Submissions from 2017
Direct Printing of Micro/Nanostructures by Femtosecond Laser Excitation of Nanocrystals, Wan Shou and Heng Pan
Transport and Interfacial Phenomena in Nanoscale Confined Laser Crystallization, Wan Shou and Heng Pan
Low-Cost Manufacturing of Bioresorbable Conductors by Evaporation-Condensation-Mediated Laser Printing and Sintering of Zn Nanoparticles, W. Shou, B. Mahajan, B. Ludwig, X. Yu, J. Staggs, Xian Huang, and Heng Pan
Stair Negotiation Made Easier using Novel Interactive Energy-Recycling Assistive Stairs, Yun Seong Song, Sehoon Ha, Hsiang Hsu, Lena H. Ting, and C. Karen Liu
Aluminum Matrix Syntactic Foam Fabricated with Additive Manufacturing, M. Spratt, Joseph William Newkirk, and K. Chandrashekhara
Homogeneous Ignition during Fuel-Rich H₂/O₂/N₂ Combustion in Platinum-Coated Channels at Elevated Pressures, Ran Sui, Et-touhami Es-sebbar, John Mantzaras, and Rolf Bombach
A Comparative Experimental and Numerical Investigation of the Heterogeneous and Homogeneous Combustion Characteristics of Fuel-Rich Methane Mixtures over Rhodium and Platinum, Ran Sui, John Mantzaras, and Rolf Bombach
Hetero-/Homogeneous Combustion of Fuel-Lean Methane/Oxygen/Nitrogen Mixtures over Rhodium at Pressures Up to 12 Bar, Ran Sui, John Mantzaras, Rolf Bombach, and Alexey Denisov
Impact of Gaseous Chemistry in H₂-O₂-N₂ Combustion over Platinum at Fuel-Lean Stoichiometries and Pressures of 1.0-3.5 Bar, Ran Sui, John Mantzaras, Et-touhami Es-Sebbar, Mohammad A. Safi, and Rolf Bombach
Klein Tunneling near the Dirac Points in Metal-Dielectric Multilayer Metamaterials, L. Sun, Jie Gao, and Xiaodong Yang
Characterization of Heat-Affected Powder Generated during Selective Laser Melting of 304L Stainless Steel Powder, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, and Joseph William Newkirk
Powder Characterization Techniques and Effects of Powder Characteristics on Part Properties in Powder-Bed based Additive Manufacturing: A Review, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, and Joseph William Newkirk
Optimization of Ultem 1010 Fused Depositon Modeling Specimens for Flexural Behavior, Gregory Taylor, Xin Wang, Leah Mason, Ming-Chuan Leu, and K. Chandrashekhara
Freeform Extrusion Fabrication of Titanium Fiber Resuborced -93 Bioactive Glass Scaffolds, Albin Thomas, Krishna C. R. Kolan, Ming-Chuan Leu, and Greg Hilmas
Freeform Extrusion Fabrication of Titanium Fiber Resuborced -93 Bioactive Glass Scaffolds, Albin Thomas, Krishna C. R. Kolan, Ming-Chuan Leu, and Greg Hilmas
Bonding of 304L Stainless Steel to Cast Iron by Selective Laser Melting, Baily Thomas, Austin T. Sutton, Ming-Chuan Leu, and Nikhil Doiphode
Toughening of Fibrous Scaffolds by Mobile Mineral Deposits, S. Thomopoulos, J. Lipner, J. J. Boyle, X. Younan, Victor Birman, and G. M. Genin
Distributed Input and State Estimation using Local Information in Heterogeneous Sensor Networks, Dzung Tran, Tansel Yucelen, Selahattin B. Sarsilmaz, and Jagannathan Sarangapani
Towards Defect Detection in Metal SLM Parts using Modal Analysis "Fingerprinting", James Urban, Nick E. Capps, Brian M. West, Troy Hartwig, Ben Brown, Robert G. Landers, Douglas A. Bristow, and Edward C. Kinzel
