Submissions from 2004
Self-Drilling Screw Joints for Cold-Formed Channel Portal Frames, Julie Mills and Roger A. LaBoube
Geometric Design of a Mass Transfer Sensor for Measuring Pollutant Transport in Indoor Air, Glenn Morrison and A. B. Srirama
The Influence of Temperature, Humidity and Changing Conditions on the Measurement of Mass Transfer Coefficients in Indoor Air, Glenn Morrison, Deborah J. Wiseman, and P. Zhao
A Study of Design Procedures for Augered Cast-In-Place-Piles in Clay, Jess Moss and Richard Wesley Stephenson
Using Dynamic Segmentation to Create Home Ranges for Aquatic Species, Eylem Mutlu and Ronaldo Luna
Blast Resistance of Fiber Reinforced Polymer (FRP) Retrofitted Un-Reinforced Masonry (URM) Walls with and Without Arching Action, John J. Myers, Abdeldjelil Belarbi, and Khaled A. El-Domiaty
Blast Resistance of Un-Reinforced Masonry Walls Retrofitted with Fiber Reinforced Polymers, John J. Myers, Abdeldjelil Belarbi, and Khaled A. El-Domiaty
Empirical Modeling of Surface Crack Detection in Concrete using an Open-Ended Rectangular Waveguide, Jagadish Nadakuduti, R. Zoughi, and Genda Chen
Shear Strengthening of a PC Bridge with NSM CFRP Rectangular Bars, Antonio Nanni, Marco Di Ludovico, and Renato Parretti
Blown-Sand Transport Rate, Jinren R. Ni, Zinshen S. Li, and Cesar Mendoza
Strengthening of RC Members Using Near-Surface Mounted FRP Composites: Design Overview, Renato Parretti and Antonio Nanni
Comprehensive Evaluation of Animated Instructional Software for Mechanics of Materials, Timothy A. Philpot and Richard H. Hall
Teaching the Superposition Method with Internet-Based Instructional Software, Timothy A. Philpot, Richard H. Hall, Ralph E. Flori, Nancy E. Hubing, and Vikas Yellamraju
Disclaimer, Shamsher Prakash
Preface, Shamsher Prakash
Selective Upgrade of Underdesigned Reinforced Concrete Beam-Column Joints Using Carbon Fiber-Reinforced Polymers, Andrea Prota, Antonio Nanni, Gaetano Manfredi, and Edoardo Cosenza
Determination of Monochloramine Formation Rate Constants with Stopped-Flow Spectrophotometry, Zhimin Qiang and Craig D. Adams
Potentiometric Determination of Acid Dissociation Constants (PKa) for Human and Veterinary Antibiotics, Zhimin Qiang and Craig D. Adams
Determination of Ozonation Rate Constants for Lincomycin and Spectinomycin, Zhimin Qiang, Rao Y. Surampalli, and Craig D. Adams
An Assessment of In-Situ FRP Shear and Flexural Strengthening of Reinforced Concrete Joists, Annaiah Raghu, John J. Myers, and Antonio Nanni
Deformation Analysis of Missouri Bridge Approach Embankments, Jonathan L. Robison and Ronaldo Luna
Impact of Geographical Information Systems on Geotechnical Engineering, J. David Rogers and Ronaldo Luna
Elastomer Reclaiming Composition and Method, Michael W. Rouse, Victor M. Deeb, Morgan L. White, and Magdy Abdelrahman
Bacterial Competition in Activated Sludge: Theoretical Analysis of Varying Solids Retention Times on Diversity, Pascal E. Saikaly and Daniel B. Oerther
Preliminary Observations of Geotechnical Failures During the 21 May 2003 M 6.8 Boumerdes, Earthquake, Algeria, Said Salah-Mars, Clark Fenton, Fouad Bendimerad, Abdeldjelil Belarbi, and Yumei Wang
Assessment of Subsurface Chlorinated Solvent Contamination Using Tree Cores At the Front Street Site and a Former Dry Cleaning Facility At the Riverfront Superfund Site, New Haven, Missouri, 1999-2003., John G. Schumacher, Garrett C. Struckhoff, and Joel Gerard Burken
