Submissions from 2019
Densification Behavior of ZrB₂-MoSi₂ Ceramics: The Formation and Evolution of Core-Shell Solid Solution Structures, Frederic Monteverde, Ryan J. Grohsmeyer, Austin D. Stanfield, Greg Hilmas, and William Fahrenholtz
Compressive and Bending Performance of Selectively Laser Melted AlSi10Mg Structures, D. Murphy, O. Fashanu, Myranda Spratt, Joseph William Newkirk, K. Chandrashekhara, H. Misak, and D. Klenosky
Facile Approach to Develop Durable and Reusable Superhydrophobic/superoleophilic Coatings for Steel Mesh Surfaces, Debasis Nanda, Abanti Sahoo, Aditya Kumar, and Bharat Bhushan
Microstructure and Mechanical Properties of Reaction-Hot-Pressed Zirconium Diboride based Ceramics, Eric W. Neuman, William Fahrenholtz, and Greg Hilmas
Elevated Temperature Electrical Resistivity Measurements of Zirconium Diboride using the Van Der Pauw Method, Eric W. Neuman, Gregory J. K. Harrington, Greg Hilmas, and William Fahrenholtz
The Effect of Mechanical Activation on Synthesis and Properties of MgAl₂O₄ Ceramics, N. Obradovic, William Fahrenholtz, S. Filipovic, D. Kosanovic, A. Dapcevic, A. Dordevic, I. Balac, and V. B. Pavlovic
Characterization of MgAl₂O₄ Sintered Ceramics, Nina Obradovic, William Fahrenholtz, Suzana Filipovic, Cole Corlett, Pavle Dordevic, Jelena Rogan, Predrag J. Vulic, Vladimir Buljak, and Vladimir Pavlovic
The Structure and Properties of XZnO-(67-x)SnO-33P₂O₅ Glasses: (IV) Mechanical Properties, Takaya Okamoto, Akira Saitoh, Parker T. Freudenberger, Hiromichi Takebe, and Richard K. Brow
Back in Session: Kicking Off a Season of Learning with AIST, Ronald J. O'Malley
Inclusion Evolution and Removal in Ladle Refining, Ronald J. O'Malley
Dropwise Evaporation of Hydrophilic Coolant Droplets: A Methodology for the Development of Hydrophilic Coating and Attainment of Enhanced Heat Transfer, Anita Panda, A. R. Pati, Aditya Kumar, and Soumya S. Mohapatra
The Role of Viscous and Capillary Forces in the Prediction of Critical Conditions Defining Super-Hydrophobic and Hydrophilic Characteristics, Anita Panda, A. R. Pati, B. Saha, Aditya Kumar, and Soumya S. Mohapatra
Investigation of Dynamic Fracture Behavior of Additively Manufactured Al-10Si-Mg using High-Speed Synchrotron X-Ray Imaging, Niranjan D. Parab, Lianghua Xiong, Qilin Guo, Zherui Guo, Cody Kirk, Yizhou Nie, Xianghui Xiao, Kamel Fezzaa, Wesley Everheart, Weinong Chen, Lianyi Chen, and Tao Sun
Comparison of Fatigue Performance between Additively Manufactured and Wrought 304L Stainless Steel using a Novel Fatigue Test Setup, M. M. Parvez, Y. Chen, Joseph William Newkirk, and Frank W. Liou
A Displacement Controlled Fatigue Test Method for Additively Manufactured Materials, Mohammad Masud Parvez, Yitao Chen, Sreekar Karnati, Connor Coward, Joseph William Newkirk, and Frank W. Liou
The Discrepancy in the Prediction of Surface Temperatures by Inverse Heat Conduction Models for Different Quenching Processes from Very High Initial Surface Temperature, A. R. Pati; N. H. Bhatt; L. Das; S. Teja; S. Nayak; Aditya Kumar; and For full list of authors, see publisher's website.