Investigation of the Effectiveness of Selected Shape Parameterization Techniques for Robust Aerodynamic Optimization, A. Vuruskan and Serhat Hosder
An Innovative Fuzzy Backstepping Sliding Mode Controller for a Tri-Rotor Unmanned Aerial Vehicle, Shiqian Wang, Jingjuan Zhang, Qian Zhang, and Chaoying Pei
Realizing Structural Color Generation with Aluminum Plasmonic V-Groove Metasurfaces, W. Wang, D. Rosenmann, D. Czaplewski, Xiaodong Yang, and Jie Gao
Modeling of Mass Flow Behavior of Hot Rolled Low Alloy Steel based on Combined Johnson-Cook and Zerilli-Armstrong Model, X. Wang, K. Chandrashekhara, Seth A. Rummel, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Inverse Finite Element Modeling of the Barreling Effect on Experimental Stress-Strain Curve for High Temperature Steel Compression Test, X. Wang, H. Li, K. Chandrashekhara, Seth A. Rummel, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley
Metasurface Holograms for Holographic Imaging, W. Wan, Jie Gao, and Xiaodong Yang
Modal Analysis of Metal Additive Manufactured Parts for Health Screening, B. M. West, N. E. Capps, J. S. Urban, J. Pribe, T. Hartwig, T. Lunn, B. Brown, Douglas A. Bristow, Robert G. Landers, and Edward C. Kinzel
Linking Internal Dissipation Mechanisms to the Effective Complex Viscoelastic Moduli of Ferroelectrics, Charles Wojnar and D. M. Kochmann
High Dimensional Model Representation for Hybrid Reliability Analysis with Dependent Interval Variables Constrained within Ellipsoids, S. Xie, B. Pan, and Xiaoping Du
Structural Responses of Metallic Glasses under Neutron Irradiation, L. Yang, H. Y. Li, P. W. Wang, S. Wu, G. Guo, B. Liao, Q. L. Guo, X. Q. Fan, P. Huang, H. B. Lou, F. M. Guo, Q. Zeng, T. Sun, Y. Ren, and Lianyi Chen
A Passive Intermodulation Source Identification Measurement System using a Vibration Modulation Method, Sen Yang, Wei Wu, Shuai Xu, Yaojiang Zhang, Daniel S. Stutts, and David Pommerenke
Fabrication of Functionally Graded Ti and γ-TiAl by Laser Metal Deposition, Lei Yan, Xueyang Chen, Yunlu Zhang, Joseph William Newkirk, and Frank W. Liou
Investigation of Build Strategies for A Hybrid Manufacturing Process Progress on Ti-6Al-4V, Lei Yan, Leon Hill, Frank W. Liou, and Joseph William Newkirk
Simulation of Cooling Rate Effects on Ti-48Al-2Cr-2Nb Crack Formation in Direct Laser Deposition, Lei Yan, Wei Li, Xueyang Chen, Yunlu Zhang, Joseph William Newkirk, Frank W. Liou, and David Dietrich
Natural Convection in Redox Electrochemistry: Model, Simulation and Experiments, Fangping Yuan and Kakkattukuzhy M. Isaac (Presentation)
Modelling Translating Tornado-Like Wind Flow using CFD Simulations, Fangping Yuan, Guirong Grace Yan, Ryan Honerkamp, and Kakkattukuzhy M. Isaac
A Study of MHD-Based Chaotic Advection to Enhance Mixing in Microfluidics using Transient Three Dimensional CFD Simulations, F. Yuan and Kakkattukuzhy M. Isaac
Distributed Control of Active-Passive Networked Multiagent Systems, Tansel Yucelen and J. D. Peterson
Direct Aerosol Printing of Lithium-Ion Batteries, X. Yu, I. Chen, S. Sarkar, Jonghyun Park, Heng Pan, Y. Liu, Y. Wang, and W. Everhart
