Submissions from 2012
Integrated Analysis for the Design of Tps based on Variable Transpiration Cooling for Hypersonic Cruise Vehicles, S. Gulli, L. Maddalena, and Serhat Hosder
Variable Transpiration Cooling: A New Solution for the Thermal Management of Hypersonic Vehicles, S. Gulli, L. Maddalena, and Serhat Hosder
Effect of Different Graphite Materials on the Electrical Conductivity and Flexural Strength of Bipolar Plates Fabricated Using Selective Laser Sintering, Nannan Guo and Ming-Chuan Leu
Experimental Study of Polymer Electrolyte Membrane Fuel Cells using a Graphite Composite Bipolar Plate Fabricated by Selective Laser Sintering, Nannan Guo and Ming-Chuan Leu
Inherent and Model-Form Uncertainty Analysis for CFD Simulation of Synthetic Jet Actuators, Daoru Frank Han and Serhat Hosder
Impact Time and Angle Guidance with Sliding Mode Control, Nathan Harl and S. N. Balakrishnan
Low-Thrust Control of Lunar Orbits, N. Harl and Henry J. Pernicka
Ultrasonic Underwater Transmission of Composite Turbine Blade Structural Health, A. Heckman, Joshua L. Rovey, K. Chandrashekhara, Steve Eugene Watkins, Rajiv S. Mishra, and Daniel S. Stutts
Surface-Enhanced Raman Spectroscopy Using Gold-Coated Horizontally Aligned Carbon Nanotubes, Xiang Nan He, Yang Gao, Masoud Mahjouri-Samani, P. N. Black, J. Allen, M. Mitchell, Wei Xiong, Yunshen Zhou, Lan Jiang, and Yongfeng Lu
Mass Spectrometry of Solid Samples in Open Air Using Combined Laser Ionization and Ambient Metastable Ionization, Xiang Nan He, Zhi Qiang Xie, Yang Gao, W. Hu, L. B. Guo, Lan Jiang, and Yongfeng Lu
An Optimal Tracking Approach to Formation Control of Nonlinear Multi-Agent Systems, Ali Heydari and S. N. Balakrishnan
Approximate Closed-Form Solutions to Finite-Horizon Optimal Control of Nonlinear Systems, Ali Heydari and S. N. Balakrishnan
Decentralized Control of Nonlinear Multi-Agent Systems Using Single Network Adaptive Critics, Ali Heydari and S. N. Balakrishnan
Optical Field Enhancement in Nanoscale Slot Waveguides of Hyperbolic Metamaterials, Y. He, S. He, and Xiaodong Yang
Giant Transverse Optical Forces in Nanoscale Slot Waveguides of Hyperbolic Metamaterials, Yingran He, Sailing He, Jie Gao, and Xiaodong Yang
Nanoscale Metamaterial Optical Waveguides with Ultrahigh Refractive Indices, Yingran He, Sailing He, Jie Gao, and Xiaodong Yang
Stochastic Response Surfaces Based on Non-Intrusive Polynomial Chaos for Uncertainty Quantification, Serhat Hosder
Uncertainty and Sensitivity Analysis for Reentry Flows with Inherent and Model-Form Uncertainties, Serhat Hosder and Benjamin R. Bettis
Graphene Microtubings: Controlled Fabrication and Site-Specific Functionalization, Chuangang Hu, Yang Zhao, Huhu Cheng, Yanhong Wang, Zelin Dong, Changcheng Jiang, Xiangquan Zhai, Lan Jiang, and Liangti Qu
Study the Shielding Gas Effects on Transport Phenomena in GMAW Arc, J. Hu, Z. H. Rao, S. M. Liao, and Hai-Lung Tsai
Modeling of the Transport Phenomena in Metal Transfer and Weld Formation of GMAW under the Shielding of Ar-He Mixtures, J. Hu, Z. H. Rao, and Hai-Lung Tsai
Experimental Investigation of Formation Time in Single-Gap Pseudospark Discharge, J. Hu and Joshua L. Rovey
Experimental Investigations of High Voltage Pulsed Pseudospark Discharge and Intense Electron Beams, J. Hu and Joshua L. Rovey
Does Access to Expert Knowledge Allow Students to Better Assess Risk?, Ryan S. Hutcheson and Katie Grantham
Function-Based Behavioural Modelling, Ryan S. Hutcheson, Daniel A. McAdams, and Irem Y. Tumer
Reliability Analysis for Hydrokinetic Turbine Blades, Zhen Hu and Xiaoping Du
Time-Dependent Reliability Analysis by a Sampling Approach to Extreme Values of Stochastic Processes, Zhen Hu and Xiaoping Du
