Submissions from 2011
Optical Forces in Hybrid Plasmonic Waveguides, Xiaodong Yang, Y. Liu, R. F. Oulton, X. Yin, and X. Zhang
Analysis of Parasitic Resistance in Double Gate FinFETs with Different Fin Lengths, Xiaodong Yang, K. Maitra, C. Yeh, P. Zeitzoff, M. Raymond, P. Kulkarni, M. Wang, T. Yamashita, V. S. Basker, T. E. Standaert, and S. Samavedam
Effect of Thickness on the Structural, Electrical and Optical Properties of ZnO Films Deposited by MBE, Xiaodong Yang, S. Su, X. Yi, and T. Mei
Linear Magnetoresistance Effect in Lateral Magnetic Superlattices, Xiaodong Yang, R. Wang, and H. Yan
Experimental Demonstration of Three-Dimensional Nanoscale Metamaterial Optical Cavities, Xiaodong Yang, J. Yao, J. Rho, X. Yin, and X. Zhang
Electro-Hydraulic Piston Control Using Neural MRAC Based on a Modified State Observer, Yang Yang, S. N. Balakrishnan, Lie Tang, and Robert G. Landers
Three-Dimensional Nanometer-Scale Optical Cavities of Indefinite Medium, J. Yao, Xiaodong Yang, X. Yin, G. Bartal, and X. Zhang
Strain-Insensitive Optical Fiber Mach-Zehnder Interferometric Temperature Sensor, Yingyu Yu, Lan Jiang, Sumei Wang, Jinpeng Yang, and Benye Li
Online Near Optimal Control of Unknown Nonaffine Systems with Application to HCCI Engines, Hassan Zargarzadeh, Salem Jagannathan, and J. A. Drallmeier
Time-Dependent Reliability Analysis for Function Generator Mechanisms, Junfu Zhang and Xiaoping Du
Time-Dependent Probabilistic Synthesis for Function Generator Mechanisms, Junfu Zhang, Jinge Wang, and Xiaoping Du
An All-Optical Fiber Sensor Fabricated by a Femtosecond Laser for Temperature Sensing, L. Zhao, Lan Jiang, S. Wang, Hai Xiao, Y. Lu, and Hai-Lung Tsai
Modeling of Transport Phenomena and Thermal Stress in Spot Laser Keyhole Welding, J. Zhou, A. Khalilollahli, and Hai-Lung Tsai
Boron Nitride Hall-Effect Thruster Channel Surface Properties Investigation, D. G. Zidar and Joshua L. Rovey
Submissions from 2010
Uncertainty Quantification Integrated to CFD Modeling of Synthetic Jet Actuators, Srikanth Adya, Daoru Frank Han, and Serhat Hosder
Uncertainty Quantification Integrated to the CFD Modeling of Synthetic Jet Actuators, Srikanth Adya, Daoru Frank Han, and Serhat Hosder
Development of a Mechanistic Model for Friction Stir Channeling, Nagarajan Balasubramanian, Rajiv S. Mishra, and K. Krishnamurthy
Development and Validation of a Turbulent-Mix Model for Variable-Density and Compressible Flows, Arindam Banerjee, Robert A. Gore, and Malcolm J. Andrews
Detailed Measurements of a Statistically Steady Rayleigh-Taylor Mixing Layer from Small to High Atwood Numbers, Arindam Banerjee, Wayne N. Kraft, and Malcolm J. Andrews
A Comparison of Case-Based Reasoning and Regression Analysis Approaches for Cost Uncertainty Modeling, K. Banga and Shun Takai
A Numerical Method for Determining Monotonicity and Convergence Rate in Iterative Learning Control, Kira L. Barton, Douglas A. Bristow, and Andrew G. Alleyne
Development of a Low Cost Imaging System for a Laser Metal Deposition Process, Shyam Barua, Todd E. Sparks, and Frank W. Liou
Quantification of Uncertainty in Aerodynamic Heating of a Reentry Vehicle Due to Uncertain Wall and Freestream Conditions, Benjamin R. Bettis and Serhat Hosder
Uncertainty Quantification in Hypersonic Reentry Flows Due to Aleatory and Epistemic Uncertainties, Benjamin R. Bettis and Serhat Hosder
Younger Driver's Evaluation of Vehicle Mounted Attenuator Markings in Work Zones Using a Driving Simulator, Ghulam Bham, Durga Raj Mathur, Ming-Chuan Leu, and M. Vallati
