missouri technology transfer process, particularly as it applies to the National Institute of Standards and Technology energy-related inventions program disclosures, Sheela Nilam Yadav-Olney
A study of the use of Ada in the software development of a flight control system, Kurt Alan Liebel
A study of the use of random software testing of a flight control circuit simulation, Michael Alan Halwachs
A study of the ventilation of the Hiawatha Mine, Menominee iron range, Michigan, Thomas Alan O'Hara
A study of the void-strengthening of aluminum and its nature, Purushottam G. Manusmare
A study of thin viscous films with a free surface boundary., Larry Ray Shipers
A study of three methods which solve a suboptimum control problem on an iterative analog computer, Joseph Camp Finney
A study of titanium diffusion coatings by x-ray fluorescent methods, Alan Bernard Burgess
A study of trace organic emissions in mining and milling wastewaters in the new lead belt of southeastern Missouri., Alan James Callier
A study of trace organics and trace organic-bound metals in raw and finished waters., Robert Lee Stewart
A study of tunnel demolition by hasty methods, Richard Lee Bullock
A study of turbulent mass transfer in a wetted-wall column, David William Bunch
A study of two-phase flow in horizonal, condensate return lines of steam thermal systems., Richard A. Fleschner
A study of various autoregressive spectral estimators and the effects of varying the data block length, Alexander G. Perakis
A study of viscous frictional effects and relay characteristics on the operation of a positional relay servomechanism, Earl F. Richards
A study of volatility and desulfurization of titanium disulfide, Sheng-Tai Shih
A study of water supply districts in St. Louis where excessive waste of water has occurred, Randall Anthony Scheer
A study of wavelet-based noise reduction techniques in mammograms, Varun Shah
A study on chemical extraction and bioassays for lead, zinc and cadmium and effluent characterization in the New Lead Belt of Missouri, Danilo Linhares Fernandes
A study on degradation of polychlorinated biphenyls (PCBs) in contaminated matrices with gamma radiation, Qunhui Liu
A study on estimating parameters restricted by linear inequalities, William Lawrence May
A study on fragmentation and ground vibration with air space in the blasthole, Everett Ellsworth Bleakney
A study on load transfer of model friction piles, Richard Milton Franke
A study on operation of a 20-inch fluidized bed gasifier with indirect fired tube heating, Wenbin Eric Huang
A Study on Prediction of Improvement of Watertightness of Rock Mass by Grouting, Isao Nagayama, Yosuke Niitaka, Michio Ota, and Masahiko Yamashita
A study on probable geologic influences controlling shear strength of the Fort Hayes Member, Niobrara Chalk Formation, Gregory County, S.D., Steven Howard Brandon
A study on quench sensitivity and validation of JEQ for cast aluminum alloys A356 and B319, Sachin Mehta
A study on safety, grounding and protection of domestic electric service, Bharat Tamang
A study on some fracture criteria and their application to the angled crack problem, Ching-Chih Fu
A study on the evaluation process of inventions submitted to the University of Missouri system, Gary D. Kercher
A study on the feasibility of using pipelines for the collection and transportation of urban solid wastes, William Leo Sago Jr.
A study on the influence on pH on the adsorption capacity of soil, Lori Dawn Wood
A study on the injection forming of hollow and solid flanged components, Ravi S. Kelkar
A study on the lateral placement of automobiles due to restrictions on two-lane rural highways, Warren Chip Woods
A study on the optimum planning reserve margin for the Missouri electric system using the Over/Under Capacity Planning Model., Stanton Willard Hadley
A study on the process of float zone refining silicon using RF induction heating., Robert LeRoy Schaefer
A study on two iodine containing peptides isolated from porcine thyroglobulin, Frederick E. Bishop Jr.
A study to determine a process for the treatment of an amalgamation tailing, Robert Bruce Mitchell and Edward William Engelmann
A study to produce building material from recycled Polystyrene foam, Sunil Suram
A suboptimal control law for parametrically disturbed linear systems and its application to improve the transient stability of power systems, Atluri Bhima Ranjit Kumar
A suboptimal nonlinear controller for robotic manipulators, Bradley Eugene DePottey
A subsurface geologic study of petroleum possibilities in the Pennsylvanian rocks of Concho County, Texas, Gregory Paul Kraus
A summary of l-header designs using the AISI header design standard, Dean Peyton
A summary of operations and practice at Shenandoah-Dives, Howard Histed
A summary of the theories of the origin of the Lake Superior copper ores, with evidences pertaining thereto, Eva Endurance Hirdler
A survey of a sanitary sewer system with findings and recommendations, Warren Roy Gettler
A survey of development aids with an application of in circuit emulation., Michael Joseph Garnett
A survey of laser metal forming processes for rapid prototyping application and material delivery system for a rapid metal forming machine, Jennifer Gaye Stewart
A survey of Missouri's water resources involvement, Frank R. Ellis II
A survey of quality management in call centers, Vaibhav Suresh Adewar
A survey of single ended tuned grid tuned plate class C power amplifiers, Chandrakant D. Gandhi
A survey of the influence of selected sulfides on the thermal decomposition rate of zinc sulfate, L. G. Twidwell
A survey of the job performance of engineering management graduates with civil engineering preference, Bassem Assem Makzoumi
A survey of the methods of gas analysis, Yadvendra V. Desai
A survey to determine the most economic design for concrete runways of a class 4 airport, Yani Triandafilidis
Asymptotic behavior of the optimal poles of linear optimal regulators., Selvaraj Sathiya Keerthi
Asynchronous distance learning technology: the instructor's perspective, Earl Alexander Evans
Asynchronous nanowire crossbar architecture for manufacturability, modularity and robustness, Ravi Bonam
A synergistic approach to intelligent monitoring of large projects, Saleh Salim Sunaidi
A synergistic paradigm for intelligent multivariate data classification, Mohamed Tarek Gaber
A syntax-directed editor for Borland's Turbo Pascal, John Gatewood Ham
A synthesis procedure for transmission line broadband matching networks, Stephen Vincent Saliga
A synthesis procedure of distributed RC parameter networks, Chun-ming Wen
A systematic approach to a robotic work cell layout in an existing production facility, Thomas A. Meyer
A systematic approach to project portfolio selection for economic development in municipalities: a case study in Vienna, Missouri, Amanda Danielle Alpaugh
A systematic framework for structured object-oriented security requirements analysis, Sojan Markose
A systematic study of experimental parameters in a cloud chamber search for subionizers, Zin Aung
A systematic study of instrument variables upon the accuracy of microprobe analysis, R. A. Parr
A systematic transition to flexible manufacturing, Daniel Lloyd Webber
A system for the diagnosis of faults using a first principles approach, Barbara A. Smith
A system-level automotive EMC expert system, Sreeniwas Ranganathan
A system-on-chip hardware testbench, Christopher Michael Brueggen
A systems approach to evaluating the effectiveness of training programs, Jesse Michael Haverstick
A system study of a computerized grocery store, Neal Joseph Martini
A taxonomy-based design methodology for CIM laboratories in engineering education, Winston F. Erevelles
A technique for making torsion balance surveys of inundated areas, Karl Frederick Hasselmann
A technique for obtaining very efficient dynamical equations for on-line computation of joint forces of robotic mechanisms, Dennis A. Dohogne
A tensi-volumetric apparatus: theory, calibration, and use in an investigation of the oxygen non-stoichiometry of pure BaTiO₃, Glenn Jon Conger
A terrain study of the Bloodland Quadrangle, Pulaski County, Missouri, Lawrence E. Mullins
A testing system for the study of fuel cell anodes, Kerry Duane Meinhardt
A test method for measuring the flow in refractory materials at high temperatures, Christen Knudsen
A test of the municipal light and water plant of the City of Lebanon, Missouri, Roy Elliott Sprague, Germán García Lozano, and Shiv Raj
A textural algorithm to detect ulcer and crust in a skin tumor, Rama Krishna Prasad
A theoretical analysis of the free vibrations of a clamped circular plate with damping, Bhalchandra Krishnaji Vaidya
A theoretical and experimental investigation of single phase flow through a small centrifugal pump in three quadrants of operation, Lee Charles Cadwallader
A Theoretical and experimental study of cold cataracts using small angle neutron scattering, Michael Eugene Edwards
A theoretical and experimental study of the stress distribution in an infinite plane shrink-fitted on four circular elastic pins, Charles H. White
A theoretical and experimental study on air leakage through stoppings, Dai Wang
A theoretical approach to the problem of determining ejecta volumes in a gravitational vacuumed half-space, William J. Karwoski
A theoretical investigation of elastic and Voigt transient spherical waves, and plane three-element viscoelastic waves, Edward Hornsey
A theoretical investigation of periodic precipitation, Jack M. Scrivner
A theoretical model for the enzymatic degradation of polymers, Irfan Arshad Malik
A theoretical study of antecedent soil moisture as it relates to the rainfall-runoff relationship, Karen Sue Angert
A theoretical study of the mechanism for the Haeffner effect, David Charles Jacobs
A theoretical study of three-dimensional radiative transfer with polarization, Donald W. Mueller Jr.
A theoretical study on the interpretation of resistivity sounding data measured by the Wenner electrode system, Siew Hung Chan
A thermal contact conductance correlation for mechanically expanded finned tube heat exchangers, Mahmoud Ahmed Abu Ebid
A thermochemical study of the ore deposits of the Milliken mine, New Lead Belt, Missouri, Douglas L. Rickman
A thermocouple based proton beam profile monitor, Phillip D. Ferguson
A thermodynamic study of germanium sulfides, Sham Lal Malhotra
A thermodynamic study of the germanium sulphides, Satya Prakash Jain
A thermodynamic study of the molybdenum-sulfur system at 1100⁰C, Seth C. Schaefer
A thermodynamic study of the system PbO-PbS, John P. Hager
A thermodynamic study of the titanium sulfides, Reinhard Paul Abendroth
A thermodynamic study of the zirconium sulfides, Andrew Hessler Larson
A thermodynamic study of the zirconium-sulfur, titanium-sulfur and hafnium-sulfur systems in the disulfide-trisulfide region, Norbert Achilles Vermaut
A thesis on the improvement of western waterways, Fremont Wilson
A thin film evaporator rate controller, Daniel Robert Kasterlein
A three-dimensional analysis of creeping flow problems by the boundary element method, De-Shin Liu
A three-dimensional analysis of extrusion and metal forming by the finite element method, William Donald Webster
A three-dimensional bistatic radar target position measurement error model, Robert Kenneth Lynn
A three-dimensional mathematical simulator of multiphase systems in a petroleum reservoir, Leonard Koederitz
A three-dimensional seismic interpretation of a triangle thrust zone, Sublette County, Wyoming, Anthony Michael Schroer
A time and frequency domain approach to the optimization of linear multivariable regulators, Eugene Charles Machacek
A time-dependent approach to electron-atom scattering, Gavin Douglas Buffington
A time optimum bang bang control system under specified inputs., John F. Curtin
A time series approach to electric load modelling, Matthias Benjamin Noller
A time series classifier, Christopher Mark Gore
Atmospheric dispersion and dose estimates for research reactors, Matthew Clark Adler
Atmospheric measurements of cloud nuclei active at 0.04% supersaturation., Stephen Paul Vancil
Atmospheric measurements of cloud nuclei active at supersaturation from 0.013% to 0.681%, made at Rolla, Missouri., Tung-Hsi Liu
Atomic and magnetic structures of the LaNi5-xFex system, Choon Bee Tan
Atomic collision processes of interest in controlled thermonuclear fusion research, Victor Dewitt Irby
A total cost approach to mine roof support selection, Wesley Clare Patrick
A tour-de-force in polymer crosslinked aerogels, Sudhir Mulik
A tracking system for generating change transactions for digital maps, Kristin Leigh Smith
A training simulation for rural electric cooperative staff., David F. Larcker
A trajectory generation method for a computer-controlled robot using spline function trajectories and the implementation of a control program., Chris Wendell Edwall
A transient method of negligible internal thermal resistance for determining thermal contact conductance in a vacuum, Richard Chuka Oboka
A Translation program for 3D electromagnetic modeling software, Hong-Him Lim
A transmission electron microscopy study of some high strength plain carbon steels, George Joseph Vytanovych
A travelling-wave transistor amplifier, Manit Kovintha
A treatise on the use of insulating refractory brick in malleable annealing ovens, James Joseph Offutt
A triangular element for numerical solutions of axisymmetric conduction problems in cylindrical coordinates, Prafulla Chandra Mahata
Attitude scaling as a public involvement tool in the lower Mississippi River region comprehensive study, William A. Lee
Attracting and recruiting top quality construction leaders/managers for the future, Erik Carl Backus
A tunnel diode parametric down converter, Leland Lovell Long
A two dimensional graphic comparison system, Michael Alton Fisher
A two-dimensional, three-phase reservoir simulator using the IMPES formulation, Ralph Ross Roesler
A two-phase algorithm for the registration of fractured surfaces, Christopher P. Walker
A two-stage step-stress accelerated life testing scheme, Phyllis E. Pound Singer
Auction-based decision making for distributed real-time control of flexible manufacturing systems, Thananun Siwamogsatham
Auction-based job allocation for productive collaboration among small and medium size enterprises, Kaushik Sampath
Audio enhancement techniques for suppression of background noise and impulse noise, Jeffrey Russell Phillips
Auger satellites of the L₂₃ auger emission bands of Al, Si, and P, John Junior Melles
Augmented reality applications in product modeling, analysis, and development, Chia-Pin Huang
A unified bond theory, probabilistic meso-scale modeling, and experimental validation of deformed steel rebar in normal strength concrete, Chenglin Bob Wu
A unifying approach to risk and sensitivity analyses, James E. Pelkie
A unit hydrograph for the Missouri Ozark region., Melvin G. Schaefer
A usability and performance analysis of multiple monitor displays and multitasking, Jacob M. Truemper
Austenite grain-size in low-carbon steels and the coercive force of case carburized steels, Thomas Robert Graham
Autographic determination of thermally-induced linear changes in ceramic bodies, William Dean McKee Jr.
Automated clustering of non-deterministic data, Charles Walter Wittmaier
Automated computer aided stock cutting: irregular two-dimensional pattern generation using simulated annealing algorithm, Alireza Hajakbari
Automated data reconciliation, Atul Trasi
Automated design and fabrication of dental bars, Parthiban Delli
Automated Design of Continuous Cold Formed Beams, Ken P. Chong and David M. Harris
Automated development of an application programming interface (API) for an EXPRESS information model, Milind Madhav Khandekar
Automated evaluation of reservoir parameters applying pressure transient theory, Steven Robert Homoky
Automated generation of behavioral level microprocessor simulation models, William Keith Marshall
Automated manufacturability analysis for injection-molded and die-cast parts, Rahul Anil Bidkar
Automated mobile highway sign retroreflectivity measurement, Qiang Niu
Automated offspring sizing in evolutionary algorithms, André Chidi Nwamba
Automated operation sequencing in intelligent process planning: a case-based reasoning approach, Supratik Champati
Automated precision assembly through neuro-vision, Mahesh Kumar Vellanki
Automated synthesis and NULL cycle reduction optimization for asynchronous NULL convention circuits using industry-standard CAD tools, Bonita Bhaskaran
Automated temperature dependent Hall measurement system, Andrew Todd Bauer
Automated translation of digital logic equations into optimized VHDL code, John Evan Stark
Automatic color evaluation techniques for skin cancer diagnosis, Kishore Khemani
Automatic detection of atypical pigment network using texture segmentation, Sruthi Chandana Bhavanam
Automatic detection of border irregularity in skin lesions, Palaniappan Subbiah
Automatic detection of lesion border and edge-related structures in dermoscopy images, Xiaohe Chen
Automatic detection of malignant melanoma using boundary gradient information in dermoscopy images, Yogesh Ajit Dandekar
Automatic detection of regression and granularity in dermatoscopy images of skin cancer, Sreenu Tatikonda
Automatic direction finding using a digital processor., Mark Francis Sauer
Automatic machining sequence generation for intersecting features based on surface quality, Diganta Das
Automatic receiver tuning of single sideband speech signals in noise without transmitter cooperation, Ray Lynn Cross
Automatic recognition of digital modulation, Dennis John Simms
Automatic sensor fault diagnosis and controller reconfiguration for induction motor drives sensor fault-tolerance, Hainan Wang
Automatic skin tumor segmentation and diagnosis, Zhao Zhang
Automatic target detection using hidden Markov models for waterjet demining, Deepak R. Somasundaram
Automatic tumor border detection in dermoscopy images using gradient vector flow snakes, Bulent Erkol
Automatic tuning of A.C. compensating networks, Giles C. Sinkewiz
Automatic vessel and telangiectases analysis in dermoscopy skin lesion images, Beibei Cheng
Automatic wheel balancer for automobile wheel, Frederick Eugene Nevin
Automating a system safety program using Information Superhighway technologies, Sue Ann Ference
Automation in sculptured surface machining, Wisate Chungwatana
Automation of a high-potential test instrument, Jeffery D. Breshears
Automation of a jumbo drill using electrohydraulic cylinders, Robert Andrew Sickler
Automation of CAD model based assembly simulations using motion capture, Anup Madhav Vader
Automation of power network design in industrial and commercial buildings, Grzegorz Rzepka
Automorphism groups of resolvable incidence structure, Grant Harlan Lathrom
Autonomous parts assembly through neuro-vision, Eric William Roddiger
Autonomous target detection and position estimation using estimated probabilities, Ted Lee Johnson
Autonomous triggering system and measurement protocols for smart bridge testing, Theresa M. Swift
Autothermal non-catalytic reformation of jet fuel in a supercritical water medium, Jason W. Picou
A vacuum induction furnace for pyrometric cone equivalent determinations, Robert E. Farris
A value model for product development process using lean principles, Salik Yadav
Aventurine glazes, Felix Fraulini
Average stress-strain relationships of reinforcing bars in concrete panels incorporating the biaxial stress field effect, Amlan Kumar Sengupta
Average value modeling and nonlinear control of dc power systems, Steven F. Glover
A vibrating wire viscometer for liquids of viscosity 0.1 to 7.0 stokes, Tingli Tsai
A video compression algorithm for security applications, M. Ryan Bales
A visualization model for massively parallel algorithms, Rashi Khanna
A visualization tool for power system voltage dynamics, Krishnakumar Thirupathur Sathyanarayanamurthy
A vortex panel method for unsteady aerodynamics of multiple lifting surfaces with thickness, Kamran Rokhsaz
A water supply system for a small mining community, Paul Donovan Windsor
A weight loss technique for the determination of phase boundaries, Robert Lee Benner
A wet process for the extraction of mercury, Robert Glenn Sickly
A windowing-based approach for intrusion detection, Reno Madanmohan Kayarkar
A WWW based software metrics environment for software process management and software product quality improvement, Ravi Viswanathan
Axial Capacity of Concrete Infilled Cold-formed Steel Columns, C. Y. Lin
Axial Load Capacities of Steel Pipe Piles in Sand, Roy E. Olson and Khalil Al-Shafei
Axial Load Capacity of Piles in Sand, Roy E. Olson and Magued G. Iskander
Axial Load Capacity of Sheeted Cold-formed C and Z Members, Neil J. Glaser, Richard C. Kaehler, and James M. Fisher
Axial Strength of Purlins Attached to Standing Seam Roof Panels, John A. Stolarczyk and James M. Fisher
A yield and fracture model for TI-6AL-4V titanium and 7075-T6 aluminum, Richard L. Pendleton
Bachelors Theses, Missouri University of Science and Technology
Bachelors Theses, Missouri University of Science and Technology
Bachelors Theses, Missouri University of Science and Technology
Bachelors Theses, Missouri University of Science and Technology
Bachelors Theses, Missouri University of Science and Technology
Bachelors Theses, Missouri University of Science and Technology
Bachelors Theses, Missouri University of Science and Technology
Bachelors Theses, Missouri University of Science and Technology
Bachelors Theses, Missouri University of Science and Technology
Background modeling and algorithm fusion for airborne landmine detection, Hariharan Ramachandran
Bacteria from a suspended growth system as organic precursors to the formation of trihalomethanes., Frank Dolan
Baldwin Hills Reservoir Failure, G. A. Leonards
Ballistic limit curves for non-spherical projectiles impacting dual-wall spacecraft systems, Kuifeng Hu
Barium-tin alloys, James Richard Whanger
Barometric and pump test determination of the characteristics of a carbonate aquifer in the vicinity of Norman Creek, Phelps County, Missouri., Somchai Wongsawat
Barrettes Designed as Friction Foundations: A Case History, Chu-Eu Ho and Ching-Heng Lim
Barriers and best practices for material management in the healthcare sector, Carlos Callender
Base-induced reactions of p-Nitrobenzyl compounds, Paul Henry Ruehle
Base metal mineralization in South Central Missouri., Douglas Clifford Melton
Basic design of MOSFET, four-phase, digital integrated circuits, Earl Morris Worstell
Basic iron (III) alkanoate complexes, Young Hee Kim
Bauxite versus diaspore clay in high alumina (70%) refractory brick, Bhikhubhai Mahadeo Sedalia
Bayesian approaches on observational before-after highway safety analysis, Daxiao Liu
Beams with Corrugated Webs, Donald Sherman and James Fisher
Bearing Capacity of Footings on Compacted Sand, Alan J. Lutenegger and Michael T. Adams
Bearing Capacity of Pile Foundations, Xie Sheng-sun
Bearing Capacity of Piles Under Long-Term Vibration, Xu You Zai, Liu Yao Fu, Shi Yul Iang, and Xin Su Lan
Bearing capacity of shallow foundations, Yassin Taissir Al-Kour
Beaver Bridge by J. E. McGarth, Missouri University of Science and Technology
Behavioral modeling of semiconductor devices for system model, Rongkai Xu
Behavior and Design of Axially Compressed Sheathed Wall Studs, L. C. M. Vieira Jr. and B. W. Schafer
Behavior and Design of Continuous Girts and Purlins, Dimos Polyzois and Peter C. Birkemoe
Behavior and effects of nanoparticles in complex fluid systems, Chen Wang
Behavior and fatigue properties of metallic dampers for seismic retrofit of highway bridges, Stephen Eads
Behavior of advanced innovative materials for improved long-term bridge performance, Wei Zheng
Behavior of a hot-wire anemometer in low velocity air flow., Paul John Christman
Behavior of arc spot weld connections subjected to combined shear and tension forces, Laura K. Stirnemann
Behavior of a remolded silty-clay subjected to sequential loading, Lawrence Tsi-Ching Chung
Behavior of Braced Deep Excavation in Soft Soils, Changjie Xu, Yuanqiang Cai, and Shiming Wu
Behavior of built-up cold-formed steel I-section wall studs, Tyler A. Stone
Behavior of Buried Concrete Box Culvert, Y. S. Kim and P. Y. Thompson
Behavior of C- and Z-purlins under wind uplift, Parviz Soroushian and Teoman Peköz
Behavior of C- and Z-purlins under Wind Uplift, Parviz Soroushian and Teoman Peköz
Behavior of Channel and Z-section Beams Braced by Diaphragms, N. Celebi, T. Pekoz, and G. Winter
Behavior of clay under compaction by vibratory rollers., Glenn R. Taylor
Behavior of cold-formed steel roof trusses, Michael M. Harper, Roger A. LaBoube, and Wei-wen Yu
Behavior of cold-formed steel stud-to-track connections, William G. Bolte
Behavior of cold-formed steel web elements with web openings subjected to web crippling and a combination of bending and web crippling for interior-one-flange loading, Sameer U. Deshmukh
Behavior of cold-formed steel web elements with web openings subjected to web crippling and a combination of bending and web crippling for interior-one-flange loading, Sameer U. Deshmukh, Roger A. LaBoube, and Wei-wen Yu
Behavior of Cold Rolled Stainless Steel Members, S. T. Wang and S. J. Errera
Behavior of compression web members in cold-formed steel truss assemblies, Jerome A. Riemann, Roger A. LaBoube, and Wei-wen Yu
Behavior of Compressor Foundation – Predictions and Observations, Shamsher Prakash and Vijay K. Puri
Behavior of Continuous Span Purlin Systems, Roger A. LaBoube, M. Golovin, D. J. Montague, D. C. Perry, and L. L. Wilson
Behavior of Double-row Pile Retaining Structure for Deep Excavation in Soft Clay, Yuanqiang Cai, Shiming Wu, Yunmin Chen, and Changjie Xu
Behavior of elastic and inelastic three-dimensional building systems for static loads and multicomponent earthquakes, Prasert Kitipitayangkul
Behavior of externally bonded fiber reinforced polymer systems for strengthening concrete girders in shear, Michael Shawn Murphy
Behavior of full-scale RC T-beams strengthened in shear with externally bonded FRP sheets, Antonio Brancaccio
Behavior of Ground Anchors for Taipei Sedimentary Soils, J. C. Li, H. L. Yao, L. P. Shi, and B. I. Shy
Behavior of heat strengthened laminated glass in severe windstorm environments, Amy Diane Horst
Behavior of inelastic multi-story structures subjected to 2-D earthquakes, Kenneth Byron Oster
Behavior of Light Gage Diaphragms Coupled with X-bracing, James M. Fisher and Donald L. Johnson
Behavior of Nested Z-shaped Purlins, Gergory W. Robertson and Carl E. Kurt
Behavior of nonclassically damped dynamic systems, Sumant Savio Peres-Da-Silva
Behavior of reinforced concrete girders under cyclic torsion and torsion combined with shear: experimental investigation and analytical models, Gary Gordon Greene Jr.
