Submissions from 1992
Power Flow and Energy in Primary-Secondary Systems, Genda Chen and Tsuteh Soong
Effect Of Strain Rate On Cold-formed Steel Stub Columns, M. Kassar, C. L. Pan, and Wei-Wen Yu
Effect Of Strain Rate On Material Properties Of Sheet Steels, M. Kassar and Wei-Wen Yu
Estimating Uplift Capacity Of Light Steel Roof System, Roger A. LaBoube
Behavior of Arc Spot Weld Connections in Tension, Roger A. LaBoube and Wei-Wen Yu
Shear and combined bending and shear behavior of web elements with openings, Roger A. LaBoube, Wei-Wen Yu, and Ming-Yang Shan
ASCE LRFD Method For Stainless Steel Structures, Shin Hua Lin, Wei-Wen Yu, and Theodore V. Galambos
Design of automotive structural components using high strength sheet steels influence of strain rate on the mechanical properties of sheet steels and structural performance of cold-formed steel members, Chi-Ling Pan and Wei-Wen Yu
Design of automotive structural components using high strength sheet steels mechanical properties of materials, Chi-Ling Pan and Wei-Wen Yu
Post-breakage Behavior Of Architectural Glazing In Windstorms, Chris P. Pantelides, Amy D. Horst, and Joseph E. Minor
Liquefaction Of Low Plasticity Silts, Shamsher Prakash and J. A. Sandoval
Activities of the Center for Cold-formed Steel Structures, Wei-Wen Yu and Roger A. LaBoube
Recent Research and Developments in Cold-formed Steel Design and Construction, Wei-Wen Yu and Roger A. LaBoube
Submissions from 1991
Use of Field Data in Calculating Cost of Earth Road Maintenance, Magdy Abdelrahman and Essam Sharaf
Reliability Analysis Of Window Glass Failure Pressure Data, Richard A. Behr, M. J. Karson, and Joseph E. Minor
Power Flow and Energy Balance Between Nonconservatively Coupled Oscillators, Genda Chen and Tsuteh Soong
Instability And Collapse Behavior Of A Seismic Structure, Franklin Y. Cheng and Jeng Fuh Ger
Cold-formed Steel Z-sections With Sloping Edge Stiffness Under Axial Load, Roger A. LaBoube
Uplift Capacity Of Z-purlins, Roger A. LaBoube
Flexural behavior of web elements with openings, Roger A. LaBoube, Wei-Wen Yu, and K. D. Batson
Effect of flange restraint on web crippling strength, Roger A. LaBoube, Wei-Wen Yu, and Bhavnesh H. Bhakta
Flexural behavior of web elements with openings, Roger A. LaBoube, Wei-Wen Yu, Ming-Yang Shan, and K. D. Batson
Illustrative examples based on the ASCE standard specification for the design of cold-formed stainless steel structural members, Shin-Hua Lin, Wei-Wen Yu, and Theodore V. Galambos
On Predictions and Performance of Machine Foundations, George M. S. Manyando and Shamsher Prakash
Design of automotive structural components using high strength sheet steels structural strength of cold-formed steel beams under dynamic loads, Chi-Ling Pan and Wei-Wen Yu
Dedication to Harry B. Seed, Shamsher Prakash
Disclaimer, Shamsher Prakash
Preface, Shamsher Prakash
Banquet Speeches and Remarks, Shamsher Prakash, Shiming Wu, Kenji Akino, John T. Park, Joseph H. Senne, and Jeanne L. Senne
Stiffness and Damping Parameters for Dynamic Analysis of Retaining Walls, E. Arni Rafnsson and Shamsher Prakash
Review of Variables That Influence Measured Concrete Compressive Strength, David Newton Richardson
Site Stratigraphy and its Effects on Soil Amplification in the Greater Oakland Area During the October 17, 1989 Loma Prieta Earthquake, J. David Rogers
Two Sequences of Fine Grained Soil Liquefaction at Soda Lake, Pajaro River Valley, Santa Cruz County, California, J. David Rogers, C. J. Wills, and M. W. Manson
The Influence of Large Prestrains on Dynamic Properties of Sand, Richard Wesley Stephenson, S. K. Stringer, and K. Sutterer
Analytical And Experimental Investigation On Vibration Control Of Piezoelectric Structures, M. J. Tzeng and W-Z Ben Wu
Tensile strength of welded connections, Wei-Wen Yu and Roger A. LaBoube
