Solubility of Bismuth, Antimony and Arsenic in Synthetic and Industrial Copper Electrorefining Electrolyte

Abstract

The precipitation of problematic Group 15 elements (As, Sb and Bi) in synthetic and industrial copper electrorefining electrolyte was examined. Using published thermodynamic values, the solubility products of BiAsO4 and SbAsO4 at 65 °C were calculated as 0.69 and 1.50 g2 L−2, respectively. Experiments were performed where solutions were spiked with arsenic, bismuth and/or antimony, and the start of precipitation was determined based on changes in solution turbidity. For arsenic concentrations of 9–13 g L−1, the concentrations of Bi necessary for the beginning of BiAsO4 precipitation were higher for the industrial electrolyte (0.25–0.50 g L−1) than the synthetic electrolyte (0.05–0.10 g L−1) at each arsenic concentration examined. The results indicate that industrial electrolyte has a greater capacity than the synthetic electrolyte with respect to the precipitation of BiAsO4. In the synthetic electrolyte, precipitation occurs at 0.30 g L−1 of Sb(III) in the presence of 9 g L−1 of As(V) without the addition of Bi, and 0.20 g L−1 with the addition 0.15 g L−1 Bi. At 10–12 g L−1 of As(V), a concentration of 0.10 g L−1 of Sb(III) produced precipitation. In industrial electrolyte, the increase in Sb(V) from 0.10 g L−1 to 0.16 g L−1, significantly increased precipitation. The presence of As and Sb in the +3 and + 5 appears to influence the solubility of antimony. Furthermore, the industrial electrolyte has enhanced solubility of Sb(III) up to 0.40 g L−1 before precipitation was detected.

Department(s)

Materials Science and Engineering

Keywords and Phrases

BiAsO 4; Copper electrolyte; Equilibrium; Precipitation; SbAsO 4; Turbidity

International Standard Serial Number (ISSN)

0304-386X

Document Type

Article - Journal

Document Version

Citation

File Type

text

Language(s)

English

Rights

© 2023 Elsevier, All rights reserved.

Publication Date

01 Feb 2022

Link to Full Text

Share

 
COinS