Evidence of the Coexistence of Multivalence Cerium Oxide Nano-Particles in a Sodium Borate Glass, Kisa S. Ranasinghe, Rajnish Singh, D. E. Day, Klaus Attenkofer, Eli Stavitski, Lon A. Quinn, Diane Patterson, and Andrew Duenas
Impact Response of Bamboo Guadua Angustifolia Kunth, Julian Rua, Mario F. Buchely, and Henry A. Colorado
Structure -- Property Relation of Epoxy Resin with Fique Fibers: Dynamic Behavior using Split-Hopkinson Pressure Bar and Charpy Tests, Julian Rua, Mario F. Buchely, Sergio Neves Monteiro, and Henry A. Colorado
Geometric Effects of Open Hollow Hydroxyapatite Microspheres Influence Bone Repair and Regeneration in Sprague Dawley Rats, Youqu Shen, M. N. Rahaman, Yongxian Liu, and Yue-Wern Huang
Infrared Glass–Ceramics With Multidispersion And Gradient Refractive Index Attributes, Laura Sisken, Myungkoo Kang, Johann M. Veras, Charmayne Lonergan, Andrew Buff, Anupama Yadav, Devon McClane, Cesar Blanco, Clara Rivero-Baleine, Theresa S. Mayer, and Kathleen A. Richardson
Liver Targeted Primaquine Drugamers for the Treatment of Malaria in High Risk Settings, S. Srinivasan; K. S. Montgomery; C.L.M. LeGuyader; F. Y. Su; Anthony J. Convertine; and For full list of authors, see publisher's website.
Separation of Oil-Water Via Porous PMMA/SiO₂ Nanoparticles Superhydrophobic Surface, Sangeetha Sriram and Aditya Kumar
Formation of Nanostructures in Ti₂AlC Induced by High-Temperature Helium Irradiation, Ranran Su, Hongliang Zhang, Liqun Shi, and Haiming Wen
Monitoring Passive Film Growth on Steel using Fe-C Coated Long Period Grating Fiber Sensor, Fujian Tang, Zhaochao Li, Yizheng Chen, Hong-Nan Li, Jie Huang, and Matthew O'Keefe
Robust and Durable Superhydrophobic Steel and Copper Meshes for Separation of Oil-Water Emulsions, Balraj K. Tudu and Aditya Kumar
Fabrication of Superoleophobic Cotton Fabric for Multi-Purpose Applications, Balraj K. Tudu, Aditya Kumar, and Bharat Bhushan
Understanding the Role of Inclusions on the Dynamic Fracture Toughness of High Strength Lightweight FeMnAl Steels, Rairu Vaz Penna, Laura Bartlett, and T. Constance
Influence of TiN Additions on the Microstructure of a Lightweight Fe-Mn-Al Steel, Rairu Vaz Penna, Laura Bartlett, and Ronald J. O'Malley
Recycling of Industrial Metals and Materials: Trends in Recent Research -- Part I, Dirk E. Verhulst, Fiseha Tesfaye, and Mark E. Schlesinger
Influence of Fibre Content on the Strength of Carbon Fibre Reinforced HfC/SiC Composites Up to 2100 °C, Antonio Vinci, Luca Zoli, Diletta Sciti, Jeremy Lee Watts, Greg Hilmas, and William Fahrenholtz
Mechanical Behaviour of Carbon Fibre Reinforced TaC/SiC and ZrC/SiC Composites Up to 2100°C, A. Vinci, L. Zoli, D. Sciti, Jeremy Lee Watts, Greg Hilmas, and William Fahrenholtz
Flexoelectricity in Solids: Progress, Challenges, and Perspectives, Bo Wang, Yijia Gu, Shujun Zhang, and Long-Qing Chen
Modeling and Simulation of Dynamic Recrystallization Behavior in Alloyed Steel 15V38 during Hot Rolling, Xin Wang, K. Chandrashekhara, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Developing a Graphitic White Iron for Abrasive Wear Application: Thermal and Wear Properties, Jie Wan, David C. Van Aken, Jingjing Qing, Thomas J. Yaniak, Thomas E. Clements, and Mingzhi Xu
Age Hardening Studies of a Cu-4Ti-Cr-Fe Alloy, Huan Wei, Xinyu Dai, Pengju Han, Caizhi Zhou, Yinghui Wei, and Lifeng Hou
