Submissions from 1994
The Si-Ta (silicon-tantalum) System, Mark E. Schlesinger
Nature of the Ferroelectric Phase Transition in PbTiO₃, Noam Sicron, Bruce D. Ravel, Yitzhak Yacobi, Edward A. Stern, Fatih Dogan, and John J. Rehr
Diffraction Analysis of HREM Images from a Plasma-Deposited Iron Carbide Film, Harshini Siriwardane, Phil Fraundorf, Oran Allan Pringle, William Joseph James, and Joseph William Newkirk
Fabrication and Characterization of PZT/Thermoplastic Polymer Composites for High-frequency Phased Linear Arrays, Jeffry W. Stevenson, Mary R. Reidmeyer, and Wayne Huebner
Liquid-Mix Synthesis of Oxide Powders and Thin Films using a Starch-Based Polymer, Lone Wen F. Tai and Harlan U. Anderson
Mathematical Modelling of Refining of Stainless Steel in MRPA Converter, C. Vercruyssen, Patrick Wollants, Jef R. Roos, D. G. C. Robertson, and L. Bertels
Effect of Additives on Anomalous Deposition in Zinc-Cobalt Alloy Electrogalvanizing, H. M. Wang and Thomas J. O'Keefe
Silver-palladium Thick-film Conductors, Sea-Fue Wang, Joseph P. Dougherty, Wayne Huebner, and John G. Pepin
Correlation of Wettability and Interfacial Reaction to the Densification and Dielectric Properties of Fluxed-BaTiO₃, Sea-Fue Wang, Wayne Huebner, and Joseph P. Dougherty
Determination of the Kinetics of TiAl₃ Formation from Fine Ti and Al Particles Using Differential Scanning Calorimetry, X. Wang, Hong Yong Sohn, and Mark E. Schlesinger
Rare Earth Aluminosilicate Glasses for in Vivo Radiation Delivery, James E. White and D. E. Day
Effect of Calcia Additions on the Electromechanical Properties of Samarium-Modified Lead Titanate Ceramics, WanRong R. Xue, Peiwen Lu, and Wayne Huebner
SiC Platelet Reinforced Al₂O₃ Composites by Free Sintering of Coated Powders, Xi Yang and M. N. Rahaman
Oxidation Behaviour of Reaction-bonded Alumina Compacts Using an Al₈₈Si₁₂ Alloy Precursor, S. H. Yokota, L. C. De Jonghe, and M. N. Rahaman
On Exergy Losses in AMR Hydrogen Liquefiers, Lifeng Zhang, John W. Sheffield, S. A. Sherif, and T. N. Veziroglu
Performance Analysis of Reciprocating Magnetic Liquefiers, Lifeng Zhang, John W. Sheffield, S. A. Sherif, and T. N. Veziroglu
Submissions from 1993
The Role Of Cathode Macromorphology In Zinc Electrowinning Current Efficiency, H. M. Aros and T. J. O'Keefe
Interfacial Reactions Between Titanium and Borate Glass, Richard K. Brow, Sagnik Saha, and J. I. Goldstein
Solid-state Science And Technology: Synthesis And Characterization Of (CeO2)0.8(SmO1.5)0.2 Thin Films From Polymeric Precursors, C. C. Chen, Harlan U. Anderson, and M. M. Nasrallah
Thermal Contact Conductance Of A Phase-mixed Coating Layer By Transitional Buffering Interface, K. C. Chung, John W. Sheffield, Harry J. Sauer, T. (Thomas) J. O'Keefe, and A. Williams
Transparent Composites of Poly(chlorotrifluoroethylene) Reinforced with Fluorophosphate Glass Fibers, William L. Dechent, Hongy Lin, D. E. Day, and James O. Stoffer
Gamma-Titanium Aluminide Reinforced with A1₂O₃ and TiB₂ Fibers, Darrell C. Dixon and Joseph William Newkirk
Chemical Durability of Y₂O₃-Al₂O₃-SiO₂ Glasses for the in Vivo Delivery of Beta Radiation, Erik M. Erbe and D. E. Day
Effect of Precursor Particle Size on the Densification and Crystallization Behavior of Mullite, William Fahrenholtz, Douglas M. Smith, and Joseph Cesarano
Influence of Cold-Work and Phosphorus Content on Neutron-Induced Swelling of Ternary Fe-Cr-Ni alloys, F.A. Garner, Kazuya Miyahara, Joseph William Newkirk, and Hiroshi Kinoshita
