Submissions from 2023
Microstructure, Mechanical Properties and Oxidation Behavior of Refractory Multi-Principal Element Alloys by Laser Remelting and Conventional Manufacturing, Visharad Jalan, Seth Crawford, Sung Heng Wu, Frank Liou, and Haiming Wen
Microstructure, Mechanical Properties and Oxidation Behavior of Refractory Multi-Principal Element Alloys by Laser Remelting and Conventional Manufacturing, Visharad Jalan, Seth Crawford, Sung Heng Wu, Frank W. Liou, and Haiming Wen
Impact Of Alumina-based Binder On Formation Of Dense Strontium Zirconate Ceramics, Janos E. Kanyo, R. Sharon Uwanyuze, Jiyao Zhang, Rainer Hebert, Stefan Schafföner, and Lesley Frame
Solid-state Calcination And Synthesis Of Homogeneous Strontium Zirconate By Slip Casting, Janos E. Kanyo, R. Sharon Uwanyuze, Jiyao Zhang, Rainer Hebert, Stefan Schafföner, and Lesley Frame
Microstructure Evolution And Austenitic Grain Refinement Of Ti-Modified High Mn Steels During Solution Annealing Heat Treatment, Abhinav Karanam, Arnab Sarkar, Erik Nenzen, Viraj Ashok Athavale, Mark Watson, Laura Nicole Bartlett, and Lukas Bichler
In-Situ Observation Of The Solidification Of X70 Steel Using High-Temperature Confocal Scanning Laser Microscope, Katelyn Kiser, Viraj A. Athavale, Laura Bartlett, Ronald J. O'Malley, and Mario F. Buchely
A Study of the Solidification of Fe-Mn-Al Steels Using the High-Temperature Laser Scanning Confocal Microscope, Katelyn Kiser, Viraj A. Athavale, Mario F. Buchely, Laura Bartlett, and Ronald J. O'Malley
In-Situ Observation of the Solidification of X70 Steel Using High-Temperature Laser-Scanning Confocal Microscope, Katelyn Kiser, Viraj A. Athavale, Mario F. Buchely, Laura Bartlett, and Ronald J. O'Malley
Reduction Of Iron-Ore Pellets Using Different Gas Mixtures And Temperatures, Yuri Korobeinikov, Amogh Meshram, Christopher Harris, Olexandr Kovtun, Joe Govro, Ronald J. O'Malley, Olena Volkova, and Seetharaman Sridhar
Effect Of As-cast Surface On Oxidation Behavior Of High-Si Ductile Irons, Simon N. Lekakh, Asebi Bofah, Ron (Ronald) J. O'Malley, Laura Bartlett, Larry Godlewski, and Mei Li
Effect of Cr and Ni Concentrations on Resilience of Cast Nb-Alloyed Heat Resistant Austenitic Steels at Extreme High Temperatures, Simon N. Lekakh, Mario F. Buchely, Mei Li, and Larry Godlewski
Phenomenological Analysis Of Surface Degradation Of Metallic Materials In Extreme Environment, Simon N. Lekakh and Oleg Neroslavsky
Engineering Heterogeneous Nucleation During Solidification Of Multiphase Cast Alloys: An Overview, Simon (Semen) N. Lekakh and Jingjing Qing
Influence Of Novel Carbon Sources On Microstructure And Properties Of (Ti0.2Zr0.2Hf0.2Ta0.2Nb0.2)C High-entropy Carbide Ceramic, Saisai Li, Qianfang Wu, Jie Zhan, Ruoyu Chen, Aiqin Mao, Cuihong Zheng, and Haiming Wen
Using Synthetic Infrared Spectra Derived from N/k Optical Constants for Standoff Detection of Chemical Deposits, Charmayne E. Lonergan, Jeremy D. Erickson, Molly Rose K. Kelly-Gorham, Oliva M. Primera-Pedrozo, Michael J. Wilhelm, Brenda M. Forland, Kendall D. Hughey, Bruce E. Bernacki, Timothy J. Johnson, and Tanya L. Myers
A High-Strength Precipitation Hardened Cobalt-Free High-Entropy Alloy, Matthew Luebbe, Jiaqi Duan, Fan Zhang, Jonathan Poplawsky, Hans Pommeranke, Maalavan Arivu, Andrew Hoffman, Mario F. Buchely, and Haiming Wen
A High-Strength Precipitation Hardened Cobalt-Free High-Entropy Alloy, Matthew Luebbe, Jiaqi Duan, Fan Zhang, Jonathan Poplawsky, Hans Pommeranke, Maalavan Arivu, Andrew Hoffman, Mario Buchely, and Haiming Wen