Optimal Iteration-Varying Iterative Learning Control for Systems with Stochastic Disturbances, Douglas A. Bristow
Gaseous and Particulate Emissions Results of the NASA Alternative Aviation Fuel Experiment (AAFEX), Dan I. Bulzan, Bruce E. Anderson, Changlie Wey, Robert P. Howard, Edward L. Winstead, Andreas J. Beyersdorf, Edwin Corporan, Matthew J. DeWitt, Christopher D. Klingshirn, Scott C. Herndon, Richard C. Miake-Lye, Michael T. Timko, Ezra C. Wood, Kathleen B. Tacina, David S. Liscinsky, Donald E. Hagen, Prem Lobo, and Philip D. Whitefield
An Investigation of Numerical Modeling of Transient Heat Conduction in a One-Dimensional Functionally Graded Material, Larry W. Byrd and Victor Birman
A Novel Radioisotope Microbattery Based on Betavoltaic Effect and Work Function, Haiyang Chen, Lan Jiang, Fuchang Zuo, and Min Sun
Three-Dimensional Nonlinear Finite Element Analysis of Hot Radial Forging Process for Large Diameter Tubes, J. Chen, K. Chandrashekhara, Von Richards, and Semen Naumovich Lekakh
Evaluation of Rapid Development System using Eye Tracker, Arun Chintalapati, Hong Sheng, Richard H. Hall, and Robert G. Landers
Comparison of LSV/YSZ and LSV/GDC SOFC Anode Performance in Coal Syngas Containing H₂S, Matthew Cooper, K. Channa R. De Silva, K. Channa R. De Silva, and David J. Bayless
An Online Nonlinear Optimal Controller Synthesis for Aircraft with Model Uncertainties, Jie Ding and S. N. Balakrishnan
A Single Network Approximate Dynamic Programming Based Constrained Optimal Controller for Nonlinear Systems with Uncertainties, Jie Ding and S. N. Balakrishnan
A Cost Function Based Single Network Adaptive Critic Architecture for Optimal Control Synthesis for a Class of Nonlinear Systems, Jie Ding, S. N. Balakrishnan, and F. L. Lewis
Analysis and Prediction of Dual-Mode Chemical and Electric Ionic Liquid Propulsion Performance, Brian R. Donius and Joshua L. Rovey
Direct Numerical Simulation Of Hypersonic Turbulent Boundary Layers With Varying Freestream Mach Number, L. (Lian) Duan, I. Beekman, and M. P. Mart́in
Direct Numerical Simulation Of Hypersonic Turbulent Boundary Layers. Part 2. Effect Of Wall Temperature, L. (Lian) Duan, I. Beekman, and M. P. Martín
System Reliability Analysis with Saddlepoint Approximation, Xiaoping Du
Second-Order Reliability Method with First-Order Efficiency, Xiaoping Du and Junfu Zhang
An Approximation Approach to General Robustness Assessment for Multidisciplinary Systems, Xiaoping Du and Yi Zhang
Impacting Designer Creativity Through It-Enabled Concept Generation, K. English, A. Naim, K. Lewis, S. Schmidt, V. Viswanathan, J. Linsey, D. A. McAdams, and Seth D. Orsborn
14th Design for Manufacturing and the Life Cycle Conference (DFMLC), M. Esterman and Shun Takai
Effect of Lining Non-Linearity on Realized Attenuation of Tonal Noise, Walter Eversman
Effect of Local Impedance Variation and Non-Linearity on Multiple Tone Attenuation, Walter Eversman
Reprint Of: Effect of Lining Non-Linearity on Realized Attenuation of Tonal Noise, Walter Eversman
Influence Of Interactions Between Turbulence And Radiation On Transmissivities In Hypersonic Turbulent Boundary Layers, A. M. Feldick, L. (Lian) Duan, M. F. Modest, M. P. Martín, and D. A. Levin
Thrust Measurement of Dielectric Barrier Discharge Plasma Actuators and Power Requirements for Aerodynamic Control, J. W. Ferry and Joshua L. Rovey
Design and Implementation of a Linear Axis Rapid Development System for Education, Michael Anthony Fleming and Robert G. Landers
Uncertainty Analysis in Laser Deposition Finish Machining Operations, Jomy Francis, Todd E. Sparks, and Frank W. Liou
