Submissions from 2009
Improving Build Speed in Rapid Freeze Prototyping through Increase of Heat Transfer, Ming C. Leu, Sriram P. Isanaka, and Von L. Richards
Ab Initio Calculations of Vibrational Energy Levels and Transition Dipole Moments of CO2 Molecules, Zhi Liang and Hai-Lung Tsai
Ab Initio Calculations of Vibrational Energy Levels and Transition Dipole Moments of CO₂ Molecules, Z. Liang and Hai-Lung Tsai
Microscopic Energy Transport Through Photon-Electron- Phonon Interactions During Ultrashort Laser Ablation of Wide Bandgap Materials Part II: Phase Change, L. Li, Lan Jiang, Hai-Lung Tsai, and S. Wang
One-Step Fabrication of Nanostructures by Femtosecond Laser for Surface-Enhanced Raman Scattering, Cheng-Hsiang Lin, Lan Jiang, Yen-Hsin Chai, Hai Xiao, Shean-Jen Chen, and Hai-Lung Tsai
Fabry-Perot Interferometer Embedded in a Glass Chip Fabricated by Femtosecond Laser, Cheng-Hsiang Lin, Lan Jiang, Hai Xiao, Yen-Hsin Chai, Shean-Jen Chen, and Hai-Lung Tsai
Fabrication of Microlens Arrays in Photosensitive Glass by Femtosecond Laser Direct Writing, Cheng-Hsiang Lin, Hai Xiao, Hai-Lung Tsai, Lan Jiang, Yen-Hsin Chai, and Shean-Jen Chen
A Rapid Manufacturing Process for High Performance Precision Metal Parts, Frank W. Liou and Mary Kinsella
Liquid Phase Migration in Extrusion of Aqueous Alumina Paste for Freeze-Form Extrusion Fabrication, Hongjun Liu and Ming-Chuan Leu
An Intelligent Computational Argumentation System for Supporting Collaborative Software Development Decision Making, Xiaoqing Frank Liu, Ekta Khudkhudia, Lei Wen, Vamshi Sajja, and Ming-Chuan Leu
Contribution based Priority Assessment in a Web-Based Intelligent Argumentation Network for Collaborative Software Development, Xiaoqing Frank Liu, Maithili Satyavolu, and Ming-Chuan Leu
Multiscale Modeling of Phase Changes During Femtosecond Laser Metal Interaction, Xin Li, Lan Jiang, and Hai-Lung Tsai
Phase Change Mechanisms During Femtosecond Laser Pulse Train Ablation of Nickel Thin Films, Xin Li, Lan Jiang, and Hai-Lung Tsai
Extended Conical Flow Theory for Design of Pressure Probes in Supersonic Flows with Moderate Flow Angularity and Swirl, Luca Maddalena, Serhat Hosder, Aristides Bonanos, and Paul Dimotakis
An Assessment of Wind-hydrogen Systems for Light Duty Vehicles, Kevin B. Martin and Scott Erwin Grasman
Influence of the Combustion Energy Release on Surface Accelerations of an HCCI Engine, Jeffery A. Massey, J. A. Drallmeier, Scott J. Eaton, and Robert M. Wagner
Supervisory Control Development of a Fuel Cell Plug-in Hybrid Electric Vehicle, Andrew Meintz, Mehdi Ferdowsi, and Kevin B. Martin
Low Velocity Impact of Composites Manufactured Using Out-Of-Autoclave Process, V. G. K. Menta, Rama Bhadra Raju Vuppalapati, K. Chandrashekhara, and Nam Phan
Progress in Modeling of Pre-Ionization and Geometric Effects on a Field-Reversed Configuration Plasma Thruster, S. W. Miller and Joshua L. Rovey
Friction Stir Channeling: Characterization of the Channels, Rajiv S. Mishra, K. Krishnamurthy, and Nagarajan Balasubramanian
Extended Near Wall Hindered Diffusion Theory for Nanoparticles under Short and Long Range Interactions, Suchi Subhra Mukherji and Arindam Banerjee
Fault Propagation and Sensitivity Analysis to Support Counterterrorism Activities, Robert L. Nagel, James L. Greer, Robert B. Stone, and Daniel A. McAdams
Development of a Vision System for an Intelligent Ground Vehicle, Robert L. Nagel, Kenneth Perry, Robert B. Stone, and Daniel A. McAdams
