Submissions from 2017
Guest editors' preface, Aldo R. Boccaccini, Michael B. Fenn, Julian R. Jones, Toshihiro Kasuga, M. Grant Norton, M. N. Rahaman, Enrica Verne, and Edgar Dutra Zanotto
Hot Rolling Effect upon the High Temperature Johnson-Cook Strength and Failure Models for a 15V38 Grade Steel, Mario F. Buchely, David C. Van Aken, Ronald J. O'Malley, K. Chandrashekhara, and Semen Naumovich Lekakh
The Dissolution Behavior in Alkaline Solutions of a Borosilicate Glass with and without P₂O₅, Xiaoming Cheng, Richard K. Brow, and Genda Chen
In Vitro Stimulation of Vascular Endothelial Growth Factor by Borate-Based Glass Fibers under Dynamic Flow Conditions, Sisi Chen, Qingbo Yang, Richard K. Brow, Kun Liu, Katherine A. Brow, Yinfa Ma, and Honglan Shi
Design and Fabrication of Functionally Graded Material from Ti to γ-TiAl by Laser Metal Deposition, Xueyang Chen, Lei Yan, Joseph William Newkirk, and Frank W. Liou
Mechanism and Sensitivity of Fe-C Coated Long Period Fiber Grating Sensors for Steel Corrosion Monitoring of RC Structures, Yizheng Chen, Fujian Tang, Yan Tang, Matthew O'Keefe, and Genda Chen
Nonlinear Optical Properties Of GeSbS Chalcogenide Waveguides, Ju Won Choi, Byoung Uk Sohn, George F.R. Chen, Dawn T.H. Tan, Zhaohong Han, Lionel C. Kimerling, Charmayne Smith (Lonergan), Kathleen A. Richardson, and Anuradha M. Agarwal
New Insights into the Structure, Chemistry, and Properties of Cu₄SnS₄, Amitava Choudhury, Sudip Mohapatra, Hooman Yaghoobnejad Asl, Senghuat Lee, Yew San Hor, Julia E. Medvedeva, Devon L. McClane, Greg Hilmas, Michael A. McGuire, Andrew May, Hsin Wang, Shreeram Dash, Aaron Welton, Punit Boolchand, Kasey P. Devlin, Jennifer A. Aitken, Regine Herbst-Irmer, and Vaclav Petricek
Slip Activation Controlled Nanohardness Anisotropy of ZrB₂ Ceramic Grains, Tamas Csanadi, Alexander Kovalcíkova, Jan Dusza, William Fahrenholtz, and Greg Hilmas
Enhanced Osteointegration of Poly(Methylmethacrylate) Bone Cements by Incorporating Strontium-Containing Borate Bioactive Glass, Xu Cui, Chengcheng Huang, Meng Zhang, Changshun Ruan, Songlin Peng, Li Li, Wenlong Liu, Ting Wang, Bing Li, Wenhai Huang, M. N. Rahaman, William Weijia Lu, and Haobo Pan
Evaluation of an Injectable Bioactive Borate Glass Cement to Heal Bone Defects in a Rabbit Femoral Condyle Model, Xu Cui, Wenhai Huang, Yadong Zhang, Chengcheng Huang, Zunxiong Yu, Lei Wang, Wenlong Liu, Ting Wang, Jie Zhou, Hui Wang, Nai Zhou, Deping Wang, Haobo Pan, and M. N. Rahaman
Synthetic Macromolecular Antibiotic Platform for Inhalable Therapy Against Aerosolized Intracellular Alveolar Infections, Debobrato Das, Jasmin Chen, Selvi Srinivasan, Abby M. Kelly, Brian Lee, Hye-Nam Son, Frank Radella, T. Eoin West, Daniel M. Ratner, Anthony J. Convertine, Shawn J. Skerrett, and Patrick S. Stayton
Scaffold for Tissue Regeneration in Mammals, D. E. Day, Steven B. Jung, and Roger F. Brown
Re-Examining the Influence of the Inclusion Characteristics on the Drying Shrinkage of Cementitious Composites, Galen Egan, Aditya Kumar, Narayan Neithalath, and Gaurav Sant
The Role of Ceramic and Glass Science Research in Meeting Societal Challenges: Report from an NSF-Sponsored Workshop, Katherine T. Faber; Tewodros Asefa; Monika Backhaus-Ricoult; Richard K. Brow; Julie Y. Chan; Shen Dillon; William Fahrenholtz; and For full list of authors, see publisher's website.
