Content Posted in 2014
Dynamic instability and ultimate capacity of inelastic systems parametrically excited by earthquakes, Wu-Hsiung Tseng
Dynamic model-based systems engineering using XML metadata interchange, Dustin Scott Nottage
Dynamic modeling and simulation of two cooperating structurally-flexible robotic manipulators, Lei Yang
Dynamic modeling and simulations of solid oxide fuel cells for grid-tied applications, Nagasmitha Akkinapragada
Dynamic modeling of cable shovel-formation interactions for efficient oil sands excavation, Kwame Awuah-Offei
Dynamic modeling of the attitude for the MR SAT mission, Joseph Shaw Stehly
Dynamic modeling, stability analysis, and controller design for DC distribution systems, Reza Ahmadi
Dynamic modelling and optimal control of composite robotic manipulators, Subir Roy
Dynamic modelling and optimal control of the primary and secondary drying stages of freeze drying of solutions in trays and vials, Hasan Sadikoǧlu
Dynamic networking for programmable logic controller communication, Richard Andrew Hardison
Dynamic neural network and dynamic neuro-fuzzy control model for control applications, Gang Sun
Dynamic operation of check valves within transient hydraulic systems, Charles Edward Patterson
Dynamic pile-soil-pile interaction using model tests under simulated earthquakes, Karunakar Sreerama
Dynamic Precompression Treatment - A Case History, F. J. Leon
Dynamic programming formulations of multimodal logistic networks, Ajith Kumar Karunakara
Dynamic pullout resistance of anchors buried in dry sand, Chris John Veesaert
Dynamic racking performance of curtain wall glass elements, James P. Deschenes
Dynamic reconfiguration and control of smart power systems, Pinaki Mitra
Dynamic response and damage mechanics of automotive glazing subjected to simulated head impact, Shuangmei Zhao
Dynamic Response and Static Analysis of RCC Space Frames Supporting High Speed Centrifugal Machines with Coupled Soil-Structure Interaction, Dilip K. Chakravorty, Dhiman K. Ghosh, and H. N. Batavyal
Dynamic response of a gyrocompass, Subhash Govind Kelkar
Dynamic Response of an Actual Hammer Foundation, A. S. Arya, S. Saran, and S. Bandyopadhyay
Dynamic response of a simply supported beam to an accelerating point load, Joseph Victor Cusumano
Dynamic response of circular plates to transient and harmonic transverse loads including the effect of transverse shear and rotary inertia, Perakatte Joseph George
Dynamic Response of Infilled Multistorey Steel Frames, Craig J. Miller and Abo-Elkhier Serag
Dynamic Response of Steel Industrial Storage Racks, C. K. Chen and S. A. Freeman
Dynamic Response of Thin-walled Beams, Rodney L. Dreisbach, Martin L. Moody, and James K. Iverson
Dynamics and adsorption of sodium alkylbenzenesulfonates on alumina, Kazuomi Nagashima
Dynamics and control of a flexible cylindrical manipulator, Min-Shen Lu
Dynamics and failure analysis of architectural glazing subjected to blast loading, Jun Wei
Dynamic simulation models for distributed generation classes, Natasha Ayesha Khan
Dynamic simulation of multi-body systems in motion for virtual prototyping, Balaji Kothandaraman Vilvaray
Dynamics of an axially moving flexible finite strip, Madana M. Gopal
Dynamics of a partially-filled cylinder, Don Ross Tichenor
Dynamics of disordered harmonic lattices, Daniel N. Payton III
Dynamics of electron removal from helium and molecular hydrogen by collisions with heavy particles, Luzheng Meng
Dynamics of matter-, antimatter-atom collisions, David Robert Schultz
Dynamics of polyacrylates in bulk and adsorbed to a silica surface as determined by deuterium NMR, Robert B. Funchess
Dynamics of silane coupling agents in bulk and adsorbed on silica surfaces, Hye-Jung Kang
Dynamics of systems with rotating pendulums as vibration absorbers, Teik Chin Lim
Dynamics study of block copolymers in solution and on surfaces, Ming Xie
Dynamic testing of anchors buried in dry sand., Jim Lee Hillhouse
Dynamic testing of curtain wall glass components with in-plane and out-of-plane motions, Venkatraman Shanmugam
Dynamic Testing Versus Static Load Tests: Five Case Histories, Stephen S. M. Cheng and Shaheen A. Ahman
Dynamic time warping comb filter for speech enhancement, Joseph Thomas Graf
Dynamic unsupervised clustering algorithm (DUCA) for sensor data fusion, Mereddy Pramodh Kumar Reddy
DYNUMR : dynamics of the Williams-Otto Process, Shih-Hsing Chien
Early warning system for software development, Gautam Kane
Earth Dams at Nuclear Power Plants, R. Pichumani, D. C. Gupta, and L. W. Heller
Earthquake Damages to Earth Dams and Levees in Relation to Soil Liquefaction and Weakness in Soft Clays, W. S. Wang
Earthquake Resistance of Industrial Steel Storage Racks, C. K. Chen and R. E. Scholl
Earthquake Resistance of Light-gauge Steel Frames, Testuro Ono
Earthquake Response of Locally Buckled Frames, George E. Blandford and Gordon C. Glass
Eccentric Connection of Cold-formed Steel Rack Structure, Rokuya Yamasaki, Noboru Yamamoto, and Tsunemi Mochinaga
Ecology and distribution of foraminifers of a traverse in the northwestern Gulf of Mexico, Faiz Nassir Thomas
Economical span length ratios for four span continuous girder bridges., C. C. Jogani
Economical span length ratios for three-span continuous girder bridges, Donald Hindrik Timmer
Economic analysis of energy recovery at the circulating water discharge of a coal fired power plant, Bryan K. Uhlmansiek
Economic analysis of secondary distribution networks, Charles F. Cromer
Economic dispatch and optimal sizing of battery energy storage systems in utility load-leveling operations, Chin Hwang Lo
Economic evaluation of automated mapping systems in small communities, Adel Aly Fadel
Economic evaluation of sustainable strategies for the transportation sector, Yaqin Lin
Economic fuel dispatching in power systems, Nittaya Hokierti
Economic investigation of the lignites of the Dickinson, N.D. area, Glenn Beckley Morgan
Economics and finance on time scales, Julius Severin Heim
Economic Study of the Connection Safety Factor, Niels C. Lind, Lawrence I. Knab, and W. Brent Hall
Economies of scale in the production of fuel grade ethanol., M. Waqi Ul Alam
E-design tools for friction stir welding: cost estimation tool, Pradeep Kumar Tipaji
Edge Stiffeners for Cold-formed Steel Members, Teoman Peköz,; George Winter; and T. P. Desmond
Educational robotics: using the Lego Mindstorms NXT platform for increasing high school STEM education, Matthew Aaron Strautmann
Education level and organizational tenure : predictors of quality of work life, Lisa Katherine Baganoff
Effect and interactions of commercial additives and chloride ion in copper electrowinning, Wenyuan Cui
Effective availability of systems and the spare parts requirement, Jamnarn Hokierti
Effective design widths of high strength cold-formed steel members, Lan-Cheng Pan
Effective leadership for total quality management, Paul D. Hirtz
Effective Lengths for Laterally Unbraced Compression Flanges of Continuous Beams Near Intermediate Supports, G. Haaijer, J. H. Garrett Jr., and K. H. Klippstein
Effectiveness of a computer-integrated, multi-media learning environment on engineering education, Bonnie Daily
Effectiveness of a Slurry Cutoff Wall at Loeffel Site, G. W. Lee Jr., S. K. Bhatia, G. A. Swenson III, and S. P. Clemence
Effectiveness of groupware as a knowledge delivery and collaboration system, Nabil Mohammad Alghalith
Effectiveness of piezoelectric wedge actuators in making tuned mass dampers adaptive to disturbances, Derek Joseph Smith
Effectiveness of Sand Drains in Peaty Soil in a Case of Differential Settlement Recovering, C. Mastrantuono, A. Tomiolo, and E. Arcangeli
Effective potential function models of the water-surface interaction: Ice and AgI, Jerry Kiefer
Effective strategies for management of Department of the Army research and development in advanced ceramic materials, James Russell Hann
Effective use of Contract Engineers, Michael Alan Valenti
Effect of acid treatment on cation exchange capacity of clays, Steven Charles Roberti
Effect of a hot spot on the acoustic response of a flat plate, Chinpai Jong
Effect of a large inductor in the field circuit of a salient-pole synchronous machine on transient reactances., Ali-Morteza Mirzaee
Effect of a lime-cement additive on the physical properties of a podzolic clay soil, Raymond H. Frankenberg
Effect of alkaline earth chlorides on vapor-liquid equilibria of acetic acid-water system, James F. Carnahan
Effect of an annular connection between the plasma source and flux conserver on the properties of CTX spheromaks, Charles Matthew Hart
Effect of Anchorage and Sheathing Configuration on the Cyclic Response of Long Steel-frame Shear Walls, American Iron and Steel Institute
Effect of antibiotics and chemical disinfectants on anaerobic sequencing batch reactor treatment of swine waste, Vineeth Sasidhara Panicker
Effect of arc energy and preheat on weld microstructures of 2205 duplex stainless steel / by Robert William Ryan., Robert William Ryan
Effect of arsenic on assay for gold and silver, Rosco Conkling Ham and Frederick Arnold Moore
Effect of artificial roughness on convection, Lee W. Burford
Effect of axial dispersion on interphase mass transfer in packed absorption columns, Virendra Kumar Mathur
Effect of axial mixing in gas absorption, Sundareswaran Parameswaran Iyer
Effect of bed roughness on energy dissipation in mudflow, Robert R. Holmes
Effect of biological activity on pesticide desorption, Loh-Tien Chiang
Effect of boundary layer control, through spiral cuts, on the film coefficient of convective heat transfer, Nicholas W. Barre
Effect of boundry layer control, through surface holes, on the film coefficient of convective heat transfer, Jainti Prasad
Effect of calcium lignosulfonate on properties of concrete at early ages, Lawrence Kong-Pu Wang
Effect of carbon content in steels upon the deposition of titanium from a fused salt bath, Reinhard Paul Abendroth
Effect of certain minerals on fire assay of lead, Earl McColloch Smith and Rowe Francis McCrae
Effect of chain length on the termination rate constant in free radical polymerization, Naresh Kumar Adusumilli
Effect of chemical admixtures on the permeability of a castable refractory, José María Soto Perdomo
Effect of chiral solution precursors in the epitaxial electrodeposition of metal oxides, Jonathan Edward Stewart
Effect of chromium, molybdenum, tungsten, and vanadium additions on the physical properties of 1.4 percent titanium-copper, Edward Palmer Patterson
Effect of compression and transmission on the illuminating and heating value of carburetted water-gas, Horace Herbert Clark
Effect of concrete shrinkage on stresses in reinforcing steel, C. Raymond Nowacki
Effect of deflections for a flat plate by slope-deflection-gyration method, William Hsin-Loo Ying
Effect of dense heat exchanging internals on the hydrodynamics of bubble column reactors using non-invasive measurement techniques, Mohammed Khloofh Al Mesfer
Effect of dissolved water on physical properties of silver borate glasses, E Richard Reynolds
Effect of dopants and cement content on the creep behavior of refractory concretes, Cheng-Hwa Liu
Effect of engine operating conditions on the size and morphology of diesel particulate emissions, Adam Neer
Effect of environmental parameters on the vapor phase concentration of TNT and related compounds in the terrestrial environment, Raghavendra Konduru
Effect of fiber orientation on dynamic characteristics of laminated composite plates, David Brian Popejoy
Effect of flange restraint on web crippling strength, Roger A. LaBoube, Wei-wen Yu, and Bhavnesh H. Bhakta
Effect of food processing techniques on phytosterol, tocopherol and volatile content in soybean and soybean derived foods, Naga Mallika Surapaneni
Effect of Foundation Deformations on the Damage of a Masonry Villa (Case History), S. A. Abo-El Magd, H. M. Hosny, and M. Mashhour
Effect of gamma radiation on selected organic protective coatings, James W. Johnson
Effect of glass aggregates upon abrasiveness of asphaltic mixtures, Dwarka Prasad Gupta
Effect of hydrated lime and portland cement on the physical properties of clay soil for highway base construction, Judson Leong
Effect of hydraulic coupling on powder factor reduction in secondary blasting, Mark F. C. Schmidt
Effect of hydrophobicity and surface roughness on two-phase flow in rectangular microchannels, Gautham C. Unni
Effect of hydrostatic pressure on anelastic stress relaxation in a mixed-alkali silicate glass, Young-Gil (Gilbert Y.) Kim
Effect of hydroxyethyl cellulose on properties of concrete at early ages., Vipinchandra R. Shah
Effect of inclination on film boiling, Shih-Chang Lin
Effect of initial conditions on molecular mixing in a high Schmidt-number Rayleigh-Taylor mixing layer, Lakshmi Ayyappa Raghu Mutnuri
Effect of interface debonding on various moduli of short fiber composites, Kingshook Ghosh
Effect of internal pressure on compressive buckling stress of a cylindrical shell under eccentric loading, Chao-Ping Chu
Effect of in vivo lead exposure on lymphocyte response to in vitro mitogenic stimulation, Chaandini Jayachandran
Effect of leaching on the strength properties of a hydrated lime-cement stabilized soil., Yurdakul Osman Ulugonul
Effect of lime & cement additives on the dynamic modulus of elasticity of a clay soil, Ismail Yolar
Effect of lipid composition on the physical properties of liposomes: a light scattering study, Rajiv Kumar Yandrapati
Effect of metals and nutrients on trichloroethylene degradation by soil cultures stimulated by methane, Kumar S. Kathinokkula
Effect of micelles on flotation of metal ions, Uriel Michael Oko
Effect of mix parameters on longevity of bituminous mixtures, Clayton Reichle
Effect of multi-node distribution on Ada compilation sequence turnaround time, Donald E. Bertier
Effect of nickel on castability of chromium molybdenum steel & the dynamic fracture toughness of HY-130, Abhilash Dash
Effect of nodule count and cooling rate on the matrix of nodular iron., Subrata Sen Gupta
Effect of nodule count on the mechanical properties of commercial ferritic malleable iron., Robert F. Fleischman
Effect of passivation parameters on the pitting corrosion of austenitic stainless steel, Hsien-Tsung Liao
Effect of pattern and coating properties on defect formation in aluminum lost foam castings, Devin Ray Hess
Effect of pelletization on the sintering of a lead charge, John Robert Knoepke
Effect of photoneutrons on transients of beryllium reflected reactors, Safdar Ahmad Ali
Effect of plasticizer on segmental dynamics of bulk and adsorbed poly(vinyl acetate)-d₃, Rakesh R. Nambiar
Effect of poly-ethylene glycol, a non-shrinking agent, on strength properties of concrete., Vasantrai Vallabhbhai Desai
Effect of polymers, salts and their mixtures on the formation of dental plaque, Ondrea Bermudez
Effect of pressure on crystallization in lithium disilicate glass, Tihana Fuss
Effect of prior quasistatic loading, defect shape, and defect size on the initiation and growth of dynamic adiabatic shear bands, Chandramohan Reddy Adulla
Effect of processing variables on evaporative pattern casting, Jerald Alan Smith
Effect of product family production environments on production capacity performance measures, Samarth Dilip Patwardhan
Effect of rebar contamination on the steel-concrete bond during concrete construction, Lawrence H. Taber
Effect of recycling on the produced gas from a small scale fluidized bed reactor., David Thomas Hoppe
Effect of removed web-section on critical load for I-beam columns, Henri Simon Rigo
Effect of sand particle size on fracture toughness of sand/polyester composite, Mahmood Farhadinia
Effect of saturation and plasticity on dynamic properties of silt, Chaudhry Muhammad Shahbaz
Effect of Semi-rigid Connection to Steel Column of Cold-formed Perforated Singly Semmetric Section, Paul Han Cheng
Effect of side edge distance and concrete materials on corrosion in precast prestressed concrete panels, Dayi Zhang
Effect of single stirrups on reinforced concrete beams, Vinodbhai T. Patel
Effect of Smear Due to Vertical Drains on the Behaviour of Two Embankments Constructed on Soft Clays, B. Indraratna and I. W. Redana
Effect of solvents on short peptides structure: A molecular dynamics study, Rakesh Jayanthilal Jain
Effect of stiffness ratio on stresses in a rigid frame., James Juh-Ling Tang
Effect of strain rate on material properties of sheet steels and structural strengths of cold-formed steel members, Maher Kassar
Effect of stress concentrations on fatigue of composite and metallic structures, Ross Henry Falen
Effect of structure and plasticizer on the glass transition of adsorbed polymer, Boonta Hetayothin
Effect of surface conditions on nucleate pool boiling of refrigerant-11, Abbas M. Sinnarwalla
Effect of surface roughness and putty thickness on the bond performance of FRP laminates, Xianlin Shen
Effect of surface segmental mobility on adhesion of acrylate soft films, Ravindra Vohra
Effect of surface treatment on localized corrosion of stainless steel, Chyang Jer Wu
Effect of sweeping sinusoidal excitation on nonlinear dynamic systems., MD. Mosharraf Hossain
Effect of swirl on axisymmetric sudden expansion flow, Chih-Kwei Wu
Effect of system control factors on response variables in Just in Time (JIT) and Theory of Constraints (TOC) systems, Narasimhan SrinivasaRaghavan
Effect of temperature, aging, and composition on phase development in the system Al₂O₃-P₂O₅-H₂0., John Allan Middleton
Effect of temperature on the acoustic bending response of a flat panel, Wenjeng Koai
Effect of the mixed liquor suspended solids concentration on the treatment of dairy wastes by activated sludge process, Meredith Hambleton Saxer
Effect of the size of particles of zinc ore and carbon upon the rate of reduction of zinc ore by carbon, Keith Oxley Alexander
Effect of the use of old retorts as grog and of zinc oxide upon the properties of bodies for the manufacture of retorts, Elmer Gammeter
Effect of the X² test on construction of ID3 decision trees, Mayank Thakore
Effect of third components on drag reduction in aluminum soap-hydrocarbon systems, Kun-chieh Lee
Effect of threshold in a high resolution target movement monitor in underground mines, Deepti Bairineni
Effect of time and temperature on distillation of zinc-lead-silver complex sulphide concentrates, Ernest Sterling Wheeler
Effect of titanium dioxide as a mineralizer in silica brick, Henry Clay Brassfield
Effect of toxic organic compounds on mobility of heavy metals in soils, Akbar Ghazifard
Effect of transition elements on the transmittance of B₂O₃ glasses, Chandubhai Gordhanbhai Amin
Effect of turbulence on velocity measurements taken by the electronic vane anemometer, Faisal Mohammed Asaad
Effect of unionism on cost of coal, Subrahmanya Padmanabhan
Effect of various factors on the rate of reduction of zinc ferrite, calamine, and willemite by carbon, Foster Cary Nix
Effect of viscoplastic flow rules and transverse isotropy on steady state penetration of thick targets, Aslam Adam
Effect of viscosity on the cetane number of a diesel fuel, Moris Bolay
Effect of web atmospheric cues on users' emotional responses in ecommerce, Tanvi Joginapelly
Effects of 0.5 weight percent boron on cobalt aluminide, Kevin Thomas Slattery
Effects of a century old Missouri lead mining operation upon the water quality, sediments and Biota of Flat River Creek., Roger Leon Kramer
Effects of additives in acid chloride zinc deposition, Yangsuk Park
Effects of Allowable Steel Thickness Variation, C. Keith Brasher
Effects of a newly synthesized thiol antioxidant on doxorubicin-induced oxidative stress, Rong Shi
Effects of a nickel reactor liner and other reaction variables during supercritical water reformation of glycerin, Michael S. Stever
Effects of a reverse order of firing using millisecond delay electric blasting caps in a quarry operation, Reginald John Jones
Effects of bolt threads on the stiffness of bolted joints and bolt thread and head fillet stress concentration factors, Bradley Alan Bunyard
Effects of cerium conversion coating on 7075-T6 aluminum fatigue properties, Brian Thomas Call
Effects of charged polymers in two aqueous phase separation of proteins, Moon-Sun Lin
Effects of coal comminution in relation to waterjet and selected feed properties, Yaqing Li
Effects of coal mining on ground water in Missouri., Katherine Koch Kunkel
Effects of cold-forming on light-gage steel members, Kenneth W. Karren and George Winter
Effects of cold work in cold-formed steel structural members, S. J. Britvec, Alexander Chajes, K. W. Warren, Jairo Uribe, and George Winter
Effects of Collapse Settlement of Fill on Reinforced Earth Walls, G. E. Blight
Effects of colloidal materials and polyelectrolytes on carbon adsorption in aqueous solution., Jack Taylor Garrett Jr.