Compositional Modifications to Alter and Suppress Laves Phases in AlxCrMoTayTi Alloys, Austin E. Mann and Joseph William Newkirk
Particle Migration in Large Cross-Section Ceramic On-Demand Extrusion Components, Austin J. Martin, Wenbin Li, Jeremy Lee Watts, Gregory E. Hilmas, Ming-Chuan Leu, and Tieshu Huang
Particle Migration in Large Cross-Section Ceramic On-Demand Extrusion Components, Austin J. Martin, Wenbin Li, Jeremy Lee Watts, Gregory E. Hilmas, Ming-Chuan Leu, and Tieshu Huang
Particle Migration in Large Cross-Section Ceramic On-Demand Extrusion Components, Austin J. Martin, Wenbin Li, Jeremy Lee Watts, Gregory E. Hilmas, Ming-Chuan Leu, and Tieshu Huang
Modelling the first Hydrogen Direct Reduction Pilot Reactor for Ironmaking in the USA using Finite Element Analysis and its Validation using Pilot Plant Trial Data, Amogh Meshram, Yuri Korobeinkov, Daniela Dalle Nogare, Alberto Zugliano, Joe Govro, Ronald J. O'Malley, and Sridhar Seerharaman
Effect of Class C and Class F Fly Ash on Early-Age and Mature-Age Properties of Calcium Sulfoaluminate Cement Paste, Sukanta K. Mondal, Carrie Clinton, Hongyan Ma, Aditya Kumar, and Monday Uchenna Okoronkwo
Anisotropic Thermal Expansion in High-Entropy Multicomponent Alb2-Type Diboride Solid Solutions, Frédéric Monteverde, Mattia Gaboardi, Federico Saraga, Lun Feng, William Fahrenholtz, and Gregory Hilmas
Anisotropic Thermal Expansion in High-Entropy Multicomponent Alb2-Type Diboride Solid Solutions, Frédéric Monteverde, Mattia Gaboardi, Federico Saraga, Lun Feng, William Fahrenholtz, and Gregory Hilmas
Anisotropic Thermal Expansion in High-Entropy Multicomponent Alb2-Type Diboride Solid Solutions, Frédéric Monteverde, Mattia Gaboardi, Federico Saraga, Lun Feng, William Fahrenholtz, and Gregory Hilmas
Experimental And Machine Learning Studies On Chitosan-Polyacrylamide Copolymers For Selective Separation Of Metal Sulfides In The Froth Flotation Process, Keitumetse Monyake, Taihao Han, Danish Ali, Lana Z. Alagha, and Aditya Kumar
Thermal Properties of Hfn-Mow Surrogate Cermet Fuel for Nuclear Thermal Propulsion, James F. Mudd, Jeremy Lee Watts, Jhonathan Rosales, Ryan P. Wilkerson, Brian Taylor, William Fahrenholtz, Gregory Hilmas, and Joseph T. Graham
Thermal Properties of Hfn-Mow Surrogate Cermet Fuel for Nuclear Thermal Propulsion, James F. Mudd, Jeremy Lee Watts, Jhonathan Rosales, Ryan P. Wilkerson, Brian Taylor, William Fahrenholtz, Gregory Hilmas, and Joseph T. Graham
Thermal Properties of Hfn-Mow Surrogate Cermet Fuel for Nuclear Thermal Propulsion, James F. Mudd, Jeremy Lee Watts, Jhonathan Rosales, Ryan P. Wilkerson, Brian Taylor, William Fahrenholtz, Gregory Hilmas, and Joseph T. Graham
Thermally Robust and Highly Stable Method for Splicing Silica Glass Fiber to Crystalline Sapphire Fiber, Farhan Mumtaz, Dinesh Reddy Alla, Muhammad Roman, Bohong Zhang, Jeffrey D. Smith, Rex E. Gerald, Ronald J. O'Malley, and Jie Huang
Boosting SNR Of Cascaded FBGs In A Sapphire Fiber Through A Rapid Heat Treatment, Farhan Mumtaz, Hanok Tekle, Bohong Zhang, Jeffrey D. Smith, Ronald J. O'Malley, Rex E. Gerald, and Jie Huang
Boosting SNR of cascaded FBGs in a sapphire fiber through a rapid heat treatment, Farhan Mumtaz, Hanok Tekle, Bohong Zhang, Jeffrey D. Smith, Ronald J. O'Malley, Rex Gerald, and Jie Huang
Highly Cascaded First-Order Sapphire Optical Fiber Bragg Gratings Fabricated by a Femtosecond Laser, Farhan Mumtaz, Hanok Tekle, Bohong Zhang, Jeffrey D. Smith, Ronald J. O'Malley, and Jie Huang
Large-scale Cascading Of First-order FBG Array In A Highly Multimode Coreless Fiber Using Femtosecond Laser For Distributed Thermal Sensing, Farhan Mumtaz, Bohong Zhang, Ronald J. O'Malley, and Jie Huang
