Submissions from 2007
Secondary Phase-Separation of Lead Borate Glass under Different Gravity Conditions, Dongmei Zhu, Fa Luo, Wancheng Zhou, C. S. Ray, and D. E. Day
Study on the Decomposition of the Crystalline Phase Na₂O · 8TeO₂, Dongmei Zhu, Fa Luo, Wancheng Zhou, C. S. Ray, and D. E. Day
Phase-separation of Lead Borate Glasses under Different Gravity Conditions, Dongmei Zhu, C. S. Ray, Fa Luo, Wan-cheng Zhou, and D. E. Day
Preparation of Fluorescent Glasses with Variable Compositions, Dongmei Zhu, Wan-cheng Zhou, D. E. Day, and C. S. Ray
Method for Estimating the Critical Cooling Rate for Glass Formation from Isothermal TTT Data, Dongmei Zhu, Wan-cheng Zhou, C. S. Ray, and D. E. Day
Pressureless Sintering of Zirconium Diboride using Boron Carbide and Carbon Additions, Sumin Zhu, William Fahrenholtz, Greg Hilmas, and Shi C. Zhang
Influence of Silicon Carbide Particle Size on the Microstructure and Mechanical Properties of Zirconium Diboride-silicon Carbide Ceramics, Sumin Zhu, Greg Hilmas, and William Fahrenholtz
Pressureless Densification of Zirconium Diboride with Carbon Additions, Sumin Zhu, Greg Hilmas, Shi C. Zhang, and William Fahrenholtz
Pressureless Sintering of Carbon-coated Zirconium Diboride Powders, Sumin Zhu, Greg Hilmas, Shi C. Zhang, and William Fahrenholtz
Submissions from 2006
Structure of Binary Neodymium Borate Glasses by Infrared Spectroscopy, M. Affatigato, Richard K. Brow, A. E. Burns, D. W. Winslow, W. J. Clarida, and S. A. Feller
Normalisation and Sample Composition Analysis of Binary Rare Earth Phosphate Glasses by High Energy X-ray Scattering, Mehdi Ali, G. K. Marasinghe, Robert Hart, Chris Benmore, N. P. Wyckoff, and Richard K. Brow
Method for Fabricating Nanostructured Solid Oxide Fuel Cells and Cell Components, Harlan U. Anderson, X.-D. Zhou, and Wayne Huebner
Global Buckling Investigation in Welding of a Thin Wall Aluminum T Joint, Mohsen Asle Zaeem, Mohammad Rahim Nami, and Mohammad Hassan Kadivar
Investigation of Global Buckling Distortion in Welding of a Thin Wall Aluminum T Joint, Mohsen Asle Zaeem, Mohammad Rahim Nami, Iraj Rajabi, and Mohammad Hassan Kadivar
The Reliability of Modern Alumina Bearings in Total Hip Arthroplasty, B. Sonny Bal, M. N. Rahaman, and Jonathan P. Garino
Ceramic Materials in Total Joint Arthroplasty, B. Sonny Bal, Michael D. Ries, M. N. Rahaman, and Jonathan P. Garino
Evaluation of Mechanical Properties and Microstructure for Laser Deposition Process and Welding Process, Yaxin Bao, Jianzhong Ruan, Todd E. Sparks, Jambunathan Anand, Joseph William Newkirk, and Frank W. Liou
Aluminoborate and Aluminoborosilicate Glasses with High Chemical Durability and the Effect of P₂O₅ Additions on the Properties, Murat Bengisu, Richard K. Brow, Signo Tadeu Dos Reis, E. Yilmaz, and Andrea Moguš-Milanković
Distributed Cable Sensors for Structural Damage Detection: Implementation Issues, Michael A. Brower, Zachary Royer, Genda Chen, David C. Van Aken, and David Pommerenke
Structure of GeO₂-P2₂O₅ Glasses Studied by X-ray and Neutron Diffraction, Richard K. Brow, P. Jóvári, Brad C. Tischendorf, A. C. Hannon, and Uwe Hoppe
Low-temperature Densification of Zirconium Diboride Ceramics by Reactive Hot Pressing, Adam L. Chamberlain, William Fahrenholtz, and Greg Hilmas
Low Temperature Hot Pressing of Zirconium Diboride Ceramics by Reactive Hot Pressing, Adam L. Chamberlain, Greg Hilmas, and William Fahrenholtz
Pressureless Sintering of Zirconium Diboride, Adam L. Chamberlain, Greg Hilmas, and William Fahrenholtz
Electrical Breakdown Strength of Alumina Single Crystal and Ceramics, Sheng Chao, Vladimir Petrovsky, and Fatih Dogan
