Submissions from 1991
Feasible and Optimal Designs of Variable Air Gap Torque Motors, Ming-Chuan Leu and R. A. Aubrecht
Studying Robot Kinematics and Dynamics with the Aid of Mathematica, Ming-Chuan Leu, Zhiming Ji, and Y. S. Wang
Modeling and Analysis of Parts Mating in Vibration Assisted Compliant Assembly, Ming-Chuan Leu and Y. Liu
Mixed Convection Heat Transfer in Inclined Backward-Facing Step Flows, Jen-Tai Lin, Bassem F. Armaly, and T. S. Chen
Dynamic Analysis of a Motor-Gear-Mechanism System, Frank W. Liou, Arthur G. Erdman, and C. S. Lin
Design Considerations for Vibration Assisted Compliant Assembly, Y. Liu and Ming-Chuan Leu
Effects of Variation in Root Temperature on Heat Lost from a Thermally Non-Symmetric Fin, Dwight C. Look and Hyung Suk Kang
Numerical Simulation of Transverse Fuel Injection, M. Mao, David W. Riggins, and C. R. McClinton
Stress Concentration At Circular Cutouts in Buffer Strip Laminates, Eric Stephen Meyer and Lokeswarappa R. Dharani
Fore-aft Forces in Tire-wheel Assemblies Generated by Unbalances and the Influence of Balancing, J. Neely, Steven Pekarek, P. Beccue, N. Benavides, M. Ortbals, Daniel S. Stutts, and J. Banaskavich
Titan Atmospheric Composition By Hypervelocity Shock-layer Analysis, Harlan F. Nelson, Chul Park, and Ellis E. Whiting
Uncertainty and Compliance of Robot Manipulators with Applications to Task Feasibility, D. K. Pai and Ming-Chuan Leu
Control of Large Space Structures Using Reduced-order Models, Jayant V. Ramakrishnan, Vittal S. Rao, and Leslie Robert Koval
Efficient Use of Direct Solvers for the Calculation of Compressible Flows, David W. Riggins, R. W. Walters, and D. Pelletier
Effect Of Thickness On The Unsteady Aerodynamics Of Closely Coupled Oscillating Airfoils, K. Rokhsaz, B. P. Selberg, and Walter Eversman
Hybrid Expert System and Operations Research for Solving Nesting Problems, Martina Schollmeyer, James Quo-Ping Lin, K. Krishnamurty, Ali Bahrami, Gary Leininger, Cihan H. Dagli, and Frank W. Liou
Glass Fiber Based Friction Materials, N. Surramaniam, Brijnaresh R. Sinha, Frank D. Blum, Yung Rwei Chen, and Lokeswarappa R. Dharani
Determining the chemical composition of cloud condensation nuclei, Allen L. Williams, Darryl J. Alofs, Donald E. Hagen, Daniel R. White, A. R. Hopkins, and Max B. Trueblood
Deflections and Stresses of Antisymmetric Angle-Ply Clamped Plates under Transverse Loading, Amir H. Yahyavi and K. Chandrashekhara
Modeling and Performance Analysis of a Flexible Pcb Assembly Station Using Petri Nets, M.-C Zhou and Ming-Chuan Leu
Petri Net Modeling of a Flexible Assembly Station for Printed Circuit Boards, M. Zhou and Ming-Chuan Leu
Analysis Of Shear Banding In Plane Strain Compression Of A Bimetallic Thermally Softening Viscoplastic Body Containing An Elliptical Void, Z. G. Zhu and R. C. Batra
Shear Band Development In A Thermally Softening Viscoplastic Body, Z. G. Zhu and R. C. Batra
Submissions from 1990
Use of Energy in Data-Track Association and State Estimation in Multitarget-Multisensor Problems, S. N. Balakrishnan and H. Park
Multitarget Classification and Estimation Using Clustering Techniques, S. N. Balakrishnan and Bryon D. Tapley
Adiabatic Shear Banding In Elastic-viscoplastic Nonpolar And Dipolar Materials, R. C. Batra and Chang-Soo Kim
An Adaptive Mesh Refinement Technique For The Analysis Of Adiabatic Shear Banding, R. C. Batra and Chang-Soo Kim
Effect Of Integration Methods On The Solution Of An Adiabatic Shear Banding Problem, R. C. Batra and Chang-Soo Kim
Effect Of Viscoplastic Flow Rules On The Initiation And Growth Of Shear Bands At High Strain Rates, R. C. Batra and Chang-Soo Kim
The Interaction Among Adiabatic Shear Bands In Simple And Dipolar Materials, R. C. Batra and Chang-Soo Kim
Adiabatic Shear Banding In Dynamic Plane Strain Compression Of A Viscoplastic Material, R. C. Batra and De Shin Liu
Histories Of Stress, Strain-rate, Temperature, And Spin In Steady State Deformations Of A Thermoviscoplastic Rod Striking A Hemispherical Rigid Cavity, R. C. Batra and Lin Pei-Rong