Behavior of reinforced loess specimens under triaxial load, Mohammad Taghi Izadi
Behavior of Some Earth Dams on Liquefiable Soil, A. Popovici, V. Perlea, and L. Corda
Behavior of staged externally bonded carbon fiber reinforced polymer sheets for improved ductility, Laura Marie Rathe
Behavior of steel building connections subjected to inelastic strain reversals, E. P. Popov and R. B. Pinkney
Behavior of steel building connections subjected to inelastic strain reversals experimental data, E. P. Popov and R. B. Pinkney
Behavior of the Underpinning of a Building in Venice, F. Colleselli and G. Cortellazzo
Behavior of thin steel gusset plates in compression, Daniel George Lutz
Behavior of Two Big Rockfill Dams, and Design Aims, V. F. B. de Mello
Behavior of undrained monotonically loaded low plasticity silt under triaxial compression, Ali Mohammad Izadi
Behavior of web elements with openings subjected to bending, shear and the combination of bending and shear, Ming-Yang Shan
Behavior of web elements with openings subjected to bending, shear and the combination of bending and shear, Ming-Yang Shan, Roger A. LaBoube, and Wei-wen Yu
Behavior of web elements with openings subjected to linearly varying shear, Matthew R. Eiler, Roger A. LaBoube, and Wei-wen Yu
Behavior of web elements with openings subject to linearly varying shear, Matthew R. Eiler
Behaviour of a Geogrid Reinforced Embankment over Waste Material, P. Rimoldi, D. Cazzuffi, and A. Pagotto
Behaviour of Bridge Abutment on Fractured Chalk, A. Marsland and A. P. Butcher
Behaviour of Inginimitiya Embankment Dam, T. Sivapatham
Behaviour of Ramganga Dams, Bhagwat V. K. Lavania
Bench scale PBX separation facility for chemical extraction of PBXN-3, PBXN-4, PBXN-5, and PBXN-6, Stephen Edward Ruggeri
Bending of isosceles right triangular plates, Ping-Tung Huang
Bending Strength of Cold-formed Steel Longitudinally Reinforced Beam Webs, Phung Nguyen and Wei-wen Yu
Bending Strength of Deep Corrugated Steel Panels, James L. Jorgenson and Chingminn Chern
Beneficiation of a zinc rich oxidized ore from Nuevo Léon, México, Jorge Casas Nieto
Beneficiation of manganese ores, Michael V. Healey
Beneficiation of ultrafine coals with the use of selective flocculation and oil agglomeration, Yungchin Ding
BER estimation in a non-linear digital communication system using the Tail Extrapolation Technique, Kok-Ching Ong
Best practices for implementing a biodiesel program, Sundaresan Sadashivam
BGA footprints modeling and physics based via models validation for power and signal integrity applications, Giuseppe Selli
Bidding and negotiation of government funded contracts with inflationary considerations., David Thurman Hearst
Binary homogeneous nucleation of octane isomers, G. Jay Doster
Binary molecular diffusivities in liquids: prediction and comparison with experimental data, Ronald Dean Mitchell
Binuclear phthalocyanine core controversy: aromatic vs. diene core, Srinivas Achanta
Bioactive behavior of a borate glass, Marina N. Richard
Bioactive borate glass coatings for titanium and its alloys, Laxmi Kanth Peddi
Biodegradable dysprosium lithium borate glasses for radiation synovectomy treatment, Samuel D. Conzone
Biodegradable polymer/clay nanocomposites based on poly(butylene adipate-co-terephthalate) and Polylactide, Mahin Shahlari
Biodiesel production using supercritical methanol, Dhaval Nitin Modi
Bioelectric impedance techniques for clinical detection of skin cancer, Sanat Kapoor
Bio-inspired approaches for critical infrastructure protection: Application of clonal selection principle for intrusion detection and FACTS placement, Kasthurirangan Parthasarathy
Bio-inspired design, fabrication and testing of bipolar plates for PEM fuel cells, Nannan Guo
Bio inspired techniques for simultaneous design of multiple optimal power system stabilizers, Tridib Kumar Das
Biological degradation of methyl tertiary-butyl ether (MTBE) oxidation byproducts, Brian Gregory Panka
Biologically inspired identification and classification of a system's environment through artificial vision, Robert S. Woodley
Biologically inspired intrusion detection in distributed systems, Geoffrey Franklin Roth
Biologically inspired neural network connectionist models for use in artificial vision systems, David Lee Enke
Biological treatment of wastewaters from lead-zinc mine/mill operation., William James Ernst Jr.
Biomineralization of carbonates in modern microbial sediments and its implications for CO₂ sequestration, Varun Gnanaprian Paul
Bipolar excitation of switched reluctance machines, Chris S. Edrington
Bit penetration into rock - a finite element study, Jaw-Kuang Wang
Bit-slice based microprogramming development system design, Wen-His Yeh
Bituminous coal mining in Northern Missouri, true Walter Blake
Blast resistance of un-reinforced masonry walls retrofitted with fiber reinforced polymers, Khaled A. El-Domiaty
Blast-resistant Design of Cold-formed Steel Panels, Albert R. Ammar, George S. Tseng, and John J. Healey
Block level link path design and multilayer via transition model assembly using S-parameters, Francesco de Paulis
Bluetooth based structural health monitoring telemetry system, Vilas Ramappa Uchil
Boehmite-bonded high-alumina refractories, Gerhard H. Schiroky
Boiler feed water purification at the Gorge Power Plant, Akron, Ohio, Bernerd William Adams
Bolted Connections in Cold Formed Steel Structures, Wei-wen Yu and Randall L. Mosby
Bolted connections in cold-formed steel structures, Randall L. Mosby and Wei-wen Yu
Bolt head fillet stress concentration factors in cylindrical pressure vessels, Gowri Srinivasan
Bond behavior of fiber reinforced polymer laminates to concrete subjected to varied surface preparation, Jason Michael Jeffries
Bond behavior of high-volume fly ash and self-consolidating concrete, Trevor Jay Looney
Bond between carbon fiber reinforced polymer sheets and concrete, Brian Daniel Miller
Bond characteristics of FRP reinforcing bars embedded in fiber reinforced concrete, Kenneth A. Campbell
Bond characterization of fiber reinforced polymer (FRP) laminates to steel, Anja Frauenberger
Bond characterization of steel reinforced polymer and steel reinforced grout, Marta Matana
Bonded composite patch design for aircraft structures exhibiting cracking and corrosion, Madhukar Singh
Bonded composite repair of corroded aluminum substrates subjected to fatigue loads, Paresh Kumar
Bonded joint strength versus loading rate, Charless William Fowlkes
Bond graph modeling techniques applied to electromagnetic field systems., Abdelkader Gacem
Bond graph models of synchronous and induction machines., Kamut Sirivadhna
Bonding Technetium-99m to hydroxyapatite particles: opportunity to use hydroxyapatite as a means to remove Tc-99 from nuclear waste streams, Michelle Elaine Minard
Bond performance of recycled aggregate concrete, Amanda Renee Steele
Bond strength of FRP bars in concrete and the effects of FRP bars at elevated temperatures on concrete cover, Bryan Lee Vollintine
Bond strength of high-volume fly ash concrete, Michael Hayse Wolfe
Bond, transfer length, and development length of prestressing strand in self-consolidating concrete, Krista Beth Porterfield
Bootstrap prediction intervals for multivariate time series, Florian Sebastian Rueck
Borate based bioactive glass scaffolds for hard and soft tissue engineering, Steven B. Jung
Borate glasses for bioactive coatings on titanium, Heather Kimberly Teitelbaum
Boron implanted strontium titanate, Connie MacDonald Cooper
Boundary detection in skin tumor images : an overall approach and a radial search algorithm, Jeremiah Eugene Golston
Bound carbonyls in adsorbed PMMA-r-PS copolymers, Pavan K. Challa
Bound-free continuum radiation from non-gray nonisothermal shock layers, Chu Yih Wang
Box Beam Stiffening Using Cold Formed Decks, Condrad P. Heins and David Blank
Bracing Requirements of CFS Cee-studs Subjected, Perry S. Green, Thomas Sputo, and Viswanath Urala
Breakdown in high voltage, high energy density multilayer ceramic capacitors, Amanda L. Young
Break-even criteria for a pulsed D-T reactor, Kenneth Franklin Keller
Breakup of biomolecules through low-energy ion bombardment, Daniel M. Storey
Brecciation, mineralization and facies relationships of Cambro-Ordovician carbonates in the Arbuckle Mountains and Southern Oklahoma Aulacogen, Oklahoma., Harry Howard Posey
Bridge damage detection using an intelligent engineering system, Dionysios N. Danilatos
Bridge deck condition assessment using destructive and nondestructive methods, Brandon Tyler Goodwin
Brine migration in Chadian-Brigantian carbonate strata of southeastern Ireland, Stephen Paul Becker
Broadband impedance matching using multi-section quarter-wave transformers, Alan Richard Webber
Broadband response to seismic systems : theory and applications of the velocity transform, Patrick Michael Graul
Broad-spectrum antibacterial properties of metal-ion doped borate bioactive glasses for clinical applications, Megan Ottomeyer
Bromination of gold ore, Francis Joseph Tayman and Santiago Chamberlain
Bubble formation, movement and distortion in viscous glass, Simon Cheng-Ping Wang
Buckling Behavior and Post-Buckling Strength of Perforated Stiffened Compression Elements, Wei-wen Yu and C. S. Davis
Buckling load of fully embedded pile, Sally Prakash
Buckling of diaphragm-braced columns of unsymmetrical sections and application to wall studs design, Amir Simaan, George Winter, and Teoman Peköz
Buckling of diaphragm-braced columns of unsymmetrical sections and application to wall studs design, Amir Simaan
Buckling of Eccentrically Loaded Curved Panels, Ted T. Sokol Jr.
Buckling of Plates and Beam Sections under Stress Gradient, Shien T. Wang and Yei L. Tien
Buckling of Plates Containing Openings, Fong-Yen Chow and Rangachari Narayanan
Buckling of profiled steel diaphragms, Rao V. Nunna
Buckling Strength of Cold-formed Steel Curved Panels, James L. Jorgenson and Asadul H. Chowdhury
Buckling Strength of Plates, Zu-long Sun
Buckling strength of titanium alloy columns in the elastic and inelastic range, Richard O. Rintoul
Budgeting and control of Department of Defense expenses through variance analysis., David E. Amthauer
Building Design and Construction over Organic Soil, C. N. Baker Jr., S. B. Steinberg, and W. Lam
Building HVAC energy analysis software development, Guruprasad Rao
Buildup factor formulae for multi-layer shields, Mevlut Guvendik
Buoyancy-affected laminar and turbulent boundary layers over nonisothermal continuous moving plates and cylinders., Arun Kumar Bhattacharya
Burden-rock stiffness and its effect on fragmentation in bench blasting, Norman Saylor Smith
Bus functional modeling of a Motorola 68HC11 microcontroller using VHDL, Timothy Durell Emmerich
Business-oriented Software Process Improvement based on CMM and CMMI using QFD, Yan Sun
Business risk in early design: an approach, Rahul Basavaraj Patil
Butler-Carlton Civil Engineering Building, Missouri University of Science and Technology
CAD-based graph features for three-dimensional neuro-recognition in a manufacturing environment, Kuang-Ming Tseng
CAD technology for the synthesis of spatial mechanisms, Rajiv Shah
Caisson Design by Instrumented Load Test, D. J. Lane
Caisson Load Test and Instrumentation Program – Sohio Corporate Headquarters, Barry R. Christopher and Clyde N. Baker Jr.
Calcination of Missouri flint, burley and diaspore clays in a rotary kiln, Richard Addison Parker
Calcium carbonate precipitation mechanisms and geochemical analysis of particulate material found within the waters of Maramec Spring, St. James, Missouri, Kyle Steven Rybacki
Calcium migration in dense alumina aged in water and physiological media, Heidi H. Osterholm
Calcium wire ladle treatment to improve cleanliness of centrifugal cast steel, Edith Yolanda. Martinez Silva
Calculated and Observed Settlements of Multistory Building Founded on Loess, Sasha D. Milovic, Zuhtu S. Ozden, and George S. W. Chow
Calculated cohesive energy of the ordered copper-gold alloy Cu Au I, Richard W. Hannum
Calculated neutron dose rates from a plutonium source using the Monte Carlo method, Erik F. Shores
Calculating the reliability indices of a power distribution system, Rama Chandrayanam Jupalli
Calculation of average error probability for phase-shift keyed signaling in the presence of scintillation., Youngyearl Han
Calculation of buildup factors for multilayer slab shields using the Monte Carlo method, John Paul Kuspa
Calculation of eddy current loss of a disc, Kou Quen Chang
Calculation of eigenvalues of the Helmholtz equation by boundary element method, Jia-Maw Doong
Calculation of gamma-ray albedo using the Monte Carlo method, Ezatholah Aslani-Amoli
Calculation of gamma ray efficiency and response function of a Ge detector by the Monte Carlo Method, Bijaya Shrestha
Calculation of neutron fluxes in and around the pressure vessel of a combustion engineering PWR, Keith Paul Hock
Calculation of optimum conditions for simultaneous heat and mass transfer in porous membranes, Chia-Chang Liu
Calculation of scaled nucleation rates for water using Monte Carlo generated cluster free energy differences, David J. DiMattio
Calculation of Sheet Steel Diaphragms in the UK, E. R. Bryan
Calculation of stability margin for control system with real parameter variations, Dah-Jih Chen
Calculation of the neutron flux in the side regions of the prestressed concrete reactor vessel of a high temperature gas cooled reactor, Richard Robert Kent Jr.
Calculations of maximum sag of a transmission line with an ice load on one span, Rodney A. Schaefer
Calibration of an instrument to calibrate accelerometers, Nader Khorzad
Calibration of resistance factors for axial capacity of driven pile into Missouri soil, Mulugeta Abay Kebede
Calibration of weirs by means of critical flow and specific energy, Robert A. Rapp
Calibrations of Cold-formed Steel Welded Connections, F. M. Tangorra, R. M. Schuster, and Roger A. LaBoube
Calorimetric determination of the thermodynamic behavior of reversible liquid-phase reactions for use in energy storage, Patrick Francis Thompson
Calorimetry of room temperature deformed copper, George Juri Filatovs
Cam synthesis and analysis for elastic link follower systems, Donald Raymond Flugrad Jr.
Capability of a complex viscosity apparatus to measure storage and loss moduli of solid polymers., James D. Wood
Capacity and other characteristics of a standard MIMO channel, Adam Panagos
Capillary electrophoresis and its applications in the biological sciences: coenzyme A, polyamines and catecholamines, Guanshu Liu
Capillary electrophoresis of pteridines in urine and plants and quantification of pharmaceutical and personal care products in Missouri waste water, Stephen E. Gibbons
Capping of an Extremely Soft Neutralised Uranium Tailings − A Case History in Environmental Geomechanics, Y. Sheng, P. Peter, Y. Wei, and A. R. Milnes
Cap removal torque of plastic bottles after free-fall drop testing : an experiment on multicolored caps, Rawin Raviwongse
Cap torque optimization of continuous-threaded closures, Sarunyapong Pramsaneh
Capture zone modeling for photovoltaic microgrid powered pump and treat remediation, John Patrick Conroy
Carbonate facies of the Kimmswick Limestone (Trenton/Galena) in southwestern Illinois : their relations as oil reservoirs and traps, Gregory A. Crews
Carbon bonded alumina refractory with additions of a transient liquid phase, Dong-Hwi Steve Shinn
Carbon credits and energy subsidies in economic decision making for confined animal feedlot operation waste treatment, Taresh Grover
Carbon monoxide attack of refractories, William A. Frad
Carbon nanotube supported electrocatalysts for polymer electrolyte membrane fuel cells, Liang Li
Career choice in the 21st century: implications for engineering and technology programs, Suzanna Long
Carrot or stick: why do people strive for perfect attendance?, Carolyn Louise Merritt
Cartographic pattern recognition using template matching, Angela G. Lammers
CASAL : computer aided structural analysis learning, John Sullivan O'Doherty
Case Histories and Vibratory Characteristics of Vibro-driven Piles, Hideo Tsuboi and Tamotsu Matsui
Case Histories for Settlement Analysis in Ground Improved by Vertical Drain, Takaharu Shogaki, Hayato Moro, and Minoru Matsuo
Case Histories for Today's Geotechnique, R. B. Peck
Case Histories in Seismic Response Analysis, W. D. Liam Finn
Case Histories of Damaging Earthquakes, Walter W. Hays
Case Histories of Designing Tunnel Linings in Seismic Regions, Nina N. Fotieva and Nikolay S. Bulychev
Case Histories of Engineering Vibrations. Paper No. GR-IV, George M. S. Manyando and Sanjeev Kumar
Case Histories of Forensic Engineering "Where Things Went Wrong". Paper No. GR-VIII, Richard Wesley Stephenson
Case Histories of Foundations. Paper No. GR-I, Alan J. Lutenegger and Carole L. B. Mitchell
Case Histories of Foundations With Stone Columns, K. R. Dayte and M. R. Madhav
Case Histories of Geological, Rock and Mining Engineering Including Underground Structures and Excavations. Paper No. GR-VI, Christopher G. Mueller, M. Kavvadas, and Baoshan Huang
Case Histories of Geotechnical and Hydrological Management and Remediation of Solid, Hazardous and Low-Level Radioactive Wastes, Including Liner Cover Systems. Paper No. GR-X, Carsten H. Floess, Mary C. Lamie, and Wayne R. Bergstrom
Case Histories of Geotechnical Earthquake Engineering. Paper No. GR-III, Ahmed-W. Elgamal and Marshall Lew
Case Histories of New Solutions to Traditional Geotechnical Problems. Paper No. GR-IX, Vijay K. Puri, Tom Blackburn, and John M. Benson
Case Histories of Retaining Structures and Deep Excavations. Paper No. GR-V, Raj V. Siddharthan and Arni E. Rafnsson
Case Histories of Slopes, Dams, and Embankments. Paper No. GR-II, Vlad G. Perlea, Mary P. Perlea, and Bujang B. K. Huat
Case Histories of Two Kinds of Composite Function − Constructing Buildings Over-crossing Canals, Niu Zhirong and Zhou Changyong
Case History - Hyperbolic Cooling Tower Foundation, L. J. Almaleh
Case History of a Partially Underground Power House, K. K. Kapoor and S. C. Patodiya
Case History of Maneri-Uttarkashi Power Tunnel, R. K. Goel, J. L. Jethwa, and B. Singh
Case History of Seismic Base Isolation of a Building –The Foothill Communities Law and Justice Center, Marshall Lew and John C. Bowman Jr.
