Submissions from 2021
Thermo-Cycling Fatigue of SiMo Ductile Iron using a Modified Thermo-Mechanical Test, Semen Naumovich Lekakh, Mario F. Buchely, Ronald J. O'Malley, Larry Godlewski, and Mei Li
Reply to the Discussion on “Prevention of High-Temperature Surface Degradation in SiMo Cast Irons by Cr and Al Alloying”, Semen Naumovich Lekakh and L. Godlewski
Extrusion-Based Additive Manufacturing of Functionally Graded Ceramics, Wenbin Li, Amir Armani, Austin Martin, Benjamin Kroehler, Alexander Henderson, Tieshu Huang, Jeremy Lee Watts, Greg Hilmas, and Ming-Chuan Leu
Findings Report: Virtual Workshop on ‘Resilient Supply of Critical Minerals’, Marek Locmelis, Angela D. Lueking, Michael S. Moats, Kwame Awuah-Offei, Lana Z. Alagha, Mark W. Fitch, Alanna Krolikowski, and Shelby Clark
A Review on Hot Tearing of Steels, Yanru Lu, Laura Bartlett, and Ronald J. O'Malley
Method to Investigate Mechanical Behavior of Steel Casting Near Solidus Temperature, Yanru Lu, Laura Bartlett, Ronald J. O'Malley, and Semen Naumovich Lekakh
Towards Resilient and Sustainable Supply of Critical Elements from the Copper Supply Chain: A Review, Michael S. Moats, Lana Z. Alagha, and Kwame Awuah-Offei
Investigating the Microstructure of High-Calcium Fly Ash-Based Alkali-Activated Material for Aqueous Zn Sorption, Sukanta K. Mondal, Adam Welz, Ali A. Rownaghi, Bu Wang, Hongyan Ma, Fateme Rezaei, Aditya Kumar, and Monday Uchenna Okoronkwo
Mechanical Properties of Borothermally Synthesized Zirconium Diboride at Elevated Temperatures, Alec C. Murchie, Jeremy Lee Watts, William Fahrenholtz, and Greg Hilmas
Developing Synthetic Libraries Derived From The Optical Constants N(λ), K(λ) For Hyperspectral Imaging, Tanya L. Myers, Timothy J. Johnson, Bruce E. Bernacki, Michael O. Yokosuk, and Charmayne E. Lonergan
Measuring Accurate Optical Constants Of Uranium Minerals For Use In Optical Modeling Of Infrared Spectra, T. L. Myers, B. M. Devetter, D. L. Saunders, C. (Charmayne) E. Lonergan, M. O. Yokosuk, B. E. Bernacki, A. Bautista, and T. J. Johnson
Effect of Moisture on the Oxidation Behavior of ZrB₂, Ravisankar Naraparaju, Keyur Maniya, Alec Murchie, William Fahrenholtz, and Greg Hilmas
Processing, Microstructure, and Mechanical Properties of Hot-Pressed ZrB₂ Ceramics with a Complex Zr/Si/O-Based Additive, Eric W. Neuman, Benjamin J. Lai, Jeremy Lee Watts, Greg Hilmas, William Fahrenholtz, and Laura Silvestroni
Thermal Properties of ZrB₂-TiB₂ Solid Solutions, Eric W. Neuman, Matthew Thompson, William Fahrenholtz, and Greg Hilmas
Zirconium Diboride Laminates for Improved Damage Tolerance at Elevated Temperatures, Eric W. Neuman, Connor C. Wittmaier, William Fahrenholtz, and Greg Hilmas
Microstructural and Optical Properties of Mgal2o4 Spinel: Effects of Mechanical Activation, Y2o3 and Graphene Additions, Nina Obradovic, William Fahrenholtz, Cole Corlett, Suzana Filipovic, Marko Nikolic, Bojan A. Marinkovic, Simone Failla, Diletta Sciti, Daniele Di Rosa, and Elisa Sani
Formation and Stability of Gismondine-Type Zeolite in Cementitious Systems, Monday Uchenna Okoronkwo, Sukanta K. Mondal, Bu Wang, Hongyan Ma, and Aditya Kumar
Effect of Al Additions on Scale Structure and Oxidation Kinetics of 430-Ferritic Stainless Steel Reheated in a Combustion Atmosphere, Richard Osei, Semen Naumovich Lekakh, and Ronald O'Malley
Thermodynamic Prediction and Experimental Verification of Multiphase Composition of Scale Formed on Reheated Alloy Steels, Richard Osei, Semen Naumovich Lekakh, and Ronald O'Malley
Descaling of Medium C and High Si, Mn Steels, Richard Osei, Semen Naumovich Lekakh, Ronald J. O'Malley, Lesli Peterson, and Oldair Sasso