Ultra-High Temperature Ceramics: Materials for Extreme Environments, William Fahrenholtz and Greg Hilmas
Corrosion Mechanism of Cathodic Protected Transmission Pipeline Steel with Damaged Enamel Coatings, Liang Fan, Signo Tadeu Dos Reis, Genda Chen, and Michael L. Koenigstein
Corrosion Resistance of Transmission Pipeline Steel Coated with Five Types of Enamels, Liang Fan, Fujian Tang, Signo Tadeu Dos Reis, Genda Chen, and Michael L. Koenigstein
Corrosion Resistances of Steel Pipes Internally Coated with Enamel, Liang Fan, Fujian Tang, Signo Tadeu Dos Reis, Genda Chen, and Michael L. Koenigstein
Albumin Conformational Change and Aggregation Induced by Nanostructured Apatites, Kenan P. Fears, Corey T. Love, and D. E. Day
On the Prediction of α-Martensite Temperatures in Medium Manganese Steels, Daniel M. Field, Daniel S. Baker, and David C. Van Aken
Tensile Behavior of Medium-Mn Steels that Exhibit Two-stage TRIP Behavior, Daniel M. Field and David C. Van Aken
Producing volatiles from Asteroid simulants: Preliminary results, Leslie S. Gertsch, Egboche Unobe, Mark E. Schlesinger, Angel Abbud-Madrid, Christopher Brian Dreyer, Joel C. Sercel, Robert Jedicke, Alexander N. Krot, Diane L. Linne, and James G. Mantovani
A Novel Freeform Extrusion Fabrication Process for Producing Solid Ceramic Components with Uniform Layered Radiation Drying, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, and Greg Hilmas
Additive Manufacturing and Mechanical Characterization of High Density Fully Stabilized Zirconia, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Jeremy Lee Watts, and Greg Hilmas
Mechanical Characterization of Parts Produced by Ceramic On-Demand Extrusion Process, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Jeremy Lee Watts, and Greg Hilmas
An Optical Method for Characterizing Carbon Content in Ceramic Pot Filters, J. Y. Goodwin, A. Curt Elmore, Carlo Salvinelli, and Mary R. Reidmeyer
Studying Chromium and Nickel Equivalency to Identify Viable Additive Manufacturing Stainless Steel Chemistries, Zachary T. Hilton, Joseph William Newkirk, and Ronald J. O'Malley
Effect of Sintering Aids on the Microstructure and Oxidation Behavior of Hot-Pressed Zirconium Silicate Ceramic, Shifeng Huang, Qinggang Li, Zhi Wang, Xin Cheng, and Haiming Wen
Nanograin Size Effects on the Strength of Biphase Nanolayered Composites, Sixie Huang, Irene J. Beyerlein, and Caizhi Zhou
Modeling and Simulation of Nanoindentation, Sixie Huang and Caizhi Zhou
Controlling Calcium Compound Formation in Biocompatible Materials for Tissue Regeneration and Repair in Mammals, Steven B. Jung and D. E. Day
Influence of Gage Length on Miniature Tensile Characterization of Powder Bed Fabricated 304L Stainless Steel, Sreekar Karnati, Jack L. Hoerchler, Frank W. Liou, and Joseph William Newkirk
Peroxidase/H₂O₂ Catalyzed Oxidative Oligomerization of 1-Aminopyrene, Ismet Kaya, Ali Bilici, Ruhiye Nilay Tezel, Kevser Temizkan, and Fatih Dogan
Enzyme-Cleavable Polymeric Micelles for the Intracellular Delivery of Proapoptotic Peptides, Hanna B. Kern, Selvi Srinivasan, Anthony J. Convertine, David M. Hockenbery, Oliver W. Press, and Patrick S. Stayton
Inorganic Biodegradable Substrates for Devices and Systems, Chang-Soo Kim, Richard K. Brow, and D. E. Day
3D Bioprinting of Polymer Bioactive Glass Composite and MSCs for Bone Repair, Krishna C. R. Kolan, Caroline Murphy, Jakeb Baldridge, Julie A. Semon, D. E. Day, and Ming-Chuan Leu
Solvent Based 3D Printing of Biopolymer/Bioactive Glass Composite and Hydrogel for Tissue Engineering Applications, Krishna Kolan, Yong Liu, Jakeb Baldridge, Caroline Murphy, Julie A. Semon, D. E. Day, and Ming-Chuan Leu
