Submissions from 2002
Object-Oriented Modeling and Fault Detection of a Powder Feeder for a Laser Metal Deposition System, Robert G. Landers, Michael Gene Hilgers, Frank W. Liou, and Bruce M. McMillin
Object-Oriented Modeling and Fauly Detection of a Powder Feeder for a Laser Metal Deposition System, Robert G. Landers, Michael Gene Hilgers, Frank W. Liou, and Bruce M. McMillin
Laminar Mixed Convection Adjacent to Three-Dimensional Backward-Facing Step, An Li and Bassem F. Armaly
Three-Dimensional Forced Convection Flow Adjacent to Backward-Facing Step, An Li, Bassem F. Armaly, and J. H. Nie
Machining Process Monitoring and Control: The State-of-the-art, Steven Y. Liang, Rogelio L. Hecker, and Robert G. Landers
Machining Process Monitoring and Control: The State-of-the-art, Steven Y. Liang, Rogelio L. Hecker, and Robert G. Landers
Future Directions in Machining Sensing and Control: Introduction, S. Y. Liang and Robert G. Landers
Product Development Curriculum with Integrated Manufacturing Processes, Frank W. Liou, Venkat Allada, Ming-Chuan Leu, Rajiv S. Mishra, Anthony Chukwujekwu Okafor, and Ashok Agrawal
A Product Focused Manufacturing Curriculum, Frank W. Liou, Rajiv S. Mishra, Ashok Agrawal, Venkat Allada, Ming-Chuan Leu, and Anthony Chukwujekwu Okafor
Accuracy and Efficiency in FEM Modeling of Turbofan Acoustic Radiation, Eivind Listerud and Walter Eversman
Investigation of Part Accuracy and Surface Roughness in Rapid Freeze Prototyping Based Investment Casting, Qingbin Liu, Ming-Chuan Leu, and Stephen M. Schmitt
Experimental Study on the Ice Pattern Fabrication for the Investment Casting by Rapid Freeze Prototyping (RFP), Qingbin Liu, Guanghua Sui, and Ming-Chuan Leu
Towards Failure Modeling in Complex Dynamic Systems: Impact of Design and Manufacturing Variations, Daniel A. McAdams and Irem Y. Tumer
Towards Failure Modeling in Complex Dynamic Systems: Impact of Design and Manufacturing Variations, Daniel A. McAdams and Irem Y. Tumer
A Quantitative Similarity Metric for Design-by-analogy, Daniel A. McAdams and Kristin L. Wood
Three-Dimensional Radiative Transfer in an Anisotropically Scattering, Plane-Parallel Medium, Donald W. Mueller Jr. and Alfred L. Crosbie
Three-Dimensional Radiative Transfer in an Anisotropically Scattering, Semi-Infinite Medium, Donald W. Mueller Jr. and Alfred L. Crosbie
Three-Dimensional Vector Radiative Transfer in a Semi-Infinite Rayleigh Scattering Medium Exposed to a Polarized Laser Beam, Donald W. Mueller Jr. and Alfred L. Crosbie
Three-Dimensional Vector Radiative Transfer in a Semi-Infinite, Rayleigh Scattering Medium Exposed to Spatially Varying Polarized Radiation, Donald W. Mueller Jr. and Alfred L. Crosbie
Formulation of High-temperature Properties for Moist Air, Harlan F. Nelson and Harry J. Sauer
Three-Dimensional Convective Flow Adjacent to Backward-Facing Step, J. H. Nie and Bassem F. Armaly
Proper Orthogonal Decomposition Based Feedback Optimal Control Synthesis of Distributed Parameter Systems Using Neural Networks, Radhakant Padhi and S. N. Balakrishnan
Proper Orthogonal Decomposition based Optimal Control Design of Heat Equation with Discrete Actuators using Neural Networks, Radhakant Padhi and S. N. Balakrishnan
Experimental Implementation of Adaptive-Critic Based Infinite Time Optimal Neurocontrol for a Heat Diffusion System, Prashant Prabhat, S. N. Balakrishnan, and Dwight C. Look