An Approximate Analysis Of Steady State Axisymmetric Deformations Of Viscoplastic Targets, R. C. Batra and Chen Xingju
Shear Band Development In Dynamic Loading Of A Viscoplastic Cylinder Containing Two Voids, R. C. Batra and Xiong Zhang
Buckling and Bending of Beams Subject to a Nonuniform Thermal Field, Victor Birman
Divergence Instability of Reinforced Composite Circular Cylindrical Shells, Victor Birman
Thermal Dynamic Problems Of Reinforced Composite Cylinders, Victor Birman
Thermoelastic Problem Of A Thick Orthotopic Beam On Twodirectiooal Elastic Foundation, Victor Birman
Thermoelastic Problems of Multilayered Cylinders, Victor Birman
Dynamic Stability of Reinforced Composite Cylindrical Shells in Thermal Fields, Victor Birman and Charles W. Bert
Effect of Aerodynamic Heating on Deformation of Composite Cylindrical Panels in a Gas Flow, Victor Birman, Charles W. Bert, and Isaac Elishakoff
Supersonic Flutter of Shear Deformable Laminated Composite Flat Panels, Victor Birman and Liviu Librescu
Buckling of Multilayered Composite Plates under Uniform Temperature Field, K. Chandrashekhara
Free Vibration of Composite Beams Including Rotary Inertia and Shear Deformation, K. Chandrashekhara, K. Krishnamurthy, and Samit Roy
Analysis of a Thick Transversely Isotropic Circular Cylindrical Shell Subjected to Asymmetric Load, K. Chandrashekhara and B. S. Kumar
Bending of Cross-Ply Laminated Clamped Plates Using Lagrange Multipliers, K. Chandrashekhara, Amir H. Yahyavi, and P. R. Rao
Analysis of Antisymmetric Angle-Ply Clamped Plates, K. Chandrashekhara and Y. H. Yahyavi
Shrinkage-Induced Fluid Flow and Domain Change During Solidification of Pure Substances, F. C. Chang and Hai-Lung Tsai
A Stress Ratio Parameter for Studying the Workability of Metals-Extrusion, Hen-Li Chen, T. F. Lehnhoff, and Sokka M. Doraivelu
A Stress Ratio Parameter for Studying the Workability of Metals-Tension and Compression, Hen-Li Chen, T. F. Lehnhoff, and Sokka M. Doraivelu
A High-Order Theory for Laminated Composite Plates Using Lagrange Multiplier Technique, Virat Chomkwah and Xavier J. R. Avula
Eigenvalue and Eigenvector Determination for Nonclassically Damped Dynamic Systems, Don Cronin
Three-Dimensional Radiative Transfer for Anisotropic Scattering Medium with Refractive Index Greater Than Unity, Alfred L. Crosbie and Sen-Ming Shieh
Analysis Of A Ceramic Matrix Composite Flexure Specimen, Lokeswarappa R. Dharani
Analysis of a Ceramic Matrix Composite Flexure Specimen, Lokeswarappa R. Dharani
Steady-State Cracking in Ceramic Matrix Composites, Lokeswarappa R. Dharani, Li Chai, and N. J. Pagano
Effect of Heat-Treat Condition on Residual Strength of Metal Matrix Composites, Lokeswarappa R. Dharani and M. W. Kennett
Effect of Hygrothermal Stresses on Interface Fracture, Lokeswarappa R. Dharani and H. Tang
Initiation and Growth of Delamination Along 0/90 Interfaces in Laminates, Lokeswarappa R. Dharani and H. Tang
Micromechanics Characterization of Sublaminate Damage, Lokeswarappa R. Dharani and H. Tang
Optical Constants Of Liquid Isooctane At 3.39 Μm, James A. Drallmeier and J. E. Peters
An Experimental Investigation Of Fuel Spray Vapor Phase Characterization, J. A. Drallmeier and J. E. Peters
Analytical Study of Wind-Tunnel Acoustic Testing of Propellers, Walter Eversman
Reduced Cost Rational-Function Approximation for Unsteady Aerodynamics, Walter Eversman and Ashish Tewari
Visual Study on Vortex Developments Over Airfoils After Impulsive Start, Fathi Finaish
The Influence of a Rotating Leading Edge on Accelerating Starting Flow over an Airfoil, Fathi Finaish and R. W. Jefferies
Technical Feasibility of Generating Electric Power from Oat Hull Gasification, V. J. Flanigan, Luis Cruz Baja, and M. S. Dunham
Review Of Simple Heat Release Computations, Barbara M. Grimm and R. (Richard) T. Johnson
A Study of the Hydration Properties of Selected Laser Dye Aerosols Including Continuous-Flow Parallel Plate and Alternating-Gradient Thermal Diffusion Cloud Chamber Measurements in the High Supersaturation Regime, Donald E. Hagen, Max B. Trueblood, and Darryl J. Alofs
