Submissions from 2019
Filtration Efficiency of Inclusions in FeMnAl Steels, Koushik K. Balasubramanian, Soumava Chakraborty, Laura Bartlett, Ronald J. O'Malley, and Mingzhi Xu
Analysis of Hot- and Cold-Rolled Loads in Medium-Mn TRIP Steels, Mario F. Buchely, D. M. Field, and David C. Van Aken
The Use of Genetic Algorithms to Calibrate Johnson-Cook Strength and Failure Parameters of AISI/SAE 1018 Steel, Mario F. Buchely, X. Wang, David C. Van Aken, Ronald J. O'Malley, Semen Naumovich Lekakh, and K. Chandrashekhara
Effect of Physical State of Non-Metallic Inclusions on the Accumulation Within Magnesia-Stabilized Zirconia Foam Filters, Soumava Chakraborty, Ronald J. O'Malley, Laura Bartlett, and Logan Huddleston
Grain Refinement in Iron-Based Materials, Simon Naumovich Lekakh, Von Richards, Ronald J. O'Malley, and Jun Ge
Inclusion Evolution and Removal in Ladle Refining, Ronald J. O'Malley
Influence of TiN Additions on the Microstructure of a Lightweight Fe-Mn-Al Steel, Rairu Vaz Penna, Laura Bartlett, and Ronald J. O'Malley
Modeling and Simulation of Dynamic Recrystallization Behavior in Alloyed Steel 15V38 during Hot Rolling, Xin Wang, K. Chandrashekhara, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Effect of Vanadium and Aluminum Grain Refining Treatment on Steel Machinability, Xueliang Zhang, Semen Naumovich Lekakh, Ronald J. O'Malley, Eduardo Scheid, Mark C. Emmendorfer, and Michael Fox
Control Upstream Austenite Grain Coarsening during Thin Slab Casting Direct Rolling (TSCDR) Process, Tihe Zhou, Ronald J. O'Malley, Hatem S. Zurob, Mani Subramanian, San-Hyun Cho, and Peng Zhang
Submissions from 2018
Size Distribution Evolution of Inclusions in Aluminum Killed-Calcium Treated Steel during Steelmaking, Casting and Hot Rolling, Obinna M. Adaba, Ronald J. O'Malley, Mingzhi Xu, and Laura Bartlett
Two Inoculation Methods for Refining As-Cast Grain Structure in Austenitic 316L Steel, Dusint A. Arvola, Semen Naumovich Lekakh, Ronald J. O'Malley, and Laura Bartlett
Effect of Phase Solidification Sequence in Stainless Steel on Grain Refining Efficiency, Dustin Arvola, Semen Naumovich Lekakh, Ronald J. O'Malley, and Laura Bartlett
Rolling Pressures during the Hot-Roll of Three Different Steel Plates: Experimental, Analytical and FEA, Mario F. Buchely, David C. Van Aken, Ronald J. O'Malley, Xin Wang, K. Chandrashekhara, and Semen Naumovich Lekakh
Efficiency of Solid Inclusion Removal from the Steel Melt by Ceramic Foam Filter: Design and Experimental Validation, Soumava Chakraborty, Ronald J. O'Malley, Laura Bartlett, and Mingzhi Xu
An Investigation of the Machinability of Abrasion Resistant AR450 Steel, Mark C. Emmendorfer; Semen Naumovich Lekakh; Laura Bartlett; Ronald J. O'Malley; and For full list of authors, see publisher's website.
Effect of Aluminum and Vanadium Fine Grain Practice on the Machinability of 4140 Steel, Mark C. Emmendorfer; Semen Naumovich Lekakh; Laura Bartlett; Ronald J. O'Malley; and For full list of authors, see publisher's website.