Spiraling Light with Magnetic Metamaterial Quarter-Wave Turbines, J. Zeng, T. S. Luk, Jie Gao, and Xiaodong Yang
Structured Light Generation by Magnetic Metamaterial Half-Wave Plates at Visible Wavelength, J. Zeng, T. S. Luk, Jie Gao, and Xiaodong Yang
Effect of Wall Cooling on Boundary-Layer-Induced Pressure Fluctuations at Mach 6, C. Zhang, Lian Duan, and M. Choudhari
A Two-Dimensional Simulation of Grain Structure Growth within Substrate and Fusion Zone during Direct Metal Deposition, Jingwei Zhang, Wei Li, Frank W. Liou, and Joseph William Newkirk
Metallic Components Repair Strategies using the Hybrid Manufacturing Process, Xinchang Zhang, Wenyuan Cui, Wei Li, and Frank W. Liou
Magnetic Separation of Microparticles by Shape, R. Zhou, F. Bai, and Cheng Wang
Magnetic Control of Lateral Migration of Ellipsoidal Microparticles in Microscale Flows, R. Zhou, C. A. Sobecki, J. Zhang, Yanzhi Zhang, and Cheng Wang
Submissions from 2016
Exergy-based performance analysis of a turbojet engine, Mohammad Abbas and David W. Riggins
Effect of Drilling Fluid Hydraulics on Drill Stem Vibrations, Mohammed F. Al Dushaishi, Runar Nygaard, and Daniel S. Stutts
Processing and Performance of Out-of-Autoclave Bismaleimide Composite Sandwich Structures, Sudharshan Anandan, G. S. Dhaliwal, K. Chandrashekhara, T. R. Berkel, and D. Pfitzinger
Progressive Damage Modeling of Sandwich Composites under Edgewise Compression, Sudharshan Anandan, Gurjot S. Dhaliwal, K. Chandrashekhara, T. R. Berkel, and J. Castle
Influence of Cure Conditions on Out-of-Autoclave Bismaleimide Composite Laminates, Sudharshan Anandan, Gurjot S. Dhaliwal, V. A. Samaranayake, K. Chandrashekhara, Thomas R. Berkel, and Doug Pfitzinger
Continuum and Molecular-Dynamics Simulation of Nanodroplet Collisions, Raunak Bardia, Zhi Liang, Pawel Keblinski, and Mario F. Trujillo
Examining the Impacts of Portable Changeable Message Signs on Drivers' Speed Characteristics: A Driving Simulator Study, Ghulam H. Baum, Ming-Chuan Leu, and Bharath Venkat
Microstructure Image-Based Modeling of Fracture in Continuous Fiber-Reinforced Ceramic Matrix Composites, V. Bheemreddy, K. Chandrashekhara, Lokeswarappa R. Dharani, and Greg Hilmas
Computational Study of Micromechanical Damage Behavior in Continuous Fiber-Resuborced Ceramic Composites, Venkata P. Bheemreddy, K. Chandrashekhara, Lokeswarappa R. Dharani, and Greg Hilmas
Modeling and Simulation of Cure Kinetics and Flow in Cavity-Molded Composites, V. Bheemreddy, Z. Huo, K. Chandrashekhara, and R. A. Brack
An Inertial Dual-State State Estimator for Precision Planetary Landing with Hazard Detection and Avoidance, Robert H. Bishop, Timothy P. Crain, Chad Hanak, Kyle J. DeMars, John M. Carson, Nikolas Trawny, and John Christiank
Energy-Efficient Active Reflectors with Improved Mechanical Stability and Improved Thermal Performance, Samuel Case Bradford, Douglas C. Hofmann, Scott N. Roberts, John B. Steeves, Charles S. Wojnar, and Dennis M. Kochmann
Uncertainty Analysis of Fluid-Structure Interaction of a Deformable Hypersonic Inflatable Aerodynamic Decelerator, Andrew J. Brune, Serhat Hosder, and Karl T. Edquist