Influence of Details of Reactor History on Microstructural Development during Neutron Irradiation, F.A. Garner, Naoto Sekimura, Martin L. Grossbeck, August M. Ermi, Joseph William Newkirk, Hideo Watanabe, and Michio Kiritani
A Study Of Fatigue Failure In Superalloys Using Positron Annihilation, D. Hoeckelman and Hollis P. Leighly
SiC-whisker-reinforced Al₂O₃ Composites by Free Sintering of Coated Powders, Ching-Li Hu and M. N. Rahaman
Effect of Rigid Inclusions on the Sintering of Mullite Synthesized by Sol-gel Processing, De-Yin Jeng and M. N. Rahaman
Sintering and Crystallization of Mullite Powder Prepared by Sol-gel Processing, De-Yin Jeng and M. N. Rahaman
Inclined-Field Structure, Morphology, and Pinning of the Vortex Lattice in Microtwinned YBa₂Cu₃O₇, Bernhard Keimer, Fatih Dogan, Ilhan A. Aksay, Ross W. Erwin, Jeffrey W. Lynn, and Ayhan Sarikaya
Technology of Iron-carbon Alloys Production with the Use of Production Wastes, Semen Naumovich Lekakh
Analysis of Properties of Iron Castings Produced in Lined Metal Mould, Semen Naumovich Lekakh, A. E. Shishkin, and A. G. Slutskij
Aging Behavior of Optically Transparent Poly (methyl Methacrylate) Composites, Hongy Lin, D. E. Day, and James O. Stoffer
Model for the Temperature Dependent Transmission of Optically Transparent Poly(Methyl Methacrylate) Composites, Hongy Lin, D. E. Day, and James O. Stoffer
Experimental and Theoretical Aspects of Internal Friction Associated with the Melting of Embedded Particles, Ashwani K. Malhotra and David C. Van Aken
Creep Deformation Studies in Directionally Solidified MoSi₂-Mo₅Si₃ Eutectics, D. P. Mason and David C. Van Aken
The Effect of Microstructural Scale on Hardness of MoSi₂-Mo₅Si₃ Eutectics, D. P. Mason and David C. Van Aken
Thermally Stimulated Polarization and DC Conduction in Iron Phosphate Glasses, Andrea Mogus-Milankovic and D. E. Day
Computer Software For Chemical And Extractive Metallurgy Calculations, Arthur E. Morris and James B. Stephenson
Method for Stripping Metals in Solvent Extraction, Thomas J. O'Keefe
Physical and Mechanical Properties of MoSi₂-Er₂Mo₃Si₄ Composites, D. Keith Patrick and David C. Van Aken
Physical Modeling of Interactions between a Top Blown Jet and the Slag/Metal Bath in Steelmaking, Kent D. Peaslee
Physical Modeling of Metal/Slag/Gas Interactions and Reactions in Steelmaking, Kent D. Peaslee, Dhiren Panda, and D. G. C. Robertson
Reaction Sintering of Zinc Ferrite During Constant Rates of Heating, M. N. Rahaman and L. C. De Jonghe
Solid Solution Approach for the Fabrication of Ceramics with High Density and Controlled Microstructure, M. N. Rahaman and Ching-Li Hu
Structure Property Relationships in Core-Shell BaTiO₃-LiF Ceramics, Clive A. Randall, Seafue Wang, D. K. Laubscher, Joseph P. Dougherty, and Wayne Huebner
Lead Titanate Is Not a Classic Case of a Displacive Ferroelectric Phase Transition, Bruce D. Ravel, Edward A. Stern, Yitzhak Yacobi, and Fatih Dogan
A Sampling of Highlights from the EPD Congress 1993, Mark E. Schlesinger
Design Education in Metallurgical and Materials Engineering, Mark E. Schlesinger and Donald E. Mikkola
The Influence of Solution-Model Complexity on Phase Diagram Prediction, Mark E. Schlesinger and Joseph William Newkirk
Errata: The Nb-Si (Niobium-Silicon) System, Mark E. Schlesinger, H. Okamoto, A. B. Gokhale, and R. Abbaschian
The Nb-Si (Niobium-Silicon) System, Mark E. Schlesinger, H. Okamoto, A. B. Gokhale, and R. Abbaschian