Formation of Complex Nuclei in Graphite Nodules of Cast Iron, Jingjing Qing, Semen Naumovich Lekakh, Mingzhi Xu, and Daniel Field
Materials for Biomedical Engineering: Fundamentals and Applications, M. N. Rahaman and Roger F. Brown
Corrosion Behavior of Tundish Refractories by Molten Steel and Tundish Flux, Tyler M. Richards, Ronald J. O'Malley, Jeffrey D. Smith, and Todd P. Sander
Dechlorination Apparatus For Treating Chloride Salt Wastes: System Evaluation And Scale-Up, Brian J. Riley, Saehwa Chong, and Charmayne E. Lonergan
Thermal Mapping of Metal Casting Mold using High-Resolution Distributed Fiber-Optic Sensors, Muhammad Roman, Damilola Balogun, Chen Zhu, Laura Bartlett, Ronald J. O'Malley, Rex E. Gerald, and Jie Huang
Thermal Mapping of Metal Casting Mold using High Resolution Distributed Fiber-Optic Sensors, Muhammad Roman, Damilola Balogun, Chen Zhu, Laura Bartlett, Ronald J. O'Malley, Rex Gerald, and Jie Huang
Distributed Fiber-Optic Sensing with Low Bending Loss based on Thin-Core Fiber, Muhammad Roman, Chen Zhu, Ronald J. O'Malley, Rex E. Gerald, and Jie Huang
Structure-Property Relations of a Natural Composite: Bamboo Guadua Angustifolia, under Impact and Flexural Loads, José J. Rua, Mario F. Buchely, Sergio Neves Monteiro, and Henry A. Colorado
Impact Behavior of Laminated Composites Built with Fique Fibers and Epoxy Resin: A Mechanical Analysis using Impact and Flexural Behavior, Julian Rua, Mario F. Buchely, Sergio Neves Monteiro, Gloria I. Echeverri, and Henry A. Colorado
Effect of the Melt Pool Boundary Network on the Anisotropic Mechanical Properties of Selective Laser Melted 304L, Myranda Spratt, Joseph William Newkirk, Okanmisope Fashanu, and K. Chandrashekhara
Measurement of the Melting Temperature of ZrB₂ as Determined by Laser Heating and Spectrometric Analysis, Austin D. Stanfield, Dario Manara, Davide Robba, Greg Hilmas, and William Fahrenholtz
Multi-Level Modeling of Thermal Behavior of Phase Change Material Incorporated Lightweight Aggregate and Concrete, Xiao Sun, Wenyu Liao, Aditya Kumar, Kamal Khayat, Zhenghong Tian, and Hongyan Ma
Reversible Phase Transformation in Ti₂AlC Films during He Radiation and Subsequent Annealing, Ranran Su, Hongliang Zhang, Longfei Liu, Liqun Shi, and Haiming Wen
Antioxidant Thioether Core-Crosslinked Nanoparticles Prevent the Bilateral Spread of Secondary Injury to Protect Spatial Learning and Memory in a Controlled Cortical Impact Mouse Model of Traumatic Brain Injury, Aria W. Tarudji, Connor C. Gee, Sarah M. Romereim, Anthony J. Convertine, and Forrest M. Kievit
A Review On Alpha Case Formation And Modeling Of Mass Transfer During Investment Casting Of Titanium Alloys, R. Sharon Uwanyuze, Janos E. Kanyo, Sarah F. Myrick, and Stefan Schafföner
Mechanical Properties, Translucency, And Low Temperature Degradation (LTD) Of Yttria (3–6 Mol%) Stabilized Zirconia, R. Sharon Uwanyuze, Sulekha Ramesh, Mark K. King, Nathaniel Lawson, and Manoj K. Mahapatra
Hot Ductility Behavior of V-N Microalloyed Steels, Madhuri Varadarajan, Laura Bartlett, Ronald J. O'Malley, Semen Naumovich Lekakh, and Mario F. Buchely
Stainless Steel Substrate Pretreatment Effects on Copper Nucleation and Stripping during Copper Electrowinning, Florian Verbruggen, Erika Fiset, Luiza Bonin, Antonin Prévoteau, Michael S. Moats, Tom Hennebel, and Korneel Rabaey
Crystal Plasticity Modeling of Fretting Fatigue Behavior of an Aluminum Alloy, Jian Wang, Tianju Chen, and Caizhi Zhou
