Submissions from 2010
Effect of Local Impedance Variation and Non-Linearity on Multiple Tone Attenuation, Walter Eversman
Reprint Of: Effect of Lining Non-Linearity on Realized Attenuation of Tonal Noise, Walter Eversman
Influence Of Interactions Between Turbulence And Radiation On Transmissivities In Hypersonic Turbulent Boundary Layers, A. M. Feldick, L. (Lian) Duan, M. F. Modest, M. P. Martín, and D. A. Levin
Thrust Measurement of Dielectric Barrier Discharge Plasma Actuators and Power Requirements for Aerodynamic Control, J. W. Ferry and Joshua L. Rovey
Design and Implementation of a Linear Axis Rapid Development System for Education, Michael Anthony Fleming and Robert G. Landers
Uncertainty Analysis in Laser Deposition Finish Machining Operations, Jomy Francis, Todd E. Sparks, and Frank W. Liou
Weak Exciton-Photon Coupling of PbS Nanocrystals in Air-Slot Mode-Gap Si Photonic Crystal Nanocavities in the Near-Infrared, Jie Gao, Felice Gesuele, Weon-kyu Koh, Christopher B. Murray, Solomon Assefa, and Chee Wei Wong
Demonstration of an Air-Slot Mode-Gap Confined Photonic Crystal Slab Nanocavity with Ultrasmall Mode Volumes, Jie Gao, James F. McMillan, Ming-Chung Wu, Jiangjun Zheng, Solomon Assefa, and Chee Wei Wong
Implement Scheme for Phase Switching Through Quantum Dots in Slow-Light Photonic Crystal Waveguides, Jie Gao and Chee Wei Wong
Hydrogen Fuel Cell Analysis: Lessons Learned from Stationary Power Generation Final Report, Scott E. Grasman, John W. Sheffield, Fatih Dogan, Sunggyu Lee, Umit O. Koylu, and Angie Rolufs
Numerical Modeling of Cold Weld Formation and Improvement in Gmaw of Aluminum Alloys, H. Guo, J. Hu, and Hai-Lung Tsai
Three-Dimensional Modeling of Gas Metal Arc Welding of Aluminum Alloys, H. Guo, J. Hu, and Hai-Lung Tsai
Effect of Different Graphite Materials on Electrical Conductivity and Flexural Strength of Bipolar Plates Fabricated by Selective Laser Sintering, Nannan Guo and Ming-Chuan Leu
Chip-Scale Integrated Tuning of Slow-Light in All-Optical Multi-EIT Analogue in Photonic Crystal Cavities, T. Gu, S. Kocaman, Xiaodong Yang, J. F. McMillan, M. Yu, D. L. Kwong, and C. W. Wong
Measurement of Refractive Index Change of Optical Fiber Core Induced by Femtosecond Laser Scanning, Y. Han, T. Wei, Hai-Lung Tsai, and Hai Xiao
Sliding Mode Integrated Missile Guidance and Control, Nathan Harl, S. N. Balakrishnan, and C. Phillips
Combined H∞-feedback Control and Iterative Learning Control Design with Application to Nanopositioning Systems, Brian E. Helfrich, Chibum Lee, Douglas A. Bristow, Jingyan Dong, Srinivasa M. Salapaka, Placid M. Ferreira, X. H. Xiao, and Andrew G. Alleyne
Spectroscopic Determination of Rotational Temperature in C₂H₄ /C₂H₂/O₂ Flames for Diamond Growth with and Without Tunable CO₂ Laser Excitation, Xiang Nan He, X. K. Shen, T. Gebre, Zhi Qiang Xie, Lan Jiang, and Yongfeng Lu
Computational-Fluid-Dynamics-Based Clean-Wing Aerodynamic Noise Model for Design, Serhat Hosder, Joseph A. Schetz, William H. Mason, Bernard Grossman, and Raphael T. Haftka
Non-Intrusive Polynomial Chaos Methods for Uncertainty Quantification in Fluid Dynamics, Serhat Hosder and Robert W. Walters
Point-Collocation Nonintrusive Polynomial Chaos Method for Stochastic Computational Fluid Dynamics, Serhat Hosder, Robert W. Walters, and Michael Balch
Freeze Extrusion Fabrication of 13-93 Bioactive Glass Scaffolds for Bone Repair, Tieshu Huang, Nikhil D. Doiphode, M. N. Rahaman, Ming-Chuan Leu, B. Sonny Bal, and D. E. Day
A Hybrid Sensitivity Analysis for Use in Early Design, Ryan S. Hutcheson and Daniel A. McAdams