Effects of combined exposure to ethanol and ionizing radiation on the antioxidant status of in vitro and in vivo models, Joshua Ogony
Effects of common inorganic species on UV-visible spectroscopy, Sridhar Ummethala
Effects of complex geometry, shell thickness and firing regimes on shell cracking in investment casting shells during rigid polymer pattern removal, Samrat Krishna Bharadwaj Komaragiri
Effects of copper on the cupellation of silver, Charles A. Baker and Miles Sedivy
Effects of corrosion and fatigue on structural integrity of 2024-T3 clad aluminum alloy riveted lap joints of aging aircrafts, Christopher Dozie Nnadili
Effects of corrosion on the strength and integrity of adhesively bonded composite patch repairs of damaged aircraft structures, Harinath Appani
Effects of CO2 on the strength of lime treated clay soil, Tuncer Karakurt
Effects of CR-plating and environment on the cracking of low alloy steels at high temperatures, Robert C. Tooke
Effects of dissolved oxygen, pH, and carbonate alkalinity on the UV/H₂O₂ oxidation of MTBE, Justin M. Sutherland
Effects of Effluents of Industrial Waste on Soil Properties (A Case Study of Nandesari Area, Vadodara), D. L. Shah and A. V. Shroff
Effects of flat and elongated particles upon properties of mixtures containing glass aggregates, John Dean Doyle
Effects of gamma radiation on ion exchange membranes., John R. C. Roop
Effects of geographic distance and dispersal barriers on amphibian polymorphism, Adam Lee Martin
Effects of Geology and Geotechnical Properties of Rocks for the Selection of Type of Dams, Baqir Hasan
Effects of higher speed explosives in drift rounds, Harve Preston Nelson
Effects of high volume fly ash and powder activators on plastic and hardened concrete properties, Drew Alexander Davis
Effects of high volumes of fly ash on cement paste, Karl Wehking Beckemeier
Effects of indentation speed and water saturation level on the behavior of Roubidoux sandstone, Azupuri Ayerikujei Kaba
Effects of internal pressure upon the buckling of thin circular cylindrical shells under axial compression, LeRoy E. Thompson
Effects of I/Q arm unbalance on Costas phase-locked loops, John Paul Oliver
Effects of lead contamination on lead-free solders, Richard S. Colfax
Effects of material variables and process parameters on properties of investment casting shells, Priyatham Tumurugoti
Effects of melt reprocessing on mechanical and thermal properties of engineering polymers, In-Mau Chen
Effects of mixing procedure upon uniformity of fibre reinforced concrete, Donald E. Nortrup
Effects of nonsymmetric release times on rate monotonic scheduling, Randall Gregory Karl
Effects of nozzle geometry parameters on powder stream structure in laser aided deposition process, Yogesh D. Thakar
Effects of oxidation on magnesia-carbon bricks, Marla Kay Johnston
Effects of oxygen availability on the performance of rotating biological contactors., Christopher Edwin McCann
Effects of precise arrays of pits on the nucleate boiling of freon 113 from flat copper surfaces at one atmosphere pressure, Anthony Dominick Messina
Effects of pressure on the mechanical properties of magnesium, Joseph George Hoeg
Effects of processing variables on weld bead morphology using surface tension transfer, Jeffrey Michael Rick
Effects of rainfall intensity on the 'STARM' model derived unit hydrograph, Jason Maze
Effects of relief well efficiency on piping and slope stability of Mississippi River levees, Kenneth Joseph Zur
Effects of sand admixtures on the physical properties of soils, Necati Kanatsiz
Effects of solids on friction factor in a sand-water mixture, Frank J. Capek
Effects of spatial positioning and surface characteristics of simulated rock-joints on presplit blasting, Syed M. Tariq
Effects of specimen size reduction on the transition curve of the Charpy V-notch impact test, Lonnie Eugene Schubert
Effects of Strain Hardening and Aging on Corner Properties of Cold-formed Steel Shapes, Kenneth W. Karren and M. M. Gohil
Effects of stress on material properties, intrinsic and extrinsic behavior, and electromechanical response of stress-biased actuators, Nisanart Navapan
Effects of substituting silicon and manganese for iron on the magnetic properties of several rare-earth transition-metal boron compounds, G. K. Marasinghe
Effects of temperature, pH and contaminant on the solubility of aluminum, Penelope Pagoni
Effects of the luminous environment on managerial decision making, Marc Clay Belcher
Effects of the rate of latent heat release on fluid flow and solidification patterns during alloy solidification, Mac Joseph Voss
Effects of typical manufacturing parameters on the flow of liquid metal and the formation of defects in gray cast iron lost foam castings, Jeremy Joseph Green
Effects of water quality on bacterial regrowth in water distribution systems, Manikantan Balakrishnan
Effects of wave action upon the design of the breakwater for Istanbul harbor, Melih Suat Durusan
Effects of zircon in the prime coat of investment casting shells, Joseph Bradley Steinkamp
Effects of zirconium compounds on a bright glaze, Stuart Dods
Effects on additions on the physical and dielectric properties of lead magnesium niobate, Daniel Joseph Beck
Effects on compressive and flexural strength by concrete production variables, Brent Andrew Whitwell
Efficacy of Grout Curtain at Ramganga Dam, M. C. Goel and B. N. Sharma
Efficiency and loss mechanism of the electro-fluid dynamic momentum transfer process applied to propulsion systems using atmospheric air as the working fluid, Roger Coy Crites
Efficiency of mill practice in the Joplin District, Ira Lee Wright
Efficiency of the Missouri School of Mines power plant, Eugene Harding Broughton and William Henry Elbelt
Efficiency of the Missouri School of Mines power plant and cost of operation, Cairy C. Conover, John Richardson Kenney, and Louie Lincoln Coover
Efficiency of various types of reinforcement in controlling opening of cracks in concrete pavements, Frederick Richard Heartz
Efficiency studies of the effect of moisture on the power consumption of mine scrapers, Georges J. Vigier
Efficient data access in mobile cloud computing, Siva Naga Venkata Chaitanya Vemulapalli
Efficient digital filter algorithms for use in Monte Carlo simulations of communication systems, Hans-Christian Perle
Efficient ethylene recovery from pyrolyzed ethane, Mark Francis Hahesy
Efficient field methods for the petroleum geologist, Phillips Brooks Dolman
Efficient finite element analysis of high speed mechanisms under inertial and impact loads, Abani Kumar Patra
Efficient finite element methods for large displacement elasto-plastic problems, Ching-Chih Fu
Efficient integrity verification of replicated data in cloud, Raghul Mukundan
Efficient management of highway projects under state administration, from the point of view of the project or resident engineer, Jean Paul Bryan
Efficient modular arithmetic units for low power cryptographic applications, Rajashekhar Reddy Modugu
Efficient parallel algorithms on reconfigurable mesh architectures, Hsi-Chieh Lee
Efficient uncertainty quantification in aerospace analysis and design, Yi Zhang
Eigenproperties of nonclassically damped dynamic systems, Daniel Patrick Malone
Eigenvalues and eigenvectors for nonclassically damped dynamic systems by a perturbation method, Jerry Dean McCormack
Elastic Modulus of Cold-formed Sheet Steel, K. R. Venkataramaiah, J. Roorda, and K. R. Srinivasaiah
Elastic-Plastic Buckling of Cold-formed Circular Rings, Subhash C. Anand and Alvin R. Griffith
Elasto-plastic finite element analysis of laminated composite plates, Fanghui Jiang
Electrical and structural properties of compositions in the systems Y₁₋ₓCaₓMnO₃ and La₁₋ₓCaₓMnO₃, Jeffry W. Stevenson
Electrical cable design and applications, Robert William Buente
Electrical characterization of thin polycrystalline films of cadmium telluride prepared by chemical spray pyrolysis, Alok K. Berry
Electrical conductivity, Seebeck coefficient, and defect structure of Ca-doped YCrO₃, George Francis Carini II
Electrical contacts to spray pyrolized p-type cadmium telluride thin films, Daniel James Bicket
Electrical degradation in high purity barium titanate, Jeffrey Duncan Keck
Electrical model for the monopole/slot antenna, Edward Allen Hall
Electrical model investigations using the horizontal profiling technique, Alan H. Kwentus
Electrical properties and cation valences in the (La,Ca)(Cr,Co)O₃ system, Scott Richard Sehlin
Electrical property and microstructure during thick film firing, Ping Sun
Electrical resistivity prospecting for tar-sand deposits-Western Missouri., Allan Cordell Harris
Electrical resistivity surveying for tar sands in western Vernon County, Missouri., Dwight David Fulton
Electric and magnetic field induction on parallel transmission lines, Robert Joseph Schnell
Electric demand reduction for industrial facilities, Lawton Christopher Komo
Electric field investigations and a model of electrical spraying of liquids, Wallace Deshon
Electric field strength dependency of the rate of radiation induced degradation in silicon planar devices, Cyrus Hoshang Irani
Electricity generation and ethanol production using iron-reducing, haloalkaliphilic bacteria, Varun Paul
Electric utility peak load shaving by load management and remote load control, Larry Lawayne Rushing
Electrochemical aspects of galvanic stripping in solvent extraction, Haiyang Gu
Electrochemical behavior of zinc and plasma-deposited zinc in sulfate electrolytes, Pei-Li Tseng
Electrochemical characterization of cerium-based conversion coatings on Al 7075-T6, Simon Joshi
Electrochemical characterization of impurities and additives in zinc electrowinning, Xuewen Tang
Electrochemical deposition and characterization of silver oxide nitrate and silver oxide thin films, Bryan E. Breyfogle
Electrochemical evaluation of anodes in lead electrowinning, Christel M. A. Bemelmans
Electrochemical evaluation of zinc electrolyte, Rajesh Kumar Singh
Electrochemical evaluation of zinc sulphate electrolyte containing cobalt, antimony and organic additive., Mark Wilson Mateer
Electrochemical injection of phosphate for soil stabilization, Tracy Jo Thomas
Electrochemical self-assembly of copper/cuprous oxide layered nanostructures, Ling-Yuang Huang
Electrochemical studies of plasma-formed tin, Yung-Ming Jack Chen
Electrocrystallization and scanning probe microscopy of ceramic thin films and superlattices, Chen-Jen Hung
Electrodeposition of antimony from sulfide melts, Mahendra N. Rana
Electrodeposition of conducting metal oxide thin films and superlattices, Richard J. Phillips
Electrodeposition of copper-lead alloys from a 7.2 per cent amine solution saturated with respect to copper and lead. Study of the production of cupric oxide to be used as solute, Edmund Simon Roszkowski
Electrodeposition of high technology coatings, Ming Fang
Electrodeposition of inorganic materials with tailored shapes and chiral morphologies, Elizabeth A. Kulp
Electrodeposition of layered nanostructures and epitaxial metal oxide thin films, Eric W. Bohannan
Electrodeposition of metallic gas diffusion layers for use in PEM fuel cells, Gargi Tandra
Electrodeposition of ordered semiconductor metal oxide nanostructures and epitaxial thin films, Run Liu
Electrode potential of galena, Robert Emmett Dye
Electrode reactions in zinc electrolysis, Ernest R. Cole
Electrodialysis of tomato juice, Raghunath R. Khetan
Electrogalvanizing and drawing of steel wires, Thomas Joseph O'Keefe Jr.
Electroless and chemical metal deposition on human tooth enamel., Richard Doyle Christie
Electrolysis of neutral solutions of ZnSO₄, Knud Fabricius Hansen
Electrolysis of water in a copper sulphate solution, Hermann Otto Schulze
Electrolyte and substrate effects on copper nucleation, Kuo-Shi Teng
Electrolytic and furnace refining of copper in south east Missouri, Ray Gould Knickerbocker
Electrolytic and spontaneous spray deposition of organic assisted cerium conversion coatings for the corrosion protection of aluminum alloys, Alexander Albert Williams
Electrolytic corrosion of reinforcing steel in concrete., Lawrence D. Green
Electrolytic reduction of galena in fused salt, Peter Simonds
Electrolytic reduction of zinc from acidic sulfate solutions, Kenneth Dale Gielow
Electromagnetic compatibility of integrated circuit clock design, Vijay Kanagachalam
Electromagnetic coupling through apertures in a conducting plane, Mark David Randol
Electromagnetic modeling of distributed coaxial cable crack sensors in reinforced concrete members, Mei Wang
Electromechanical power generation and AC/DC distribution for space application, Sushant Barave
Electron and positron collision with hydrogen and alkali atoms, Vladimir E. Bubelev
Electron beam characterization of carbon nanostructures, Eric Samuel Mandell
Electron-cadmium ionization for energies near overlapping autoionizing resonances, Muzaffer Mustafa Tabanli
Electron capture and ionization dynamics in ion-Rydberg collisions, Kevin Ray Cornelius
Electron double capture in proton-helium collisions, Joel A. Brand
Electron emission from ferroelectrics, Weiming Zhang
Electron-hydrogen atom scattering in the presence of an electromagnetic field, John Thomas Reed III
Electronic and structural characterizations of cerium-based corrosion inhibitors, Ahmed M. Shahin
Electronic transitions in diatomic molecules, James O. Hornkohl
Electron-impact ionization of molecules, Junfang Gao
Electron loss processes of one and two electron atoms colliding with ions, Alan E. Wetmore
Electron microscope study of the systems cadmium-cadmium chloride and lead-lead chloride, Dennis O'Neill
Electronstriction in the lead magnesium niobate-lead titanate-barium titanate system, Kevin Christopher Solofra
Electron transitions in multiply-charged ion-helium collisions, M. Lou McKenzie
Electron transport coefficients and excitation processes in gaseous mixtures containing mercuric bromide, Howard Lundgren Brooks
Electron transport through two irreducibly-coupled Aharonov-Bohm rings with applications to nanostructure quantum computing circuits, Casey Andrew Cain
Electro-reduction of bromate on mercury, Jaw-Shin Chang
Electrothermic dry distillation of zinc, Ira Nathan Goff
Elementary length topologies constructed using pseudo-norms with values in Tikhohov semi-fields, Jackie Ray Hamm
Elevated temperature behavior of a magnesium based bulk metallic glass, Neal C. Ross
Elevated temperature mechanical properties of zirconium diboride based ceramics, Eric W. Neuman
Elution of beta-galactosidase from the complex between beta-galactosidase and anti-beta-galactosidase monoclonal antibody, Jai-Woo Chang
Elutriation of flotation products, Guenther Walter Frotscher
EMAP4 : a 3-D finite element code for analyzing problems in electromagnetics, Prem Kumar Ganeshan
EMAP5 applications and improvements, Hao Wang
EMAP : a three-dimensional finite element code for modeling electromagnetic radiation problems, Mohammad Wares Ali
Embankment on Vertical Drains - Pore Pressures During Construction, M. Jamiolkowski and R. Lancellotta
Embankments Built Over Swamps, Samuel Y. Ng and James C. Rudd
Embedded optimal control of mobile robot formations using neural networks, Bryan M. Brenner
Emerging technology supply chain model for additive manufacturing, David M. Dietrich
Emerson Hall, Missouri University of Science and Technology
EMI chip-to-TEM cell coupling for a microcontroller and EMI coupling resulting from Via transition and reference plane change, Hemant Bishnoi
EMI failure analysis techniques and noise prediction for trace crossing split planes, Weifeng Pan
EMI investigation and modeling of a flat panel display, Satyajeet Shinde
EMI investigation of a hybrid electric vehicle traction drive, Timothy Tin-Shing Pak
EMI modeling of coupling from high-speed digital lines to I/O lines, Wei Cui
Emission source microscopy for electromagnetic interference source localization, Pratik Rajesh Maheshwari
Emissions testing of methyl soyate based oil as a two stroke engine lubricant, Scot Roche
EMI suppression of DC-DC synchronous buck converters by layout optimizations and EMI prediction using non-linear and SPICE circuit co-simulation, Ankit Bhargava
Empirical determination of WRSK component failure distributions., Allison Elaine Kuehl De Kanel
Empirical dynamic modeling and nonlinear force control of friction stir welding, Xin Zhao
Empirical evaluation of the eccentric orifice in small diameter pipes, Gary A. Hinz
Empirical investigation of enhanced air fins, Stephen John Dale Rucker
Empirical spectral representations obtained from attenuation data for a tungsten target x-ray tube operated from 10-70 kVCP, Leonard Arthur Heneke
Empirical study of managerial incentives in differential organizational settings relating to environmental regulations, Mark Gilman Benkovich
Emulsification and emulsion stability at temperature close to the HLB-temperature., Concepcion Solans
Enabling frequency and voltage regulation in microgrids using wind power plants, Anshuman Shrikant Vaidya
Enabling manufacturing excellence with formalized systems architecting and knowledge-based systems, Darwin Wilford Petersen
Enabling wind turbine generators to participate in power grid frequency regulation for enhanced stability, HongTao Ma
Enantio-enrichment of alpha-hydroxy acids through immobilized-lipase catalyzed hydrolysis of their esters, Samit Kapoor
Enantiomeric separation by capillary gas chromatography using derivatized cyclodextrin stationary phases, Weiyong Li
Enantiomeric separation by high-performance liquid chromatography using cyclodextrin stationary phases, San-Chun Chang
Enantiomeric separation via chromatography using cyclodextrin stationary phases, Yubing Tang
Endocrine disrupting chemicals in streams of Northern and Southern Missouri, Chih-Chin Liu
Endogeneity bias and two-stage least squares: a simulation study, Xujun Wang
Endogenous metabolism of Polyporus sulfureus. : Utilization of exogenous carbohydrates and fatty acids, Shu-Mei Wang
Energy and voltage management methods for multilevel converters for bulk power system power quality improvement, Atousa Yazdani
Energy-aware and secure routing with trust levels for wireless ad hoc and sensor networks, Eyad Taqieddin
Energy conservation and integrated waterjet mining and milling, Jorge Gerardo Garcia Joo
Energy Dissipation of Thin-walled Cold-formed Steel Members, David A. Padilla-Llano, Christopher D. Moen, and Matthew Eatherton
Energy efficiency in wastewater treatment: Standards for Missouri facilities, Samantha Lauren Markus
Energy efficient and latency aware adaptive compression in wireless sensor networks, Thomas Mark Daniel Szalapski
Energy efficient clustering and secure data aggregation in wireless sensor networks, Julia Albath
Energy efficient key management protocols to secure sensor networks, Biswajit Panja
Energy efficient processor operation and vibration based energy harvesting schemes for wireless sensor nodes, Phani Kumar Gajjala
Energy efficient security and privacy management in sensor clouds, Vimal Kumar
Energy-efficient task-scheduling and networking protocols for secure wireless networks, Sandeep Kolli
Energy efficient wireless sensor network protocols for monitoring and prognostics of large scale systems, James W. Fonda
Energy expenditure analysis of redesigned mechanical assists for medium girder bridge, Karthik Kumar
Energy methods for data-track association in multitarget-multisensor problems, Hyungwug Park
Energy storage capacity of reversible liquid phase Diels-Alder reactions as determined by drop calorimetry, Chih-Ping Chung
Energy transfer collisions in a flowing helium afterglow with additive impurities: emission spectra and radiative lifetimes, Frederick H. K. Rambow
Energy transfer collision studies in atomic and molecular beams: excited state polarization and reaction cross section measurements, David William Fahey
Engineering and geological work at Cananea, Mexico, Edward Dale Lynton
Engineering Design of Rock Slope Reinforcement Based on Non-Linear Joint Strength Model, Stavros C. Bandis
Engineering Education on Cold-formed Steel Design, Paul A. Seaburg
Engineering geologic site characterization of some major highway bridges in Missouri, Shahram Taherinia
Engineering geology of the Jefferson City, Missouri area, Briget Claire Doyle
Engineering methods for integrating structural dynamics equation of motion, Carlos Arturo Gutierrez
Engineering on the playground : K-4 science resources, Theresa M. Swift
Engineering practice in the Tri-State District, Richard John Stroup
Engineering properties and clay mineralogy of Illinois coal-mine roof shales and underclays, Sanga Tangchawal
Engineering properties and their relationship to the inconsistencies in permeability of Ozark red clays used in farm pond construction, Roddy Jack Rogers
Engineering properties of Bloomington-Normal subsoils, Rohn Dunseth Abbott
Engineering properties of meander belt deposits of the Lower Mississippi River Valley, Jeffrey Allen Sacre
Engineering solutions for the displacement of rigid retaining walls subjected to earthquake loads, Dharma Raj Shakya
Enhanced evaporation of water droplets due to surface contamination, Robert Bernard Hughes
Enhanced functional analysis system technique for managing complex engineering projects, Sofia Tan
Enhanced heavy oil recovery by alkali-surfactant in the Pennsylvania Warner sandstone, Rabia Mohamed Hunky
Enhanced nucleation of tin using anodic pulsed current, Hsing-Wei Chang
Enhanced photorefractivity in a polymeric composite photosensitized with modified carbon nanotubes, Naveen Kumar Lingam
Enhancement and subaxial subluxation detection in cervical spine X-ray images, Santosh Seetharaman
Enhancement factors for gas-absorption with second-order irreversible chemical reaction., Fred Hon-Ming Law
Enhancement of a robot vision system with a sixteen-bit microprocessor-based single board computer, Paul Anthony Braun
Enhancement of thin-film solar cell efficiency by light trapping, Takumi Yoshida
Enhancements to EMAP5, Yun Ji
Enhancing engineering education using thematic case-based learning, Jose F. Vivas
Enhancing the aerodynamic performance of stepped airfoils, Ranganadhan Voona
Enhancing the cooperative computation model of stereo vision with a parallel color correlator, Mark Stanley. Shylanski
Enhancing the reactivity of soybean oil toward free-radical cures, Utpal Mulchand Shah
Enhancing the reactivity of soy bean oil towards free-radical cures, Vishal Midha
Enthalpy of transfer between polar and nonpolar compounds., Dan Thomas Hoffmann
Entropic analysis of a dual-mode scramjet engine for system performance/operability enhancement, Regan Tackett
Environmental effects on composite-girder bridge structures, J. Leroy Hulsey
Environmental geochemistry of metal contaminated sediments from the Big River system of southeastern Missouri, Helen Carrie Bender
Environmental impact study of abandoned oil and gas wells in Lee's Summit, Missouri, Edward A. May
Environmental law for engineers, Robert Lee Aston
Environmentally friendly, rare earth-based inhibitors in conversion coatings and paint for the corrosion protection of aluminum alloys, Scott A. Hayes
Enzymatic modifications of soybean oil to improve its lubricating properties, Sudhir Lamba
Enzymatic synthesis and characterization of acidic amino acid oligomers, Hao Wang
Enzymatic synthesis and characterization of alpha-hydroxy acid and amino acid co-oligomers, Mathur Rajesh
Enzymatic synthesis and characterization of oligopeptides, co-oligopeptides and hydroxy acid capped polypeptides in mixed aqueous organic media, Santhana Srinivasan
Enzymatic synthesis and LC, MS and MS-MS characterization of tailored peptides, Hareesh Kumar Reddy Palli
Enzymatic synthesis of polyesters, Amol A. Mungikar
Epitaxial Electrodeposition, Hiten M. Kothari
Epitaxial electrodeposition of chiral and spintronic metal oxides, Hiten M. Kothari
Epitaxial electrodeposition of metal oxide films and superlattices which exhibit resistance switching, Rakesh V. Gudavarthy
Epoxy resin admixture for concrete, Kuo-Chu Hu
Epoxy Resin Grout System for Solutions to Traditional Geotechnical Problems, A. V. Shroff, D. P. Amin, and D. L. Shah
Equation of state model for the water, ammonia, carbon dioxide system, Kaylynn Sue Johnston
Equilibria between MoO₂ and liquid molybdenum oxide, Prakash Bakhru
Equilibrium and dynamic aspects of water/oil/surfactant systems, Myungsoo Kim
Equilibrium, rate studies, and economic evaluation on adsorption and variable-temperature stepwise desorption, Suvit Kulvaranon
Equilibrium, stability and dynamics of microdrops, Xianzhong Zhang
Equipment modules for the equation oriented approach to simulation, Patrick Francis Anthony Cummins
Equivalent circuit for transient conduction and convection systems, Bassam Sabry Mohammad Abdelnabi
Equivalent circuit of unsymmetrical inductance diode using Linvill lumped model, Donald Lawrence Willyard
Erosion and Repair of Unlined Spillway Chute Excavated in Rock, David Mathews, Vlad G. Perlea, Francke C. Walberg, and Douglas R. Anderson
Erosion of unsaturated clay in a pinhole test., David Arthur Lewis
Error analysis of rational approximations of functions with emphasis on minimax techniques, Mary Frances Good
Error probability evaluation of communication systems in impulsive noise using gauss quadrature integration., Ender Ahmet Kefoğlu
ESCA characterization of flotation products from a lead-zinc-copper concentrator on the new lead belt of Southeast Missouri., Kevin Leroy Purdy
Essentials of rock drill design, Lister Merriken Cummings
Establishing workload limitations for application in human systems integration, Muhammet Servet Gulum
Establishment of a torsion pendulum and its evaluation, Ashwin Kantilal Ghatalia
Estimating bench design parameters for open-cut excavation., Rajni Kant Gandhi
Estimating bounds for nonidentifiale parameters using potential outcomes, Thidaporn Supapakorn
Estimating Post-Liquefaction Displacements in Embankment Dams and Priorities Remediation Measures, W. D. Liam Finn
Estimating power bus noise in low-cost printed circuits boards, Huihui Hu
Estimating the capacity of two-dimensional channels, Asif Iqbal Mohammad
Estimating the Response of Cold-formed Steel Frame Shear Walls, American Iron and Steel Institute
Estimation and tabulation of bias coefficients for regression analysis in incompletely specified linear models., Harry Kerry Edwards
Estimation, modeling and identification of electromagnetic crosstalk and emissions in automotive and integrated circuit applications, Xiaopeng Dong
Estimation of 1-dimensional seismic site response and liquefaction susceptibility of three Missouri River bridges, Craig K. Kaibel
Estimation of aggregate deleterious content, Gary William Davis
Estimation of concrete durability factor, Justin Andrew Carr
Estimation of delay at traffic actuated signals: case study comparison of SimTraffic and CORSIM, Sripathi Reddy Jitta
Estimation of desorbed compositions with variable-temperature stepwise desorption, Chi Min Shu
Estimation of film boiling heat transfer coefficients for cylindrical heaters in corresponding states fluids, Gary Joseph Capone
Estimation of regional trends in gravity using gram orthogonal polynomials, Stanley Dean Thompson
Estimation of restraint forces for z-purlin roofs under gravity loads, American Iron and Steel Institute
Estimation of Sound Transmission Class and Impact Insulation Class Rating for Steel Framed Assemblies, American Iron and Steel Institute
Estimation of the process noise covariance in homing guidance, Yen-Chi Hsu
Estimation of vehicle transfer functions., Leonard Francis Laskowski III
Ethanol fermentation with continuous product removal by carbon dioxide stripping and pulsed feed, Padraig Kevin Walsh
EtherAnnotate: a transparent malware analysis tool for integrating dynamic and static examination, Joshua Michael Eads
Ethernet performance : design and implementation study, Michael M. Chaney
Ethylene process optimization - constraint relaxation and bounds adjustment., Kenneth Ray Jinkerson
European Recommendations for Cold-formed Sheet Steel in Building, E. R. Bryan
European Recommendations for Mechanical Connections in Thin-walled Structural Steel Elements, A. W. Toma
European Research on Pallet, Drive-in and Drive-through Racks, Jan W. B. Stark and Kees Tilburgs
Evaluating product planning projects using real options, Prasenjit Shil
Evaluating the accuracy of a harmonic study, John Joseph Nichols
Evaluating the effectiveness of multi-spectral remote sensing data for lithological mapping in arid regions: a quantitative approach with examples from the Makkah Neoproterozoic region, Saudi Arabia, Nawwaf Awad Al Muntshry
Evaluation and application of dye tracers in Karst terrain for determining aquifer characteristics, Milton Frank Bradley
Evaluation and application of dye tracing in a karst terrain, James William Scanlan
Evaluation of a cation isotopic substitution technique in conjunction with a high temperature gas pycnometer for determining the stoichiometry of materials, Michael Clair Graves
Evaluation of a Differentially Settled Tank, S. M. Gazioglu and J. L. Withiam
Evaluation of alternative methods for surface preparation and deposition of cerium-based conversion coatings on aluminum alloys, William J. Gammill
Evaluation of a near-surface low-level radioactive waste disposal facility for the state of Missouri, Christine Lang Nelson
Evaluation of an engine controller with an EMC expert system, Derick E. Skouby
Evaluation of an innovative FRP bridge deck system, Prakash Kumar
Evaluation of anomalous deposition mechanisms in alloy electrogalvanizing, Hung-Ming Wang
Evaluation of antimicrobial activities of volatiles produced during rapid volatilization of oils, Sangeetha Ramamurthy
Evaluation of a performance measuring postprocessor., Önder Kemal Kefoğlu
Evaluation of artificial coal seam construction for testing of the UMR Hydrominer., Ronny Jal Sadri
Evaluation of a sub-optimum digital receiver., Gregory Clark Copeland
Evaluation of biogenic oil esters as obscurants in the visible region, Ramesh Chand
Evaluation of bond design specifications for concrete girders strengthened with CFRP laminates, Feifei Lu
Evaluation of cascaded inertial vibration isolation systems, Rajnikant Bhikhabhai Patel
Evaluation of city and region planning techniques, Charles Clay Miller
Evaluation of combustion properties of various fuels in compression ignition engines with different combustion systems, Michael David Marra
Evaluation of crystallite size and strain from X-ray diffraction pattern, Jen-Kuan Yau
Evaluation of Elastically Restrained Compression Flanges of Cold-formed C-shaped Sections, G. Haaijer, K. H. Klippstein, and J. H. Garrett Jr.