Seismic Evaluation of an FRP Retrofit Scheme for Bridge Joints in the New Madrid Seismic Zone, Pedro Franco Silva and Genda Chen
Geometric Design of a Mass Transfer Sensor for Measuring Pollutant Transport in Indoor Air, Anjana B. Srirama and Glenn C. Morrison
Comparison of Cross-Hole, Seismic Cone, Spectral Analysis of Surface Wave (SASW) to Characterize Bridge Sites in the New Madrid Seismic Zone, Richard Wesley Stephenson, Ronaldo Luna, Wanxing Liu, and Neil Lennart Anderson
Fate of Volatile Compounds in Phytoremediation Applications, Garrett C. Struckhoff, Xingmao Ma, Joel Gerard Burken, and Amanda W. Gilbertson
Signal Loss, Spatial Resolution, and Sensitivity of Long Coaxial Crack Sensors, Shishuang Sun, David Pommerenke, James L. Drewniak, and Genda Chen
Renovation of Concrete Water Tank in Chiba Prefecture, Japan, Hikaru Takeuchi, Sachiro Taketomi, Shinya Samukawa, and Antonio Nanni
Overview of the Japanese Guidelines for Seismic Retrofitting of RC Columns using FRP Materials, Gustavo Tumialan, Hiroshi Fukuyama, and Antonio Nanni
Field Evaluation of Unreinforced Masonry Walls Strengthened with FRP Composites Subjected to Out-Of-Plane Loading, Gustavo Tumialan, Davide Tinazzi, John J. Myers, and Antonio Nanni
Strengthening of Masonry Structures with FRP Composites, J. Gustavo Tumialan, Francesco Micelli, and Antonio Nanni
Flexural Capacity of RC Beams Externally Bonded with SRP and SRG, Erin N. Wobbe, Pedro Franco Silva, Antonio Nanni, Jeffery S. Thomas, G. Tunis, Victor Birman, Tarek Alkhrdaji, Bryce L. Barton, and Lokeswarappa R. Dharani
Hydraulic Lifting of Manganese Nodules Through a Riser, J. X. Xia, Jinren R. Ni, and Cesar Mendoza
Upward Flow of Large Size Particles-Water Mixtures Through Swaying Pipes, J. X. Xia, Jinren R. Ni, and Cesar Mendoza
Study on Structural Control of Hybrid Energy Dissipation, Yuxiang Xin, Menglin Lou, and Genda Chen
A Novel Neuro-Computing Strategy for Damage Evaluation using Forced Vibration Time Series, Bin Xu, Genda Chen, Zhishen Wu, and Koichi Yokoyama
Direct Identification of Structural Parameters from Dynamic Responses with Neural Networks, Bin Xu, Zhi Shen Wu, Genda Chen, and Koichi Yokoyama
Shape Effect on the Performance of Carbon FRP Wraps, Xinbao Yang, Jun Wei, Antonio Nanni, and Lokeswarappa R. Dharani
Flexural Performance of RC Beams Strengthened with Prestressed CFRP Sheets, Piyong Yu, Pedro Franco Silva, and Antonio Nanni
Innovative Mechanical Device for the Post-Tensioning of Glass Fiber Reinforced Polymer Bars for Masonry Type Retrofit Applications, Piyong Yu, Pedro Franco Silva, and Antonio Nanni
Isocyanate-Crosslinked Silica Aerogel Monoliths: Preparation and Characterization, Guo-Hui Zhang, Amala Dass, Abdel-Monem M. Rawashdeh, Jeffery S. Thomas, Joseph A. Counsil, Chariklia Sotiriou-Leventis, Eve F. Fabrizio, Faysal Ilhan, Plousia Vassilaras, Daniel A. Scheiman, Linda McCorkle, Anna Palczer, James Chris Johnston, Mary Ann B. Meador, and Nicholas Leventis
Intelligent Hybrid Controlled Structures with Soil-Structure Interaction, X. Z. Zhang, Franklin Y. Cheng, and Meng-Lin Lou
Nonlinear Site Response Analysis in the New Madrid Seismic Zone, Wei Zheng and Ronaldo Luna
Use of Cemented Rock Fill for Enhanced Pillar Recovery in Area 1 of the Doe Run Company, Kenneth J. Zur and Derek Apel
Submissions from 2003
Remediation of a Sinkhole Induced by Quarrying, Thomas J. Abkemeier and Richard Wesley Stephenson
