Submissions from 2015
Mechanical Behavior of Zirconium Diboride-Silicon Carbide-Boron Carbide Ceramics up to 2200 ⁰C, Eric W. Neuman, Greg Hilmas, and William Fahrenholtz
Component Level Tensile Testing of Press & Sinter Steels, Joseph William Newkirk, Tarak A. Amine, and Frank W. Liou
Comparison of Ca(NO₃)₂ and CaCl₂ Admixtures on Reaction, Setting, and Strength Evolutions in Plain and Blended Cementing Formulations, Tandre Oey, Julyan Stoian, Jialin Li, Cecilia Vong, Magdalena Balonis, Aditya Kumar, Wolfram Franke, and Gaurav Sant
Impact Of Stoichiometry On Structural And Optical Properties Of Sputter Deposited Multicomponent Tellurite Glass Films, Okechukwu Ogbuu, Qingyang Du, Hongtao Lin, Lan Li, Yi Zou, Erick Koontz, Charmayne Smith (Lonergan), Sylvain Danto, Kathleen Richardson, and Juejun Hu
The Influence of Filler Type and Surface Area on the Hydration Rates of Calcium Aluminate Cement, Guillermo Puerta-Falla, Aditya Kumar, Lauren Gomez-Zamorano, Mathieu Bauchy, Narayan Neithalath, and Gaurav Sant
Examination of Austenite Solidification and Spheroidal Graphite Growth in Ni-Fe-C Alloys, Jingjing Qing, Von Richards, and David C. Van Aken
Examination of Austenite Solidification and Spheroidal Graphite Growth in Ni-Fe-C Alloys, J. Qing, Von Richards, and D. C. Van Aken
Origins of Optical Absorption Characteristics of Cu²⁺ Complexes in Aqueous Solutions, S. Roger Qiu, Brandon C. Wood, Paul R. Ehrmann, Stavros G. Demos, Philip E. Miller, Kathleen I. Schaffers, Tayyab I. Suratwala, and Richard K. Brow
Evaluation of Long-Term Bone Regeneration in Rat Calvarial Defects Implanted with Strong Porous Bioactive Glass (13-93) Scaffolds, M. N. Rahaman, Yinan Lin, Wei Xiao, Xin Liu, and B. Sonny Bal
Investigation of Stopper Rod Tip Wear on a Thin-Slab Caster, Madeline Rembold, Oscar Chahin, Neal Ross, Bob Williams, and Ronald J. O'Malley
Age-Strengthening of Cast Iron and Its Effects on Machinability: Review of the Literature, Von Richards
High Strain Rate Hot Deformation of Steels: Measurement and Simulation, Seth A. Rummel, David C. Van Aken, Ronald J. O'Malley, X. Wang, and K. Chandrashekhara
Nitriding of Lightweight High Manganese and Aluminum Steels, Sabra C. Serino and Laura Bartlett
Effect of a Weak Fiber Interface Coating in ZrB₂ Reinforced with Long SiC Fibers, Laura Silvestroni, Diletta Sciti, Greg Hilmas, William Fahrenholtz, and Jeremy Lee Watts
Effect of Al/Ni Ratio, Heat Treatment on Phase Transformations and Microstructure of AlₓFeCoCrNi₂₋ₓ (x=0.3, 1) High Entropy Alloys, Harihar Rakshit Sistla, Joseph William Newkirk, and Frank W. Liou
New Insights into the Prehydration of Cement and its Mitigation, Julyan Stoian, Tandre Oey, Jeffrey W. Bullard, Jian Huang, Aditya Kumar, Magdalena Balonis, Judith Terrill, Narayan Neithalath, and Gaurav Sant
Using the Two-Point Bend Technique to Determine Failure Stress of Pristine Glass Fibers, Zhongzhi Tang, Nathan P. Lower, Prabhat K. Gupta, Charles R. Kurkjian, and Richard K. Brow
Inclusion Modification in Si-Mn Killed Steels using Titanium Addition, Vivek Thapliyal, Abhishek Kumar, David Robertson, and Jeffrey Smith
Transient Inclusion Formation and Evolution in Silicon Killed Steels, V. Thapliyal, Aditya Kumar, D. G. C. Robertson, and James Smith
Freeform Extrusion Fabrication of Titanium Fiber Reinforced Bioactive Glass Scaffolds, Albin Thomas, Krishna C. R. Kolan, Ming-Chuan Leu, and Greg Hilmas