Chemistry and Properties of Medium-Mn Two-Stage TRIP Steels, Daniel M. Field, Jingjing Qing, and David C. Van Aken
Dynamic Strain Aging Phenomena and Tensile Response of Medium-Mn TRIP Steel, Daniel M. Field and David C. Van Aken
Three-Dimensional Study of Inclusion Morphology and Size Distribution in Mn-Si-Killed Steel, Semen Naumovich Lekakh, Ronald J. O'Malley, Laura Bartlett, Obinna Adaba, and Mingzhi Xu
Modeling and Simulation of Mass Flow of Steel Plate/Slab during Hot Rolling, X. Wang, S. Ganguly, K. Chandrashekhara, Mario F. Buchely, Semen Naumovich Lekakh, David C. Van Aken, Ronald J. O'Malley, D. Bai, Y. Wang, and T. Natarajan
Submissions from 2017
Factors Affecting the Evolution of Inclusion Populations during Steelmaking and Casting Processes, Obinna Adaba, Laura Bartlett, Mingzhi Xu, and Ronald J. O'Malley
Hot Rolling Effect upon the High Temperature Johnson-Cook Strength and Failure Models for a 15V38 Grade Steel, Mario F. Buchely, David C. Van Aken, Ronald J. O'Malley, K. Chandrashekhara, and Semen Naumovich Lekakh
On the Prediction of α-Martensite Temperatures in Medium Manganese Steels, Daniel M. Field, Daniel S. Baker, and David C. Van Aken
Optimization of Melt Treatment for Austenitic Steel Grain Refinement, Semen Naumovich Lekakh, Jun Ge, Von Richards, Ronald J. O'Malley, and Jessica R. TerBush
Control of Columnar to Equiaxed Transition in Solidification Macrostructure of Austenitic Stainless Steel Castings, Semen Naumovich Lekakh, Ronald J. O'Malley, Mark C. Emmendorfer, and Brenton Hrebec
Inclusion Evolution and Removal in Ladle Refining, Ronald J. O'Malley
Influence of Mold Flux Crystallite Film Fracture on Thermal Fluctuations in a Thin Slab Funnel Mold, Ronald J. O'Malley, E. I. Peterson, Jeffrey D. Smith, S. Jauch, M. McClymonds, and N. Sutcliffe
Investigation of Mold Flux Crystallization by Rapid Quenching and Isothermal Aging in Molten Tin, Elizabeth I. Peterson, T. P. Sander, Jeffrey D. Smith, and Ronald J. O'Malley
Solid Silver Embrittlement of Ti-6Al-2Sn-4Zr-2Mo Alloy, Jingjing Qing, David C. Van Aken, Mario F. Buchely, Michael A. Walker, Royle W. Juusola, and John E. Goethe
Modeling of Mass Flow Behavior of Hot Rolled Low Alloy Steel based on Combined Johnson-Cook and Zerilli-Armstrong Model, X. Wang, K. Chandrashekhara, Seth A. Rummel, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Inverse Finite Element Modeling of the Barreling Effect on Experimental Stress-Strain Curve for High Temperature Steel Compression Test, X. Wang, H. Li, K. Chandrashekhara, Seth A. Rummel, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Submissions from 2016
Characteristics of Spinel Inclusions formed after Reoxidation of Calcium Treated Aluminum Killed Steel, Obinna Adaba, Pallava Kaushik, Ronald J. O'Malley, Semen Naumovich Lekakh, Von Richards, Erik Mantel, Randy Hall, and Eric J. Ellis
Comparison of CFD Simulations with Experimental Measurements of Nozzle Clogging in Continuous Casting of Steels, Mahdi Mohammadi-Ghaleni, Mohsen Asle Zaeem, Jeffrey D. Smith, and Ronald J. O'Malley
Computational Fluid Dynamics Study of Molten Steel Flow Patterns and Particle-Wall Interactions Inside a Slide-Gate Nozzle by a Hybrid Turbulent Model, Mahdi Mohammadi-Ghaleni, Mohsen Asle Zaeem, Jeffrey D. Smith, and Ronald J. O'Malley
Application of Cathodoluminescence in Analyzing Mold Flux Films, Elizabeth Nolte, Jeffrey D. Smith, Michael Frazee, Neil Sutcliffe, and Ronald J. O'Malley
Thermodynamic Driving Force of the γ → ε Transformation and Resulting Mₛ Temperature in High-Mn Steels, S. T. Pisarik and David C. Van Aken