Microstructure Evolution in Irradiation-Tolerant Ultrafinegrained Steels, Haiming Wen, A. K. Hoffman, and J. Q. Duan
High-Temperature Damage-Tolerance of Coextruded, Bioinspired ("Nacre-Like"), Alumina/Nickel Compliant-Phase Ceramics, Ryan P. Wilkerson, Bernd Gludovatz, Jon Ell, Jeremy Lee Watts, Greg Hilmas, and Robert O. Ritchie
Melt Property Variation In GeSe2-As2Se3-PbSe Glass Ceramics For Infrared Gradient Refractive Index (GRIN) Applications, Anupama Yadav, Andrew Buff, Myungkoo Kang, Laura Sisken, Charmayne Smith (Lonergan), Jason Lonergan, Cesar Blanco, Michael Antia, Megan Driggers, Andrew Kirk, Clara Rivero-Baleine, Theresa Mayer, Andrew Swisher, Alexej Pogrebnyakov, A. R. Hilton, and Greg Whaley
Effect of Vanadium and Aluminum Grain Refining Treatment on Steel Machinability, Xueliang Zhang, Semen Naumovich Lekakh, Ronald J. O'Malley, Eduardo Scheid, Mark C. Emmendorfer, and Michael Fox
Thermal Decomposition Studies of EPS Foam, Polyurethane Foam, and Epoxy Resin (SLA) as Patterns for Investment Casting; Analysis of Hydrogen Cyanide (HCN) from Thermal Degradation of Polyurethane Foam, Hongfang Zhao, Paul Ki-souk Nam, Von Richards, and Semen Naumovich Lekakh
Control Upstream Austenite Grain Coarsening during Thin Slab Casting Direct Rolling (TSCDR) Process, Tihe Zhou, Ronald J. O'Malley, Hatem S. Zurob, Mani Subramanian, San-Hyun Cho, and Peng Zhang
A New Alloy System Having Autogenous Grain Pinning at High Temperature, Tihe Zhou, Hatem S. Zurob, and Ronald J. O'Malley
Synthesis of ZrCₓ with Controlled Carbon Stoichiometry by Low Temperature Solid State Reaction, Yue Zhou, Thomas W. Heitmann, William Fahrenholtz, and Greg Hilmas
Submissions from 2018
Size Distribution Evolution of Inclusions in Aluminum Killed-Calcium Treated Steel during Steelmaking, Casting and Hot Rolling, Obinna M. Adaba, Ronald J. O'Malley, Mingzhi Xu, and Laura Bartlett
Three-Dimensional Study of Inclusion Morphology and Size Distribution in Mn-Si Killed Steel, Obinna M. Adaba, Ronald J. O'Malley, Mingzhi Xu, Laura Bartlett, and Simon N. Lekakh
Selective Depression of Silicates in Phosphate Flotation using Polyacrylamide-Grafted Nanoparticles, Ashraf Alsafasfeh, Mostafa Khodakarami, Lana Z. Alagha, Michael S. Moats, and Ontlametse Molatlhegi
Failure in Metal Honeycombs Manufactured by Selective Laser Melting of 304L Stainless Steel under Compression, Sudharshan Anandan, Rafid M. Hussein, Myranda Spratt, Joseph William Newkirk, K. Chandrashekhara, Heath Misak, and Michael Walker
Aging Response on the Stress Corrosion Cracking Behavior of Wrought Precipitation Hardened Magnesium Alloy, Gaurav R. Argade, Sushanta K. Panigrahi, and Rajiv S. Mishra
Removal of Antimony and Bismuth from Copper Electrorefining Electrolyte: Part I -- A Review, Andrew Artzer, Michael S. Moats, and Jack Bender
Removal of Antimony and Bismuth from Copper Electrorefining Electrolyte: Part II -- An Investigation of Two Proprietary Solvent Extraction Extractants, Andrew Artzer, Michael S. Moats, and Jack Bender
Two Inoculation Methods for Refining As-Cast Grain Structure in Austenitic 316L Steel, Dusint A. Arvola, Semen Naumovich Lekakh, Ronald J. O'Malley, and Laura Bartlett
Effect of Phase Solidification Sequence in Stainless Steel on Grain Refining Efficiency, Dustin Arvola, Semen Naumovich Lekakh, Ronald J. O'Malley, and Laura Bartlett
