Submissions from 1993
Active Optimum Control of Orthotropic Plates Using Piezoelectric Stiffeners, Victor Birman and Sarp Adali
Buckling and Post-Buckling of Composite Plates and Shells Subjected to Elevated Temperature, Victor Birman and Charles W. Bert
Approach to Three-Dimensional Analysis of Finite Three-Layered Composite Plates with a Through Crack, Victor Birman and Arvind Nagar
Benchmark Problem Definition and Summary of Computational Results for Mixed Convection Over a Backward Facing Step, B. F. Blackwell and Bassem F. Armaly
Dynamic Modeling Of Piezoelectric Laminated Plates Using Finite Element Method, K. Chandrashekhara and Amit N. Agarwal
Active Vibration Control of Laminated Composite Plates Using Piezoelectric Devices: A Finite Element Approach, K. Chandrashekhara and A. N. Agarwal
Theoretical and Experimental Investigation of Framed Structure-Layered Soil Interaction Problems, K. Chandrashekhara and S. J. Antony
Experimental-Numerical Hybrid Method for Elastic Contact Problems, K. Chandrashekhara, S. J. Antony, and Santanu Manna
Linear and Geometrically Non-Linear Analysis of Composite Beams under Transverse Loading, K. Chandrashekhara and Kiran Madhav Bangera
Vibration of Symmetrically Laminated Clamped-Free Beam with a Mass At the Free End, K. Chandrashekhara and Kiran Madhav Bangera
Active Buckling Control of Smart Composite Plates-Finite-Element Analysis, K. Chandrashekhara and K. Bhatia
Enhancement of Buckling Loads of Laminated Plates Using Piezoelectric Devices, K. Chandrashekhara and K. Bhatia
Static Analysis of a Thick Laminated Circular Cylindrical Shell Subjected to Axisymmetric Load, K. Chandrashekhara and B. S. Kumar
Static Analysis of Thick Laminated Circular Cylindrical Shells, K. Chandrashekhara and B. S. Kumar
Computational Study of Boundary Layer Control for Improving Airfoil Performance, Chang-Ren Chen and S. C. Lee
Inverse Segregation for a Unidirectional Solidification of Aluminum-Copper Alloys, J. H. Chen and Hai-Lung Tsai
Natural Convection on Vertical and Horizontal Plates with Vectored Surface Mass Transfer, T. S. Chen, Wiley P. Buchanan, and Bassem F. Armaly
Effect Of Frictional Force On The Steady State Axisymmetric Deformations Of A Viscoplastic Target, X. Chen and R. C. Batra
Computer Simulation Of Three-dimensional Mechanical Assemblies: Part II - Computer Simulation, T. C. Chou and Frank W. Liou
Thermal Contact Conductance Of A Phase-mixed Coating Layer By Transitional Buffering Interface, K. C. Chung, John W. Sheffield, Harry J. Sauer, T. (Thomas) J. O'Keefe, and A. Williams
Thermal Contact Conductance Of Coated Junctions Within Microelectronic Packages, Kee Chiang Chung, Heather K. Benson, and John W. Sheffield
Plane Motions of Elastic Pseudo-Rigid Bodies: An Example, H. Cohen and G. P. MacSithigh
Two-Dimensional Anisotropic Scattering in a Semi-Infinite Cylindrical Medium Exposed to a Laser Beam, Alfred L. Crosbie and Lawrence Che-Keung Lee
Two-Dimensional Isotropic Scattering in a Semi-Infinite Cylindrical Medium with Refractive Index Greater Than Unity, Alfred L. Crosbie and Sen-Ming Shieh
Neural On-line Learning In Missile Guidance, Jeffrey S. Dalton and S. N. Balakrishnan
Modeling of Solute Redistribution in the Mushy Zone During Solidification of Aluminum-Copper Alloys, Q. Z. Diao and Hai-Lung Tsai
The Formation of Negative- And Positive-Segregated Bands During Solidification of Aluminum-Copper Alloys, Q. Z. Diao and Hai-Lung Tsai
Computer Simulation Of Three-dimensional Mechanical Assemblies: Part I - General Formulation, Yong Fang and Frank W. Liou
Primary and Secondary Vortex Structures Over Accelerated-Decelerated Airfoils At High Angles of Attack, Fathi Finaish and Jacopo Frigerio
Vortex Developments over Steady and Accelerated Airfoils Incorporating a Trailing Edge Jet, Fathi Finaish, N. Okong'o, and J. Frigerio
Analysis and Optimization of Thermal Stratification and Self-Pressurization Effects in Liquid Hydrogen Storage Systems - Part 1: Model Development, S. Gursu, John W. Sheffield, S. A. Sherif, and T. N. Veziroglu