Case History of Two Building Experience Large Post Construction Settlements - Wilmington, Delaware, R. David Charles
Case History on Dewatering Problems in Shanghai, L. X. Shi
Case History on the Foundation and Site Liquefaction Potential Evaluation for the Renovation of a One-hundred Year Old Building, Vassilios K. Magginas
Case studies of mergers & acquisitions: best practices for technology transfer, Ildefonso Gonzalez Artigas
Case Studies on Long-term Settlement of Soft Clay Ground, Yoshihiko Tanabashi, Hidetoshi Ochiai, Yoshinori Saitoh, and Kazuya Yasuhara
Case Studies Through Material Modelling and Computation, C. S. Desai
Case Study – Ground Failures and Ruptures in Xian City, Zhong-Qi Wang and Rong-Xiang Zhang
Case Study on Landslide Investigations in Himalayas, D. V. Singh and Jai Bhagwan
Catalytic effect of copper ions on homocysteine auto-oxidation to induce oxidative stress, Douglas Robert Krutil
Catalytic effects of the inorganic rock matrix in the pyrolysis of oil shales, John Bryer Tummons
Catalytic effects on radiation-induced polymerization of methyl methacryalate, David E. Bartine
Categorization and experimental evaluation of anchorage systems for fiber-reinforced polymer laminates bonded to reinforced concrete structures, Stephen V. Grelle
Cathodoluminescence petrography of phosphate grains in Jurassic (Aalenian) sedimentary iron ores, Alsace-Lorraine, France, Musa Karakus
Cationically modified boehmite for ink jet paper coatings, Jinzhen Shi
Cationic polymerization of soybean oil, Rong Zhuge
Caudal autotomy in West Indian Amphisbaena, Hugo Alamillo
Causal factors in the hydration susceptibility of periclase aggregates, Chao-Min Cheng
Caving procedure at the Crestmore Limestone Mine of the Riverside Cement Company, Riverside County, Calif., Randall Helt Wightman
Cavitation resistance of rock., Philip Randolph Scott
Cavity detection by surface wave distortion - a finite difference model., Robert Michael Stovall
CEEME: compensating events based execution monitoring enforcement for Cyber-Physical Systems, Thoshitha T. Gamage
Cell model of a fluid with hard-core repulsive long-range attractive potential, Ralph G. Tross
Cellular automata study of the feasibility of a parallel optical computer, Jason Robert Lane
Cellulase production by fermentation with trichoderma viride on cellulose and wood wastes, Nguyen Huu Kho
Cellulose pellets, John J. O'Neill Jr.
Cell wall biosynthesis in Aureobasidium pullulans, David R. Quigley
Cement testing, Arthur D. Terrell
Cenozoic and recent lunulitiform bryozoans of the Gulf and Atlantic coasts, Ronald Greeley
Centrifugal model study and finite element analysis of stress near a fault, Christopher Haycocks
Centrifugal partition, liquid, and gas chromatography separation of biologically important chiral molecules, Adam Chau-Dung Chang
Centrifuge modeling of blast effects on underground tunnels in cemented sands, Keith Lyle Tayon
Ceramic dielectrics for high energy density capacity application, Sheng Chao
Ceramic possibilities of some Missouri clays and shales, Leonard Nathanael Larson
Ceramic properties of the clays of the Polo Gas Field, Clarence Arthur Lambelet
Cerium-based conversion coatings on cast aluminum 380 and 413 alloys, Ci Lin
Cerium-based conversion coatings on magnesium alloys, Carlos E. Castaño
Certain features of alteration in the Michigan lavas and their genetic interpretation, Peethambaram Doraibabu
Certain trace element distribution in the Searchlight, Nevada quartz monzonite, Clark County, Nevada, Jai Nandan Shrivastava
Cervical cancer histology image feature extraction and classification, Peng Guo
CFD analyses of two-phase flow with vapor emission for automotive refueling system, Raja Banerjee
CFD simulation of contact planarization, Shanti Vusirikala
CFD simulation of void flow in ECCS, Lifeng Wang
CFRP strengthening of concrete bridges with curved soffits, Nagaraj Eshwar
CFSEI Educating North American Practitioners in Principles of CFS Framing Design, W. D. Allen
Chalcogen elements in aerosols: a study of the behavior of TE, SE and S in air, Kuen-Yuan Chiou
Changes in fracture toughness related to reactions between magnesium chromite brick and Portland cement clinker, Paulino Estrada Diaz
Changes in the thiol status of neurodegenerative disorders and the effects of copper on the amyloid beta peptide clearance, Suneetha Mare
Channel and Z-sections braced by diaphragms, Nuri Celebi and George Winter
Characteristic impedance of open microstrip transmission lines having finite thickness and multiple dielectric, Philip Julian Carter
Characteristic modifications due to 2-methyl-1,3-propanediol in polymers, Pamela M. Duncan
Characteristics of and suggested improvements in communication laboratory equipment at University of Missouri-Rolla, William Edgar Abernathie
Characteristics of a stirred bed reactor used for gas-solid reactions, Christine Joy Beyke
Characteristics of bacillus influenzae, Georgena Josephine Clarke
Characteristics of ground granular activated carbon for rapid small scale column tests, Ashwin G. Patni
Characteristics of laser forming austenitic stainless steel alloys, Jack Robert Pennuto
Characteristics of pyrometric cone equivalent test furnaces, Alfred W. Allen and Joseph T. Dusza
Characteristics of surface electromagnetic wave couplers using metal-lens assisted horn antenna., Mohamed Noureddine
Characteristics of surface skimming bulk wave delay-line chemical sensors in liquids, Show-Ran Peter Wang
Characteristics of Thailand's automotive industry managers based on the SYMLOG model, Panat Boonkham
Characteristic surfaces for three position motion generation with planar four bar mechanisms, Jeffrey Allen Baumann
Characterization and analysis of the West Lost Trail Creek Landslide, Hinsdale County, Colorado, Nicholas Holger Beckmann
Characterization and applications in infrastructure of steel reinforced polymer and grout composites, Bryce L. Barton
Characterization and implementation of distributed coaxial cable crack sensors for embedment in reinforced concrete structural members, Ryan D. McDaniel
Characterization and modeling for multi-gigabit signaling, Jianmin Zhang
Characterization and modeling of paleoliquefaction features in Missouri, Houda Jadi
Characterization and performance of spontaneously deposited cerium-based conversion coatings on 7075-T6 aluminum alloy, Berny F. Rivera
Characterization and permeability modeling of complex Mauddud-Burgan carbonate reservoir, Waleed Hussein Ali Abbas Ali Al-Bazzaz
Characterization and pollutional contribution of stormwater runoff from a small urban area., John Lamb Wendleton
Characterization and staged lagoon treatment of swine feedlot waste, Abraham H. Loudermilk Jr.
Characterization and synthesis of nanoscale materials, Jinfeng Wang
Characterization and use of an acousto-optic tunable filter for hyperspectral remote sensing, Douglas Michael Papenmeier
Characterization of a horizontal hydraulic fracture in the Warner Sandstone of Nevada, Missouri, Richard George Duff
Characterization of a low-level radioactive waste site, applied to the former Weldon Spring feed materials plant, Weldon Spring, Missouri, William Howard Bond
Characterization of a Mexican halloysitic clay and behavior in dry pressing, Jesus L. Derat
Characterization of an organic solvent (di-2-ethylhexyl phosphoric acid) used in galvanic stripping, Walailak Puetpaiboon
Characterization of a plant gene family expanded in glycine max, Lisa Snoderly-Foster
Characterization of cerium-based conversion coating on 7075-T6 Al alloy, Haifeng Zhou
Characterization of chemical health effects and exposure risk potential for drinking water contaminants, Matthew Aaron Lueders
Characterization of coarse aggregate angularity using digital image processing, Gregory Allen Swift
Characterization of diamond thin films and related materials, Travis K. McKindra
Characterization of environmentally active aerosols: jet engine emissions, Jonathan D. Paladino
Characterization of expanded polystyrene (EPS) and cohesive soil mixtures, Nicholas Thomas Rocco
Characterization of fiber reinforced phenolic composites, Subramaniam Narayan
Characterization of geotechnical variability based upon sampling frequency using Monte Carlo simulation: A study of the kcICON project, Kerry Allen Magner
Characterization of GFRP bars for internal concrete reinforcement, Omar Khelifi
Characterization of heat-treated nickel and gold films on silicon single crystals, Ki Hyun Yoon
Characterization of human-metal reference ESD event and correlation of ESD simulator parameters to system failures and a new calibration method for current probes, Ramachandran Chundru
Characterization of lead sinter by reflected light microscopy and electron microbeam analysis, John Matthew Gaines
Characterization of Liquefaction Sites/Features in the Charleston, S. C. Area, Garry Maurath and David Amick
Characterization of nano-scaled metal-hydrides confined in nano-porous carbon frameworks, David Edward Peaslee
Characterization of near field probes and IC transient current prediction and PDN noise estimation, Tun Li
Characterization of nickel electrowinning from acid sulfate electrolytes, Michael E. Holm
Characterization of noise on PDN and electromagnetic shielding, Sandeep K. R. Chandra
Characterization of non-asbestos friction materials, Feng Dong
Characterization of petroleum fog oil and vegetable oil smokes, Andrew Oliver LaRouche
Characterization of powdered activated carbon, Riteshkumar Jain
Characterization of product relations networks and identification of new product convergence opportunities, Aravind Sankaran
Characterization of pyrite surface and evaluation of effect of absorbed depressants on pyrite flotation, Yungchin Ding
Characterization of Rabinal, Guatemala clay and development of an engineered surrogate for the purpose of laboratory study, Lara Anne Hubbel
Characterization of scrap tires and printed circuit boards pyrolysis products, Shuping Ai
Characterization of selected isolates from hypersaline lakes in Western Australia and Victoria, Australia, Malavika Sinha
Characterization of shielding effectiveness for metallic enclosures, Nicholas Bennett Mentesana
Characterization of silica particles using experimental methods, Siddhartha Nahar
Characterization of soil variability for reliability-based design, Sitenikechukwu Onyejekwe
Characterization of spontaneously deposited ceria on copper and its nucleation, Kurt Thomas Koch
Characterization of ten channel electro-optic phase modulator and amplifier in AlGaAs/GaAs, David Eugene Brown
Characterization of the Bluejacket and Warner heavy oil reservoirs at pore level, Rajeev Gupta
Characterization of the corrosion protection mechanism of cerium-based conversion coatings on high strength aluminum alloys, William R. Pinc
Characterization of the fluid-dynamic mixing of a bottom gas-injected channel reactor using low-temperature modelling, Jay Bernett Gassel
Characterization of the neutron flux spectrum at the Missouri University of Science and Technology Research Reactor, Zachary Andrew Kulage
Characterization of the thermal effects of the solidification of aluminum in a cast iron permanent mold, Marlin Ray Jiranek
Characterization of two Mexican raw dolomites for refractory brick production, Rodolfo Trevino Cantu
Characterization of wave transport in non-conservative media with random and correlated disorder, Benjamin Henry Payne
Characterizations of inner product spaces., John Lee Roy Williams
Characterizing backpropagation neural network architecture response to domain entropy: implementation with a fuzzy logic based expert system, Alice E. Smith
Characterizing backpropagation neural network architecture response to network parameter variation, Elaine R. Raterman
Characterizing formation dredgeability for clamshell dredge, Bismark Osei
Characterizing near-field circuit board radiation using crossed electric and magnetic dipole sources, Weiping He
Characterizing plasma polymers for durable reverse osmosis membranes, Michael Stephen Schmidt
Characterizing superconducting magnetic energy storage systems for grid applications, Dwaraka S. Padimiti
Characterizing topologies by classes of functions and multifunctions, Alexander Hamlin Cramer
Characterizing topologies by continuous selfmaps, Derald David Rothmann
Charcoal production by continuous pyrolysis of amorphous wood residue., Arthur Philip Kuss
Charge transfer between H ˉions and O₂ molecules and D ˉions and O₂ molecules in the ground state., Paul Edgar Chaplin
Charge transfer between OH ˉions and O₂ molecules in the ground state., Clayton Edgar Evans Jr.
Charge transfer between Oˉ ions and O₂ molecules in the ground state and singlet delta excited state, Ronald Floyd Mathis
Charge transport in nano-scale thin-wired network, Lee Tran
Chasing process of the MR SAT Project, Pierre Vignal
Chatter suppression in two-tool parallel turning operations with spindle speed variation method, Peng Guo
Checker board drainage due to eroded dikes, Julian Adolph Hielscher
Checking rigid-framed structures by extended moment-area equations, Lucky Li-Chi Chow
Chelating compounds as potential flash rust inhibitors and melamine & aziridine cure of acrylic colloidal unimolecular polymers (CUPs), Jigar K. Mistry
Chemical analyses of special tool steels, Elmer List
Chemical and mineralogical characteristics of particulates in stack emission from two lead smelters in southeast Missouri., John Fredrick Arseneau
Chemical and physical analysis of steel and iron, John T. E. Ericson
Chemical and ultrasonic conditioning of water treatment plant coagulant sludges, Stanley Louis Klemetson
Chemical characterization of micron and submicron particulate matters, Hongyu Shen
Chemical control -- influence on manufacture and quality of cement, Joseph Owen Hunt
Chemical control work in the N. K. Fairbanks factories, John Whittlesey Bodman
Chemical corrosion of Ag films on glass, Hyun Soo Park
Chemical durability and physical properties of the Ho₂O₃·Al₂O₃·SiO₂ glass system, Daniel S. McIntyre
Chemical durability of Dy₂O₃-Al₂O₃-SiO₂ glasses for use as in vivo radiopharmaceuticals, Amy Louise McIntyre
Chemical kinetics of the zirconium-hydrofluoride reaction, Wayne G. Custead
Chemically durable, AlN-compatible thick film binder glasses, Timothy Emil Harster
Chemical plant design under conditions of risk, Raymond A. Freeman
Chemical precipitation of phosphorous with sodium aluminate and alum in the activated sludge aeration chamber, Richard Charles Vedder
Chemical precipitation techniques for the production of ceramics with controlled microstructure, Xi Yang
Chemical preparation of electrically conducting polyaniline/poly(vinylidene chloride)/poly(vinyl chloride) composite film, Lup Cheong Patrick Hung
Chemical relationship of the Mississippi-Valley type ore deposits in Missouri, Oklahoma, and Kansas., Rolin Lee Geronsin
Chemical risk in early design, Carlton Ashley Washburn
Chemical spray pyrolysis of cadmium telluride., Alok K. Berry
Chemical synthesis of monocalcium aluminate powders, Hongsang Rho
Chemistry and fate of toxic heavy metals in municipal waste treatment system., Rodney Kent Breuer
Chemistry of Al metal additions during thermal treatment of calcium aluminate/graphite mixtures, Mitchell Robert Fait
Chimney Foundation on Drilled Piers, K. Y. C. Chung and L. D. Cundy
Chlorinated polyolefin adhesion promoters for polypropylene, William L. Dechent
Chromatographic determination of hydrocarbons based on retention time data for squalene and tetracyanoethylated pentaerythritol columns, Mehdi Honarpour
Chrome-free refractories for copper production, Michael D. Crites
CIEGEN: a system for testing knowledge base compilation heuristics on a microcomputer, Jayne D. Ward
Circuit model extraction in digital and RD circuits using the partial element equivalent circuit (PEEC) method, Jingkun Mao
Circuit simulator using library functions, K. Hemanth Kumar
Circular arch analysis, Aylmer Pao-Sheng Cheng
Circular polarization from a corner reflector antenna with tilted dipole of arbitrary length, Ruben A. Carrizo M.
City of Rolla stormwater management model, Jeffery W. East
Clamped cubic spline graphing of particle size distributions with application to Exeter and Sheep Pen Sandstones in northeastern New Mexico, Patrick Searle Mulvany
Classical Hamiltonian dynamics of a particle interacting with the vibrational modes of a one-dimensional medium, Alex A. Silvius
Classification and computer analysis of high-frequency resonant inverter circuits., Vietson Minh Nguyen
Classification characteristics of SOM and ART2, John Joseph Aleshunas
Classification of fine particles using a Taylor-Couette device, Navina Durgaiah Tungapindi
Classification of surficial materials, James Hadley Williams
Clay mineralogy and compaction characteristics of residual clay soils used in earth dam construction in the Ozark Province of Missouri, Arthur David Alcott
Clay Shale Foundation Slide at Waco Dam, Texas, W. R. Stroman, R. R. W. Beene, and A. M. Hull
Client/Server development : a solution to software development failure?, Kristin Patricia Piskulic
Clipper amplitude modulator, Durmuş Öcal
Closed-form solutions to discrete-time portfolio optimization problems, Mathias Christian Goeggel
Closed loop map estimation of time varying delay, James C. Myers
Cloud security requirements analysis and security policy development using a high-order object-oriented modeling technique, Kenneth Kofi Fletcher
Clustering of fourbar mechanisms, Todd E. Sparks
Coal conversion for an island utility, John M. Benavente
Coal disintegration using high pressure water jets : mechanism study, Lalith Hiran Wijeratne
Coal dust explosions and their prevention, Surya Narayan Roychowdhury
Coal log compaction with hydrophobic binders for pipeline transportation, Bing Zhao
Coal log pipeline wastewater evaluation and treatment alternative evaluation, Nicole Marie Pagano
Coal mine safety engineering, Charles F. Herbert
Coal washing, Mark S. Sheffer and Thomas Andrew Stroup
Coastal Bluff Retreat at Big Lagoon, California, R. C. Chaney and D. C. Tuttle
Coating Effects of Cold-formed Steel Deck Slabs, Max L. Porter and C. E. Ekberg Jr.
Co-evolutionary automated software correction: a proof of concept, Joshua Lee Wilkerson
Cogeneration feasibility study for UM-Rolla, Reinis Leveika
Cognitive and cellular levels of synchronization in the central nervous system, Roxana Patricia Contreras
Cognitive biases in risk management, William Thomas Siefert
Cohesive zone modeling of quasi-static crack growth in two dimensional cracked specimens, Uday Idnani
Coke, Temple Dyer
Cokriging, kriging and trend surface analysis : a comparative study of estimation techniques in geologic mapping, Mark Janus Freund
Colbond Drains for Rapid Consolidation at Manggar Besar Dam, M. C. Goel, Achmad Zainiko, and J. L. Surabaya
Cold-formed Folded Plate Structures, Wilbur C. Schoeller, Richard H. J. Pian, and Harry R. Lundgren
Cold Formed Standard Steel Products in a Low Cost House Construction Method, Robert W. Dannemann
Cold Formed Steel Applications Abroad, Rolf Baehre, Bao-Kang He, Gerard Moreau, Kazumi Sakae, E. R. Bryan, and Teoman Peköz
Cold-formed Steel Bolted Connections Using Oversized and Slotted Holes without Washers, Phase 2, American Iron and Steel Institute
Cold-formed Steel Bolted Connections without Washers on Oversized Slotted Holes, Phase 1, American Iron and Steel Institute
Cold-formed Steel Compression Members Embedded in Grain, Ahmed Sabry and George Abdel-Sayed
Cold-formed Steel Construction in the People's Republic of China, Zhang Zhong-Quan
Cold-formed Steel Design Manual, American Iron and Steel Institute
Cold-formed Steel Design Manual, American Iron and Steel Institute
Cold-formed Steel Design Manual, American Iron and Steel Institute
Cold-formed Steel for Students a Website, Roger A. LaBoube and C. M. Stratman
Cold-formed Steel Frame and Beam-column Design, Andrew T. Sarawit and Teoman Peköz
Cold-formed Steel Framing Seismic Design Optimization Phase 1a: Seismic Equivalency Parameter Evaluation, American Iron and Steel Institute
Cold-formed Steel Framing with Gypsum Facing, John L. Lutfallah and Frederick A. Thulin Jr.
Cold-formed Steel Gable End Wall Design Using the Prescriptive Method for One and Two Family Dwellings, Benjamin W. Downey, Sutton F. Stephens, and Roger A. LaBoube
Cold Formed Steel in Folded Truss Decks, Robert W. Dannemann
Cold formed steel in residential roof trusses, Michael M. Harper
Cold-formed Steel Rack Structures, George Winter and Teoman Pekoz
Cold-formed Steel: Research to Design, Albert L. Johnson
Cold-formed steel structural elements subjected to time-dependent loading, Charles G. Culver
Cold Formed Steel Tension Members with Two and Three Staggered Bolts, D. M. Fox and R. M. Schuster
Cold-formed Steel Top Load Bearing Tracks, NAHB Research Center, Inc.
Cold-formed Steel Wall Stud Design, Amir Imaan and Teoman Pekoz
Cold-formed Steel Walls with Fiberboard Sheathing - Shear Wall Testing, NAHB Research Center, Inc.