Vertical Shear Wave Velocity Profiles Generated from Spectral Analysis of Surface Waves: Field Examples, Neil Lennart Anderson, Genda Chen, Siasi Kociu, Ronaldo Luna, Thanop Thitimakorn, Alexi A. Malovichko, D. Malovichko, and D. Shylakov
Crosshole Seismic Tomography and Borehole Logging for Engineering Site Characterization in Sikeston, MO, USA, Tiziana Angioni, Richard D. Rechtien, Steven J. Cardimona, and Ronaldo Luna
Evaluation of Tensile and Bearing Capacities of Cold-Formed Steel Connections Attached with Pneumatically Driven Pins, Stuart Werner Baur and Wimal Suaris
Modeling and Control of Vinyl Chloride in Drinking Water Distribution Systems, Michael Beardsley and Craig D. Adams
Post 9-11 Effect on Engineering Education At UMR, Gene C. Beyer, John J. Myers, Jeanie Hofer, and Paul Nicholas Worsey
How to Establish Successful Cooperative Student Learning Centers for STEM Courses, Ronald James Bieniek, Douglas R. Carroll, Cesar Mendoza, Oran Allan Pringle, Ekkehard Sinn, Kai-Tak Wan, and Donald C. Wunsch
Shear and Flexural Strengthening of Masonry Infill Walls with FRP for Extreme Out-Of-Plane Loading, Preston Carney and John J. Myers
Strengthening of a Bridge using Two FRP Technologies, P. Casadei, N. Galati, R. Parretti, and Antonio Nanni
Signal Mast Arm Fatigue Failure Investigation, Genda Chen, Michael G. Barker, Lokeswarappa R. Dharani, and Christopher W. Ramsay
Semi-Active Control of a Steel Frame with Piezoelectric Friction Dampers, Genda Chen and Chaoqiang Chen
Continuous Coaxial Cable Sensors for Monitoring of RC Structures with Electrical Time Domain Reflectometry, Genda Chen, Huimin Mu, James L. Drewniak, and David Pommerenke
Crack Detection of a 15 Meter Long Reinforced Concrete Girder with a Single Distributed Cable Sensor, Genda Chen, Shishuang Sun, X. L. Shen, David Pommerenke, Gary G. Greene, Abdeldjelil Belarbi, and Huimin Mu
Experimental Study on Multiple Tuned Mass Dampers to Reduce Seismic Responses of a Three-Storey Building Structure, Genda Chen and Jingning Wu
Smog and Lemons: Discovering Indoor Air Chemistry, Richard L. Corsi and Glenn Morrison
Characterizing Debris Clouds Created in Oblique Orbital Debris Particle Impact, D. Depczuk and William P. Schonberg
Mass Transfer and Benzene Removal from Air using Latex Rubber Tubing and a Hollow-Fiber Membrane Module, Mark W. Fitch, Jeffrey Neeman, and Ellen England
Three-Dimensional Transient Residual Stress Finite Element Analysis for a Laser Clad Surface, S. Ghosh and Joon-Ho Choi
Fiber-Reinforced Polymer Strengthening of Unreinforced Masonry Walls Subject to Out-Of-Plane Loads, J. Gustavo, Nestore Galati, and Antonio Nanni
Web Crippling of Cold-Formed Steel Beams at End Supports, M. W. Holesapple and Roger A. LaBoube
Ballistic Limit Curves for Non-Spherical Projectiles Impacting Dual-Wall Spacecraft Systems, Kuifeng Hu and William P. Schonberg
Culture-Based Microfluidic Device for Environmental Monitoring, Gaoshan Jing, Amy L. Polaczyk, Daniel B. Oerther, and Ian Papautsky
Deflection Assessment of an FRP-Reinforced Concrete Bridge, D. D. Kleinhans, A. Prota, and Antonio Nanni
Modal Perturbation Method and Its Applications in Structural Systems, Menglin Lou and Genda Chen
Studies on the Use of Carbon Waste Generated from Fertiliser Plant in Waste Water Treatment, Indra Deo Mall, Sanjay Tewari, and Nripendra Singh
Utilisation of Bagasse Fly Ash and Carbon Waste from Fertiliser Plant for Treatment of Pyridine and 3-Picoline Bearing Wastewater, Indra Deo Mall, Sanjay Tewari, Nripendra Singh, and Indra Mani Mishra
