Submissions from 2015
Residual Stress and Deformation Modelling for Metal Additive Manufacturing Processes, Heng Liu, Todd E. Sparks, Frank W. Liou, and David M. Dietrich
Numerical Investigation of Weld Pool Behaviors and Ripple Formation for a Moving GTA Welding with Pulsed Currents, J. W. Liu, Z. H. Rao, S. M. Liao, and Hai-Lung Tsai
Methods of Extrusion on Demand for High Solids Loading Ceramic Paste in Freeform Extrusion Fabrication, Wenbin Li, Amir Ghazanfari, Ming-Chuan Leu, and Robert G. Landers
Fabrication of CdTe Nanorod Arrays Over Large Area Through Patterned Electrodeposition for Efficient Solar Energy Conversion, Wipula P. Liyanage, Jacob S. Wilson, Edward C. Kinzel, Brandon K. Durant, and Manashi Nath
Formation of Linked Nanostructure-Textured Mound-Shaped Microstructures on Stainless Steel Surface via Femtosecond Laser Ablation, Y. Li, Z. Cui, W. Wang, C. H. Lin, and Hai-Lung Tsai
Evaluation of Non-volatile Particulate Matter Emission Characteristics of an Aircraft Auxiliary Power Unit with Varying Alternative Jet Fuel Blend Ratios, Prem Lobo, Simon Christie, Bhupendra Khandelwal, Simon G. Blakey, and David W. Raper
Measurement of Aircraft Engine Non-Volatile PM Emissions: Results of the Aviation-Particle Regulatory Instrumentation Demonstration Experiment (A-PRIDE) 4 Campaign, Prem Lobo, Lukas Durdina, Gregory J. Smallwood, Theodor Rindlisbacher, Frithjof Siegerist, Elizabeth A. Black, Zhenhong Yu, Amewu A. Mensah, Donald E. Hagen, Richard C. Miake-Lye, Kevin A. Thomson, Benjamin T. Brem, Joel C. Corbin, Manuel Abegglen, Berko Sierau, Philip D. Whitefield, and Jing Wang
PM Emissions Measurements of In-Service Commercial Aircraft Engines During the Delta-Atlanta Hartsfield Study, Prem Lobo, Donald E. Hagen, Philip D. Whitefield, and David W. Raper
Limitations in the Use of Small-Length Flexural Pivot in a Pseudo-Rigid-Body Model, Vamsi Lodagala, Krutika Karthik, and Ashok Midha
Electrochemical Model-Based Adaptive Estimation of Li-Ion Battery State of Charge, Nima Lotfi, Robert G. Landers, Jie Li, and Jonghyun Park
Thermal Management and Voltage Stabilization in Air-Forced Open-Cathode Fuel Cells, N. Lotfi, H. Zomorodi, and Robert G. Landers
Solid Freeform Fabrication of Transparent Fused Quartz using a Filament Fed Process, J. Luo, L. J. Gilbert, C. Qu, B. Morrow, Douglas A. Bristow, Robert G. Landers, J. Goldstein, A. Urbas, and Edward C. Kinzel
Wire-Fed Additive Manufacturing of Transparent Glass Parts, Junjie Luo, Luke Gilbert, Chuang Qu, Jacob Wilson, Douglas A. Bristow, Robert G. Landers, and Edward C. Kinzel
Control of Fluid Dynamics by Nanoparticles in Laser Melting, Chao Ma, Lianyi Chen, Jiaquan Xu, Jingzhou Zhao, and Xiaochun Li
Three-Dimensional Phenomena in Microbubble Acoustic Streaming, A. G. Marin, M. Rossi, B. Rallabandi, Cheng Wang, S. Hilgenfeldt, and C. J. Kahler
Identification of the Dominant Combustion Characteristics on Homogeneous Charge Compression Ignition Engine Noise, J. A. Massey and J. A. Drallmeier
Time-resolved Argon Theta-pinch Plasma Properties by Line Ratio Method with Collisional-radiative Model, Warner C. Meeks and Joshua L. Rovey
Hybrid Manufacturing Process of SiC/SiC Composite using Preceramic Polymer, Robert R. Meinders, James Nicholas, and K. Chandrashekhara