Cold-formed Steel Z-sections under Axial Load, Dimos Polyzois and A. Sudharmapal
Cold-forming Residual Stresses Effect on Buckling, Lars Ingvarsson
Cold load pick up: the electrical space heating component, Walter William Lang
Cold-rolled austenitic stainless steel: materials properties and structural performance, George Winter and S. T. Wang
Collaborative information seeking: A study of a patient care team in the emergency department, Patricia Ruma Spence
Collaborative multi-agent architecture simulation using mobile robots for path planning in unknown environments, Karthik Gopalakrishnan
Collaborative solid modeling using Java3D, Yamini Lakshmi Natarajan
Collapsible Soils Chashma Right Bank Canal, Izharul Haq
Collapsing Peak Up of a Large Highway Steel Pipe-Arch, Minh Phong Luong
Collection of cloud condensation nuclei for chemical analysis, Steven D. Medley
Collective behavior in robots using evolutionary neural networks, Vikram Aedula
Collision and pursuit course terminal closures for spacecraft to satellite rendezvous, John Anthony Campbell
Collision dynamics for electron removal from helium and molecular hydrogen by heavy ions, Christopher J. Wood
Collisions between slow highly charged ions and surfaces, James A. Perez
Color analysis in boundary areas of skin tumor images for melanoma diagnosis, Jixiang Chen
Coloration of glass by high energy radiation, Thomas L. Nickens
Color computer graphics as applied to introductory calculus instruction, Kathy Sue Windhorst
Column Behaviour of Cold-formed Hollow Sections, Peter W. Key, S. W. Hasan, and Gregory J. Hancock
Column research council proceedings, Fritz Engineering Foundation
Column research council: proceedings 1969, Column Research Council
Column research council: proceedings 1970, Column Research Council
Column research council: proceedings 1971, Column Research Council
Column research council: proceedings 1973, Column Research Council
Column research council: proceedings 1974, Column Research Council
Column research council: proceedings 1975, Column Research Council
Combat engineer one station unit training test., Dennis Wayne Crowe
Combination permanent magnet generator and exciter, Robert Francis Lambrecht
Combined Compression and Lateral Loads on Load Bearing Steel Stud Walls, Paul G. Schurter, R. M. Schuster, and Andrew S. Zakrzewski
Combined dual fuel operation of a stratified charge engine using methanol and gasoline, Daniel Joseph Schlueter
Combined Earth and Rock Bearing Foundation - Hospital Humana Mexico City D.F., Michael R. Stomer, Pablo Girault, and L. E. Wilson
Combined forced and free convection on a vertical cylinder and flat plate, Aleksandros Mucoglu
Combined heat and mass transfer in mixed convection on stationary and continuous, moving plates., Forrest Arthur Strobel
Combined heat and mass transfer in natural and mixed convection., Ching-Fen Yuh
Combined reaction and distillation : a study of esterification, Chung-Shih Pien
Combustion aerosols: sampling & characterization, Prafull Subhash Gandhi
Combustion of aqueous ammonium sulfate containing industrial waste streams, Brian Keith Ricker
Commentary on the 1961 Edition, George Winter
Commentary on the 1962 Edition, George Winter
Commentary on the 1968 Edition of the Specification for the Design of Cold-formed Steel Structural Members, George Winter
Commentary on the Specifications for the Design, Testing, and Utilization of Industrial Steel Storage Racks, Rack Manufacturers Institute
Commentary on the Specifications for the Design, Testing, and Utilization of Industrial Steel Storage Racks, Rack Manufacturers Institute
Commercial design of four indirect-fired fluidized bed gasifer systems, Eoin Myles Clancy
Commercial mineral waters of north-central Texas, Shirley Alfred Lynch
Common- and differential-mode signaling and filtering, Zhe Li
Common mode current estimation for cable bundle inside a vehicle, Dazhao Liu
Common roads, Arthur Neustaedter
Common-Sense Foundation Design, Sven Hansbo
Communication models for monitoring and mobility verification in mission critical wireless networks, Maheswaran Thiagarajan
Communication protocols for integrated fiber optic sensor interrogator, Tameem Ahmed Khan
Compaction and Chemical Grouting for Drain Tunnels in Phoenix, T. J. Lyman, M. J. Robison, and D. S. Lance
Compaction characteristics of fine grained soils., Lewis Clyburn Sowell
Compaction-Induced Distress of a Long-Span Culvert Overpass Structure, Raymond B. Seed and Chang-Yu Ou
Comparative analyses of geophysical methods for determining shear wave velocity of soils, Thanop Thitimakorn
Comparative analysis of helical anchor design methodologies, Rachel Jeanne Schiller
Comparative analysis of numerical integration techniques, Edward Lee Sartore
Comparative analysis of polynomial root finding techniques, Charles Ray O'Daniel
Comparative development and osteogenesis of cranial and post-cranial elements in pelobatid tadpoles (anura: pelobatidae), Barbara L. Banbury
Comparative evaluation of N-acetylcysteine and N-acetylcysteine amide in acetaminophen-induced oxidative stress, Ahdab Naeem Khayyat
Comparative evaluation of regionalized stormwater detention, John Antony McEnery
Comparative performance of conventional and baffled activated sludge systems, Terris Lee Cates
Comparative performance of rotating biological contactors using air and pure oxygen., Valentino Travis Bates
Comparative petrographic, petrochemical and spectrographic analyses of the Precambrian granitic rocks of southeastern Missouri, Eva B. Kisvarsanyi
Comparative study of design methods for cold-formed steel., Brian K. Snyder
Comparative Study of Load and Resistance Factor Design vs. Allowable Stress Design, Brian K. Snyder, Lan-Cheng Pan, and Wei-wen Yu
Comparative study of the boundary element technique and the finite element method in two dimensional eigenvalue problem, Farough Baradari
Comparative study of the collecting property of naphthenic acids with oleic acid as applied to calcite, hematite, barite, and fluorspar, Siddhi Nath Mukherji
Comparative tests of piston-drill bits, Lister Merriken Cummings
Comparative tests of rock drill bits for piston machines, Thomas C. Robson and Miguel Leon Cepeda
Comparative value of various grog materials for the manufacture of zinc retorts, Wei-Tung T. Hu
Comparing a set of K statistical populations with respect to a control, Linda Marie Penas
Comparing community resources to industrial needs with application to Daviess County, Missouri, Jay Eldon Waggoner Jr.
Comparing the chelating abilities of N-acetylcysteine and N-acetylcysteine amide in vitro for lead poisoning treatment, Weiqing Chen
Comparison and evaluation of web crippling prediction formulas, Monique Bakker and Teoman Peköz
Comparison of active structural acoustic controllers, Michael Lewis Hill
Comparison of AISC Specification for the Design, Fabrication & Erection of Structural Steel for Buildings and AISI Specification for the Design of Cold-Formed Steel Structural Members, Wei-wen Yu and Chung-Yuan Tung
Comparison of class II injection well area of review requirements with area of evaluation for hydraulically fractured wells, Yashesh Jitendra Panchal
Comparison of combustion sources and measurement techniques for particulates emitted from engines and a power plant, Matthew F. Chandler
Comparison of core control and geophysical investigations, silica sand deposits, Dawmat Al Jandal, Al Jawf at Saudi Arabia, Ghassan Salem Alsulaimani
Comparison of costs of personal protective equipment for all workers to avoid costs of fall accidents, Sultan Noori Al-karawi
Comparison of dashboard-based and balanced scorecard-based corporate performance management system, Lin Zhu
Comparison of electrical, mechanical and hydraulic systems utilizing an exponential model to analyze existing Army data, Kathleen Doyle Biddlecombe
Comparison of energy consumption of common heating, ventilating, and air conditioning systems with closed water loop heat pump systems, Jawad Hussain Zaidi
Comparison of fermentors for acetone/butanol production., James Anthony Conheady
Comparison of finite difference and finite element methods for the solution of Smoluchowski equation, Chang-Ho Kim
Comparison of finite element analysis and finite difference methods for partial differential equations, Vinay Anneboina
Comparison of indicator co-kriging to disjunctive kriging for earthquake parametric estimation, Eddy Dadi Deng
Comparison of in-planta sampling methods for delineating groundwater contaminants, Kendra Marie Waltermire
Comparison of M880 and Dodge 1 1/4 ton truck operation and maintenance, Samuel Alan Stone
Comparison of Matrix Pencil and Prony analysis for estimating electromechanical modes in noisy signals for power system applications, Lisa L. Grant
Comparison of measured and calculated stiffnesses for lightweight normal concrete beams, Raman Patel
Comparison of measured and calculated transmutation in copper at spallation neutron sources, Timothy Brian O'Hearn
Comparison of Methods Predicting Diaphram Behavior, Paul E. Liedtke and Donald R. Sherman
Comparison of methods to select a probability model, Howard Lyndal Colburn
Comparison of numerical simulation results for a belt drive dynamic analysis, Chaofu Qin
Comparison of operating expenses and capital expenditures of two different types of boiler rooms covering extensions expected during the next twenty years, George Hewitt Boyer
Comparison of plastic stress-strain material properties as determined from conventional experiments, Wen Mo Chen
Comparison of queue clearance models for multilane approach opposing permissive left turns, Rohit Lasod
Comparison of scatter storage techniques using an analysis of variance model, Robert Lee Kitsch
Comparison of selected results of two building energy analysis programs : axcess and PC-DOE, Kathy L. Schmitt
Comparison of square root of time approach and statistical approach to minimize subjectivity in the determination of minimum in-situ stress, Soumitra Bhaskar Nande
Comparison of the Buckley-Leverett technique with a numerical simulation model containing heterogeneity and capillary pressure, Krishna Kumar Singh
Comparison of the distance squared and one-zero weighting functions in constrained restoration filter performance, Robert Paul Landstrom
Comparison of the performance of a matched filter receiver and a median filter receiver in the presence of additive white Gaussian noise and additive Gaussian impulse noise, Kambiz Aynessazian
Comparison of treatment technologies on a pilot scale for the removal of fuel oxygenates from natural groundwater, Justin M. Sutherland
Comparison of Two Excavation Support Systems in Clay: Central Artery Tunnel, Boston, Massachusetts, USA, Siamac Vaghar and Dan J. Bobrow
Comparison of uniaxial compressive strength test and slake durability index values of shale samples from the Breathitt Formation, Kentucky, Engi̇n Caner Koncagül
Comparison of various types of road surfacing, Charles Cyrus Tevis
Comparisons Between Field and Analytical Behavior of an Experimental Excavation, Roberto Azevedo and Nilo Consoli
Compensator design for unity feedback systems on the digital computer., Ping Liang
Compensator design for unity feedback systems using an analytical method, Chang-Yu Wu
Competitive adsorption of organics by activated carbon., Charles Thomas Steffens
Complementary codes and their radar ambiguities., Bruce D. Nelson
Complementing Radiologic Data With Geology – A Case History, Dennis McGrane
Complete classification of spherical four link mechanism, Jennhwa Lo
Completeness and related topics in a quasi-uniform space, John Warnock Carlson
Complete sets of reductions modulo A class of equational theories which generate infinite congruence classes, Timothy B. Baird
Complex oxides as novel transparent conductors, Altynbek Murat
Complex reactions in porous media, Dar-Sen Horng
Complex scaling behavior in animal foraging patterns, Prabhavi Kaushalya Premachandra
Compliant mechanism synthesis for energy and torque specifications, Yuvaraj Annamalai
Component library development tool for EMC expert system, Ravikant Atreya
Composite beams in building constructions., Mahendrasinhji M. Jhala
Composite Cold-formed Steel-concrete Structural System, George Abdel-Sayed
Composite Construction- Applications, Albert J. Oudheusden
Composite Diaphragm Behavior and Strength, W. Samuel Easterling and Max L. Porter
Composite graph coloring algorithms and applications, Stephen Yek Hong Seng
Composite Ground Modification System: Vibroreplacement and Dynamic Compaction, Salt Lake County Detention Center, Utah, Roberto A. López, Mathew J. Francis, Kyle M. Rollins, Scott W. Davis, and Zoran Batchko
Composites from renewable resources: Development of a soybean-oil based composite, Robert A. Babcock
Composite Slabs Subjected to Repeated Point Loading, R. M. Schuster and Ramadan E. Suleiman
Composite Slabs with Steel Deck Panels, Larry D. Luttrell and James H. Davison
Composite Steel Deck Diaphragm Slabs -- Design Modes, Max L. Porter and Lowell F. Greimann
Composite structures using asphalt based roofing scrap materials, Timothy Shanahan Moran
Comprehensive evaluation of a computer based learning system, Arun Sharma Chintalapati
Comprehensive Seepage Assessment: Beaver Dam, Arkansas, J. L. Llopis, C. M. Deaver, D. K. Butler, and S. C. Hartung
Compressibility effects on transient gas pipe flow, Gerald Francis Mouser
Compression Tests of Cold-formed Steel Columns, C. C. Weng and Teoman Peköz
Compressive Buckling of Perforated Plate Elements, W. P. Vann
Compressive creep of basic refractories, Maurice E. Green
Compressive creep of high alumina refractories, Vernon Lee Burdick
Compressive creep of magnesium-aluminate spinel synthesized from natural raw materials for refractory applications, Brad Steven Monton
Compressive sensing for 3D microwave imaging systems, Hamed Kajbaf
Compressor valve failure detection and prognostics, Raghuram Puthali Ramesh
Computational aerodynamics of low aspect ratio missiles in supersonic flow, Brent Williams Bossi
Computational aerodynamics of supersonic missiles with noncircular cross section, Brian Edward Est
Computational analysis of wave rotor flow, Dawn Lynn Gregory
Computational fluid dynamics flow comparison between openhole sleeve and plug-and-perf completion in a hydraulic fractured horizontal well, Viriyah Theppornprapakorn
Computational intelligence and the traveling salesman, Samuel A. Mulder
Computational intelligence methods in wireless sensor networks, Raghavendra V. Kulkarni
Computational intelligence techniques for collective robotic search, Sheetal Doctor
Computational investigation of plasma actuator as an active flow control strategy of laminar separation bubbles, Justin Roger Aholt
Computationally complex, nonlinear systems modeling using neural networks, Xiao Hu
Computational methods for the discovery and analysis of genes and other functional DNA sequences, Cyriac Kandoth
Computational models of learning., Kenneth Jesse Marse
Computational study of flow over elliptic airfoils for rotor/wing unmanned aerial vehicle applications, Timothy William Assel
Computational study of impulsive and accelerating flow over NACA0015 airfoils at high angles of attack, Deborah Anne Engelmeyer
Computational study of unsteady separated flowfields surrounding a flapping airfoil and their relevance to micro-air vehicles, Keith Philip Gray
Computational techniques for the design of multistage counter current extraction processes., Thomas Karl Mills
Computations for three mode control, Sheila D. Witt
Computer Aided Analysis of Thin Walled Structural Components Subjected to Axial and Bending Crush Loads, H. F. Mahmood and S. H. Abed
Computer-aided circuit optimization including the adjoint method of calculating network sensitivities, John Walter Olson
Computer-aided design of an active mixer at X-band, Yisok Oh
Computer-aided design of cold-formed steel structural members, Mary Therese Zuehlke
Computer-aided design of coupled-line microwave bandpass filters, John Leo Meier
Computer-aided design of lossless non-uniform transmission lines, Larry Lee Wesner
Computer aided design of microstrip antennas, Joseph William Martinosky
Computer aided design of three dimensional mechanisms for function generation, Wei-Shing Chiou
Computer aided diagnosis of skin cancer using texture analysis on images, Sundararajan Muruganandhan
Computer - aided interpolation of spatial surfaces., Gary W. Wilcox
Computer-aided network synthesis, James H. Hahn
Computer-aided sampling and surface interpolation., Michael David Turner
Computer aided software tool for design of dental bar, Amit Atmaram Gawate
Computer Aids for the Design of Cold-formed Steel Structural Members, Paul A. Seaburg
Computer analysis of 3-phase induction motor operation on an open-delta distribution system, S. Clark Seematter
Computer architecture for small batch automated manufacturing, Amy Lynn Bryant
Computer assisted control of robotic rock drilling equipment using rock face image mapping, William Robert Macneil
Computer assisted identification of surveillance testing requirements associated with commercial nuclear power plant mode changes, James Earl Davis
Computer assisted teaching of steel design, Wendelin Henry Mueller III
Computer automated dental bar design for removable implant-based dentures, Sai Gowthami Asam
Computer based face recognition using neural networks: a biometric access control system based on the human face, Usamah M. S. Altaf
Computer-controlled-automated jumbo drilling robot manipulator, Jianchi Yao
Computer-controlled processing of radar precipitation signals and lightning data, Gary Wayne Neal
Computer control of a PBX Washout Plant, Scott Cameron Sharp
Computer control of experimental data acquisition, Wen-Cheng Shiau
Computer integrated fixture planning and process planning, Jin Yu
Computer integrated manufacturing technology applied to industrial wastewater pretreatment process management for small scale facilities, Sheela Nilam Yadav-Olney
Computer investigation of turbulent recirculating flows., Michael A. Ellicott
Computerized arrangement of vocal music, Matt D. Johnson
Computerized methods for estimating heating-cooling-ventilating system usage in all-electric buildings, Carl William Glaser
Computerized proofs of hypergeometric identities: methods, advances, and limitations, Paul Nathaniel Runnion
Computerized registration for high schools, Kenneth Lee Fore
Computerized truck scheduling: multiple dispatch delivery., Peter Joseph Stoddard
Computer modeling to evaluate capital and operating costs associated with aggregate resource potential of subsurface northern Missouri limestone units, Kevin Scott Campbell
Computer recognition of objects based on shape analysis, Anurag Goel
Computer Science Building, Missouri University of Science and Technology
Computer simulation and analysis of a multipath fading channel, Katayoun Sohrabi
Computer simulation in optimizing service system operations, Marjorie Diane Clements
Computer simulation model of a hydroabrasive jet cutting process, Mike Corcoran
Computer simulation of a brain slice using fractals, Timothy Lee Culver
Computer simulation of a flexible manufacturing system with scheduling applications using SLAM II, Delilah Cuizon Chanrasmi
Computer simulation of a residual excited linear predictive speech coder, Gary Rubel
Computer simulation of Cauer filters, Amir Mahmoud Shahnazary
Computer simulation of Lennard-Jones fluids in porous silica, Karthik Raghavan
Computer simulation of pressureless sintering of ceramic matrix composites, Paul Raj
Computer simulation of radiation damage in Fe₃Al, Roland Otto Jackson
Computer simulation of radiation effects in Fe₃Al by using alternating direction implicit numerical techniques., Dean Lewis Tibbitts
Computer simulation of scraper-pusher behavior during early open pit mining operations, Martin Alan Thieme
Computer simulation of surface mine haulage systems using GPSS., Li-Jen David Kuo
Computer simulation of the primary recoil spectra and damage cross section of Fe₃Al using ENDF/B II data, Daniel Willard Smith
Computer solutions to depletion drive hydrocarbon systems, Tu Kao Chen
Computer techniques for the estimation of missile radar cross sections., Charles Edward Michael Raiff
Computer time-sharing (T-S) "an engineering tool" for the engineering applications of the small company, James Binford Summers
Computer vision in medicine: color metrics and image segmentation methods for skin cancer diagnosis, Scott E. Umbaugh
Computer vision in medicine : identification of variegated coloring in digitized skin tumor images, Scott E. Umbaugh
Computer vision in medicine : texture analysis algorithms for skin cancer diagnosis, Chang-Sung Chiang
Computer vision techniques for detecting semitranslucency as an aid to skin cancer diagnosis, Kuang-Fu Chu
Computer vision techniques for symmetry analysis in skin cancer diagnosis, William Weiling Li
Computer vision techniques for texture analysis in skin cancer diagnosis, Jung-Chieh Chang
Concentration by sorting : Feasibility determination by radial distribution analysis, Robert M. Doerr
Concentration induced stress effects in diffusion of vapors through polymer membranes, Myungsoo Kim
Concentration of a Joplin slime by flotation, Earl Joseph Weimer and Walter Harry Freudenberg
Concentration of an oxidized lead ore from Southeast Missouri, Robert Edward Evans
Concentration of fluorspar ores in the Illinois-Kentucky District, Omar Watson Greeman
Concentration of ores by flotation, John Gay Reilly and Frank Stillmann Elfred
Conceptual design, development, and simulation of a tilt-duct unmanned aerial vehicle with vertical takeoff and landing capabilities, Peter Gabriel Cross
Concerning the expansive property and shift homeomorphisms of inverse limits, Fredrick Edward Worth
Concrete cover delamination in reinforced concrete beams strengthened with CFRP sheets, Gustavo J. Tumialan
Concrete roughness profile characterization using laser profilometry for better bond strength with fiber reinforced polymers, Poornima Chepur
Condensation along an isothermal vertical surface in mixed convection, Chad Michael Winkler
Condensation and sublimation of carbon dioxide and water molecules at cryogenic temperatures, Victor Cazcarra
Conductivity and ionization of certain salts in absolute alcohol, Armin Brene Jewell
Conductivity and photoconductivity mechanisms of iron and magnesium doped lithium niobate, Joseph Francis Kirchhoff
Cone deformation eutectics using sodium chloride, dolomite, and alpite rock, William K. Schweickhardt
Conferences, Missouri University of Science and Technology
Confidence intervals of bit error rate estimates of digital communication systems, T. F. Chang
Configurable digital controllers for smart structural systems using field programmable gate arrays, Venkat Satagopan
Configuration, manufacture, assembly, and integration of a university microsatellite, Lori Ann Ziegler
Conflict resolution in project management teams, Parul Khaneja
Connection Strength in Thin Metal Roof Structures, Robert W. Haussler and Richard F. Pabers
Conodonts from the Marathon basin, Brewster County, Texas, Roy William Graves Jr.
Considerations for rapidly converging genetic algorithms designed for application to problems with expensive evaluation functions, Richard Patrick Rankin
Considerations in the design of a network of minicomputers, Hardy J. Pottinger
Considerations in the design of interactive real-time data acquisition computer programs., Richard Thomas Wurth
Considerations of the dynamics of the Poincaré map acting on the attractor of the Newton-Leipnik system, Benjamin Arthur Marlin
Constant horizontal force machining through flash welded steel bars of varying hardness, Donald Naeger
Constitution and properties of manganese-copper alloys, James Harrison Jacobs
Constrained completion: Theory, implementation, and results, Daniel Patrick Murphy
Constrained LQR-based controller for disturbance rejection, Viswanath Tolety
Constraining the crystallization and post-crystallization history of the Wallamatogus Pluton, Maine, using compositional data from garnet, biotite and muscovite, Joy Kathleen Drake
Constraint based node localization for ad-hoc wireless networks and a simulation environment for wildfire detection & mapping using wireless sensor networks, Michael Ellebrecht
Constructability and performance of concrete members prestressed with CFRP tendons, Xiang Yan
Constructed wetlands for lead and zinc removal in lead mine drainage, Chad Ross
Constructing conducted emission models for integrated circuits, Shuai Jin
Construction and maintenance of Kansas City boulevard pavements, Ralph Robert Benedict
Construction and operation of a vacuum retort pilot-plant for distillation of alloys, Robert Frederick Doelling
Construction and testing of a high temperature air bath., Edward Gerard Latimer
Construction and test of equipment for use in ultrasonic pulse echo studies., Charles Joseph Reinheimer
Construction details and general discussion of the 10 watt radio telephone transmitter at the Missouri School of Mines, Leonard Oliver Williams
Construction of a capillary viscometer and the study of non-Newtonian liquids, Hsun Kuang Yang
Construction of a concentrating plant in the Waco area of the Tri-State District, William Henry Backer
Construction of a Double Tunnel with Ground Windows, Helmut Meissner and Günter Borm
Construction of a laboratory type, convertible excitation argon laser, Arthur P. Reckinger
Construction of a pulsed perforated-plate extraction unit, Clarence James Vetter Jr.