Evaluation of energy saving alternatives for HVAC systems, Yogita Shirsat
Evaluation of estimation techniques for the probability of symbol error in the simulation of digital communication systems, Kevin W. Schneider
Evaluation of externally bonded CFRP systems for the strengthening of RC slabs, Kah Yong Tan
Evaluation of fiber-matrix compatibility of high-temperature metal-matrix composites, Darrell John Dixon
Evaluation of functionality changes in regulatory control system processes case study: airworthiness qualification process, Melvin Leo Johnson
Evaluation of liquefaction-induced lateral spreading in the midwest, Kermit Nathanial Applegate
Evaluation of macrocyclic antibiotics as chiral selectors for high performance liquid chromatography, Christina Sue Bagwill
Evaluation of metal detection audio alert signals of AN/PSS-14 by means of real time visualization, Sandesh Srikantaiah Chandrashekar
Evaluation of methods for analysis of multi-degree-of-freedom systems with damping, Brijgopal R. Mohta
Evaluation of methods for the recovery, chemical and toxicological characterization of trace organics, James Robert Matthews
Evaluation of new sulfonate based reagents in the separation of quartz from magnetite, Ravi Pillai
Evaluation of non-flat architecture coatings at various levels of volatile organic compounds, Jose Miguel Farias
Evaluation of pile bearing capacity by use of the wave equation, Stuart H. Williams
Evaluation of polyaniline in corrosion protection and microwave initiated free radical catalyzed polymerizations: polystyrene, Srinivas Pravin Sitaram
Evaluation of power factor controllers for enhancing voltage stability, Rajesh Pudhota
Evaluation of power system insulation systems, utilizing Kerr cell techniques., Jackson Jiin-Cherng Chen
Evaluation of protective paint films on steel by x-ray diffraction techniques, Donald Charles Knobeloch
Evaluation of quenching media using the end-quench hardenability test, Subodh C. Das Gupta
Evaluation of reliability-centered maintenance techniques for electric substation applications, Jeffrey Alan Knottek
Evaluation of Remedial In-waste Leachate Head Reduction, Denise E. Mills and Donald A. Cordell
Evaluation of sealant materials and hydraulic conductivity in wells with PVC casing, Jeffrey Scott Balmer
Evaluation of simple and complex models for mass transfer in the non-isothermal adsorption of single and binary component mixtures from an inert carrier gas, Joseph D. O'Shea
Evaluation of skin-core adhesion bond and low-velocity impact behavior of honeycomb sandwich structures, Ramanjaneya R. Butukuri
Evaluation of SNR spectral distance measures as objective measures of speech quality, Ju Chien Hsu
Evaluation of spinel refractory interactions with steel in coreless induction furnaces, José María Soto Perdomo
Evaluation of standardized performance characteristics of a heat pipe air-to-air heat exchanger., Gregory Joe Gudac
Evaluation of SU8 and ruthenium oxide materials for microfluidic devices, Margaret Theresa Audrain
Evaluation of superconducting magnetic energy storage systems for application to electric utility systems., Haur Daniel Shaw
Evaluation of tensile and bearing capacities of bolted, cold-formed, steel connections, Bruce Dean Holcomb
Evaluation of the base test method for predicting the flexural strength of standing seam roof systems under gravity loading, Thomas M. Murray and Steven D. Brooks
Evaluation of the carbon adsorption method with parallel solvent extraction studies, Stanley Kent Wagher
Evaluation of the coordination chemistry of 2-(2'-pyridyl)imidazole with selected palladium (II) compounds, Theresa Marie Pierce
Evaluation of the Effect of Saturated Silty and Fine Sand Foundation Improved by Vibro-Flotation in Seismic Area, Wang Yuqing, Zhang Weiquan, and Qiao Taiping
Evaluation of the effect of vehicle performance on consumer satisfaction, Elizabeth A. Cudney
Evaluation of the effects of various environmental conditions on reinforced concrete columns wrapped with FRP sheets, Sang-Wook Bae
Evaluation of the Failure of an Important Dike in The Netherlands, J. Dekker
Evaluation of the force constants of non-polar gases from viscosity data, Kei-Sin Wei
Evaluation of the force constants of non-polar gases from viscosity data, Charles Warren Keller
Evaluation of (the intrinsic conducting polymer) polyaniline as a corrosion inhibitor on (aircraft grade) aluminum alloys, Matthew Shannon Pittman
Evaluation of the orientation of 90⁰ and 180⁰ reinforcing bar hooks, Nichole Lynn Podhorsky
Evaluation of the Reagan and Lamotte Sandstones in Southwestern Missouri for carbon dioxide sequestration, Todd Jeffrey Miller
Evaluation of the results of gravity and load tests of c and z purlin roof systems, Teoman Peköz
Evaluation of the Site Investigation and Construction Related Aspects of the Milwaukee's Crosstown Deep Tunnel, R. C. Ilsley, S. B. Fradkin, and E. F. Shorey
Evaluation of the Taum Sauk Upper Reservoir failure, Quentin Paul Gehring
Evaluation of uncertainty in geotechnical analysis by means of extended second-moment reliability methods, James M. Keane
Evaluation of variable speed limits using a genetic algorithm approach to calibrate a VISSIM model, Brian Joseph Schaefer
Evaporation and condensation of zinc, Shailesh Bhanuprasad Vora
Event detection from click-through data via query clustering, Prabhu Kumar Angajala
Event history clipping in real time systems, Marutikumar Chittajallu
Evidence pertaining to the origin and deposition of ore deposits, James Edward McGoughran
Evidence relative to the effect of mechanical mixing of charges in the fire assay, James Keller Beach
Evolutionary computing driven search based software testing and correction, Joshua Lee Wilkerson
Evolution of Design and Construction of Lornex L-L Tailings Dam, M. D. (Dal) Scott and Robert C. Lo
Evolvability in the phylogeny of the ontogenesis of artificial networks of spiking neurons, Amber D. Fischer
Evolving AISI Design Provisions -- an Overview, Albert L. Johnson
Evolving decision trees for the categorization of software, Jasenko Hosic
Evolving intelligent agents for adaptive first responder virtual training, Alex J. Berry
Evolving neural networks in classification, Sunghwan Sohn
Examination of additions of boron to the intermetallic compound titanium aluminide, Gerald B. Feldewerth
Examination of chromium-chromium silicide composites and methods of improving toughness, Terry Alan Cruse
Examination of Cr-Cr₃Si-NbC & Cr-(Cr,Mo)₃Si alloys for industrial applications, Martin G. Perez
Examination of exopolysaccharides in heavy metal laden wastewater biofilm., Liyun Xie
Examination of exporting as an innovation: concerns in acceptance of innovation., Brenda Iceline Tenes
Examination of kerr effects on non-uniform electric field, Mohammad Fotouhi-Ardekani
Examination of management techniques employed in automated operations., Stephen Edward Kipp
Examination of shoulder debris to improve shoulder rumble strip designs for bicyclists, Patricia Angľica Perž
Examining the effects of variable clay contents and variable water contents on mass flows simulated in a circular rotating flume, William Richard Mehrer
Examining the efficiency of multimodal transportation systems: a systems dynamics approach, Lizzette Pérez-Lespier
Excavation Behaviour of Soft Marine Clay Deposit in South Korea, Young-Nam Lee and Seung-Won Lee
Excessive Seepage Losses at Westwood Lake Dam, B. Bailey, E. Bloom, T. R. West, and J. A. Mundell
Excessive Settlement in Buildings, A. Verghese Chummar
Excitation of source electromagnetic waves at microwave frequencies using optical techniques, M. Davarpanah
Excitation of surface electromagnetic waves on water and their applications., Anil Kumar Singh
Excitation of whispering gallery modes in glass microspheres using optical fiber couplers, Sudha Sneha Devarakonda
Exflow - an interactive graphics package for the design and simulation of digital systems, Shingfat Stephen Ching
Existing Pile Load Capacity Evaluation, Alan Kropp
Expansion and Rehabilitation of the State Fish Pier in Gloucester, Massachusetts, Cetin Soydemir, K.M. Murtagh, R.E. Bertolino, and Edward B. Kinner
Expansion of an existing power system - a study, Suresh Arunachalam
Expansion of DYNUMR to general chemical process simulation, I-Shan Chien
Expansive Soil Pavement Design Using Case Studies, G. R. McKeen and R. L. Lytton
Expectation maximization and its application in modeling, segmentation and anomaly detection, Ritesh Ganju
Expedient method to determine active zone depth for expansive soils in the St. Louis, Missouri area, Robert Allen Abbott
Experience in Ground Improvement by Dynamic Compaction and Preloading at Half Moon Bay – Saudi Arabia, N. Ghosh and M. M. Tabba
Experiences of the Support Designs in the Two Large Underground Openings in India, R. K. Goel, J. L. Jethwa, and A. K. Dube
Experimental analysis and modeling of laser aided manufacturing process (LAMP), Kaushik Phatak
Experimental Analysis of Large Lateral Displacement of Piles in Centrifuge, Bouafia Ali
Experimental analysis of the repeatability of a functional model derivation method, Mark Andrew Kurfman
Experimental analysis of v-belt tensile loads, John Mark Wiesehan
Experimental and analytical evaluation of FRP-confined large size reinforced concrete columns, Silvia Rocca
Experimental and computational investigation of flow of pebbles in a pebble bed nuclear reactor, Vaibhav B. Khane
Experimental and computational investigations of hydrogen safety, dispersion and combustion for transportation applications, Shravan K. Vudumu
Experimental and computational studies of the aerodynamic characteristics of airfoils with backward-facing steps, Stephen Daniel Witherspoon
Experimental and modeling comparison of modular photovoltaic-thermal solar panels, Nicole C. Annis
Experimental and modeling study of a viscous fluid damper with Bingham plastic and effective mass for vibration reduction, Thomas Perry Lohman
Experimental and numerical study of the adsorption process in a carbon canister, Pavan Shivaram
Experimental and simulation studies of two-phase flow in a stirred tank, Maethee Chandavimol
Experimental Approach Embankments at Salt Fork River Bridges on US 177 and Their Initial Performance, John M. Benson and Donald R. Snethen
Experimental case study to compare the measuring capabilities of a manual coordinate measuring machine with traditional inspection equipment, Sanjay Radhakrishnan
Experimental characterization of a piezoelectric friction damper, Gabriel T. Garrett
Experimental characterization of the stress-strain behavior of the titanium matrix (SCS-6/Beta 21S) composites, Ronald Eugene Platz
Experimental determination of dynamic properties of aluminum including Poisson's ratio, Terry Lee Holman
Experimental determination of improved aerodynamic characteristics utilizing biplane wing configurations, Elmer Carl Olson
Experimental determination of strain-energy density function of rubber and 3-D finite element stress analysis of rubber in hose coupling, Raj Shekhar Roychoudhury
Experimental Evaluation of a Vehicular Access Door Subjected to Hurricane Force Wind Pressures, Tian Gao and Christopher D. Moen
Experimental evaluation of thermal strains and stresses, T. F. Lehnhoff
Experimental evaluation of thermal stresses on the outer surface of a thick-walled tube., Vinodray Thobhandas Patel
Experimental investigation for improving the machinability of nickel alloy in turning, Ramachandran Subramania Sarma
Experimental investigation in the drilling of advanced composite material, Scott Ryan Birdsong
Experimental investigation of automotive refueling system behavior and development of boundary conditions for computer simulation, David William Pugh
Experimental investigation of cutting forces, temperature and surface roughness in end-milling of Hastelloy C-2000, Ryan Matthews
Experimental investigation of energy release rates during delamination of laminated composite flat plates and doubly curved shells, Pandit Raghavendra Rao
Experimental investigation of enhanced surfaces in rectangular ducts, Jonathan David Bridges
Experimental investigation of RF fading channels and receiver detection, Saurav Kumar Subedi
Experimental investigation of supporting wire interference effects in the supersonic near wakes of slender bodies., Dale M. Pitt
Experimental investigation of the shear flow zone in torsional members, T. (Tarek) Alkhrdaji
Experimental Investigation on 6 Feet Wide Cold-formed Steel Framed Shear Walls with Steel Sheet Sheathing, Cheng Yu and Yujie Chen
Experimental investigation on vibrations induced in pressurized waterjet systems, Ming-June Tzeng
Experimental investigations of pseudospark discharge and pseudospark produced intense electron beams, Jing Hu
Experimental measurements of laser-doppler anemometry in a baffled mixing tank, Kai-Yuan Chen
Experimental measurements of natural and mixed convective heat transfer in an asymmetrically heated parallel-plate channel, Mark Bryson Younger
Experimental optimization of microstructure and mechanical properties of friction stir processed materials, Vikas Dixit
Experimental stress analysis of bolts in a flange coupling, Bansidhar Shah
Experimental stress analysis of bolts in a flange coupling, Vijay Rastogi
Experimental studies in gas metal arc welding of aluminum alloys, Blaine David Christensen
Experimental studies of supporting wire disturbances in the near viscous wakes of slender supersonic bodies, Kenneth Anthony Mirly
Experimental studies on seismic behavior of metallic dampers for bridge applications, Eric Robert Bothe
Experimental studies on the kinetics of adsorption of beta-galactosidase interacting with immobilized anti-beta-galactosidase, Barbara June Hearn
Experimental study for determining dynamic response of flexible linkage mechanisms, Kwei-Cheng Peng
Experimental study of air mixing and its enhancement in a damper-controlled mixing chamber, Changlin Sun
Experimental study of electron density and confinement time in an electrostatically-plugged cusp device using a microwave interferometer., Robert Louis Hayward
Experimental study of instabilities in mixed convection flows, H. I. Abu-Mulaweh
Experimental study of mixed convection in laminar separated backward-facing step flows, H. I. Abu-Mulaweh
Experimental study of neutron reflection from a cylindrical surface, Dale Lee Holtzscher
Experimental study of the interaction between surfactants and preformed particle gels, Farag Awadh Muhammed
Experimental study of the uptake of lead and cadmium by Pseudomonas Aeruginosa NRRL B-4452, Adwait Anil Bhagwat
Experimental Study on Seismic Behavior of Industrial Storage Racks, Helmut Krawinkler
Experimental Techniques for Plate Buckling, W. Pennington Vann and John Sehested
Experimental techniques in the kinetic study of rapid gas phase reactions, William Dean Burch
Experimental testing and modeling of automotive belt drive tensioner, Jiaxin Zhao
Experimental validation of an integrated FRP and visco-elastic hardening, damping, and wave-modulating system for blast resistance enhancement of RC columns, Brian Henry Wood
Experimental vapor-liquid equilibria of propyne with propane, propene and propadiene, Edward Allen Kyser
Experimental verification of a mathematical model of cerebrospinal fluid shunt valves, Michael G. Parry
Experimental verification of the use of free-energy minimization techniques for modelling complex sulfide smelting, Harry Eugene Flynn
Experiment and numerical analysis of system level ESD coupling, Qing Cai
Experiment Determination of Required Lateral Restraint Forces for Z-purlin Supported, Sloped Metal Roof Systems, Spencer R. Lee and Thomas M. Murray
Experiments and modeling of shear-driven film separation, J. L. Wegener
Experiments on a telluride ore and design of plant for treating same, Charles Le Clair King and John Severin Schroeder
Experiments on Rotational Restraint of Sheathing, Benjamin W. Schafer
Experiments on Trapezoidal Steel Sheets in Bending, Allan Bergfelt, Bo Edlund, and Hans Larsson
Expert scheduling system, Derya Alasya
Expert system for designing gating systems for permanent mold tilt pour casting process, Yi-Kang An
Expert systems and transmission system coordination, Manuel Antonio Torres
Expert system technology applied to the sensor allocation problem for multisensor integration, Edwin Rowe Carney
Exploration for barite deposits in Cole County, Missouri, Arthur William Brune
Exploratory study of barriers to use of Feigenbaum's quality cost strategy within design engineering firms, David Patrick Loduca
Exploring cooperative learning in an initial computer programming course using Visual Basic, Christopher Duane Brown
Exploring join caching in programming codes to reduce runtime execution, Swetha Surapaneni
Exploring run-time reduction in programming codes via query optimization and caching, Venkata Krishna Suhas Nerella
Exploring the use of a commercial game engine for the development of educational software, Hussain Alafaireet
Explosive performance parameters: A digital computer solution and error analysis, Robert T. Stelloh
Explosives recognition and awareness training: a psychological approach to pre-blast mitigation, James Wade Hawkins
Extended crack tip plasticity in metal matrix composites, Mark Wallace Kennett
Extended multi-sensor data characterization and prediction of surface roughness and bore tolerance in circular end milling, Yalcin M. Ertekin
Extended operation of flying capacitor multilevel inverters, Jing Huang
Extension of some theorems of complex functional analysis to linear spaces over the quaternions and Cayley numbers, James E. Jamison
Extensions, generalizations, characterizations and testing for independence through infinite divisibility, Edward Joul Danial
Extraction of alumina from potash feldspar, kaolinite and Alcoa red mud, Rahmi Dedeoglu
Extraction of carrier frequency from a speech modulated single-sideband signal, Yau-Kae Sheu
Extraction of silver by the wet way, Justo Garcia Martinez
Extremal structure of convex sets, J. C. Hankins
Eyes don't lie: understanding users' first impressions on website design using eye tracking, Sirjana Dahal
F-15E sensor failure transient analysis, in the pitch axis, John P. Hancock
Fabrication and evaluation of rice hull derived nano silica/silicon carbide composites, Ganesh Ayalasomayajula
Fabrication and mechanical property analysis of a transparent, glass fiber reinforced polymer matrix composite, James R. Olson
Fabrication of a memory device using polyaniline nanofibers and gold nanoparticles, Krunal R. Waghela
Fabrication of ceramic components using freeze-form extrusion fabrication, Tieshu Huang
Fabrication of ceramic matrix composites by tape casting and lamination, Stephen B. Haug
Fabrication of ceramic powders, thin films, and fibers using a liquid-mix process, Chen-Lung Fan
Fabrication of complex ceramic parts with sacrificial material using freeze-form extrusion fabrication, Diego Armando Garcia Montaño
Fabrication of electrode support structure for planar solid oxide fuel cells, Dustin Beeaff
Fabrication of long-period fiber gratings by CO₂ laser irradiation for high temperature applications, Tao Wei
Fabrication of multilayer ceramic capacitors via thermoplastic coextrusion, Dustin Reid Beeaff
Fabrication of SERS active nanostructures by femtosecond laser micromachining, Matthew Aaron Olson
Fabrication of soy oil epoxy resin based composites, Vinay Prabhakar Pai
Fabry-Perot Interferometer based CO₂ Sensor using Ionic-liquid, Mujahid Abdul
Face recognition in the wavelet domain using the eigenface method, William Scott Curtis
Factor Analysis of Damage to Small Earth Dams Due to the 1995 Hyogoken-Nambu Earthquake, Tomoya Iwashita, Akira Nakamura, Shinji Yokoyama, Norihisa Matsumoto, and Hitoshi Yoshida
Factorial analysis of some variables and their optimization for the production of sound die castings, Dinesh Shantilal Patel
Factors affecting nitrogen dissolution in sodium meta-phosphate glass, Yongren Benjamin Peng
Factors affecting organic recovery by the organics-carbon adsorbable method,, William Perry Clarke
Factors affecting solids separation of aerobically digested sludge, Sandra Meyer
Factors affecting splashing in a cylindrical vessel, James Preston Hyink
Factors affecting the ductility and microstructure of Ti-6Al-6V-2Sn titanium alloy weldments, Michael John Ball
Factors affecting the electrolytic deposition of small amounts of lead as lead dioxide and the composition of the deposit, Thomas Gordon Day