Web crippling behavior of sections with web openings, Wei-Wen Yu, James E. Langan, and Roger A. LaBoube
Submissions from 1990
Response Of Structurally Glazed Insulating Glass Units To Wind Pressures, J. R. Bailey, Joseph E. Minor, and R. W. Tock
Shear Band Development In Dynamic Loading Of A Viscoplastic Cylinder Containing Two Voids, R. C. Batra and Xiong Zhang
Cost Comparison Of Timber, Steel, And Prestressed Concrete Bridges, Richard A. Behr, E. J. Cundy, and C. H. Goodspeed
Revised Method Of Approximate Structural Analysis, Richard A. Behr, E. J. Grotton, and C. A. Dwinal
Knowledge-based Prototype For Improving Scheduling Productivity, Colin Othniel Benjamin, Daniel L. Babcock, N. B. Yunus, and John B. Kincaid
Seismic Risk Analysis of LAXIWA Power Station, Genda Chen, Jin Chunshan, and Lin Gao
AISI LRFD Method For Cold-formed Steel Structural Members, Ling En Hsiao, Wei-Wen Yu, and Theodore V. Galambos
Design of automotive structural components using high strength sheet steels effect of strain rate on material properties of sheet steels and structural strengths of cold-formed steel members, Maher Kassar and Wei-Wen Yu
Effect of Strain Rate on Cold-formed Steel Stub Columns, Maher Kassar and Wei-Wen Yu
Uplift Behavior of Purlin Systems Having Discrete Braces, Roger A. LaBoube and M. Golovin
ASCE LRFD Method for Stainless Steel Structures, Shin-Hua Lin, Wei-Wen Yu, and T. V. Galambos
Failure Strengths Of Laminated Glass, Joseph E. Minor and Patrick L. Reznik
Design of automotive structural components using high strength sheet steels structural strength of cold-formed steel members under dynamic loads, Chi-Ling Pan and Wei-Wen Yu
Optimal Placement Of Controllers For Seismic Structures, Chris P. Pantelides and Franklin Y. Cheng
Lateral Load Behavior Of Pile Group In Sand, Shamsher Prakash
Effects of Testing Variables on the Comparison of Neoprene Pad and Sulfur-Nortar Capped Concrete Test Cylinders, David Newton Richardson
Shale Durability Rating System Based on Loss of Shear Strength, David Newton Richardson and Timothy Thomas Wiles
Optimum Assessment Of Irregular Three-dimensional Seismic Buildings, Kevin Z. Truman and Franklin Y. Cheng
Seal Forces In Structural Glazing Systems, C. V.Girija Vallabhan, Gee D. Chou, and Joseph E. Minor
Submissions from 1989
Recursive Optimization For Seismic Steel Frames, Franklin Y. Cheng and D. S. Juang
Load and resistance factor design of cold-formed steel load and resistance factor design specification for cold-formed steel structural members with commentary, Ling-En Hsiao, Wei-Wen Yu, and Theodore V. Galambos
Sludge Digestion By Anaerobic Fluidized Beds. I: Lab Performance Data, Ju-Chang Huang, Bill T. Ray, and Yao Jiang Huang
Design of automotive structural components using high strength sheet steels the effect of strain rate on mechanical properties of sheet steels, Maher Kassar and Wei-Wen Yu
Optimal Design Rules Applied To The Design Of High-speed Mechanisms Under Deflection And Stress Constraints, Frank W. Liou and Jenny Liu
Local Buckling Behavior Of Stiffened Curved Elements, M. B. Parks and Wei-Wen Yu
Cyclic Lateral Loading Of A Large-scale Pile Group, Shamsher Prakash, K. Sreerama, and Sally Prakash
Sludge Digestion By Anaerobic Fluidized Beds. II: Kinetic Model, Bill T. Ray, Ju-Chang Huang, and Brian A. Dempsey
Point Load Test for Estimation of Concrete Compressive Strength, David Newton Richardson
Web-crippling Strength Of Cold-formed Steel Beams, C. Santaputra, M. B. Parks, and Wei-Wen Yu
Permeability of Clays under Organic Permeants, Janardanan O. Uppot and Richard Wesley Stephenson
Multi-stage, Multi-force Dewatering Of Steelmaking Sludges, Johh L. Watson and Yang Wang
Submissions from 1988
Propagating Enclosure Method for Energy Radiation System Analysis, Genda Chen and Gao Lin
A Simplified Method for Estimating Maximum Credible Earthquake Response Spectrum, Genda Chen, Gao Lin, and Hangen Ni