Design of Metallic Bipolar Plates for PEM Fuel Cells, Sriram Praneeth Isanaka, Austin Das, and Frank W. Liou
The Applications of Additive Manufacturing Technologies in Cyber-Enabled Manufacturing Systems, Sriram Praneeth Isanaka and Frank W. Liou
Stability Analysis of Fluid-Conveying Pipes with Supported Ends, J. Jin, Y. Zhang, and Xiaodong Yang
Ergonomic Analysis of Fastening Vibration Based on ISO Standard 5349 (2001), Akul Joshi, Ming-Chuan Leu, and Susan L. Murray
Determination of the Emissions from an Aircraft Auxiliary Power Unit (APU) During the Alternative Aviation Fuel Experiment (AAFEX), John S. Kinsey, Michael T. Timko, Scott Christopher Herndon, Ezra Wood, Zhenong Yu, Richard Charles Miake-Lye, Prem Lobo, Philip D. Whitefield, Donald E. Hagen, Changlie Wey, Bruce E. Anderson, Andreas J. Beyersdorf, Charles H. Hudgins, K. Lee Thornhill, Edward Winstead, Robert Howard, Dan I. Bulzan, Kathleen B. Tacina, and W. Berk Knighton
Phase Resolved Near-Field Mode Imaging for the Design of Frequency-Selective Surfaces, Edward C. Kinzel, J. C. Ginn, R. L. Olmon, D. J. Shelton, B. A. Lail, I. Brenner, M. B. Sinclair, M. B. Raschke, and G. D. Boreman
Effect of Material, Process Parameters, and Simulated Body Fluids on Mechanical Properties of 13-93 Bioactive Glass Porous Constructs Made by Selective Laser Sintering, Krishna C. R. Kolan, Ming-Chuan Leu, Greg Hilmas, and Mariano Velez
Air Impacts From Three Alternatives For Producing JP-8 Jet Fuel, Ketwalee Kositkanawuth, Roja Haritha Gangupomu, Melanie L. Sattler, Brian H. Dennis, Frederick M. MacDonnell, Richard Billo, and John W. Priest
PEM Fuel Cell Basics and Computational Modeling, Ümit Özgür Köylü, Steven F. Rodgers, and Scott Erwin Grasman
Freeze-Form Extrusion Fabrication of Functionally Graded Materials, Ming-Chuan Leu, Bradley K. Deuser, Lie Tang, Robert G. Landers, Greg Hilmas, and Jeremy Lee Watts
Investigation of Laser Sintering for Freeform Fabrication of Zirconium Diboride Parts, Ming-Chuan Leu, Shashwatashish Pattnaik, and Greg Hilmas
Freeze-Form Extrusion Fabrication of Functionally Graded Material Composites using Zirconium Carbide and Tungsten, Ang Li, Aaron S. Thornton, Bradley K. Deuser, Jeremy Lee Watts, Ming-Chuan Leu, Greg Hilmas, and Robert G. Landers
A Method to Generate Pressure Gradients for Molecular Simulation of Pressure-Driven Flows in Nanochannels, Zhi Liang and Hai-Lung Tsai
Effect of Interlayer between Semiconductors on Interfacial Thermal Transport, Zhi Liang and Hai-Lung Tsai
Reduction of Solid-Solid Thermal Boundary Resistance by Inserting an Interlayer, Zhi Liang and Hai-Lung Tsai
A Method to Generate Pressure Gradients for Molecular Simulation of Pressure-Driven Flows in Nanochannels, Z. Liang and Hai-Lung Tsai
Effect of Interlayer between Semiconductors on Interfacial Thermal Transport, Z. Liang and Hai-Lung Tsai
Reduction of Solid-Solid Thermal Boundary Resistance by Inserting an Interlayer, Z. Liang and Hai-Lung Tsai
High Sensitivity Machzehnder Interferometer Sensors Based on Concatenated Ultra-Abrupt Tapers on Thinned Fibers, Benye Li, Lan Jiang, Sumei Wang, Jinpeng Yang, Mengmeng Wang, and Qianghua Chen
Structural Optimization of Laminated Composite Blade Using Particle Swarm Optimization, H. Li and K. Chandrashekhara
Fatigue Life Investigation for a Medium Scale Composite Hydrokinetic Turbine Blade, H. Li, K. Chandrashekhara, and Rajiv S. Mishra
Modeling, Analysis and Simulation of Paste Freezing in Freeze-Form Extrusion Fabrication, Mingyang Li, Robert G. Landers, and Ming-Chuan Leu
Interactions of an Additive Manufacturing Program with Society, Frank W. Liou, Ming-Chuan Leu, and Robert G. Landers