Function Design Framework (Fdf): Integrated Process and Function Modeling for Complex Systems, Robert L. Nagel, Robert B. Stone, Ryan S. Hutcheson, Daniel A. McAdams, and Joseph A. Donndelinger
Sandwich Panels with Stepped Facings, Cody H. Nguyen, K. Chandrashekhara, and Victor Birman
Development of Extrusion-on-Demand for Ceramic Freeze-Form Extrusion Fabrication, Thomas Oakes, Parimal Kulkarni, Robert G. Landers, and Ming-Chuan Leu
Design and Implementation of a General Tracking Controller for Friction Stir Welding Processes, Thomas Michael Oakes and Robert G. Landers
Development of Web-Based Virtual CNC Milling Machine and Machining Process Simulation and Learning, A. Chukwujekwu Okafor, V. Irigireddy, R. Gulati, and H. Ahmadi
Multiagent Shape Grammar Implementation: Automatically Generating Form Concepts According to a Preference Function, Seth D. Orsborn and J. Cagan
Quantifying Aesthetic Form Preference in a Utility Function, Seth D. Orsborn, Jonathan Cagan, and Peter Boatwright
The Part Count Tool (PaCT) for Concept Selection, Tarang Parashar, Katie Grantham Lough, and Robert B. Stone
Integration of Collaborative Engineering Design Using Teamcenter Community in Mechanical Engineering Curricula, Xiaobo Peng, Qiang Niu, and Ming-Chuan Leu
Functionally Graded Materials by Laser Metal Deposition, Syamala Rani Pulugurtha, Joseph William Newkirk, Frank W. Liou, and Hsin-Nan Chou
Neuroadaptive Model Following Controller Design for Non-Affine Non-Square Aircraft System, Karthikeyan Rajagopal, Anusha Mannava, S. N. Balakrishnan, Nhan T. Nguyen, and Kalmanje Krishnakumar
Determination of Equilibrium Wire Feed Speeds for a Stable Gmaw Process, Z. H. Rao, J. Hu, S. M. Liao, and Hai-Lung Tsai
Study the Shielding Gas Effect on the Metal Transfer and Weld Pool Dynamics in GMAW, Z. H. Rao, J. Hu, S. M. Liao, and Hai-Lung Tsai
Mathematical Modeling of Electrode Cooling in Resistance Spot Welding, Z. H. Rao, S.M. Liao, Hai-Lung Tsai, P.-C. Wang, and R. Stevenson
Market Share Uncertainty Modeling for Decision-Analytic Concept Evaluation, S. S. Razu and Shun Takai
Process Parameters Study for Net-shape Steel Casting, Von Richards, Semen Naumovich Lekakh, Darryl M. Kline, K. Chandrashekhara, and J. Chen
Electric Propulsion, Joshua L. Rovey
Plume Profiles of a Planar Crossed-Field Thruster with Hall Current Injection, Joshua L. Rovey, Matthew P. Giacomi, Robert A. Stubbers, and Brian E. Jurczyk
Annual Business and News: Beginning the 32nd Year, George T. Schmidt, M. Akella, S. N. Balakrishnan, M. E. Campbell, J. P. Clarke, R. D. Colgren, J. L. Crassidis, D. B. Doman, F. O. Eke, R. J. Enns, W. Gawronski, H. B. Hablani, J. A. Leitner, L. Ping, M. MacDonald, M. B. McFarland, R. G. Melton, J. Mitchell, V. Mukhopadhyay, J. Z. Sasiadek, H. Schaub, and K. A. Wise
A Rural Hydrogen Transportation Test Bed, John W. Sheffield and Ümit Özgür Köylü
Reinforcement-Learning-Based Output-Feedback Control of Nonstrict Nonlinear Discrete-Time Systems with Application to Engine Emission Control, Peter Shih, Brian C. Kaul, Jagannathan Sarangapani, and J. A. Drallmeier
A CFD Model of Autothermal Reforming, Liming Shi, David J. Bayless, and Michael E. Prudich
Integrating Concept Selection in a Software Development Process, M. Singiresu, K. Boggavarapu, and Shun Takai
Development of a Melt Pool Tracking Vision System for Laser Deposition, Todd E. Sparks, Lie Tang, and Frank W. Liou
An Overview of Biomimetic Sensor Technology, Jacquelyn K. Stroble, Robert B. Stone, and Steve Eugene Watkins