Kinetics of Carbon Transfer from Magnesia-Graphite Ladle Refractories to Ultra-Low Carbon Steel, Andrew A. Russo, Jeffrey D. Smith, Ronald J. O'Malley, and Von Richards
Mechanism for Carbon Transfer from Magnesia-Graphite Ladle Refractories to Ultralow-Carbon Steel, Andrew A. Russo, Jeffrey D. Smith, Ronald J. O'Malley, and Von Richards
Submissions from 2015
An SEM/EDS Statistical Study of the Effect of Mini-Mill Practices on the Inclusion Population in Liquid Steel, Obinna Adaba, Marc Harris, Ronald J. O'Malley, Semen Naumovich Lekakh, Von Richards, and Neil Sutcliffe
Enhancing Grain Refinement of Austenitic Steel with Ti Additions by Melt Treatment Sequence Optimization, Gun Ge, Semen Naumovich Lekakh, and Ronald J. O'Malley
Improved Methodology for Automated SEM/EDS Non-Metallic Inclusion Analysis of Mini-Mill and Foundry Steels, Marc Harris, Obinna Adaba, Semen Naumovich Lekakh, Ronald J. O'Malley, and Von Richards
Evolution of Non-Metallic Inclusions in Foundry Steel Casting Processes, Marc Harris, Von Richards, Ronald J. O'Malley, and Semen Naumovich Lekakh
High Strain Rate Hot Deformation of Steels: Measurement and Simulation, Seth A. Rummel, David C. Van Aken, Ronald J. O'Malley, X. Wang, and K. Chandrashekhara
Modeling and Simulation of Hot Rolling using Nonlinear Material Models, Xin Wang, K. Chandrashekhara, Seth A. Rummel, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Submissions from 2014
First-Principles Study of Mn, Al and C Distribution and their Effect on Stacking Fault Energies in Fcc Fe, N. I. Medvedeva, M. S. Park, David C. Van Aken, and Julia E. Medvedeva
Submissions from 2013
Dynamic Fracture Toughness of High Strength Cast Steels, Laura Bartlett, Amla Dash, David C. Van Aken, Von Richards, and Kent D. Peaslee
Crack Formation during Foam Pattern Firing in the Investment Casting Process, W. A. Everhart, Semen Naumovich Lekakh, Von Richards, J. Chen, and K. Chandrashekhara
Corner Strength of Investment Casting Shells, W. A. Everhart, Semen Naumovich Lekakh, Von Richards, J. Chen, H. Li, and K. Chandrashekhara
Submissions from 2012
A Cyclic Forward-Backward Extrusion Process as a Novel Severe Plastic Deformation for Production of Ultrafine Grains Materials, Hamid Alihosseini, Mohsen Asle Zaeem, and Kamran Dehghani
Effects of Internal Stresses and Intermediate Phases on the Coarsening of Coherent Precipitates: A Phase-Field Study, Mohsen Asle Zaeem, Haitham El Kadiri, Mark Fredrick Horstemeyer, Marat Khafizov, and Zhandos N. Utegulov
Importance of Advanced High-Strength Steels and Electronic Units on the Recycling of Automobiles: A Review, Kyle Bevans, Matthew Chott, Brandon Ensor, Jamie Fitzgerald, Stephanie Martin, Kent D. Peaslee, Scott Pisarik, Luke S. Walker, Matthew Wilson, and Lifeng Zhang
Study of Void Closure in Hot Radial Forging Process Using 3D Nonlinear Finite Element Analysis, J. Chen, K. Chandrashekhara, Chirag Mahimkar, Semen Naumovich Lekakh, and Von Richards
On Laser Welding of Thin Steel Sheets, Emad M. El-Giar, Mohsen Asle Zaeem, Haitham El Kadiri, R. S. Florea, Hongjoo Rhee, Yves Bienvenu, Martin Dahmen, Thierry Malot, and Mohammed Zoubaïr Cherkaoui
Dissolution of Cerium from Cerium-Based Conversion Coatings on Al 7075-T6 in 0.1M NaCl Solutions, Simon Joshi, Elizabeth A. Kulp, William Fahrenholtz, and Matthew O'Keefe
On the Crystallography of Peritectic Austenite and the Role of Primary Ferrite in High Manganese and Aluminum Steels, Meghan C. McGrath and David C. Van Aken