Assessment Of Various Code Provisions Based On Optimum Design Of Steel Structures, Franklin Y. Cheng and D. S. Juang
Dynamic Timoshenko Beam-columns On Elastic Media, Franklin Y. Cheng and Chris P. Pantelides
Static Timoshenko Beam-columns On Elastic Media, Franklin Y. Cheng and Chris P. Pantelides
The Distribution Of Chlorine And Iodine In Soil In The Vicinity Of Lead Mining And Smelting Operations, Bixby Area, S.E. Missouri, U.S.A., R. Fuge, M. J. Andrews, T. E. Clevenger, B. E. Davies, Nord L. Gale, C. F. Paveley, and B. (Bobby) G. Wixson
AISI LRFD Method for Cold-formed Steel Structural Members, Ling-En Hsiao, Wei-Wen Yu, and Theodore V. Galambos
Load and resistance factor design of cold-formed steel comparative study of design methods for cold-formed steel, Ling-En Hsiao, Wei-Wen Yu, and Theodore V. Galambos
Load and resistance factor design of cold-formed steel load and resistance factor design specification for cold-formed steel structural members with commentary, Ling-En Hsiao, Wei-Wen Yu, and Theodore V. Galambos
Strength of Bolted Connections: Is It Bearing Or Net Section?, Roger A. LaBoube
Behavior of Continuous Span Purlin Systems, Roger A. LaBoube, M. Golovin, D. J. Montague, D. C. Perry, and L. L. Wilson
Low-strain-hardening Ductile-steel Cold-formed Members, Roger A. LaBoube, J. N. Macadam, E. J. Schneider, Roger L. Brockenbrough, and Teoman Peköz
ASCE Design Standard for Stainless Steel Structures, Shin-Hau Lin, Wei-Wen Yu, and Theodore V. Galambos
Design of automotive structural components using high strength sheet steels structural strength of cold-formed steel I-beams and hat sections subjected to web crippling load, Shin-Hua Lin, Ling-En Hsiao, Chi-Ling Pan, and Wei-Wen Yu
Design of cold-formed stainless steel structural members proposed allowable stress design specification with commentary, Shin-Hua Lin, Wei-Wen Yu, and Theodore V. Galambos
Load and resistance factor design of cold-formed stainless steel statistical analysis of material properties and development of the LRFD provisions, Shin-Hua Lin, Wei-Wen Yu, and Theodore V. Galambos
A General Correction For Spontaneous Potential Well Logs In Fresh Water, Cary L. McConnell
High Strength Steel Members with Unstiffened Compression Elements, Lan-Cheng Pan and Wei-Wen Yu
Preface, Shamsher Prakash
Prediction and Performance of Piles under Static and Dynamic Loads, Shamsher Prakash, Karunakar Sreerama, and Sally Prakash
Load and resistance factor design of cold-formed steel: Calibration of the AISI design provisions, Wei-Wen Yu, Ling-En Hsiao, and Theodore V. Galambos
Submissions from 1987
Compression and Extension of K//0 Normally Consolidated Kaolin, J. H. Atkinson, David Newton Richardson, and P. J. Robinson
Dynamic Interaction between Substructures, Genda Chen and Gao Lin
Use Of Factor Analysis To Differentiate Pollutants From Other Trace Metals In Surface Soils Of The Mineralized Area Of Madison County, Missouri, U.S.A., Brian E. Davies and Bobby G. Wixson
Dam-Foundation Interaction Effect on Earthquake Response of Concrete Gravity Dams, Gao Lin, Menglin Lou, and Genda Chen
Structural Behavior Of Members Consisting Of Flat And Curved Elements, M. B. Parks and Wei-Wen Yu
Risk Analysis Of BRPL Compressor (Offsites) Foundations, N. Puri, K. Kumar, and Shamsher Prakash
The Sieved Slake Durability Test, David Newton Richardson and J. Long
Soil Shrinkage-Induced Failure of a Foundation, David Newton Richardson, Richard Wesley Stephenson, and D. Molloy
Soil-Shrinkage Induced Structural Failure, David Newton Richardson, Richard Wesley Stephenson, and Daniel Molloy
Regional Differences in Preferences for Median Crossover Signing, Gillian M. Worsey, Charles Dare, and R. N. Schwab
Submissions from 1986
Effects of Stress Path and Stress History on the Stiffness of Reconstituted London Clay, J. H. Atkinson, J. S. Evans, and David Newton Richardson