Notes on Programming the Microchip Internet Radio Demo Board, Daniel S. Stutts
Temperature Dependent Fatigue-Failure Analysis of V-Ribbed Serpentine Belts, Saikrishna Sundararaman, J. Hu, J. Chen, and K. Chandrashekhara
Aerodynamics of Flapping and Plunging Wings using Particle Image Velocimetry Measurements, Taylor A. Swanson and Kakkattukuzhy M. Isaac
The Effect of Camber on Force Generation in Leading Edge/Trailing Edge Switching Hovering Mode, Taylor A. Swanson and Kakkattukuzhy M. Isaac
A Case-Based Reasoning Approach Toward Developing a Belief About the Cost of Concept, Shun Takai
An Analytical Model of Collaboration Between Engineers Working on Team and on Individual Projects, Shun Takai
A Research Roadmap Toward a Holistic and Structured Top-Down Concept Selection Methodology, Shun Takai
Melt Pool Temperature Modeling and Control for Laser Metal Deposition Processes, Lie Tang and Robert G. Landers
Layer-To-Layer Height Control of Laser Metal Deposition Processes, Lie Tang, Jianzhong Ruan, Todd E. Sparks, Robert G. Landers, and Frank W. Liou
Online Melt Pool Temperature Control for Laser Metal Deposition Processes, Lie Tang, Todd E. Sparks, Jianzhong Ruan, Robert G. Landers, and Frank W. Liou
Performance of the Mobility Sizing Technique Relative to Independent Diagnostics for the Characterization of Polydisperse Soot Aggregates, Yingwu Teng, Ümit Özgür Köylü, Donald E. Hagen, and Philip D. Whitefield
Three Dimensional Mixed Convection in Plane Symmetric-Sudden Expansion: Symmetric Flow Regime, Magesh Thiruvengadam, Bassem F. Armaly, and J. A. Drallmeier
Shear-driven Liquid Film in a Duct, Magesh Thiruvengadam, B. F. Armaly, and J. A. Drallmeier
Investigations of Femtosecond-Nanosecond Dual-Beam Laser Ablation of Dielectrics, Hai-Lung Tsai, Lan Jiang, Zheng-Hua Rao, Cheng-Hsiang Lin, Wu-Jung Tsai, Ping-Han Wu, and Chih-Wei Chien
Quantifying Product Color Preference in a Utility Function, Hannah Turner, Seth D. Orsborn, and Katie Grantham Lough
A Computational Study on Performance, Combustion and Emission Characteristics of a Hydrogen-Fueled Internal Combustion Engine, Shravan K. Vudumu and Ümit Özgür Köylü
Detailed Simulations of the Transient Hydrogen Mixing, Leakage and Flammability in Air in Simple Geometries, Shravan K. Vudumu and Ümit Özgür Köylü
Development and Integration of Engine Simulation Projects into the Mechanical Engineering Curriculum At Missouri S&T, Shravan K. Vudumu and Ümit Özgür Köylü
Reliability - Based Design Incorporating Several Maintenance Policies, Zhonglai Wang, Hong-Zhong Huang, and Xiaoping Du
Biology-Inspired Sensor Design, Steve Eugene Watkins and Robert B. Stone
Experimental Evaluation of a Film Separation Criterion, J. L. Wegener, M. A. Friedrich, J. A. Drallmeier, and B. F. Armaly
Miniaturized Fiber Inline Fabry-Pérot Interferometer for Chemical Sensing, Tao Wei, Yukun Han, Hai-Lung Tsai, and Hai Xiao
Quantum Information Processing Through Quantum Dots in Slow-Light Photonic Crystal Waveguides, Chee Wei Wong, Jie Gao, James F. McMillan, Fangwen Sun, and Ranojoy Bose
Axiomatic Functional and Object-oriented Product Design Framework, J. C. Wu, Xiaoqing Frank Liu, and Ming-Chuan Leu
A Hierarchical Object-Oriented Functional Modeling Framework for Co-Design of Mechatronic Products, Jen-Chi Wu, Ming-Chuan Leu, and Xiaoqing Frank Liu
Three-dimensional Modeling of Arc Plasma and Metal Transfer in Gas Metal Arc Welding, Gu Xu, J. Hu, and Hai-Lung Tsai