Factors affecting the strength of sub-coal materials and the prediction of strength from index properties., John Burton Creveling
Factors controlling ductility in ultrafine grain aluminum alloys under monotonic and cyclic loading, Partha Sarathi De
Factors influencing success in the packaging machinery integration process, Tunyarut Viriyapituk
Factors leading to successful application of improvement tools for quality management, Bassam A. Elmaimani
Faculty Senate Minutes 1972 - 1973, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1973 - 1974, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1974 - 1975, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1975 - 1976, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1976 - 1977, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1977 - 1978, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1978 - 1979, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1979 - 1980, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1980 - 1981, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1981 - 1982, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1982 - 1983, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1983 - 1984, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1984 - 1985, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1985 - 1986, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1986 - 1987, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1987 - 1988, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1988 - 1989, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1989 - 1990, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1990 - 1991, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1991 - 1992, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1992 - 1993, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1993 - 1994, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1994 - 1995, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1995 - 1996, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1996 - 1997, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1997 - 1998, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1998 - 1999, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 1999 - 2000, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 2000 - 2001, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 2001 - 2002, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 2002 - 2003, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 2003 - 2004, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 2004 - 2005, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 2005 - 2006, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes 2006 - 2007, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes April 16, 2009, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes April 17, 2008, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes April 17, 2014, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes April, 18 2013, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes April 19, 2012, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes April 21, 2011, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes April 26, 2012 (Special Meeting), Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes April 28, 2009, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes April 29, 2010, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes August 11, 2011, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes February 16, 2012, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes February 17, 2011, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes February 18, 2010, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes February 19, 2009, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes February 20, 2014, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes February 21, 2008, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes February 21, 2013, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes January 17, 2008, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes January 19, 2012, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes January 20, 2011, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes January 21, 2010, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes January 22, 2009, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes January 23, 2014, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes January 24, 2013, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes June 12, 2014 (Special Meeting), Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes June 14, 2012, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes June 16, 2011, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes June 17, 2010, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes June 18. 2009, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes June 19, 2014, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes June 20, 2013, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes March 08, 2012, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes March 17, 2011, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes March 20, 2014, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes March 21, 2013, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes Nov. 18, 2010, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes November 14, 2013, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes November 15, 2007, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes November 15, 2012, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes November 17, 2011, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes November 18, 2010, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes November 19, 2009, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes November 20, 2008, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes October 14, 2010, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes October 15, 2009, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes October 16, 2008, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes October 18, 2007, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes October 18, 2012, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes October 20, 2011, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes October 23, 2014, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes October 24, 2013, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes September 15, 2011, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes September 16, 2010, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes September 18. 2008, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes September 18, 2014, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes September 19, 2013, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes September 20, 2007, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes September 20, 2012, Missouri University of Science and Technology Faculty Senate
Faculty Senate Minutes September 24, 2009, Missouri University of Science and Technology Faculty Senate
Fade, wear, and fracture behavior of phenolic based non-asbestos friction composites, Gopalkrishna Padmanabhan
Failure analysis of architectural monolithic glass panels subjected to blast loading, Mahesh Shibarooru Shetty
Failure analysis of binary address decoders, Kanaiyalal Jekisondas Gandhi
Failure analysis of high temperature composites, Yonglu Zhao
Failure and Reconstruction of a Waste Containment Pond Slope, Dorairaja Raghu and Robert J. Van Orden
Failure and Repair of the Slope of Railway Embankments and Expansive Soils, Zun Jing Ke, Chao-Hai Yong, and Yun-Huang Chang
Failure characteristics and durability of phosphate glass, Adam Jay Lang
Failure detection in polymerization process using on-line process identification., Ross Robert Klie
Failure of a Dredged Slope in a Sensitive Clay, D. P. LaGatta and S. L. Whiteside
Failure of an Embankment on Soft Clay, M. K. Yegian and Hugo Perez Lasalvia
Failure of an Oil Storage Tank, A. Verghese Chummar
Failure of a Pipeline in an 800-year Old Debris Fill, D. G. Anderson, C. C. Sundberg, and R. J. Robertson
Failure of a Salt Aragonite Storage Pad, Yong S. Chae
Failure of a Transport Tunnel Below a Dolomite Stockpile, B. B. Broms and Y. S. Lau
Failure of Buildings on Mound ̶ A Case Study, U. N. Sinha
Failure of Excavation Bracing System for New World Plaza at Changchun in China, M. S. Wang, X. Wu, and M. C. Wang
Failure of Flood Banks Due to Under Seepage, Arthur Marsland
Failure of lined and unlined small-scale cavities in rock-like materials, Seung-ki Yang
Failure of Micaceous Waste Tailings Dam, W. F. Brumund
Failure of Railway Embankment, J. Christodoulias and H. Giannaros
Failure of the Ghana Law School Building in Accra, Ghana, N. K. Kumapley and S. Ramachandra
Failure of Thin-walled Members under Patch Loading, M. Elgaaly
Failure Slope in Clay Shales in Aratu Bay - Brazil, R. B. Guimarães
Failure studies of glass fibers, Nathan P. Lower
Fair and optimal resource allocation in wireless sensor networks, Vinodhini Ravikumar
False alarm mitigation using grayscale moment invariants for airborne mine detection, Pradeep Sriram
Faraday effect optical temperature sensors, Benxin Wu
Far infrared transmission of diamond structure semiconductor single crystal: silicon and germanium, Jason E. Peters
Farm energy from crops., Daniel Lee Million
Fast breeder reactor blanket management: Comparison of LMFBR and GCFR blankets, Mohammad Hossein Jankhah
Fastener strength in diaphragm braced members, Amir Simaan, George Winter, and Teoman Peköz
Fast flux measurement by a single multi-threshold foil, Kenneth Lawrence Cage
Fast neutron effects on transistor scattering parameters, David Leslie Gray
Fast neutron induced resistivity changes in order-disorder Fe₃Al, Bruce A. Betts
Fast sphere decoder for MIMO systems, Praveen G. Krishnan
Fast symmetric graph drawing : theory and realization, Ronald Thomas Pacheco
Fast transient contingency evaluation in power systems., Rodrigo S. Chamorro
Fate and effects of chemically-precipitated phosphorus in anaerobic digestion, Douglas Wayne Max
Fate and transport of volatile organic compounds (VOCs) in phytoremediation systems, Xingmao Ma
Fate of genetically modified plant tissue in soil: what happens to the DNA, Paula Kay Mihalcik
Fatigue analysis of V-ribbed serpentine belt drive system, Saikrishna Sundararaman
Fatigue Behavior of Sheet-steel Fabrication Details, K. H. Klippstein
Fatigue of friction stir welded lap joints with sealants, Kenneth Doering
Fatigue performance evaluation and non-destructive testing of adhesively bonded composite repairs of aircraft structures, Navrag Singh
Fatigue testing of light gage metal forms, Kenneth W. Mouw
Fault analysis computer program development for industrial/commercial electrical distribution systems, Willy Yun-Chieh Hsu
Fault detection and prediction with application to rotating machinery, Gary R. Halligan
Fault detection in an internal combustion engine using exhaust acoustics, Mark S. Rootz
Fault detection in asynchronous sequential circuits, Jeng-Chuan Kau
Fault detection in combinational circuits using a statistical approach, William Edward Pierson
Fault detection in combinational networks, Alexander Rahm
Fault detection on distribution laterals, David A. Rhein
Fault detection on sequential machines, Chung-Tao David Wang
Fault diagnosis of sequential circuits, Virgil Willis Hughes
Faulting as related to lead-zinc mineralization, west end of the Milliken mine, Reynolds County, Missouri, Donald Richard Taylor
Fault location on multi-terminal lines based on travelling wavefronts recognition, Ching Hsiang Chang
Fault modeling and testability of domino CMOS logic, Pavankumar Chandrasekhar
Fault-propagation folding, depth to detachment, and variations in folding intensity in the overthrust belt of southwest Utah, Lynne White Fielding
Fault propagation timing analysis to aid in the selection of sensors fro health management systems, Jeremy Johnson
Fault simulation in digital system design., Hsing-Yuan Chang
Fault tolerance in concurrent systems through formal methods, Hanan Lutfiyya
Fault-tolerant ring embeddings in hypercubes: a reconfigurable approach, Jun-Lin Liu
FDTD modeling incorporating two-port networks and planewave sources in a three dimensional space, Kuifeng Hu
FDTD modeling of dispersive composite magnetic material, Jing Wu
Feasibility of a capital project : a case study in Engineering Management, Paul Anthony Higgins
Feasibility of a human performance model in consequence management, Kashmeera Ghosh
Feasibility of identification of excitation system parameters, Eric Ludwig
Feasibility of non-uniform widely-spaced arrays for adaptive beamforming systems with associated RF-test-bed hardware, Christopher Lloyd Osterloh
Feasibility of Portland cement stabilization of dioxin-contaminated soil, Mary Christine Shore
Feasibility study for an energy-from-refuse system for the Phelps County, Missouri., V. Swaminathan
Feasibility study of 3-D cylinder data fitting on the bar-retained removable overdenture design, Po-Wen Yang
Feasibility study of an electromagnetic trap fusion reactor., Dennis Gilbert Blondin
Feasibility study of instruments for electrical impedance tomography (EIT) and magnetic induction measurement of skin cancer, Deepak Narayanaswamy
Feasibility study of plutonium based MOX fuel online burnup analysis using gamma spectroscopy, Matthew L. Dennis
Feasibility study of the discrete sine transform in parallel image processing, Cynthia Kay Fields
Feasibility study of using a steam power system in a small garden tractor, Niranjan Kumar Doshi
Feasibility study to determine method for developing robot specifications, Jon Charles Falke
Feature and color analysis of images of the cervix, Shoba Umamaheswaran
Feature-based concurrent design system for turned parts, Srinivasa Rao Chalasani
Feature-based modeling of three-dimensional moving mechanical parts, Tung-Cheng Chou
Feature correspondence and pose determination for autonomous 3-D object inspection, Sanjeev Agarwal
Feature detection algorithms for a vision-based inspection system, John Alexis Johnson
Feature extraction for robotic control utilizing a computer vision system, David James Stephens
Feature Extraction Toolbox and image segmentation using cellular neural networks, Shiva Kumar Sooryavaram
Feature recognition in ultrasonic images through artificial neural networks, Timothy Andrew Bauer
Features of AISI's 1986 Cold-formed Steel Design Manual, Calvin Robert Clauer
Federal regulation to assure quality in the design and construction of nuclear power plants., Larry Gene Harmon
Feed drive design for numerically controlled machine tools, Subash Bhatia
Feed-forward control circuit for a computer controlled DC motor - AC generator set., Richard Allan Smith
Femtosecond and nanosecond laser fabricated substrate for surface-enhanced Raman scattering, Adam Hamdorf
Femtosecond laser micromachining of microstructures for sensing and detection, Yukun Han
Femtosecond laser micro-structuring of silicon wafer in water confinement, Songping Wu
Fermentation of acid hydrolysate., Cecilia Meyer Freeman
Fiber inline pressure and acoustic sensor fabricated with femtosecond laser, Yinan Zhang
Fiber optic strain sensing and neural networks for health monitoring of composite plates, Farhad Akhavan
Fiber reinforced composites using recycled polystyrene foam and natural fibers, James Bartholomew Castle
Field analysis of photovoltaic ultracapacitor energy storage system, Jenna Vujic
Field application of the membrane filter method for bacteriological quality determination of water, Charles Liston Gambill
Field computation by triangular patches for arbitrary surfaces, Tony Hsu
Field Consolidation of a Moderately Organic Hetrogeneous Deposit, P. D. Deo and A. S. Mehta
Field coupled electrostatic discharge sensitivity database, Zhen Li
Field evaluation of composite materials for bridge strengthening, Alexis Andres Lopez-Inojosa
Field Experiments on Jute Soil Stabilisers, A. K. Gupta, O. P. Yadav, and Jai Bhagwan
Field investigation of chemical interactions between groundwater monitoring well construction materials and hazardous waste contaminants (Wilsonville, Illinois), Theodore Thomas Riegel
Field investigation of spalling in bridge decks with partial-depth precast concrete panel systems using non-destructive testing, Kandi Rebecca Wieberg
Field Measurement on a Slope Cutting With Tensile Inclusions, Tamotsu Matsui, Ka Ching San, Terumasa Amano, and Yoshinori Otani
Field Observation and Finite Element Analysis of a Subway Excavation, Roberto Azevedo and Luis Anibal Santos
Field Observation of Pore Pressure in Soft Clay, R. L. Wei
Field performance of alternative and cost efficient cast in place and precast prestressed concrete bridge approach slabs, Nathan Price Muncy
Field permeability determination of partially saturated fine grained soil, Edward G. Rapp
Field programmable gate array based multiple input multiple output transmitter, Richa Shekhar
Field resolution tests with the Metrogon lens, Robert Greig Livingston
Film boiling from horizontal plates with low thermal capacity, K. M. Ragsdell
Film boiling from inclined flat surfaces, Charles Ernest Price
Film boiling of benzene, freon 113, freon 11, and normal pentane from horizontal surfaces at atmospheric pressure, Richard Stanley Kistler
Film boiling of Freon 113, Normal Pentane, Cyclopentane, and Benzene from cylindrical surfaces at moderate pressures, Gary Joseph Capone
Film boiling of nitrogen from a spherical heating surface at atmospheric pressure and standard gravity, Juan Jorge Mariányi
Filtering, modeling, and control of axial force signals in friction stir welding processes, Thomas Michael Oakes
Filter materials for emergency use in diatomite type water filters, Robert Wassell McLeane
Filter width versus sample length for systems using correlation estimates., Richard Harlow McLean
Final sintering of Cr₂O₃ with minor additions of MgO and sintering of MgO with minor additions of Cr₂O₃, Gordon E. Jungquist
Financial prediction and trading via reinforcement learning and soft computing, Hailin Li
Financial ratios as predictors of corporate acquisition candidates by industry, Sehrazat Omurtak Saridereli
Fine coal single stage dewatering and briquetting process, Matthew Thomas Tobey
Fine particle classification using dilute fluidized beds, Rajasekharan Pillai Annapoorneswari
Finite and boundary element analysis of three-dimensional linear elastostatics, Amir H. Yahyavi
Finite difference solution for triangular plates, Hao-Yang Huang
Finite difference synthetic seismogram with a point source., Douglas John Foster
Finite-difference time-domain analysis in two-dimensions, Md. Ishfaqur Raza
Finite element analysis and experimental evaluation of buckling phenomena in laminated composite tubes and plates, Mahmood Farhadinia
Finite element analysis and fatigue test on the bicuspids to support theory of abfraction, Madhuchandra Mahadevaswamy
Finite element analysis of automotive serpentine belt operation and failure, Guiyong Song
Finite element analysis of axisymmetric deformations of thick thermoviscoplastic targets, Xingju Chen
Finite element analysis of blade-formation interactions in excavation, Osei Brown
Finite element analysis of bolted tubular connections., Darrell Lee
Finite element analysis of depleted uranium and tungsten in dynamic shear banding and penetration, Zheng Peng
Finite element analysis of dynamic shear bands in 2-D and 3-D deformations of thermoviscoplastic materials, Xiangtong Zhang
Finite element analysis of laminated composite beams using a higher order shear deformation theory, Kiran Madhav Bangera
Finite element analysis of laminated composite plates, Virat Chomkwah
Finite element analysis of laminated composite plates with piezoelectric sensors and actuators, Amit Agarwal
Finite element analysis of paint stripping technique using dry ice blasting, Yellayi Srinivas Shastry
Finite element analysis of two-dimensional overland flow, Keyvan Asghari
Finite element analysis of viscous incompressible flow with free surface, Jeong Moon Lee
Finite element and experimental investigation of delamination and debonding of composite materials under mode-II static and fatigue loadings, Nand K. Kochar
Finite element applications to higher-order eigenfunction, linear elastic fracture analyses., Leo B. Valla Jr.
