Submissions from 2005
Tellurium Thermodynamics in Austenitic Iron, Govind Sharan Gupta, D. G. C. Robertson, and Mark E. Schlesinger
Use of DSC to Distinguish Grades of Mozzarella Cheese, Jason B. Harris and Mark E. Schlesinger
Report on the "NSF-AFOSR Joint Workshop on Future Ultra-high Temperature Materials", Greg Hilmas and William Fahrenholtz
Silicon Carbide Ceramics for Aerospace Applications- Processing, Microstructure, and Property Assessments, Greg Hilmas, William Fahrenholtz, Andrew A. Buchheit, and Douglas M. Deason
Oxidation of ZrB₂-SiC Ceramics under Atmospheric and Reentry Conditions, Greg Hilmas, William Fahrenholtz, Adam L. Chamberlain, and Donald T. Ellerby
Freeze-Form Extrusion Fabrication of Ceramics, Tieshu Huang, Michael S. Mason, Greg Hilmas, and Ming-Chuan Leu
High Temperature Properties of an Iron Phosphate Melt Containing High Chrome Nuclear Waste, Wen-Hai Huang, C. S. Ray, Cheol-Woon Kim, and D. E. Day
Effect of Cr2O3 on the HLW Iron Phosphate Glass Wasteforms, Wen Hai Huang, Nai Zhou, Delbert E. Day, and Chandra S. Ray
Effect of Cr₂O₃ on the HLW Iron Phosphate Glass Wasteforms, Wenhai Huang, Nai Zhou, D. E. Day, and C. S. Ray
Glass Structure and Chemical Durability of Phosphate Glass Wasteforms Containing High Level Radioactive Nuclear Waste, Wenhai Huang, Nai Zhou, D. E. Day, and C. S. Ray
Impedance Studies of Diffusion Phenomena and Ionic and Electronic Conductivity of Cerium Oxide, Piotr Z. Jasinski, Vladimir Petrovsky, Toshio Suzuki, and Harlan U. Anderson
Electrical Properties of YSZ Films Prepared by Net Shape Technology, Piotr Z. Jasinski, Vladimir Petrovsky, Toshio Suzuki, Tatiana Petrovsky, and Harlan U. Anderson
Nanocomposite Nickel Ceria Cermet with Low Nickel Content for Anode-Supported SOFCs, Piotr Z. Jasinski, Toshio Suzuki, Vladimir Petrovsky, and Harlan U. Anderson
High Strain Rate Superplastic Properties of 7075 Aluminum via Friction Stir Processing, L. B. Johannes, Rajiv S. Mishra, and Indrajit Charit
Microstructural Characteristics of Cerium Oxide Conversion Coatings Obtained by Various Aqueous Deposition Methods, Benedict Y. Johnson, A. Williams, Matthew O'Keefe, and Joe Edington
Coarsening of BaCeO3 and Y2BaCuO5 Particles in YBa2Cu3O7-X Semisolid Melt, Oratai Jongprateep and Fatih Dogan
Coarsening of BaCeO₃ and Y₂BaCuO₅ Particles in YBa₂Cu₃O₇₋ₓ Semisolid Melt, Oratai Jongprateep and Fatih Dogan
Effect of BaCeO3 and BaSnO3 additives on microstructural development and critical current density of melt textured YBa2Cu3O7-x, Oratai Jongprateep, Fatih Dogan, Michael Strasik, and Kevin E. McCrary
Laser Metal Deposition of Functionally Graded Copper and Steel, Vinay Kadekar, Frank W. Liou, and Joseph William Newkirk
An EXAFS Investigation of Rare-Earth Local Environment in Ultraphosphate Glasses, M. Karabulut, E. Metwalli, A. K. Wittenauer, Richard K. Brow, G. K. Marasinghe, C. H. Booth, J. J. Bucher, and D. K. Shuh
Corrosion Resistance of Metal Electrodes in an Iron Phosphate Melt, Chang-Soo Kim, D. Zhu, and D. E. Day
Corrosion Resistance of Metal Electrodes in an Iron Phosphate Melt, Cheol-Woon Kim, Dongmei Zhu, and D. E. Day
Structure, Magnetic, and Transport Properties of Ti-substituted La₀.₇Sr₀.₃MnO₃, M. S. Kim, Jinbo Yang, Qingsheng Cai, X.-D. Zhou, William Joseph James, William B. Yelon, D. Buddhikot, Satish K. Malik, and Paul Ernest Parris
The Effect of Cu-Doping on the Magnetic and Transport Properties of La₀.₇Sr₀.₃MnO₃, M. S. Kim, Jinbo Yang, Qingsheng Cai, X.-D. Zhou, William B. Yelon, Paul Ernest Parris, and William Joseph James
The Wettability of Titanium Diboride by Molten Aluminum Drops, W. J. Krafick, P. D. Ownby, G. Ackart, and D. A. Weirauch Jr.
