Submissions from 2008
Feasibility of Processing Steelmaking Slag for Carbon Dioxide Sequestration and Metal Recovery, C. Hank Rawlins, Kent D. Peaslee, and Von Richards
Sequestration of Carbon Dioxide by Steelmaking Slag: Process Phenomena and Reactor Study, Von Richards, C. Hank Rawlins, Semen Naumovich Lekakh, and Kent D. Peaslee
Fluid Flow and Inclusion Motion in Horizontal Continuous Casting Tundishes, Y. Shufeng, Lifeng Zhang, Kent D. Peaslee, L. Jingshe, S. Shaoqing, and Z. Zhu
Using Automated Inclusion Analysis for Casting Process Improvements, Vintee Singh, Semen Naumovich Lekakh, and Kent D. Peaslee
Iron: Stronger with Age, Jared Teague, Von Richards, Semen Naumovich Lekakh, and Kent D. Peaslee
Submissions from 2007
Prediction of Burn-On and Mould Penetration in Steel Casting using Simulation, B. E. Brooks, C. Beckermann, and Von Richards
Life Cycle Greenhouse Gas Emission Comparison of Steel Products with Other Materials, Christopher P. Buterbaugh, Meghan C. McGrath, Justin K. Novotny, Zane T. Voss, Joseph M. Brunner, and Kent D. Peaslee
Fracture Toughness of Ceramic Moulds for Investment Casting with Ice Patterns, Qingbin Liu, Ming-Chuan Leu, and Von Richards
Cerium-Based Conversion Coatings as Alternatives to Hex Chrome: Rare-Earth Compounds Provide Resistance Against Corrosion for Aluminum Alloys in Military Applications, Matthew O'Keefe, Simon Joshi, and Shujiang Geng
Increasing Energy Efficiency through Improvements in Ladle Materials and Practices, Kent D. Peaslee, Semen Naumovich Lekakh, Jeffrey D. Smith, and Mangesh Vibhandik
Mineralogical Sequestration of Carbon Dioxide through Aqueous Processing of Steelmaking Slag, C. Hank Rawlins, Semen Naumovich Lekakh, Von Richards, and Kent D. Peaslee
The Use of Steelmaking Slag for Mineralogical Sequestration of Carbon Dioxide - Aqueous Processing, C. Hank Rawlins, Semen Naumovich Lekakh, Von Richards, and Kent D. Peaslee
Experimental Study of CO₂ Sequestration by Steelmaking Slag, C. Hank Rawlins, Von Richards, Kent D. Peaslee, and Semen Naumovich Lekakh
Interaction of Molten Ultra-Low Carbon Steel with Carbide and Nitride Refractory Materials, Robert B. Tuttle, Kent D. Peaslee, and Jeffrey D. Smith
Casting Simulation of Calcium Titanate and Calcium Zirconate Nozzles for Continuous Casting of Aluminum-Killed Steels, Robert B. Tuttle, Jeffrey D. Smith, and Kent D. Peaslee
Response of Nano-Crystalline Cerium based Conversion Coatings on Al 2024-T3 to Chloride Environments, Shaoxin You, Philip S. Jones, Ajay Padwal, Pu Yu, Matthew O'Keefe, Thomas J. O'Keefe, and William Fahrenholtz
Submissions from 2006
An Investigation of the Causes that Lead to Burn-In/Burn-On in Heavy Section Steel Castings, Brandon L. Kruse, Von Richards, and P. D. Jackson
Chromate-Free Corrosion Protection, Matthew O'Keefe
Decreasing Electrical Energy Consumption through SiC Additions, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, John Carpenter, and Chen Wang
Improving Melting Efficiency through the Application of New Refractory Materials, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, Todd P. Sander, Jeffrey D. Smith, and Mangesh Vibhandik
Effect of Nozzle Base Material on the Rate of Clogging during the Continuous Casting of Aluminum-Killed Steels, Kent D. Peaslee, Jeffrey D. Smith, Musa Karakus, and Luis Trueba Jr.