Predicting the Energetics and Kinetics of Cr Atoms in Fe-Ni-Cr Alloys Via Physics-Based Machine Learning, Yuchu Wang, Bita Ghaffari, Christopher Taylor, Semen Naumovich Lekakh, Mei Li, and Yue Fan
A Comparison of Adhesive Wear with Three-Body Abrasive Wear Characteristics of Graphitic White Irons Designed for Metal-To-Metal Wear Systems, Jie Wan, David C. Van Aken, Jingjing Qing, and Mingzhi Xu
Machine Learning Enabled Models to Predict Sulfur Solubility in Nuclear Waste Glasses, Xinyi Xu, Taihao Han, Jie Huang, Albert A. Kruger, Aditya Kumar, and Ashutosh Goel
Helium Effects and Bubbles Formation in Irradiated Ti₃SiC₂, Hongliang Zhang, Ranran Su, Izabela Szlufarska, Liqun Shi, and Haiming Wen
Electronic Structure and Thermal Conductivity of Zirconium Carbide with Hafnium Additions, Yue Zhou, William Fahrenholtz, Joseph T. Graham, and Greg Hilmas
From Thermal Conductive to Thermal Insulating: Effect of Carbon Vacancy Content on Lattice Thermal Conductivity of ZrCₓ, Yue Zhou, William Fahrenholtz, Joseph T. Graham, and Greg Hilmas
Fiber Optic Sensor Embedded Smart Helmet for Real-Time Impact Sensing and Analysis through Machine Learning, Yiyang Zhuang, Qingbo Yang, Taihao Han, Ryan O'Malley, Aditya Kumar, Rex E. Gerald II, and Jie Huang
A Review: Material and Structural Properties of UHPC at Elevated Temperatures or Fire Conditions, Yanping Zhu, Husam Hussein, Aditya Kumar, and Genda Chen
Submissions from 2020
Effect of Preexisting Inclusions on the Size and Morphology of Al₂O₃: Results from Two-Stage and Fixed Supersaturation Deoxidation, Obinna Adaba, Ronald J. O'Malley, and Laura Bartlett
Effect of Pre-existing Inclusions on the Size and Morphology of Al₂O₃: Single Stage Deoxidation with Varying Levels of Supersaturation, Obinna Adaba, Ronald J. O'Malley, and Laura Bartlett
Filtration Efficiency of Inclusions in Lightweight FeMnAl Steels, Koushik Balasubramanian, Laura Bartlett, Ronald J. O'Malley, Soumava Chakraborty, and Mingzhi Xu
Effective Copper Diffusion Coefficients in CuSO₄—H₂SO₄ Electrowinning Electrolytes, Joseph Bauer and Michael S. Moats
Iron Polyphosphate Glasses for Waste Immobilization, Richard K. Brow, Cheol-Woon Kim, and Signo Tadeu Dos Reis
Experimental Development of Johnson-Cook Strength Model for Different Carbon Steel Grades and Application for Single-Pass Hot Rolling, Mario F. Buchely, Shouviik Ganguly, David C. Van Aken, Ronald J. O'Malley, Simon Naumovich Lekakh, and K. Chandrashekhara
Prediction of Surface Chloride Concentration of Marine Concrete using Ensemble Machine Learning, Rong Cai, Taihao Han, Wenyu Liao, Jie Huang, Dwnag Li, Aditya Kumar, and Hongyan Ma
Skin Effect of Chloride Ingress in Marine Concrete: A Review on the Convection Zone, Rong Cai, Yingshuang Hu, Miao Yu, Wenyu Liao, Lufeng Yang, Aditya Kumar, and Hongyan Ma
Removal of Alumina Inclusions from Molten Steel by Ceramic Foam Filtration, Soumava Chakraborty, Ronald J. O'Malley, Laura Bartlett, and Mingzhi Xu
Predicting the Size Scaling in Strength of Nanolayered Materials by a Discrete Slip Crystal Plasticity Model, Tianju Chen, Rui Yuan, Irene J. Beyerlein, and Caizhi Zhou
Characterization of the Conversion of Bone Cement and Borate Bioactive Glass Composites, Kimberly A. Cole, Grahmm A. Funk, M. N. Rahaman, and Terence E. McIff
Influence of Size-Classified and Slightly Soluble Mineral Additives on Hydration of Tricalcium Silicate, Rachel Cook, Hongyan Ma, and Aditya Kumar
Effect of Zinc Ions on Copper Electrodeposition in the Context of Metal Recovery from Waste Printed Circuit Boards, T. R. Da Silva, D. Majuste, J. Bauer, and Michael S. Moats
Gas-Solid Displacement Reactions in the Ti-W-C System, Ryan D. Dempsey and David W. Lipke