Positron Annihilation of Defects in Metals and Alloys, Hollis P. Leighly
Research on a Hybrid Manufacturing Process for Aerospace Structures, Frank W. Liou, Kevin P. Slattery, J. Choi, Hsin-Nan Chou, Mary Kinsella, Joseph William Newkirk, and K. Young
Synthesis and Characterization of Aluminum-polyaniline Thin Films and Membranes, Yan Liu, Matthew O'Keefe, Ayse Beyaz, and Thomas P. Schuman
The Forge Welded Iron Cannon Near Fateh Burj of Golconda Fort Rampart, Surender Maddela, J. Shankar, and R. Balasubramaniam
Stem Cell-based Composite Tissue Constructs for Regenerative Medicine, Jeremy J. Mao and M. N. Rahaman
Borate Glass Supports the in Vitro Osteogenic Differentiation of Human Mesenchymal Cells, Nicholas W. Marion, Wen Liang, Gwendolen C. Reilly, D. E. Day, M. N. Rahaman, and Jeremy J. Mao
Borate Glass Supports the In Vitro Osteogenic Differentiation of Human Mesenchymal Stem Cells, Nicholas W. Marion, Wen Liang, Gwendolen C. Reilly, D. E. Day, M. N. Rahaman, and Jeremy J. Mao
Development of Ultrafine-grained Microstructure and Low Temperature (0.48 Tm) Superplasticity in Friction Stir Processed Al-Mg-Zr, Z. Y. Ma and Rajiv S. Mishra
Anomolus Shrinkage of Lanthanum Strontium Manganite, Benjamin McCarthy, Harlan Andersen, Xaio Dong Zhou, Larry Pederson, Gregory Coffey, and Prabhakar Singh
Investigation of Wire Electrical Discharge Machining of Thin Cross-sections and Compliant Mechanisms, F. Scott Miller, Chen-Chun Kao, Albert Shih, and Jun Qu
Approaches toward Integrating Functionality into Structural Materials, Rajiv S. Mishra
Integral Channels in Metal Components and Fabrication Thereof, Rajiv S. Mishra
Creep Behavior of Extruded Al-6Mg-1Sc-1Zr-10 Vol.% SiCp Composite, Rajiv S. Mishra, S. P. Deshmukh, and K. L. Kendig
Laminated Metal Composites—high Temperature Deformation Behavior, Rajiv S. Mishra, R. B. Grishaber, A. V. Sergueeva, and A. K. Mukherjee
Friction Stir Welding and Processing, Rajiv S. Mishra and Z. Y. Ma
Embedding a Wrought Microstructure in a Cast Component: A Novel Application of Friction Stir Processing, Rajiv S. Mishra, M. R. Sharma, and Murray W. Mahoney
Studies of Lead-iron-phosphate Glasses by Raman, Mössbauer and Impedance Spectroscopy, Andrea Moguš-Milanković, Signo Tadeu Dos Reis, A. Šantić, D. E. Day, and Kresimir Furic
Dielectric Behavior and Impedance Spectroscopy of Bismuth Iron Phosphate Glasses, Andrea Moguš-Milanković, A. Šantić, V. Licina, and D. E. Day
Friction Stir Microforming of Superplastic Alloys, Saurav Mohan and Rajiv S. Mishra
Effects of Processing on Sinter Hardened Steel Parts, Joseph William Newkirk, G. B. Fillari, Sanjay N. Thakur, T. F. Murphy, and K. S. Narasimhan
Local Modification of P/M Parts to Fully Densify and Enhance Properties, Joseph William Newkirk, Anand Jambunathan, Julie Ply, and Rajiv S. Mishra
Stressed-Biased Actuators: Fatigue and Lifetime, W. D. Nothwang, M. W. Cole, and Robert W. Schwartz
Stressed-Biased Actuators: Lateral Stress and Loading Effects, W. D. Nothwang, M. W. Cole, and Robert W. Schwartz
Aerospace Rework in a Lead-Free World, Matthew O'Keefe and Richard Colfax
Quantitative Phase Analysis of Reactive Wetting of Mullite by Silicate Glasses, P. D. Ownby, W. Braue, B. Hildmann, and Benjamin T. Eldred
Fourier Transform Infrared Analysis of Hydroxyl Content of Hydrothermally Processed Heteroepitaxial Barium Titanate Films, Sandeep K. Patil, Nipun Shah, Frank D. Blum, and M. N. Rahaman
Challenges Facing the Steel Industry in Attracting and Training Engineers, Kent D. Peaslee