Deriving Function-failure Similarity Information for Failure-free Rotorcraft Component Design, Rory A. Roberts, Robert B. Stone, and Irem Y. Tumer
Deriving Function-failure Similarity Information for Failure-free Rotorcraft Component Design, Rory A. Roberts, Robert B. Stone, and Irem Y. Tumer
Matrix Cracking and Delaminations in Orthotropic Laminates Subjected to Freeze-Thaw: Model Development, S. Roy, G. H. Nie, Ravi Shankar Karedla, and Lokeswarappa R. Dharani
Stress Intensity Factor for an Elliptic Inclusion in Orthotropic Laminates Subjected to Freeze-Thaw: Model Verification, S. Roy, G. H. Nie, Ravi Shankar Karedla, and Lokeswarappa R. Dharani
Automatic Process Planning of a Multi-Axis Hybrid Manufacturing System, Jianzhong Ruan, Jun Zhang, Kunnayut Eiamsa-ard, and Frank W. Liou
Energy Conservation Using The Closed Water Loop Heat Pump, Harry J. Sauer and Guruprasad Rao
Effects of Missile Size and Glass Type on Impact Resistance of “Sacrificial Ply” Laminated Glass, T. J. Saxe, Richard A. Behr, Joseph E. Minor, Paul A. Kremer, and Lokeswarappa R. Dharani
Neural Network Based Constitutive Model for Rubber, Yuelin Shen, Guiyong Song, and K. Chandrashekhara
Accessory Serpentine Belt Stress Analysis Using Hyperelastic Model, Yuelin Shen, Guiyong Song, K. Chandrashekhara, William F. Breig, and Larry R. Oliver
Finite Element Analysis of Frp Tube Assemblies for Bridge Decks, Yuelin Shen, M. Xu, K. Chandrashekhara, and Antonio Nanni
Striking a Balance: Bringing Engineering Disciplines Together for a Senior Design Sequence, Robert B. Stone and Nancy Hubing
A Computational Approach to Conceptual Design, Zeke Strawbridge, Daniel A. McAdams, and Robert B. Stone
Setting Target Product Requirements: Decision Analytic Approach, Shun Takai and K. Ishii
Towards Failure-free Design: Reducing Dimensionality in Function-failure Similarity Analysis for Large Databases, Irem Y. Tumer, Robert B. Stone, and Rory A. Roberts
Creating Freeform Model by Carving Virtual Workpiece with Haptic Interface, Aditya Velivelli, Xiaobo Peng, and Ming-Chuan Leu
Laser Aided Part Repair -- A Review, Jinglei Wang, Sashikanth Prakash, Yashodhan Joshi, and Frank W. Liou
Modeling Heat and Mass Transfer and Fluid Flow in Three-Dimensional Gas Metal Arc Welding, Y. Wang, Hai-Lung Tsai, S. P. Marin, and P.-C. Wang
Interdisciplinary Graduate Experience: Lessons Learned, Steve Eugene Watkins, V. M. Eller, Josh Corra, M. J. Molander, Bethany Konz, Richard H. Hall, K. Chandrashekhara, and Abdeldjelil Belarbi
Modal Analysis Using Fiber Optic Sensors and Neural Networks for Prediction of Composite Beam Delamination, Steve Eugene Watkins, Gilbert W. Sanders, Farhad Akhavan, and K. Chandrashekhara
A New Filtering Technique for a Class of Nonlinear Systems, Ming Xin and S. N. Balakrishnan
A New Method for Suboptimal Control of a Class of Nonlinear Systems, Ming Xin and S. N. Balakrishnan
A New Optimal Nonlinear Control Method and its Application to Missile Guidance Law Design, Ming Xin and S. N. Balakrishnan
State Dependent Riccati Equation based Spacecraft Attitude Control, Ming Xin and S. N. Balakrishnan
Motion Based Event Recognition Using HMM, Gu Xu, Yu-Fei Ma, Hong-Jiang Zhang, and Shiqiang Yang
An Experimental Investigation of Soot Formation During Nonpremixed Turbulent Combustion of Hydrocarbon Fuels, Bo Yang and Ümit Özgür Köylü