Thermal Protection System Response Uncertainty of a Hypersonic Inflatable Aerodynamic Decelerator, Andrew J. Brune, Serhat Hosder, Karl T. Edquist, and Steven A. Tobin
Uncertainty Analysis of Thermal Protection System Response of a Hypersonic Inatable Aerodynamic Decelerator, Andrew J. Brune, Serhat Hosder, Karl T. Edquist, and Steven A. Tobin
Phase Control in Immiscible Zn-Bi Alloy by Tungsten Nanoparticles, C. Cao, Lianyi Chen, J. Xu, J. Z. Zhao, M. Pozuelo, and X. C. Li
Strengthening Al-Bi-TiC₀.₇N₀.₃ Nanocomposites by Cu Addition and Grain Refinement, Chezheng Cao, Lianyi Chen, Jiaquan Xu, Hongseok Choi, and Xiaochun Li
Reduction of System Reliability Model Uncertainty by Considering Dependent Components with Stochastic Process Loading, Yao Cheng and Xiaoping Du
System Reliability Analysis with Dependent Component Failures during Early Design Stage -- A Feasibility Study, Yao Cheng and Xiaoping Du
Effect of Powder Particle Size on the Fabrication of Ti-6Al-4V using Laser Metal Deposition from Elemental Powder Mixture, Xueyang Chen, Lei Yan, Wei Li, Frank W. Liou, and Joseph William Newkirk
Effect of Powder Particle Size on the Fabrication of Ti-6Al-4V using Laser Metal Deposition from Elemental Powder Mixture, Xueyang Chen, Lei Yan, Wei Li, Frank W. Liou, and Joseph William Newkirk
Experimental and Numerical Investigations of Dust Effects on Surface Charging in Plasma, Kevin Chou, Daoru Frank Han, and Joseph J. Wang
Approach-Phase Precision Landing with Hazard Relative Navigation: Terrestrial Test Campaign Results of the Morpheus/Alhat Project, Timothy P. Crain, Robert H. Bishop, John M. Carson, Nikolas Trawny, Chad Hanak, Jacob J. Sullivan, John Christiank, Kyle J. DeMars, Tom Campbell, and Joel Getchiusyy
Analysis of the Gauss-Bingham Distribution for Attitude Uncertainty Propagation, Jacob E. Darling and Kyle J. DeMars
Minimization of the Kullback-Leibler Divergence for Nonlinear Estimation, Jacob E. Darling and Kyle J. DeMars
The Bingham-Gauss Mixture Filter for Pose Estimation, Jacob E. Darling and Kyle J. DeMars
Uncertainty Propagation of Correlated Quaternion and Euclidean States using Partially-Conditioned Gaussian Mixtures, Jacob E. Darling and Kyle J. DeMars
Uncertainty Propagation of Correlated Quaternion and Euclidean States using the Gauss-Bingham Density, Jacob E. Darling and Kyle J. DeMars
Recursive Filtering of Star Tracker Data, Jacob E. Darling, Nathan Houtz, Carolin Frueh, and Kyle J. DeMars
Development and Flight of a Stereoscopic Imager for Use in Spacecraft Close Proximity Operations, Jacob E. Darling, Keith A. Legrand, Pavel Galchenko, Henry J. Pernicka, Kyle J. DeMars, Alexander T. Shirley, James S. McCabe, Christine L. Schmid, Samuel J. Haberberger, and Alex J. Mundahl
Fabrication and Testing of Soy-Based Polyurethane Foam, Gurjot S. Dhaliwal, Sudharshan Anandan, K. Chandrashekhara, N. Dudenhoeffer, and Paul Ki-souk Nam
Resonant Effects in Nanoscale Bowtie Apertures, L. Ding, J. Qin, S. Guo, T. Liu, Edward C. Kinzel, and L. Wang
Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining, Xiangyang Dong and Yung C. Shin
Multiscale Genome Modeling for Predicting the Thermal Conductivity of Silicon Carbide Ceramics, Xiangyang Dong and Yung C. Shin