Finding Noise-Related Artifacts in Scanned-Probe Microscope Images, Harshini P. Siriwardane, Phil Fraundorf, Lu Fei, William Joseph James, Joseph William Newkirk, and Oran Allan Pringle
Microstructure of Fe₇C₃ Formed at 3000°C by Plasma Enhanced Chemical Vapor Deposition (PECVD), Harshini P. Siriwardane, Phil Fraundorf, Joseph William Newkirk, Oran Allan Pringle, and William Joseph James
A Microstructural Study of Iron Carbides Formed by Plasma-Enhanced Chemical Vapor Deposition (50-800nm Thick), Harshini P. Siriwardane, William Joseph James, Oran Allan Pringle, and Joseph William Newkirk
Defect Structure Of Y1-ycaymno3 And La1-ycaymno3. I. Electrical Properties, J. W. Stevenson, M. M. Nasrallah, Harlan U. Anderson, and Don M. Sparlin
Defect Structure Of Y1-ycaymno3 And La1-ycaymno3. II. Oxidation-reduction Behavior, J. W. Stevenson, M. M. Nasrallah, Harlan U. Anderson, and Don M. Sparlin
Evaluation of YBa₂Cu₃O₇₋ₓ Bulk Superconductors for High Field Magnet Applications, Michael Strasik, Fatih Dogan, J. Liu, Mehmet Sarikaya, K. Y. Blohowiak, D. F. Garrigus, T. S. Luhman, Kevin E. McCrary, I. A. Aksay, and W. B. Hicks
Phase Identification in Rapidly Solidified Al-In Alloys Using High Resolution Synchrotron Radiation Diffraction and Transmission Electron Microscopy, J. Tao, David C. Van Aken, and J. C. Bilello
Decoppering of Liquid Lead Bullion by Elemental Sulphur Additions -- Part 1: Sulphidation of Lead by Elemental Sulphur, Brian S. Terry, Charles L. Harris, and D. G. C. Robertson
Decoppering of Liquid Lead Bullion by Elemental Sulphur Additions -- Part 2: Mechanism and Model for Decoppering, Brian S. Terry, Charles L. Harris, and D. G. C. Robertson
Electron Microscopy Study of the Precipitation of Rhenium in the B₂ Nickel Aluminide, David C. Van Aken, D. P. Mason, S. G. Malhotra, and J. G. Webber
The Influence Of Matrix Microstructure, G. M. Vyletel, J. E. Allison, and David C. Van Aken
Interaction of Silver/palladium Electrodes with Lead-and Bismuth-based Electroceramics, Sea-Fue Wang and Wayne Huebner
Preparation and Properties of Optically Transparent, Pressure-cured Poly (methyl Methacrylate) Composites, Kevin D. Weaver, James O. Stoffer, and D. E. Day
Enhanced Formation of Calcia-Gallia Glass by Containerless Processing, J. K. Richard Weber, Dennis R. Merkley, Collin D. Anderson, Paul C. Nordine, C. S. Ray, and D. E. Day
Metastable Microstructures in CVD Alpha-Iron, H. G. F. Wilsdorf and Joseph William Newkirk
The Effect of Li-Salt Additions on the Densification of Tin Oxide, Dahwei Yuan, Seafue Wang, Wayne Huebner, and George Simkovich
Second Law Analysis of Active Magnetic Regenerative Hydrogen Liquefiers, Lifeng Zhang, S. A. Sherif, T. N. Veziroglu, and John W. Sheffield
Submissions from 1992
Review Of P-type Doped Perovskite Materials For SOFC And Other Applications, Harlan U. Anderson
Effect Of Ultrasound On Acidified Brine Leaching Of Double-kiln Treated EAF Dust, J. A. Barrera-Godinez, Thomas J. O'Keefe, and Johh L. Watson
Multinuclear MAS NMR Study of the Short-Range Structure of Fluorophosphate Glass, Richard K. Brow, Z. A. Osborne, and R. James Kirkpatrick
X-ray Photoelectron Spectroscopy Study of Anion Bonding in Tin(II) Fluorophosphate Glass, Richard K. Brow, Carol C. Phifer, X. J. Xu, and D. E. Day
A Study Of The Recrystallization Of Cold-worked Copper By Doppler Broadening Of Annihilation Radiation, P. G. Coleman, L. Head, R. M. Hudson, and Hollis P. Leighly