Crystal Structure, Magnetic Properties and Electronic Structure of the MnBi Intermetallic Compound, Jinbo Yang, William B. Yelon, William Joseph James, Qingsheng Cai, M. Kornecki, Samit Roy, Naushad Ali, and Ph. I'Héritier
Structure and Magnetic Properties of the MnBi Low Temperature Phase, Jinbo Yang, William B. Yelon, William Joseph James, Qingsheng Cai, Samit Roy, and Naushad Ali
Electrical Properties of SrBi₂Ta₂O₉ Ferroelectric Thin Films at Low Temperature, Pingxiong Yang, David L. Carroll, John Ballato, and Robert W. Schwartz
Optical Limiting in SrBi₂Ta₂O₉ and PbZrxTi₁₋ₓO₃ Thin Films, Pingxiong Yang, Jianfeng Xu, Robert W. Schwartz, David L. Carroll, and John Ballato
Strength and Modulus Degradation of Carbon Fiber-reinforced Polymer Laminates from Fiber Misalignment, Xinbao Yang, Antonio Nanni, Stephen B. Haug, and Chung Leung Sun
Motion Planning for Dynamic Systems Using First-Order Logic, Lei Yan and K. Krishnamurthy
Freeform Object Design and Simultaneous Manufacturing, Wei Zhang, Weihan Zhang, Heng Lin, and Ming-Chuan Leu
Pore Formation and Prevention in Deep Penetration Pulsed Laser Welding, W. H. Zhang and Hai-Lung Tsai
Numerical Modeling of Keyhole Dynamics in Laser Welding, W.-H. Zhang, J. Zhou, and Hai-Lung Tsai
Inertia Effects on Non-Parallel Thermal Instability of Natural Convection Flow Over Horizontal and Inclined Plates in Porous Media, J. Z. Zhao and T. S. Chen
Submissions from 2001
World Wide Web Resources for Materials Science, Serge Abrate
Turbulent Mixed Convection Flow Over a Backward-Facing Step, H. I. Abu-Mulaweh, T. S. Chen, and Bassem F. Armaly
Structural Health Monitoring Using Wavelet Transforms, Venkata Kasi Viswanath Amaravadi, Vittal S. Rao, Leslie Robert Koval, and Mark M. Derriso
Robust State Dependent Riccati Equation Based Guidance Laws, S. N. Balakrishnan and Ming Xin
A Numerical Study of Automotive Gas Tank Filler Pipe Two Phase Flow, R. Banerjee, Kakkattukuzhy M. Isaac, L. Oliver, and W. Breig
Use of Membrane Collectors in Electrostatic Precipitators, David J. Bayless, Hajrudin Pasic, M. Khairul Alam, Liming Shi, Brian Haynes, Joe Cochran, and Wajahat Khan
Smart Fiber-Reinforced Polymer Rods Featuring Improved Ductility and Health Monitoring Capabilities, Abdeldjelil Belarbi, Steve Eugene Watkins, K. Chandrashekhara, Josh Corra, and Bethany Konz
Transverse Matrix Cracking in a Sandwich Beam with Cross-Ply Facings Subject to a Uniform Pressure, Victor Birman
Matrix Cracking in Transverse Layers of Cross-Ply Beams Subjected to Bending and Its Effect on Vibration Frequencies, Victor Birman and Larry W. Byrd
Natural Frequencies of Cross-Ply Laminated Panels with Matrix Cracks, Victor Birman and Larry W. Byrd
On the Prediction of Damping in Composite and Sandwich Structures, Victor Birman and Larry W. Byrd
Selected Issues of Mechanics of Ceramic Matrix Composites, Victor Birman and Larry W. Byrd
Vibrations of Sandwich Panels and Beams with Matrix Cracks in the Facing, Victor Birman and George J. Simitses
Control of Laser Cladding for Rapid Prototyping -- A Review, Mallikharjuna R. Boddu, Robert G. Landers, and Frank W. Liou
Empirical Modeling and Vision Based Control for Laser Aided Metal Deposition Process, Mallikharjuna R. Boddu, Srinivas Musti, Robert G. Landers, Sanjeev Agarwal, and Frank W. Liou
