Submissions from 2008
Improving Discharge Characteristics of Indirect Integral Collector Storage Systems with Multielement Storage, A. M. Boies and Kelly Homan
Temperature-Tuning of Near-Infrared (1.5µm) Monodisperse Quantum Dot Solids Toward Controllable Förster Energy Transfer, Ranojoy Bose, James F. McMillan, Jie Gao, Charlton J. Chen, Dmitri V. Talapin, Christopher B. Murray, Kelly M. M. Rickey, and Chee Wei Wong
Frequency Domain Analysis and Design of Iterative Learning Control for Systems with Stochastic Disturbances, Douglas A. Bristow
Weighting Matrix Design for Robust Monotonic Convergence in Norm Optimal Iterative Learning Control, Douglas A. Bristow
Monotonic Convergence of Iterative Learning Control for Uncertain Systems using a Time-Varying Filter, Douglas A. Bristow and Andrew G. Alleyne
Optimizing Learning Convergence Speed and Converged Error for Precision Motion Control, Douglas A. Bristow, Andrew G. Alleyne, and Marina Tharayil
High Bandwidth Control of Precision Motion Instrumentation, Douglas A. Bristow, Jingyan Dong, Andrew G. Alleyne, Srinivasa M. Salapaka, and Placid M. Ferreira
A Q, L Factorization of Norm-Optimal Iterative Learning Control, Douglas A. Bristow and Brandon Hency
Memic: An Interactive Morphological Matrix Tool for Automated Concept Generation, Cari R. Bryant Arnold, Robert B. Stone, and Daniel A. McAdams
An Interactive Morphological Matrix Computational Design Tool: A Hybrid of Two Methods, Cari R. Bryant, Matt Robert Bohm, Robert B. Stone, and Daniel A. McAdams
Modeling and Experimental Results of Concentration with Support Material in Rapid Freeze Prototyping, Frances D. Bryant and Ming-Chuan Leu
The Use of Hydrogen-Depleted Coal Syngas in Solid Oxide Fuel Cells, David D. Burnette, Gregory G. Kremer, and David J. Bayless
Methodology for Selection of Optimum Light Stringers in Functionally Graded Panels Designed for Prescribed Fundamental Frequency or Buckling Load, Larry W. Byrd and Victor Birman
Vibrations of Damaged Functionally Graded Cantilever Beams, Larry W. Byrd and Victor Birman
Manufacturing and Performance Evaluation of Glass-Ribbon Reinforced Transparent Composites, K. Chandrashekhara, Thomas P. Schuman, Saikrishna Sundararaman, D. E. Day, Mariano Velez, and Nam Phan
Digital Resonance Tuning of High-Q/Vm Silicon Photonic Crystal Nanocavities by Atomic Layer Deposition, C. J. Chen, Xiaodong Yang, C. A. Husko, and C. W. Wong
Engineering Lessons Learned from Fracture Failure of the Paseo Suspension Bridge, Genda Chen, Chris Courtright, Lokeswarappa R. Dharani, Bin Xu, and Bryan A. Hartnagel
Translating Terms of the Functional Basis into Biologically Meaningful Keywords, Hyunmin Cheong, L. H. Shu, Robert B. Stone, and Daniel A. McAdams
Effect of Two-Dimensional Grading on the Thermomechanical Response of the Panel, Ravinder Chona, Larry W. Byrd, and Victor Birman
Very High Channel Conductivity in Low-Defect AIN/GaN High Electron Mobility Transistor Structures, A. M. Dabiran, A. M. Wowchak, A. Osinsky, J. Xie, B. Hertog, B. Cui, Dwight C. Look, and P. P. Chow
Discussion and Analysis of Missile IGC Design, Michael W. Dancer, S. N. Balakrishnan, and Ernest J. Ohlmeyer
Orbit/attitude Determination and Control for the UMR SAT Mission, Michael W. Dancer, Jason D. Searcy, and Henry J. Pernicka
Orbit/Attitude Determination and Control for the UMR SAT Mission, M. W. Dancer, J. D. Searcy, and Henry J. Pernicka
Digital Design and Fabrication in Dentistry, Parthiban Delli, Mary P. Walker, and Ming-Chuan Leu
Saddlepoint Approximation for Sequential Optimization and Reliability Analysis, Xiaoping Du