Analysis of a Fixed-Guided Compliant Beam with an Inflection Point Using the Pseudo-Rigid-Body Model Concept, Ashok Midha, Sushrut G. Bapat, Adarsh Mavanthoor, and Vivekananda Chinta
Mechanical Advantage of a Compliant Mechanism and Significant Factors Affecting IT, Using the Pseudo-Rigid-Body Model Approach, Ashok Midha, Sushrut G. Bapat, and Prem Midha
Development of a Methodology for Pseudo-Rigid-Body Models of Compliant Beams with Inserts, and Experimental Validation, Ashok Midha, Raghvendra S. Kuber, and Sushrut G. Bapat
Mode Shapes in Compliant Mechanisms, and a Procedure to Identify Appropriate Pseudo-Rigid-Body Model Type, Ashok Midha and Pratheek Bagivalu Prasanna
Personal Preference and Trade-Off Based Additive Manufacturing Web Service Selection, Venkata P. Modekurthy, Kenneth K. Fletcher, Xiaoqing Frank Liu, and Ming-Chuan Leu
Design and Implementation of a Broker for Cloud Additive Manufacturing Services, Venkata Prashant Modekurthy, Kenneth Kofi Fletcher, Xiaoqing Frank Liu, and Ming-Chuan Leu
Manufacturing and Characterization of Polyurethane Based Sandwich Composite Structures, M. Mohamed, S. Anandan, Z. Huo, Victor Birman, Jeffery S. Volz, and K. Chandrashekhara
Characterization of Polyurethane Composites Manufactured Using Vacuum Assisted Resin Transfer Molding, Mazari Bouziane Mohamed, Ramabhadraraju R. Vuppalapati, V. P. Bheemreddy, K. Chandrashekhara, and Thomas P. Schuman
Manufacturing and Performance Evaluation of Polyurethane Composites using One-Part and Two-Part Resin Systems, M. Mohamed, S. Hawkins, and K. Chandrashekhara
Evaluation of Low-Velocity Impact Properties for Stitched Foam-Core Polyurethane Sandwich Structural Panel, Mohaned M. Mohamed, Gurjot S. Dhaliwal, Zhen Huo, and K. Chandrashekhara
Use of Traffic Simulators to Determine Driver Response to Work Zone Configurations, Samareh Moradpour, Shuang Wu, Suzanna Long, Ming-Chuan Leu, Dincer Konur, and Ruwen Qin
Suppression of the Spherically Converging Magnetohydrodynamic Richtmyer-Meshkov Instablity in an Octahedrally Symmetric Seed Magnetic Field, Wouter Mostert, Vincent Wheatley, Dale I. Pullin, and Ravi Samtaney
Effects of Magnetic Fields on Magnetohydrodynamic Cylindrical and Spherical Richtmyer-Meshkov Instability, Wouter Mostert, Vincent Wheatley, Ravi Samtaney, and Dale I. Pullin
Electronic Musical Instrument to Generate Musical Tones to Imitate a Stringed Instrument, Mizuki Nakagawa, Ikuo Tanaka, and Shun Takai
Component Level Tensile Testing of Press & Sinter Steels, Joseph William Newkirk, Tarak A. Amine, and Frank W. Liou
Effects of DC Preionization Voltage and Radial Location on Pulsed Inductive Plasma Formation, Ryan Alan Pahl and Joshua L. Rovey
Effect of a DC Preionization Source on Energy Deposition in a Pulsed Inductive Plasma, Ryan A. Pahl and Joshua L. Rovey
A Sequential Iteration Algorithm for Reliability Analysis with Random and Dependent Interval Variables, Baisong Pan, Shaojun Xie, Xiaoping Du, and Lihua Liang
Single Crystal Formation in Micro/Nano-Confined Domains by Melt-Mediated Crystallization without Seeds, Heng Pan and Wan Shou