Effects of Area Fraction and Part Spacing on Degradation of 304L Stainless Steel Powder in Selective Laser Melting, Cairlin S. Kriewall, Austin T. Sutton, Sreekar Karnati, Joseph William Newkirk, and Ming-Chuan Leu
The Filler Effect: The Influence of Filler Content and Type on the Hydration Rate of Tricalcium Silicate, Aditya Kumar, Tandre Oey, Gabriel Falzone, Jian Huang, Mathieu Bauchy, Magdalena Balonis, Narayan Neithalath, Jeffrey W. Bullard, and Gaurav Sant
Communication: Characterization of Spatial Distribution of Graphite Nodules in Cast Iron, Semen Naumovich Lekakh
Optimization of Melt Treatment for Austenitic Steel Grain Refinement, Semen Naumovich Lekakh, Jun Ge, Von Richards, Ronald J. O'Malley, and Jessica R. TerBush
Control of Columnar to Equiaxed Transition in Solidification Macrostructure of Austenitic Stainless Steel Castings, Semen Naumovich Lekakh, Ronald J. O'Malley, Mark C. Emmendorfer, and Brenton Hrebec
Fabrication and Characterization of a Functionally Graded Material from Ti-6Al-4V to SS316 by Laser Metal Deposition, Wei Li, Sreekar Karnati, Caitlin S. Kriewall, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, and William J. Seufzer
Investigation on Ti6Al4V-V-Cr-Fe-SS316 Multi-Layers Metallic Structure Fabricated by Laser 3D Printing, Wei Li, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, and William J. Seufzer
Ti6Al4V/SS316 Multi-Metallic Structure Fabricated by Laser 3D Printing and Thermodynamic Modeling Prediction, Wei Li, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, and William J. Seufzer
Ti-Fe Intermetallics Analysis and Control in Joining Titanium Alloy and Stainless Steel by Laser Metal Deposition, Wei Li, Lei Yan, Sreekar Karnati, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, and William J. Seufzer
Fabricating Ceramic Components with Water Dissolvable Support Structures by the Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin McMillen, Ming-Chuan Leu, Greg Hilmas, and Jeremy Lee Watts
Fabricating Zirconia Components with Organic Support Material by the Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin McMillen, Andrew Scherff, Ming-Chuan Leu, and Greg Hilmas
Fabricating Zirconia Parts with Organic Support Material by the Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin McMillen, Andrew Scherff, Ming-Chuan Leu, and Greg Hilmas
Epitaxial Lift-Off of Electrodeposited Single-Crystal Gold Foils for Flexible Electronics, Naveen K. Mahenderkar, Qingzhi Chen, Ying-Chau Liu, Alexander R. Duchild, Seth Hofheins, Eric Chason, and Jay A. Switzer
The Physical Characteristics of Electrorefined Copper Starter Sheet Material, Daniel Majuste, Paul Laforest, and Michael S. Moats
Dissolution Behavior of Na₂O-FeO-Fe₂O₃-P₂O₅ Glasses, Lina Ma, Richard K. Brow, and Mark E. Schlesinger
Solidification Behavior in Reduced Gravity, Douglas M. Matson, Robert W. Hyers, Amber Genau, and Mohsen Asle Zaeem
First-Principles Study of Phosphorus Embrittlement in Austenitic Steels with Κ-Carbide Precipitates, N. I. Medvedeva, David C. Van Aken, and Julia E. Medvedeva
Rheology, Hydration, and Strength Evolution of Interground Limestone Cement Containing PCE Dispersant and High Volume Supplementary Cementitious Materials, Iman Mehdipour, Aditya Kumar, and Kamal Khayat
Effective Mechanical Properties of Multilayer Nano-Heterostructures, T Mukhopadhyay, A Mahata, S Adhikari, and Mohsen Asle Zaeem
Effective Elastic Properties of Two Dimensional Multiplanar Hexagonal Nanostructures, T. Mukhopadhyay, A. Mahata, S. Adhikari, and Mohsen Asle Zaeem
3D Bioprinting of Stem Cells and Polymer/Bioactive Glass Composite Scaffolds for Bone Tissue Engineering, Caroline Murphy, Krishna Kolan, Wenbin Li, Julie A. Semon, D. E. Day, and Ming-Chuan Leu