Preparation and Bioadhesion of Micro-Gel of Thiolated Carboxymethyl Chitosan, Yongmei Xu, Wei Zhou, Lei Yin, Le Wang, Lan Jiang, and Yuan Shen
Advanced Pure Pursuit Guidance Via Sliding Mode Approach for Chase UAV, Takeshi Yamasaki, Keisuke Enomoto, Hiroyuki Takano, Yoriaki Baba, and S. N. Balakrishnan
Deterministic Phase-Control and Resonance-Detuning in Optical EIT-Like Coupled Resonances Towards Dynamical Storage of Light, Xiaodong Yang, M. Yu, D.-L. Kwong, and C. W. Wong
Femtosecond Laser-induced Silicon Surface Morphology in Water Confinement, Han Yukun, Cheng-Hsiang Lin, Hai Xiao, and Hai-Lung Tsai
A Spatial Warping Method for Freeform Modeling Based on a Level-Set Method, Weihan Zhang and Ming-Chuan Leu
Surface Reconstruction Using Dexel Data from Three Sets of Orthogonal Rays, Weihan Zhang and Ming-Chuan Leu
Numerical Simulation of Wear in a C/C Composite Multidisk Clutch, Shuangmei Zhao, Greg Hilmas, and Lokeswarappa R. Dharani
Empirical Dynamic Modeling of Friction Stir Welding Processes, Xin Zhao, Prabhanjana Kalya, Robert G. Landers, and K. Krishnamurthy
Path Force Control for Friction Stir Welding Processes, Xin Zhao, Prabhanjana Kalya, Robert G. Landers, and K. Krishnamurthy
Ab Initio Calculations of Infrared Absorption Cross Sections of CO₂ Gas, L. Zhi and Hai-Lung Tsai
Investigation of Mixing and Diffusion Processes in Hybrid Spot Laser-MIG Keyhole Welding, Jia Zhou and Hai-Lung Tsai
Submissions from 2008
Micromachined Nanoporous Membranes For Blood Oxygenation Systems, Vijayakrishnan Ambravaneswaran, Susheil Uttamaraj, Zeynep Çelik-Butler, Robert C. Eberhart, Charles J. Chuong, Richard E. Billo, and Michael A. Savitt
Issues on Stability of ADP Feedback Controllers for Dynamical Systems, S. N. Balakrishnan, Jie Ding, and F. L. Lewis
Discussion and Analysis of Missile IGC Design, S. N. Balakrishnan, Ernest J. Ohlmeyer, and Michael W. Dancer
Preliminary Study of Pressure Drop and Heat Transfer Through a Friction Stir Channel, Nagarajan Balasubramanian, K. Krishnamurthy, and Rajiv S. Mishra
Effect of Mechanical Surface Treatments on Ti-6Al-4V Direct Metal Deposition Parts, Yaxin Bao, Joseph William Newkirk, Jianzhong Ruan, Todd E. Sparks, and Frank W. Liou
Design of a Linear Time-Varying Cross-Coupled Iterative Learning Controller, K. L. Barton, Douglas A. Bristow, and Andrew G. Alleyne
Sulphur-Tolerant Anode for Solid Oxide Fuel Cell, David J. Bayless and Jason P. Trembly
Shape Memory Elastic Foundation and Supports for Passive Vibration Control of Composite Plates, Victor Birman
Methodology for Selection of Optimum Light Stringers in Functionally Graded Panels Designed for Prescribed Fundamental Frequency or Buckling Load, Victor Birman and Larry W. Byrd
Stability and Natural Frequencies of Functionally Graded Stringer-Reinforced Panels, Victor Birman and Larry W. Byrd
Effect of Two-dimensional Grading on the Thermomechanical Response of the Panel, Victor Birman, Ravinder Chona, and Larry W. Byrd
Quantifying and Maximizing Aesthetic Preference, Peter Boatwright, Seth D. Orsborn, and Jonathan Cagan
Growth of ZnO Nanowires for Dye-Sensitized Solar Cells, Janice Boercker, Yasuhide Nakamura, Spencer Schaber, Jillian B. Schmidt, and Eray S. Aydil
Introduction of a Data Schema to Support a Design Repository, Matt R. Bohm, Robert B. Stone, Timothy W. Simpson, and Elizabeth D. Steva
Using a Design Repository to Drive Concept Generation, Matt R. Bohm, Jayson P. Vucovich, and Robert B. Stone