Finite element investigation of bolted mine roof structures, Janakkumar Girjashanker Dave
Finite element modeling of bird strikes and parametric evaluation using design of experiments (DOE), Venkata Varaha Raja Naga Prathyush Bheem Reddy
Finite element modeling of sound transmission through flat, slightly curved and double panels, Sharvin Motamedi
Finite element modeling of structural adhesives using nonlinear viscoelastic analysis, Sreesh Kumar Inguva
Finite element modelling of acoustic singularities with application to near and far field propeller noise, James Edward Steck
Finite element simulation and experimental investigation of residual stresses, cutting forces and surface roughness in orthogonal turning of titanium alloy, Anthony Onochie Oteka
Finite element simulation of low velocity large soft missle impact of laminated architectural glass, Bhavana Kasarla
Finite element solution of steady state axisymmetric penetration problems, T. Gobinath
Finite element static and dynamic analysis of stiffened laminated plates, Mahesh Kolli
Finite element stress analysis of a three-dimension thick walled chain hoist adapter, Pei-Rong Lin
Finite element study of heat flow through a barrier bar stratigraphic trap, Kirk William Lawson
Finite element three-dimensional nonlinear transient analysis of the shaded pole motor with emphasis on harmonics analysis, Hamid Reza Sadeghi
Finite-horizon optimal control of linear and a class of nonlinear systems, Qiming Zhao
Finite plane strain thermomechanical rolling contact for a nonlinear visoelastic cylinder, Michael Gene Hilgers
Finned tube contact conductance studies for a generalized correlation, Randall A. Wood
Fire clays and refractory materials, James A. Pack
Fire clays of Phelps County, Arthur Harrison Cronk
Fire Protection Through Modern Building Codes, 5th Edition, James C. Spence, Walter G. Wells, and D. F. Boring
Fire protection through modern day building codes, D. F. Boring, James C. Spence, and Walter G. Wells
Fire Resistance Ratings of Load-bearing Steel Stud Walls, Subcommittee on Fire Technology of the Committee on Construction Codes and Standards
Fire Resistance Ratings of Load Bearing Steel Stud Walls with Gypsum Wallboard Protection, American Iron and Steel Institute
Fire safe structural steel: a design guide, Joseph Escalada, Georgi Hall, Brandon Matchen, Hoang Nguyen, and Alexander Williams
Firing behavior of Missouri plastic fire clay, William E. Crockett
Firing behavior tests and other tests on a Missouri stoneware clay to determine its commercial possibilities, Ivan Martin Niedling
First-principles studies of complex hydrides for Li-ion battery and hydrogen storage applications, Timothy Hudson Mason
Fitting discrete probabilistic frequency distributions to disturbed traffic flow at an unsignalized urban intersection, Horst Walter Kaminsky
Fixed bed sorption with recycle, John Thomas Casey
Fixed-bed wood gasification with recirculation, Tyau-Jeen Lin
Fixed film development and substrate removal., Yow-Chyun Liu
Fixed point theory and stability results for fixed point iteration procedures, Alberta Marie Harder
Fixed point theory for non-self maps, Linda Marie Saliga
Fixed site facilitated transport in Co-chelate containing plasma polymer films, Youngson Choe
Fixture clamping condition modeling and monitoring, Jung-Hua Yeh
Fixture configuration synthesis under dynamic machining conditions, Richard Thomas Meyer
Flexible microsensor array for monitoring dissolved oxygen and water content in the plant root zone, Sandeep Sathyan
Flexible robotic welding cell development, Richard J. Straus
Flexural and bond characteristics of steel reinforced polymer (SRP) and steel reinforced grout (SRG), Erin N. Wobbe
Flexural Behavior and Strength of Cold-formed Steel L-headers, Jesse Pauls, Lei Xu, and S. R. Fox
Flexural behavior of web elements with openings, Roger A. LaBoube, Wei-wen Yu, and K. D. Batson
Flexural behavior of web elements with openings, Roger A. LaBoube, Wei-wen Yu, and Ming-Yang Shan
Flexural behavior of web elements with openings, Roger A. LaBoube, Wei-wen Yu, Ming-Yang Shan, and K. D. Batson
Flexural behavior of webs with openings, Kimberly D. Hodges-Batson
Flexural Buckling in Cold-formed Steel Structural Members, Peter Lorincz
Flexural Properties of Corrugated Metal Roofing, Howard L. Wakeland
Flexural strengthening of corroded steel bridge members with composite materials, Tarun Gupta
Flexural-torsional Buckling of Storage Rack Columns, O. Roos and Gregory J. Hancock
Flight control with adaptive critic neural network, Dongchen Han
Flood control measures for Salina, Kansas, Robert Justice Paulette and Guy Robert Scott
Flood control with retarding basin type reservoirs in Meramec Basin, Missouri, Ilhan Kaya Ozbilen
Floods of May 1943 in Missouri, John August Short
Florida kaolin as the chief clay ingredient for a sanitary ware casting body, Hugo Logan Harrod
Flotation applied to a Mexican silver ore, Albert Leo Trent
Flotation applied to basic ores, Orion Dexter Neal
Flotation applied to Joplin sludge, Thaddeus C. Wilson and Gustaf Axel Hellstrand
Flotation kinetics of a Viburnum, Missouri lead ore, Scott Lee Volner
Flotation of a western complex ore, Guy Verdier Martin
Flotation of the oxidized ores of zinc, Fred Henry Bunge
Flotation tests on a table sludge from the Golden Rod Milling Company at Tar River, Oklahoma, William H. Kamp
Flow analysis of a pressurized water reactor core, Charles Ramon Daily
Flow field and heat transfer for developing flow of molten glass in a duct, Russell Ralph Beckmeyer
Flow structure in the near-wake of single solid and fluid objects as measured by particle image velocimetry, Hidekazu No
FLOWWARE -- A flow charting method to describe digital systems, Wayne Everett Omohundro
Fluid dynamics of an atomizer nozzle, Bhaskar Sengupta
Fluid flow in pipes of rectangular cross sections, Bruce Harold Bradford
Fluid flow related phenomena and inclusion motion in continuous casting strands, Yufeng Wang
Fluid inclusion geothermometry of Tri-State sphalerite, Chi-Sheng Wei
Fluidized bed biomass gasification using various feedstocks., Joseph Cherian
Fluidized-bed gasifier engine system using rice hulls, Luis Cruz Baja
Fluorescence based measurement of concentration in stirred tanks, Jennifer Jan Ferrell Quigley
Fluorescence determination of relative conversion in a stirred baffled reactor tank with reaction, William Don Bockelman
Fluorescent, root-colonizing recombinant bacteria and their use in phytoremediation, Amanda W. Gilbertson
Fluorspar mining in Kentucky, Walter Coffran Richards
Flux augmentation of permanent magnet direct current machines, Donald F. Harker
FM-CW radar design and development for on-site refractory wall thickness measurement, Brian Carroll
Fogging in underground mine atmospheres., Michael A. Schimmelpfennig
Follow the leader motion strategy in double-octahedral parallel trusses, Ira Dunn
Foraminifera of the Cenozoic and recent genus Sphaerogypsina Galloway, Wayne C. Horton
Foraminifera of the type section of the Archusa marl of Mississippi (Eocene, Claiborne group, Wautubbee formation), Nathan Eugene Crockett
Force analysis of involute spur gears, Janakkumar Girjashanker Dave
Force control of parallel machine tools, Raghusimha Sudhakara
Forced convection heat transfer coefficients and induction heating., Max Edwin Light
Forced convective heat and mass transfer from a sphere to a fluid in creeping flow, Andre Trevor Spears
Forced response optimization of structures, Patrick Benedict O'Mahony
Force sensing of an asymmetric dielectric barrier discharge using mechanical resonators, Mark Dawson Emanuel
Forecasting building maintenance using the Weibull Process, Ann Kathlene Yeoman
Forecasting using the T-method, Parthiv Akshay Shah
Forge Hammer Foundation on Dilative Soil, S. J. Yang
Formability of 356 Aluminum, Karol Krumrey Schrems
Formation and removal of pesticides and pesticide transformation products during water treatment, Evelyn F. Chamberlain
Formation characterization of the Lamotte Sandstone in southwestern Missouri, Pongsathorn Boongird
Formation control of car-like mobile robots, Shweta Annapurani Panimadai Ramaswamy
Formation control of mobile robots and unmanned aerial vehicles, Travis Alan Dierks
Formation of amyloid fibrils by diblock peptides, Kunal Mukesh Naik
Formation of ceramic composites by free sintering of coated powders, Ching-Li Hu
Formation of hollow hydroxyapatite microspheres, Kenan Patrick Fears
Formation of iron-rimmed sandstone nodules on earth; terrestrial analogue for the formation of Martian blueberries?, Katherine Charlotte Muller
Formation of mullite ceramics and composites by a glass-ceramic route, De-Yin Jeng
Formation of secondary graphite during the heat treatment of nodular cast iron weldments., Mehmet Nuri Birer
Formulating hedging strategies for financial risk mitigation in competitive U.S. electricity markets, Karthik Viswanathan
Forth interfacing techniques, Ruey-Lin Lu
Forward converter for solar power applications, Nickolas Arthur McFowland
Forward modeling control with soft constraints, James Donald Feher
Fossil algae in the St. Louis limestone, near St. Louis, Missouri., Sherris Ragsdale Myers
Fossil and recent Beryciform otoliths: An adjunct to ichthyological classification., C. Kurt. Lamber
Fossil otoliths of some lower Cenozoic perciform fishes of the Gulf Coast, Mostafa Juma Salem
Foundation-Bearing-Rotor Interaction Problem in Controlling Vibrations in a 120 Mw Turbo Generator, Krishen Kumar and Shamsher Prakash
Foundation Construction on Random Fill, Nasser Massoudi
Foundation Damage of Structures in Kobe and Remediation, Tamotsu Matsui
Foundation Design and Construction for a Large Mill Complex, C. R. I. Clayton, J. Milititsky, and L. J. L. Carvalho
Foundation Design and Performance of the World's Tallest Building, Petronas Towers, Clyde N. Baker Jr., Elliott Drumright, Leonard M. Joseph, and Ir. Tarique Azam
Foundation Failure of the St. Thomas Church, New Delhi, Devendra Sharma
Foundation Failures Associated with Salt Rock and Surrounding Coastal Plain, A. Orhan Erol and Abdulmohsin W. Dhowian
Foundation Heave at ASCO II Nuclear Power Plant, R. B. Fallgren and C. R. McClure
Foundation Investigation and Treatment for the Main Dam, Italpu Project, John G. Cabrera
Foundation Movement Monitoring of Heavy Structures – A Case History, M. R. Lewis and A. Sanver
Foundation Performance of Very Old Structures, S. C. Handa
Foundation Problems and Solutions at the Bridge River, Powerhouse No. 1, H. Taylor and A. P. Joseph
Foundation Problems of a Cable Stayed High Bridge and Its Approaches, Elias Sotiropoulos and Elias Alkalais
Foundation Reinforcement of Old ALA Building, K. Zand Parsa
Foundations for aquatic oil wells, Henry Emmett Gross
Foundations for automatic modeling of transistors for computer aided circuit design, Leehter Yao
Foundations of coverage algorithms in autonomic mobile sensor networks, Mark Edward Snyder
Foundations of failure-free rotorcraft component design through function-failure simularity information and PCA decomposition methodologies, Rory Andrew Roberts
Foundations on Friction Creep Piles in Soft Clays, Sven Hansbo
Foundations on Stone Columns Resting on Coralline Limestone, K. S. A. Rahim and A. W. Dhowian
Foundations Performance of Large Diameter Tanks, J. L. M. Clemente, A. Desai, H. Senapathy, and L. W. Young Jr.
Foundry parameters for casting high-aluminum lightweight steel in complex shapes, Angella Marie Schulte
Four square gearbox testing., Donald Roland Speck
FPGA implementation of PSO algorithm and neural networks, Parviz Palangpour
Fractal dimension estimation in color image processing, Gregory John Hardy
Fractal oxidation kinetics and risk evaluation of spontaneous combustion in coal mines, Yutao Zhang
Fractals with arbitrary segment lengths, Daniel Michael Doerer
Fractionation of fission elements by electrodialysis, George Joseph Bub
Fracture behavior of unidirectional composite laminates with fiber and matrix damage, Roger Lee Recker
Fracture characterization of cortical bone pins using acoustic emission analysis, Sherri Rea Williams
Fracture mechanics of glass panels subjected to low velocity missle impact, Jiaqing Yu
Fracture surface energy determinations of high density polycrystalline ceramics, Gene Arthur Pahlmann
Fracture toughness and crack growth rates in friction stir welded joints of AL 7075-T651, Christopher Kempf
Frame Analysis and Design of Industrial Cold-formed Steel Racks, Teoman Pekoz, Ali Karakaplan, and Ali Koç
Free convection heat transfer from an inclined heated flat plate in air, Shu Chien Yung
Free-radical curing of soybean oil, Casey Patrick Morriss
Free-radical maleation of poly(butylene adipate-co-terephthalate) in supercritical carbon dioxide and its effect on the percolation and deformation mechanism of layered silicate nanocomposites, Alexandria Niemoeller
Free vibration of a three layered isotropic circular plate with an internal circular cavity, Tori Leigh Rollings
Free vibrations of circular cylindrical shells, Sushil Kumar Sharma
Freeze casting of bioactive glass and ceramic scaffolds for bone tissue engineering, Qiang Fu
Freeze extrusion fabrication of 13-93 bioactive glass scaffolds for bone repair, Nikhil D. Doiphode
Frequency-depth relationships for the GEM-300, an electromagnetic induction tool, Jonathan Blair Shawver
Frequency division using cascaded phase-locked loops, Curtis B. Abshier
Frequency response of rotating servo components, Yehuda Rachovitsky
Frequency-tunable orthogonally-fed elliptical slot imaging array, Mark A. Baumgartner
Freshwater losses to the sea and water level decline in northwest Libya, Mohammed Ahmed Attiga
Friction in small air pipes, Albert Park and Howard Kelsey Peterson
Friction of air in small pipes and fittings, Bejamin H. Cody and Ernest J. Allen
Friction stir channeling: an innovative technique for heat exchanger manufacturing, Nagarajan Balasubramanian
Friction stir form welding of aluminum structures, Kamini Ashokkumar Gupta
Friction stir microforming of superplastic alloys, Saurav Mohan
Friction stir processing for local modification of aluminum components, Anand Jambunathan
Friction stir processing of cast magnesium alloys, Timothy A. Freeney
Friction stir processing of magnesium alloys, Gaurav Bhargava
Friction stir spot welding of advanced high strength steels, Jeffrey M. Rodelas
Friction stir spot welding of aluminum alloys, Wei Yuan
Friction stir welding of high temperature alloys, Jiye Wang
From the Past to the Future of Landfill Engineering Through Case Histories, R. Kerry Rowe
Frost formation and its influence upon heat transfer, Jack Lewis Loper
Fuel loading for a low-leakage core in a pressurized water reactor, Omar Ivan Aguilar
Fuel spray characterization in a single cylinder port fuel injected engine, Richard Weston Horst
Fuel system development for liquid-phase injection of liquefied petroleum gas on small displacement engine, Jacob Leonard Brann
Fuller's earth in Southeast Missouri, Willard Farrar
Full- Scale Load Test of Caisson on Chicago Hardpan, Stephen A. Bucher, Raymond J. Krizek, and Dimitrios K. Atmatzidis
Fully differential cross sections for four-body scattering processes, Allison L. Harris
Fulton Hall, Missouri University of Science and Technology
Functional hierarchy based approach to enhance modularity and optimize life cycle aspects, Karthik L. Sivaramakrishnan
Functionally graded Ti6Sl4V and Inconel 625 by laser metal deposition, Syamala Rani Pulugurtha
Functional relationships among cap sealing parameters empolying response surface methodology, Chawapol Jariyawiroj
Functional testing of faults in asynchronous crossbar architecture, Sriram Venkateswaran
Function-based design tools to streamline design for Six Sigma execution and address uncertainty during early engineering design, Ryan S. Hutcheson
Function-based failure propagation method and application to design, Daniel A. Krus
Fundamental characterization and experimental evaluation of cuttings transport phenomena in horizontal wells, Jesus Ramon Rodriguez Leon
Fundamental properties of colloidal unimolecular polymer particles, Minghang Chen
Fundamentals of friction stir spot welding, Harsha Badarinarayan
Fundamental study of the role of cathode structure on zinc electrowinning, Horacio M. Aros
Furfural (furfuraldehyde) and some of its derivatives, Marion Smith Badollet
Furnace calculations, John McMillen Brooks
Further analysis and application of the multirate method for power system dynamic simulation, Jingjia Chen
Further Investigation of Light Gage Steel Forms As Reinforcement for Concrete Slabs, C. E. Ekberg Jr., R. M. Schuster, and Max L. Porter
Further investigation of the traveling-wave transistor, Robert J. Feugate
Further studies - heat transfer coefficients for liquids in forced convection normal to banks of staggered tubes, Terrell C. Claunch
Further studies of the catalytic oxidation of ortho-xylene to phthalic anhydride using a fluidized bed reactor., Richard Shih-Chun Chu
Further studies of vapor-liquid equilibria of methanol-ethylene glycol-water, Herbert Benjamin Sachs
Further studies on the effect of grinding aids for Portland cement clinker, Charles Lee Rakestraw
Fuzzy logic and tolerance design, Kannan Srikanth
Fuzzy logic approach to adaptive finite element mesh generation, Vivek Sudershankumar Sandell
Fuzzy logic controllers for restructurable flight control systems, Shih-Hao Howard Ho
Fuzzy set theory applied to generation system adequacy evaluation, Jonathan Leon Oliver
Gadolinia stabilized zirconia as a possible material for thermal barrier coatings, Jacob R. Gross
Gaging of the Gasconade River, Lawrence Collins and Sidney R. Hatch
GALS: genetic algorithms plus local search to solve the satisfiability problem, Nicole Anne Nemer-Preece
Galvanic stripping of Fe⁺³ and Pb⁺² ions and dissolution of metallic Fe, Zn, Pb and Cd using Di(2-ethylhexyl)phosphoric acid, Luis Miguel Chia Aquije
Galvanized Steel Framing for Residential Buildings, NAHB Research Center, Inc.
Gamma-ray dose rate from a spent PWR fuel assembly using the Monte Carlo technique, Ahmet Bozkurt
Gap-graded gravel for asphaltic paving mixtures, Ernest Harrington Martin
Gas and water flow through nanoscale porous media, Songyuan Liu
Gas chromatographic-mass spectrometric characterization of an oil aerosol-vapor microbial disinfectant, Prakash Wadhwa
Gas diffusion in activated carbon : dusty-gas model, Abdulmuhsen Rashed Alshamlan
Gas dispersion in liquid in static mixers in turbulent flow, Maethee Chandavimol
Gas dynamics and heat transfer in a packed pebble-bed reactor for the 4th generation nuclear energy, Rahman Abdulmohsin
Gaseous reactions in heteroporous media, Elmer Anthony Klavetter
Gasification of peat in an air blown fluidized bed reactor, John Anthony Underwood
Gas permeability measurement of unsaturated fine grained soils, Mohammad Taghi Izadi
Gas permeability of unsaturated fine grained soils, Rajiv Ali
Gas-solid and gas-liquid chromatographic stationary phases for the separation of volatiles and enantiomers, George Leo Reid
Gas-solid fluidized bed reactors: scale-up, flow regimes identification and hydrodynamics, Faraj Muftah Zaid
Gas-to-particle conversions of SO₂-NO₂-H₂O-air gas mixtures under specific UV irradiation, James Leonard Fowler
Gathering haunch design data by photoelasticity, Richard B. Heagler
Gating design and mold filling in the lost foam casting process, Mickey Dean Lawrence
GBS Platform Evaluation Using Field Instrumentation, Joseph M. Keaveny, Per Magne Aas, and Farrokh Nadim
Gender integration in basic combat training, Wayne Neal Sepitko
Generalization-based clustering in textual databases, Mustafa Seyrek
Generalized distance metric as a robust similarity measure for mobile object trajectories, Garima Pathak
Generalized Geometric Programming in Cold Formed Steel Design, S. Ramamurthy and R. H. Gallagher
Generalized optimal control of elastic and inelastic structures subjected to earthquake excitation, Peter Tian
Generalized programs for heat transfer analysis., Ceylung Chu
General method of procedure in the working out of the Uncompahgre Valley Project, Colorado, Leo J. Foster
General Report B for Theme Nine – Geotechnical History of Projects Other Than Presented in Sessions 1-8, Charles Mansur
General Report for Theme Five Case Histories in Geotechnical Earthquake Engineering, Gonzalo Castro
General Report for Theme One - Foundations for Structures and Failure Records, Robert C. Kirby and Guilaine Roussel
General Report for Theme Seven – Case Histories in Rock Mechanics, Alfred J. Hendson Jr.