Conceptual Design of a Formula Hybrid Powertrain System Utilizing Functionality-Based Modeling Tools, Ryan S. Hutcheson and Daniel A. McAdams
Electrochemical MHD for Microfluidics Applications, Kakkattukuzhy M. Isaac, Debamoy Sen, and Nicholas Leventis
Electrochemical MHD for Microfluidics Applications, Kakkattukuzhy M. Isaac, Debamoy Sen, and Nicholas Leventis
Computer Aided Contour Profiling of High Strength Deposits, Sriram Praneeth Isanaka, Amar Bala Sridhar, Frank W. Liou, and Joseph William Newkirk
A Multi-axis Slicing Method for Direct Laser Deposition Process, Divya Kanakanala, Swathi Routhu, Jianzhong Ruan, Xiaoqing Frank Liu, and Frank W. Liou
Functionally Graded Sandwich Panels with Variable Fiber Volume Fraction in the Facings, Tyler J. Keil, Serhat Hosder, and Victor Birman
Solid Oxide Fuel Cell Bi-Layer Anode with Gadolinia-Doped Ceria for Utilization of Solid Carbon Fuel, Isaiah D. Kellogg, Ümit Özgür Köylü, and Fatih Dogan
Time-Domain Demonstrations of Slow-Light in Multi-Coupled Photonic Crystal Cavities, S. Kocaman, Xiaodong Yang, J. F. McMillan, T. Gu, M. Yu, D. L. Kwong, and C. W. Wong
Observations of Temporal Group Delays in Slow-Light Multiple Coupled Photonic Crystal Cavities, S. Kocaman, Xiaodong Yang, J. F. McMillan, M. B. Yu, D. L. Kwong, and C. W. Wong
Measurement Sensitivity in Tapping-mode Atomic Force Microscopy using a Bi-harmonic Drive Signal, Santosh R. Kodandarama and Douglas A. Bristow
Selective Laser Sintering and Freeze Extrusion Fabrication of Scaffolds for Bone Repair using 13-93 Bioactive Glass: A Comparison, Krishna C. R. Kolan, Nikhil P. Doiphode, and Ming-Chuan Leu
Selective Laser Sintering of 13-93 Bioactive Glass, Krishna C. R. Kolan, Ming-Chuan Leu, Greg Hilmas, and Mariano Garcia Velez
MEA Manufacturing using an Additive Manufacturing Process to Deposit a Catalyst Pattern in an MEA and Its Impact on Cost Reduction, Nikhil P. Kulkarni, Todd E. Sparks, Gargi Tandra, and Frank W. Liou
On Combined Use of POD Modes and Ritz Vectors for Model Reduction in Nonlinear Structural Dynamics, Nishant Kumar and Thomas D. Burton
Developing Laminar Gravity-Driven Thin Liquid Film Flow Down an Inclined Plane, Hai Lan, J. L. Wegener, Bassem F. Armaly, and J. A. Drallmeier
Optimal Control for Proximity Operations and Docking, D. Lee and Henry J. Pernicka
Optimization of Selective Laser Sintering Process for Fabrication of Zirconium Diboride Parts, Ming-Chuan Leu, Shashwatashish Pattnaik, and Greg Hilmas
Computer Program and Method for Detecting and Predicting Valve Failure in a Reciprocating Compressor, Ming-Chuan Leu, Jagannathan Sarangapani, and Raghuram Puthall Ramesh
Static and Dynamic Stabilities of Fluid Pipes on Elastic Foundation, F. Liang, J.-D. Jin, Xiaodong Yang, and B.-C. Wen
Calculation of Thermophysical Properties for CO2 Gas using an Ab Initio Potential Model, Zhi Liang
Calculation of Thermophysical Properties for CO2 Gas using an Ab Initio Potential Model, Zhi Liang and Hai-Lung Tsai
Molecular Dynamics Simulations of Self-Diffusion Coefficient and Thermal Conductivity of Methane At Low and Moderate Densities, Zhi Liang and Hai-Lung Tsai
Prediction of the Transport Properties of a Polyatomic Gas, Zhi Liang and Hai-Lung Tsai
Prediction of the Transport Properties of a Polyatomic Gas, Zhi Liang and Hai-Lung Tsai
The Vibrational Contribution to the Thermal Conductivity of a Polyatomic Fluid, Zhi Liang and Hai-Lung Tsai
Calculation of Thermophysical Properties for CO₂ Gas Using an Ab Initio Potential Model, Z. Liang and Hai-Lung Tsai
The Vibrational Contribution to the Thermal Conductivity of a Polyatomic Fluid, Z. Liang and Hai-Lung Tsai