Copper Precipitation in Cobalt-Alloyed Precipitation-Hardened Stainless Steel, Arpana S. Murthy, Julia E. Medvedeva, Dieter Isheim, Semen Naumovich Lekakh, Von Richards, and David C. Van Aken
Novel Modeling Concept for Vacuum Tank Degassing, Vivek Thapliyal, Semen Naumovich Lekakh, Kent D. Peaslee, and D. G. C. Robertson
Inverse Modeling for Determination of Thermal Properties of the Investment Casting Ceramic Mold, Mingzhi Xu, Semen Naumovich Lekakh, Von Richards, and Shelly A. Dutler
Formation and Modification of MgO·AI₂O₃-Based Inclusions in Alloy Steels, Shufeng Yang, Qiangqiang Wang, Lifeng Zhang, Jing-she Li, and Kent D. Peaslee
Investigation on MgO·AI₂O₃-Based Inclusions in Steels, Shu-feng Yang, Lifeng Zhang, Liyuan Sun, Jing-she Li, and Kent D. Peaslee
Fluid Flow, Solidification and Inclusion Entrapment during Steel Centrifugal Casting Process, Lifeng Zhang, Yufeng Wang, Edith Martinez, and Kent D. Peaslee
Submissions from 2011
Effect of the Compositional Strain on the Diffusive Interface Thickness and on the Phase Transformation in a Phase-Field Model for Binary Alloys, Mohsen Asle Zaeem, Haitham El Kadiri, Sinisa DJ Mesarovic, Mark Fredrick Horstemeyer, and Paul T. Wang
Investigating the Effects of Grain Boundary Energy Anisotropy and Second-Phase Particles on Grain Growth using a Phase-Field Model, Mohsen Asle Zaeem, Haitham El Kadiri, Paul T. Wang, and Mark Fredrick Horstemeyer
Void Closure Prediction in Cold Rolling Using Finite Element Analysis and Neural Network, J. Chen, K. Chandrashekhara, Chirag Mahimkar, Semen Naumovich Lekakh, and Von Richards
Improved Furnace Efficiency through the Use of Refractory Materials, James Gordon Hemrick, Angela Rodrigues-Schroer, D. Colavito, and Jeffrey D. Smith
The Effect of Carbon Distribution on the Manganese Magnetic Moment in Bcc Fe-Mn Alloy, N. I. Medvedeva, David C. Van Aken, and Julia E. Medvedeva
On the Homogenization of Cobalt Modified 17-4 PH Stainless Steel, Arpana S. Murthy, Semen Naumovich Lekakh, Von Richards, and David C. Van Aken
Process Simulation and Economic Feasibility Analysis for a Hydrogen-Based Novel Suspension Ironmaking Technology, Haruka K. Pinegar, Michael S. Moats, and Hong Yong Sohn
Fluid Flow and Steel Cleanliness in a Continuous Casting Tundish and Mold, Shu-feng Yang, Lifeng Zhang, Jing-she Li, and Kent D. Peaslee
Submissions from 2010
A Review of the Physical and Mechanical Properties of a Cast High Strength and Lightweight Fe-Mn-Al-C Steel, Laura Bartlett, Axel M. Schulte, David C. Van Aken, Kent D. Peaslee, and Ryan A. Howell
Three-Dimensional Nonlinear Finite Element Analysis of Hot Radial Forging Process for Large Diameter Tubes, J. Chen, K. Chandrashekhara, Von Richards, and Semen Naumovich Lekakh
The Effect of Post-Treatment Time and Temperature on Cerium-Based Conversion Coatings on Al 2024-T3, Daimon K. Heller, William Fahrenholtz, and Matthew O'Keefe
Tensile, High Strain Rate Compression and Microstructural Evaluation of Lightweight Age Hardenable Cast Fe-30Mn-9Al-XSi-0.9c-0.5Mo Steel, Ryan A. Howell, T. Weerasooriya, and David C. Van Aken
Fe-Mn-Al-C Austenitic Steels Treated by Ca and Ce, Semen Naumovich Lekakh, Von Richards, Axel M. Schulte, and David C. Van Aken
Effect of Cerium on the Inoculation of Acicular Ferrite in Hot-Rolled Fe-Mn-Al-Si-C Steel, Meghan C. McGrath, David C. Van Aken, and Von Richards
Mechanical Properties and their Dependence on Microstructure in Hot-Rolled 3rd Generation Advanced High Strength Steels, Meghan C. McGrath, David C. Van Aken, and Von Richards
Magnetism in Bcc and Fcc Fe with Carbon and Manganese, N. I. Medvedeva, David C. Van Aken, and Julia E. Medvedeva