Hardware-In-Loop and Flight Testing of Modified State Observer based Adaptation for a General Aviation Aircraft, Venkatasubramani S. R. Pappu, James E. Steck, Bryan S. Steele, Karthikeyan Rajagopal, and S. N. Balakrishnan
Study of the Effect of Electrode Microstructures on Battery Performance, Jonghyun Park, Sangmin Lee, John Hoffmann, and Ann Marie Sastry
Significant Capacity and Cycle-Life Improvement of Lithium-Ion Batteries through Ultrathin Conductive Film Stabilized Cathode Particles, Rajankumar L. Patel, Hui Xie, Jonghyun Park, Hooman Yaghoobnejad Asl, Amitava Choudhury, and Xinhua Liang
An Active-passive Networked Multiagent Systems Approach to Environment Surveillance, John Daniel Peterson and Tansel Yucelen
Exploitation of Heterogeneity in Distributed Sensing: An Active-passive Networked Multiagent Systems Approach, John Daniel Peterson, Tansel Yucelen, Girish Chowdhary, and Suresh Kannan
Model for Longitudinal Perch Maneuvers of a Fixed-Wing Unmanned Aerial Vehicle, Michael G. Puopolo and Jamey D. Jacob
Velocity Control of a Cylindrical Rolling Robot by Surface-Morphing, Michael G. Puopolo and Jamey D. Jacob
Plasmonic Force Space Propulsion, Joshua L. Rovey, Paul Daniel Friz, C. Hu, M. S. Glascock, and Xiaodong Yang
High Strain Rate Hot Deformation of Steels: Measurement and Simulation, Seth A. Rummel, David C. Van Aken, Ronald J. O'Malley, X. Wang, and K. Chandrashekhara
Effective Elastic Properties of a Composite Containing Multiple Types of Anisotropic Ellipsoidal Inclusions, with Application to the Attachment of Tendon to Bone, F. Saadat, Victor Birman, S. Thomopoulos, and G. M. Genin
A Model Predictive Repetitive Process Control Formulation for Additive Manufacturing Processes, Patrick M. Sammons, Douglas A. Bristow, and Robert G. Landers
DC-Gain Layer-To-Layer Stability Criterion in Laser Metal Deposition Processes, Patrick M. Sammons, Douglas A. Bristow, and Robert G. Landers
A Real-Time American Sign Language Word Recognition System Based on Neural Networks and a Probabilistic Model, Neelesh Sarawate, Ming-Chuan Leu, and Cemil Oz
Comparisons of Performances and Liquid Water Distributions within Bio-Inspired and Single-Serpentine PEM Fuel Cell Channels, Bhaskar P. Saripella, Ümit Özgür Köylü, and Ming-Chuan Leu
Experimental and Computational Evaluation of Water Management and Performance Characteristics of a Bio-Inspired PEM Fuel Cell, Venkatanaga Bhaskar Prakash Saripella, Ming-Chuan Leu, and Ümit Özgür Köylü
Uncertainty Quantification of Turbulence Model Closure Coefficients for Transonic Wall-Bounded Flows, J. Schaefer, Serhat Hosder, T. West, Christopher Rumsey, Jan-Renee Carlson, and William Kleb
Application of a Novel Scalability Notion in Adaptive Control to Various Adaptive Control Frameworks, Simon P. Schatz, Tansel Yucelen, Benjamin Gruenwald, and Florian Holzapfel
Multi-Fidelity Robust Aerodynamic Design Optimization under Mixed Uncertainty, Harsheel R. Shah, Serhat Hosder, Slawomir Koziel, Yonatan Afework Tesfahunegn, and Leifur Leifsson
Multi-Fidelity Robust Aerodynamic Design Optimization under Mixed Uncertainty, Harsheel R. Shah, Serhat Hosder, Slawomir Koziel, Yonatan A. Tesfahunegn, and Leifur Leifsson
A Mixed Uncertainty Quantification Approach using Evidence Theory and Stochastic Expansions, Harsheel R. Shah, Serhat Hosder, and Tyler Winter