Materials Education at the University of Missouri-Rolla: Educating Metallurgical and Ceramic Engineers, Kent D. Peaslee
Efficiency in Steel Melting: Opportunities and Progress, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, and Jay Triplett
Efficiency in Steel Melting: Ladle Development, Kent D. Peaslee, Semen Naumovich Lekakh, Todd P. Sander, and Jeffrey D. Smith
Alloy Recovery and Control in Steel Melting, Kent D. Peaslee, Darryl S. Webber, Semen Naumovich Lekakh, and Bradley Randall
Experimental Study of Kinetic Processes during the Steel Treatment at Two LMF's, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, and Brian G. Thomas
Introduction of a Novel, Scrap-Based, Fully Continuous Steelmaking Process, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, Lifeng Zhang, and Brian G. Thomas
Influence of the Grain Boundaries on Conductivity of Yttrium Stabilized Zirconia, Vladimir Petrovsky, Piotr Z. Jasinski, Tatiana Petrovsky, and Harlan U. Anderson
Low-temperature Processed Anode for Solid Oxide Fuel Cells, Vladimir Petrovsky, Toshio Suzuki, Piotr Z. Jasinski, and Harlan U. Anderson
Utilizing NDE Methods for Steel Casting Performance, David Poweleit, Raymond Monroe, and Von Richards
Preparation and Bioactive Characteristics of Porous Borate Glass Substrates, M. N. Rahaman, Wen Liang, D. E. Day, Nicholas W. Marion, Gwendolen C. Reilly, and Jeremy J. Mao
Preparation and Bioacttve Characteristics of Porous Borate Glass Substrates, M. N. Rahaman, Wen Liang, D. E. Day, Nicholas W. Marion, Gwendolen C. Reilly, and Jeremy J. Mao
A New DTA Method for Measuring Critical Cooling Rate for Glass Formation, C. S. Ray, Signo Tadeu Dos Reis, Richard K. Brow, Wolfram Höland, and Volker M. Rheinberger
Thermodynamics of Refractories for Black Liquor Gasification, Alireza Rezaie, William L. Headrick, and William Fahrenholtz
The Effects of MIM Processing Parameters on Variations in Part Weights and Dimensions, James Alan Sago and Joseph William Newkirk
Direct, Controlled Synthesis of the Nonimmunogenic Hydrophilic Polymer, Poly(N-(2-Hydroxypropyl)methacrylamide) Via RAFT in Aqueous Media, Charles W. Scales, Yulia A. Vasilieva, Anthony J. Convertine, Andrew B. Lowe, and Charles L. McCormick
Modeling of Field Distribution and Energy Storage in Diphasic Dielectrics, Robert W. Schwartz and Sandeep K. Patil
Glassmaking: Adding Value, Improving Quality, T. P. Seward III, Carlo G. Pantano, and Richard K. Brow
Elevated Temperature Deformation Behavior of Nanostructured Al-Ni-Gd-Fe Alloys, X. L. Shi, Rajiv S. Mishra, and T. J. Watson
Phase Equilibria Diagrams of One Component, Jeffrey D. Smith
Lime-Based Plasma Spray Coatings on Steelmaking Nozzles, Jeffrey D. Smith, Kent D. Peaslee, and David C. Van Aken
Journal of Materials Engineering and Performance: Editorial, C. Suryanarayana, Leon L. Shaw, and Rajiv S. Mishra
The Optical and Elecrtical Properties of Nanocrystalline La 0.4Sr0.6TiO3 Thin Films, Toshio Suzuki, Piotr Z. Jasinski, Vladimir Petrovsky, and Harlan U. Anderson
The Optical Properties and Band Gap Energy of Nanocrystalline La₀.₄Sr₀.₆TiO₃ Thin Films, Toshio Suzuki, Piotr Z. Jasinski, Vladimir Petrovsky, and Harlan U. Anderson
Performance of a Porous Electrolyte in Single-Chamber SOFCs, Toshio Suzuki, Piotr Z. Jasinski, Vladimir Petrovsky, Fatih Dogan, and Harlan U. Anderson
Characterization of the Nanoscale Microstructure of an Immersion Silver on Sputtered Copper, Dian Tang, Zhe Liang Wei, Yan Qun Shao, Shao Xin You, Mathew O'Keefe, and Thomas J. O'Keefe