Cyclic Regeneration of Nanostructured Composites for Catalytic Applications, Fatih Dogan
Thickness-Dependent Shear Localization in Cu/Nb Metallic Nanolayered Composites, Shujing Dong, Tianju Chen, Sixie Huang, Nan Li, and Caizhi Zhou
Solute Distributions in Tantalum-Containing Zirconium Diboride Ceramics, Anna N. Dorner, Dallin J. Barton, Yue Zhou, Gregory B. Thompson, Greg Hilmas, and William Fahrenholtz
Annealing Behavior in a High-Pressure Torsion-Processed Fe—9Cr Steel, Jiaqi Duan, Haiming Wen, Caizhi Zhou, Xiaoqing He, Rinat Islamgaliev, and Ruslan Valiev
Discontinuous Grain Growth in an Equal-Channel Angular Pressing Processed Fe-9Cr Steel with a Heterogeneous Microstructure, Jiaqi Duan, Haiming Wen, Caizhi Zhou, Xiaoqing He, Rinat Islamgaliev, and Ruslan Valiev
Predicting Effective Fracture Toughness of ZrB₂-Based Ultra-High Temperature Ceramics by Phase-Field Modeling, Arezoo Emdadi, Jeremy Lee Watts, William Fahrenholtz, Greg Hilmas, and Mohsen Asle Zaeem
Thank You Lisa Klein, William Fahrenholtz
Densification of Ultra-Refractory Transition Metal Diboride Ceramics, William Fahrenholtz, Greg Hilmas, and Ruixing Li
Corrosion Behavior of 304L Stainless Steel Produced by Laser Powder Bed Fusion, Christopher Faraj, Ho Lun Chan, Jacob Benoun, Shahan Kasnakjian, Zachary Hilton, Joseph William Newkirk, and Vilupanur Ravi
Effective Elastic Properties of Additively Manufactured Metallic Cellular Structures using Numerical Unit-Cell Homogenization, Okanmisope Fashanu, David Murphy, Myranda Spratt, Joseph William Newkirk, K. Chandrashekhara, Ben Brown, and John Porter
Effect of ZrB₂ Content on the Densification, Microstructure, and Mechanical Properties of ZrC-SiC Ceramics, Lun Feng, William Fahrenholtz, and Greg Hilmas
Processing of Dense High-Entropy Boride Ceramics, Lun Feng, William Fahrenholtz, and Greg Hilmas
Two-Step Synthesis Process for High-Entropy Diboride Powders, Lun Feng, William Fahrenholtz, and Greg Hilmas
Early Stage Oxidation of ZrC under 10 MeV Au³⁺ Ion-Irradiation at 800 °C, Raul Florez, Miguel L. Crespillo, Xiaoqing He, Tommi A. White, Greg Hilmas, William Fahrenholtz, and Joseph T. Graham
The Irradiation Response of ZrC Ceramics under 10 MeV Au³⁺ Ion Irradiation at 800 ºC, Raul Florez, Miguel L. Crespillo, Xiaoqing He, Tommi A. White, Greg Hilmas, William Fahrenholtz, and Joseph T. Graham
A Modified Johnson-Cook Model Incorporating the Effect of Grain Size on Flow Stress, S. Ganguly, Mario F. Buchely, K. Chandrashekhara, Semen Naumovich Lekakh, and Ronald J. O'Malley
Arsenic and Antimony Speciation Analysis in Copper Electrolyte by Liquid Chromatography Coupled to Hydride Generation Atomic Fluorescence Spectrometry (HPLC-HG-AFS), Ana Isabel Gonzalez De Las Torres, Michael S. Moats, Guillermo Rios, Ana Rodriguez Almansa, and Daniel Sanchez-Rodas
An Ensemble Machine Learning Approach for Prediction and Optimization of Modulus of Elasticity of Recycled Aggregate Concrete, Taihao Han, Ashfia Siddique, Kamal Khayat, Jie Huang, and Aditya Kumar
Machine Learning as a Tool to Design Glasses with Controlled Dissolution for Healthcare Applications, Taihao Han, Nicholas Stone-Weiss, Jie Huang, Ashutosh Goel, and Aditya Kumar
Effect of Pouring Temperature during a Novel Solid-Liquid Compound Casting Process on Microstructure and Mechanical Properties of AZ91D Magnesium Alloy Parts with Arc-Sprayed Aluminum Coatings, Ke He, Jianhua Zhao, Jun Cheng, JingJing Shangguan, Fulin Wen, Jiaqi Duan, Ranran Su, Biao Yuan, and Haiming Wen