Direct Synthesis of Thermally Responsive DMA/NIPAM Diblock and DMA/NIPAM/DMA Triblock Copolymers Via Aqueous, Room Temperature RAFT Polymerization, Anthony J. Convertine, Brad S. Lokitz, Yuliya Vasileva, Leslie J. Myrick, Charles W. Scales, Andrew B. Lowe, and Charles L. McCormick
Humidification Factors from Laboratory Studies of Fresh Smoke from Biomass Fuels, D. E. Day, J. L. Hand, C. M. Carrico, Guenter Engling, and W. C. Malm
Minimization of Field Enhancement in Multilayer Capacitors, Bradley J. Deken, Steven V. Pekarek, and Fatih Dogan
Solid-oxide Fuel Cells Operating with Direct-alcohol and Hydrocarbon Fuels, Fatih Dogan
Ceramic Transactions: Preface, Fatih Dogan and Prashant N. Kumta
A New Useful and Renewable Tie-over Dressing Method Using Package Bands and Bra Hooks, Fatih Dogan, Irfan Özyazga, and Teoman Eskitaşçıoğlu
Development of a Spontaneous Immersion Process for Deposition of Cerium Oxide Coatings on Copper Substrates, Joe Edington, Matthew O'Keefe, and Thomas J. O'Keefe
Comparison of Surface Characteristics and Prediction of Wear Properties between Alumina and Oxinium Fermoral Heads, R. Evans, M. D. Ellingsen, S. K. Khanna, M. N. Rahaman, and B. Sonny Bal
Reactive Processing in Ceramic-based Systems, William Fahrenholtz
Structure-property Relations in Monolithic and Fibrous Monolithic ZrB2-based Ceramics, William Fahrenholtz
Effect of Welding Parameters on Properties of 5052 Al Friction Stir Spot Welds, T. A. Freeney, S. R. Sharma, and Rajiv S. Mishra
Freeze-Spray Processing of Layered Ceramic Composites, Qiang Fu, Oratai Jongprateep, Ashlee Abbott, and Fatih Dogan
In Situ Crystallization of Lithium Disilicate Glass, Tihana Fuss, C. S. Ray, C. E. Lesher, and D. E. Day
Millimeter Wave Imaging of Corrosion under Paint: Comparison of Two Probes, Mohammad Tayeb Ahmad Ghasr, Sergey Kharkovsky, R. Zoughi, Matthew O'Keefe, Ajay Padwal, and Donald D. Palmer
Engineering the Advanced Power Grid: Research Challenges and Tasks, C. Gill, Xiaoqing Frank Liu, Bruce M. McMillin, D. Niehaus, Daniel R. Tauritz, and Mariesa Crow
Phase stability, sintering and thermal conductivity of plasma-sprayed ZrO₂-Gd₂O₃ compositions for potential thermal barrier coating applications, Jacob R. Gross, Rollie E. Dutton, Hsin Wang, and M. N. Rahaman
Reaction Chemistry and Microstructure Development of MgO-C Refractories Containing Metal Antioxidants, Jyoti P. Guha and Jeffrey D. Smith
Fusion of Microwave and Eddy Current Data for a Multi-Modal Approach in Evaluating Corrosion under Paint and in Lap Joints, Kapil Gupta, Mohammad Tayeb Ahmad Ghasr, Sergey Kharkovsky, R. Zoughi, R. Joe Stanley, Ajay Padwal, Matthew O'Keefe, Donald D. Palmer, J. Blackshire, Gary Steffes, and N. Wood
Laser-Assisted Synthesis of Diamond-Like Carbon from Cyclohexane Liquid, Y. X. Han, H. Ling, Y. F. Lu, Matthew J. O'Keefe, and T. McKindra
Refractory Selection for High Temperature Black Liquor Gasification, William Lloyd Headrick, William Fahrenholtz, and Alireza Rezaie
Method of Preparing a Solid Oxide Fuel Cell, Greg Hilmas and Dustin Beeaff
Tailoring the Properties of Ceramic-based Composites Using Co-extrusion Processing, Greg Hilmas and Jeremy Lee Watts
Freeze-form Extrusion Fabrication of Ceramic Parts, Tieshu Huang, Michael S. Mason, Greg Hilmas, and Ming-Chuan Leu
Kinetics and Mechanisms of the Conversion of Silicate (45S5), Borate, and Borosilicate Glasses to Hydroxyapatite in Dilute Phosphate Solutions, Wen-Hai Huang, Kanisa Kittiratanapiboon, M. N. Rahaman, and D. E. Day
Mechanisms for Converting Bioactive Silicate, Borate, and Borosilicate Glasses to Hydroxyapatite in Dilute Phosphate Solution, Wen-Hai Huang, Yadong Li, M. N. Rahaman, and D. E. Day