Weak Exciton-Photon Coupling of PbS Nanocrystals in Air-Slot Mode-Gap Si Photonic Crystal Nanocavities in the Near-Infrared, Jie Gao, Felice Gesuele, Weon-kyu Koh, Christopher B. Murray, Solomon Assefa, and Chee Wei Wong
Demonstration of an Air-Slot Mode-Gap Confined Photonic Crystal Slab Nanocavity with Ultrasmall Mode Volumes, Jie Gao, James F. McMillan, Ming-Chung Wu, Jiangjun Zheng, Solomon Assefa, and Chee Wei Wong
Implement Scheme for Phase Switching Through Quantum Dots in Slow-Light Photonic Crystal Waveguides, Jie Gao and Chee Wei Wong
Numerical Modeling of Cold Weld Formation and Improvement in Gmaw of Aluminum Alloys, H. Guo, J. Hu, and Hai-Lung Tsai
Three-Dimensional Modeling of Gas Metal Arc Welding of Aluminum Alloys, H. Guo, J. Hu, and Hai-Lung Tsai
Effect of Different Graphite Materials on Electrical Conductivity and Flexural Strength of Bipolar Plates Fabricated by Selective Laser Sintering, Nannan Guo and Ming-Chuan Leu
Chip-Scale Integrated Tuning of Slow-Light in All-Optical Multi-EIT Analogue in Photonic Crystal Cavities, T. Gu, S. Kocaman, Xiaodong Yang, J. F. McMillan, M. Yu, D. L. Kwong, and C. W. Wong
Measurement of Refractive Index Change of Optical Fiber Core Induced by Femtosecond Laser Scanning, Y. Han, T. Wei, Hai-Lung Tsai, and Hai Xiao
Sliding Mode Integrated Missile Guidance and Control, Nathan Harl, S. N. Balakrishnan, and C. Phillips
Combined H∞-feedback Control and Iterative Learning Control Design with Application to Nanopositioning Systems, Brian E. Helfrich, Chibum Lee, Douglas A. Bristow, Jingyan Dong, Srinivasa M. Salapaka, Placid M. Ferreira, X. H. Xiao, and Andrew G. Alleyne
Spectroscopic Determination of Rotational Temperature in C₂H₄ /C₂H₂/O₂ Flames for Diamond Growth with and Without Tunable CO₂ Laser Excitation, Xiang Nan He, X. K. Shen, T. Gebre, Zhi Qiang Xie, Lan Jiang, and Yongfeng Lu
Computational-Fluid-Dynamics-Based Clean-Wing Aerodynamic Noise Model for Design, Serhat Hosder, Joseph A. Schetz, William H. Mason, Bernard Grossman, and Raphael T. Haftka
Non-Intrusive Polynomial Chaos Methods for Uncertainty Quantification in Fluid Dynamics, Serhat Hosder and Robert W. Walters
Point-Collocation Nonintrusive Polynomial Chaos Method for Stochastic Computational Fluid Dynamics, Serhat Hosder, Robert W. Walters, and Michael Balch
Freeze Extrusion Fabrication of 13-93 Bioactive Glass Scaffolds for Bone Repair, Tieshu Huang, Nikhil D. Doiphode, M. N. Rahaman, Ming-Chuan Leu, B. Sonny Bal, and D. E. Day
A Hybrid Sensitivity Analysis for Use in Early Design, Ryan S. Hutcheson and Daniel A. McAdams
Conceptual Design of a Formula Hybrid Powertrain System Utilizing Functionality-Based Modeling Tools, Ryan S. Hutcheson and Daniel A. McAdams
Electrochemical MHD for Microfluidics Applications, Kakkattukuzhy M. Isaac, Debamoy Sen, and Nicholas Leventis
Computer Aided Contour Profiling of High Strength Deposits, Sriram Praneeth Isanaka, Amar Bala Sridhar, Frank W. Liou, and Joseph William Newkirk
A Multi-axis Slicing Method for Direct Laser Deposition Process, Divya Kanakanala, Swathi Routhu, Jianzhong Ruan, Xiaoqing Frank Liu, and Frank W. Liou
Functionally Graded Sandwich Panels with Variable Fiber Volume Fraction in the Facings, Tyler J. Keil, Serhat Hosder, and Victor Birman
Solid Oxide Fuel Cell Bi-Layer Anode with Gadolinia-Doped Ceria for Utilization of Solid Carbon Fuel, Isaiah D. Kellogg, Ümit Özgür Köylü, and Fatih Dogan
Time-Domain Demonstrations of Slow-Light in Multi-Coupled Photonic Crystal Cavities, S. Kocaman, Xiaodong Yang, J. F. McMillan, T. Gu, M. Yu, D. L. Kwong, and C. W. Wong