Quantification of Margins and Mixed Uncertainties Using Evidence Theory and Stochastic Expansions, Harsheel R. Shah, Serhat Hosder, and Tyler Winter
Component-/Structure-Dependent Elasticity of Solid Electrolyte Interphase Layer in Li-Ion Batteries: Experimental and Computational Studies, Hosop Shin, Jonghyun Park, Sangwoo Han, Ann Marie Sastry, and Wei Lu
Degradation of the Solid Electrolyte Interphase Induced by the Deposition of Manganese Ions, Hosop Shin, Jonghyun Park, Ann Marie Sastry, and Wei Lu
Effects of Fluoroethylene Carbonate (FEC) on Anode and Cathode Interfaces At Elevated Temperatures, Hosop Shin, Jonghyun Park, Ann Marie Sastry, and Wei Lu
Effect of Al/Ni Ratio, Heat Treatment on Phase Transformations and Microstructure of AlₓFeCoCrNi₂₋ₓ (x=0.3, 1) High Entropy Alloys, Harihar Rakshit Sistla, Joseph William Newkirk, and Frank W. Liou
A Novel Interactive Exoskeletal Robot for Overground Locomotion Studies in Rats, Yun Seong Song and N. Hogan
Nonlocal Effective Medium Analysis in Symmetric Metal-Dielectric Multilayer Metamaterials, L. Sun, Z. Li, T. S. Luk, Xiaodong Yang, and Jie Gao
Diffraction-Free Optical Beam Propagation with Near-Zero Phase Variation in Extremely Anisotropic Metamaterials, L. Sun, Xiaodong Yang, W. Wang, and Jie Gao
6-Month Aortic Valve Implantation of an Off-The-Shelf Tissue-Engineered Valve in Sheep, Zeeshan Syedain, Jay Reimer, Jillian B. Schmidt, Matthew Lahti, James Berry, Richard Bianco, and Robert T. Tranquillo
Evaluations of Engineering Uncertainty Repository, Shun Takai and Xiaoping Du
An Approach to Study Associations between Design Concepts and Design Outcomes, Shun Takai, Marcos Esterman, and Ashok Midha
Modeling and Characterization of Fused Deposition Modeling Tooling for Autoclave Process, Gregory Taylor, Xin Wang, K. P. Motaparti, S. Meng, Ming-Chuan Leu, and K. Chandrashekhara
Modeling and Characterization of Fused Deposition Modeling Tooling for Autoclave Process, G. Taylor, X. Wang, K. P. Motaparti, S. Meng, and M. C. Leu
Application of Direct and Surrogate-Based Optimization to Two-Dimensional Benchmark Aerodynamic Problems: A Comparative Study, Yonatan A. Tesfahunegn, Slawomir Koziel, Joe-Ray Gramanzini, Serhat Hosder, Zhong-Hua Han, and Leifur Leifsson
Freeform Extrusion Fabrication of Titanium Fiber Reinforced Bioactive Glass Scaffolds, Albin Thomas, Krishna C. R. Kolan, Ming-Chuan Leu, and Greg Hilmas
An Interoperable System For Automated Diagnosis Of Cardiac Abnormalities From Electrocardiogram Data, Thidarat Tinnakornsrisuphap and Richard E. Billo
Control of Multiagent Formations: A Multiplex Information Networks-Based Approach, Dung Tran and Tansel Yucelen
Evaluation of Sandwich Panels with Various Polyurethane Foam-Cores and Ribs, H. Tuwair, M. Hopkins, Jeffery S. Volz, Mohamed ElGawady, M. Mohamed, K. Chandrashekhara, and Victor Birman
Finding an Optimal Driving Strategy for an Electric Bus based on Operational Data, Warren Vaz, Arup K. Nandi, and Ümit Özgür Köylü
Electric Vehicle Range Prediction for Constant Speed Trip using Multi-Objective Optimization, W. Vaz, A. K. Nandi, Robert G. Landers, and Ümit Özgür Köylü
Kinetic Simulations of Plasma Plume Potential in a Vacuum Chamber, Joseph J. Wang, Daoru Frank Han, and Yuan Hu