Multiscale Modeling for Predicting the Mechanical Properties of Silicon Carbide Ceramics, Xiangyang Dong and Yung C. Shin
Pressure Fluctuations Induced By a Hypersonic Turbulent Boundary Layer, Lian Duan, Meelan M. Choudhari, and Chao Zhang
Response of Real-Time Black Carbon Mass Instruments to Mini-Cast Soot, Lukas Durdina, Prem Lobo, Max B. Trueblood, Elizabeth A. Black, Steven Achterberg, Donald E. Hagen, Benjamin T. Brem, and Jing Wang
Uncertainty Topics for Engineering Design Courses, Xiaoping Du
Broadband Noise Suppression for Turbofan Inlet Applications, Walter Eversman
Development of an Educational Small-Scale Hybrid Electric Vehicle (HEV) Setup, Poria Fajri, Mehdi Ferdowsi, Nima Lotfi, and Robert G. Landers
A Realistic Driving Profile Optimization for Electric Vehicles, H. Farhangi, Dincer Konur, W. Saz, and Ümit Özgür Köylü
Investigation of Forged-Like Microstructure Produced by a Hybrid Manufacturing Process, Romy Francis, Joseph William Newkirk, and Frank W. Liou
Automatic Detection of Depth of Cut during End Milling Operation using Acoustic Emission Sensor, Haythem Gaja and Frank W. Liou
Laser Line Scan Characterization of Geometric Profiles in Laser Metal Deposition, Michelle L. Gegel, A. Nisbett, Douglas A. Bristow, and Robert G. Landers
Proposed Hybrid Processes for Part Building using Fusion Welding and Friction Stir Processing, Megan A. Gegesky, Frank W. Liou, and Joseph William Newkirk
A Novel Extrusion-Based Additive Manufacturing Process for Ceramic Parts, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, and Greg Hilmas
Novel Extrusion-Based Additive Manufacturing Process for Ceramic Parts, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, and Greg Hilmas
Freeform Extrusion Fabrication of Advanced Ceramic Components with Embedded Sapphire Optical Fiber Sensors, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Jeremy Lee Watts, Yiyang Zhuang, and Jie Huang
Advanced Ceramic Components with Embedded Sapphire Optical Fiber Sensors for High Temperature Applications, Amir Ghazanfari, Wenbin Li, Ming-Chuan Leu, Yiyang Zhuang, and Jie Huang
Spacecraft Navigation Using a Robust Multi-Sensor Fault Detection Scheme, Samuel J. Haberberger and Kyle J. DeMars
A Nonhomogeneous Immersed-Finite-Element Particle-in-Cell Method for Modeling Dielectric Surface Charging in Plasmas, Daoru Frank Han, Joseph Wang, and Xiaoming He
A 3D Immersed Finite Element Method with Non-Homogeneous Interface Flux Jump for Applications in Particle-In-Cell Simulations of Plasma-Lunar Surface Interactions, Daoru Frank Han, Pu Wang, Xiaoming He, Tao Lin, and Joseph Wang
Selective Laser Sintering of Low Density, Low Coefficient of Thermal Expansion Silica Parts, John M. Hostetler, Jonathan T. Goldstein, Augustine M. Urbas, Rodrigo E. Gutierrez, Theresa E. Bender, Charles S. Wojnar, and Edward C. Kinzel
Turbulent Inflow Generation for Direct Simulations of Hypersonic Turbulent Boundary Layers and Their Freestream Acoustic Radiation, J. Huang, C. Zhang, and Lian Duan
A Comprehensive Model of the Transport Phenomena in Gas Metal Arc Welding, Junling Hu, Zhenghua Rao, and Hai-Lung Tsai