Numerical Characterization of the Morphology of Aggregated Particles, A. M. Brasil, Tiago L. Farias, Maria da Gracia Carvalho, and Ümit Özgür Köylü
Structural Properties of Recycled Plastic/Sawdust Lumber Decking Planks, Douglas R. Carroll, Robert B. Stone, Anthony M. Sirignano, Rosanna M. Saindon, Stephen C. Gose, and Marc A. Friedman
Fatigue Assessment of Traffic Signal Mast Arms based on Field Test Data under Natural Wind Gusts, Genda Chen, Jingning Wu, Jiaqing Yu, Lokeswarappa R. Dharani, and Michael G. Barker
Comparison of Methods for Calculating Turbine Work in the Air Turborocket, Kirk Christensen
Orbit Determination At a Single Ground Station Using Range Rate Data, D. Coyle and Henry J. Pernicka
Detection and Classification of Impact-Induced Damage in Composite Plates using Neural Networks, Rohit Dua, Steve Eugene Watkins, Donald C. Wunsch, K. Chandrashekhara, and Farhad Akhavan
Skeleton-Based Geometric Reasoning for Adaptive Slicing in a Five-Axis Laser Aided Manufacturing Process System, Kunnayut Eiamsa-ard, Jun Zhang, and Frank W. Liou
An Approach for Development of Damage-Free Drilling of Carbon Fiber Reinforced Thermosets, E. Ugo Enemuoh, A. Sherif El-Gizawy, and Anthony Chukwujekwu Okafor
Nonlinear Flight Control System with Neural Networks, Sergio Esteban and S. N. Balakrishnan
A Reverse Flow Theorem and Acoustic Reciprocity in Compressible Potential Flows in Ducts, Walter Eversman
Numerical Experiments on Acoustic Reciprocity in Compressible Potential Flows in Ducts, Walter Eversman
The Boundary Condition At an Impedance Wall in a Non-Uniform Duct with Potential Mean Flow, Walter Eversman
A High Efficiency All Glass Sampling and Concentration Device for Adsorptive Semivolatile Organics, Mark Gehrke, Shubhender Kapila, Paul Ki-souk Nam, and V. J. Flanigan
Micromechanics Modeling of Long-Term Interlaminar Properties of Woven Fabric Polymer Composites, V. Gupta, Samit Roy, and Lokeswarappa R. Dharani
Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture, V. Gupta, Samit Roy, and Lokeswarappa R. Dharani
Optical Investigation of InGaAsN Structures for Photodetector Applications, J. B. Heroux, Xiaodong Yang, B. Turk, and W. I. Wang
Evolving a Functional Basis for Engineering Design, Julie M. Hirtz, Robert B. Stone, Daniel A. McAdams, Simon Szykman, and Kristin L. Wood
Approximate Analytical Solutions for the Transient Temperature Profiles in Stratified Liquid Sensible Storage, Kelly Homan
Second Law Aspects of Simplified Models for Sensible Thermal Storage, Kelly Homan
Thermodynamic Optimization of Electric Water Heating with Fully-Mixed Storage: First Law Efficiency, Kelly Homan
Unsteady Skin-Friction Measurements on a Maneuvering, Serhat Hosder and R. L. Simpson
Unsteady Turbulent Skin Friction and Separation Location Measurements on a Maneuvering Undersea Vehicle, Serhat Hosder and R. L. Simpson
Polynomial Response Surface Approximations for the Multidisciplinary Design Optimization of a High Speed Civil Transport, Serhat Hosder, Layne T. Watson, Bernard Grossman, William H. Mason, Hongman Kim, Raphael T. Haftka, and Steven E. Cox
Robust Adaptive Critic based Neurocontrollers for Missiles with Model Uncertainties, Zhongwu Huang and S. N. Balakrishnan
Design for Robustness of Modular Product Families for Current and Future Markets, Lan Jiang and Venkat Allada
Robust Modular Product Family Design, Lan Jiang and Venkat Allada