Slightly Cross-Linked Polyrotaxanes Made by Linking Α-Cyclodextrins Entrapped in Polyrotaxanes Using Hexamethylene Diisocyanate, Shuo Li, Jin Wang, Lan Jiang, Lin Ye, Ai-ying Zhang, and Zeng-guo Feng
Three-Dimensional Graphene-Polypyrrole Hybrid Electrochemical Actuator, Jiang Liu, Z. Wang, Yang Zhao, Huhu Cheng, Chuangang Hu, Lan Jiang, and Liangti Qu
Nonliear Dynamic Behaviors of an Axially Acceleratinglarge Deflection Thin Plate, J.-T. Liu, Xiaodong Yang, and B.-C. Wen
Bi-Material Attachment through a Compliant Interfacial System at the Tendon-To-Bone Insertion Site, Yanxin Liu, Stavros Thomopoulos, Victor Birman, Jr-Shin Li, and Guy M. Genin
Erratum: Bi-Material Attachment through a Compliant Interfacial System at the Tendon-To-Bone Insertion Site, Yanxin Liu, Stavros Thomopoulos, Victor Birman, Jr-Shin Li, and Guy M. Genin
Transient Localized Material Properties Changes by Ultrafast Laser-Pulse Manipulation of Electron Dynamics in Micro/Nano Manufacturing, X. Li, Lan Jiang, C. Wang, and Hai-Lung Tsai
Measurement and Analysis of Aircraft Engine PM Emissions Downwind of an Active Runway at the Oakland International Airport, Prem Lobo, Donald E. Hagen, and Philip D. Whitefield
Impact of Alternative Fuels on Emissions Characteristics of a Gas Turbine Engine. Part 1: Gaseous and Particulate Matter Emissions, Prem Lobo, Lucas Rye, Paul I. Williams, Simon Christie, I. Uryga-Bugajska, Chris W. Wilson, Donald E. Hagen, Philip D. Whitefield, Simon Blakey, H. Coe, David W. Raper, and M. Pourkashanian
Robust Nonlinear Observer for State of Charge Estimation of Li-Ion Batteries, Nima Lotfi and Robert G. Landers
Robust Mechanism Synthesis with Truncated Dimension Variables and Interval Clearance Variables, Kang Luo, Jinge Wang, and Xiaoping Du
Advantages of GaN Based Light-Emitting Diodes with a P-InGaN Hole Reservoir Layer, Taiping Lu, Shuti Li, Chao Liu, Kang Zhang, Yiqin Xu, Jinhui Tong, Lejuan Wu, Hailong Wang, Xiaodong Yang, Yian Yin, Guowei Xiao, and Yugang Zhou
Halo Orbits Near Small Bodies in the Elliptic Restricted Problem, B. Mahajan and Henry J. Pernicka
Optimal Tracking Control of Motion Systems, Anusha Mannava, S. N. Balakrishnan, Lie Tang, and Robert G. Landers
Exergy Analysis of a Turbojet Engine Modeled as a Lumped Parameter System, C. D. Marley and David W. Riggins
Numerical and Experimental Efforts to Explain Delayed Gas Breakdown in θ -Pinch Devices with Bias Magnetic Field, Warner C. Meeks and Joshua L. Rovey
On the Delayed Gas Breakdown in a Ringing Theta-Pinch with Bias Magnetic Field, Warner C. Meeks and Joshua L. Rovey
Preliminary Findings from Efforts to Model Pulsed Inductive Theta-Pinch Plasmas Via Particle-In-Cell, Warner C. Meeks and Joshua L. Rovey
Analysis of a Fixed-Guided Compliant Beam with an Inflection Point Using the Pseudo-Rigid-Body Model (Prbm) Concept, Ashok Midha, Sushrut G. Bapat, A. Mavanthoor, and V. Chinta
Capillary Extraction of the Ionic Liquid [Bmim][DCA] for Variable Flow Rate Operations, S. W. Miller, B. D. Prince, and Joshua L. Rovey
Hierarchical Optimal Force-Position Control of Complex Manufacturing Processes, Hesam Zomorodi Moghadam, Robert G. Landers, and S. N. Balakrishnan
Impact Characterization of Polyurethane Composites Manufactured Using Vacuum Assisted Resin Transfer Molding, M. Mohamed, K. Chandrashekhara, Rama Bhadra Raju Vuppalapati, S. Hawkins, and Thomas P. Schuman
Design of a Hydrogen Community, Vijay Mohan, Aanchal Shah, John W. Sheffield, and Kevin B. Martin
A Nanoporous Silicon Nitride Membrane Using A Two-step Lift-off Pattern Transfer With Thermal Nanoimprint Lithography, Bhargav P. Nabar, Zeynep Çelik-Butler, Brian H. Dennis, and Richard E. Billo