A Study of Accuracy and Reproducibility of High Temperature Differential Scanning Calorimetry, Susan Jacob and Mark E. Schlesinger
Evaluation of the Accuracy and Reproducibility of a High-temperature Differential Scanning Calorimeter by Heat Capacity Measurements, Susan Jacob and Mark E. Schlesinger
Survivability of Single-walled Carbon Nanotubes During Friction Stir Processing, L. B. Johannes, Leonard L. Yowell, Edward Sosa, Sivaram Arepalli, and Rajiv S. Mishra
Characterization of Reactively Sputtered Ti-Si-N Films, Benedict Y. Johnson, Jinghua Sun, and Matthew O'Keefe
Characterization of Alkaline Cleaned and Cerium Oxide Coated Al 2024-T3, Philip S. Jones, Ajay Padwal, Paul Yu, Matthew O'Keefe, Thomas J. O'Keefe, and William Fahrenholtz
Enhancement of Crystal Growth and Superconducting Properties of Melt-Textured YBa₂Cu₃O₇₋ₓ through Addition of BaCeO₃ and BaSnO₃, Oratai Jongprateep and Fatih Dogan
Enhancement of Crystal Growth in Melt Texturing of Ca-doped Y-Ba-Cu-O Superconductors, Oratai Jongprateep and Fatih Dogan
Microstructural Analysis of Plasma Sprayed Al-based Amorphous Alloys: A Comparison with Melt-spinning Technique, Yoshihide Kato, David C. Van Aken, and F. Scott Miller
Modeling of Dielectric Mixtures Containing Conducting Inclusions with Statistically Distributed Aspect Ratio, Marina Koledintseva, Sandeep K. R. Chandra, Richard E. DuBroff, and Robert W. Schwartz
A Maxwell Garnett Model for Dielectric Mixtures Containing Conducting Particles at Optical Frequencies, Marina Koledintseva, Richard E. DuBroff, and Robert W. Schwartz
An Investigation of the Causes that Lead to Burn-In/Burn-On in Heavy Section Steel Castings, Brandon L. Kruse, Von Richards, and P. D. Jackson
Strength of Functionally Designed Cellular Cemented Carbides Produced by Coextrusion, Sean E. Landwehr, Greg Hilmas, and Anthony Griffo
Thermochemistry and Kinetics of Iron Melt Treatment, Semen Naumovich Lekakh, D. G. C. Robertson, and C. R. Loper
Recycling Nonferrous Oxides in Iron and Steel Melting, Semen Naumovich Lekakh, D. G. C. Robertson, Sergey Rimoshevsky, and Vladimir Tribushevsky
Inorganic Crystalline and Amorphous Fibers, Hong Li, Richard K. Brow, Joachim M. Deubener, Jeffrey T. Kohli, and Yuanzheng Yue
Overview of the MIDOS Process for Spontaneous Metal Deposition, Jingye Li, Matthew O'Keefe, and Thomas J. O'Keefe
Electrochemical Cu Nanoparticle Deposition on TaSiN Diffusion Barrier Films, Jingye Li, Shaoxin You, Matthew O'Keefe, and Thomas J. O'Keefe
Spontaneous Electrochemical Deposition of Copper from Organic Solutions on TaSiN, Jingye Li, Shaoxin You, Matthew O'Keefe, and Thomas J. O'Keefe
In Vitro Toxicity of Silica Nanoparticles in Human Lung Cancer Cells, Weisheng Lin, Yue-wern Huang, X.-D. Zhou, and Yinfa Ma
Toxicity of Cerium Oxide Nanoparticles in Human Lung Cancer Cells, Weisheng Lin, Yue-wern Huang, X.-D. Zhou, and Yinfa Ma
Applications of a Hybrid Manufacturing Process for Fabrication and Repair of Metallic Structures, Frank W. Liou, Kevin P. Slattery, Mary Kinsella, Joseph William Newkirk, Hsin-Nan Chou, and Robert G. Landers
Weldability and Microstructure of Nickel-Silicon Based Alloy, Qing-cai Liu, Yi Liu, Jian Yang, Joseph William Newkirk, and Shan-hong Zhang
AC Conductivity Relaxation Processes in CaCu₃Ti₄O₁₂ Ceramics: Grain Boundary and Domain Boundary Effects, Wei Li and Robert W. Schwartz
Responsive Nanoassemblies Via Interpolyelectrolyte Complexation of Amphiphilic Block Copolymer Micelles, Brad S. Lokitz, Anthony J. Convertine, Ryan G. Ezell, Andrew Heidenreich, Yuting Li, and Charles L. McCormick
Oxide-scale and Α-casing Characterization in Ti₆Al₄V Alloy Oxidised in Oxygen Gas, Surender Maddela, S. Bhargava, and M. N. Mungole