Recent advances in study of solid-liquid interfaces and solidification of metals, Mohsen Asle Zaeem
Minimizing Phosphorus Pickup During Melting and Casting of Lightweight Fe-Mn-Al-C Steels, Laura Bartlett, R. Rahman, and A. Torres
Formation of chromium-iron carbide by carbon diffusion in AlₓCoCrFeNiCu high-entropy alloys, Mohsen Beyramali Kivy, Caitlin S. Kriewall, and Mohsen Asle Zaeem
The Diminishment of Specific Heat and Surface Tension of Coolant Droplet in a Dropwise Evaporation Process: A Novel Methodology to Enhance the Heat Transfer Rate, N. H. Bhatt, A. R. Pati, L. Das, Anita Panda, Priya Varshney, Aditya Kumar, and B. Munshi
Rolling Pressures during the Hot-Roll of Three Different Steel Plates: Experimental, Analytical and FEA, Mario F. Buchely, David C. Van Aken, Ronald J. O'Malley, Xin Wang, K. Chandrashekhara, and Semen Naumovich Lekakh
Micro-Slotting Technique for Reliable Measurement of Sub-Surface Residual Stress in Ti-6Al-4V, Elizabeth Burns, Joseph William Newkirk, and James Castle
Phase Exploration and Identification of Multinary Transition-Metal Selenides as High-Efficiency Oxygen Evolution Electrocatalysts through Combinatorial Electrodeposition, Xi Cao, Yu Hong, Ning Zhang, Qingzhi Chen, Jahangir Masud, Mohsen Asle Zaeem, and Manashi Nath
Efficiency of Solid Inclusion Removal from the Steel Melt by Ceramic Foam Filter: Design and Experimental Validation, Soumava Chakraborty, Ronald J. O'Malley, Laura Bartlett, and Mingzhi Xu
Photoelectrochemistry of Ultrathin, Semitransparent, and Catalytic Gold Films Electrodeposited Epitaxially onto N-Silicon (111), Qingzhi Chen and Jay A. Switzer
Environment-Sensitive Photoresponse of Spontaneously Partially Oxidized Ti₃C₂ MXene Thin Films, Sergii Chertopalov and Vadym Mochalin
Micellization of a Di-Block Copolymer in Ethylene Glycol and Its Utilization for Suspension of Carbonaceous Nanostructures, Neta Cohen, Efrat Ziv, Gleb Vasilyev, Anthony J. Convertine, Yael Levi-Kalisman, and Rachel Yerushalmi-Rozen
Mechanical Properties and Grain Orientation Evolution of Zirconium Diboride-Zirconium Carbide Ceramics, A. D'Angio, J. Zou, J. Binner, H.-B. Ma, Greg Hilmas, and William Fahrenholtz
Radiant Star Nanoparticle Prodrugs for the Treatment of Intracellular Alveolar Infections, Debobrato Das, Selvi Srinivasan, F. D. Brown, F. Y. Su, A. L. Burrell, J. M. Kollman, A. Postma, Daniel M. Ratner, Patrick S. Stayton, and Anthony J. Convertine
Nickel telluride as a bifunctional electrocatalyst for efficient water splitting in alkaline medium, Umanga De Silva, Jahangir Masud, Ning Zhang, Yu Hong, Wipula P. R. Liyanage, Mohsen Asle Zaeem, and Manashi Nath
Saturable Absorption in 2D Ti₃C₂ MXene Thin Films for Passive Photonic Diodes, Yongchang Dong, Sergii Chertopalov, Kathleen Maleski, Babak Anasori, Longyu Hu, Sriparna Bhattacharya, Apparao M. Rao, Yury Gogotsi, Vadym Mochalin, and Ramakrishna Podila
A Modified Phase-Field Model for Quantitative Simulation of Crack Propagation in Single-Phase and Multi-Phase Materials, Arezoo Emdadi, William Fahrenholtz, Greg Hilmas, and Mohsen Asle Zaeem
An Investigation of the Machinability of Abrasion Resistant AR450 Steel, Mark C. Emmendorfer; Semen Naumovich Lekakh; Laura Bartlett; Ronald J. O'Malley; and For full list of authors, see publisher's website.