Polymer Nanostructures Synthesized by Controlled Living Polymerization for Tumor-Targeted Drug Delivery, Christine E. Wang, Patrick S. Stayton, Suzie H. Pun, and Anthony J. Convertine
Evaluation of Three-Dimensional Silver-Doped Borate Bioactive Glass Scaffolds for Bone Repair: Biodegradability, Biocompatibility, and Antibacterial Activity, Hui Wang, Shichang Zhao, Xu Cui, Yangyi Pan, Wenhai Huang, Song Ye, Shihua Luo, M. N. Rahaman, Changqing Zhang, and Deping Wang
Three-Dimensional Zinc Incorporated Borosilicate Bioactive Glass Scaffolds for Rodent Critical-Sized Calvarial Defects Repair and Regeneration, Hui Wang, Shichang Zhao, Wei Xiao, Xu Cui, Wenhai Huang, M. N. Rahaman, Changqing Zhang, and Deping Wang
Biocompatibility and Osteogenic Capacity of Borosilicate Bioactive Glass Scaffolds Loaded with Fe₃O₄ Magnetic Nanoparticles, Hui Wang, Shichang Zhao, Jie Zhou, Kaiping Zhu, Xu Cui, Wenhai Huang, M. N. Rahaman, Changqing Zhang, and Deping Wang
Modeling and Simulation of Hot Rolling using Nonlinear Material Models, Xin Wang, K. Chandrashekhara, Seth A. Rummel, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Angiogenic Effect of Bioactive Borate Glass Microfibers and Beads in the Hairless Mouse, Richard J. Watters, Roger F. Brown, and D. E. Day
An Efficient and Cost-Effective Method for Preparing Transmission Electron Microscopy Samples from Powders, Haiming Wen, Yaojun Lin, David N. Seidman, Julie M. Schoenung, Isabella Johanna Van Rooyen, and Enrique J. Lavernia
Fission Products Distribution in Triso Coated Fuel Particles Irradiated to 3.22 X 10²¹ n/cm² Fast Fluence at 1092°C, Haiming Wen, Isabella Johanna Van Rooyen, Connie M. Hill, Tammy L. Trowbridge, and Ben D. Coryell
Advanced Electron Microscopy Study of Fission Product Distribution in the Failed Sic Layer of a Neutron Irradiated Triso Coated Particle, Haiming Wen, Isabella Johanna Van Rooyen, John D. Hunn, Tyler J. Gerczak, Charles A. Baldwin, and Fred C. Montgomery
Enhancement of MHC-I Antigen Presentation Via Architectural Control of PH-Responsive, Endosomolytic Polymer Nanoparticles, John T. Wilson, Almar Postma, Salka Keller, Anthony J. Convertine, Graeme Moad, Ezio Rizzardo, Laurence Meagher, John Chiefari, and Patrick S. Stayton
Erratum: Evaluation of Ti Implants Coated with Ag-Containing Borate Bioactive Glass for Simultaneous Eradication of Infection and Fracture Fixation in a Rabbit Tibial Model (Journal of Materials Research (2012) Doi: 10.1557/jmr.2012.375), Wei Xiao, Shihua Luo, Xiajuan Wei, Changqing Zhang, Wenhai Huang, Jiakang Chen, Yong Cai, Yong Rui, and M. N. Rahaman
Composition- and Pressure-Induced Ferroelectric to Antiferroelectric Phase Transitions in Sm-Doped BiFeO₃ System, Fei Xue, Linyun Liang, Yijia Gu, Ichiro Takeuchi, Sergei V. Kalinin, and Long-Qing Chen
Evolution of the Statistical Distribution in a Topological Defect Network, Fei Xue, Xueyun Wang, Ion Socolenco, Yijia Gu, LongQing Chen, and Sang-Wook Cheong
High Performance Mg6Zn Nanocomposites Fabricated through Friction Stir Processing, Jiaquan Xu, Chezheng Cao, Shamiparna Das, Lianyi Chen, Chao Ma, Rajiv S. Mishra, and Xiaochun Li
Direct Laser Deposition of Ti-6Al-4V from Elemental Powder Blends, Lei Yan, Xueyang Chen, Wei Li, Frank W. Liou, and Joseph William Newkirk
Emergence of Grain-Size Effects in Nanocrystalline Metals from Statistical Activation of Discrete Dislocation Sources, Rui Yuan, Irene J. Beyerlein, and Caizhi Zhou