Simulation of Nozzle Clogging during the Continuous Casting of Aluminum-Killed Steel, Kent D. Peaslee, Jeffrey D. Smith, and Luis Trueba
Simulations of a New Continuous Steelmaking Process, Jorg Annie Peter, Kent D. Peaslee, and D. G. C. Robertson
Sequestration of CO₂ from Steelmaking Offgas by Carbonate Formation with Slag, C. Hank Rawlins, Gail L. Richards, Kent D. Peaslee, and Semen Naumovich Lekakh
Steelmaking Slag as a Permanent Sequestration Sink for Carbon Dioxide, C. Hank Rawlins, Von Richards, Kent D. Peaslee, and Semen Naumovich Lekakh
Alloy Dissolution in Argon Stirred Steel, Darryl S. Webber, Kent D. Peaslee, and Von Richards
Submissions from 2005
Efficiency in Steel Melting: Opportunities and Progress, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, and Jay Triplett
Efficiency in Steel Melting: Ladle Development, Kent D. Peaslee, Semen Naumovich Lekakh, Todd P. Sander, and Jeffrey D. Smith
Experimental Study of Kinetic Processes during the Steel Treatment at Two LMF's, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, and Brian G. Thomas
Introduction of a Novel, Scrap-Based, Fully Continuous Steelmaking Process, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, Lifeng Zhang, and Brian G. Thomas
Lime-Based Plasma Spray Coatings on Steelmaking Nozzles, Jeffrey D. Smith, Kent D. Peaslee, and David C. Van Aken
Interaction of Alumina Inclusions in Steel with Calcium-Containing Materials, Robert B. Tuttle, Jeffrey D. Smith, and Kent D. Peaslee
Nickel Dissolution in Argon Stirred Steel, Darryl S. Webber, Kent D. Peaslee, and Von Richards
Foundry Size Ladle Metallurgy Vessel: Ferromanganese Dissolution, Darryl S. Webber, Von Richards, and Kent D. Peaslee
Submissions from 2004
Experimental and Theoretical Investigation of Mixing in a Bottom Gas-Stirred Ladle, Jun Aoki, Brian G. Thomas, Jörg Peter, and Kent D. Peaslee
Dimensional Accuracy and Surface Roughness of Rapid Freeze Prototyping Ice Patterns and Investment Casting Metal Parts, Qingbin Liu, Von Richards, Stephen Schmitt, and Ming-Chuan Leu
Important Factors for Effective Slag Splashing, Kent D. Peaslee and Wei Chen
Thermal Efficiency of Steel Melting, Kent D. Peaslee, Semen Naumovich Lekakh, and Bradley Randall
Review of Progress in Developing Continuous Steelmaking, Jorg Annie Peter, Kent D. Peaslee, and D. G. C. Robertson
Study of Current Steelmaking Practices to Evaluate the Viability of Continuous Steelmaking, Jorg Annie Peter, Kent D. Peaslee, and D. G. C. Robertson
Thermomechanical Processing of HSLA Wide-Flange Steel Beams for Increased Core Toughness, Jörg Peter, Kent D. Peaslee, and Dhiren Panda
Prevention of Nozzle Clogging by the Reduction of Refractory Permeability, Otto James Rajtora III, David C. Van Aken, and Jeffrey D. Smith
Spinel Formation in Coreless Induction Furnace Linings, Aryama-D. Saikia, Kent D. Peaslee, José M. Soto, and Jeffrey D. Smith
Effect of Nozzle Permeability on Clogging, Robert B. Tuttle, Kent D. Peaslee, and Jeffrey D. Smith
Technique for Evaluating Nozzle Clogging of Refractories during Continuous Casting, Robert B. Tuttle, Kent D. Peaslee, and Jeffrey D. Smith
Submissions from 2003
Thermochemistry of Steel-Refractory Interactions in Continuous Casting Nozzles, S. Ramachandran, Kent D. Peaslee, and Jeffrey D. Smith
Effect of Temperature on the Friability of Silicon Carbide in the Cupola, Aryama-D. Saikia, Von Richards, and Kent D. Peaslee
Submissions from 2002
Characterization of Cerium-Based Conversion Coatings for Corrosion Protection of Aluminum Alloys, Matthew O'Keefe, Haifeng Zhou, J. T. Grant, and William Fahrenholtz
Segmented Roll for Casting Metal Strip, James R. Sauer, Ronald J. O'Malley, and Robert S. Williams
Submissions from 2000
Spent Refractory Waste Recycling from Non-Ferrous Metals Manufacturers in Missouri, Jeffrey D. Smith and Kent D. Peaslee
Submissions from 1999
Study of Spent Refractory Waste Recycling from Metal Manufacturers in Missouri, H. Fang, Jeffrey D. Smith, and Kent D. Peaslee
Characterization and Recycling of Spent Refractory Wastes from Metal Manufacturers in Missouri, Jeffrey D. Smith, H. Fang, and Kent D. Peaslee
Submissions from 1998
Physical Modeling Studies of Major Factors Affecting Slag Splashing, Anju K. Garg and Kent D. Peaslee
Analysis of the Factors Influencing the Removal of Oil from Used Automotive Oil Filters during Recycling Operations, Darrell E. Roberts and Kent D. Peaslee
Submissions from 1997
Characterization of Used Automotive Oil Filters for Recycling, Kent D. Peaslee and Darrell E. Roberts
Strip casting with fluxing agent applied to casting roll, Robert S. Williams, Ronald J. O'Malley, and Richard C. Sussman
Submissions from 1995
The Application of Computers to Study the Effects of Jetting during Steelmaking, Kent D. Peaslee and D. G. C. Robertson
Submissions from 1994
Recycling Used Automotive Oil Filters, Kent D. Peaslee
Fluid Dynamics of Inclined Jetting on a Slag-Metal Bath, Kent D. Peaslee and D. G. C. Robertson
Model Studies of Splash, Waves, and Recirculating Flows within Steelmaking Furnaces, Kent D. Peaslee and D. G. C. Robertson
Submissions from 1993
Physical Modeling of Interactions between a Top Blown Jet and the Slag/Metal Bath in Steelmaking, Kent D. Peaslee
Physical Modeling of Metal/Slag/Gas Interactions and Reactions in Steelmaking, Kent D. Peaslee, Dhiren Panda, and D. G. C. Robertson