Influence Of Partial Substitution Of Cr By Al On Microstructure And Mechanical Behavior Of Fe30Ni35Cr35 Multi-principal Element Alloy, Jiacheng Niu, Zhiqiang Fu, Weiping Chen, Chenliang Chu, Dezhi Zhu, and Haiming Wen
Tailoring Microstructure And Tensile Properties Of Low-cost AlCrFeNi-based High-entropy Alloys Via Co And/or Ti Addition, Jiacheng Niu, Zhiqiang Fu, Weiping Chen, Liangyan Hao, Wei Xiong, Tiwen Lu, and Haiming Wen
Effect Of Mechanical Activation On Carbothermal Synthesis And Densification Of ZrC, Nina Obradović, Lun Feng, Suzana Filipović, Miljana Mirković, Darko Kosanović, Jelena Rogan, and William Fahrenholtz
Morphological And Structural Characterization Of MgAl2O4 Spinel, Nina Obradović, Suzana Filipović, William Fahrenholtz, Bojan A. Marinkovic, Jelena Rogan, Steva Lević, Antonije Đorđević, and Vladimir B. Pavlović
Effect Of Water Jet Nozzle Lead Angle On Descaling Efficiency, T. P. Ojiako, V. A. Athavale, R. Osei, Taha Tayebali, Oldair Sasso, Mario F. Buchely, Laura Bartlett, Semen Naumovich Lekakh, and R. (Ronald) J. O'Malley
Investigating the Effect of Different Descale Nozzle Types and Jet Angles on Scale Removal, T. P. Ojiako, Viraj A. Athavale, R. Osei, Mario F. Buchely, Laura Bartlett, Simon Naumovich Lekakh, and Ronald J. O'Malley
Fiber Optic Sensing Technologies Supporting Advancements In Steel Production And The Shift To Industry 4.0, Ronald J. O'Malley
Fiber Optic Sensing Technologies Supporting Advancements in Steel Production and the Shift to Industry 4.0, Ronald J. O'Malley
Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE), Jacob Ortega, Jeffrey D. Smith, Fateme Rezaei, David Bayless, William P. Schonberg, Daniel S. Stutts, and Daoru Frank Han
Nitrogen Composition And Its Effect On Magnetic Properties Of Simulated Twin-Roll Cast Non-Grain Oriented Si Steel, H. Parrish, Mario F. Buchely, R. (Ronald) J. O'Malley, V. Athavale, and P. Kelly
Effect of Mass and Economic Allocation on Tellurium Life Cycle Impacts, I. E. Paschalidou, Kwame Awuah-Offei, and Michael S. Moats
A Strong and Ductile Cobalt-Free Solid-Solution Fe30Ni30Mn30Cr10 Multi-Principal Element Alloy from Hot Rolling, Hans Pommerenke, Jiaqi Duan, Nathan Curtis, Victor DeLibera, Adam Bratten, Andrew Hoffman, Mario F. Buchely, Ronald J. O'Malley, and Haiming Wen
A Strong and Ductile Cobalt-Free Solid-Solution Fe30Ni30Mn30Cr10 Multi-Principal Element Alloy from Hot Rolling, Hans Pommerenke, Jiaqi Duan, Nathan Curtis, Victor DeLibera, Adam Bratten, Andrew Hoffman, Mario Buchely, Ronald O'Malley, and Haiming Wen
Predicting Compressive Strength and Hydration Products of Calcium Aluminate Cement using Data-Driven Approach, Sai Akshay Ponduru, Taihao Han, Jie Huang, and Aditya Kumar
One Pot Synthesis of Thiol-Functional Nanoparticles, Aaron Priester, Jimmy Yeng, Krista Hilmas, and Anthony J. Convertine
3D Printing Soluble Solids Via PISA, Aaron Priester, Jimmy Yeng, Yuwei Zhang, Risheng Wang, and Anthony J. Convertine
Preparation and Characterization Methods of Thin-Layer Samples for Standoff Detection, Oliva M. Primera-Pedrozo, Jeremy D. Erickson, Charmayne E. Lonergan, Sarah D. Burton, Bruce E. Bernacki, Tanya L. Myers, and Timothy J. Johnson
Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres with Re-Crosslinking Ability for Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, and Thomas Schuman
Multiphysics Modeling And Experimental Validation Of High-strength Steel In Laser Powder Bed Fusion Process, M. Rangapuram, S. Babalola, Joseph William Newkirk, Laura Bartlett, Frank W. Liou, K. Chandrashekhara, and Stephen R. Cluff