Construction of a system for laser Doppler measurements of turbulence in two-phase stratified liquid/liquid flows, Shaun Patrick Hennessey
Construction of capacity-efficient product families using optimization and simulation tools, Jesse Alan Grisham
Construction of digital three-dimensional geologic environments for a subsurface investigation simulator, Jon Brian Isaacson
Construction of distillation solvent recovery system, Joseph Richard Aid III
Construction of Hydel Power House in Weak Rocks, K. K. Kapoor and S. C. Patodiya
Construction of Inchon International Airport, Eun Chul Shin and Bang-Woong Shin
Construction of Road Embankments over Very Soft Soil Using Band Drains and Preloading, John D. Nelson and Brian P. Wrench
Construction of the Key Lake Tailings Facility, R. B. Knight and J. P. Haile
Construction Problems with an Earth and Rockfill Dam, Hasan Hejazi
Construction time and cost control using the IBM Project Management System/360, James Donald Bailey
Consumption and uses of crude barite and its derivatives, Peter Simonds
Contact plane concentration, John A. Rogers and George Walter Dean
Contamination effects on the bond strength of reinforcing bars under pullout tests, Matthew K. Swenty
Content based image retrieval for bio-medical images, Vikas Nahar
Contents and Preface -- Volume II, Wei-wen Yu and Joseph H. Senne
Continuous control of lunar orbits via electric propulsion, Sunil Aggarwal
Continuous countercurrent evaporation through porous water-repellent membrane with pressure above atmospheric, Yung C. Hsu
Continuous low thrust for small spacecraft proximity operations, James Harris Meub
Continuously tapered dielectric matching transitions for waveguides, William E. Hord
Continuous monitoring of bioactive glass conversion using optical biosensors, Prajakta Bhagwat
Continuous plasma polymerization for preparation of composite reverse osmosis hollow fiber membranes and of biomedical plastic tubings, Yasuo Matsuzawa
Continuous purlin tests, Teoman Peköz
Contouring and analysis of rock hardness and point load strength index values for the Bethany Falls, Winterset, and Argentine Limestones in the Greater Kansas City Area, John Robert Cramer
Contour map, Isaac Peter Frazier
Contractor quality control: A method of construction inspection, John Scott Treadwell
Contrast enhancement of digital mammography based on multi-scale analysis, Muhammad Imran Khan Abir
Contribution-based priority assessment in a web-based intelligent argumentation network for collaborative software development, Maithili Satyavolu
Contributions to the electrical and mechanical phase diagram of PLZT, Dwight Douglas Viehland
Control and applications of double input DC-DC power electronic converters, Venkata Anand Kishore Prabhala
Control and design considerations in electric-drive vehicles, Shweta Neglur
Control and operation of multiple distributed generators in a microgrid, Shyam Naren Bhaskara
Control aspects of a double-input buckboost power electronic converter, Deepak Somayajula
Control, interaction mitigation and location for FACTS devices, Liangying Dong
Controlled Breaching of a Full Scale Clay Flood Bank, A. Marsland
Controlling strength and permeability of silica investment casting molds, Darryl M. Kline
Control of a glass bead furnace, James Donald Feher
Control of a hydraulic system with a personal computer, Donald Eugene Underwood
Control of a single-link robotic arm using artificial neural networks, Edward Thomas DiBuono
Control of dross formation and its removal from lead bullion, Liming Wang
Control of dross formation during lead refining, Seongwon Kang
Control of friction and backlash in a machine tool feed drive system, Keshav Menon
Control of highly-deformable shell structures with embedded smart materials, Chun-Shan Gu
Control of oxygen and carbon impurities in Czochralski-grown silicon by altering the standard atmosphere and materials, Paul Graham McLaughlin
Control of rock fragmentation through explosive coupling / Timothy Wayne Warden., Timothy Wayne Warden
Control of smart structural systems using multi-objective optimization techniques, Sridhar Sana
Control of Surficial Slides by Different Erosion Control Techniques, T. K. Natarajan, A. V. S. R. Murty, and Deep Chandra
Control of the attitude system for the UMR SAT project, David Randall Walker
Control of Uplift from Ground Water, R. V. Sarsby
Control oriented thermal modeling of lithium ion batteries, Derek Brown
Control system design for thermomechanically integrated olefin/parafin separation, Clifton Joe Toombs
Convective-diffusive transport in Krogh Cylinder, Nandini Madhukar Sane
Convective heat transfer in small cylindrical enclosures heated from below, Donald Wayne Land
Convective heat transfer in small enclosed air spaces., Joseph Charles Kroutil
Convergence of Fourier series and representations of Fourier and Fourier-Stieltjes coefficients, Dimitrios G. Natsis
Convergence of material balance in mathematical simulation of petroleum reservoirs, Abdul Rashid Merchant
Convergent solutions of difference equations, W. J. Fitzpatrick
Converting some global optimization problems to mixed integer linear problems using piecewise linear approximations, Manish Kumar
Conveyor mining in the thin vein coal fields at Excelsior, Arkansas, Bernard Degen Boyd
Cooperative power control approaches towards fair radio resource allocation for wireless network, Liuju Wu
Co-optimization: a generalization of coevolution, Travis Service
Coordinated strategic planning of hydroelectric energy usage using Stochastic Dynamic Programming with decoupled production cost simulation, Duane David Highley
Coordination chemistry studies of pyridoxal and sparteine, James T. Wrobleski
Coordination of transportation systems of the United States, Herman Blickensderfer
Copper bismuth alloys, Samuel Marshall Greenidge
Copper electrocrystallization in electrorefining and electrowinning systems, Ersan Ilgar
Copper matting blast furnace run, John Vivian Stevens, Frank Bowman Powell, and John Dozier Shanks
Copper mining at Cananea, Sonora, Mexico, Albert Hill Fay
Copper mining in South America, Charles Kenneth Rose
Copper ores and deposits of Shannon County, Missouri, John D. Greason
Copper smelting in a rotary furnace with pulverized charcoal, Elmer Cooper Heck
Copper sorption by biofilm extracellular polymeric substances, Amanda Jean Withers
Coprecipitation of metal salts with organic coprecipitants, Omar E. El-Arini
Copyright, Missouri University of Science and Technology
Corals of the St. Louis Limestone in the area of Calhoun County, Illinois and St. Louis County, Missouri, William Earl Collins
Cordierite glass-ceramics as glaze materials for refractory forming tools, F. Scott Miller
Coring of Soft Soil-like Rock Material, Marc C. Bétournay, C. Mirza, and K. C. Lau
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Cornell University School of Civil Engineering Tests on light beams of cold-formed steel, Cornell University School of Civil Engineering
Corner detection and edge following for image analysis of prismatic parts, Sriram Srinivasan
Corporate packaging management: "An integrated approach", Stephen A. Raper
Correlation between drying times of a vinyl copolymer solution and properties of dried films., Abd El-Rahman M. Naser
Correlation Between the Actual and Predicted Settlements of Structures at Nsukka, Nigeria, H. O. Chukweze
Correlation functions for use in small angle x-ray scattering, James Edwin Thomas Jr.
Correlation of chemical structure and distensibility of polyesters., Nitin Jhaverbhai Bhimani
Correlation of drag reducing data in dilute polymer solutions, Jorge Mario Rodriguez
Correlation of dust-count results by Zeiss konimeter and midget impinger, Chandmal Jain
Correlation of fall-cone and Casagrande device for Atterberg limits, Muhammad Jamil
Correlation of particulate theory and behavior of real soils, Christopher Byron Groves
Correlation of soil density and erosion features on reclaimed surface mined land, Donald Lee Baum
Correlation of weir crest depth, Froude number, H/P ratio, weir thickness, Paul Harrawood
Correlations for pool boiling heat transfer, Sivaram Vurakarnam
Correlative tracking of pseudo-noise codes using a filtered reference, Hettiachchi Upul Gunawardana
Corrosion and electrochemical behavior of Indium and Indium-Bismuth alloys in hydrochloric acid, Yar Ming Wang
Corrosion and polarization characteristics of single crystal and polycrystalline zinc surfaces, Dharmalatha Abayarathna
Corrosion inhibition of steel by polyaniline, Yasir Idlibi
Corrosion in magnesium and a magnesium alloy (AZ91C) as modified by ion implantation, Sanay Akavipat
Corrosion of Galvanized Fasteners: Appendix, Steel Framing Alliance
Corrosion of galvanized fasteners used in cold-formed steel framing, American Iron and Steel Institute
Corrosion of magnesia-graphite-metal refractories by beginning basic oxygen furnace slag, Stephen Wayne Herrington
Corrosion of partially stabilized zirconia by steelmaking slags, Yau-Don Chung
Corrosion products of titanium in fused salt baths, Kai-Chai Chiou
Corrosion rates and electrokinetics of cobalt and cobalt-rich cobalt-iron alloys in sulfuric and hydrochloric acids, Cheng Tzong Horng
Corrosion resistance of enamel-coated steel reinforcement for concrete, Charles Robert Werner
Corrosion resistance of zinc-tin alloy films made by plasma deposition / by Farhad Akhavan., Farhad Akhavan
Corrosion testing of zinc plated steel, Wuu-Yung Lin
Cost allocation using intelligent agents for new transmission investment under electricity deregulation, Jakapun Mepokee
Cost and reliability of a coal handling controller., Stephen Michael Diebold
Cost-driven optimization of repair strategies for tolerating defective crosspoints in NanoFabric, Shanrui Zhang
Cost estimate uncertainty, George John Shannon
Cost management for building design and engineering in Japan, Kazuyuki Shimamura
Cost of brick pavement constructed, William McElroy
Cost of engineering on highway projects, Walter John Shaffer
Coupled geomechanical reservoir simulation, Amin Amirlatifi
Coupled transport of heat and mass in laminar tube flow, Lung-mau Huang
Coupling of surface electromagnetic waves to dielectric rod structures using helical antennas., Giovanni Carlo Clerici
Covariance of engineering management characteristics with engineering employee performance, Andrew Arthur Hesketh
Cover Page, Contents and Preface -- Volume I, Wei-wen Yu and Joseph H. Senne
Crack formation in investment casting ceramic shells, W. A. Everhart
Cracking Studies at Sand H Basin by the Finite Element Method, Trevor Smith and Clifton E. Deal
Crash causal factors: Crash frequency, crash severity and crash collision models, Bhanu Sireesha Javvadi
Creating a sustainable transportation workforce: Identifying skills, abilities and knowledge for future transportation workforce, Sandhya Gopalakrishnan
Creating new superconducting & semiconducting nanomaterials and investingating the effect of reduced dimensionality on their properties, Sukhada Mishra
Creation and exploratory evaluation of strategic assessment for small manufacturing companies, Merwan Burjor Mehta
Creation of XML view and propagation of updates to relational database, Janarthanan Eindhal
Creep and stiffness of full column resin grouted roof bolts., Wesley Clare Patrick
Creep behavior and physical characterization of fusion-cast alumina refractories, James G. Hemrick
Creep characteristics of thin prestressed concrete slabs, Wayne F. Alch
Creep deformation and mechanical properties of sintered glass and polycrystalline matrix composites, Rollie E. Dutton
Creep of prestrained aluminum single crystals at 373⁰ K, Chien-Yu Chen
Cretaceous/Paleogene boundary biostratigraphy and palynofacies of the Alo-1 well, Southeastern Nigeria, Janet Diane Raymer
Crictical Shear Loading of Curved Panels of Corrugated Sheets with Restrained Edges, George Abdel-Sayed
Crimp method of closure of small pressure vessels, Zafiri Bersu
Criteria for Connection Spacing in Cold-formed Steel, Muzaffer Yener
Criteria for planning a mobile home park development in rural areas, Richard Euguene Sharp
Critical characteristic capture model reduction, Michael Kent Sharp
Critical infrastructure protection and the Domain Name Service (DNS) system, Mark Edward Snyder
Cross-aisle Stiffness Tests on Rack Upright Frames, S. R. Sajja, R. G. Beale, and M. H. R. Godley
Crosshole seismic tomography and borehole logging for engineering site characterization in Sikeston, Missouri, Tiziana Angioni
Cross-layer design for network performance optimization in wireless networks, Xuan Gong
Cross-layer design through joint routing and link allocation in wireless sensor networks, Xuan Gong
Cross-layer schemes for performance optimization in wireless networks, Quanmin Ye
Cross sections for photoionization of the 6²P-fine structure levels of cesium, John Daniel Jones
Crushing machines, Samuel J. Gormly
Crustal structure and evolution beneath the Colorado Plateau and the southern basin and range province, Lamuail Bashir
Crystallization and fluorescence studies of lithium-disilicate glass-ceramics for dental restorations, Sandhya Jayaraman Rukmani
Crystallization of fluorophosphate glasses, Abdullah Ozturk
Crystallization of magmas, Norman L. Ohnsorg
Crystallographic studies of aluminum-substituted yttrium chromite., Francisco Javier Gonzalez
Crystallographic studies of some materials with a perovskite structure using the X-ray Rietveld method, Jen-Kuan Yau
C-THERMOS : an integral neutron transport code with a cold neutron scattering kernel option, Yonkai Liao
Cubic spline surface interpolation with application to the analysis of S-band antenna patterns., Gary Buck Green
Culture studies on the conversion of corn stover methane, Gary Lynn Foutch
Cupola practice in modern gray iron foundry, George E. Mellow
Cure characterization and process modeling of soy-based composites, Guanghui Liang
Curing chemistry of epoxidized soybean oil and its application for sturctural composite materials, Peng Peng Lu
Current characteristics of electrically sprayed glycerine, Larry Eugene Stoddard
Current design practice for bridge superstructures connected to flexible superstructures, Jack H. Emanuel, J. Leroy Hulsey, John Best, Joseph H. Senne, and LeRoy E. Thompson
Current measurement in power electronic and motor drive applications - a comprehensive study, Asha Patel
Current Mechanical Fastener Specifications and Test Procedure, John Fraczek
Current Research on Cold-formed Steel Structures, Asadul H. Chowdhury
Current Research on Cold-formed Steel Structures, George E. Blandford and Asadul H. Chowdhury
Curtis Laws Wilson Library, Missouri University of Science and Technology
Cyanide practice, John A. Rogers
Cyanide tests to show action of common cyanicides, Charles L. Lintecum
Cyaniding the Buckhorn clay, Paul Richardson Cook
Cyclic Load-Induced Settlement of Foundations on Clay, Braja M. Das and Eun Chul Shin
Cyclic loading of full-size steel connections, E. P. Popov and R. M. Stephen
Cyclic sedimentation of the Upper Fayetteville Formation, Faramarz Frouzan
Cyclic voltammetry applied to manganese electrowinning solutions., Satish D. Bhakta
Cyclodextrin chiral selectors for enantioseparations in high performance liquid chromatography and capillary electrophoresis, Lisa Wang Chang
Cyclodextrin stationary phases for the chromatographic separation of gases, William Taylor Wall
Cylinder-head surface temperature and maximum pressure in a diesel engine, Jayant M. Patel
Damage detection in composite structures using multi-sensing, actuation, and neural network systems, Yuping Jiang
Damage detection in mechanical and civil structures using wavelet transforms and ultrasonic imaging techniques, Amitabha Dutta
Damage detection in structural systems using 3-D wavelet transforms, Vamsi Krishna Pegatraju
Damage detection of bridge-like structures using state space models, Javier Valentin Sivico
Damage identification in different structures: A comparative study, Bhanumathi Tenneti
Damage to Masonry Structures in the Historic Center of Arezzo (Tuscany, Italy) Following the Excavation of a Sewer Tunnel, A. Ghinelli and G. Vannucchi
Damaging Settlements of a Building Due to Gypsum Dissolution, Minh Phong Luong
Damping capacity of a model steel structure, Dixon Rea, R. W. Clough, and Jack G. Bouwkamp
Damping controllers for power system oscillations using a Static Var Compensator, Sandhya R. Jetti
Dams and damming, Jay C. Cullings
Dapped-end strengthening of precast prestressed concrete double tee beams with FRP composites, Pei-Chang Huang
Data acquisition and analysis system for computer modal analysis of automotive exhaust emissions., Edward Leroy Mabie Jr.
Data acquisition using an IBM PC AT, Sumant M. Hattikudur
Data aggregation in wireless sensor networks, Priya Kasirajan
Data analysis for the soft x-ray imaging system, Houken Tseng
Database analysis of slope stability for surface coal mine highwall planning, Russell Kenneth Hively
Data classification and forecasting using the Mahalanobis-Taguchi method, Adebolaji A. Jobi-Taiwo
Data compression design considerations for airborne test vehicles, Kenneth Carlyle Pittman
Data flow architecture : its analysis and future, Mark Bradley Lynch
Data for standard curve chord steel roof trusses., William Hewitt Bush
Data fusion and evidence accumulation for landmine detection, Karthik Ramaswamy
Data fusion by using machine learning and computational intelligence techniques for medical image analysis and classification, Beibei Cheng
Data fusion techniques for health monitoring of aging aircraft and skin cancer detection, Kapil Gupta
Data mining for prediction of condition and performance of mine machinery, Ibrahim Kaan Ataman
Data mining of substation relay data, Mythili Chaganti
Data mining through neuro-fuzzy-genetic architecture, Korakot Hemsathapat
Data modeling control engineering data, Vernon Arthur Smith
Data on edible vegetable oil processes, John Charavelle Ingram
DAWGS : a distributed compute server utilizing idle workstations, Richard Henry Clark
D-crackability: a finite element measure, George David Blanpied
Deadlock detection and dihomotopic reduction via progress shell decomposition, David Andrew Cape
Dead time and count loss determination for radiation detection systems in high count rate applications, Amol Patil
Decarboxylation of malonic acid in aqueous solutions, Ramesh Natwarlal Gujarathi
Decay of certain mercury lines in argon, thallium, and pure mercury atmospheres, Edward Earl Stepp
Decentralized adaptive neural network control of interconnected nonlinear dynamical systems with application to power system, Shahab Mehraeen
Decentralized control and placement of multiple unified power flow controllers, Jianjun Guo
Decentralized schemes for clustering and routing in ad-hoc networks using neural networks, Vivek Yadav
Decimal-base binary logic (DBBL) adders and registers, James Oliver Bondi
Decision-based design under uncertainty with intervals, Sashank Vasireddy
Decision level and feature level sensor fusion for hand held mine detection, Venkat Sai Chander
Decision Support System for project managers, David Dewey Prigel
Deck-reinforced slab systems, Max L. Porter and C. E. Ekberg Jr.
Decoding of the (7, 4) Hamming code beyond the half minimum distance using neural networks, Dong-Ha Shin
Decolorization of common dyes using ozone: effect of gas phase ozone concentration and pH, Steven Joseph Gorg
Decomposition of Cr(OH)₃ to form active Cr₂C₃, Timothy A. Clancy
Decoupled explosive charge effects on blasting performance, Roberto Ucar
Decreasing the permeability of clays by precipitation of aluminum salts, Wayne Vernon Schmidt
Decreasing time to market for a medical device: new methods for the product development process, Kelly Marie Davis
Deduction of a functional dependency from a set of functional dependencies, James M. Richardson
Deep Deck and Cellular Deck Diaphragm Strength and Stiffness Evaluation, American Iron and Steel Institute
Deep Seated Base Failure and Reconstruction Work, M. Fukuoka
Defect avoidance in nano crossbar architecture, Yadunandana Yellambalase
Defect chemistry of La-doped strontium titanate, Brian Keith Flandermeyer
Defect-tolerance and testing for configurable nano-crossbars, Mandar V. Joshi
Definition optimization for code translation, David Maurice DeJean
Deflections of two-way slabs, Gerald C. Godzwon
Deformation and degradation analyses of Florida base and subgrade materials subjected to repeated load tests, Norman Dean Pumphrey
Deformation and energy absorption capacity of steel structures in the inelastic range, Theodore V. Galambos
Deformation and forces in a tire influenced by a symmetric road profile, Vedula Lalita Narayana
Deformation and fracture of concrete under uniaxial impact loading, Esteban Eulogio Miranda
Deformation Behavior of Wilford Hall Hospital Mat, Lawrence D. Johnson
Deformation Modulus of Soil at the Tip of a Bored Pile, Takahide Horiuchi and Yukihiko Kani
Deformation of a system of clamped thin circular plates with liquid filled interspace., Archie Forrest Gatrost
Deformation of Slopes of Two Excavations in Soft Clays, C. W. Sheng
Deformation of superplastic metals during friction stir microforming, James N. Reck
Deformation Response of Some Earth and Rock-fill Dams, T. Ramamurthy and S. L. Jain
Deformations and bending moments for a building slab with a central opening, Wu Ping-Yung
Degradation of gaseous TCE and PCE in an activated carbon biofilter, Jongo Kim
Degradation of polystyrene solutions by capillary shear, Tyan-Faung Niu
Degradations of MOSFETs from high temperature, radiation and hot electron effects, Cheng-Fuh Jeffrey Tang
Delamination-free drilling of boron/epoxy composite plates, Siddarth Shevgoor
Delamination growth resistance of thermoplastic composites, Mostafa Katouzian
Delay-insensitive ternary logic (DITL), Ravi Sankar Parameswaran Nair
DEM3D: a system for visualizing digital elevation models, James Alan Moyers
Demand control and energy consumption of electric arc furnaces, an application study., Milton James Murry
Demonstrating Borehole Drilling Accuracy at the Navajo Dam, Stephen J. Kravits and Hunter C. Harrel
Denitrification of a synthetic waste with a submerged filter, Dominic Joseph Grana
Densification and grain growth of a refractory grade magnesia derived from magnesite, Luis Bittencourt
Densification and mechanical properties of tantalum carbide and tantalum diboride ceramics, Xiaohong Zhang
Densification and mechanical property enhancement of aluminum oxide-titanium diboride composites by pressureless sintering, Timothy Vick Lin
Densification and thermal properties of zirconium diboride based ceramics, Matthew Joseph Thompson
Densification studies of three-component refractory grog systems., Jerome Dale Patterson
Densifying a Landfill for Commercial Development, S. B. Steinberg and R. G. Lukas
Density determination of tristructural-isotropic nuclear fuel using multiple projection x-ray radiography, Frank Angelo Strantz
Dependency of machinability in gray cast iron on nitride-induced age strengthening, Jared Teague
Dephosphorylation of Iqg1 by Cdc14 temporally regulates actin ring formation, Daniel Patrick Miller
Depositional and tectonic controls on architecture of the carbonate platform of upper Paleocene Khalifah Formation, Sirte Basin, Central Libya, Salah Abdurzak Shaniba
Deposition characterization and polymer film properties of vacuum pyrolytic polymerized poly-p-xylylenes., Paul William Kramer
Deposition mechanism of plasma polymerization, Chien-Rhone Wang
Deposition of aerosol particles on hydrodynamically interacting cylinders (fibers), Wen-Hai Shyu
Deposition of gold from an organic immersion plating bath for microelectronic applications, Eric James Dahlgren
Deposition of metallic coatings from fused salt baths, Andrew Hessler Larson
Deposition of micron & submicron particulates on cylinder : contribution to the theory of filtration, Yih-Jong Liu
Deposition of titanium by gaseous reaction, Louis John Reitsma Jr.