Interaction of Alumina Inclusions in Steel with Calcium-Containing Materials, Robert B. Tuttle, Jeffrey D. Smith, and Kent D. Peaslee
Method and Sealant for Weld Joints, David C. Van Aken, John A. Baumann, Richard J. Lederich, and Rajesh Talwar
Growth of II-IV-V₂ Chalcopyrite Nitrides by Molecular Beam Epitaxy, J. E. Van Nostrand, J. D. Albrecht, R. Cortez, K. D. Leedy, Benedict Y. Johnson, and Matthew O'Keefe
High-Temperature Monitoring of Refractory Wall Recession Using Frequency-modulated Continuous-wave (FM-CW) Radar Techniques, Bivin Varghese, C. DeConick, G. Cartee, M. Velez, Robert E. Moore, and R. Zoughi
Nickel Dissolution in Argon Stirred Steel, Darryl S. Webber, Kent D. Peaslee, and Von Richards
Foundry Size Ladle Metallurgy Vessel: Ferromanganese Dissolution, Darryl S. Webber, Von Richards, and Kent D. Peaslee
The Wettability of Titanium Diboride by Molten Aluminum Drops, D. A. Weirauch, W. J. Krafick, G. Ackart, and P. D. Ownby
An EXAFS Investigation of Rare-Earth Local Environment in Ultraphosphate Glasses, Andrew K. Wittenauer, Richard K. Brow, Mevlüt Karabulut, Ezz Metwalli, G. K. Marasinghe, C. H. Booth, J. J. Bucher, and D. K. Shuh
Numerical and Experimental Analysis for Laser Surface Densification of Plasma Sprayed Coatings, J. Wu, J. Choi, Shi C. Zhang, and Greg Hilmas
Study of the Electronic Structure of CaFeO₃, Jinbo Yang, M. S. Kim, Qingsheng Cai, X.-D. Zhou, Harlan U. Anderson, William Joseph James, and William B. Yelon
Magnetic and Transport Properties of Nanocomposite Fe/Fe₃₋δO₄ and Fe₃₋δO₄ Films Prepared by Plasma-enhanced Chemical Vapour Deposition, Jinbo Yang, Satish K. Malik, X.-D. Zhou, M. S. Kim, William B. Yelon, Harlan U. Anderson, and William Joseph James
Designing a New Scrap-Based Continuous Steelmaking Process using CFD Simulation, Lifeng Zhang, Jun Aoki, Brian G. Thomas, Jörg Peter, and Kent D. Peaslee
Comparative Study on Fatigue Properties of Friction Stir and MIG-Pulse Welded Joints in 5083 Al-Mg Alloy, Caizhi Zhou, Xinqi Yang, and Guohong Luan
Fatigue Properties of Friction Stir Welds in Al 5083 Alloy, Caizhi Zhou, Xinqi Yang, and Guohong Luan
Defect Chemistry of Ternary Oxides, X.-D. Zhou and Harlan U. Anderson
Coupled Electrical and Magnetic Properties in (La,Sr)FeO3-δ, X.-D. Zhou, Qingsheng Cai, Jinbo Yang, M. S. Kim, William B. Yelon, William Joseph James, Y.-W. Shin, B. J. Scarfino, and Harlan U. Anderson
Electrical and Structural Properties of La(Fe,M)O₃ (M = Mn, Ni, Cu), X.-D. Zhou, Qingsheng Cai, Jinbo Yang, B. J. Scarfino, Y. Shin, William Joseph James, William B. Yelon, Harlan U. Anderson, and L. R. Pederson
Size Effect on the Electronic Properties of Doped and Undoped Ceria, X.-D. Zhou, Wayne Huebner, and Harlan U. Anderson
Some Aspects of Defect Chemistry in P-Type Perovskite Conductors, Xiao Dong Zhou and Harlan U. Anderson
Corrosion Behavior of Inconel 690 & 693 in an Iron Phosphate Melt, Dongmei Zhu, Cheol-Woon Kim, and D. E. Day
Phase and Homogenization of Lead Borate Glasses under Low, Normal or High Gravity, Dongmei Zhu, Fa Luo, Wancheng Zhou, C. S. Ray, and D. E. Day
Submissions from 2004
The Effect of the Physical and Chemical Nature of Titanium Diboride on its Wettability by Aluminum, G. Ackart, P. D. Ownby, W. J. Krafick, and D. A. Weirauch Jr.
Iron - Phosphate Glass (IPG) Waste Forms Produced Using Induction Melter with Cold Crucible, Albert S. Aloy, Roman A. Soshnikov, Alexander V. Trofimenko, D. Gombert, D. E. Day, and Cheol-Woon Kim