Performance Evaluation Of Composite Sandwich Structures With Additively Manufactured Aluminum Honeycomb Cores With Increased Bonding Surface Area, M. Rangapuram, S. K. Dasari, Joseph William Newkirk, K. Chandrashekhara, H. Misak, P. R. Toivonen, D. Klenosky, T. Unruh, and J. Sam
High Temperature Confocal Scanning Laser Microscopy Analysis of Dead-Burned Magnesia Aggregates, Tyler Richards, Viraj Athavale, Jeffrey D. Smith, and Ronald J. O'Malley
Temperature Monitoring in the Refractory Lining of a Continuous Casting Tundish using Distributed Optical Fiber Sensors, Muhammad Roman, Hanok Tekle, Dinesh Reddy Alla, Farhan Mumtaz, Jeffrey D. Smith, Laura Bartlett, Ronald J. O'Malley, Rex E. Gerald, and Jie Huang
Calculations of Adsorption-Dependent Refractive Indices of Metal-Organic Frameworks for Gas Sensing Applications, Nahideh Salehifar, Peter Holtmann, Abhishek Prakash Hungund, Homayoon Soleimani Dinani, Rex E. Gerald, and Jie Huang
Corona Discharge Treatment for Surface Modification and Adhesion Improvement, Thomas Schuman
A Prediction of Young's Modulus for Tin Containing Phosphate Glasses using Quantitative Structural Information, Tatsuki Shimizu, Akira Saitoh, Uwe Hoppe, Grégory Tricot, and Richard K. Brow
Multi-Phase (Zr,Ti,Cr)B2 Solid Solutions: Preparation, Multi-Scale Microstructure, and Local Properties, Laura Silvestroni, Nicola Gilli, Alex Sangiorgi, Alessandro Corozzi, Suzana Filipović, Nina Obradović, Laia Ortiz-Membrado, Emilio Jiménez-Piqué, and William Fahrenholtz
The Effects Of Phosphorus Pentoxide Additions On The Thermal, Rheological, And Structural Properties Of Sodium Borosilicate Glass, K. L. Skerratt-Love, J. L. George, A. M.T. Bell, F. Sweeney, D. Cutforth, C. (Charmayne) E. Lonergan, D. R. Dixon, A. A. Kruger, and P. A. Bingham
Pressureless Sintering of Dual-Phase, High-Entropy Boride–carbide Ceramics, Steven M. Smith, William Fahrenholtz, Greg Hilmas, and Tieshu Huang
Thermal and Electrical Properties of Spark Plasma Sintered (Ti,cr)b2 Ceramics, Steven M. Smith, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, and Laura Silvestroni
Thermal and Electrical Properties of Spark Plasma Sintered (Ti,cr)b2 Ceramics, Steven M. Smith, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, and Laura Silvestroni
Thermal and Electrical Properties of Spark Plasma Sintered (Ti,cr)b2 Ceramics, Steven M. Smith, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, and Laura Silvestroni
An Adaptive Physics-based Feature Engineering Approach For Machine Learning-assisted Alloy Discovery, Yasaman J. Soofi, Yijia Gu, and Jinling Liu
Final-stage Densification Kinetics Of Direct Current–sintered ZrB2, Austin D. Stanfield, Steven M. Smith, Suzana Filipović, Nina Obradović, Vladimir Buljak, Gregory E. Hilmas, and William Fahrenholtz
Mechanical Properties Of ZrB2 Ceramics Determined By Two Laboratories, Jeffrey J. Swab, Jecee Jarman, William Fahrenholtz, and Jeremy Lee Watts
Antioxidant Theranostic Copolymer-Mediated Reduction In Oxidative Stress Following Traumatic Brain Injury Improves Outcome In A Mouse Model, Aria W. Tarudji, Connor C. Gee, Hunter A. Miller, Rylie Steffen, Evan T. Curtis, Aaron M. Priester, Anthony J. Convertine, and Forrest M. Kievit
Distributed Temperature Monitoring Of Tundish Refractory Lining Using Optical Fiber Sensors, Hanok Tekle, Muhammad Roman, Rex E. Gerald, Ronald J. O'Malley, Jie Huang, Todd Sander, and Jeffrey D. Smith