Effect of Aluminum and Vanadium Fine Grain Practice on the Machinability of 4140 Steel, Mark C. Emmendorfer; Semen Naumovich Lekakh; Laura Bartlett; Ronald J. O'Malley; and For full list of authors, see publisher's website.
Selective Laser Melting of Fe-Co Intermetallics and Resulting Grain Boundary Performance, Wesley A. Everhart, Benjamin J. Sikora, Ann Choi, Rachel Cramm-Horn, Ida Sanchez, and Joseph William Newkirk
A Note of Thanks to John Halloran, William Fahrenholtz
Corrosion Resistance of Pipeline Steel with Damaged Enamel Coating and Cathodic Protection, Liang Fan, Signo Tadeu Dos Reis, Genda Chen, and Michael L. Koenigstein
Impedance Models and Water Transport Behavior of Steel Pipe Coated with Cathodically Polarized Enamel, Liang Fan, Signo Tadeu Dos Reis, Genda Chen, and Michael L. Koenigstein
Corrosion Resistances of Steel Pipe Coated with Two Types of Enamel by Two Coating Processes, Liang Fan, Fujian Tang, Genda Chen, Signo Tadeu Dos Reis, and Mike L. Koenigstein
The Influence of Build Parameters on the Compressive Properties of Selective Laser Melted 304L Stainless Steel, Okanmisope Fashanu, Mario F. Buchely, R. Hussein, S. Anandan, Myranda Spratt, Joseph William Newkirk, K. Chandrashekhara, H. Misak, and M. A. Walker
Chemistry and Properties of Medium-Mn Two-Stage TRIP Steels, Daniel M. Field, Jingjing Qing, and David C. Van Aken
Dynamic Strain Aging Phenomena and Tensile Response of Medium-Mn TRIP Steel, Daniel M. Field and David C. Van Aken
Fully Synthetic Macromolecular Prodrug Chemotherapeutics with EGFR Targeting and Controlled Camptothecin Release Kinetics, Hanna Freeman, Selvi Srinivasan, Debobrato Das, Patrick S. Stayton, and Anthony J. Convertine
A High-Entropy Alloy with Hierarchical Nanoprecipitates and Ultrahigh Strength, Zhiqiang Fu; Lin Jiang; Haiming Wen; and For full list of authors, see publisher's website.