Sintering, Creep, and Electrical Conductivity of Model Glass-Matrix Composites, Rollie E. Dutton and M. N. Rahaman
The Response of Dispersion-Strengthened Copper Alloys to High Fluence Neutron Irradiation at 415⁰C, Danny J. Edwards, Joseph William Newkirk, Frank A. Garner, Margaret L. Hamilton, A. Nadkarny, and P. K. Samal
Formation of Microporous Silica Gels from a Modified Silicon Alkoxide I, William Fahrenholtz, Douglas M. Smith, and Duen-Wu Hua
Factors Controlling the Sintering of Ceramic Particulate Composites: I, Conventional Processing, Chenlung Fan and M. N. Rahaman
Response of Solute and Precipitation Strengthened Copper Alloys at High Neutron Exposure, Frank A. Garner, Margaret L. Hamilton, Tatsuo Shikama, Danny J. Edwards, and Joseph William Newkirk
Mechanical Behavior and Interface Design of MoSi₂-based Alloys and Composites, Ronald Gibala, A. K. Ghosh, David C. Van Aken, David J. Srolovitz, Amar S. Basu, H. Chang, D. P. Mason, and W. Yang
Electrochemical Evaluation Of The Adherence Of Zinc To Aluminum Cathodes, Jang Sop Han and Thomas J. O'Keefe
The Degradation Of Aluminium Cathodes By Fluoride Ion During Zinc Electrowinning, J. S. Han and Thomas J. O'Keefe
Effect of Gas Sparging on Mass Transfer in Zinc Electrolytes, Ashraf Youssef Ezz-Eldin Hosny, Thomas J. O'Keefe, James W. Johnson, and William Joseph James
X‐ray Powder Diffraction Structural Phase‐Transition Study Of La(Cr1‐xMnx)O3 (x = 0 To 0.25) Using The Rietveld Method Of Analysis, Scott A. Howard, Jen‐Kuan ‐K Yau, and Harlan U. Anderson
Factors Controlling the Sintering of Ceramic Particulate Composites, II. Coated Inclusion Particles, Ching-Li Hu and M. N. Rahaman
Mössbauer Effect Study of Reduction of Ilmenite, R. Immele-Meziou, Oran Allan Pringle, D. G. C. Robertson, and Gary J. Long
Reactive Laser Ablation Synthesis of Nanosize Alumina Powder, Gregory P. Johnston, Ross Muenchausen, Douglas M. Smith, William Fahrenholtz, and Steve Foltyn
Model Epoxy/metal-oxide Chemical Interactions: Diethanolamine on Oxidized Copper and Aluminum, Jeffry A. Kelber and Richard K. Brow
The Program 'high-strength Cast Iron' for the Design of Casting Production Technology, I. A. Khramchenkov, Semen Naumovich Lekakh, I. V. Khoroshko, and S. V. Kiselev
Effect Of Cation Substitution On The Thermal Expansion Coefficient Of LaCrO3, R. Koc and Harlan U. Anderson
Electrical Conductivity And Seebeck Coefficient Of (La, Ca) (Cr, Co)O3, R. Koc and Harlan U. Anderson
Investigation Of Strontium-doped La(Cr, Mn)O3 For Solid Oxide Fuel Cells, Rasit Koc and Harlan U. Anderson
Grain Size Effect on the Induced Piezoelectric Properties of 0.9PMN-0.1PT Ceramic, U. Kumar, Wayne Huebner, P. Marsh, H. Kankul, S. F. Wang, and Clyde G. Oakley
Iron Nitride Films Formed in a R. F. Glow Discharge, J. L. Li, Thomas J. O'Keefe, and William Joseph James
Optical and Mechanical Properties of Optically Transparent Poly(methyl Methacrylate) Composites, Hongy Lin, D. E. Day, and James O. Stoffer
Densification and Fracture Toughness Enhancement of Pressureless Sintered Aluminum Oxide-titanium Diboride Composites, T. V. Lin and P. D. Ownby
Boron Carbide Whisker and Platelet Reinforced Ceramic Matrix Composites, J. Liu and P. D. Ownby
Quantitative Analysis of the Crystalline Phases in Β-alumina-based Solid Electrolytes Using X-ray Powder Diffraction, J. Liu, P. D. Ownby, J. L. Shen, and S. A. Howard
Internal Friction Study of Melting in Aluminum-indium and Aluminum-lead Alloys, Ashwani K. Malhotra and David C. Van Aken