A Method to Fabricate 2D Nanoparticle Arrays, Cheng-Hsiang Lin, Lan Jiang, Yen-Hsin Chai, Hai Xiao, Shean-Jen Chen, and Hai-Lung Tsai
Surface-Enhanced Raman Scattering Microchip Fabricated by Femtosecond Laser, Cheng-Hsiang Lin, Lan Jiang, Hai Xiao, Shean-Jen Chen, and Hai-Lung Tsai
Laser-Treated Substrate with Nanoparticles for Surface-Enhanced Raman Scattering, Cheng-Hsiang Lin, Lan Jiang, Jinping Zhou, Hai Xiao, Shean-Jen Chen, and Hai-Lung Tsai
Real-Time Depth Measurement for Micro-Holes Drilled by Lasers, Cheng-Hsiang Lin, Rock A. Powell, Lan Jiang, Hai Xiao, Shean-Jen Chen, and Hai-Lung Tsai
Investigations of Femtosecond-nanosecond Dual-beam Laser Ablation of Dielectrics, Cheng Hsiang Lin, Zheng Hua Rao, Lan Jiang, Wu Jung Tsai, Ping Han Wu, Chih Wei Chien, Shean Jen Chen, and Hai Lung Tsai
Enhancement of Ablation Efficiency by a Femto/Nano-Second Dual-Beam Micromachining System, Cheng-Hsiang Lin, Zheng-Hua Rao, Hai-Lung Tsai, Lan Jiang, Wu-Jung Tsai, Ping-Han Wu, and Chih-Wei Chien
Ultrasensitive Chemical Sensors Based on Whispering Gallery Modes in a Microsphere Coated with Zeolite, N. Lin, Lan Jiang, S. Wang, L. Yuan, Hai Xiao, Y. Lu, and Hai-Lung Tsai
Multi-Axis Planning System (MAPS) for Hybrid Laser Metal Deposition Processes, Frank W. Liou, Jianzhong Ruan, and Todd E. Sparks
Research on Extrusion Velocity in Freeform Extrusion Fabrication of Aqueous Alumina Paste, Hong Jun Liu and Ming-Chuan Leu
Direct Multiscale Analysis of Transverse Vibrations for an Axially Accelerating Orthotropic Plate, J. Liu, Xiaodong Yang, Y. Zhang, and B. Wen
An Iteration-Domain Filter for Controlling Transient Growth in Iterative Learning Control, Qing Liu and Douglas A. Bristow
Bi-Material Attachment through a Soft Tissue Interfacial System, Y. X. Liu, S. Thomopoulos, Victor Birman, J. S. Li, and G. M. Genin
Femtosecond Laser Fabrication of Fiber Microresonator Sensors: Experiments and Modeling, Xin Li, Lan Jiang, Sumei Wang, Yongfeng Lu, Hai-Lung Tsai, and Hai Xiao
Optomechanical Coupling in Slot-Type Photonic Crystal Cavities: Theory, Ying Li, Jie Gao, Shakthi Nellaiappan, and Chee Wei Wong
Dispersive Optomechanical Coupling and Cooling in Ultrahigh-Q/V Slot-Type Photonic Crystal Cavities, Ying Li, Jiangjun Zheng, Jie Gao, Jing Shu, Mehmet Sirin Aras, and Chee Wei Wong
Diameter Modulation by Fast Temperature Control in Laser-Assisted Chemical Vapor Deposition of Single-Walled Carbon Nanotubes, Masoud Mahjouri-Samani, Yunshen Zhou, Wei Xiong, Yang Gao, M. Mitchell, Lan Jiang, and Yongfeng Lu
Evaluation of Honeycomb Composite Sandwich Structures Manufactured Using Vartm Process, V. G. K. Menta, Rama Bhadra Raju Vuppalapati, K. Chandrashekhara, D. Pfitzinger, and Nam Phan
Manufacturing and Mechanical Performance Evaluation of Resin-Infused Honeycomb Composites, V. G. K. Menta, Rama Bhadra Raju Vuppalapati, K. Chandrashekhara, D. Pfitzinger, and Nam Phan
Control and State Estimation Techniques for the M-Sat Mission, J. H. Meub, M. W. Dancer, and Henry J. Pernicka
Pulse Discharge Network Development for a Heavy Gas Field Reversed Configuration Plasma Device, Shawn W. Miller and Joshua L. Rovey
Designing a Modular Rapid Manufacturing Process, Jacquelyn K. S. Nagel and Frank W. Liou
Function-Based Design Process for an Intelligent Ground Vehicle Vision System, Robert L. Nagel, Kenneth L. Perry, Robert B. Stone, and Daniel A. McAdams
FunctionCAD: A Functional Modeling Application based on the Function Design Framework, Robert L. Nagel, Kenneth L. Perry, Robert B. Stone, and Daniel A. McAdams
A comparative verification of forecasts from two operational solar wind models, Donald C. Norquist and Warner C. Meeks