Analysis and Optimization of Thermal Stratification and Self-Pressurization Effects in Liquid Hydrogen Storage Systems - Part 2: Model Results and Conclusions, S. Gursu, John W. Sheffield, S. A. Sherif, and T. N. Veziroglu
Use of an Alternating Gradient Cloud Chamber to Measure the Performance of a Condensation Nucleus Counter, Donald E. Hagen, Chen Kwee Lutrus, Max B. Trueblood, Philip D. Whitefield, Darryl J. Alofs, L. R. Dominguez-Sommer, and J. R. C. Futrell
Laminar Mixed Convection in a Duct with a Backward-Facing Step: The Effects of Inclination Angle and Prandtl Number, B. Hong, Bassem F. Armaly, and T. S. Chen
Mixed Convection in a Laminar, Vertical, Backward-Facing Step Flow, B. Hong, Bassem F. Armaly, and T. S. Chen
Stationkeeping Method for Libration Point Trajectories, K. C. Howell and Henry J. Pernicka
Mixed Convection Along a Nonisothermal Vertical Flat Plate Embedded in a Porous Medium: The Entire Regime, Jen-Chiang Hsieh, T. S. Chen, and Bassem F. Armaly
Nonsimilarity Solutions for Mixed Convection from Vertical Surfaces in Porous Media: Variable Surface Temperature or Heat Flux, Jen-Chiang Hsieh, T. S. Chen, and Bassem F. Armaly
Mapping of Kinematic and Dynamic Parameters for Coupled Manipulators, Zhiming Ji and Ming-Chuan Leu
Development and Implementation of Linear Assignment Algorithm for Assembly of Pcb Components, Zhiming Ji, Ming-Chuan Leu, and Hei Wong
Stress Distribution In An Elastic Perfectly Plastic Plate Subjected To Corrosive Environmental Loads, A. Kadić-Galeb and R. C. Batra
Comparison of Near-Wake Predictions Using Two-Equation µ Model and Reynolds-Stress Model, S. C. Lee and B. Hong
Nonlinear Finite Element Analysis of Pressure Vessel Welds, T. F. Lehnhoff and Gregory Richard Maes
Planning of Component Placement/Insertion Sequence and Feeder Setup in Pcb Assembly Using Genetic Algorithm, Ming-Chuan Leu, H. Wong, and Zhiming Ji
Anti-Windup Control of Second-Order Plants with Saturation Nonlinearity, Ming-Chuan Leu, Sangsik Yang, and Andrew U. Meyer
Development of an Advisory Expert System for Elastic Mechanism Design, Frank W. Liou and Abani Kumar Patra
Experimental Frequency Response Analysis of Flexible Mechanisms, Frank W. Liou and Kwei-Cheng Peng
Eigenvalue-Dependent Series, Dwight C. Look
A Comparison of Classical and Consistent Shear Lag Models for Failure Analysis of Unidirectional Composites, V. G. Mukunda and Lokeswarappa R. Dharani
On Matrix in Edge Notched Unidirectional Composites, V. G. Mukunda and Lokeswarappa R. Dharani
Feasibility Of Determining Haze Properties During High-speed Titan Entry, Harlan F. Nelson
Fin-planform Effects On Lift And Center Of Pressure For Supersonic Missiles, Harlan F. Nelson and M. V. Talpallikar
Finite Element Analysis Of Heat Transfer In Anisotropic Solids: Application To Manufacturing Problems, P. Newnham and Serge Abrate
A Kinematically Intelligent Blackboard for Computer Aided Instruction, J. Keith Nisbett, D. Watkins, and Clark R. Barker
Strategy to Rotate the Mars Observer Orbit Node Line to Advance the Mapping Schedule, Henry J. Pernicka, T. H. Sweetser, and R. B. Roncoli
Comparison of Classical with Robust Control for Smart Structures, Seung-Woo Rhee and Leslie Robert Koval
Comparison Of Classical Control With Robust Control For SMA Smart Structures, S. W. Rhee and Leslie Robert Koval
Laminar Mixed Convection Over Horizontal Flat Plates with Power-Law Variation in Surface Temperature, W. R. Risbeck, T. S. Chen, and Bassem F. Armaly
Significance Of Thermal Contact Resistance On Performance And Size Of Finned Tube Heat Exchangers, Harry J. Sauer, Jr.
Analysis of the Effect of Surface Heating on Boundary Layer Development over an Nu-0215 Airfoil, S. J. Schmid and B. P. Selberg
Some Additional Stability and Performance Characteristics of the Scissor/Pivot Wing Configurations, B. P. Selberg and P. Vitt
A Contact Phase Model for the Analysis of Flexible Mechanisms under Impact Loading, Chin-Wen Shao, Frank W. Liou, and Abani Kumar Patra
Thermal Contact Conductance of a Phase-Mixed Coating Layer by Transitional Buffering Interface, John W. Sheffield, A. Williams, Kee-Chiang Chung, Thomas J. O'Keefe, and Harry J. Sauer Jr.