Enhanced Resistance to Irradiation Induced Ferritic Transformation in Nanostructured Austenitic Steels, Andrew Hoffman, Maalavan Arivu, Haiming Wen, Li He, Kumar Sridharan, Xin Wang, Wei Xiong, Xiang Liu, Lingfeng He, and Yaqiao Wu
Effects of Al and Ti Additions on Irradiation Behavior of FeMnNiCr Multi-Principal-Element Alloy, Andrew Hoffman, Li He, Matthew Luebbe, Hans Pommerenke, Jiaqi Duan, Peipei Cao, Kumar Sridharan, Zhaoping Lu, and Haiming Wen
Effect of Cyclic Intercritical Tempering on the Microstructure and Mechanical Properties of a Low-Carbon Cu-Bearing 7Ni Steel, Wei Hou, Qingdong Liu, Haiming Wen, and Jianfeng Gu
Mineral Dissolution under Electric Stimulation, Yi Hsuan Hsiao, Xin Chen, Erika Callagon La Plante, Aditya Kumar, Mathieu Bauchy, Dante Simonetti, David Jassby, Jacob Israelachvili, and Gaurav Sant
Effective Elastic Moduli of Metal Honeycombs Manufactured using Selective Laser Melting, Rafid Hussein, Sudharshan Anandan, Myranda Spratt, Joseph William Newkirk, K. Chandrashekhara, Misak Heath, and Michael Walker
Relaxin Enhances Bone Regeneration with BMP-2-Loaded Hydroxyapatite Microspheres, Sahitya Injamuri, M. N. Rahaman, Youqu Shen, and Yue-Wern Huang
Monolithic Chalcogenide Optical Nanocomposites Enable Infrared System Innovation: Gradient Refractive Index Optics, Myungkoo Kang, Laura Sisken, Charmayne Lonergan, Andrew Buff, Anupama Yadav, Claudia Goncalves, Cesar Blanco, Peter Wachtel, J. David Musgraves, Alexej V. Pogrebnyakov, Erwan Baleine, Clara Rivero-Baleine, Theresa S. Mayer, Carlo G. Pantano, and Kathleen A. Richardson
An overview of ceramic molds for investment casting of nickel superalloys, Janos E. Kanyo, Stefan Schafföner, R. Sharon Uwanyuze, and Kaitlynn S. Leary
Bioprinting with Bioactive Glass Loaded Polylactic Acid Composite and Human Adipose Stem Cells, Krishna C. R. Kolan, Julie A. Semon, August T. Bindbeutel, D. E. Day, and Ming-Chuan Leu
Voltammetric Characteristics of Smooth Lead Electrodes in Sulfuric Acid and Tydrolyte™ Solutions Part 1. The PbSO₄/PbO₂potential Region, Julian Kosacki and Fatih Dogan
Response of Isotopically Tailored Titanium Diboride to Neutron Irradiation, Takaaki Koyanagi, Yutai Katoh, Caen Ang, Derek King, Greg Hilmas, and William Fahrenholtz
Sonication-Assisted Hydrolysis of Ozone Oxidized Detonation Nanodiamond, Atsushi Kume and Vadym Mochalin
Effects of Inert Additives on Cyclotrimethylene-Trinitramine (RDX)/Trinitrotoluene (TNT) Detonation Parameters to Predict Detonation Synthesis Phase Production, Martin Langenderfer, William Fahrenholtz, and Catherine E. Johnson
Detonation Synthesis of Silicon Carbide Nanoparticles, Martin J. Langenderfer, William Fahrenholtz, Sergii Chertopalov, Yue Zhou, Vadym Mochalin, and Catherine E. Johnson
Influence of Water Activity on Hydration of Tricalcium Aluminate-Calcium Sulfate Systems, Jonathan Lapeyre, Hongyan Ma, Monday Uchenna Okoronkwo, Gaurav Sant, and Aditya Kumar
Reviewing the Material and Metal Security of Low-Carbon Energy Transitions, J. Lee; Kwame Awuah-Offei; Michael S. Moats; and For full list of authors, see publisher's website.
Searching for Graphite Nodule Nuclei using Automated SEM/EDX Analysis, Semen Naumovich Lekakh
Prevention of High-Temperature Surface Degradation in SiMo Cast Irons by Cr and Al Alloying, Semen Naumovich Lekakh, Asebi Bofah, Wei Ting Chen, Larry Godlewski, and Mei Li
Correction To: Improving High-Temperature Performance of High Si-Alloyed Ductile Iron by Altering Additions (International Journal of Metalcasting, (2020), 10.1007/S40962-020-00524-0), Semen Naumovich Lekakh, Caelen Johnson, Asebi Bofah, Larry Godlewski, and Mei Li
