Submissions from 1992
Measurements of Laminar Mixed Convection Adjacent to a Vertical Plate-Uniform Wall Heat Flux Case, H. I. Abu-Mulaweh, Bassem F. Armaly, and T. S. Chen
Self-tuning Guidance Applied To Aeroassisted Orbit Transfer Problems, S. N. Balakrishnan and Sri Gouri Iiamarsu
Use of Time Varying Dynamics in Neural Network to Solve Multi-Target Classification, S. N. Balakrishnan and J. Rainwater
Analysis Of Shear Bands In Simple Shearing Deformations Of Nonpolar And Dipolar Viscoplastic Materials, R. C. Batra
Steady-state Penetration Of Transversely Isotropic Rigid/perfectly Plastic Targets, R. C. Batra and A. Adam
Effect Of Constitutive Models On Steady State Axisymmetric Deformations Of Thermoelastic-viscoplastic Targets, R. C. Batra and R. Jayachandran
Analysis Of Shear Banding In Twelve Materials, R. C. Batra and Chang-Soo Kim
An Adaptive Mesh Refinement Technique For The Analysis Of Shear Bands In Plane Strain Compression Of A Thermoviscoplastic Solid, R. C. Batra and K. I. Ko
Dynamic Stability of Composite-Material Circular Cylindrical Shells with Orthogonal Stiffeners, Charles W. Bert, Chun-Do Kim, and Victor Birman
Three-Dimensional Elasticity Solution for Static Response of Simply Supported Orthotropic Cylindrical Shells, A. Bhimaraddi and K. Chandrashekhara
Dynamic and Static Pseudo-Axisymmetric Thermal Problems of Generally Laminated Cylindrical Shells, Victor Birman
Exact Solution of Axisymmetric Problems of Laminated Cylindrical Shells with Arbitrary Boundary Conditions - Higher-Order Theory, Victor Birman
Extension Of Vlasov’s Semi-membrane Theory To Reinforced Composite Shells, Victor Birman
Theory of Geometrically Nonlinear Composite Plates with Piezoelectric Stiffeners, Victor Birman
Crack Arrester Layers Technique in Composite Plates, Victor Birman and Arvind Nagar
Analysis of Swept Volume Via Lie Groups and Differential Equations, Denis Blackmore and Ming-Chuan Leu
Application of Flows and Envelopes to Nc Machining, Denis Blackmore, Ming-Chuan Leu, and K. K. Wang
Classification and Analysis of Robot Swept Volumes, Denis Blackmore, Ming-Chuan Leu, and W. Wang
Body-fin Aerodynamic Interference For Low Aspect Ratio Missiles, Brent W. Bossi and Harlan F. Nelson
Effect Of Temperature On The Ultimate Strength And Modulus Of Whisker‐Reinforced Ceramics, Douglas R. Carroll and Lokeswarappa R. Dharani
The Strength And Modulus Of Imperfectly Bonded Whisker Reinforced Ceramic Matrix Composites, Douglas R. Carroll and Lokeswarappa R. Dharani
Thermal Buckling of Laminated Plates Using a Shear Flexible Finite Element, K. Chandrashekhara
Free Vibration of Composite Beams Using a Refined Shear Flexible Beam Element, K. Chandrashekhara and Kiran Madhav Bangera
Bending Analysis of a Truncated Conical Shell Subjected to Asymmetric Load, K. Chandrashekhara and M. S. Karekar
Photoelastic Approach to Framed Structure-Foundation Beam-Soil Interaction, K. Chandrashekhara and K. R. Murugappan
Interaction Between Shrinkage-induced Fluid Flow And Natural Convection During Alloy Solidification, K. C. Chiang and Hai-Lung Tsai
Shrinkage-Induced Fluid Flow and Domain Change in Two-Dimensional Alloy Solidification, K. C. Chiang and Hai-Lung Tsai
Symmetric And Asymmetric Roto-deformations Of A Symmetrical, Isotropic, Elastic Pseudo-rigid Body, H. Cohen and G. (Gearoid) P. MacSithigh
Shake Reduction in an Automobile Engine by Means of Crankshaft-Mounted Pendulums, Don Cronin
Single and Double Scattering Approximations for a Two-Dimensional Cylindrical Medium with Anisotropic Scattering, Alfred L. Crosbie and Lawrence Che-Keung Lee
Bundle-Debond Technique for Characterization of Moisturized Kevlar/Phenolic Interfaces, Lokeswarappa R. Dharani, P. Gopal, and Frank D. Blum
Effects of Non-Homogeneous Compaction on Densification of Ceramic Matrix Composites, Lokeswarappa R. Dharani and Wei Hong
Effect of Specimen Width on the Fracture of Unidirectional Metal Matrix Composites, Lokeswarappa R. Dharani, S. Venkatakrishnaiah, and R. A. Dupuy