Modeling and Simulation of Hot Rolling using Nonlinear Material Models, Xin Wang, K. Chandrashekhara, Seth A. Rummel, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Improved Reliability-Based Optimization with Support Vector Machines and its Application in Aircraft Wing Design, Yu Wang, Xiongqing Yu, and Xiaoping Du
A Framework for Large Scale Fused Pellet Modeling (FPM) by an Industry Robot, Zhiyuan Wang, Renwei Liu, Todd E. Sparks, and Frank W. Liou
Stereo Vision Based Hybrid Manufacturing Process for Precision Metal Parts, Z. Wang, L. Renwei, Todd E. Sparks, H. Liu, and Frank W. Liou
Piezoelectric-Based Rotary Electrical Energy Generator for Harvesting Energy from Low and Highly Variable Rotary Motion, Jun Wei and Lian Duan
Quantification of Margins and Uncertainties for Integrated Spacecraft Systems Models, Thomas K. West IV, Serhat Hosder, and Tyler Winter
A Single-Loop Optimization Method for Reliability Analysis with Second Order Uncertainty, Shaojun Xie, Baisong Pan, and Xiaoping Du
High Performance Mg6Zn Nanocomposites Fabricated through Friction Stir Processing, Jiaquan Xu, Chezheng Cao, Shamiparna Das, Lianyi Chen, Chao Ma, Rajiv S. Mishra, and Xiaochun Li
Fabrication of Hierarchical Metallic Nanocomposite Core/Metal Shell Nanostructures by Self-Assembly, Jiaquan Xu, Lianyi Chen, Hongseok Choi, and Xiaochun Li
Near Field Transducer for Heat Assisted Magnetic Recording, Xianfan Xu and Edward C. Kinzel
Coordinated Standoff Flights for Multiple UAVs Via Second-Order Sliding Modes, Takeshi Yamasaki, S. N. Balakrishnan, Hiroyuki Takano, and Isao Yamaguchi
Sliding Mode-Based Intercept Guidance with Uncertainty and Disturbance Compensation, Takeshi Yamasaki, S. N. Balakrishnan, Hiroyuki Takano, and Isao Yamaguchi
Direct Laser Deposition of Ti-6Al-4V from Elemental Powder Blends, Lei Yan, Xueyang Chen, Wei Li, Frank W. Liou, and Joseph William Newkirk
A Study of Mixing in a Magnetohydrodynamic (MHD) Microfluidic Cell By Numerical Simulations, Fangping Yuan and Kakkattukuzhy M. Isaac (Presentation)
A Direct Uncertainty Minimization Framework in Model Reference Adaptive Control, Tansel Yucelen, Benjamin Gruenwald, and Jonathan A. Muse
Adaptive Control with Nonlinear Reference Systems, Tansel Yucelen, Benjamin Gruenwald, Jonathan A. Muse, and Gerardo De La Torre
Control of Networked Multiagent Systems with Uncertain Graph Topologies, Tansel Yucelen, J. Daniel Peterson, and Kevin L. Moore
Structuring Light by Concentric-Ring Patterned Magnetic Metamaterial Cavities, J. Zeng, Jie Gao, T. S. Luk, N. M. Litchinitser, and Xiaodong Yang
Acoustic Radiation from High-Speed Turbulent Boundary Layers in a Tunnel-Like Environment, Chao Zhang and Lian Duan
A Microstructure and Hardness Study of Functionally Graded Materials Ti6Al4V/TiC by Laser Metal Deposition, Jingwei Zhang, Yunlu Zhang, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, and William J. Seufzer
Time-Dependent Reliability Analysis for Function Generation Mechanisms with Random Joint Clearances, Junfu Zhang and Xiaoping Du
Microstructure and Property of TiB-Reinforced Ti Alloy Composites by Laser Metal Deposition, Yunlu Zhang, Jingwei Zhang, Frank W. Liou, and Joseph William Newkirk