Observations of Temporal Group Delays in Slow-Light Multiple Coupled Photonic Crystal Cavities, S. Kocaman, Xiaodong Yang, J. F. McMillan, M. B. Yu, D. L. Kwong, and C. W. Wong
Selective Laser Sintering and Freeze Extrusion Fabrication of Scaffolds for Bone Repair using 13-93 Bioactive Glass: A Comparison, Krishna C. R. Kolan, Nikhil P. Doiphode, and Ming-Chuan Leu
Selective Laser Sintering of 13-93 Bioactive Glass, Krishna C. R. Kolan, Ming-Chuan Leu, Greg Hilmas, and Mariano Garcia Velez
MEA Manufacturing using an Additive Manufacturing Process to Deposit a Catalyst Pattern in an MEA and Its Impact on Cost Reduction, Nikhil P. Kulkarni, Todd E. Sparks, Gargi Tandra, and Frank W. Liou
On Combined Use of POD Modes and Ritz Vectors for Model Reduction in Nonlinear Structural Dynamics, Nishant Kumar and Thomas D. Burton
Developing Laminar Gravity-Driven Thin Liquid Film Flow Down an Inclined Plane, Hai Lan, J. L. Wegener, Bassem F. Armaly, and J. A. Drallmeier
Optimal Control for Proximity Operations and Docking, D. Lee and Henry J. Pernicka
Optimization of Selective Laser Sintering Process for Fabrication of Zirconium Diboride Parts, Ming-Chuan Leu, Shashwatashish Pattnaik, and Greg Hilmas
Computer Program and Method for Detecting and Predicting Valve Failure in a Reciprocating Compressor, Ming-Chuan Leu, Jagannathan Sarangapani, and Raghuram Puthall Ramesh
Static and Dynamic Stabilities of Fluid Pipes on Elastic Foundation, F. Liang, J.-D. Jin, Xiaodong Yang, and B.-C. Wen
Calculation of Thermophysical Properties for CO2 Gas using an Ab Initio Potential Model, Zhi Liang
Calculation of Thermophysical Properties for CO2 Gas using an Ab Initio Potential Model, Zhi Liang and Hai-Lung Tsai
Molecular Dynamics Simulations of Self-Diffusion Coefficient and Thermal Conductivity of Methane At Low and Moderate Densities, Zhi Liang and Hai-Lung Tsai
Prediction of the Transport Properties of a Polyatomic Gas, Zhi Liang and Hai-Lung Tsai
Prediction of the Transport Properties of a Polyatomic Gas, Zhi Liang and Hai-Lung Tsai
The Vibrational Contribution to the Thermal Conductivity of a Polyatomic Fluid, Zhi Liang and Hai-Lung Tsai
Calculation of Thermophysical Properties for CO₂ Gas Using an Ab Initio Potential Model, Z. Liang and Hai-Lung Tsai
The Vibrational Contribution to the Thermal Conductivity of a Polyatomic Fluid, Z. Liang and Hai-Lung Tsai
A Method to Fabricate 2D Nanoparticle Arrays, Cheng-Hsiang Lin, Lan Jiang, Yen-Hsin Chai, Hai Xiao, Shean-Jen Chen, and Hai-Lung Tsai
Surface-Enhanced Raman Scattering Microchip Fabricated by Femtosecond Laser, Cheng-Hsiang Lin, Lan Jiang, Hai Xiao, Shean-Jen Chen, and Hai-Lung Tsai
Laser-Treated Substrate with Nanoparticles for Surface-Enhanced Raman Scattering, Cheng-Hsiang Lin, Lan Jiang, Jinping Zhou, Hai Xiao, Shean-Jen Chen, and Hai-Lung Tsai
Real-Time Depth Measurement for Micro-Holes Drilled by Lasers, Cheng-Hsiang Lin, Rock A. Powell, Lan Jiang, Hai Xiao, Shean-Jen Chen, and Hai-Lung Tsai
Enhancement of Ablation Efficiency by a Femto/Nano-Second Dual-Beam Micromachining System, Cheng-Hsiang Lin, Zheng-Hua Rao, Hai-Lung Tsai, Lan Jiang, Wu-Jung Tsai, Ping-Han Wu, and Chih-Wei Chien
Ultrasensitive Chemical Sensors Based on Whispering Gallery Modes in a Microsphere Coated with Zeolite, N. Lin, Lan Jiang, S. Wang, L. Yuan, Hai Xiao, Y. Lu, and Hai-Lung Tsai
Multi-Axis Planning System (MAPS) for Hybrid Laser Metal Deposition Processes, Frank W. Liou, Jianzhong Ruan, and Todd E. Sparks
Research on Extrusion Velocity in Freeform Extrusion Fabrication of Aqueous Alumina Paste, Hong Jun Liu and Ming-Chuan Leu