Unified Uncertainty Analysis by the First Order Reliability Method, Xiaoping Du
Sequential Optimization and Reliability Assessment for Multidisciplinary Systems Design, Xiaoping Du, Jia Guo, and Harish Beeram
A General Approach to Robustness Assessment for Multidisciplinary Systems, Xiaoping Du and Yi Zhang
Nonlinear Control Techniques for Regulating the Altitude of a Radio/Control Helicopter, Sergio Esteban, S. N. Balakrishnan, Francisco Gordillo, and Javier Aracil
Continuous High-throughput Magnetic Separation of Pathogens from Blood, J. Fiering, C. W. Yung, A. J. Mueller, M. Varghese, Kakkattukuzhy M. Isaac, and D. E. Ingber
Hydrogen-Fueled Buses for DOD, D.L. Finney, F.H. Holcomb, John W. Sheffield, and S. H. Tupper
A Separation Criterion with Experimental Validation for Shear-Driven Films in Separated Flows, Mark A. Friedrich, Hai Lan, J. L. Wegener, J. A. Drallmeier, and Bassem F. Armaly
Microstructural Characterization of Diode Laser Deposited Ti-6Al-4V, Tian Fu, Zhiqiang Fan, Syamala R. Pulugurtha, Todd E. Sparks, Jianzhong Ruan, Frank W. Liou, and Joseph William Newkirk
Implementation Scheme for Quantum Controlled Phase-Flip Gate Through Quantum Dot in Silicon Slow-Light Photonic Crystal Waveguide, Jie Gao, Fangwen Sun, and Chee Wei Wong
Realizing Quantum Controlled Phase Gate Through Quantum Dot in Silicon Photonic Crystal Waveguide, Jie Gao, Fangwen Sun, Xiaodong Yang, and Chee Wei Wong
Micromechanics and Structural Response of Functionally Graded, Particulate-Matrix, Fiber-Reinforced Composites, Guy M. Genin and Victor Birman
Hybrid Prediction of Fan Tonal Noise, Sheryl Grace, Douglas Sondak, Walter Eversman, and Michael Cannamela
Reliability Analysis for Multidisciplinary System with Random and Interval Variables, Jia Guo and Xiaoping Du
Reentry Terminal Guidance through Sliding Mode Control, Nathan Harl and S. N. Balakrishnan
Commercial Aircraft Engine Emissions Characterization of In-Use Aircraft At Hartsfield-Jackson Atlanta International Airport, Scott Christopher Herndon, John T. Jayne, Prem Lobo, Timothy B. Onasch, Gregg Fleming, Donald E. Hagen, Philip D. Whitefield, and Richard Charles Miake-Lye
Dynamics of a Closed-Loop Thermosyphon Incorporating Thermal Storage, Kelly Homan and Kyle S. Benne
Efficient Uncertainty Quantification Applied to the Aeroelastic Analysis of a Transonic Wing, Serhat Hosder, Robert W. Walters, and Michael Balch
Modeling and Propagation of Physical Parameter Uncertainty in a Mars Atmosphere Model, Serhat Hosder, Robert W. Walters, and Michael Balch
Analysis of Composite Hydrogen Storage Cylinders Subjected to Localized Flame Impingements, J. Hu, J. Chen, Saikrishna Sundararaman, K. Chandrashekhara, and William Chernicoff
Modelling of Transport Phenomena in 3D GMAW of Thick Metals with V Groove, J. Hu and Hai-Lung Tsai
Effect of Model Element Fidelity Within a Complex Function-Based Behavioral Model, Ryan S. Hutcheson, Daniel A. McAdams, Robert B. Stone, and Irem Y. Tumer
Aerodynamics of a Flapping and Pitching Wing Using Simulations and Experiments, Kakkattukuzhy M. Isaac, Jessica Rolwes, and Anthony Colozza
Ablation Shape Determination under Ultrafast Laser Pulse Irradiation, Lan Jiang and Hai-Lung Tsai
A Plasma Model Combined with an Improved Two-Temperature Equation for Ultrafast Laser Ablation of Dielectrics, Lan Jiang and Hai-Lung Tsai
A Combined Model and its Verification for Femtosecond-Pulse Materials Interactions, L. Jiang and Hai-Lung Tsai