A Microstructure and Hardness Study of Functionally Graded Materials Ti6Al4V/TiC by Laser Metal Deposition, Jingwei Zhang, Yunlu Zhang, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, and William J. Seufzer
Evaluation of Injectable Strontium-Containing Borate Bioactive Glass Cement with Enhanced Osteogenic Capacity in a Critical-Sized Rabbit Femoral Condyle Defect Model, Yadong Zhang, Xu Cui, Shichang Zhao, Hui Wang, M. N. Rahaman, Zhongtang Liu, Wenhai Huang, and Changqing Zhang
Microstructure and Property of TiB-Reinforced Ti Alloy Composites by Laser Metal Deposition, Yunlu Zhang, Jingwei Zhang, Frank W. Liou, and Joseph William Newkirk
Wound Dressings Composed of Copper-Doped Borate Bioactive Glass Microfibers Stimulate Angiogenesis and Heal Full-Thickness Skin Defects in a Rodent Model, Shichang Zhao, Le Li, Hui Wang, Yadong Zhang, Xiangguo Cheng, Nai Zhou, M. N. Rahaman, Zhongtang Liu, Wenhai Huang, and Changqing Zhang
Copper-Doped Borosilicate Bioactive Glass Scaffolds with Improved Angiogenic and Osteogenic Capacity for Repairing Osseous Defects, Shichang Zhao, Hui Wang, Yadong Zhang, Wenhai Huang, M. N. Rahaman, Zhongtang Liu, Deping Wang, and Changqing Zhang
Dynamic Phases, Pinning, and Pattern Formation for Driven Dislocation Assemblies, Caizhi Zhou, Charles Reichhardt, Cynthia Olson Reichhardt, and Irene J. Beyerlein
Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part II: Experimental Validation and Applications, Tihe Zhou, Peng Zhang, Ronald J. O'Malley, Hatem S. Zurob, and Mani Subramanian
Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part I: Coarsening Mechanism and Particle Pinning Effects, Tihe Zhou, Hatem S. Zurob, Ronald J. O'Malley, and Kashif Rehman
Submissions from 2014
Microstructural and Hardness Investigation of Tool Steel D2 Processed by Laser Surface Melting and Alloying, Tarak A. Amine, Joseph William Newkirk, Hussam El Din F El-Sheikh, and Frank W. Liou
An Investigation of the Effect of Direct Metal Deposition Parameters on the Characteristics of the Deposited Layers, Tarak A. Amine, Joseph William Newkirk, and Frank W. Liou
An Investigation of the Effect of Laser Deposition Parameters on Characteristics of Multilayered 316 L Deposits, Tarak A. Amine, Joseph William Newkirk, and Frank W. Liou
Investigation of Effect of Process Parameters on Multilayer Builds by Direct Metal Deposition, Tarak A. Amine, Joseph William Newkirk, and Frank W. Liou
Numerical Simulation of the Thermal History Multiple Laser Deposited Layers, Tarak A. Amine, Joseph William Newkirk, and Frank W. Liou
Phase-Field Crystal Model for Fe Connected to MEAM Molecular Dynamics Simulations, Ebrahim Asadi, Mohsen Asle Zaeem, and Michael I. Baskes
Effect of Vacancy Defects on Generalized Stacking Fault Energy of FCC Metals, Ebrahim Asadi, Mohsen Asle Zaeem, Amitava Moitra, and Mark A. Tschopp
An Elastic Phase Field Model for Thermal Oxidation of Metals: Application to Zirconia, Mohsen Asle Zaeem and Haitham El Kadiri
High Manganese and Aluminum Steels for the Military and Transportation Industry, Laura Bartlett and David C. Van Aken
An Atom Probe Study of Kappa Carbide Precipitation and the Effect of Silicon Addition, Laura Bartlett, David C. Van Aken, Julia E. Medvedeva, Dieter Isheim, Nadezhda I. Medvedeva, and Kai Song
Vision-Based Defect Detection in Laser Metal Deposition Process, Shyam Barua, Frank W. Liou, Joseph William Newkirk, and Todd E. Sparks