Development of Web-Based Virtual CNC Milling Machine Tool with Mechanistic Cutting Force Models for Education and Learning, A. Chukwujekwu Okafor, Vinay R. Talekar, V. Irigireddy, and R. Gulati
Effects of Gas Flow Rate and Catalyst Loading on Polymer Electrolyte Membrane (Pem) Fuel Cell Performance and Degradation, Anthony Chukwujekwu Okafor and H.-M. C. Mogbo
Direct Detection Of NO Produced By High-temperature Surface-catalyzed Atom Recombination, Dušan A. Pejaković, Jochen Marschall, Lian Duan, and Maria P. Martin
Sorting Results of Automated Concept Generators based on Design for Manufacture and Assembly, Kerry R. Poppa and Robert B. Stone
Exploring Automated Concept Generator Output Through Principal Component Analysis, K. R. Poppa, Robert B. Stone, and Seth D. Orsborn
Functionally Graded Materials by Laser Metal Deposition (preprint), Syamala R. Pulugurtha, Joseph William Newkirk, Frank W. Liou, and Hsin-Nan Chou
Depth and Breakthrough Detection for Laser Machining, J. P. Quitter, C. E. Yaworsky, and Hai-Lung Tsai
Robust Adaptive Control of a Structurally Damaged Aircraft, Karthikeyan Rajagopal, S. N. Balakrishnan, Nhan T. Nguyen, and Kalmanje Krishnakumar
Robust Adaptive Control of a General Aviation Aircraft, Karthikeyan Rajagopal, S. N. Balakrishnan, James E. Steck, and Dwayne Kimball
Modeling of the Transport Phenomena in GMAW Using Argon-Helium Mixtures. Part II - the Metal, Z. H. Rao, J. Hu, S. M. Liao, and Hai-Lung Tsai
Modeling of the Transport Phenomena in GMAW Using Argon-Helium Mixtures. Part I - the Arc, Z. H. Rao, J. Hu, S. M. Liao, and Hai-Lung Tsai
Effects of Shielding Gas Compositions on Arc Plasma and Metal Transfer in Gas Metal Arc Welding, Z. H. Rao, S. M. Liao, and Hai-Lung Tsai
Three-Dimensional Modeling of Transport Phenomena and their Effect on the Formation of Ripples in Gas Metal Arc Welding, Z. H. Rao, J. Zhou, S. M. Liao, and Hai-Lung Tsai
An Approach to Modeling Customer Preference Uncertainty by Applying Bootstrap to Choice-Based Conjoint Analysis Data, S. S. Razu and Shun Takai
Integrated Process Planning for a Multiaxis Hybrid Manufacturing System, Lan Ren, Todd E. Sparks, Jianzhong Ruan, and Frank W. Liou
Characterization of Aerospace Vehicle Performance and Mission Analysis Using Thermodynamic Availability, David W. Riggins, D. J. Moorhouse, and J. A. Camberos
Hydrogen Safety: A Focus on Power Generation Applications, Steven F. Rodgers, Shravan K. Vudumu, Scott Erwin Grasman, Susan L. Murray, and Ümit Özgür Köylü
2-D Path Planning for Direct Laser Deposition Process, Swathi Routhu, Divya Kanakanala, Jianzhong Ruan, Xiaoqing Frank Liu, and Frank Liou
The Effect of Toolpath Intersection Angle in Metal Deposition, Jianzhong Ruan, A. Hayes, Todd E. Sparks, and Frank W. Liou
Direct Three-Dimensional Layer Metal Deposition, Jianzhong Ruan, Lie Tang, Frank W. Liou, and Robert G. Landers
Selection of Part Orientation for Multi-Axis Hybrid Manufacturing Process, Jianzhong Ruan, Jun Zhang, and Frank W. Liou
Propulsion and Aerodynamic Performance Evaluation of Jet-Wing Distributed Propulsion, Joseph A. Schetz, Serhat Hosder, Vance Dippold, and Jessica Walker
Thinned-Cladding Zeolite Coated Long Period Fiber Grating Chemical Sensor, G. Shen, Lan Jiang, S. Wang, B. Li, L. Zhou, Hai-Lung Tsai, and Hai Xiao
Research and Development of Microwire Handling Devices, Amogh J. Shenoy, Frank W. Liou, and Shyam Barua
Analytical Mechanics-Lagrange’s Equation and Its Application, Daniel S. Stutts, C. M. Krousgrill, and W. Soedel
Planform and Camber Effects on the Aerodynamics of Low-Reynolds-Number Wings, Taylor A. Swanson and Kakkattukuzhy M. Isaac