Micromechanical Modeling Of Failure In Fiber Reinforced Intermetallic Matrix Composites, Lokeswarappa R. Dharani, Y. L. Zhao, and L. Chai
Aerodynamic Forces On Noncircular Cross-section Missile Forebodies, Brian E. Est and Harlan F. Nelson
Numerical Experiments for Engineering Students: An Approach to Enhance Teaching and Learning Processes, Fathi Finaish
A Simplified Dynamic Model of the Effect of Internal Damping on the Rolling Resistance in Pneumatic Tires, J. R. Friend, J. Satonobu, K. Nakamura, S. Ueha, and Daniel S. Stutts
A Complete Model Characterization of Brushless DC Motors, N. Hemati and Ming-Chuan Leu
Methodology for Compliant Mechanisms Design: Part II - Shooting Method and Application, I. Her, Ashok Midha, and B. A. Salamon
Electrostatic Precipitation as a Means of Reducing Diesel Particulate Emissions, Kelly Homan
Mixed Convection in a Vertical Duct with a Backward-Facing Step, B. Hong, Bassem F. Armaly, and T. S. Chen
A Computational Study Of Gas Turbine Combustion Chamber Flow Field, Kakkattukuzhy M. Isaac
Computation of Turbulent Flow About Cone-Derived Waverider, Kakkattukuzhy M. Isaac, John B. Miles, and Bor-Jang Tsai
Steady State Axisymmetric Deformations Of A Thick Elastic-thermoviscoplastic Target, R. Jayachandran and R. C. Batra
Steady State Penetration Of Elastic Perfectly Plastic Targets, R. Jayachandran and R. C. Batra
Vision Based Tool Calibration and Accuracy Improvement for Assembly Robots, Zhiming Ji, Ming-Chuan Leu, and P. F. Lilienthal
Application of Linear Assignment Model for Planning of Robotic Printed Circuit Board Assembly, Zhiming Ji, Ming-Chuan Leu, and Hei Wong
Characterization of Interfacial Bond Strength by Dynamic Analysis, J. M. Kennedy, Dan Dale Edie, Arindam Banerjee, and R. J. Cano
Effect Of Initial Temperature On The Initiation And Growth Of Shear Bands In A Plain Carbon Steel, Chang-Soo Kim and R. C. Batra
Emission, Structure and Optical Properties of Overfire Soot from Buoyant Turbulent Diffusion Flames, Ümit Özgür Köylü
Structure of Overfire Soot in Buoyant Turbulent Diffusion Flames At Long Residence Times, Ümit Özgür Köylü and G. M. Faeth
Active Vibration Control during Deployment of Space Structures, K. Krishnamurthy and M. C. Chao
Analytical Solutions to Vibration of Generally Layered Composite Beams, S. Krishnaswamy, K. Chandrashekhara, and W. Z. B. Wu
Nonparallel Thermal Instability of Mixed Convection Flow on Nonisothermal Horizontal and Inclined Flat Plates, Hsien-Ren Lee, T. S. Chen, and Bassem F. Armaly
Non-Parallel Thermal Instability of Natural Convection Flow on Non-Isothermal Inclined Flat Plates, Hsien-Ren Lee, T. S. Chen, and Bassem F. Armaly
Reduced Finite Element Model for Nonlinear Analysis of Pressure Vessel Welds, T. F. Lehnhoff and Gregory Richard Maes
Member Stiffness and Bolt Spacing of Bolted Joints, T. F. Lehnhoff, M. L. McKay, and V. A. Bellora
Genericity and Singularities of Robot Manipulators, Ming-Chuan Leu and D. K. Pai
Genetic Algorithm for Solving Printed Circuit Board Assembly Planning Problems, Ming-Chuan Leu, Hermean Wong, and Zhiming Ji
Nonlinear Vibration of a Robot Manipulator with Compliant Joints, Ming-Chuan Leu and Wenjuan H. Zhu
Navier-Stokes Simulation for Cone-Derived Waverider, Jiun-Rong Liao, Kakkattukuzhy M. Isaac, John B. Miles, and Bor-Jang Tsai
Optimal Design of Flexible Mechanisms Using a Parametric Approach, Frank W. Liou and Jyh-Dong Liu
An Efficient Design Approach for Flexible Mechanisms, Frank W. Liou and Chie-Jung Lou
The Development of a Feature-Based Fixture Process Planning System for Flexible Assembly, Frank W. Liou and Dong-Jung Suen
Experimental Demonstration of the Effects of Scattering on a Linearly Polarized Laser Beam by Spherical Particles, Dwight C. Look and Y. R. Chen
Optimization of a Thermally Non-Symmetric Fin: Preliminary Evaluation, Dwight C. Look and Hyung Suk Kang
Mathematical Elasticity Volume One: Three-Dimensional Elasticity, G. P. MacSithigh
Bifurcation and Stability of an Incompressible Elastic Body under Homogeneous Dead Loads with Symmetry Part I: General Isotropic Materials, G. P. MacSithigh and Yi-Chao Chen