Temperature Dependent Switchable Superamphiphobic Coating on Steel Alloy Surface, Debasis Nanda, T. Swetha, Priya Varshney, P. K. Gupta, Soumya S. Mohapatra, and Aditya Kumar
Single Step Method to Fabricate Durable Superliquiphobic Coating on Aluminum Surface with Self-Cleaning and Anti-Fogging Properties, Debasis Nanda, Priya Varshney, M. Satapathy, Soumya S. Mohapatra, Bharat Bhushan, and Aditya Kumar
Self-Assembled Monolayer of Functionalized Silica Microparticles for Self-Cleaning Applications, Debasis Nanda, Priya Varshney, M. Satapathy, Soumya S. Mohapatra, and Aditya Kumar
Factorial Design to Minimize Residual Oxygen in Reaction Hot-Pressed Zirconium Diboride, Eric W. Neuman, William Fahrenholtz, and Greg Hilmas
A High Strength Alumina-Silicon Carbide-Boron Carbide Triplex Ceramic, Eric W. Neuman, Greg Hilmas, and William Fahrenholtz
Processing, Microstructure, and Mechanical Properties of Zirconium Diboride-Boron Carbide Ceramics, Eric W. Neuman, Greg Hilmas, and William Fahrenholtz
Computational Modelling for Phase Transformation Prediction in Cast Aluminum-iron-silicon Alloys Modern IT Technologies for Materials Science Applications, J. W. Newkirk, T. A. Amine, Alexander S. Zhilin, Valerija R. Yalunina, Vladimir V. Tokarev, Viktor A. Bykov, and Jianguo Li
Topological Controls on the Dissolution Kinetics of Glassy Aluminosilicates, Tandre Oey, Aditya Kumar, Isabella Pignatelli, Yingtian Yu, Narayan Neithalath, Jeffrey W. Bullard, Mathieu Bauchy, and Gaurav Sant
Inclusion Evolution and Removal in Ladle Refining, Ronald J. O'Malley
Influence of Mold Flux Crystallite Film Fracture on Thermal Fluctuations in a Thin Slab Funnel Mold, Ronald J. O'Malley, E. I. Peterson, Jeffrey D. Smith, S. Jauch, M. McClymonds, and N. Sutcliffe
Investigation of Mold Flux Crystallization by Rapid Quenching and Isothermal Aging in Molten Tin, Elizabeth I. Peterson, T. P. Sander, Jeffrey D. Smith, and Ronald J. O'Malley
Growth Stages and Hexagonal-Rhombohedral Structural Arrangements in Spheroidal Graphite Observed in Ductile Iron, Jingjing Qing, Von Richards, and David C. Van Aken
Solid Silver Embrittlement of Ti-6Al-2Sn-4Zr-2Mo Alloy, Jingjing Qing, David C. Van Aken, Mario F. Buchely, Michael A. Walker, Royle W. Juusola, and John E. Goethe
Ceramic Processing and Sintering, Second Edition, M. N. Rahaman
Chapter 7: Bioactive Glass Products Produced Via Sintering, M. N. Rahaman, Wenhai Huang, and B. Sonny Bal
Bioactive Glass Composites for Bone and Musculoskeletal Tissue Engineering, M. N. Rahaman, W. Xiao, and W. Huang
Ceramic Processing, Mohamed N. Rahaman
Heterogeneous Nucleation on Platinum Doped Li₂O·2SiO₂ Glass by Differential Thermal Analysis, Kisa S. Ranasinghe, C. S. Ray, D. E. Day, and Gregory Humble
Iron Phosphate Glass Waste Forms for Vitrifying Hanford AZ102 Low Activity Waste (LAW), Part I: Glass Formation Model, C. S. Ray, V. A. Samaranayake, Ali Mohammadkhah, Thomas E. Day, and D. E. Day
Structural Study of Chemically Durable BaO-FeOₓ-P₂O₅ Glasses by Mössbauer Spectroscopy and High Performance Liquid Chromatography, Akira Saitoh, Naoto Kitamura, Lina Ma, Parker Freudenberger, Amitava Choudhury, Hiromichi Takebe, and Richard K. Brow
Fabrication of Superhydrophobic and Superoleophilic Polymer Composite Coatings on Cellulosic Filter Paper for Oil-Water Separation, M. Satapathy, Priya Varshney, D. Nanda, Anita Panda, Soumya S. Mohapatra, and Aditya Kumar
Super-Strong Materials for Temperatures Exceeding 2000 ⁰C, Laura Silvestroni, Hans Joachim Kleebe, William Fahrenholtz, and Jeremy Lee Watts