Dielectric Properties of Suspensions Containing BaTiO₃ Particles, Abhishek Manohar and Fatih Dogan
Freeform Extrusion of High Solids Loading Ceramic Slurries, Part I: Extrusion Process Modeling, Michael S. Mason, Tieshu Huang, Robert G. Landers, Ming-Chuan Leu, and Greg Hilmas
Freeform Extrusion of High Solids Loading Ceramic Slurries, Part II: Extrusion Process Control, Michael S. Mason, Tieshu Huang, Robert G. Landers, Ming-Chuan Leu, and Greg Hilmas
Effect of Multiple-pass Friction Stir Processing on Microstructure and Tensile Properties of a Cast Aluminum-silicon Alloy, Z. Y. Ma, Siddharth R. Sharma, and Rajiv S. Mishra
Effect of Friction Stir Processing on the Microstructure of Cast A356 Aluminum, Z. Y. Ma, S. R. Sharma, and Rajiv S. Mishra
Microstructural Modification of As-Cast Al-Si-Mg Alloy by Friction Stir Processing, Z. Y. Ma, S. R. Sharma, and Rajiv S. Mishra
Experimental and Numerical Analysis of the Friction Drilling Process, F. Scott Miller, Rui Li, Hsin Wang, and Albert Shih
Friction Drilling of Cast Metals, F. Scott Miller, Jia Tao, and Albert Shih
Single Particle Microelectrodes for Electrochemical Analysis of Sulfide Flotation Processes, Jan D. Miller, Thys Vermaak, and Michael S. Moats
The Mechanics of Biological Materials, Rajiv S. Mishra
Ex Situ XRD, TEM, IR, Raman and NMR Spectroscopy of Crystallization of Lithium Disilicate Glass at High Pressure, Andrea Moguš-Milanković, C. S. Ray, C. E. Lesher, R. Youngman, D. E. Day, and Tihana Fuss
Performance Benchmarking for Laser Weld Repair of Die Components, Joseph William Newkirk, Yaxin Bao, Todd E. Sparks, Jianzhong Ruan, and Frank W. Liou
Furnaceless Sintering of P/M Materials through Friction Stirring, Joseph William Newkirk and Anand Jambunathan
Local Surface Modification of P/M Parts without Furnace Treatments, Joseph William Newkirk and Anand Jambunathan
Heat Treatment of Powder Metallurgy Steel Components, Joseph William Newkirk and Sanjay N. Thakur
Chromate-Free Corrosion Protection, Matthew O'Keefe
Vibration Testing of Repaired Lead-tin/Lead-Free Solder Joints, Matthew O'Keefe, S. Vetter, D. Murry, J. Smith, P. Amick, Martin G. Perez, D. W. Kleine, and Richard S. Colfax
Inelastic Deformation Behavior of La0.6Sr0.4FeO3 Perovskite, Nina Orlovskaya, Harlan U. Anderson, Mykola Brodnikovskyy, Mykola Lugovy, and Michael John Reece
Thermochemistry of Sapphire Wetting by Steel Containing Both Aluminum and Titanium in Nitrogen Atmospheres, P. D. Ownby and Benjamin T. Eldred
Modeling of Field Distribution and Energy Storage in Diphasic Dielectrics, Sandeep K. Patil, Marina Koledintseva, and Robert W. Schwartz
Decreasing Electrical Energy Consumption through SiC Additions, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, John Carpenter, and Chen Wang
Improving Melting Efficiency through the Application of New Refractory Materials, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, Todd P. Sander, Jeffrey D. Smith, and Mangesh Vibhandik
Development of a Process to Continuously Melt, Refine and Cast High Quality Steel, Kent D. Peaslee, Von Richards, D. G. C. Robertson, and Jeffrey D. Smith
Effect of Nozzle Base Material on the Rate of Clogging during the Continuous Casting of Aluminum-Killed Steels, Kent D. Peaslee, Jeffrey D. Smith, Musa Karakus, and Luis Trueba Jr.
Simulation of Nozzle Clogging during the Continuous Casting of Aluminum-Killed Steel, Kent D. Peaslee, Jeffrey D. Smith, and Luis Trueba
Identification of Phases in Zinc Alloy Powders Using Electron Backscatter Diffraction, Martin G. Perez, Edward A. Kenik, Matthew O'Keefe, F. Scott Miller, and Benedict Y. Johnson