Out-of-Autoclave Sandwich Structure: Processing Study, S. Nagarajan, V. G. K. Menta, K. Chandrashekhara, T. R. Berkel, J. Sha, P. Wu, and D. Pfitzinger
Out-Of-Autoclave Sandwich Structure Processing Study, Sriram Nagarajan, V. G. K. Menta, K. Chandrashekhara, Thomas R. Berkel, J. Sha, P. Wu, and D. Pfitzinger
Hybrid Manufacturing System Modeling and Development, Jacquelyn K. S. Nagel and Frank W. Liou
Adjusting a Level At Which to Generate a New Tone with a Current Generated Tone, M. Nakagawa and Shun Takai
Electronic Musical Instrument, M. Nakagawa and Shun Takai
Generating Tones with a Vibrato Effect, M. Nakagawa and Shun Takai
Electronic musical instrument to generate musical tones to imitate a stringed instrument, M. Nakagawa, Shun Takai, and Shun Takai
Multifunctional Thermal Barrier Coating in Aerospace Sandwich Panels, Cody H. Nguyen, K. Chandrashekhara, and Victor Birman
Fundamental Processes of DBD Plasma Actuators Operating At High Altitude, T. G. Nichols and Joshua L. Rovey
Evaluation of the Effects of Corrosion on Fatigue Life of Clad Aluminum Alloy 2024-T3-Riveted Lap Joints with Acoustic Emission Monitoring, Anthony Chukwujekwu Okafor and C. Nnadili
Pre-Ionization Plasma in a FRC Test Article, R. A. Pahl and Joshua L. Rovey
Morphological Transition of ZnO Nanostructures Influenced by Magnesium Doping, T. Premkumar, Yunshen Zhou, Yang Gao, K. Baskar, Lan Jiang, and Yongfeng Lu
Production of Few-Layer Graphene Through Liquid-Phase Pulsed Laser Exfoliation of Highly Ordered Pyrolytic Graphite, Min Qian, Yunshen Zhou, Yang Gao, T. Feng, Z. Sun, Lan Jiang, and Yongfeng Lu
Determination of Equilibrium Wire-Feed-Speeds for Stable Gas Metal Arc Welding, Z. H. Rao, J. Zhou, and Hai-Lung Tsai
An Approach to Study Impact of Public Policy, Exogenous Variables, and Vehicle Design on Greenhouse Gas Emission, S. S. Razu and Shun Takai
Mission-Integrated Exergy Analysis for Hypersonic Vehicles; Methodology and Application, David W. Riggins, J. Camberos, and M. Wolff
Instrumented Composite Turbine Blade for Health Monitoring, K. E. Robison, Steve Eugene Watkins, J. Nicholas, K. Chandrashekhara, and Joshua L. Rovey
Three Dimensional Simulation of Moisture Diffusion in Thick Composites, N. Roe, Z. Huo, K. Chandrashekhara, and A. Buchok
Advanced Moisture Modeling of Polymer Composites, N. Roe, Z. Huo, K. Chandrashekhara, A. Buchok, and R. A. Brack
Inadequacy of Optical Smoke Measurements for Characterization of Non-Light Absorbing Particulate Matter Emissions from Gas Turbine Engines, Lucas Rye, Prem Lobo, Paul I. Williams, I. Uryga-Bugajska, Simon Christie, Chris W. Wilson, Donald E. Hagen, Philip D. Whitefield, Simon Blakey, H. Coe, David W. Raper, and M. Pourkashanian
Modification of Boron Nitride Ceramic to Replicate Hall Effect Thruster Surface Wear, A. J. Satonik and Joshua L. Rovey
Magnetometer-Only Attitude Determination Using Novel Two-Step Kalman Filter Approach, J. D. Searcy and Henry J. Pernicka
High Performance Bulk Planar 20nm CMOS Technology for Low Power Mobile Applications, H. Shang, S. Jain, E. Josse, E. Alptekin, M. H. Nam, S. W. Kim, K. H. Cho, I. Kim, Y. Liu, Xiaodong Yang, and X. Wu
Contact Model of a Ring-Type Traveling Wave Ultrasonic Motor, M. S. Shetty, Lokeswarappa R. Dharani, Jun Wei, and Daniel S. Stutts
Analysis of Laminated Architectural Glazing Subjected to Wind Load and Windborne Debris Impact, Daniel S. Stutts and W. Soedel
Loss Enhanced Transmission and Collimation in Anisotropic Epsilon-Near-Zero Metamaterials, L. Sun, S. Feng, and Xiaodong Yang
Integrated Optical Devices Based on Broadband Epsilon-Near-Zero Meta-Atoms, L. Sun, K. W. Yu, and Xiaodong Yang