General Report for Theme Six – Case Histories in Machine Foundations, Richard D. Woods
General Report for the Theme Three – Case Histories in Dams, Embankments and Slopes, D. E. Kleiner
General tracking control of linear axes for an educational rapid development system and a kinematically coupled system, Michael Anthony Fleming
Generation and evaluation of disinfectant aerosols/vapors, Tanuja P. Talim
Generic algorithms and NULL Convention Logic hardware implementation for unsigned and signed quad-rail multiplication, Samarsen Reddy Mallepalli
Generic kinematic simulation for verification of laser deposition tool paths, Sweta Dhaveji Chakravadhanula
Genesis of an expert system for UMR degree auditing, Ruth Sue Dare
Genetic algorithms - a new technique for solving the neutron spectrum unfolding problem, David Wayne Freeman
Genetic algorithms for aeroassisted trajectory optimization and time-optimal spacecraft reorientation controller design, Yao-Feng Cheng
Genetic algorithms with 3-parent crossover, Lawrence Vincent Edmondson
Genetic neuro-nester, Pipatpong Poshyanonda
Genetic-neuro scheduler, Sinchai Sittisathanchai
Geneva mechanism, Bin Zhang
Geochemical abundance of iodine, Jane Hanisch Bennett
Geochemical and biogeochemical studies in the Hansonburg Mining District, New Mexico, Alan Nathan Silverman
Geochemical and isotopic characterization of lead in fugitive dust from unsurfaced roads in Missouri, Emitt C. Witt
Geochemical and ore microscopic study of mineralized faults south east of Mena, Arkansas, Sorrya E. Abdel Aziz Ibrahim
Geochemical and petrological study of the Precambrian iron metallogenic province of Southeast Missouri, Geza Kisvarsanyi
Geochemical anomalies in the igneous wall rock at Mayflower Mine, Park City District, Utah, Zuhair Al-Shaieb
Geochemical prospecting applied to the Illinois-Kentucky fluorspar area, Matthew Peter Nackowski
Geochemical prospecting for copper in the northern part of Yuma County, Arizona, Abdul Razak Kasim Al-Hashimi
Geochemical prospecting study of the Einstein Vein, Madison County, Missouri., William John Bippus
Geochemistry and petrology of the Cold Springs Breccia Formation, Wichita Mountains, Oklahoma, Dana Marie Vidrine
Geochemistry of lead, zinc, copper, cobalt, nickel, cadmium, iron and manganese in surface waters and stream sediments, St. Francis River drainage basin, Southeastern, Missouri, Bhudeo Narayan Sinha
Geochemistry, paragenetic relationship, spatial distribution and factor analysis of selected trace elements at the Magmont Mine Southeast Missouri, Dil Mohan Singh Bhatia
Geo-Engineering Problems in the Spillway Foundations and Their Treatment at Guhai Reservoir Project in Gujurat, India, D. M. Pancholi, K. E. Modhwadia, and P. H. Vaidya
Geogrid Reinforced Soil Retaining Wall on Compressible Soils, R. L. Curtis, V. E. Chouery-Curtis, and D. A. Miller
Geological and geomorphological evolution of the Egyptian Nile between Aswan and Kom Ombo: A remote sensing and field study approach, Leslie Lansbery
Geological conditions and genesis of the ore deposits of the Rush Creek District, Marion County, Arkansas, William Melvin Weigel
Geologically-developed probabilistic seismic risk analysis, Huh-Yuan Liang
Geological mapping of an area along the Frisco Railroad between Cuba and Saint James, Willard Miles Benham and William Elliott
Geological sequestration of carbon dioxide by hydrous carbonate formation in steelmaking slag, C. Hank Rawlins
Geologic conditions affecting the accumulation of oil and gas in the Beggs District, Oklahoma, John Charles Miller
Geologic Considerations in Civil Constructions - Malaysian Case Studies, Boon K. Tan
Geologic examination of petroleum properties, Vachel Harry McNutt
Geology along the St. Louis and San Francisco Railroad from Rolla to Newburg, Victor H. Hughes
Geology and geophysics of the Darfur Megalake: implications for groundwater resources and paleo-environment, Ahmed Elsheikh
Geology and mineralization of the Jefferson Mine, Hardin County, Illinois, Robert Joe Cronk
Geology and mineralization of the Minerva Mine No. 1, Hardin County, Illinois, Matthew Peter Nackowski
Geology and mineralization, Ohio and Mt. Baldy Districts, Marysvale, Piute County, Utah, Laurence M. Nuelle
Geology and mineralization, West Lime Hills, Luna County, New Mexico, Martin Evans Staples
Geology and mineralogy of the Iron Mountain mine, St. Francois CO, Missouri, Mark Anthony Dudley
Geology and petrochemistry of the Mount Chase massive sulfide prospect, Penobscot County, Maine, Michael V. Scully
Geology and the barite potential of the Raymond Widel Area, Cooper County, Missouri, German Francisco
Geology, geochemistry and genesis of selected skarn deposits, Northern New Brunswick, Canada, Donald John Bachinski
Geology in the vicinity of Palmer, MO., Alfred Nicks Detweiler and John Kavanaugh Forman
Geology, Mineralogy, and fluid inclusion Geothermometry of the El Paso Gold Mine, Cripple Creek, Colorado., Charles Albon Lane
Geology of a carboniferous outlier in Lawrence County, Missouri, Maurice Merton Albertson
Geology of Beaver Quadrangle, Robert Justice Paulette and James Lawton Keelyn
Geology of Cienega Mining District, Northwestern Yuma County, Arizona, Elias Zambrano
Geology of Mohave County, Arizona, Earl Ross Householder
Geology of Pride Mine and New Standard Mine area, Northwestern Yuma County, Arizona, Henry E. Fernandez
Geology of the Acari iron mining district Arequipa, Peru, Raul Alejandro Zevallos
Geology of the Al-Khums area northwestern Libya with emphasis on the stratigraphy and biostratigraphy of the Al-Khums formation, Mostafa Juma Salem
Geology of the Annapolis Area, Iron County, Missouri, Richard A. Zimmermann
Geology of the Berryman area, Washington County, Missouri, Jack Alexander James
Geology of the Big Pass Tungsten Mine, Beaver County, Utah., Gregory Ralph Wessel
Geology of the Blanket lead-zinc deposit, Buick mine, Viburnum Trend, southeast Missouri, Douglas N. Mugel
Geology of the copper deposits in the Eminence region, Shannon County, Missouri, Lanny Lee Evans
Geology of the Crystal Mine, Hardin County, Illinois, John Amsden Emery
Geology of the east-central portion of the Nelson quadrangle, Clark County, Nevada, Tedral Kantor
Geology of the Einstein-Apex Tungsten Mine area, Joel B. Pomerene
Geology of the Escalante District, Iron County, Utah, James William Biehl
Geology of the Esterbrook Area, Converse and Albany Counties, Wyoming, Michael Nolan Greeley
Geology of the northeast portion of Des Arc Quadrangle, Iron and Madison Counties, Missouri, Wesley Dean Weixelman
Geology of the Northern half of the Ellington Quadrangle Missouri., Robert Charles. Thornton
Geology of the north half of the Meramec Spring Quadrangle, Missouri, Harold Edward Mueller
Geology of the northwest quarter of the Washington Quadrangle, Missouri, James Anthony Martin
Geology of the Ozark-Martin Mine area, Madison County, Missouri, William Clifton Hayes
Geology of the southern half of the Stoutland, Missouri Quadrangle, Chester Encell Nichols
Geology of the south half of the Meramec Spring Quadrangle, Missouri, Howard Joseph Yorston
Geology of the Stateline District, Utah-Nevada, Terry Moore Collins
Geomechanical characterization of reservoir & cap rocks for CO₂ sequestration, Sudarshan Govindarajan
Geometric design of a mass transfer sensor for indoor environments using computational fluid dynamics, Anjana Srirama
Geometric modeling and computer simulation of mechanical assemblies with changing topologies, Yong Fang
Geometric Nonlinear Dynamic Analysis of Locally Buckled Frames, George E. Blandford, Shien T. Wang, and Neng T. Wang
Geometry and foam density considerations in the flow of liquid metal in the lost foam process, Michael William Hill
Geomorphic development of the Fort Leonard Wood landscape, Paul E. Albertson
Geophysical, hydrological, and archaeological investigation in the east bank area of Luxor - Southern Egypt, Ahmed Ismail
Geophysical investigation of lead and zinc mine tailings at Saint Joe State Park, Park Hills, Missouri, Anthony David Buccellato
Geophysical investigations in a losing stream valley, Phelps County, Missouri, Douglas Wendel Whitman
Georgia kaolin as the China Clay constituent in floor and wall tile bodies, Alfred Arthur Mitchell
Geotechnical and Geologic Features of U.S. 189 in Provo Canyon, Utah, Thomas S. Lee and Steven H. Brandon
Geotechnical and Groundwater Site Characterization on the UMTRA Project, J. A. Caldwell, R. A. Rager, and L. Coons
Geotechnical Aspects of the Fort McHenry Tunnel - Design and Construction, S. K. Sarkar and G. A. Munfakh
Geotechnical Characterization of Subsoil Deposits at Cairo, Mohamed A. El-Sohby and S. Ossama Mazen
Geotechnical Investigation into Causes of Failure of a Gabion Retaining Wall, Edward A. Nowatzki and Brian P. Wrench
Geotechnical investigation of sandstone degradation of antiquities in Luxor, Egypt, Adam F. Sevi
Geotechnical Investigations for Foundation Design for Multi-storeyed Building, S. C. Handa, Swami Saran, G. Ramasamy, A. S. R. Rao, and B. Prakash
Geotechnical Problems and Performance Studies - Chilla Power Scheme, Hardwar, D. N. Bhargava, Dwarka Nath, S. N. Kapoor, and Sunde Singh
Geotechnical Problems and Treatments of Weathered Rock Seams Occurring in the Foundation of Karjan Dam, Western India, Indra Prakash and A. B. Vyas
Geotechnical Problems in a Bridge over Corinth Canal, S. G. Christoulas, N. A. Kalteziotis, and G. K. Tsiambaos
Geotechnical Risk and Reliability from Theory to Practice, Lenka S. Timiovska
Geotechnical Services for a Bridge in a Seismic Area, Filippo Ciuffi
Geotechnical Studies of Foundation of a Tilted Tank at Parikshatgarh, India, G. C. Nayak, B. Singh, and P. K. Jain
Geotechnical Studies of Foundation of a Tilted Tank at Parikshatgarh, India, G. C. Nayak, B. Singh, and P. K. Jain
Geothermometry at the Balmat No. 2 mine, New York by the FeS-ZnS system, Bruce R. Doe
Glass-ceramics for solid oxide fuel cell seals, Teng Zhang
Glass fiber reinforced polycarbonate composites, Wen Ching Hu
Glass fiber-reinforced polyurea strengthening of reinforced concrete, Courtney Elizabeth Greene
Glass formation and properties in the gallia-calcia system, Glenn Whichard
Glass formation and properties in the Sm₂O₃·Al₂O₃·SiO₂ system, Erik M. Erbe
Glass formation and properties in the Y₂0₃-A1₂0 ₃-Si0 ₂ system, Mark James Hyatt
Glass formation, structure and electrical properties of glasses in the Ag-As-Se System, Pradip Dhirajlal Patel
Glass microspheres for medical applications, Samuel D. Conzone
Glass-transition behavior of hybrid poly(methyl acrylate)-silica composites, Manikantan B. Nair
Glass transition behavior of thin poly(methyl methacrylate) films on silica, Moses T. Kabomo
Global homotopy continuation and stability analysis: optimal application to chemical engineering design, David Anthony Harney
Global stock index forecasting using multiple generalized regression neural networks with a gating network, Parinya Disorntetiwat
Glucose from corn cobs, Barney Nudelman
Glycerin reformation in high temperature and pressure water, Jason W. Picou
Glycoprotein characterization by HPLC-ESI-MS and anticancer drug screening and mechanism study, Junnan Chen
Gold chlorination, Edwin Thompson Perkins
Gold-magnetite nanoparticle-biomolecule conjugates: synthesis, properties and toxicity studies, Akshay Pariti
Gold precipitation, William H. Gill and Raphael Curier Alexander
Goodness-of-fit for the Weibull distribution with unknown parameters and censored sampling., Michael Edward Aho
GPR data analysis for hand held landmine detection, Partha Pratim Palit
GPSS generator for material handling., Garland Joseph Butler
GPU based processing for airborne detection, Dheeraj Singiresu
Graded-index fiber collimator enhanced extrinsic Fabry-Perot interferometer, Yinan Zhang
Grain boundary diffusion in ionic crystals, Kulwant Singh Sabharwal
Grain boundary self-diffusion in sodium chloride, Kenneth Ray Riggs
Grain size dependence of the dielectric breakdown strength of titanium dioxide dielectrics, Yang Ye
Grand Canonical Monte Carlo simulation of two interacting liquid-vapor interfaces of single component atomic fluids, Dan Walter Hawley
Grand Coulee Riverbank Stabilization – Case History of the Design of Remedial Measures, J. Lawrence Von Thun
Graph coloring algorithms on random graphs, Shi-Jen Lin
Graphical cost analysis, Pranlal Girdharlal Sheth
Graphical representation of compressed air formulae, John Thomas Vitt and Paul Andrew Philippi
Graphical solution of concentration at production wells of injected radioactive water tracers, George E. Vaughn Jr.
Graphical user interface for DYNUMR, Ming-Huei Liu
Graphics and its application to the progress and cost analyses of a house building construction company, Frank Lewis Leonard Wilson
Graphite aerogels and the formation mechanism of unusual micron-sized rod and helical structures, Clarissa Ann Wisner
Graph model analysis of computer structures, Ömür Taşar
Gray gas analysis of radiative preheating effects on shock induced combustion, Pratibha Raghunandan
Green roof water quality impacts and physicochemical stability, Grace Ella Harper
Grid frequency and voltage support using photovoltaic systems with energy storage assist, Ravi Bhatt
Ground control evaluation of the Sahara No. 20 mine Marion, Illinois., Marvin E. Adam
Ground Failure Investigation over Abandoned Coal Mines: A Case Study, Marlo G. Karfakis and Bruce A. Suprenant
Ground Heave Due to Pile Driving, J. P. Dugan Jr. and D. L. Freed
Ground Improvement at the Queensway Bay Downtown Harbor, Long Beach, California, Suji Somasundaram, Gamini Weeratunga, and Kris Khilnani
Ground Improvement for Oil Tank Farm in Indonesia, A. F. Abbs, J. M. Cognon, and R. W. N. Kelsey
Ground magnetic study of the Anderson Ridge Quadrangle, Fremont County, Wyoming., Roland Lee-Ping Chen
Ground Modifications by a Combination of Dynamic Compaction, Consolidation, and Replacement, Jie Han
Ground Motion Measurements from the Demolition of Steel Towers, Jagadish R. Joshi and Richard C. Lee
Ground motion sensitivity analyses for the greater St. Louis Metropolitan area, Ece Karadeniz
Ground Movement Characteristics above Mined Panels in Appalachia-an Empirical Approach, M. Karmis, T. Triplett, P. Schillizzi, and G. Hasenfus
Ground penetrating radar application for non-destructive testing: bridge deck inspection and dowel bar detection, Wooyoung Kim
Ground-penetrating radar: A tool to evaluate bridge scour, Doyle Joseph Webb
Ground penetrating radar investigations in Upper Kama potash mines, Oleg N. Kovin
Ground Response, Baltimore Lexington Market Tunnels, J. G. Engels and S. J. Calabrese
Ground Response to Sheet Pile Installation in Clay, Richard J. Finno, Dimitrios K. Atmatzidis, and Steven M. Nerby
Ground Vibrations Isolation by PC Wall-piles, Kiyoshi Hayakawa, Yukihiko Kani, Noriyuki Matsubara, Tamotsu Matsui, and Richard Woods
Groundwater circulation well performance prediction, Sarah Marie Elizabeth Stock
Groundwater Conditions and Drainage of a Large Slide, E. Sotiropoulos, B. Dendrou, and P. Papanikolaou
Groundwater development in rural Lemoa, Guatemala, Erin Lepper
Ground water investigation in the southern half of Franklin County, Missouri, Kemal Piskin
Ground water of the Uncompahgre Valley Montrose County, Colorado, Ted William Craig
Group contribution parameters for cycloalkanes, cycloakenes, and aromatic solutes in various solvents., David Lynn Bogart
Group contribution parameters for the enthalpy of transfer between polar and nonpolar solvents., Sumalee Punyakumleard
Grouting and freezing unconsolidated and water-bearing strata, Robert Walter Heins
Grouting a Water Tower Foundation in a Carbonate Formation, Dorairaja Raghu, David Antes, and Joseph J. Lifrieri
Grouting Evaluation Program of the Best Methods for Use of Microfine and Portland Cements During Treatment of the Rock Foundation at the Portugues Dam, John Conway and Tom Novak
Grouting in Consideration of Predominant Direction of Joints in Rock Masses, Masaki Kawasaki, Hitoshi Yoshida, and Yoshikazu Yamaguchi
Grouting to Control Deep Foundation Settlement, B. McClelland and E. J. Ulrich
Growth of ice crystals by diffusion in mixed phase clouds, Kiran Sonnad
Guest Lecture – Foundation Engineering for Gravity Structures in the Northern North Sea, Ove Eide and Knut H. Andersen
Guidelines for milling thin ribs with high speed machining, Regina Marie Daugherty
Guidelines for Sealing Geotechnical Exploratory Holes, Cameran Mirza and Robert K. Barrett
Guidelines for the ground vibration testing of aircraft structures with free play nonlinearities, William Brian Hayes
HAART drugs induce oxidative stress and mitochondrial dysfunction in blood-brain barrier, Kalyan Reddy Manda
Hair detection in clinical and dermatoscopy images, Mohammed Raffi
Hall effect measurements of the net ionic mobility in NaCl, NaBr and NaI, Suman Kumar Hukku
Hall-effect thruster surface properties investigation, David George Zidar
Halogenated epoxide-phenol reactions A mechanism study, Richard L. Rowton
Handel's Maser-Solution Theory of ball lightning: the creation of stable three-dimensional cavitons by an atmospheric maser with an open resonator, Glenn Andrew Carlson
Hardened concrete properties and durability assessment of high volume fly ash concrete, Kyle Marie Marlay
Hardened mechanical properties and durability performance of specialized concretes, Kyle Richard Holman
Hard-switched switched capacitor converter design, Lukas Konstantin Müller
Hardware and software design of an unlimited vocabulary microprocessor based speech synthesizer/, Biven Liu
Hardware design of a data acquisition card and software routines for stepper motor controlled needle valves of a membrane tester, Yahya Mohammad Khawaja
Hardware emulation of wireless communication fading channels, Fei Ren
Hardware implementation of a closed-loop controller for torque ripple sensing and vibration mitigation, Philip Beccue
Hardware implementation of multiple-input multiple-output transceiver for wireless communication, Bing Han
Hardware integration of ultracapacitor based energy storage to provide grid support and to improve power quality of the distribution grid, Deepak Somayajula
Harmonic compensation in a grid using doubly fed induction generators, Omkar Amol Ghatpande
Harris Hall, Missouri University of Science and Technology
Hazardous Waste Disposal Site Hydrogeologic Characterization, S. M. Testa
Hazards assessment of St. Charles County - earthquakes and floods, Amy Lynn Krauch
Health hazard component analysis of appropriate technology, T. M. Tanzeer Ahmed
Health monitoring of adhesively bonded composite patch repair of aircraft structures using wavelet analysis of lamb wave signals, Rabindranath Gubbala
Health of Ammonia Horton Spheres and Foundations – A Case History, Gopal Ranjan, S. K. Kaushik, and V. K. Gupta
Heat and mass transfer in the gas metal arc welding process, Junling Hu
Heat and mass transfer in the sand mold and their effects on casting carburization and solidification during the evaporative pattern process, Saman Sunil Shantha Abayarathna
Heat flow in a two-dimensional steady-flow system without radial symmetry, George H. Parharoglu
Heat flow in the Boss deposit of Missouri, Don Stainbrook
Heat of formation of slags, George P. Woodhall and Walter Adams Luther
Heats of solution of amines into alcohols and inert solvents., Ronnie Dean Widner
Heat transfer and bubble dynamics in bubble and slurry bubble columns with internals for Fischer-Tropsch synthesis of clean alternative fuels and chemicals, Moses Odongo O. Kagumba
Heat transfer and instability of natural convection flow on inclined flat plates, Hwa-Chong Tien
Heat transfer and wave instability of mixed forced and free convection flow, Aleksandros Mucoglu
Heat transfer augmentation in rectangular ducts due to passive flow destabilization, James Jackson Tinsley
Heat transfer coefficient of paint films, Richard F. Justus
Heat transfer coefficients across bonds and contacts, Eugene Charles Fadler
Heat transfer coefficients in artificially roughened pipes, Mehmet Hayati Turan
Heat transfer in a vortex flow metal to air, Elisha Rachovitsky
Heat transfer, mass transfer, and vortex instability of buoyancy-affected boundary-layer flows over inclined surfaces., Keh-Lih Tzuoo
Heat transfer of a high Prandtl number oil in laminar flow, John Robert Lee III
Heat transfer through a honeycomb sandwich panel, Jayantilal J. Darji
Heat transfer through a spherical gas shell, Adel Nassif Saad
Heavy and alkali metal content of surface and ground waters in the Joplin area, Missouri., Edwin Joseph Garrison
Heavy Crane Foundations on Soft Clay, John R. Davie, Kenneth R. Bell, Mark B. Fitzsimmons, and Daniel A. Haggerty
Heavy metal analysis of stream sediments in the James River Basin, Missouri, William J. Head
Heavy metal bioavailability in mine drainage-receiving constructed wetland plants, Cem Selman
Heavy metal concentrations in the waters of the Springfield Area, Missouri, Anita Louise Williams
Heavy metal contamination in soil around a lead smelter in Southeast Missouri., David Lewis Butherus
Heavy metal content of stream media upper Current River Basin, Missouri., Terry Lee Panhorst
Heavy metal patterns in Big and Aux Vases River drainage Rolla 1⁰ X 2⁰ Quadrangle, Missouri, Behzad Afzali
Heavy metals in the main streams of the James River Basin, Missouri, Richard Jerome Lance
Heavy metal transport processes in the Black River of Missouri's New Lead Belt, Anne M. Faeth
Heavy minerals in the Roubidoux and other sandstones of the Ozark Region (MO.), Cletus Daniel Cordry
Helical force flow: a new engineering mechanics model for biological materials, Jeffery S. Thomas
Hermetic welding of polymeric films with a carbon dioxide laser, Kevin Kwanghyon Park
HET-CAM for the identification of ocular irritancy in seawater/salt water sources, Alexander Clovis Winters
Heuristic algorithms for the generalized vehicle dispatch problem, Leland Ray Miller
Heuristic coloring algorithms for the composite graph coloring problem, Johnnie Curtis Roberts
Hexaaza macrocyclic complexes containing biimidazole, Samir Saad Kandil
Hierarchical fingerprint identification based on an unsupervised neural network model, Ahmet Murat Ozbayoglu
Hierarchical group digital signatures, Natraj Lakshminarasimhan
Hierarchical motion estimation using wavelet transforms, Siddharth Budhraja
Hierarchical multiresolutional optimal control systems, Anand Dasgupta
High density serial encoded tape systems., Billy J. Romine
Higher order finite element modeling of acoustic propagation in a moving medium, Eivind Listerud
Higher space mode analysis of a large cylindrical pulsed H₂O system, Harold David Hollis
High frequency ferroelectric properties of the BiFeO₃-PbTiO₃-PbZrO₃ ternary system, Robert Travis Smith
HIGHLAND: a graph-based parallel processing environment for heterogeneous local area networks, Douglas E. Meyer
Highlights of New ASCE Standard on Composite Slabs, Max L. Porter
High order bang bang control system., Shing-Chou Pi
High-order neural networks for computing, Lingzhi Guo
High pressure jet pump conveyance optimization, Michael David Mann
High pressure kinetic study of the catalytic decomposition of ethyl diazoacetate, William Lyle Pulse
High pressure liquid chromatographic method for the screening EPA priority organic pollutants in Southern Missouri streams and rivers., Craig Michael Ratkey
High pressure steam-co corrosion of high alumina castables., Kenneth William Wistrom
High pressure water jet cutting of rock, Richard Lee Henry
High pressure water jets in rock excavation, Jianchi Yao
High resolution 3D microwave and millimeter wave imaging, Rajesh Koganti
High resolution distance monitoring system using laser light, Blake R. Gray
High resolution shallow reflection seismic studies along the commerce geophysical lineament in the Benton Hills of southeast Missouri, Anthony Edward Shaw
High-resolution ultrasonic thickness measurement using the chirp z-transform, David Joseph Bytnar
High-rise Rack-supported Building a Unique Application of Cold-formed Steel Members, Ching Fung
High-speed machining of thin-walled structures, Chau Nguyen
High speed magnetically supported vehicles for reducing transportation's degradations of the environment, Pravinchandra Shukla
High speed steel - its history, development, manfacture, metallography, and constitution, including an extended bibliography, James Presley Gill
High Strength Steel Members with Unstiffened Compression Elements, Lan-Cheng Pan and Wei-wen Yu
High temperature compressive creep in mullite, Peter C. Smith
High temperature compressive creep of olivine refractories, Suchinda Chotipanich
High temperature oxidation of nickel, Virgil R. Friebel
High temperature tolerant optical fiber inline microsensors by laser fabrication, Tao Wei
High thermal expansion phosphorus oxide and oxynitride glasses, Yongren B. Peng
Highway bridge design and construction in Missouri, James Lingan Pasley
Highway bridges, design and cost, John Edward Kirkham
Highway construction and maintenance equipment with machine and automotive repair shops for the reconstruction of the highways of the IV division, Ankara, Turkey, Steve Theodorides
Highway Interchange Constructed With Slurry Walls, E. Itzig Heine, Frank A. McDonough, and Surinder Singh
Hilbert Transform applications in signal analysis and non-parametric identification of linear and nonlinear systems, Zuocai Wang
Historical review and economic analysis of federally generated hydroelectric power in the United States : an analysis of the "preference clause" and cost based rates, Thomas Girard Borowiak
History of Tehri Rockfill Dam Design, Bhagwat V. K. Lavania
Hollow fiber membrane biofiltration for removal of gaseous VOCs, Bo Zhang
Holomorphic extensions in toric varieties, Malgorzata Aneta Marciniak
Homogeneous nucleation of ethanol in argon using an expansion cloud chamber., Gregg Wesley Adams
Homogeneous nucleation of nonane in argon using an expansion cloud chamber, Gregg Wesley Adams
Homogeneous nucleation of water vapor in inert gas atmospheres, Arthur Henry Biermann
Homogenization effects on neutron flux Monte Carlo calculations for an accelerator driven system, Jamie Marlene Ferrero
Hopfield and modified Hopfield neural network based parameter estimation and control, Zhenning Hu
Horizontal and Vertical Movements of Red Clay Highway Embankments, F. J. Gichaga, F. S. Atibu, and B. K. Sahu
Horizontal pressures on retaining walls due to line surface loads, John B. Heagler
Horizontal wick drains: A testing and design study, James Arnold Liljegren
Hot channel determination and burnup analysis of Missouri University of Science and Technology Research Nuclear Reactor, Kelly Christopher Rogers O'Bryant
How South-West Wisconsin tailing piles can be worked at a profit, Gerald Henry Pett
How to Ensure Quality Construction in Light Steel Framing, Patrick J. Boyd, J. S. Traw, D. R. Wootton, and Calvin Robert Clauer
How we collect the refuse : an analysis of Missouri's solid waste collection system., Glenford A. Newtown
HRVA - a velocity analysis technique for seismic data, John Charles Robinson
Human factors of manufacturing management in Taiwan and mainland China, Chung-Ming Huang
Humanities and Social Sciences Building, Missouri University of Science and Technology
Humanities and Social Sciences Building, Missouri University of Science and Technology
Humanities and Social Sciences Building, Missouri University of Science and Technology
Humanities and Social Sciences Building, Missouri University of Science and Technology
Human systems integration: training and education needs analysis, Hao Zhang
Hybrid CNC rapid prototyping of a titanium 6Al-4V - H13 tool steel functionally gradient material by using the Taguchi method and a possible application, Joseph Hogan Bradley
Hybrid damper-actuator system with optimum observer-controller for seismic-resistant structures, Hongping Jiang
Hybrid data mining technique for application in geo-chemical data analysis, Shipra Dutta
Hybridizing and applying computational intelligence techniques, Jeffery Scott Shelburg
Hybrid key management and secure routing protocols for wireless sensor networks, Timothy J. Landstra
Hybrid numerical electromagnetic modeling techniques for analyzing printed circuit board geometries, Chunlei Guo
Hybrid radar waveform design utilizing complementary phase coding and linear frequency stepping for achieving improved slant range resolution in a synthetic aperture radar, Daniel Bernard Koch
Hybrid sensor networks for hydrological monitoring, Thomas V. Freiberger
Hybrid simulation of underground trackless equipment, Louis Pierre Gignac
Hybrid Wood and Steel Sole Plate Connection Walls to Floors Testing Report, NAHB Research Center, Inc.