TCE Diffusion to the Atmosphere in Phytoremediation Applications, Xingmao Ma and Joel Gerard Burken
Tensile Characterization of FRP Rods for Reinforced Concrete Structures, F. Micelli and Antonio Nanni
Detention Basin Outlet Structure Modifications, Charles Darwin Morris and Gary T. Moore
Smog and Lemons: Discovering Indoor Air Chemistry, Glenn Morrison and Richard L. Corsi
Rapid Measurement of Indoor Mass-Transfer Coefficients, Glenn Morrison, Zhao Ping, Deborah J. Wiseman, Maneerat Ongwandee, Hong Chang, Julie Portman, and Shekhar Regmi
Temperature Effects on Bumper Hole Diameter for Impact Velocities from 2 to 7 Km/s, Brooke A. Myers, William P. Schonberg, and Joel E. Williamsen
Near-Field Microwave Techniques for Detecting Stress-Induced Cracks in Cement-Based Materials, Jagadish Nadakuduti, R. Zoughi, Xiaofei Ying, and Genda Chen
North American Design Guidelines for Concrete Reinforcement and Strengthening using FRP: Principles, Applications and Unresolved Issues, Antonio Nanni
Fiber-Reinforced Composites for the Strengthening of Masonry Structures, Antonio Nanni and J. Gustavo Tumialan
Vertical Profiles of Aeolian Sand Mass Flux, Jinren R. Ni, Zinshen S. Li, and Cesar Mendoza
Integrating Biological Principles in Environmental Engineering Education: Summary Results of a Three-Year Pilot Study, Daniel B. Oerther
NSF CCLI: Developing a Molecular Biology Lab Course in Environmental Engineering and Science, Daniel B. Oerther
The Value of Applying Molecular Biology Tools in Environmental Engineering: Academic and Industry Perspective in the USA, Daniel B. Oerther and Nancy G. Love
Flexural Strengthening of Impacted PC Girder with FRP Composites, R. Parretti, Antonio Nanni, J. Cox, C. Jones, and R. Mayo
Review of Stabilization of Clays and Expansive Soils in Pavements and Lightly Loaded Structures - History, Practice, and Future, Thomas M. Petry and Dallas N. Little
The Amazing Stress Camera: An Interactive Discovery Experience, Timothy A. Philpot and Richard H. Hall
Is There a Better Way to Present an Example Problem?, Timothy A. Philpot, Richard H. Hall, Ralph E. Flori, Nancy E. Hubing, David B. Oglesby, and Vikas Yellamraju
Animated Instructional Media for Stress Transformations in a Mechanics of Materials Course, Timothy A. Philpot, Richard H. Hall, Nancy Hubing, Ralph E. Flori, David B. Oglesby, and Vikas Yellamraju
Computer-Based Instructional Media for Mechanics of Materials, Timothy A. Philpot, Nancy E. Hubing, Ralph E. Flori, Richard H. Hall, David B. Oglesby, and Vikas Yellamraju
Games as Teaching Tools in Engineering Mechanics Courses, Timothy A. Philpot, Nancy Hubing, Richard H. Hall, Ralph E. Flori, David B. Oglesby, and Vikas Yellamraju
Capacity Assessment of RC Subassemblages Upgraded with CFRP, A. Prota, Antonio Nanni, G. Manfredi, and E. Cosenza
Modeling Bacterial Competition in Activated Sludge using Non-linear Dynamics and Monod Kinetics, Pascal E. Saikaly and Daniel B. Oerther
Seismic Performance of Sacrificial Interior Shear Keys, Pedro Franco Silva, Sami Megally, and Frieder Seible
Web Crippling and Combined Bending and Web Crippling of Cold-Formed Steel Beam Headers, Sutton F. Stephens and Roger A. LaBoube
Elevated Precursor 16S rRNA Levels Suggest the Presence of Growth Inhibitors in Wastewater, Peter George Stroot and Daniel B. Oerther
Evaluation of Tensile and Bearing Capacities of Cold-Formed Steel Connections Attached with Pneumatically Driven Pins, Wimal Suaris and Stuart Werner Baur