Depreciation, Reginald Henry Brinton Butler
Depth evaluation of damage to aircraft fuselage skins using microwave and millimeter wave methods, Andrew Dale McClanahan
Depth of field, flash synchronization, and structured lighting for a three dimensional machine vision system, Steven Ray Harms
Depth profiling of PAHs treated with activated carbon using in-situ SPME, Ryan D. Stringer
Derivation of a magnetic equivalent circuit model for analysis and design of claw-pole alternator based automotive charging systems, Joshua Michael Williams
Derivation of a method to determine reactions and deflection of a continous beam on an elastic foundation, Louis Richard Fuka
Derivation of new double-input DC-DC converters using the building block methodology, Karteek Gummi
Derivation of some empirical formulae, showing relation between breaking strength and various functions which enter into cement testing, Arthur D. Terrell
Description and origin of the breccia sequences of the St. Louis Limestone (Mississippian) in Missouri, Candice Anne Hamil
Description of El Paso Consolidated Gold Mine, Edwin Thompson Perkins
Description of the surveys of portions of the south and east boundaries of the Yellowstone National Park, Albert Babbitt Bartlett
Descriptive study of the petroleum refinery at Minatitlán, Germán García Lozano
Design Aids for Stiffened Channels, James A. Cran and Joseph Williams
Design, analysis and fatigue testing of adhesively bonded thick composite patch repair of aging aircraft structures, Hari Bhogapurapu
Design, analysis and non-destructive evaluation of adhesively bonded composite patch repairs of aging aircraft structures, Navdeep Singh
Design, analysis, and optimization of composite structures for aerospace applications, Tyler Jason Keil
Design & analysis of 2 X 2 quantum resistor networks for parallel electron wave computing, Nallu Madhu Kiran
Design and analysis of an accelerator based medical isotope production facility, Jeffrey Dean Shelton
Design and analysis of an open-ended waveguide probe for material characterization, Matthew Alan Kempin
Design and analysis of a phase-locked loop suitable for synchronization of an optical receiver, Douglas Wayne Dreisewerd
Design and analysis of a Speed-Aware Routing Protocol for mobile ad hoc networks, Kirthana Akunuri
Design and analysis of a tether system for MR SAT, Satyakishore Venkata Renduchintala
Design and characterization of asynchronous delay-insensitive arithmetic components using NULL conventional logic, Satish K. Bandapati
Design and construction of a controller for mitigation of torque ripple in a brushless DC machine, Jason Neely
Design and construction of a drop generator for use in a vertical wind tunnel, Danny Ray Conner
Design and construction of a liquid nitrogen cryostat for use in a swimming pool type reactor, Bruce B. Joiner
Design and construction of an automatic antenna pattern plotter and design of a microwave absorbent material, Norval D. Wallace
Design and Construction of Anchored and Strutted Sheet Pile Walls in Soft Clay, Bengt B. Broms
Design and construction of an electronic gain-phase meter, Gabriel G. Skitek
Design and construction of an electronic pressure altimeter for an atmospheric data acquisition system, Larry Wayne Berkbigler
Design and Construction of a Railway Yard, Embankment and Foundations under Difficult Groundwater Conditions, Hari D. Sharma, S. Sengupta, and Glen Harron
Design and Construction of a Soil Bentonite Slurry Wall Around an Operating Facility Superfund Site, A. S. Burgess, G. S. Laird, and M. S. Leonard
Design and construction of a system for the investigation of random droplet motion in liquid-liquid dispersions, John Michael Kokorudz
Design and construction of a velocity control system for a low turbulence, vertical wind tunnel, Lawrence Vehslage Field
Design and Construction of Geocell Mattress as Embankment Foundation, Alistair J. T. Gilchrist
Design and construction of ponds and small reservoirs, Harry Franklin Bossert
Design and construction of the experimental mine, Robert Knox Stroup
Design and Construction of the Seattle Symphony's Benaroya Hall Above an Old Railroad Tunnel, Carole L. B. Mitchell
Design and control of a magnetically levitated (maglev) system, Nishant Chadha
Design and critical performance evaluation of horizontal axis hydrokinetic turbines, Suchi Subhra Mukherji
Design and details of construction for a 50-ton amalgamation, concentration, and cyaniding mill, Hector Julio Boza and Carlos Enrique Elmore y Guerra
Design and details of elevated steel tank, William A. Baueris
Design and development of a drag reduction experiment for particle-gas flow in the turbulent boundary layer on a flat plate, Walter Allen Lounsbery
Design and development of an interactive web-integrated flexible manufacturing cell control system, Ravi Sharda
Design and development of an interactive web-integrated programmable logic control system, Firat Kahraman
Design and development of an open modular architecture controller for CNC machining, Mark A. Crawford
Design and development of a prototype high speed digital communications board using VLSI components, Donald E. Hand
Design and development of a robot soccer system for research and education, William Michael Siever
Design and development of cantilevered flexural pivots for use in self-leveling surveying instruments, Rolland Lee Hardy
Design and development of ionic liquid dual-mode spacecraft propellants, Steven P. Berg
Design and development of manufacturing methods for manufacturing of PEM fuel cell MEA's, Nikhil Pramod Kulkarni
Design and development of microwire feeder for laser applications, Amogh J. Shenoy
Design and evaluation of a virtual reality training system for new underground rockbolters, David Nutakor
Design and experimental study of turbo equalization for multiple antenna systems, Amirhossein Rafati
Design and fabrication of an S-band satellite receiver front-end, Khaled Jamal Salah
Design and Field Monitoring of 70 Foot High Tied Anchor Retaining Wall, Nolasco P. Angeles and Ulrich W. Stoil
Design and implementation of a FPGA based systolic processor for compressed images, Balakrishnan Venkatasamy Subbulakshmi
Design and implementation of a hardened distributed network endpoint security system for improving the security of internet protocol-based networks, William Dee Atkins
Design and implementation of a joystick based robot teaching system, Arthur Thomas Morton
Design and implementation of an asynchronous NULL Convention Logic (NCL) FPGA, Indira P. Dugganapally
Design and implementation of a PC-based tester for application-specific integrated circuit designs, Chien-Chung Huang
Design and implementation of a raster-scan graphics system, Yuan-fa Yeh
Design and implementation of a single board computer based on the TMS320C30, Medardo A. Logreira Van Arken
Design and implementation of a single-board computer based on the TMS320C31, Max Yi-Chuan Lu
Design and implementation of a single board computer with small computer systems interface based on the TMS320C30, Barry Gerard Anthony Hoog
Design and implementation of a single-board hand-held computer, Ali Fuat Baykal
Design and implementation of controllers for a class of electromechanical systems, Vijayakumar Janardhan
Design and Monitoring of Earth Embankments over Permafrost, S. Dufour, A. S. Judge, and P. Lafleche
Design and operational characteristics of a retrofit solar heating system., David Joseph Wetteroff
Design and operation of a pilot plant for biodiesel production from triglycerides, Balasubramaniam Karthikeyan
Design and operation of a system for the measurement and display of a railroad train length., Paul Clement Kriegshauser
Design and optimization of abrasive slurry feed system, control circuit and jet drilling tool for mining applications,, Pradeep Nambiath
Design and performance of a gamma-ray diffractometer at 0.12A, Randall Warren Alkire
Design and Performance of Arena Dam, James R. Schneider, Roger W. Lindquist, and George K. Sammy
Design and Performance of Horizontal Drains, J. H. Kleppe and G. M. Denby
Design and preliminary testing of a rotary internal combustion engine, Frank Darrell Statkus
Design and preliminary testing of a thermomechanical rock fragmentation apparatus, Gary Earl Fenton
Design and stability analysis of compliant mechanisms, Adarsh Mavanthoor
Design and stability and robustness analyses of neural networks in control systems, Jie Shen
Design and test an operational amplifier speed transducer, Tung-Ming Huang
Design and Testing Composite Open Web Steel Joists, J. A. Cran
Design and testing of a downhole continuous wave generator, Cole L. Smith
Design and testing of oil fired smoke generator, Santosh Narasimhan
Design and testing of packages for hollow chocolate rabbits, Raul Enrique Garcia Via
Design and test of an apparatus for rate measurements of rapid gas reactions, Erich Rolaff
Design and use of a universal logic circuit, Mahendrakumar Punjalal Shah
Design and verification of clockless Advanced Encryption Standard (AES) crypto-hardware for improved side-channel attack resistance, Siva Pavan Kumar Kotipalli
Design chart for extreme value of angular acceleration ratio for planar four-bar mechanisms, Yuan-Ruey Hewang
Design Considerations and Long-Term Performance of a Building Foundation in Clay, G. E. Bauer
Design, Construction and Behavior of Bored Cast In-situ Concrete Piles in Bangkok Sub Soil, Narong Thasnanipan, Wanchai Teparaksa, Aung Win Maung, and Ganeshan Baskaran
Design, construction and characterization of a 10-liter batch pilot plant fermentor., Sylvester Ogden
Design, construction, and initial experiments with high hydrostatic pressure extrusion device, Edward Moniz Jorge
Design, Construction and Monitoring for the Excavation of Shanghai World Plaza, B. Huang, L. Mohammad, Jianming Zhu, and Xiaoping Zhu
Design, construction and operation of equipment for the study of evaporation of aqueous solutions using a simplified reactor design approach, Virendra Kumar Mathur
Design, Construction and Performance of a Deep Excavation in Soft Clay, Richard Riker and David Dailer
Design criteria for northern and western Missouri surface water supply reservoirs., Richard Lewis Elgin
Design Criteria for Steel Transmission Poles, Edwing H. Gaylord
Design, development and characterization of a novel neutron and X-ray combined computed tomography system, Vaibhav Sinha
Design Example on Composite Steel Deck Floor Slabs, Thomas J. McCabe
Design, fabrication, and application of uniformly distributed RC networks for use in electronic circuits, Michael Flynn Kavanaugh
Design, fabrication, and evaluation of gas fired oil aerosol generator, Suresh Babu Radhakrishnan
Design, fabrication and installation of vehicle engine exhaust smoke system, Saurav Paul
Design for Assemblability/Design for Manufacturability : an assessment of its need, usage level, and effectiveness, Winston F. Erevelles
Design for Manufacturability, George T. Halmos
Design for manufacturing for friction stir welding, Harish Bagaitkar
Design for serviceability: evaluation and modeling methodologies, Jiangping Wang
Design for test techniques for asynchronous NCL designs and FPGAs, Sindhu Kakarla
Design guide for cold-formed steel trusses, Steel in Residential Construction Advisory Group
Design hazard analysis, and system level testing of a university propulsion system for spacecraft application, Joseph R. Siebert
Design, implementation, and analysis of sequential and parallel algorithms as applied to DNA contig assembly, Sanjay Nayar
Designing a low-cost propulsion system for microsatellites, Jason Michael Koszola
Designing and modeling of a new continuous steelmaking process, Jörg Peter
Designing courseware from industrial grade software for use as a component in a packaging design curriculum, Michael Lee Johnston
Designing Fire Protection for Steel Trusses, Subcommittee on Fire Technology of the Committee on Construction Codes and Standards and American Iron and Steel Institute
Designing Fire Protections for Steel Columns, Subcommittee on Fire Technology and Committee on Construction Codes and Standards
Designing Fire Protecton for Steel Beams, American Iron and Steel Institute and Subcommittee on Fire Technology of the Committee on Construction Codes and Standards
Designing Geotextile Support for Submarine Power Cables, K. Y. C. Chung
Designing, managing and evaluating a social network based Information City for innovation success, Prashanth Kannan
Designing next generation flextensional transducers by stress engineering, Manoj Narayanan
Designing protection of a distribution feeder to maximize reliability, Jingyu Wang
Design of 300 ton cyanide tailings plant and operation of same, Lamar Horacio Hunt
Design of a 100 ton asbestos concentrator, Walter Gammeter
Design of a 250 ton mill, for cyanidation of a cobalt silver ore, Carlos Enrique Elmore y Guerra
Design of a 2 HP Repulsion Start Induction motor, Joseph Worley
Design of a barge-platform marine drilling rig, Ely Schwartz
Design of a cervical spectrograph, David Clinton Stanfield
Design of a chronograph using an intel 8085 microprocessor., Richard R. Fitzmaurice
Design of a Cold Formed Section Portal Frame Building System, Philip Kirk
Design of a concrete-steel highway bridge for Dry Fork Crossing, Salem Road, Phelps County, Mo., Edward V. Damotte
Design of a conditioner for smoothing wind turbine output power, Murali Bottu
Design of a current probe for measuring ball-grid-array packaged devices, Tianqi Li
Design of a digital control unit for a seismic digital tape system, Cao-van Chung
Design of a floating point data acquisition system and a development system for the NC 4016, Ish Kumar Bhargava
Design of a Forth-based i960CA single-board computer, Jose George
Design of a galvanometer to be placed within a tubular antenna for the purpose of measuring antenna current distribution, Ferdinand Henry Mullersman
Design of a high pressure fluid intensifier, James Andrew Kwiatkowski
Design of a hydrogen community for Santa Monica, Vijay Mohan
Design of a lead blast furnace, Walter Irving Phillips and Andrew Jackson Seltzer
Design of alloys and high efficiency structures, Samarth Tandon
Design of a medium pressure hydraulic coal mining machine power unit system., William Rudolph Heincker
Design of a meta-assembler for microprogramming and a survey of microprogram optimization techniques, Rahul Saxena
Design of a microprocessor based inverter for control of a brushless DC motor, Ahmed Badrul Hasan
Design of a mill for a cyanide plant, Charles A. Fach
Design of a mill for the concentration of an Arkansas zinc ore, Ralph Augustus Conrads and Matthew Vincent Quinn
Design of a mining plant, George C. Clark
Design of an 8051 compatible processor and simulator for use in undergraduate coursework, David J. Sullins
Design of an 80960JD single-board computer, Jeffrey Darren Woodall
Design of an alternating current squirrel-cage induction motor, Thomas Moffett Thompson
Design of an analog-temperature control system for an expansion cloud chamber, Andrew C. Tebelak
Design of an automated gain control for a medical diagnostic ultrasound imaging system, Alan Wesley Bryant
Design of an automatic landing system using robust control synthesis techniques, Glen Allen Weichelt
Design of an auxiliary indicator for a fighter aircraft., Jack L. Kubicek
Design of an EPROM Programmer, Wai Yin Chan
Design of an intermediate frequency amplifier and variable frequency oscillator, Robert Charles McIntyre
Design of a nonparametric detector for FM signals, James Charles Fowler
Design of a photoelectric transient torque and speed meter, Raojibhai A. Patel
Design of a precast concrete deck girder highway bridge, Robert V. Gevecker
Design of a quadrature envelope and correlating receiver, Clinton Harold Moor
Design of a radio broadcasting station, John William Hamman
Design of a real time system : a count controller based on RTX2001A microcontroller, Ting-Wen Tang
Design of a re-inforced arch over Frisco Railroad on Tenth Street, Rolla, Missouri, Don Morgan Neer
Design of a sampled-data control system using a Motorola MC6800 microprocessor as the digital controller., Bruce Steven Kessler
Design of a sector scanner for an intraoperative ultrasonic imaging system, Kok-Hiong Kee
Design of a semi-automatic transmission, Yogendra Prahladray Buch
Design of a sequential detector, Scott William Abel
Design of a shift-register based ATM switch in VHDL, Sricharan Kasetti
Design of a smart material-based damper for vibration supression, Sampath Kumar Gollapudi
Design of a square loop magnetic integrating device, Fred Leland Grismore Jr.
Design of a steam power plant to be erected in Mudanya, Turkey, Vahram Ogretmenoglu
Design of a submergible seadrome light--universal type--suitable for military use in all areas and for transportation by aircraft, Frederick Marion Mueller
Design of a subsonic wind tunnel electrical system, William A. Wundrack
Design of a three hinged arch steel bridge, Hermann Otto Schulze
Design of a torsional vibration machine, Prafulchandra Pragjibhai Desai
Design of a traverse mechanism for water jet cutting tests., Vipulkumar Babubhai Patel
Design of automotive structural components using high strength sheet steels, Wei-wen Yu, Chiravut Santaputra, and M. Brad Parks
Design of automotive structural components using high strength sheet steels effect of strain rate on material properties of sheet steels and structural strengths of cold-formed steel members, Maher Kassar and Wei-wen Yu
Design of automotive structural components using high strength sheet steels effect of strain rate on the structural strength and crushing behavior of cold-formed steel stub columns, Chi-Ling Pan and Wei-wen Yu
Design of automotive structural components using high strength sheet steels effect of strain rate on the structural strength of cold-formed steel hybrid beams, Chi-Ling Pan and Wei-wen Yu
Design of automotive structural components using high strength sheet steels influence of strain rate on the mechanical properties of sheet steels and structural performance of cold-formed steel members, Chi-Ling Pan and Wei-wen Yu
Design of automotive structural components using high strength sheet steels - mechanical properties of materials, Wei-wen Yu and M. Brad Parks
Design of automotive structural components using high strength sheet steels mechanical properties of materials, Chi-Ling Pan and Wei-wen Yu
Design of automotive structural components using high strength sheet steels mechanical properties of materials (aging effect), Shaojie Wu, Chi-Ling Pan, and Wei-wen Yu
Design of automotive structural components using high strength sheet steels preliminary study of members consisting of flat and curved elements, Wei-wen Yu and M. Brad Parks
Design of automotive structural components using high strength sheet steels - results and evaluation of stub column tests for unstiffened curved elements, Wei-wen Yu and M. Brad Parks
Design of automotive structural components using high strength sheet steels-strength of beam webs, Chiravut Santaputra and Wei-wen Yu
Design of automotive structural components using high strength sheet steels - structural behavior of beam webs subjected to web crippling and a combination of web crippling and bending, Chiravut Santaputra and Wei-wen Yu
Design of automotive structural components using high strength sheet steels structural behavior of members consisting of flat and curved elements, M. Brad Parks and Wei-wen Yu
Design of automotive structural components using high strength sheet steels structural strength of cold-formed steel beams under dynamic loads, Chi-Ling Pan and Wei-wen Yu
Design of automotive structural components using high strength sheet steels structural strength of cold-formed steel I-beams and hat sections subjected to web crippling load, Shin-Hua Lin, Ling-En Hsiao, Chi-Ling Pan, and Wei-wen Yu
Design of automotive structural components using high strength sheet steels structural strength of cold-formed steel members under dynamic loads, Chi-Ling Pan and Wei-wen Yu
Design of automotive structural components using high strength sheet steels structural strengths of cold-formed steel members under dynamic loads, Maher Kassar and Wei-wen Yu
Design of automotive structural components using high strength sheet steels the effect of strain rate on compressive mechanical properties of sheet steels, Maher Kassar and Wei-wen Yu
Design of automotive structural components using high strength sheet steels the effect of strain rate on mechanical properties of sheet steels, Maher Kassar and Wei-wen Yu
Design of automotive structural components using high strength sheet steels transformed section method for the calculation of yield moment of cold-formed steel hybrid beams, Chi-Ling Pan and Wei-wen Yu
Design of automotive structural components using high strength sheet steels: web crippling of cold-formed steel beams, Chiravut Santaputra and Wei-wen Yu
Design of a VLSI graphics display processor, Ashok Badrinarayanan Ramaswamy
Design of a wind tunnel for the Missouri School of Mines and Metallurgy, William E. Speece
Design of backpropagation neural network architectures using a decision tree classifier / by Bethanne Marie Van Horn., Bethanne Marie Van Horn
Design of Bearing Stiffeners in Cold Formed Steel C-sections, American Iron and Steel Institute
Design of blasthole initiation delay intervals and apex angle for optimum V-cut cratering., Roger Lee Keller
Design of CFS Members and Connections for Cyclic Loading, Wei-wen Yu and Roger A. LaBoube
Design of Cold-formed Hyperbolic Paraboloid Shells, Peter Gergely
Design of cold-formed stainless steel structural members proposed allowable stress design specification with commentary, Shin-Hua Lin, Wei-wen Yu, and Theodore V. Galambos
Design of Cold-formed Steel Columns, Teoman Peköz
Design of Cold-formed Steel Plain Channels, Fang Yiu
Design of cold-formed steel structural members and connections for cyclic loading (fatigue), Roger A. LaBoube and Wei-wen Yu
Design of Contaminated Dredged Fills Utilizing Geosynthetics, Ronald C. Chaney, Kenneth Demars, and Gregory N. Richardson
Design of data acquisition system for 3D scattering facility, Douglas Bryan Cage
Design of distillation solvent recovery system, Donald Empson Puyear
Design of dual wing structures, Rajesh J. Somnay
Design of experiments as a means of lean value delivery to the flight test enterprise, Aaron A. Tucker
Design of high tension outdoor substation, Joseph Worley
Design of I-shaped beams and columns with diaphragm bracing, S. J. Errera and T. V. S. R. Apparao
Design of liquid-liquid extraction system, Mehdi Rahmani Fard
Design of longwall systems, Jimmy Dale Cole
Design of materials by microstructural optimization, Ambarish J. Kulkarni
Design of mechanical assists for medium girder bridge, Roshan Shekhar Kotian
Design of modern undergraduate digital laboratory experiments, Vijitha Chekuri
Design of multivariable deadbeat controllers using reduced order models, Joaquin Alberto Zuniga
Design of non-uniform linear antenna arrays with digitized spacing and amplitude levels, Jack F. Morris
Design of piezoelectric motor systems, James R. Friend
Design of plain concrete runways and taxiways of a class 4 airport, Erkmen Erkmen
Design of R-C-C-R spatial mechanism, Kao-chien Hsei
Design of reduced-order robust controller using optimal projection method, Khanh Tu Ngo
Design of reinforced concrete water tower and tank, Harvey Oden Garst and Pearl Frederick Michael
Design of Road Cut Adjacent to Existing Structure, G. C. Whited and C. N. Laughter
Design of robust controllers using reduced order models, Mounir Belghith
Design of valve regulated lead acid battery subsystems for battery energy storage systems for utility applications, Scott Douglas Deffenderfer
Design of Vierendeel Trusses, Richard Denis Pearson
Design optimization of nonlinear snap-fit integral parts by FEA and statistical analysis, Lavanya Nag Goteti
Design procedure for a hybrid passive energy residence., Thomas Elmer Mull
Design Provisions for Cold-formed Steel Column and Beam Columns, Committee on Specifications for the Design of Cold-Formed Steel Structural Members
Design recommendations for diaphragm-braced beams, columns and wall-studs, T. V. S. R. Apparao, George Winter, and S. J. Errera
Design Recommendations for Steel Deck Floor Slabs, Max L. Porter and C. E. Ekberg Jr.