Healing of Critical-Size Segmental Defects in Rat Femora using Strong Porous Bioactive Glass Scaffolds, Lianxiang Bi, Brett Zobell, Xin Liu, M. N. Rahaman, and Lynda Bonewald
Corrosion-Resistant Glasses for Steel Enamels, Richard K. Brow, Signo Tadeu Dos Reis, Michael L. Koenigstein, and Genda Chen
Microstructural Evolution of Cerium-Based Coatings on AZ31 Magnesium Alloys, Carlos E. Castano, Matthew O'Keefe, and William Fahrenholtz
The Effect of Coiling Temperature on the Microstructure and Mechanical Properties of a Niobium–Titanium Microalloyed Steel Processed via Thin Slab Casting, V. S. A. Challa, W. H. Zhou, R. D. K. Misra, Ronald J. O'Malley, and S. G. Jansto
Computational Metallurgy, Long-Qing Chen and Yijia Gu
A Novel Injectable Borate Bioactive Glass Cement for Local Delivery of Vancomycin to Cure Osteomyelitis and Regenerate Bone, Xu Cui, Cunju Zhao, Yifei Gu, Le Li, Hui Wang, Wenhai Huang, Nai Zhou, Deping Wang, Yi Zhu, Jun Xu, Shihua Luo, Changqing Zhang, and M. N. Rahaman
Effects of Temperature and the Incorporation of W on the Oxidation of ZrB₂ Ceramics, Maryam Kazemzadeh Dehdashti, William Fahrenholtz, and Greg Hilmas
Evaluation of Borate Bioactive Glass Scaffolds with Different Pore Sizes in a Rat Subcutaneous Implantation Model, Aylin M. Deliormanli, Xin Liu, and M. N. Rahaman
Understanding the Agglomeration Behavior of Nickel Laterite and Gold Ores using Statistical Design of Experiments, Nikhil Dhawan, M. Sadegh Safarzadeh, Jan D. Miller, Michael S. Moats, and Michael L. Free
A Novel Injectable Borate Bioactive Glass Cement As an Antibiotic Delivery Vehicle for Treating Osteomyelitis, Hao Ding, Cunju Zhao, Xu Cui, Yifei Gu, Weitao Jia, M. N. Rahaman, Yang Wang, Wenhai Huang, and Changqing Zhang
Thermal Decomposition Behavior of Oligo(4-Hydroxyquinoline), Fatih Dogan
6-Hydroxyquinoline Oligomers Emit White Light, Fatih Dogan, Ali Bilici, Mehmet Ercengiz Yildirim, and Ismet Kaya
Vanadium Doped Nanostructured TiO₂ Dielectrics, Fatih Dogan, Sheng Chao, Jing Peng, and Steven G. Greenbaum
Nanostructured Dielectric Materials for High Energy Density Multilayer Ceramic Capacitors, Fatih Dogan, Alan Devoe, and Ian Burn
Ceramics for Environmental and Energy Applications II: Ceramic Transactions, Volume 246, Fatih Dogan, Terry M. Tritt, Tohru Sekino, Yutai Katoh, and Aleksander J. Pyzik
Ceramic Transactions: Preface, Fatih Dogan, Terry M. Tritt, Tohru Sekino, Yutai Katoh, Aleksander J. Pyzik, Ilias Belharouak, Aldo R. Boccaccini, and James C. F. Marra
A Mechanical Testing Methodology for Additive Manufacturing Processes, Sujitkumar Dongare, Todd E. Sparks, Joseph William Newkirk, and Frank W. Liou
Effect of Resistance Spot Welding Parameters on Weld Pool Properties in a DP600 Dual-Phase Steel: A Parametric Study using Thermomechanically-Coupled Finite Element Analysis, Mohsen Eshraghi, Mark A. Tschopp, Mohsen Asle Zaeem, and Sergio D. Felicelli
A Historical Perspective on Research Related to Ultra-High Temperature Ceramics, William Fahrenholtz, Eric J. Wuchina, William Edward Lee, and Yanchun Zhou
Introduction, William Fahrenholtz, Eric J. Wuchina, William Edward Lee, and Yanchun Zhou
Direct Observation of Nanoscale Peltier and Joule Effects at Metal-Insulator Domain Walls in Vanadium Dioxide Nanobeams, Tela Favaloro; Joonki Suh; Bjorn Vermeersch; Kai Liu; Yijia Gu; and For full list of authors, see publisher's website.