Finite Element Modeling of Sheared Flow Effects on the Radiation Characteristics of Acoustic Sources in a Circular Duct, James Edward Steck and Walter Eversman
Parallel Implementation of a Recursive Least-Squares Neural Network Training Method on the Intel iPSC/2, James Edward Steck, Bruce M. McMillin, K. Krishnamurthy, and Gary G. Leininger
Modeling and Robust Control of Smart Structures, Chris D. Tebbe, Tim G. Schroeder, Robert K. Butler, Vittal S. Rao, and Leslie Robert Koval
Non-Self-Similar Fiber Fracture in Unidirectional Composites, Wei-Tien Tsai and Lokeswarappa R. Dharani
The Validation and Application of Numerical Modelling to Supersonic Mixing and Reacting Flows, Paul H. Vitt, David W. Riggins, and C. R. McClinton
Cogeneration by Steam Injection to Gas-Turbine Engines, Robert M. Wagner and S. C. Lee
Three Dimensional Induction System Acoustic Modeling with Acoustic Wave Finite Elements, John A. White Jr. and Walter Eversman
Adaptive Genetic Algorithm for Optimal Printed Circuit Board Assembly Planning, Hei Wong and Ming-Chuan Leu
Procase: A Prototype Of Intelligent Case-based Process Planning System With Simulation Environment, Hao Yang and Wen F. Lu
Second Law Analysis of Active Magnetic Regenerative Hydrogen Liquefiers, Lifeng Zhang, S. A. Sherif, T. N. Veziroglu, and John W. Sheffield
Second Law Analysis Of Active Magnetic Regenerative Hydrogen Liquefiers, L. Zhang, S. A. Sherif, T. N. Veziroglu, and John W. Sheffield
Effects of Thermal Residual Stress on a Unidirectional Composite with Damage, Y. Zhao and Lokeswarappa R. Dharani
Fractal Geometry Model for Wear Prediction, G. Y. Zhou, Ming-Chuan Leu, and Denis Blackmore
Analysis Of Dynamic Shear Bands In An FCC Single Crystal, Z. G. Zhu and R. C. Batra
Submissions from 1992
Vibrations Of Belts And Belt Drives, Serge Abrate
Machining Of Composite Materials. Part II: Non-traditional Methods, Serge Abrate and D. Walton
Machining Of Composite Materials. Part I: Traditional Methods, Serge Abrate and D. A. Walton
Measurements of Laminar Mixed Convection Adjacent to a Vertical Plate-Uniform Wall Heat Flux Case, H. I. Abu-Mulaweh, Bassem F. Armaly, and T. S. Chen
Self-tuning Guidance Applied To Aeroassisted Orbit Transfer Problems, S. N. Balakrishnan and Sri Gouri Iiamarsu
Use of Time Varying Dynamics in Neural Network to Solve Multi-Target Classification, S. N. Balakrishnan and J. Rainwater
Analysis Of Shear Bands In Simple Shearing Deformations Of Nonpolar And Dipolar Viscoplastic Materials, R. C. Batra
Steady-state Penetration Of Transversely Isotropic Rigid/perfectly Plastic Targets, R. C. Batra and A. Adam
Effect Of Constitutive Models On Steady State Axisymmetric Deformations Of Thermoelastic-viscoplastic Targets, R. C. Batra and R. Jayachandran
Analysis Of Shear Banding In Twelve Materials, R. C. Batra and Chang-Soo Kim
An Adaptive Mesh Refinement Technique For The Analysis Of Shear Bands In Plane Strain Compression Of A Thermoviscoplastic Solid, R. C. Batra and K. I. Ko
Dynamic Stability of Composite-Material Circular Cylindrical Shells with Orthogonal Stiffeners, Charles W. Bert, Chun-Do Kim, and Victor Birman
Three-Dimensional Elasticity Solution for Static Response of Simply Supported Orthotropic Cylindrical Shells, A. Bhimaraddi and K. Chandrashekhara
Dynamic and Static Pseudo-Axisymmetric Thermal Problems of Generally Laminated Cylindrical Shells, Victor Birman
Exact Solution of Axisymmetric Problems of Laminated Cylindrical Shells with Arbitrary Boundary Conditions - Higher-Order Theory, Victor Birman
Extension Of Vlasov’s Semi-membrane Theory To Reinforced Composite Shells, Victor Birman
Theory of Geometrically Nonlinear Composite Plates with Piezoelectric Stiffeners, Victor Birman
Crack Arrester Layers Technique in Composite Plates, Victor Birman and Arvind Nagar
Analysis of Swept Volume Via Lie Groups and Differential Equations, Denis Blackmore and Ming-Chuan Leu
Application of Flows and Envelopes to Nc Machining, Denis Blackmore, Ming-Chuan Leu, and K. K. Wang
Classification and Analysis of Robot Swept Volumes, Denis Blackmore, Ming-Chuan Leu, and W. Wang
Body-fin Aerodynamic Interference For Low Aspect Ratio Missiles, Brent W. Bossi and Harlan F. Nelson
Effect Of Temperature On The Ultimate Strength And Modulus Of Whisker‐Reinforced Ceramics, Douglas R. Carroll and Lokeswarappa R. Dharani