Design, simulation, and construction of an X-band oscillator using microstrip techniques, Morgan Keith Ercanbrack
Design, simulation and fabrication of a microwave power amplifier, David Kevin Lovelace
Design, specifications and cost estimate of two hundred ton stamp mill and cyanide plant for treatment of gold ore, John Payne Sebree and William Peter Hatch
Design study of a three span continuous tied-arch bridge, George Perry Steen
Design tools for NULL Convention Logic circuits, Sasikanth Duggini
Design vs. Test Results for Steel Deck Floor Slabs, Max L. Porter and C. E. Ekberg Jr.
Desorption of phosphorus from Si (111) surfaces, Cesar Michel Magnin
Destructive testing of a highway bridge strengthened with FRP systems, T. (Tarek) Alkhrdaji
Detecting and locating electronic devices using their unintended electromagnetic emissions, Colin Stagner
Detection algorithms for spatial data, Spandan Tiwari
Detection and estimation of image blur, Harish Narayanan Ramakrishnan
Detection and evaluation of disbonds between CFRP laminates and concrete members, Stephen Thangaraj Vivian Richards
Detection and recognition of geometric shapes in a two-dimensional image, Darroll Steven McCormack
Detection and size evaluation of corrosion precursor pitting using near-field microwave and millimeter wave nondestructive testing methods, Mohammad Tayeb Ahmad Ghasr
Detection, characterization and modeling of stress-induced cracks in cement-based materials using open-ended rectangular waveguides, Jagadish Nadakuduti
Detection of annular granular melanoma in situ, Nishant Nepal
Detection of anti-personnel landmines based on waterjet induced thermal images, Srinivasa R. Somu
Detection of brown globlues, radial streaming and blue veil in dermatoscopy images, Omar Faruk
Detection of buried basement highs by airphoto drainage pattern analysis, Reynolds and Wayne counties, Missouri, Papken Aram Zarzavatjian
Detection of delay time and filtering using sequency domain technique, Earl F. Richards
Detection of discontinuities in friction stir welded components., Harsha Jyoti Phukan
Detection of explosive threats by using embedded wireless sensor based networks, Jake Daniel Hertenstein
Detection of flash in dermoscopy skin lesion images, Radhika Nagane
Detection of impurities in zinc sulfate electrolytes by cyclic voltammetry techniques., Bruce Alan Lamping
Detection of low cost radio frequency receivers based on their unintended electromagnetic emissions and an active stimulation, Sarah A. Seguin
Detection of low energy positive ions by scintillation methods, Graydon J. Hanson
Detection of multiple sclerosis using neural network ensembles, Gregory Charles Eastman
Detection of rust formed under paint films, James Larry Inglis
Detection of skin cancer using electric impedance, an electrical model of skin, and statistical methods, Kapil Gupta
Detection of skin cancer with electrical impedance: A study of indices and a finite element model, Shivappa Manjunath
Detection of smart landmines through EMI signatures and FDTD modeling, Lan Zhang
Detection of solid pigment and pigment network in dermoscopy images using texture analysis, Murali Anantha
Detection of stress corrosion cracking in u-bend brass specimens by an electro-mechanical method, Floyd Elwin Loftin
Detecton of pseudopods in melanoma, Rajesh Singh Thakur
Determination of alkalies in Portland cement by the dropping mercury electrode method, William Joseph Smothers
Determination of angle of propagation of acoustic radiation in the far field from turbofan inlet using ray acoustics, Konanur Vishweshwara
Determination of chain transfer constants and initiator efficiency in free radical polymerization using kinetic and chain length measurements, Steven Earl Russell
Determination of characteristics of the University of Missouri-Rolla reactor highly-enriched uranium fuel using the ORIGEN2 computer code, Jeffery Joel Smith
Determination of concentration profiles in multistage extraction, Ertan Yuzak
Determination of critical point of concentrating tables on Arizona copper ore, J. C. Finagin Jr. and W. C. Hogoboom
Determination of critical point of concentrating tables on Flat River ore, J. C. Finagin Jr. and W. C. Hogoboom
Determination of distillation efficiencies for the water-methanol-acetone system, Chorng Shyong Wang
Determination of fixed carbon requirement in the production of high carbon ferromanganese in a submerged arc furnace, Ryan Jeffrey DeLapp
Determination of ineffective flow areas in standard step open channel flow models upstream of a bridge crossing a wide floodplain, Dirk Lynn Gowin
Determination of infrared optical constants for single component hydrocarbon fuels, Michael Robert Anderson
Determination of lattice constants, and thermal expansion coefficients of Ti₂O₃ and of its solid solutions with Ti, Tatsuhiko Ejima
Determination of linear attenuation coefficients of chemically bonded phosphate ceramics, Jason Joseph Pleitt
Determination of machining parameters in sculptured surface machining using dynamics models and computer graphics simulations, Carl William DeBrock
Determination of mass transfer characteristics in the electrolysis of copper, Diogenes Alberto Uceda-Herrera
Determination of minor and trace elements concentration in kidney stones using elemental analysis techniques, Anjali Srivastava
Determination of moderator temperature coefficient in a pressurized water reactor using neutron and temperature noise analysis, Clinton Eugene Gross
Determination of molecular diffusivities in liquids, Pai-Chuan Wu
Determination of oxygen chemical diffusion coefficients in single crystal strontium titanate by capacitance manometry, Douglas Bugh Schwarz
Determination of physical properties of biogenic oil esters, Venkateswara Rao Koneni
Determination of pigment asymmetry in clinical images of skin tumors, Harikrishna Subramanian
Determination of progressive corrosion of clay flux blocks, Ved Prakash Maheshwary
Determination of reservoir characteristics from capillary pressure curves and electrical properties of rocks, Prasanta Kumar Guharoy
Determination of rotating machinery vibration alarm limits, Robert John Schweppe
Determination of the biodegradability of surfactants and software development, James David Lilly
Determination of the dynamic elastic constants for transversely isotropic rocks using the ultrasonic pulse method, Justo Edgar Neda Leal
Determination of the effect of air-entraining agents on certain physical properties of concrete at early ages, James Arthur Spilman
Determination of the fast flux of U.M.R. reactor., Vibhakar Ratilal Dave
Determination of the free radical production rate by ultrasonic irradiation in select organic liquids, Karla Jean Bier
Determination of the hydraulicity of local lime-stone, Claude D. Grove
Determination of thermal contact resistance between metals using a pulse technique, William Edward Stewart Jr.
Determination of the shapes of fixed and moving polodes of class II four bar mechanisms., Manharkumar Kantilal Sheth
Determination of the solubilities of lithium, sodium, and potassium sulphates in absolute methyl and ethyl alcohols, Jennie Lynn Lenox
Determination of the standard free energy of formation of Zr₃S₂., Peter E. Otten
Determination of the sub-coal strata strength using ultrasonic testing., Steven Mark Tillman
Determination of the temperature distribution of the ionized portion of the jet from a vortex stabilized plasma generator operating on argon, G. Douglas Schellman
Determination of the tensile and shear strengths of screws and the effect of screw patterns on cold formed steel connections, Marc Allen Sokol
Determination of the tensile and shear strengths of screws and the effect of screw patterns on cold-formed steel connections, Marc Allen Sokol, Roger A. LaBoube, and Wei-wen Yu
Determination of the thermal conductivity of sodium chloride at elevated temperatures, Harold Robert Weisbrod
Determination of transient temperature stresses in plates., Teh Yu Hu
Determination of vapor-liquid equilibria from total pressure measurements, Jose Antonio Casas Martinez-Ortiz
Determination of vapor-liquid equilibrium data by continuous distillation, David William Bunch
Determination of vapor pressure and oxidative stability of biogenic esters, Nagesh Mula
Determination of void swelling in a PWR baffle bolt due to fast neutron exposure, Tyson Derrik Bourbina
Determining and mitigating the effects of firing a linear shaped charge under water, Brian Burch
Determining an index of border irregularity for skin tumor images: a comparison of two algorithms, Michael David Rhew
Determining design freedom of linear feedback control systems, Harley D. Brixey
Determining inter-processor communication for parallel array operations within for-loops on a distributed memory system, Gordon Bruce Buswell
Determining of stress in V-Belts under dynamic loading., Denny Wayne Mertz
Determining opposing through volume at which permissive phase of protected permitted phasing will be unused, Jimmy Rathod
Determining parameters for a continuous simulation model by estimation, synthetic calibration and analytic calibration, David Brian Thompson
Determining stability of nonlinear control systems via Lyapunov's method., John Joseph Komo
Determining the applicability of a stator ground fault protection scheme based on third harmonic current detection., Randall Leroy Schlake
Determining the best computational method for simulation, Neil Hertenstein
Determining the modified derivative in pressure analysis, Scott Michael Frailey
Determining the optimal placement of FACTS devices using genetic algorithms and enumeration techniques, Jyothirmai Chittyreddy
Determining the R values for 12 inch deep Z-purlins and girts with through-fastened panels under suction loading, Kaye Dee Wibbenmeyer
Determining the transfer matrices of tapered multiwire transmission lines, Clyde A. Vandivort
Deuterium isotope effects on the solvolysis rates of cyclopentyl brosylates and tosylates, Jimmie D. Christen
Deuterium NMR studies of the segmental and methyl dynamics of polymethylphenylsilane and polyalphamethylstyrene, Robert D. O'Connor
Developing a compliance plan for a coal fired utility under "The 1990 Clean Air Act", Judith Andrea Almasque
Developing a model for evaluating software tools in education, Vedant Jain
Developing a performance measure for selection of dispatching rules to gain time-based advantage in a dynamic job shop: a simulation study, Gül Erdem Okudan
Developing computer integrated manufacturing in a furniture manufacturing company, William Lester Jones
Developing the technique for penetrating and inspecting destroyed buildings, Samir P. Dorle
Development and analysis of a STATCOM model for facts studies, Pranesh Rao
Development and analysis of derivative trading systems using artificial intelligence, Sunisa Amornwattana
Development and analysis of intelligent computation based stock forecasting and trading systems, Suraphan Thawornwong
Development and application of cartesian tensor mathematics for kinematic analysis of spatial mechanisms, Robert Myrl Crane
Development and applications of a hybrid finite element method (FEM)/method of moments (MoM) tool, Hao Wang
Development and applications of the cavity model and FDTD for power integrity and EMI problems, Chen Wang
Development and assessment of transparent soil and particle image velocimetry in dynamic soil-structure interaction, Honghua Zhao
Development and base line testing of local pressure drop in rectangular ducts with discrete roughness elements, Tessa C. Russell
Development and characterization of cerium oxide coatings deposited by spontaneous processes on metallic substrates, Joe Edington
Development and characterization of soy-based epoxy resins and pultruded FRP composites, Jiang Zhu
Development and characterization of soy-based materials: plastics, coatings, and foams, Rupali Yadav
Development and characterization of tungsten carbide based composites, Jeremy Lee Watts
Development and Design Analysis of a New Purlin System, J. Rhodes and J. Zaras
Development and evaluation of an effective process for the recovery of oil and detoxification of meal from jatropha curcas, Sarthak Gaur
Development and evaluation of an instrumentation system for high acceleration centrifuge testing of an artificial rock material, Padmakar Srivastava
Development and evaluation of a resonant column/high-amplitude torsional simple shear apparatus, Kevin Gerard Sutterer
Development and evaluation of epoxidized soybean oil-based polymers, Nuanpen Juangvanich
Development and evaluation of P/M processing techniques to improve and control the mechanical properties of metal injection molded parts, James Alan Sago
Development and implementation of adaptive critic based optimal neuro-controller on a cantilevered plate, Abhishek Gupta
Development and implementation of an actively controlled three-story building with piezoelectric actuators in bending-mode, Matthew Clinton Gebhardt
Development and modeling of antiferroelectric ceramics for energy storage applications, Chunhong Zhou
Development and operation of the Universal Coal Mine, Clinton, Indiana, Horace Herbert Clark
Development and simulation of a feedforward dynamic matrix control system, Chih-Liang Wang
Development and simulation of artificial neural networks using VHSIC hardware description language (VHDL), Daniel Robert Dorrance
Development and testing of a driving simulator with a multi-wall virtual environment, Krishna Reddy Nandanoor
Development and testing of chemically-based self-consolidating concrete, Mark Daniel Ezzell
Development and use of computer aided tools to enhance team dynamics with role play simulations, Vachaspathy Kuntamukkala
Development and validation of a microcontroller emissions model, Shaohua Li
Development, application and operating results of the center peripheral discharge rod mill, David Porter Hale
Development length of straight GFRP and CFRP bars embedded in normal weight concrete, Nathan Newman
Development, modeling, and simulation of a nano aerial vehicle using empirical data, Wyatt Emery Davenport
Development, modification, and comparison of execution times of algorithms which create or modify shortest path matrices for road networks, Juanita Kaye Shukers Grau
Development of a cemented sand model for centrifuge testing of blast effects on underground openings, Eric Howard Lidholm
Development of a computer-based power system simulator for the study of economic dispatch and operator training., James Rue-chang Liao
Development of a computer based simulator for the training of electric utility operators., Randall Earle Staponski
Development of a computer code implementing a direct boundary element method for plate bending problems, Keh-Chang Yeh
Development of a computer graphical well test analysis package, Mark Alan Layne
Development of a coupled areal to cross-sectional model for the simulation of stratified reservoirs, Andrew Dorsey Simon
Development of a customer satisfaction model for the single customer-supplier relationship, John F. Bade
Development of a design heat loss procedure for radiant heating systems for thermal comfort, Sarma A. V. Suryanarayana
Development of a design procedure for forged bevel gears with a web, Ebraheem Mohammed Shareedah
Development of a digital image processing course and laboratory, Anne Marie Guard
Development of a dynamic flood routing model for small meandering rivers, Roger Haden Smith
Development of a fast response flame ionization detector to measure hydrocarbon emissions, Rajesh Krishnamurthy
Development of a flexible automated assembly cell in a multitasking environment, Rashmi Roy
Development of a fluor-mica dielectric using glass-ceramic fabrication methods., James Joseph Tuzzeo
Development of a FORTH-based menu-driven operating system for an interactive surgical ultrasound diagnostic tool, William David Richard
Development of a four channel cloud nucleus spectrometer., Larry Allan Brunner
Development of a fuel cell plug-in hybrid electric vehicle and vehicle simulator for energy management assessment, Andrew Meintz
Development of a gate level logic and deductive fault simulator, A. Subramanian
Development of a general methodology for conversion between input languages of CAD/CAM systems, Shen-Wei Shiao
Development of a geostatistical analysis program for sulphide deposits of southeastern Missouri, Neal Borden Nagel
Development of a GIS-based seismic hazard screening tool, Andrew J. Wilding
Development of a graphical user interface for the study of parallel-connected solar arrays, Nisha Nagarajan
Development of a high-resolution target movement monitoring system for convergence monitoring in mines, Tristan H. Jones
Development of a hybrid 3D numerical modeling technique for analyzing printed circuit models with attached wires, Mohammad Wares Ali
Development of a laser diffraction technique for particle size measurement, Fei Lou
Development of a liquid injection propane system for spark-ignited engines via fuel temperature control, Brian Charles Applegate
Development of a low cost automated mapping/facilities record keeping system for small towns, Britta Harder
Development of a low temperature sealing phosphate glass, Yiyong He
Development of a method of forecasting electric utility coal consumption during the early operating period of a new base load power plant, John Nicholas Stolwyk
Development of a methodology for pseudo-rigid-body models of compliant segments with inserts, and experimental validation, Raghvendra Sharadchandra Kuber
Development of a microcomputer-based muscle tonometer, Philip Gregory Geerling
Development of a model for hot electron rings in fusion plasmas based on MHD concepts, Robert Frank Steimle
Development of a motif-based user interface and the simulation of parallel multi-terminal maze routing algorithms, Ramkumar Swaminathan
Development of a multi-wall virtual environment and implementation of vehicle model for a driving simulator, Sumanth Raghavendra
Development of an application programming interface to step databases for chemical process software, Yashodhan Keshav Gidh
Development of an artificial substitute for firestone, Joseph Edwin Stevens
Development of an assessment tool for engineering management undergraduate education : a questionnaire approach, Saikat Nandi
Development of an automated manufacturability evaluation system based on spatial reasoning of features, Adil Burcin Poyraz
Development of an elastic-plastic finite element program with the initial strain approach, Vernon Dale Allen
Development of an electronic governor system for a small spark ignition engine, Donald Ray Hibler
Development of an equation oriented flowsheeting system, Mark Charles Whelan
Development of a neural network for estimating in-cylinder pressure, Vishnu Thayalan
Development of an expert system to convert knowledge-based geological engineering systems into Fortran, Jill J. Cress
Development of an image processing system for augmented reality, Ashish Aggarwal
Development of an industrial power supply for high temperature resistive heating, D. D. Burt
Development of an integrated hyper-harmonic software-based noise filter for digital data conditioning, Rungsan Kajornsin
Development of an integrative commissioning methodology for new-building construction, William L. Gillis III
Development of an interactive man-machine interface for a dispatcher training simulator., Oon Hong Yek
Development of an ISO 9000 advisory team, Hsien-Tsung Liao
Development of an optimization model to determine sampling levels, Zlatan Hamzic
Development of a novel parallel machine tool, Matthew K. Goska
Development of an unmanned aircraft for use as an autonomously controlled platform, Derek Schmitz
Development of a one dimensional subsurface contaminant transport model with stochastic applications, Benjamin Waldon Johnson
Development of a postprocessor for a multi-axis CNC milling center, Mihir Satish Adivarekar
Development of apparatus for constant-hydraulic-gradient and constant-rate-of-strain consolidation tests, Jack F. Geerlings
Development of a purchased product ship-to-stock program at AlliedSignal Aerospace Kansas City division, Russell Kent Dahl
Development of a quadratic finite element solution of the convective-transport equation., David A. Dillard
Development of a recursive least squares algorithm for linear interpolation, Cameron Kelly Coursey
Development of a refractory insulating brick, Edwin Laughlin Dudley
Development of a relay ladder logic programming/debugging/simulation software package with graphical user interface, Kevin Martin Hubbard
Development of a repeatedly adjustable intraocular lens incorporating samarium cobalt rare earth magnets, Michael Wayne Matthews
Development of a sampling system and characterization of stormwater runoff from a small urban area, William Clark Ford
Development of a self-evaluation system for total quality management using the Baldrige criteria, Hung-Yi Wu
Development of a set of optimum synchronization codes for a unique decoder mechanization, Irv D. Siegel
Development of a shared earth model to investigate potential for carbon dioxide sequestration in the Springfield area, MO, Imowo Celestine Akpan
Development of a simple bar method thermal conductivity test, V. J. Flanigan
Development of a simple vibration model for predicting the structural dynamics of an HCCI engine, Jeffery A. Massey
Development of a six-axis laser metal forming system for rapid prototyping application, James Laeng
Development of a small local area network for distributed real-time communication, Myriam Levenson
Development of a smart structure for educational showcase, Bethany Konz
Development of a software package applying the acoustic wave finite element method to model inlet systems for internal combustion engines, Reynaldo Mayor Gonzales
Development of a spectrophotometric integration technique for flash rust staining determination and an investigation of the flash rust phenomenon in latex paints applied to steel and its control, Emerentiana Sianawati
Development of a system-referenced model of a salient pole synchronous machine, William E. Veerkamp
Development of a technique for the determination of capillary pressure curves using a constantly accelerated centrifuge., Robert Noel Hoffman
Development of a technique to study water penetration into shale using neutron radiography., Sheldon Andrew Easson Jr.
Development of a three precision position synthesis package for planar four-bar mechanisms, Pei-Lum Tso
Development of a turbulent atmospheric model for an experimental flight simulator, Marcus Scott Adkins
Development of a Unified Approach to the Design of Cold-formed Steel Members, Teoman Peköz
Development of a Unified Approach to the Design of Cold-formed Steel Members, Teoman Peköz
Development of a Unified Approach to the Design of Cold-formed Steel Members (Draft), Teoman Peköz
Development of a user friendly gate level logic simulator, Kumar Shiv
Development of automatic facial expression recognition system using Gabor wavelets and learning vector quantization networks, Narendra K. Chennamsetty
Development of a variable density closed return wind tunnel and density corrections for velocity measurements taken by vane anemometers, Shivaram Pattabiraman
Development of a versatile man-portable obscurant aerosol generator: characterization of aerosols in laboratory and field environments, Robert William Schaub
Development of a warrant-pricing model for the Thai warrant market, Popanit Poommarapan
Development of a wax-rich grout for borehole sealing, Steven Joseph Knobbe
Development of a web-based materials management system for small and medium sized companies in composites industry, Sanjay Kumar Karnam
Development of bench mark power system for FACTS/BESS simulation, Gaurav Karandikar
Development of Canadian Seismic Design Provisions for Steel Sheathed Shear Walls, Nisreen Balh
Development of computer business model and planner for primary processing in lumber production, Sudheer K. Padma
Development of conceptual automation solutions through process and functional modeling of human-centric processes and related products, Robert L. Nagel
Development of cost-effective, energy efficient steel framing: structural performance of slit-web steel wall studs, NAHB Research Center
Development of cost-effective, energy efficient steel framing: thermal performance of slit-web steel wall studs, NAHB Research Center
Development of deminer to neutralize antipersonnel landmines for humanitarian demining, Abhishek Shesharao Karadkhelkar
Development of design criteria for ferritic stainless steel cold-formed structural members and connections, Pieter van der Merwe
Development of embedded modulated scatterer technique: single- and dual-loaded scatterers, Kristen M. Donnell
Development of equipment for the application of high-pressure chemical jets to a heap leach gold ore, Edward G. Mitchell
Development of extrusion on demand for ceramic freeze-form extrusion fabrication processes, Parimal Sanjay Kulkarni
Development of focus group analysis approach for new product introduction: a case study in biopharamaceuticals, Kalayanee Poon-asawasombat
Development of glass microspheres for radiotherapeutic applications, Thomas A. Wetteroth
Development of helicopter flight path models utilizing modern control techniques, Alfred Fermelia
Development of high energy density dielectrics for pulse power applications, Brian L. Gilmore
Development of high resolution graphic display controller using a state-of-the-art video display generator., Francis I-Peng Tang
Development of hybrid composite bipolar plates for proton exchange membrane fuel cells, Nathaniel James Richie
Development of image processing software in a 16 bit microprocessor system, Ying-Che Michael Huang
Development of impervious low thermal expansion petalite bodies, Suchinda Chotipanich
Development of inservice inspection priorities for nuclear power plant components, T. V. Vo
Development of Kinectᵀᴿ applications for assembly simulation and ergonomic analysis, Chinmay Prakash Daphalapurkar
Development of large hole burn cut drift rounds, Joseph J. Yancik Jr.