High-Temperature Interactions Between Titanium Alloys And Strontium Zirconate Refractories, R. Sharon Uwanyuze, Baris Yavas, Jiyao Zhang, Janos E. Kanyo, Lesley D. Frame, Rainer J. Hebert, Stefan Schafföner, and S. Pamir Alpay
Metal Cations as Inorganic Structure-Directing Agents during the Synthesis of Phillipsite and Tobermorite, Juan Carlos Vega-Vila, Advait Holkar, Ross A. Arnold, Dale P. Prentice, Shiqi Dong, Longwen Tang, Erika Callagon La Plante, Kirk Ellison, Aditya Kumar, Mathieu Bauchy, Samanvaya Srivastava, Gaurav Sant, and Dante Simonetti
Lightweight Ti-Zr-Nb-Al-V Refractory High-entropy Alloys With Superior Strength-ductility Synergy And Corrosion Resistance, Hao Wang, Weiping Chen, Zhiqiang Fu, Chenliang Chu, Zhao Tian, Zhenfei Jiang, and Haiming Wen
Methods for Determining the Infrared Complex Refractive Indices N(Λ) and K(Λ) from Organic Solid Powders: Comparison of a Sucrose Single Crystal and a Pressed Pellet, Michael O. Yokosuk, Danielle L. Saunders, Charles Tom Resch, Jeremy D. Erickson, Charmayne E. Lonergan, Sarah D. Burton, Mark E. Bowden, Kelly A. Peterson, Timothy J. Johnson, and Tanya L. Myers
Advancing Aluminum Casting Optimization With Real-Time Temperature And Gap Measurements Using Optical Fiber Sensors At The Metal-Mold Interface, Bohong Zhang, Abhishek Prakash Hungund, Dinesh Reddy Alla, Deva Prasaad Neelakandan, Muhammad Roman, Ronald J. O'Malley, Laura Bartlett, Rex E. Gerald, and Jie Huang
Fiber-Optic Raman Probe For On-line EAF Slag Analysis, Bohong Zhang, Hanok Tekle, Ronald J. O'Malley, Todd Sander, Jeffrey D. Smith, Laura Bartlett, Farhan Mumtaz, Rex E. Gerald, and Jie Huang
The Study Of The Behavior Of CaO-SiO2-Al2O3-Na2O-Based Mold Flux At 1,400 ºC By A Fiber -Optic Raman Sensor, Bohong Zhang, Hanok Tekle, Ronald J. O'Malley, Todd Sander, Jeffrey D. Smith, Laura Bartlett, Farhan Mumtaz, Rex E. Gerald, and Jie Huang
In Situ and Real-Time Mold Flux Analysis using a High-Temperature Fiber-Optic Raman Sensor for Steel Manufacturing Applications, Bohong Zhang, Hanok Tekle, Ronald J. O'Malley, Todd Sander, Jeffrey D. Smith, Rex E. Gerald, and Jie Huang
Structural Analysis Of Molten Materials By A Remote Fiber Optic Raman Sensor, Bohong Zhang, Hanok Tekle, Ronald J. O'Malley, Todd Sander, Jeffrey D. Smith, Rex E. Gerald, and Jie Huang
In Situ High-Temperature Raman Spectroscopy Via a Remote Fiber-Optic Raman Probe, Bohong Zhang, Hanok Tekle, Ronald J. O'Malley, Jeffrey D. Smith, Rex E. Gerald, and Jie Huang
The Study of the Behavior of CaO-SiO2-Al2O3-Na2O-Based Mold Flux in 1400C by a Fiber-Optic Raman Sensor, Bohong Zhang, Hanok Tekle, Jeffrey D. Smith, Todd Sander, Ronald J. O'Malley, and Jie Huang
Vacancy Ordering In Zirconium Carbide With Different Carbon Contents, Yue Zhou, Jeremy Lee Watts, Cheng Li, William Fahrenholtz, and Gregory E. Hilmas
Submissions from 2022
High Temperature Fiber Optic Sensors for Steel Industry Applications, Dinesh Reddy Alla, Deva Prasaad Neelakandan, Laura Bartlett, Ronald J. O'Malley, and Jie Huang
Calibration Of Low-Cost Particulate Matter Sensors for Coal Dust Monitoring, N. A. Amoah, Aditya Kumar, Yang Wang, and Gu Xu
Improved Canopy Air Curtain Dust Protection Using a Novel Design Combining the Impinging Jet and a Two-Level Manifold, N. A. Amoah, Aditya Kumar, and Gu Xu
Dissolution Amplification by Resonance and Cavitational Stimulation at Ultrasonic and Megasonic Frequencies, Ross A. Arnold; Shiqi Dong; Longwen Tang; Dale Prentice; Marie Collin; Juan Carlos Vega-Vila; Amaya Hernandez; Erika Callagon La Plante; Kirk Ellison; Aditya Kumar; and For full list of authors, see publisher's website.