Modeling of the Hand-arm System for Impact Loading in Shear Fastener Installation, Akul Joshi, Robert Guttenberg, Susan L. Murray, and Ming-Chuan Leu
Sensitivity Analysis of Relative Worth in Empirical and Simulationbased QFD Matrices, R. M. Kalapurackal and Shun Takai
Sensitivity of Relative Worth in QFD Matrices to Rating Scales and Worth Calculation Schemes: An Empirical Study, Robins M. Kalapurackal and Shun Takai
Hydrogen Flammability Limits and Implications on Fire Safety of Transportation Vehicles, Ümit Özgür Köylü
Use of Random Excitation to Develop POD Based Reduced Order Models for Nonlinear Structural Dynamics, Nishant Kumar and Thomas D. Burton
Nonlinear Feed Effect in Machining Chatter Analysis, Robert G. Landers and A. Galip Ulsoy
Turbulent Forced Convection in a Plane Asymmetric Diffuser - Effect of Diffuser Angle, Hai Lan, Bassem F. Armaly, and J. A. Drallmeier
Simulation and Measurement of 3D Shear-Driven Thin Liquid Film Flow in a Duct, Hai Lan, Bassem F. Armaly, J. A. Drallmeier, and Mark A. Friedrich
Combined H∞ -Feedback and Iterative Learning Control Design with Application to Nanopositioning Systems, Chibum Lee, Douglas A. Bristow, Jingyan Dong, Andrew G. Alleyne, Srinivasa M. Salapaka, Placid M. Ferreira, and Brian E. Helfrich
Digital Design and Fabrication in Dentistry, Ming C. Leu, Parthiban Delli, and Mary P. Walker
Freeform Fabrication of Zirconium Diboride Parts using Selective Laser Sintering, Ming-Chuan Leu, Erik B. Adamek, Tieshu Huang, Greg Hilmas, and Fatih Dogan
Neural Network Based Constitutive Model for Elastomeric Foams, Guanghui Liang and K. Chandrashekhara
Ab Initio Calculations of Infrared Absorption Cross Sections of CO2 Gas, Zhi Liang
Determination of Vibrational Energy Levels and Transition Dipole Moments of CO2 Molecules by Density Functional Theory, Zhi Liang and Hai-Lung Tsai
Determination of Vibrational Energy Levels and Transition Dipole Moments of CO₂ Molecules by Density Functional Theory, Zhi Liang and Hai-Lung Tsai
Development of an Interdisciplinary Laboratory Curriculum for Emerging Product Manufacturing, Frank W. Liou
Product Focused Freeform Fabrication Education, Frank W. Liou and Ming-Chuan Leu
Incorporation of Evidences into an Intelligent Computational Argumentation Network for a Web-Based Collaborative Engineering Design System, Xiaoqing Frank Liu, Ekta Khudkhudia, and Ming-Chuan Leu
Aqueous-Based Extrusion of High Solids Loading Ceramic Pastes: Process Modeling and Control, Michael S. Mason, Tieshu Huang, Robert G. Landers, Greg Hilmas, and Ming-Chuan Leu
Hybrid Composites Using Out-Of-Autoclave Process for Aerospace Sub-Structures, V. G. K. Menta, Saikrishna Sundararaman, K. Chandrashekhara, Nam Phan, and T. Nguyen
Exploring the Use of Functional Models in Biomimetic Conceptual Design, Robert L. Nagel, Prem A. Midha, Andrea Tinsley, Robert B. Stone, Daniel A. McAdams, and L. H. Shu
A Signal Grammar to Guide Functional Modeling of Electromechanical Products, Robert L. Nagel, Jayson P. Vucovich, Robert B. Stone, and Daniel A. McAdams
Image Processing, Geometric Modeling and Data Management for Development of a Virtual Bone Surgery System, Qiang Niu, Xiaoyi Chi, Jorge A. Ochoa, and Ming-Chuan Leu
Virtual Bone Surgery, Qiang Niu, Ming-Chuan Leu, and Xiaoyi Chi
Identifying Product Shape Relationships Using Principal Component Analysis, Seth D. Orsborn, Peter Boatwright, and Jonathan Cagan
Automatically Generating Form Concepts According to Consumer Preference: A Shape Grammar Implementation with Software Agents, Seth D. Orsborn and Jonathan Cagan