Investigation of Forged-Like Microstructure Produced by a Hybrid Manufacturing Process, Romy Francis, Joseph William Newkirk, and Frank W. Liou
Hydrometallurgical Processing, Michael L. Free and Michael S. Moats
Influence of Ti Addition and Sintering Method on Microstructure and Mechanical Behavior of a Medium-Entropy Al₀.₆CoNiFe Alloy, Zhiqiang Fu, Weiping Chen, Zhen Chen, Haiming Wen, and Enrique J. Lavernia
Nanocrystalline Rare Earth Phosphates from Glass Dissolution and Precipitation Reactions, Jaime George, Colin Ryan, and Richard K. Brow
Color Bleaching and Oxygen Diffusion in a Niobium Phosphate Glass, L. Ghussn, R. M. C. V. Reis, Richard K. Brow, and D. B. Baker
Electric-Field Induced Ferromagnetic Phase in Paraelectric Antiferromagnets, Maya D. Glinchuk, Eugene A. Eliseev, Yijia Gu, Long-Qing Chen, Venkatraman Gopalan, and Anna N. Morozovska
Localized Hyperthermia with Iron Oxide-Doped Yttrium Microparticles: Steps toward Image-Guided Thermoradiotherapy in Liver Cancer, Andrew C. Gordon, Robert J. Lewandowski, Riad A. Salem, D. E. Day, Reed A. Omary, and Andrew C. Larson
Sintering, Grain Growth, and Phase Composition of Gd₂O₃-Stabilized ZrO₂ Powders, Jacob R. Gross, M. N. Rahaman, and Rollie E. Dutton
In Vivo Evaluation of Scaffolds with a Grid-Like Microstructure Composed of a Mixture of Silicate (13-93) and Borate (13-93B3) Bioactive Glasses, Yifei Gu, Wenhai Huang, and M. N. Rahaman
Biodegradable Borosilicate Bioactive Glass Scaffolds with a Trabecular Microstructure for Bone Repair, Yifei Gu, Gang Wang, Xin Zhang, Yadong Zhang, Changqing Zhang, Xin Liu, M. N. Rahaman, Wenhai Huang, and Haobo Pan
Flexoelectricity and Ferroelectric Domain Wall Structures: Phase-Field Modeling and DFT Calculations, Yijia Gu; Menglei Li; Anna N. Morozovska; Yi Wang; Eugene A. Eliseev; and For full list of authors, see publisher's website.
Monoclinic Phases Arising Across Thermal Inter-Ferroelectric Phase Transitions, Yijia Gu; Fei Xue; Shiming Lei; Tom T. A. Lummen; Jianjun Wang; and For full list of authors, see publisher's website.
An Experimental Study on Bending Fatigue Test with a Krouse-Type Fatigue Specimen, Ahmed S. Haidyrah, Carlos Henry Castano Giraldo, and Joseph William Newkirk
Microstructure and Strengthening Mechanisms in an Ultrafine Grained Al-Mg-Sc Alloy Produced by Powder Metallurgy, Tammy J. Harrell, Troy D. Topping, Haiming Wen, Tao Hu, Julie M. Schoenung, and Enrique J. Lavernia
Thermal Conductivity of ZrB₂ and HfB₂, Gregory J K Harrington and Greg Hilmas
Review and Modeling of Energy Efficiency in American Steel Foundries, Jianxun He, Siddhartha Biswas, Todd P. Sander, Semen Naumovich Lekakh, Jeffrey D. Smith, Von Richards, and Kent D. Peaslee
Spinel-Based Refractories for Improved Performance in Coal Gasification Environments, James G. Hemrick, Beth Armstrong, Angela Rodrigues-Schroer, Dominick Colavito, and Jeffrey D. Smith
Development and Application of Improved Shotctrete Refractory for Aluminum Rotary Furnace Applications, James G. Hemrick, Angela Rodrigues-Schroer, Dominick Colavito, Jeffrey D. Smith, and Kelley O'Hara
Ceramic Welds, and a Method for Producing the Same, Greg Hilmas, William Fahrenholtz, Jeremy Lee Watts, and Harlan James Brown-Shaklee
Structure of Na₂O-GeO₂-P₂O₅ Glasses by X-Ray and Neutron Diffraction, Uwe Hoppe, N. P. Wyckoff, Richard K. Brow, M. Von Zimmermann, and A. C. Hannon
Interfacial Interactions between an Alkali-Free Borosilicate Viscous Sealing Glass and Aluminized Ferritic Stainless Steel, Jenhsien Hsu, Cheol-Woon Kim, and Katherine A. Brow
An Alkali-Free Barium Borosilicate Viscous Sealing Glass for Solid Oxide Fuel Cells, Jenhsien Hsu, Cheol-Woon Kim, Richard K. Brow, Joe Szabo, Ray Crouch, and Rob Baird
The Performance of Inconel 693 Electrodes for Processing an Iron Phosphate Glass Melt Containing 26 Wt.% of a Simulated Low Activity Waste, Jenhsien Hsu, Joseph William Newkirk, Cheol-Woon Kim, Richard K. Brow, Mark E. Schlesinger, C. S. Ray, and D. E. Day
Metal Recovery Applications using a Combination of Ion Exchange and Electrowinning using Emew® Technology, A. Janwong, T. Bergfeldt, and Michael S. Moats