Effects of the Tempering and High-Pressure Torsion Temperatures Onmicrostructure of Ferritic/Martensitic Steel Grade 91, Artur Ganeev, Marina Nikitina, Vil Sitdikov, Rinat Islamgaliev, Andrew Hoffman, and Haiming Wen
The Response of ZrB₂ to Simulated Plasma-Facing Material Conditions of He Irradiation at High Temperature, Lauren M. Garrison, Gerald L. Kulcinski, Greg Hilmas, William Fahrenholtz, and Harry M. Meyer III
Dissolution Behavior of Ternary Alkali-Alkaline Earth-Borate Glasses in Water, Kathryn Goetschius, M. A. Beuerlein, C. M. Bischoff, and Richard K. Brow
Femtosecond Laser-Matter Interactions in Ternary Zinc Phosphate Glasses, J. Hernandez-Rueda, N. W. Troy, P. Freudenberger, Richard K. Brow, and D. M. Krol
Development of an Engineering Diagram for Additively Manufactured Austenitic Stainless Steel Alloys, Zachary T. Hilton, Joseph William Newkirk, and Ronald J. O'Malley
Metastable phase transformation and deformation twinning induced hardening-stiffening mechanism in compression of silicon nanoparticles, Yu Hong, Ning Zhang, and Mohsen Asle Zaeem
The Structure and Properties of XZnO-(67-X)SnO-33P₂O₅ Glasses: (II) Diffraction, NMR, and Chromatographic Studies, Uwe Hoppe, Akira Saitoh, Gregory Tricot, Parker Freudenberger, Alex C. Hannon, Hiromichi Takebe, and Richard K. Brow
Fiber-Fed Printing of Free-Form Free-Standing Glass Structures, John M. Hostetler, Jason E. Johnson, Jonathan T. Goldstein, Douglas A. Bristow, Robert G. Landers, and Edward C. Kinzel
Study of Reversible Motion of {101̅2} Tensile Twin Boundaries in a Magnesium Alloy during Strain Path Changes, Dewen Hou, Qizhen Li, and Haiming Wen
Deformation Mechanisms in a Rolled Magnesium Alloy under Tension along the Rolling Direction, Dewen Hou, Tianmo Liu, Meng Shi, Haiming Wen, and Haiyan Zhao
The Effects of Crystallization and Residual Glass on the Chemical Durability of Iron Phosphate Waste Forms Containing 40 wt% of a High MoO3 Collins-CLT Waste, Jen-Hsien Hsu, Jincheng Bai, Cheol-Woon Kim, Richard K. Brow, Joe Szabo, and Adam Zervos
Atomistic Simulations of Plasticity in Heterogeneous Nanocrystalline Ni Lamella, Sixie Huang, Jian Wang, Nan Li, Jizhi Zhang, and Caizhi Zhou
Deformation of Heterogeneous Nanocrystalline Lamella with a Preexisting Crack, Sixie Huang, Jian Wang, and Caizhi Zhou
Efficient Electrochemical Recovery of Fine Tellurium Powder from Hydrochloric Acid Media Via Mass Transfer Enhancement, Wei Jin, Junling Su, Shifu Chen, Ping Li, Michael S. Moats, Govindhan Maduraiveeran, and Hong Lei
Ultralow Dispersion Multicomponent Thin-Film Chalcogenide Glass For Broadband Gradient-Index Optics, Myungkoo Kang, Andrew M. Swisher, Alexej V. Pogrebnyakov, Liu Liu, Andrew Kirk, Stephen Aiken, Laura Sisken, Charmayne Lonergan, Justin Cook, Teodor Malendevych, Fedor Kompan, Ivan Divliansky, Leonid B. Glebov, Martin C. Richardson, Clara Rivero-Baleine, and Carlo G. Pantano
Characterization of Impact Toughness of 304L Stainless Steel Fabricated through Laser Powder Bed Fusion Process, Sreekar Karnati, Atoosa Khiabhani, Aaron Flood, Frank W. Liou, and Joseph William Newkirk
Solidification of Welded SiC-ZrB₂-ZrC Ceramics, Derek King, Jeremy Lee Watts, Kathleen S. Cissel, Ali H. Kadhim, Greg Hilmas, and William Fahrenholtz
Solvent and Melt based Extrusion 3D Printing of Polycaprolactone Bioactive Glass Composite for Tissue Engineering, Krishna C. R. Kolan, Wenbin Li, Rachel Althage, Julie A. Semon, D. E. Day, and Ming-Chuan Leu
Development of Durable Self-Cleaning Superhydrophobic Coatings for Aluminium Surfaces Via Chemical Etching Method, Aditya Kumar and Bidisha Gogoi