Development of lower cost imaging systems for laser metal deposition process, Shyam Barua
Development of methodology for evaluating the operating characteristics of air-to-air energy recovery systems., Mark Allen Mueller
Development of methods for the mapping of outer electron charge density using modern X-ray powder diffraction techniques, Gerald B. Feldewerth
Development of methyl soyate as a two-stroke engine lubricant, Harish Subramanian
Development of multi-input gate level logic and fault simulator, S. P. R. Amaresan
Development of novel backscatter communication systems using a multi-hop framework and distributed beamforming, Vikram Reddy Surendra
Development of novel enantiomeric separation techniques and applications to real-world samples, Xiande Wang
Development of oxidation rate constants for metal-EDTA complexes, Chitra Chakravarty
Development of personal computer based driving simulator for education to prevent drunk driving, Manish Sirdeshmukh
Development of power on Little Piney River, James Duncan Fowler and Frank LeRoy Flynt
Development of radiated EMI estimation algorithms for PCB EMI expert system, Hwan-Woo Shim
Development of rating curves for concrete rebound hammer on concrete specimens from local aggregates, Rolla Smith Lush
Development of short-duration teams: relationship of transactive memory, motivational behaviors, and performance, Gail Angela Lueck
Development of teaching aids for use in an undergraduate computer engineering course in embedded systems design, Kyle Mitchell
Development of tests for measurement of adhesion of coatings, Surendra Kanhaiyalal Gadodia
Development of the conductive fault simulation method., Everett Linden Midkiff
Development of the embedded modulated scattering technique for dielectric material characterization, Dana Hughes
Development of the storm event runoff model 'STARM' using digitized contours and time-area concentrations., Michael Dale Stewart
Development of third generation advanced high strength steels, Meghan C. McGrath
Development of Ti-Si-N and Ta-Si-N as diffusion barriers, Shaoxin You
Development of virtual engineering simulation for lean education, Akalpit Kiran Gadre
Developments and Application of Lightweight Steel Components in Housing, Andrew S. Zakrzewski
Developments and Future Needs in Welding Cold-formed Steel, R. E. Albrecht
Developments in Inexpensive Lightweight Structures, Michael J. Davies
Deviations from classical kinetics in free radical polymerization at low conversions, Purnendu Rai
Device signal detection methods and time frequency analysis, Narayana Ravirala
Dewatering, Hydraulic Failure and Subsequent Analysis of a Sheeted Excavation, G. E. Bauer
Dewatering of the Construction Site for a 200-foot Diameter Clarifier Tank Founded on Sand and Gravel, Grover C. Cox III
Diagenesis and micofacies of the Pettet A limestone, West Atlanta field, Columbia County, Arkansas, Cheryl M. Seeger
Diagnosis of malignant melanoma using a neural network, Anurag Chawla
Diagnosis of Structural Damage and Movement Due to More Than One Cause, G. E. Barnes
Diametric ultrasonic wave velocities in axially loaded rock specimens., Stephen Anthony Lang
Diaphragm Braced Channel and Z-Section Beams, George Winter, Nuri Celebi, and Teoman Peköz
Diaphragm braced thin-walled open sections and design of wall studs, Amir Simaan and Teoman Peköz
Diaphragm Strength of Composite Roof System, Roger A. LaBoube and James M. Fisher
Dielectric and electrical properties of barium titanate ( BaTi0₃) composites, Feng-Cheng Jang
Dielectric and pyroelectric properties of titanium and tungsten-doped lead magnesium niobate, Daniel Raiford Wilson
Dielectric properties of suspensions and particles, Abhishek Manohar
Die steels and the heat-treatment of dies for use in die casting aluminum base alloys, Elmer Gammeter
Difference in pyrometric cone equivalent between raw and calcined clay, Charles Alfred Freeman
Differential cross sections for double excitation of helium by proton impact using ion energy-loss spectroscopy, Win Tha Htwe
Differential Settlement of Nuclear Power Plant Foundations, M. R. Lewis, J. R. Davie, and C. L. Weaver
Differential signal characterization, VNA calibration and loss extraction of transmission lines, Xiaoxiong Gu
Differential thermal analysis of nucleation and crystal growth rates in glasses, Kisa S. Ranasinghe
Diffusional drop growth in a supersaturated atmosphere, John C. Carstens
Diffusion and internal friction in sodium-rubidium silicate glasses, Gary L. McVay
Diffusion and percolation in two-phase random media, Illam Park
Diffusion coefficients of D-Glucose in aqueous Carboxymethylcellulose and Carboxypolymethylene solutions, Audrey Liu-Mei Huang
Diffusion in inhomogeneous polymer membranes, Sameer Suresh Kasargod
Diffusion in porous activated carbon, Thanissorn Watanapahu
Diffusion of industrial products: empirical estimation of the influence of opinion leadership, Lisa K. Baganoff Gaynor
Diffusion of iron and cobalt in nickel single crystals, Charles Frederick Heuer
Diffusion of vapors through stretched polymers, Yun Yang
Diffusiophoretic forces between juxtaposed atmospheric particles, Allen L. Williams
DiffXML: detecting changes in XML data, Yan Chen
Digested sludge dewatering on drying beds under controlled environmental conditions, Daniel James Harris
Digestion of waste activated sludge by anaerobic rotating biological contactors, Chi-Yuan Lee
Digital beamforming in an indoor setting using solid and hollow planar antenna element arrays, Timothy Nicholas Koehler
Digital computer design of compensation for linear control systems., Larry C. Amsler
Digital computer program for determining the excitation requirements and the Vee curves of a synchronous machine., Carlos Ruiz Alejandro Esquivel
Digital computer simulation of an optimum type II phase-locked loop with transport delay, Steven Alan Wright
Digital control and system management for a waste tire processing facility, Nikith Rai
Digital data transmission over a video signal using MPEG codec, Srinivas Penmitsa
Digital data transmission over MPEG video, Venkatesha Periyapatna
Digital fault calculations of large systems using matrix language and generalized equations, Saeed Abdel-Halim Khalifa
Digital filter design and evaluation, David Alvarado Maguiña
Digital registration of stereo images using the fast Fourier transform, Victor Francis Wilreker Jr.
Digital simulation of a Costas loop demodulator in Gaussian noise and CW interference, Ajay Mugatlal Mehta
Digital simulation of a signal conditioner/bit synchronizer, Quentin Reed Webb
Digital spectrum analyzer systems: a model and system implementation, Richard Ray Kuenzer
Digital speech synthesis for enhancement of afflicted speech, Bradford Dean Williams
Digital temperature control of a large scale cloud simulation chamber., Chanin Chaonirattisai
Dike Reconstruction Polder Oudendijk, J. A. van Herpen and J. de Pee
Dikes, John Edward Walker
Dimensional change correlations for 20% cold worked AISI 316 stainless steel for fusion applications, Robert Wayne Clark
Dinoflagellate cyst biostratigraphy and palynofacies of the late Eocene-early Ologocene in Southern Mississippi and Alabama, U.S. Gulf Coast, Carlos A. Jaramillo
Direct and Indirect Influence of Mining Related Subsidence on Structural Damages - a Case Study, H. J. Siriwardane and L. K. Moulton
Direct and inverse heat conduction in rock materials using the finite element method, Vernon Dale Allen
Direct correlation functions for liquid argon, Arthur Reetz Jr.
Direct - drive permanent magnet synchronous generator design for hydrokinetic energy extraction, Amshumaan Raghunatha Kashyap
Direct measurement of VOCs diffusivities in tree tissues: impacts on tree-based phytoremediation, Krishna Kumar Baduru
Direct reduction of zinc sulfide under vacuum, Merritt E. Langston
Direct sequence spread spectrum acquisition in additive white Gaussian noise and continuous wave tone jamming, Keith Clarence Griggs
Direct shear transfer of lightweight aggregate concretes with non-monolithic interface conditions, Dane Michael Shaw
Direct solutions to the even-parity neutron transport equation, Scott Walter Drumm
Direct space (nano)crystallography via high-resolution transmission electron microscopy, Wentao Qin
Direct Strength Design of Cold-formed Steel Members with Perforations, American Iron and Steel Institute
Discerning attributes which stimulate performance in quality improvement teams, Dwan LaMar Prude
Discharge characteristics of side weirs, Edgar Snowden
Discovery of an optimum selective mining unit for a high quality selective deposit, Piotr Szmigiel
Discovery of integrity relationships in relational databases, David James Harrier
Discrete event systems: a new control approach and integrated design and control, Pradeep Nambiath
Discrete fiber-reinforced polyurea systems for infrastructure strengthening and blast mitigation, Natalia L. Carey
Discrete-time control of wall temperature of an expansion cloud chamber., Brian David Brumback
Discrete translation estimation with random reference waveforms, George L. Bair
Discrimination of signal and noise events on seismic recordings by linear threshold estimation theory, David Nuse Peacock
Discussion and analysis of differential settlement of Missouri bridge approach embankments, Jonathan L. Robison
Discussions and Replies, E. J. Armstrong, G. W. Plant, D. H. Shields, John P. Sully, H. Taylor, R. K. Katti, Shri K. K. Moza, and Shri D. R. Katti
Discussions and Replies, Multiple Authors
Disintegration of green Missouri fire clay bodies at low temperatures, Wilbur Brooks Schofield
Disintegration of Ozark Plastic Fire clay in the drier, Elmer Francis Cirkal
Dispersed phase liquid fuel droplet characterization methods in the intake port of a fired spark ignition engine, Brian E. Holthaus
Dispersion behavior of aluminum oxide, lanthanum manganite and lanthanum chromite powders in liquids, Feng-Cheng Jang
Displacement-based analysis and design of rigid retaining walls during earthquakes, Yingwei Wu
Displacement based design of rigid retaining walls subjected to dynamic loads considering soil nonlinearity, E. Arni Rafnsson
Displacement based seismic design charts for rigid retaining wall, Yingwei Wu
Displacement of heavy oil by carbon dioxide in a tube, Mohammed Almabrouk Ali Ahmad
Displacements in earth embankments, Shamshad Hussain
Displacements in earth slopes under dynamic loading, Shamshad Hussain
Disposal of cattle feedlot wastes by anaerobic digestion, Eric Bayard Rapp
Disposal of lead and zinc cationic wastes on soils., Stephen Melvin Linnemann
Disposal of Phenolic Waters From a Producer Gas Plant, Dorairaja Raghu and Hsin-Neng Hsieh
Dissociation and relative stability of sodium fluotitanate, Walter L. Gage
Dissolution behavior of alkali borate glasses, Jessica D. Lowry
Dissolution kinetics of chromium depleted stainless steel alloys, David Mark Price
Dissolution of multi-component systems, Robin Ashley Murphy
Dissolution rates of zone refined iron and steel in hydrochloric and sulfuric acids and in sodium chloride solutions., Gary E. Welch
Distance function applications of object comparison in artificial vision systems, Christina Michelle Ayres
Distillation column simulation and control, Hsian T. Chao
Distoritonal Buckling of Cold-formed Steel Columns, Benjamin W. Schafer
Distortional Buckling of Cold-formed Steel Members in Bending, Cheng Yu and Benjamin W. Schafer
Distortional Buckling of Steel Storage Rack Columns, Gregory J. Hancock
Distortional Buckling Tests of Cold-formed Channel Sections, Gregory J. Hancock and Sammy C. W. Lau
Distortion effects of television scan systems and error measures of same, Gregory E. Upchurch
Distress in a Hill and Remedial Measures, N. M. Patel
Distress to Structures on Loose Ash and Cinder Fills, Moustafa A. Gouda, I. Wayne Lippincott, and D. Raghu
Distributed and collaborative watermarking in relational data, Prakash Kumar
Distributed arithmetic implementation of controllers using field programmable gate arrays, Lingfeng Yuan
Distributed fair scheduling and optimal routing protocols for wireless ad hoc and sensor networks, Niranjan Regatte
Distributed flight control system using fiber distributed data interface (FDDI), Oliver Keith Hall
Distributed knowledge base approach for scheduling in intelligent manufacturing, Gerald E. Hoffman
Distributed-network realizations for the simulation of partial differential equations, Roy Dale Hensley
Distributed parameter RC network analysis, Robert C. Peirson
Distributed power control (DPC) based energy efficient protocols for wireless networks, Maciej Jan Zawodniok
Distributed sensor network for civil infrastructure health monitoring, Jose Humberto Mata Hernandez
Distributed spatiotemporal detection for chemical and biological threats using human immune mechanisms, Yatin Bodas
Distributional aspects of P-value and their use in multiple testing situations, Xiaojun Hu
Distribution of ambient particulates and particulate trace metals around the AMAX smelter, Pramod Maneklal Shah
Distribution of Contact Pressure and Stresses under Skirted Footings, M. L. Ohri, A. Singh, and G. R. Chowdhary
Distribution of sodium perchlorate between tributyl phosphate and water., John A. Tengler
Distribution of trace elements in host rock limestone in the Tri-State zinc-lead district, Dinesh Jashbhai Patel
Distribution of trace elements in olivines and proxenes - an experimental study, Melvin Leroy Bird
Distribution, petrology, and environment of the St. Louis-Ste. Genevieve transition zone in Missouri, Donald Howerton Fielding
Distribution system operation and planning in the presence of distributed generation technology, Gavin Wesley Jones
Distribution system protection with decentralized generation introduced into the system., Behruz Fardanesh
Diurnal solar heating and cooling of a water reservoir, Stephen Patrick Lepper
Diversity of tetracycline resistant bacterial isolates and disinfection treatment of swine lagoons, John J. Macauley
Diversity techniques for signal-strength based indoor location determination, Anil Ramachandran
DLTS measurements of defects in AlGaAs single quantum-well lasers, Gwo-Chin Su
DLTS measurements of interface states in SOS devices and thermal annealing effect after gamma and neutron irradiations, Jenn-Mou Sun
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Doctoral Dissertations, Missouri University of Science and Technology
Documentation of a short circuit program for fault and protection studies., Alejandro Gonzales
Documentation of computer programs., Diane Koehler
Dolomite neomorphism and water-rock relationships in the mineralized Bonneterre Dolomite (Cambrian), Southeast Missouri, Peter R. Laudon
Dolomitized Pahasapa Limestone (Mississippian), northeastern sector of the Black Hills, South Dakota, petrography and geological setting, Abdullatif Najjar
Domain adaptive control architecture for advanced manufacturing systems, Lakshmanan Meyyappan
Dopants and the sintering of ultrafine BaTiO₃ powder, Ratthima Manalert
Dopant transport during liquid-encapsulated semiconductor crystal growth of indium phosphide in a magnetic field, Joseph Louis Morton
Dopant transport during semiconductor crystal growth. Axial versus transverse magnetic fields, Julie Marie Hirtz
Doping in zinc selenide, Edward D. Wheeler
Dose rate determination of the highly-enriched uranium fuel at the University of Missouri-Rolla Reactor in preparation for transportation, Alice Ann Netzer
Dose rate measurements of the highly-enriched uranium fuel at the University of Missouri-Rolla reactor, Michelle Lynn Hill
Double beta-decay of selenium-82, tellurium-128 and tellurium-130, Wuu-Jyh Lin
Double diffusive convection, Mark Rode
Double reflection dips - from grating ruled semiconductors, Le-Fu Teng
Double spherical harmonics - finite element treatment of neutron transport in planar and cylindrical geometries, Hatem Khouaja
Doubly fed induction generator with integrated energy storage system for smoothening of output power, Nishant Swaraj Chouhan
Down Drag on an Instrumental Bored Pile in Soft Clay, R. K. Bhandari, M. R. Soneja, and Devendra Sharma
Downsizing strategies for large engineering companies, Ann Marie Jezek
Drag and fuel minimization and entropy-based performance analysis of hypersonic vehicles, Levi Terhune
Drag reduction in hydrocarbon soap solutions, Ian Radin
Drag reduction in Newtonian polymer solutions, Harry C. Hershey
Drag reduction on non-ionic surfactants in aqueous systems, Jen-Lin Chang
Drainage and irrigation of a thirty-six square mile tract of land in Louisiana, Ralph Charles Dodge
Drainage as a factor in the development and operation of a mine, Peter Paul Ribotto
Drainage of mines, William Melvin Weigel
Drainage Walling as Excavation Support, Bernhard Wietek
Drawing characteristics of electrogalvanized steel wires., Chi-Yuan Tsao
Dredging, Swan River, Colorado, Henry William Lohman
Drift Control with Light Gauge Steel Infill Panels, Craig J. Miller
Drift velocity measurements of various materials floating on water waves, Paul Keith Scherrer
Drilled Pier Load Test, Fort Collins, Colorado, J. B. Hummert Jr. and T. L. Cooling
Drilling and blasting round design for an underground placer deposit in permafrost, David R. Ziegler
Drilling for placer deposits of gold and platinum in the jungles of Colombia, Theodore Owen Seiberling
Drill steel investigation, Richard J. Stroup and Kurt H. de Cousser
Drill steel investigation, Joseph Herman Rohloff
Driven Pile Foundation in Coral Sand, Jeddah, Saudi Arabia, Waddah Akili
Driven pile load test data for load and resistance factor design in Missouri, Joseph Ronson Cravens
Driver-vehicle-roadway interaction model, Mark E. Jaeger
Drop growth in a supersaturated vapor, Roger Buecher
Dropwise condensation as affected by vapor diffusion and molecular sticking, Salil K. Banerjee
Dry pressing refractory insulating brick, Frank Clarence Steimke
DSMC analysis of heat transfer and drag on particles in solid rocket plumes, John Christopher Fields
DSP processor based vision processing and system integration for control of laser aided manufacturing process (LAMP), Srinivas Musti
Dual active bridge converters in solid state transformers, Hengsi Qin
Dual EFPI sensors to extend absolute measurable strain range, William F. Krekeler
Dual Outlet Detention Design Optimizer (DODDO), Joel Phillip Asunskis
Ductility Criteria and Performance of Low Ductility Steels for Cold-formed Members, A. K. Dhalla and G. Winter
DUPoly radiation shielding effectiveness, Scott Patrick Rutenkroger
Durability performance of advanced construction materials, Mahmut Ekenel
Durability performance of FRP strengthened concrete members, Sharath Sreedhar Murthy
Dust control in mining industry and some aspects of silicosis, Mathuramuthoo Subramanyam
Dykes on Clay Foundation at Bersimis 2, S. Z. Akber
Dynamic adiabatic shear band development in plane strain deformations of a viscoplastic material, De-Shin Liu
Dynamical modeling of computing systems and its applications to other systems, Heh-Ching Li
Dynamic analysis and vibration control of smart structural materials, Ming-June Tzeng
Dynamic analysis of an automotive belt drive system, Yonglin Yang
Dynamic analysis of an R.S.S.R. spatial mechanism, Chanh M. Bui
Dynamic analysis of a three dimensional flexible robot arm, Ravi Kapur
Dynamic analysis of a torsional vibration actuator, Narayandas Trikamdas Ashar
Dynamic analysis of multistory frames considering both distributed and lumped mass, Mark E. Botkin
Dynamic and Human Response Behavior of Cold-formed Steel Joint Residential Floor Systems, P. W. Linehan, R. J. Kudder, and J. F. Wiss
Dynamic ant colony optimization for globally optimizing consumer preferences, Pavitra Dhruvanarayana
Dynamic behavior of biofilms in wastewater treatment, Yow-Chyun Liu
Dynamic behavior of eccentrically stiffened plates, Charles Stuart Ferrell
Dynamic Behavior of Locally Buckled Frames, George E. Blandford, Shien T. Wang, and Neng T. Wang
Dynamic capacitance of metal-oxide-semiconductor field-effect transistors, Marion Wendell Tucker
Dynamic characteristics of granular materials under horizontal shaking, Lori A. Kindervater
Dynamic Compaction – An Unusual Application, Byongmu Song and Michel Gambin
Dynamic contact analysis of a piezoelectrically driven ultrasonic crawler-actuator, Dwight Santiago Maness
Dynamic contact lines in rotating liquids, Farhad Adib
Dynamic control and parameter estimation of a robotic manipulator, Alan Ray Lewis
Dynamic Cross Interaction Effect Piles, Surendra Kumar
Dynamic decision making under uncertainty in renewable energy portfolio management and inventory management, Jianjun Deng
Dynamic dragline modeling and boom stress analysis for efficient excavation, Nuray Demirel
Dynamic equations with piecewise continuous argument, Christian Keller
Dynamic ergonomic analysis and simulation of fastening operation, Akul Shantaram Joshi
Dynamic finite element analysis of Charpy impact tests for use in nuclear power plant life extension, Scott E. Sidener
Dynamic finite element analysis of precracked, notched and layered Charpy impact tests, Jaime H. McCoy
Dynamic finite element modeling of Charpy impact test with various geometry in 2-D and 3-D analysis using ABAQUS, Chong Wan Kwon