Hydraulic air compressors, Euart Carl Torrence
Hydraulic fracturing experiments to investigate circulation losses, Maximiliano Liberman
Hydraulic mining, Arthur Neustaedter
Hydraulic scale for measurement of dynamometer and other forces, John Richard Barton
Hydraulic separation, Albert Edwin Eardley and John Simpson Cameron
Hydraulic transients in pipe networks-analysis and control., Michael John Kinsella
Hydraulic transportation of coal in open flumes., Nallapu Narayan Reddy
Hydrocarbon vapor measurement in two-phase flows by infrared extinction, Thomas Patrick Billings
Hydrodynamic mixing model applied to a continuous stirred-tank reactor with and without second-order reaction, Leon L. Otte
Hydro-electric treatment of Joplin-Miami zinc concentrate, David Francis Walsh
Hydrogen absorption and corrosion studies of zone-refined iron, Chang Don Kim
Hydrogen applications for Lambert - St. Louis International Airport, Mathew Thomas
Hydrogen desorption characteristics of galvanized steels and indium-cadmium shape memory alloys, Mark S. Geissler
Hydrogen embrittlement of PH13-8Mo stainless steel., Dale R. McIntyre
Hydrogen infrastructure: resource evaluation and capacity modeling, Kevin B. Martin
Hydrogen overvoltage on titanium, Sheng-Tai Shih
Hydrogeological characterization and water-use risk evaluation along a pipeline corridor in southern Missouri, Jeffrey Dewitt. Young
Hydrogeology of reservoir sites in the Meramec River basin, Missouri., John H. Anderson
Hydrologic and dye trace study of Welch Spring, Missouri, Anne Elizabeth Keller
Hydrologic characteristics of shallow bedrock aquifers in the vicinity of Norman Creek, central Phelps County, Missouri, Michael A. Nawrocki
Hydrologic transport of uncontrolled hazardous wastes from Sac River-Fulbright landfills, Springfield, Missouri, Robert William Garrido
Hydrology of small drainage areas, James Kinchen Searcy
Hydrolysis of cellulosic materials with concentrated acid, Chienchung Shih
Hydrometallurgical treatment of lead blast furnace slag, Upal Roy
Hydrostatic extrusion of tubular products, John Lester Roth
Hydrostatic extrusion of waste glass and plastic, Subhash Govind Kelkar
Hydrostatic Pressure at a Soil-Structure Interface, R. Craig Findlay
Hydrothermal alteration of ash-flow tuffs in the Indian Peak District of southwestern Utah, Michael Allan Tolley
Hydrothermal deposition of barium titanate heteroepitaxial thin films, Sandeep K. Patil
Hydrothermal deposition of hydroxyapatite particles and coatings, Haobo Pan
Hydro-thermal generation unit commitment and dispatch using a dynamic programming approach, Warren Dean Graham
Hydrothermal synthesis and stabilization of nanocrystalline cerium (IV) oxide, Shahid G. Lakhwani
Hydrothermal synthesis of barium titanate particles and heteroepitaxial thin films, Emin Ciftci
Hydroxyapatite formation on a silicate and borate glass, Joshua Adam Wojcik
Hygrothermal modeling and testing of polymers and polymer matrix composites, Weiqun Xu
Hypersonic vehicle trajectory optimization using neural networks, Jonathan Richard Grohs
Hysteresis loss of supermalloy at different temperatures, Chester Ray Holland
Hysteresis rules of perforated low-rise reinforced concrete shear walls and seismic design parameters assessment of buildings, Jing-Shyang Yang
IDDAP -- Interactive computer assistance for creative digital design, Richard Franklin Crall
Ideal filter approximation and synthesis, Patrick Shu Yau Ho
Identification and characterization of acyl-homoserine lactone signaling molecules produced by varying strains of Bradyrhizobium japonicum, Jason C. Elrod
Identification and characterization of complex dynamic structure in spark ignition engines, Robert M. Wagner
Identification and control of smart structural systems utilizing multiple distributed sensors, Robert K. Butler
Identification and robust control of smart structures using neural networks, Rajendra Ratnakant Damle
Identification of centers of influence for urban areas, Robert W. Meyer
Identification of character non-independence in phylogenetic data using data mining and neural network techniques, Venkat Ram Ghatti
Identification of character non-independence in phylogenetic data using parallelized rule induction from coverings, Bhagyesh Babubhai Patel
Identification of decomposition products of tropyl azide and interaction of tropylium ion with nucleophiles, James Joseph Ward
Identification of linear systems with delay via a learning model, Hugh Francis Spence
Identification of multiples by offset panels, Mahmoud Hisham Gaber
Identification of Potential Seepage Locations Along the Herbert Hoover Dike, Lake Okeechobee FL., by Electromagnetic Geophysical Method. Prediction and Confirmation., Anthony L. DiPiero, Robert Ross, Samuel R. Honeycutt, and Richard D. Lewis
Identification of radial streaming and pseudopods in dermoscopy images, Sayali Prabhakar Deshpande
Identification of seismically-induced landslippage along Crowley's Ridge, southeast Missouri and northeast Arkansas, Briget Claire Doyle
Identification of starry milia-like cysts in seborrheic keratoses and malignant melanomas using image processing techniques, Viswanaath Subramanian
Identification of vehicle transfer functions., David Clinton Hollocher
Identifying and overcoming the barriers to sustainable construction, Cristin Szydlik
Identifying multiple steady states in the design of reactive distillation processes, Thomas Karl Mills
Identifying the retained portion of an equivalent network using distribution factor sorting, David Allan Whiteley
Ignition time lag: a measure of explosive energy release, Paul H. Rydlund
IICADS--integrated interactive computer aided design system, Archie Golden Lambert
ILLICON Analysis of Ellingsrud Test Fill, G. Mesri, D. O. K. Lo, and K. Karlsrud
Illustrative examples based on the ASCE standard specification for the design of cold-formed stainless steel structural members, Shin-Hua Lin, Wei-wen Yu, and Theodore V. Galambos
Image analysis techniques for characterizing disc space narrowing in cervical vertebra interfaces, Pavan Chamarthy
Image analysis techniques for vertebra anomaly detection in X-ray images, Mohammed Das
Image and graphics rendering for augmented reality, Kaushal Shah
Image based synthesis for airborne minefield data, Thandava Krishna Edara
Image compression using multiresolution fractal coding, Daniel Richard Cannon
Image detection in signal dependent noise., Robert D. Laramore
Image metric study, Denzil Jewarld Radford
Imaginary functions, Floyd Davis
Imaging in karst terrain using electrical resistivity tomography, Iana Muchaidze
Imaging the subsurface in karst terrain using electrical resistivity tomography, Evgeniy V. Torgashov
Immersed finite element method for interface problems with algebraic multigrid solver, Wenqiang Feng
Immobilization of radioactive materials in iron phosphate glass, Melissa G. Mesko
Immunoadsorption of beta-galactosidase on immobilized anti-beta-galactosidase monoclonal antibody in a finite bath, James Elmer Coons
Immunology based methodology for detecting and searching anomalies, Adarsh Gopinathan Nair
Impact effects of explosively formed projectiles on normal and high strength concrete, Laurin Ashley Bookout
Impact energy coupling and impact seismic refraction using electronic timing, Roderick D. Carroll
Impacting co-worker trust toward persons with disabilities, Holly Rose Bentley
Impact Loading of Thin-walled Beams, Edward A. Zanoni and Charles G. Culver
Impact Loading of Thin-walled Columns, Nishikant R. Vaidya and Charles G. Culver
Impact of ammonia on the leaching characteristics of mercury from coal fly ash, Harmanjit Mallhi
Impact of a proposed expansion at Fort Leonard Wood on Waynesville and St. Robert, Missouri., Frazer Robert Lockhart
Impact of channel statistics and correlation on underwater acoustic communication systems, Jesse Scott Cross
Impact of combustion phasing on energy and availability distributions of an internal combustion engine, Shawn Nicholas Wildhaber
Impact of fracture spacing and mechanical parameter anisotropy on fracture width in horizontal wells in shales, Deepak Gokaraju
Impact of hydrocarbon biodegradation on low frequency electrical properties of unconsolidated sediments, Gamal Z. Abdal Aal
Impact of interruptions in white collar working environment, Zafar Akhil Khan
Impact of management status, gender, and level of project involvement on corporate governance in a role-based enterprise portal environment, Daniel Augusto Pereira Brás Sequeira
Impact of plug-in hybrid electric vehicles on the power grid in a smart environment, Zahra Darabi
Impact of port fuel injection on engine performance, Michael David Wene
Impact of processing parameters on spray deposition of a cerium-based conversion coating on Al 2024-T3, Philip Scott Jones
Impact of reliability information sharing on operational aspects of a supply chain, David C. Hall
Impact of segmented ground planes in printed wire boards on inductance and electromagnetic interference, R. Lee Hill
Impact of social structure on team performance and rate of network change, Dale Allan Spence
Impact of stochastic loads and generations on power system transient stability, Theresa Odun-Ayo
Impact of Tunneling on Two Brick-Bearing-Wall Structures, Marco D. Boscardin
Impacts of acid mine drainage on carbon cycling in receiving streams, Ernest W. Fonyuy
Impacts of ozonation on the adsorption and surface characteristics of powdered activated carbon, Arshita Cheeti
Impacts of tailings from abandoned lead mines on the water quality and sediments of Flat River Creek and Big River in Southeastern Missouri, Larry Edward Elliott
Impacts of urbanization on stream stability, Shweta Vyas
Impact strain detection in fiber optic-based smart composite structure, Pojamarn Pojanasomboon
Imperfections in a silicon crystal studied by the x-ray and density method, Pierre Borgeaud
Imperfections in the Ag-In system (alpha-phase) and lattice parameters of cadmium oxide, Prafulla Maganlal Vora
Imperfections within Ti₂O₃ and TiO₂ phases in the titanium-oxygen system, Tatsuhiko Ejima
Implementation an an ATM/PPP traffic generator and analyzer using an FPGA, Jagdeep Singh
Implementation and evaluation of spatial audio recording and rendering techniques, Jayasecha Raghavendra Nimmala
Implementation and validation of adaptive-critic based optimal neuro-controller on a multi-input multi-output system, Vijayakumar Janardhan
Implementation issues of distributed coaxial cable crack sensors embedded in reinforced concrete members, Michael A. Brower
Implementation of a CIM strategy for automated manufacturing and assembly, Merwan Burjor Mehta
Implementation of a computer based automated time and attendance data taking and tracking system at McDonnell Aircraft / by Dwayne Blakemore., Dwayne Blakemore
Implementation of adaptive noise canceller using field programmable gate arrays, Bonita Bhaskaran
Implementation of an embedded neural network-based output-feedback controller for spark ignition engines, Jonathan B. Vance
Implementation of an embedded star network, Pankaj Tandon
Implementation of a variable bandwidth digital bandpass filter, Marlin D. Knabach
Implementation of camera calibration techniques for vision-based metrology in a rapid prototyping environment, William Christopher Walton
Implementation of digital controllers for smart structures using field programmable gate arrays, Jamie Scott Kelly
Implementation of integrated function structure and object-oriented design framework, Qiong Gao
Implementation of low-complexity suboptimal turbo decoders using greedy algorithms, Venkat Mandagulathur Pattabhiraman
Implementation of manufacturing system simulation in conjunction with a design-of-experiments study, Neil Marco Bacoski
Implementation of programmable logic cell arrays in the design of a hard disk controller system, Mouhammad Hazem Tabba
Implementation of project based learning technique to enhance engineering education, Dinesh Kanigolla
Implementation of recursive algorithms for delay-time estimation using the fast Walsh transform, Donald Robert Nelson
Implementation of Remedial Measures to Contain a PCB Spill, M. D. Huag, J. Atwater, R. B. Knight, P. Kozicki, and A. Lissey
Implementation of surface impedance boundary condition in FDTD and incorporating EMI from traces crossing the gaps in the ground plane into SPICE, Sunitha Chandra
Implementation of the finite element method in a nodal transport program to allow for heterogeneous geometries, Micheal Addison Smith
Implementing a combined historical and operational data store utilizing data replication services and dynamic temporal fragments, James Kiemel Brake
Implementing an MRP system in a job shop environment, Kathleen A. Behnke
Implementing frequency regulation capability in a solar photovoltaic power plant, Venkata Ajay Kumar Pappu
Implementing ISO 9001 at an automotive supplier's facility, Alice Brigid Beechner
Implementing NPI; new product introduction at Lincoln Automotive, James Constantine Vintzel
Implementing simultaneous engineering and its pitfalls, James Charles Diez
Implementing statistical energy analysis in the development and functions of product design for distribution packaging, Robert Harlan Clarke
Improved communication system design using object-oriented techniques / by John Francis Broker., John Francis Broker
Improved control strategies for effective ventilation with variable air volume systems, William Woody Delp
Improved finite element modeling of the turbofan engine inlet radiation problem, Indranil Danda Roy
Improved parallel algorithms for molecular dynamics simulations, Ravi A. Murty
Improved phase shedding technique in a multiphase converter system, Anagha Rayachoti
Improvement in target detection with a frequency agile pulsed non-coherent radar, Kenneth Lee Horn
Improvement of a Dumped Rockfill Foundation by Dynamic Consolidation, Adrian Wightman and Nelson F. Beaton
Improvement of a graphical well test analysis personal computer package, Patrick Joseph Wagner
Improvement of management staff productivity in large project organizations., Robert R. Cole
Improvement of Mechanical Properties of Soft Soils by Use of a Pre-Loading Embankment, F. Colleselli, P. Simonini, and M. Soranzo
Improvement of power quality in VSI drives, Ravi Bantu
Improvement of the electrical failure analysis system used by AlliedSignal Aerospace Kansas City Division, Daryl Ralph Brunswick
Improvement of the hydration resistance of magnesia and doloma using organosilicon compounds, Sergio Luiz Cabral da Silva
Improvement of the testability of bit serial array processors using Multiple Input Signature Registers, Vinod George John
Improving high-dimensional indexing for content-based image retrieval, Jui-Che Teng
Improving life cycle management plans for power plant components, Srinath Raghavan
Improving manufacturing aspects and design methods for product portfolios, Robert L. Jordan Jr.