A Study of the Hydration Properties of Selected Laser Dye Aerosols Including Continuous-Flow Parallel Plate and Alternating-Gradient Thermal Diffusion Cloud Chamber Measurements in the High Supersaturation Regime, Donald E. Hagen, Max B. Trueblood, and Darryl J. Alofs
A Complete Model Characterization of Brushless DC Motors, N. Hemati and Ming-Chuan Leu
Robust Nonlinear Control of Brushless DC Motors for Direct-Drive Robotic Applications, N. Hemati, J. S. Thorp, and Ming-Chuan Leu
Robust Nonlinear Control of Brushless DC Motors in the Presence of Magnetic Saturation, N. Hemati, J. S. Thorp, and Ming-Chuan Leu
Graphical, User-Driven Newton-Raphson Technique for Use in the Analysis and Design of Compliant Mechanisms, T. C. Hill and Ashok Midha
A Study of Single-Link Robots Fabricated from Orthotropic Composite Materials, K. Krishnamurthy, K. Chandrashekhara, and Samit Roy
Feedback Control of a Flexible Cylindrical Manipulator, K. Krishnamurthy and M. S. Lu
Non-Parallel Thermal Instability of Forced Convection Flow Over a Heated, Non-Isothermal Horizontal Flat Plate, Hsien-Ren Lee, T. S. Chen, and Bassem F. Armaly
Navier-Stokes Computations of Transition to Turbulent Flow Around Airfoils, S. C. Lee and Chang-Ren Chen
Unsteady Flow Over a Butterfly Valve, S. C. Lee and Chang-Ren Chen
The Fractal Dimension As A Measure Of The Roughness Of Rock Discontinuity Profiles, Y. H. Lee, J. R. Carr, David J. Barr, and Charles J. Haas
A Differential Equation Approach to Swept Volumes, Ming-Chuan Leu and Denis Blackmore
Mixed Convection in Buoyancy-Assisting, Vertical Backward-Facing Step Flows, Jen-Tai Lin, Bassem F. Armaly, and T. S. Chen
Comparisons In Back-scatter And Radial-scatter Of Incident Linearly And Circularly Polarized Light, Dwight C. Look
Determining the Absorption and Scattering Coefficients of Suspended Particles: A Feasibility Study, Dwight C. Look
On Methods for Evaluation of Parametric Stability and Response of Flexible Cam-Follower Systems, A. I. Mahyuddin, Ashok Midha, and A. K. Bajaj
A Computational Investigation of Flow Losses in a Supersonic Combustor, C. McClinton and David W. Riggins
Influence Of Fin Planform Shape On Lift And Center Of Pressure For Supersonic Missiles, Harlan F. Nelson and M. V. Talpallikar
Control and Simulation of Servomotor Systems Using Macintosh Iix, Y. Park and Ming-Chuan Leu
Macintosh IIx and IBM PC Based Automatic Control Laboratory, Y. Park, Ming-Chuan Leu, and G. Zhou
Advisory Expert System for Preliminary Design and Finite Element Modelling of High Speed Mechanisms, Abani Kumar Patra and Frank W. Liou
Survey of the Experimental Studies on Flexible Mechanisms, Kwei-Cheng Peng and Frank W. Liou
The Numerical Determination of Nominal Libration Point Trajectories and Development of a Station-Keeping Strategy, Henry J. Pernicka
Sun-Earth Libration Point Trajectories That Avoid the Solar Exclusion Zone, Henry J. Pernicka and K. C. Howell
Turbulent Mixed Convection Over an Isothermal Horizontal Flat Plate, N. Ramachandran, Bassem F. Armaly, and T. S. Chen
Multivariable Routh-approximant Model Reduction Method in the Time Domain, Jayant V. Ramakrishnan, Vittal S. Rao, and Leslie Robert Koval
Static Stability and Control Characteristics of Scissor Wing Configurations, K. Rokhsaz and B. P. Selberg
Combined Solar And Internal Load Effects On Selection Of Heat Reclaim-economizer HVAC Systems, Harry J. Sauer, Ronald Hunter Howell, and Zijie Wang
Alternate Table Look-up Routine For Real-time Digital Flight Simulation, Michael K. Sinnett, James E. Steck, Bruce P. Selbert, and Robert B. Oetting
Parallel Implementation of a Recursive Least Squares Neural Network Training Method on the Intel IPSC/2, James Edward Steck, Bruce M. McMillin, K. Krishnamurthy, M. Reza Ashouri, and Gary G. Leininger
Force Control of High-Speed, Lightweight Robotic Manipulators, H. J. Su, Byung Oh Choi, and K. Krishnamurthy