Dissolution Amplification by Resonance and Cavitational Stimulation at Ultrasonic and Megasonic Frequencies, Ross A. Arnold, Shiqi Dong, Longwen Tang, Dale Prentice, Marie Collin, Juan Carlos Vega-Vila, Amaya Hernandez, Erika Callagon La Plante, Kirk Ellison, Aditya Kumar, Samanvaya Srivastava, Mathieu Bauchy, Dante Simonetti, and Gaurav N. Sant
Shell Measurements and Mold Thermal Mapping Approach to Characterize Steel Shell Formation in Peritectic Grade Steels, Damilola Balogun, Muhammad Roman, Rex E. Gerald, Jie Huang, Laura Bartlett, and Ronald J. O'Malley
Nodule Formation on Copper Electrodeposits in the Rotating Cylinder Hull Cell, Joseph Bauer and Michael S. Moats
Nodule Formation on Copper Electrodeposits in the Rotating Cylinder Hull Cell, Joseph Bauer and Michael S. Moats
Ultrafast Stiffening of Concentrated Thermoresponsive Mineral Suspensions, Sharu Bhagavathi Kandy, Iman Mehdipour, Narayanan Neithalath, Aditya Kumar, Mathieu Bauchy, Edward Garboczi, Samanvaya Srivastava, Torben Gaedt, and Gaurav Sant
Ultrafast Stiffening of Concentrated Thermoresponsive Mineral Suspensions, Sharu Bhagavathi Kandy, Iman Mehdipour, Narayanan Neithalath, Aditya Kumar, Mathieu Bauchy, Edward Garboczi, Samanvaya Srivastava, Torben Gaedt, and Gaurav Sant
Predicting Compressive Strength of Alkali-Activated Systems based on the Network Topology and Phase Assemblages using Tree-Structure Computing Algorithms, Rohan Bhat, Taihao Han, Sai Akshay Ponduru, Arianit Reka, Jie Huang, Gaurav Sant, and Aditya Kumar
Predicting Compressive Strength of Alkali-Activated Systems based on the Network Topology and Phase Assemblages using Tree-Structure Computing Algorithms, Rohan Bhat, Taihao Han, Sai Akshay Ponduru, Arianit Reka, Jie Huang, Gaurav Sant, and Aditya Kumar
Improved Additive Manufacturing of Silicon Carbide Parts Via Pressureless Electric Field-Assisted Sintering, Adam Bratten, Ruoyu Chen, Joshua Rittenhouse, Ming-Chuan Leu, and Haiming Wen
Improved Additive Manufacturing of Silicon Carbide Parts Via Pressureless Electric Field-Assisted Sintering, Adam Bratten, Ruoyu Chen, Joshua Rittenhouse, Ming-Chuan Leu, and Haiming Wen
Oxide Evolution on the SiC Layer of TRISO Particles during Extended Air Oxidation, Adam Bratten, Visharad Jalan, Tyler Gerczak, and Haiming Wen
High-Temperature Compression Behavior and Phase Transformations during Continuous Cooling of a Low-Alloy Cr-Ni-Mo Ultrahigh-Strength Steel, R. Cardoso, Mario F. Buchely, V. A. Athavale, S. Chakraborty, Ronald J. O'Malley, Laura Bartlett, Krista Limmer, Katherine Sebeck, and Daniel Field
High-Temperature Compression Behavior and Phase Transformations during Continuous Cooling of a Low-Alloy Cr-Ni-Mo Ultrahigh-Strength Steel, R. Cardoso, Mario F. Buchely, V. A. Athavale, S. Chakraborty, Ronald J. O'Malley, Laura Bartlett, Krista Limmer, Katherine Sebeck, and Daniel Field