Improving medical ultrasound images using real-time image processing techniques, Timothy Lee Blankenship
Improving plasma actuator performance at low pressure, and an analysis of the pointing capabilities of cubesats using plasmonic force propulsion (PFP) thrusters, Paul Daniel Friz
Improving railroad "less-than-car-load" freight by the use of containers and container cars, Kenneth Walter Schoeneberg
Improving resiliency using graph based evolutionary algorithms, Jayakanth Jayachandran
Improving student learning outcomes through personal response systems (clickers), Ran Cai
Improving the accuracy of the orientation parameters in surface fitting by boundary sampling strategy, Jinglei Wang
Improving the oxidation resistance of diboride-based ceramics, Maryam Kazemzadeh Dehdashti
Improving the thermal shock resistance of silicon carbide ceramics, Andrew A. Buchheit
Improving the thermal shock resistance of zirconium diboride ceramics, James W. Zimmermann
Improvised explosive device crater repair for enduring route remediation, Daniel Roman Kienitz
Impulse breakdown characteristics of covered cylinders in SF₆ and SF₆-gas mixtures, Mohamed Ali Abdellah
Impulse noise concealment in NTSC receivers, Roger Allen Younger
Impulse response of RC exponential lines, Oscar Gojon
Impulsive loading of metals and alloys, William Barnes McLane
Incipient continental rifting: insights from the Okavango Rift Zone, northwestern Botswana, Baraka D. Kinabo
Inclusion modification in steel castings using automated inclusion analysis, Vintee Singh
Inclusion theorems for boundary value problems for delay differential equations, Leon M. Hall
Incorporating new technology into healthcare: an analysis of performance, acceptance, and safety, Anthony Joseph Strawhun
Incorporation of evidences in an intelligent argumentation network for collaborative engineering design, Ekta Khudkhudia
Incorporation of rice hull derived silica in epoxy composites and evaluation of their mechanical properties, Narayan Sreenivasan
Incorporation of solid charge into a molten metal bath in a plasma furnace, Won Hyung Rhee
Increased aluminum use and its impact on the life cycle energy cost of automobiles., Semahat (Dengi) Sinharoy
Increased stripper well recovery by means of high voltage electrical heating, John Curtin Schratwieser
Increase of heat transfer to reduce build time in rapid freeze prototyping, Sriram P. Isanaka
Incremental learning of numeric clusters in classifier systems, Keith Robert Hacke
Independent particle model relativistic correction factors for isotope shift, Ismail Sinan Ozkal
Independent session/image transport protocol for the fiber distributed data interface (FDDI), Glenn Edward Niemeyer
Indexing in multimedia databases, Rajesh Vilas Sonak
India's First Venture Relating to Subsurface Drainage by Horizontal Drains, T. K. Natarajan, A. V. S. R. Murty, and Deep Chandra
Indication of cylinder pressure rise rate by means of vibration and acoustic emissions of an internal combustion engine, Jeffery A. Massey
Indirect adaptive neurocontrol of a unified power flow controller, Radha P. Kalyani
Indirect tensile test correlative study, Thomas Joseph Abkemeier
Individual-based artificial ecosystems for design and optimization, Shivakar Vulli
Indoor air quality: economizer control and air mixing in variable air volume systems, Roger George
Indoor mass transfer coefficient measurements of ozone using nitrite-coated filters, Ping Zhao
Induced polarization/electrical resistivity study of sanitary landfill located in collapsed sink structure, Clifford Wade Bishop
Inductance modeling and extraction in EMC applications, Clint Matthew Patton
Inductances and capacitances for a distribution transformer, Jesse Paul Schmeller
Industrialized Housing with Cold-formed Sheet-steel Elements, J. O. Bats and J. F. G. Janssen
Industrial simulation with animation, Edward Telley Hammerand
Inelastic Buckling of Thin-Walled Members, S. Rajasekaran and D. W. Murray
Inelastic Flexural Stability of Corrugations, Raymond L. Cary
Inelastic Performance of Screw Connected CFS Strap Braced Walls, Kostadin Velchev and Colin A. Rogers
Inelastic Performance of Welded CFS Strap Braced Walls, Giles Comeau
Inelastic reserve capacity of cold-formed beams with stiffened compression elements, Hans Peter Reck, George Winter, and Teoman Peköz
Inelastic response and collapse behavior of steel tall buildings subjected to 3-D earthquake excitations, Jeng-Fuh Ger
Inelastic Torsional-flexural Buckling of Cold-formed Open Section under Eccentric Load, Jang Dejin and Chen Shaofan
Inertial navigation performance improvement realized by the technique of interrupted alignment, Ralph E. Herndon
Inferences on the parameters of the Weibull distribution, Darrel Ray Thoman
Inferences on the shape parameter of the gamma distribution and Cramer-Rao lower bounds from censored data, James Wyckoff
Infiltrated composite electrodes for solid oxide fuel cells, Aligul Buyukaksoy
Infinite beams on an elastic foundation, Shi-peing Chang
Influence of ductility on the structural behavior of cold-formed steel members, George Winter and A. K. Dhalla
Influence of ductility on the structural behavior of light-gage cold-formed steel members, A. K. Dhalla, George Winter, and S. J. Errera
Influence of film thickness on the performance of solid lubricants, Sunil Vishwanath Mahale
Influence of flow baffles on mixing of two air streams flowing in a mixing chamber with dissimilar temperatures: A computational study, Abdulmunam Salem Shaban
Influence of initial turbulence intensity on the heat and moisture transfer through a recirculated air curtain, Nguyen Quang Van
Influence of Manufacturing Technology on Cold Formed Structural Members, George T. Halmos
Influence of microstructural length scale on deformation behavior of magnesium alloys, Wei Yuan
Influence of multiple spin exchange on ferromagnetic systems, Christopher Jay Mertens
Influence of nobler metal salt additions upon the dissolution rate of aluminum in hydrofluoric acid, Barry L. Basden
Influence of nonlinear bearing support stiffness on the convergence of computerized dynamic balancing., Neal Alan Shearer
Influence of oxygen activity on the lattice parameters and thermal expansion of Mg and Sr-doped LaCrO₃, Sutham Srilomsak
Influence of particle size and specimen preparation on the Iowa Pore Index, Christopher Paul Davis
Influence of Pile Driving on Characteristics of Liquefiable Soils, Qiao Taiping and Liu Huishan
Influence of porosity on the fracture stresses of electrical porcelain., Edward Anton Snajdr
Influence of prior deformation on structure and properties of heat treated aluminum casting alloy, Chungwei Hsia
Influence of process parameters on laser aided manufacturing process (LAMP), Mallareddy Bhimanapati
Influence of quartz particle size and concentration on the fracture stresses of triaxial alumina porcelain., John David Weyand
Influence of S-nitrosylation on muscarinic acetylcholine receptors, Pradnya Pandurang Patil
Influence of some interstitial materials on the thermal contact conductance, Jin-Tyan Lin
Influence of some metals on the rate of corrosion and deposition of titanium in molten salt baths, Yu-Pu Huang
Influence of strain rate on the mechanical properties of sheet steels and structural performance of cold-formed steel members, Chi-Ling Pan
Influence of temperature and microstructural modification on formability of magnesium alloys, Arun Mohan
Influence of the heat release on thermodynamic characteristics of diesel engines., Shirish Amritlal Desai
Influence of time and temperature in the roasting of sulphides, Roger Hanson Hatchett
Influence of turbidity on the stratification development of a deep water reservoir., David Allen Prouty
Influences of cutting factors and nozzle design on abrasive water jet cutting performance, Rawinkhan Srinon
Informal risk capital in Missouri, Michael David Moline
Information archival and reuse: drawing conclusions from the past, Matt R. Bohm
Information flow properties for cyber-physical systems, Rav Akella
Information management systems for high-technology organizations., Katherine Ann Sewell
Information models for batch and real time chemical process data, Arvind Chandrasekhar Sharma
Information processing using laser speckle, Rathnakar Gopisetty
Information theoretic analysis and design of passive wireless backscatter sensor networks, Aditya V. Padaki
Infrared cooling near atmospheric temperature inversions and absorber concentration variations, Joey Keith Tuttle
Infrared modulation using the field-effect properties of germanium., Lloyd E. Brunkhorst
Infrared related solid state studies, Donald George Rathbun
Infrared signatures of jet engine exhaust plumes, Edward Tucker
Infrared spectra and magnetic properties of fluorine substituted copper (II) alkanoates, Jose G. Rodriguez
Inherent and model-form uncertainty analysis for CFD simulation of synthetic jet actuators, Daoru Frank Han
Inherently safer analysis of the attainable region process for the adiabatic oxidation of sulfur dioxide, Venkata Udaya Bhaskar Challagulla
Initial operation and calibration of the UMR supersonic axisymmetric wind tunnel, James Riley Murphy
Initial surface reactions and nucleation kinetics of boron on atomically clean molybdenum substrates, Richard Eugene Moore
Injection of a super-saturated acetate solution to determine its viability as a bio-remediation option, Michael Eugene Stewart
Inkjet deposition of ceramic particles for thin-film and field abatement applications, Jason Guy Bodson
Innovative air breathing design and output control for portable proton exchange membrane fuel cell, Amar Bala Sridhar
Innovative approaches to characterize DC power distribution systems in high speed PCB design, Lin Zhang
Innovative concrete bridging systems for pedestrian bridges: Implementation and monitoring, Kurt Edward Bloch
Innovative Damage Control Systems Using Replaceable Energy Dissipating Steel Fuses for Cold-formed Steel Structures, Fuminobu Ozaki, Yoshimichi Kawai, Hiroshi Tanaka, Tadayoshi Okada, and Ryoichi Kanno
Innovative Designs with Cold-formed Members and Sheets, Richard L. Tomasetti
Innovative refractories for preventing nozzle clogging in continuously cast aluminum-killed steels, Robert B. Tuttle
Innovative solutions in bridge construction, rehabilitation, and structural health monitoring, Fabio Matta
In-plane behavior of strengthened unreinforced masonry infill walls with alternative wood-fiber fly ash material, Yosuke Tanizawa
In planta solid phase sampling devices used in delineating groundwater contaminant plumes, Mikhil Kishore Shetty
Input data pattern encoding for neural net algorithms, Hyeoncheol Kim
In search of the optimal adaptive load sharing policy for distributed systems, Yuh-Jong Hu
Insider attack scenarios and black box testing in support of insider threat detection, Krishna Prasad Balasubramanian
In-Situ Determination of Dynamic Properties of Soil for Foundation of a Turbo-Generator, V. D. Miglani
In-situ monitoring of coal mine floor heave., Michael Joseph Lueckenhoff
"In situ" printed circuit board material extraction procedure with conductor surface roughness study, Amendra Koul
In situ rapid load testing of concrete structures, Matthew Alan Mettemeyer
In situ regeneration of granular activated carbon (GAC) for natural organic matter (NOM) removal, Rohiniben Patel
In Situ Stabilization of Two Industrial Sites by Dynamic Compaction, John F. O'Brien and Charles P. Gupton
Inspection of printed circuit boards using data mining of image features, Swapna Ragini Ayyavari
Inspection point placement and path planning algorithms for automatic CMM inspection, Vijay Andrew Albuquerque
Instability of a crossed shear layer with two velocity components to vortical and to three-dimensional perturbations, Nimesh Y. Shah
Installation and performance evaluation of coaxial cable sensors for crack and corrosion detection, Iana Muchaidze
Instructing the software systems development capstone experience: balancing professional development, communication, and engineering, Matt Buechler
Instrumentation, Monitoring and Analysis of a Landslide − A Case Study, Kishor Kumar and R. K. Panigrahi
Instrumentation of a diesel engine for measuring cylinder head temperature, and pressure at various crank angles, Raman A. Patel
Instrumentation of a Sewer Tunnel in Weak Singapore Soils, K. W. Lo, G. P. Karunaratne, and S. L. Lee
Instrumentation of a shock tube facility, James Everett West
Instrumentation of a smart composite bridge, Martha J. Molander
Insufficient CT data reconstruction based on directional total variation (DTV) regularized maximum likelihood expectation maximization (MLEM) method, Fahima Fahmida Islam
Integrability of the sums of the trigonometric series 1/2 aₒ + ∞ [over] Σ [over] n=1 an cos nΘ and ∞ [over] Σ [over] n=1 an sin nΘ, John William Garrett
Integral representations and holomorphic extension on toric varieties, Alexey Alexandrovich Kytmanov
Integrated chemical-biological treatment for wastewater containing surfactants, John John Kuzhikannil
Integrated circuits switching current modeling, measurement and power delivery network optimization, Kuifeng Hu
Integrated computational intelligence and Japanese candlestick method for short-term financial forecasting, Takenori Kamo
Integrated computer-based structural analysis, Ta-Wei Rong
Integrated design of mechanical components, John Joseph Malyamakkil
Integrated geophysical survey as applied to groundwater exploration, Louise Elizabeth Fraser
Integrated manufacturing system for precision sheet metal tooling, Sunil Chaturvedi
Integrated optimization system for airbag design and modeling by finite element analysis, Honglu Zhang
Integrated packaging system design for advanced developing countries, Özgür Polat
Integrated process planning for a hybrid manufacturing system, Lan Ren
Integrated process planning for a multi-axis hybrid manufacturing system, Jianzhong Ruan
Integrated product and its extended enterprise network design using lean principles, Abhijit K. Choudhury
Integrated product design using game theory and genetic algorithms, James Howard Nelson
Integrated reliable and robust design, Gowrishankar Ravichandran
Integrated scattering of microwaves by small metal spheres, A. L. Merts
Integrated water resources planning applied to the Jordan River Basin, Ali Abdul-Karim Farhat
Integrating an oscilloscope into a general purpose automatic test system, William Charles Bauer
Integrating axiomatic design and robust design, Siva Rama Jagadish Chandra Gupta Tadepalli
Integrating business and systems engineering processes through automation, Jack Kulas
Integrating product and packaging design for manufacturing and distribution: a survey and cases, Ming-Ren Sun
Integration and characterization of an electrical storage system for a hydrogen fuel cell plug-in hybrid electric vehicle, Edward Alexei Anculle Arauco
Integration and test of a refrigerant-based cold-gas propulsion system for small satellites, Ryan Alan Pahl
Integration of a GIS learning system into civil engineering curricula: an evaluation, Basanta Tandon
Integration of artificial intelligence and operations research in production planning, scheduling and control, Tatchapol Poshyanonda
Integration of battery energy storage with flexible AC transmission system devices, Zhiping Yang
Integration of battery energy storage with static synchronous serial compensator, Lingli Zhang
Integration of energy storage components with cascaded H-bridge multilevel converters, Jingsheng Liao
Integration of geophysical methods to determine the location of subsurface objects in Grandview Triange, Kansas City, Missouri, Galih Wisudhandi Agusetiawan
Integration of model-based systems engineering and virtual engineering tools for detailed design, Akshay Kande
Integration of multiple vision systems and toolbox development, Rohit Vijay Bapat
Integration of nanoporous zeolite with optical fiber devices for chemical sensing, Xinwei Lan
Integration of ultra-capacitors in static compensators, Abhishek Singh
Intel 80386SX microprocessor based single board computer CRL386, Rong-Dyi Chen
Intelligent agent based, autonomous real-time structural health monitoring system, Kyle Mitchell
Intelligent computational argumentation for evaluating performance scores in multi-criteria decision making, Rubal Wanchoo
Intelligent control of SmartParks and wind farms in smart grids, Priyam Chakravarty
Intelligent control using recurrent neural networks, Qun Xu
Intelligent energy management and demand-response control for a photovoltaic-battery system, Yang Liu
Intelligent materials selection advisory system in concurrent product and process design, Naveen Krishna
Intelligent optimal control of a grid independent photovoltaic system using adaptive critic designs and fuzzy logic, Richard L. Welch
Intelligent power system operation in an uncertain environment, Yusuf Yare
Intelligent process control in glass container production, Juan Enrique Vidal
Intelligent process planning system with learning capability: a case-based reasoning approach, Hao Yang
Intelligent robotic assembly cell in flexible manufacturing system, Chun-Lin Su
Intelligent staffing and information system, Nookaiah V. Kolluru
Intelligent technical analysis using neural networks and fuzzy logic, Vamsi Krishna Bogullu
Intensional reasoning about knowledge, Oliver Blagoj Popov
Intensity blending of computer image generation-based displays, Elizabeth Scheppler Reidelberger
Intentional islanding and adaptive load shedding to avoid cascading outages, H. Manjari Dola
Interacting stress concentration factors and their effect on fatigue of metallic aerostructures, David Warren Whitley
Interaction buckling of flange, edge stiffener and web of c-sections in bending, Colin A. Rogers and R. M. Schuster
Interaction curve for a beam column., Mahendra Khushalchand Sanghavi
Interaction of a glyceridacid with lipids of the stratum corneum, David Wade Osborne
Interaction of atoms and molecules with intense electric fields, Courtney Ryan Feeler
Interaction of Concentrated Load and Bending, George D. Ratliff Jr.
Interactions between selected pigment producing bacteria isolated from sewage, Leslie Alexander Lakie
Interactions between water and phosphate glasses, Brad C. Tischendorf
Interactions of nucleons: their role in understanding the sun's origin, composition, and source of energy, Cynthia Pearl Bolon
Interactive and dialogue based learning in engineering education, Siddartha Thummuri
Interactive Buckling in Thinwalled Columns, Srinivasan Sridharan and Rafael Benito
Interactive computer simulation of mechanical assemblies considering friction, Puneet Sharma
Interactive computer simulation of mechanical systems, Uday Narendra Pai
Interactive freeform solid modeling with haptic interface, Xiaobo Peng
Interactive goal programming application in capital budgeting in imperfect capital markets, Sha Mokhtari
Interactive graphical circuit analysis., Keith Frederick Keitel
Interactive preprocessor module for a logic level simulation system, Ashok Babubhai Mehta
Interactive redistricting using color computer graphics., John Robert Hock
Interactive spatial information display system for environmental data analysis., Kwok-Wai Hung
Interactive vehicle dispatching: a hybrid approach, Jackie L. Lawrence
Inter-area oscillation damping in large scale power systems with unified power flow controllers, Mahyar Zarghami
Intercept performance of delay and multiply receivers against phase coded radar pulses, Edward Hal Wooldridge
Interface design for a microcomputer to an optical particle counter, Arvind Srinivasan Chakravarti
Interface development for minicomputer and magnetic tape system., Hiroshi Hasegawa
Interface states in GaAs-oxide-metal Schottky diodes, Yen Chang Wu
Interface thermal conductance with metal screens as interstitial material, William Edward Stewart Jr.
Interfacial effects on dielectric properties of polymer-particle nanocomposites, Sasidhar Siddabattuni
Interfacial fracture energy (bonding strength) of laser deposited H13 tool steel on H13 tool steel substrate using four point bend test, Hari Janardanan Nair
Interfacial mobility and the mechanical properties of surface-modified glass/epoxy composites, Wei-Hang Timothy Wang
Interference effects due to projective-target nucleus scattering in single ionization of molecular hydrogen by 75 keV proton impact, Jason S. Alexander
Interference mitigation using distributed power control algorithms for RFID reader networks, Kainan Cha
Interior corrosion of structural steel closed sections, American Iron and Steel Institute
Interior noise in military helicopters, Charles E. Perez Jr.
Intermolecular potential functions for liquid argon and liquid mercury, Richard H. Kerr
Internal friction in manganese copper alloys, William Paul Dixon
Internal friction of ion exchanged Li₂O•Al₂O₃•2SiO₂ glasses, A. Ismail A. Abdel-Latif
Internal friction of mixed-alkali silicate glasses, James E. Shelby
Internal friction of phase separated glasses, Scot Walter Taylor
Internet controlled programmable logic controllers: a look at security, Heather Jolene Rutenkroger
Interoceanic canal projects, Frank W. Wilson
Interpretation of imagery lineations, Logan Creek Area, Southeast Missouri, Gregory Paul Smith
Interpretation of tests on welded light gage steel connections, Mark Shephard, George Winter, and Teoman Peköz
Interpretation of tests on welded light gage steel connections, Mark Shephard, George Winter, and Teoman Peköz
Interrelationship of transverse anchorage and adhesive bond in welded wire reinforcement, Alan Arthur Becker
Interval estimates of bit-error rate of burst error sequences, Krid Dusitsin
Intraframe coding with DPCM and switched interpolation, Brindala Mallappa
Intraframe transform image coding simulation., Hyung-Whan Paik
Intrinsic viscosities of linear polyethylene, Joseph Shing Chiang
Intrinsic workability and metal forming analysis, Hen-Li Henry Chen
Introduction and overview to a multiple sensor, multiple target tracking system, Daniel Dean Thacker
Introduction to the wavelet transform, Mark Andrew Menning
Intrusion detection and public-key cryptography for the Kerberos Authentication System, Ian Trevor Downard
Intrusion detection using fuzzy logic and evolutionary algorithm techniques, Monu Bambroo
Inventory control requirements for utilities versus industry., Wayne Stephen Alexander
Inverse limits of permutation maps, Robbie A. Beane
Inverse limits on [0,1] using sequences of piecewise linear unimodal bonding maps, Brian Edward Raines
Inverse limits with upper semi-continuous set valued bonding functions: an example, Christopher David Jacobsen
Inverses of transfer function matrices, James Theodore Bruening
Inversion to obtain aerosol size distributions from measurements with a differential mobility analyzer., Ponnampalam Balakumar
Inverter design and analysis using multiple reference frame theory, Luke Dale Watson
Investigating fuel film atomization from valve and port surfaces in a spark ignition engine, Matthew R. Evers
Investigating team influences on individual performance in highly interdependent teams, Amanda Lea Milliken
Investigating the effects of internally trapped residuals on the performance of a homogeneous charge compression ignition (HCCI) engine, Aaron David Attebery
Investigating the impact of ambient pressure, air-assist, and fuel volatility on a fuel spray using a two-wavelength laser extinction technique, Keith Alan Luke
Investigating the impact of microbial interactions with geologic media on geophysical properties, Caroline A. Davis
Investigating the output angular acceleration extrema of the planar four bar mechanism, Matthew H. Koebbe
Investigating the source of thermal anomalies in the northern United Arab Emirates (UAE) desert using geophysical methods, Khalid Ahmad
Investigation and analysis of the inverse cycle engine and virtual turbomachinery concepts for high mach number flight, Thomas Winston Scott
Investigation and development of ground water of Chalone Creek, (Pinnacles National Monument, California), Donald Lee Brown
Investigation and optimization of hydroabrasive cutting head design, Louis J. Finucane
Investigation by neutron diffraction utilizing white neutron radiation, Arlen Ray Schade
Investigation into a measurement-parameter-independent application of the modulated scatterer technique (MST) for material dielectric property characterization, Gabriel S. Freiburger
Investigation into the monotonic magnetostriction and magnetic breakdown in cadmium, James Milo Carter
Investigation into the time of travel through a watershed and the effects of precipitation rates and roughness coefficients, Mark Richard Jourdan
Investigation of a binary digital communications system simulation technique., Terry Lee Taylor
Investigation of ablation materials., John Martin Schattyn
Investigation of a high-volume fly ash-wood fiber material subjected to low-velocity impact and blast loads, Matthew E. Tinsley
Investigation of a modulation method and signal processing techniques for digital data transmission in HF channels., Michael Ray Campbell
Investigation of an alternative wood fiber-fly ash material for infill wall systems, Nidhi Joshi
Investigation of an energy absorbing device for passenger safety, Prakash Krishnaswamy
Investigation of a new in-situ method to determine relative permeability, John David Melvin
Investigation of a new type of cloud condensation nuclei counter: the thermal quench chamber, Donald Arthur Hess
Investigation of angiogenic effects of bioactive borate glass microfibers and beads in a rodent model, Richard Jeffrey Watters
Investigation of autocovariance models of images for transform coding, Rahul Mahendra Shah
Investigation of cased wellbore integrity in the Wabamun area sequestration project, Benjamin Lee Weideman
Investigation of Cold-formed Steel-deck-reinforced Concrete Floor Slabs, M. L. Porter and C. E. Ekberg Jr.
Investigation of continuous beams with varying moment of inertia by the method of conjugate points, Russell Arthur Bryant
Investigation of cover spalling in reinforced concrete torsional members, Shakeelahmed Abdul Latif Mhaskar
Investigation of cracking in continuous prestressed concrete I-girder bridges, Danielle Kleinhans Stone
Investigation of current return paths in four printed circuit board configurations, Ge Chang
Investigation of cyclic dispersion under lean fueling and high levels of simulated EGR, Robert Wesley Sutton
Investigation of different approaches to combine cable information and near-field scan data for radiated-field estimation, Keong W. Kam
Investigation of drillstring vibration reduction tools, Mohammed Fayez Al Dushaishi
Investigation of dual-mode spacecraft propulsion by means of ionic liquids, Brian R. Donius
Investigation of economic design procedure for a rigid frame, Richard S. Groner
Investigation of effects of cold forming on mechanical properties, Kenneth W. Karren and George Winter
Investigation of factors influencing erosion of emergency spillways and remedial technology selection, Craig Owen Bartholomew
Investigation of feedback architecture for estimation of time varying delay, Kalpana Shanmugam
Investigation of flow over NACA 0015 airfoil with trailing edge jet, Nora Anyango Okong'o
Investigation of flow rates through a rockfill dam with an internal spillway, Jerry R. Bayless
Investigation of fluids flow behavior in nano-scale channels by using optic imaging system, Qihua Wu
Investigation of free convection heat transfer from an inclined flat plate, Phairojna Sang-Urai
Investigation of FRP materials for bridge construction, Danielle Kleinhans Stone
Investigation of geosteering in non-trivial geological settings, Anuroop Pandey
Investigation of Ground Cracking at the Van Gogh Street School, Granada Hills, California, Gerald Kasman, Marshall Lew, and Paul Elliott
Investigation of hindered-settling ratio of galena and quartz in air, John Sloan Stewart and Ralph Daniel Killian
Investigation of hindered settling ratio of galena, sphalerite and pyrite as compared to quartz in air, Ralph Wilheim Watson and William Danels Clarke
Investigation of hydration susceptibility of MgO doped with oxides in terms of lattice energy, Soon Ho Lee
Investigation of hydrocarbon sources and reduction in small four-stroke spark ignition engines, Kyle R. Koederitz
Investigation of important surface characteristics of a finned tube heat exchanger, Bobby Dale Stafford
Investigation of inflection points as brace points in multi-span purlin roof systems, Michael R. Bryant and Thomas M. Murray
Investigation of inoculant effect on cast iron, Darrell W. Donis
Investigation of Landslides Affecting a Romanian Railway, Ion Stanculescu, Florian Braniste, and Ion Borsaru
Investigation of length changes and warping in thin prestressed pavements, Wilbur D. Stites
Investigation of length changes in prestressed concrete slabs with outside exposures, John Best
Investigation of liquid carryover in the girdler-sulfide process for production of heavy water at the AEC Savannah River Plant, Samuel Clark Allen
Investigation of liquid fuel atomization from intake valve and port surfaces for a spark ignition engine, Kyle R. Koederitz
Investigation of liquid fuel atomization from the intake valve of a port fuel injected engine, Galen B. Wilkinson
Investigation of measures of ill-conditioning., Thomas D. Calton
Investigation of mechanically expanded joints of plate finned-tube heat exchangers, Terry L. Ernest
Investigation of multiple airbags as supplemental restraints in vehicular occupant safety systems, Krishnaprasad Ranganathan
Investigation of N-acetylcysteine isomers as possible radioprotectors, Rachel Neal
Investigation of pattern classification and feature selection of Gaussian processes, Vivek Ramaprasad
Investigation of plastic deformation in prestressed concrete slabs from long time loading, Joe B. Roberts
Investigation of pole tolerances for a four-precision position backtrack method, Jason Paul Schmidt
Investigation of quantum resistor networks for electron wave computing, Diwakar Ramamurthy
Investigation of rapid freeze prototyping and investment casting with ice patterns, Qingbin Liu
Investigation of rock drill bits, George Elmer Abernathy
Investigation of rock slotting by high pressure water jet for use in tunneling, Ahmed Awaad Saie
Investigation of roof shales in Illinois Coal Mines, Peter J. Conroy
Investigation of roof shales performance under variable environmental conditions, Leonard Lee Woolsey
Investigation of selected d¹⁰ metal ions with two aromatic azaheterocycles: 2,2'-bi-1H-imidazole and N,N-(dimethylamino)pyridine, Colin A. Hester
Investigation of selective laser sintering of zirconium diboride parts, Shashwatashish Pattnaik
Investigation of Settlements of a Trunk Road Embankment in Hong Kong, P. L. R. Pang and Y. C. Chan
Investigation of shear-driven liquid film behavior around a sharp corner, Yuping Wang