A Methodology for Creating a Statistically Derived Shape Grammar Composed of Non-Obious Shape Chunks, Seth D. Orsborn, Jonathan Cagan, and Peter Boatwright
Automating the Creation of Shape Grammar Rules, Seth D. Orsborn, Jonathan Cagan, and Peter Boatwright
Quantifying Aesthetic Form Preference in a Utility Function, Seth D. Orsborn, Jonathan Cagan, and Peter Boatwright
Reduced Order Optimal Control Synthesis of a Class of Nonlinear Distributed Parameter Systems Using Single Network Adaptive Critics, Radhakant Padhi, Prashant Prabhat, and S. N. Balakrishnan
Reduced-Order Suboptimal Control Design for a Class of Nonlinear Distributed Parameter Systems Using POD and Θ-D Techniques, Radhakant Padhi, Ming Xin, and S. N. Balakrishnan
Nitric oxide production from surface recombination of oxygen and nitrogen atoms, Dušan A. Pejaković, Jochen Marschall, Lian Duan, and Maria P. Martin
Formation Control of Car-like Mobile Robots: A Lyapunov Function Based Approach, S. A. Panimadai Ramaswamy and S. N. Balakrishnan
Process Planning Strategies for Solid Freeform Fabrication of Metal Parts, Lan Ren, Todd E. Sparks, Jianzhong Ruan, and Frank W. Liou
Rapid Freeze Prototyping of Investment Cast Thin-Wall Metal Matrix Compostites I - Pattern Build and Molding Parameters, Von Richards, Edward A. Druschitz, Sriram Praneeth Isanaka, Matt Cavins, Tim Hill, and Ming-Chuan Leu
Numerical Study of Energy Utilization in Nozzle/Plume Flow-Fields of High-Speed Airbreathing Vehicles, David W. Riggins, D. Moorhouse, and A. Wilson
Design Parameter Investigation of a Cold-Cathode Penning Ion Source for General Laboratory Applications, Joshua L. Rovey
Dormant Cathode Erosion in a Multiple-Cathode Gridded Ion Thruster, Joshua L. Rovey and A. D. Gallimore
Plasma Properties in the Magnetic Nozzle of an Electron Cyclotron Resonance Plasma Source, Joshua L. Rovey, R. A. Stubbers, B. E. Jurczyk, M. J. Williams, F. T. Manley, and D. N. Ruzic
Direct 3D Layer Metal Deposition, Jianzhong Ruan, Lie Tang, Todd E. Sparks, Robert G. Landers, and Frank W. Liou
Direct 3d Layer Metal Deposition and Toolpath Generation, Jianzhong Ruan, Lie Tang, Todd E. Sparks, Robert G. Landers, and Frank W. Liou
Mixing Effectiveness of Various Damper-Plenum Configurations, Harry J. Sauer, Pankaj Hande, and Fathi Finaish
Annual Business and News: Beginning the 31st Year of the Journal of Guidance, Control, and Dynamics, George T. Schmidt, M. Akella, S. N. Balakrishnan, R. Colgren, J. L. Crassidis, D. B. Doman, F. O. Eke, R. Enns, W. Gawronski, H. B. Hablani, J. Leitner, E. G. Lightsey, P. Lu, M. B. McFarland, C. McInnes, R. G. Melton, J. Mitchell, V. Mukhopadhyay, H. Schaub, J. Z. Sasiadekj, M. B. Subrahmanyam, and K. A. Wise
Modeling and Numerical Simulation of Magnetic Field Coupled Electrochemical Processes, Debamoy Sen, Kakkattukuzhy M. Isaac, and Nicholas Leventis
Thermal Contact Resistance (TCR)/Thermal Contact Conductance (TCC), John W. Sheffield and Harry J. Sauer Jr.
Reinforcement Learning Based Dual-Control Methodology for Complex Nonlinear Discrete-Time Systems with Application to Spark Engine EGR Operation, Peter Shih, Brian C. Kaul, Jagannathan Sarangapani, and J. A. Drallmeier
Analysis of Jet Fuel Reforming for Solid Oxide Fuel Cell Applications in Auxiliary Power Units, Liming Shi and David J. Bayless
A Model of Steam Reforming of Iso-Octane: The Effect of Thermal Boundary Conditions on Hydrogen Production and Reactor Temperature, Liming Shi, David J. Bayless, and Michael E. Prudich
Direct-to-Part Machining Waste Recycling using Laser Metal Deposition, Todd E. Sparks and Frank W. Liou