Evidence Of Spatially Selective Refractive Index Modification In 15GeSe2-45As2Se3-40PbSe Glass Ceramic Through Correlation Of Structure And Optical Property Measurements For GRIN Applications, Laura Sisken, Charmayne Smith (Lonergan), Andrew Buff, Myungkoo Kang, Karima Chamma, Peter Wachtel, J. David Musgraves, Clara Rivero-Baleine, Andrew Kirk, Matthew Kalinowski, Megan Melvin, Theresa S. Mayer, and Kathleen Richardson
Aluminum Matrix Syntactic Foam Fabricated with Additive Manufacturing, M. Spratt, Joseph William Newkirk, and K. Chandrashekhara
Characterization of Heat-Affected Powder Generated during Selective Laser Melting of 304L Stainless Steel Powder, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, and Joseph William Newkirk
Powder Characterization Techniques and Effects of Powder Characteristics on Part Properties in Powder-Bed based Additive Manufacturing: A Review, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, and Joseph William Newkirk
Freeform Extrusion Fabrication of Titanium Fiber Resuborced -93 Bioactive Glass Scaffolds, Albin Thomas, Krishna C. R. Kolan, Ming-Chuan Leu, and Greg Hilmas
Freeform Extrusion Fabrication of Titanium Fiber Resuborced -93 Bioactive Glass Scaffolds, Albin Thomas, Krishna C. R. Kolan, Ming-Chuan Leu, and Greg Hilmas
Effect of Foundry Waste on the Mechanical Properties of Portland Cement Concrete, Anthony S. Torres, Laura Bartlett, and Cole Pilgrim
Sensor Substrates Based on Biodegradable Glass Materials, Kassan Unda, Ali Mohammadkhah, Kwangman Lee, D. E. Day, Matthew O'Keefe, and Chang-Soo Kim
Advanced Electron Microscopy and Micro Analytical Technique Development and Application for Irradiated TRISO Coated Particles from the AGR-1 Experiment, Isabella Johanna Van Rooyen, Thomas Martin Lillo, Haiming Wen, Karen Elizabeth Wright, James Wayne Madden, and Jeffery Andrew Aguiar
Environmentally Benign Passivation for LHE ZnNi, S. M. Volz, J. B. Claypool, Matthew O'Keefe, and William Fahrenholtz
Effects of Iron Concentration and Redox States on Failure of Boron-free E-glass Fibres under Applied Stress in Different Conditions, Qingwei Wang, Richard K. Brow, Hong Li, and Erica Ann Ronchetto
Modeling of Mass Flow Behavior of Hot Rolled Low Alloy Steel based on Combined Johnson-Cook and Zerilli-Armstrong Model, X. Wang, K. Chandrashekhara, Seth A. Rummel, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Inverse Finite Element Modeling of the Barreling Effect on Experimental Stress-Strain Curve for High Temperature Steel Compression Test, X. Wang, H. Li, K. Chandrashekhara, Seth A. Rummel, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Distribution of Fission Products Palladium, Silver, Cerium and Cesium in the Un-Corroded Areas of the Locally Corroded Sic Layer of a Neutron Irradiated TRISO Fuel Particle, Haiming Wen and Isabella Johanna Van Rooyen
Finite element modeling of the flexural mechanical response of polymer-coated bioactive glass scaffolds composed of thermally-bonded unidirectional fibers, Wei Xiao, Mohsen Asle Zaeem, D. E. Day, and M. N. Rahaman
Tough and Strong Porous Bioactive Glass-PLA Composites for Structural Bone Repair, Wei Xiao, Mohsen Asle Zaeem, Guangda Li, B. Sonny Bal, and M. N. Rahaman
Design, fabrication and testing of bioactive glass scaffolds for structural bone repair, Wei Xiao, Mohsen Asle Zaeem, M. N. Rahaman, and B. Sonny Bal
Influence Of Phase Separation On Structure-property Relationships In The (GeSe2-3As2Se3)1-xPbSex Glass System, Anupama Yadav, Myungkoo Kang, Charmayne Smith (Lonergan), Jason Lonergan, Andrew Buff, Laura Sisken, Karima Chamma, Cesar Blanco, Joe Caraccio, Theresa Mayer, Clara Rivero-Baleine, and Kathleen Richardson
Fabrication of Functionally Graded Ti and γ-TiAl by Laser Metal Deposition, Lei Yan, Xueyang Chen, Yunlu Zhang, Joseph William Newkirk, and Frank W. Liou