Bifurcation and Stability of an Incompressible Elastic Body under Homogeneous Dead Loads with Symmetry Part II: Mooney-Rivlin Materials, G. P. MacSithigh and Yi-Chao Chen
Methodology for Compliant Mechanisms Design: Part I - Introduction and Large-Deflection Analysis, Ashok Midha, I. Her, and B. A. Salamon
Elastic Slider-Crank Mechanism. a Study of the Intrinsic Configuration-Dependent Modal Properties, Ashok Midha, D. Karam, and B. S. Thompson
On the Nomenclature and Classification of Compliant Mechanisms. the Components of Mechanisms, Ashok Midha, T. W. Norton, and Larry L. Howell
Atomization of Liquid Fuels in Supersonic Flow, Azzedine Missoum, Kakkattukuzhy M. Isaac, and J. A. Drallmeier
Effect Of Friction On Matrix Damage In Unidirectional Composites, V. G. Mukunda and Lokeswarappa R. Dharani
Backward Monte Carlo Modeling For Rocket Plume Base Heating, Harlan F. Nelson
Moving Object Recognition and Guidance of Robots Using Neural Networks, Abhijit Neogy, S. N. Balakrishnan, and Cihan H. Dagli
Dynamic Implementation of Keller's Sketching Rules for Burmester Curves: Aa Approach to Sensitivity Analysis, J. Keith Nisbett and S. K. Gupta
Geometric Generation of the Joint Loci of Spatial Dyads with Axis Joints, J. Keith Nisbett and T. J. Lawley
Use of Halo Orbits to Provide a Communication Link between Earth and Mars, Henry J. Pernicka, D. Henry, and M. Chan
Effect of Fiber Coating and Interfacial Debonding on Crack Growth in Fiber-Reinforced Composites, David Brian Popejoy and Lokeswarappa R. Dharani
Crack Growth At Interfaces in Bimaterial Systems and Composites, David Brian Popejoy, Lokeswarappa R. Dharani, and H. Tang
Adaptive Control of a Manipulator Using Artificial Neural Networks, Luis C. Rabelo and Xavier J. R. Avula
Flow Enthalpy Effects On Scramjet Mixing And Combustion, David W. Riggins, C. R. McClinton, and R. C. Rogers
Modeling of Supersonic Combustor Flows Using Parallel Computing, David W. Riggins, M. Underwood, Bruce M. McMillin, L. Reeves, and Lu E. Jui-Lin
Analysis of the Effect of Heat Strips on Boundary Layer Development Over a Flat Plate, S. J. Schmid and B. P. Selberg
Thermal Constriction Resistance of Phase-Mixed Metallic Coatings, John W. Sheffield, Kee-Chiang Chung, and Harry J. Sauer Jr.
Neural Modeling and Control of a Distillation Column, James Edward Steck, K. Krishnamurthy, Bruce M. McMillin, and Gary G. Leininger
Automated Welding Process Fixture Planning Using Features, Richard J. Straus and Frank W. Liou
Hydration Behavior of Laser Dye Aerosols of Mixed Composition Having High Critical Supersaturations, Max B. Trueblood, Donald E. Hagen, and Darryl J. Alofs
Hydration Behavior of Laser Dye Aerosols of Mixed Composition Having High Critical Supersaturations, Max B. Trueblood, Donald E. Hagen, and Darryl J. Alofs
Measurement of the chemical composition of cloud condensation nuclei, Allen L. Williams, Kent E. McClure, Darryl J. Alofs, Donald E. Hagen, John L. Schmitt, Daniel R. White, A. R. Hopkins, and Max B. Trueblood
Determining the chemical composition of cloud condensation nuclei, Allen L. Williams, Jane E. Rothert, Kent E. McClure, Darryl J. Alofs, Donald E. Hagen, Daniel R. White, A. R. Hopkins, and Max B. Trueblood
Knowledge Based System for Intelligent Process Planning, Jin Yu, Frank W. Liou, Zhongfang Tong, and Yueming Sun
Investigation of Topography of Waterjet Generated Surfaces, G. Zhou, Ming-Chuan Leu, E. Geskin, Y. Chung, and J. Chao
Consideration Of Phase Transformations In The Study Of Shear Bands In A Dynamically Loaded Steel Block, Z. G. Zhu and R. C. Batra
Submissions from 1991
Impact On Laminated Composite Materials, Serge Abrate
Matrix Cracking In Laminated Composites: A Review, Serge Abrate
Evaluation Of D-amino Acid Levels In Human Urine And In Commercial L-amino Acid Samples, Daniel W. Armstrong, J. D. Duncan, and S. C. Lee
Hierarchical Neurocontroller Architecture for Intelligent Robotic Manipulation, Xavier J. R. Avula and Luis C. Rabelo
Decoupled Dynamics for Control and Estimation, S. N. Balakrishnan