Microstructure and Properties of NB, V and N Modified CB7CU-1 (17-4 PH) Steel, Arpana S. Murthy, Semen Naumovich Lekakh, Von Richards, and David C. Van Aken
Effects of Steel Processing on Property Variations in Eglin Steel (ES-1), Andrew O'Loughlin, Edwin Y. Martinez, Kent D. Peaslee, and Semen Naumovich Lekakh
Formation of Subsurface Crevices in Aluminum Alloy 2024-T3 during Deposition of Cerium-Based Conversion Coatings, William R. Pinc, Surender Maddela, Matthew O'Keefe, and William Fahrenholtz
Age Strengthening of Cast Irons: Review of Research and Literature, Jared Teague and Von Richards
Characterization of Localized Surface States of Al 7075-T6 during Deposition of Cerium-Based Conversion Coatings, Becky L. Treu, Simon Joshi, William R. Pinc, Matthew O'Keefe, and William Fahrenholtz
Submissions from 2009
Screening Study of Spray Solution Parameters for Depositing Cerium-Based Conversion Coatings on Al Alloy 2024-T3, Shujiang Geng, Pu Yu, Matthew O'Keefe, William Fahrenholtz, and Thomas J. O'Keefe
The Effect of Phosphate Source on the Post-Treatment of Cerium based Conversion Coatings on Al 2024-T3 and its Correlation to Corrosion Performance, Daimon K. Heller, William Fahrenholtz, and Matthew O'Keefe
Quench Sensitivity of Cast Fe-30mn-9Al-1Si-0.9c-0.50mo Lightweight Steel, Ryan A. Howell, Semen Naumovich Lekakh, and David C. Van Aken
Advancements in Steel for Weight Reduction of P900 Armor Plate, Ryan A. Howell, J. S. Montgomery, and David C. Van Aken
A Literature Review of Age Hardening Fe-Mn-Al-C Alloys, Ryan A. Howell and David C. Van Aken
Thermo-Chemistry of Non-Metallic Inclusions in Ductile Iron, Semen Naumovich Lekakh, Von Richards, and Kent D. Peaslee
Effects of Acid and Alkaline based Surface Preparations on Spray Deposited Cerium based Conversion Coatings on Al 2024-T3, William R. Pinc, Matthew O'Keefe, Thomas J. O'Keefe, William Fahrenholtz, and Shujiang Geng
Effect of Gelatin Additions on the Corrosion Resistance of Cerium based Conversion Coatings Spray Deposited on Al 2024-T3, William R. Pinc, Pu Yu, Matthew O'Keefe, and William Fahrenholtz
Investigation of Carbonic Anhydrase Assisted Carbon Dioxide Sequestration using Steelmaking Slag, C. Hank Rawlins, Semen Naumovich Lekakh, Kent D. Peaslee, and Von Richards
Optimization of Calcium Treatment to Improve Cleanliness of Cast Steel, Varsha I. Singh, Semen Naumovich Lekakh, Edwin Y. Martinez, and Kent D. Peaslee
Behavior of MgO·AI₂O₃ based Inclusions in Alloy Steel during the Refining Process, Shu-feng Yang, Jing-she Li, Lifeng Zhang, Kent D. Peaslee, and ZaiFei Wang
Structure Optimization of Horizontal Continuous Casting Tundishes using Mathematical Modeling and Water Modeling, Shufeng Yang, Lifeng Zhang, Jing-she Li, and Kent D. Peaslee
Fluid Flow and Steel Cleanliness in Argon-Stirred Ladles, Shu-feng Yang, Lifeng Zhang, Jing-she Li, Yufeng Wang, and Kent D. Peaslee
Submissions from 2008
Investigation of a Two-Stage Aqueous Reactor Design for Carbon Dioxide Sequestration using Steelmaking Slag, Semen Naumovich Lekakh, D. G. C. Robertson, C. Hank Rawlins, Von Richards, and Kent D. Peaslee
Energy Efficiency in Steel Casting Production, Raymond Monroe, Kent D. Peaslee, and R. Eppich
Improvements in Steel Melting Efficiency -- Industrial Trials, Kent D. Peaslee, Semen Naumovich Lekakh, and Edith Martinez
Carbon Dioxide Sequestration with Steelmaking Slag: Process Feasibility and Reactor Design, Kent D. Peaslee, Semen Naumovich Lekakh, C. Hank Rawlins, and Von Richards
