Materials Science and Engineering Masters Theses
Theses from 1968
Corrosion rates and electrokinetics of cobalt and cobalt-rich cobalt-iron alloys in sulfuric and hydrochloric acids, Cheng Tzong Horng
The effect of prior cold work on the pressure welding of ferritic nodular iron, Ronald Morris Ledbetter
Kinetics of the formation of strontium zirconate, W. H. Parker
Pressure welding of continuously cast nodular iron, Gerald W. Wille
The inert gas effect on the rate of evaporation of zinc and cadmium, Chu Sheng Wu
Isotope effect of interstitial diffusion of carbon in a dilute Fe-Si alloy, Edward T. Yen
Theses from 1967
Compressive creep of high alumina refractories, Vernon Lee Burdick
Vapor pressure and evaporation coefficient of cadmium oxide, R. Tom Coyle Jr.
A comparison of strength properties of heat treated AISI 1065 steels at high strength levels, Robert Lowell Hollenbeck
Relationships among the metallurgical condition, hardness, and the electrical conductivity of aluminum alloys, Richard A. Mueller
Lattice constants, thermal expansion coefficients, densities, and imperfections in gold and the alpha-phase of the gold-indium system, Vinayak Keshavlal Patel
A determination of the rate of evaporation of zinc at atmospheric pressure., Yu Ming Su
Relationship of feldspar properties to surface and volume defects in porcelains, Macy Wiiliam Vance
A transmission electron microscopy study of some high strength plain carbon steels, George Joseph Vytanovych
Theses from 1966
A study of high strength, heat treated plain carbon steels, Ing Shing Chien
The thermodynamics of the ZnO-Fe₂O₃-Fe₃O₄ system, Dennis George Dreyer
Tensile strength of prereacted porcelain compositions, Chester Lee Hill
Synthesis and structural determination of intermetallic compounds in the Fe-Ho system, Gerald J. Roe
A study of the effect of magnetite additions to shell molds on the surface quality of low carbon steel castings, Robert C. Tooke
Theses from 1965
The elastic and anelastic constants of a synthetic fluor-mica formed by glass-ceramic fabrication techniques, John H. Ainsworth
The effect of varying sea coal fineness on sea coal activity in molding sands, Laurence A. Cooley
The effect of copper upon the eutectoid reaction in the zinc-aluminum system, Paul Theodore Corcoran
Anodic dissolution and disintegration of tin and valency of the tin ions going into solution, Mrityunjoy Dutta
A study of hot shortness in steels, Koang-Hwa Kung
A study of the structural rearrangements accompanying room temperature recovery of high purity aluminum, Carlos Manuel Lago
Detection of stress corrosion cracking in u-bend brass specimens by an electro-mechanical method, Floyd Elwin Loftin
A feasibility study of the Haeffner effect in mercury, Paul Martin Machmeier
A study of the photomechanical effect in silicon, Ronald M. Oglesbee
The effect of small alloy additions on the quench induced texture of alpha uranium, Kenneth Ray Riggs
The dielectric properties of a synthetic fluor-mica formed by glass-ceramic fabrication techniques, Ray Fred Schumacher
Solid solubility of sulfur, selenium, and tellurium in molybdenum at 1100°C, lattice constants thermal expansion coefficients, and densities of molybdenum and the molybdenum-base alloys, Ramesh Purushottamdas Shodhan
Order-disorder in Fe₃Al at various temperatures induced by neutron irradiation, Robert F. Toma Jr.
A study of sulfide inclusions in medium carbon steels, Shane Shiang Yen
Theses from 1964
Study of the temperature dependence of the Haeffner effect in mercury, Charles George Arnold
A study of the crystallographic orientation dependence of electrical resistivity in zinc, Paul Frederic Becher
The effect of cation size of xanthate collectors in sulphide flotation., R. W. Bourne
Solid solubility of sodium oxide in tricalcium aluminate, Joel A. Conwicke
The effects of surface flaw density and configuration on fracture stresses of a triaxial porcelain., William H. Daniels
Investigation of inoculant effect on cast iron, Darrell W. Donis
The effect of moisture content on the action of sea coal in molding sands., Robert J. Endres
The imperfect structure of Ti-, Zr-, and Hf- nitrides containing an excess of nitrogen., Chester A. Faunce
Anodic dissolution and disintegration of indium, thallium, and indium-cadmium solid solutions and valency of the ions going into solution., Richard Lloyd Martin
Densification studies of three-component refractory grog systems., Jerome Dale Patterson
The anodic dissolution and disintegration of gallium and aluminum and the initial valency of the ions entering aqueous solutions., Kenneth Anderson Poush
A preliminary study of the controlled crystallization of a bottle glass., Narayan M. Sedalia
Zirconium chloride nuclear battery, Lonnie J. Shalton
A study of crystallization of synthetic fluor-glaucophane compositions, Kartini Tjokroatmodjo
Development of a fluor-mica dielectric using glass-ceramic fabrication methods., James Joseph Tuzzeo
Microscopic observations on etched surfaces of zinc single crystals and on anodic disintegration., Yun Wang
Influence of quartz particle size and concentration on the fracture stresses of triaxial alumina porcelain., John David Weyand
Properties and perfection of Zr-H solid solutions at room temperature., Dirk Heinrich Wiebe
Sonic flow meter., Daniel E. Wilson
Theses from 1963
Liquid mercury embrittlement of thin-walled 2024 aluminum tubes, Edward J. Beckemeyer
A study of the solubility of gold in aluminum and the extent of the Al₂Au phase., Kuldip Singh Chopra
A dilatometric study of the martensite transformation and maraging behavior of a Ni- Co- Mo steel, Neal Matthias Griesenauer
Zinc sulfide-sulfate reaction pressures, William L. Hallerberg
A study of a method for determining properties of metals at high strain rates., Warren Heidbreder
Phase extent of GaAs, GaSb, and InSb, and solid solubility in the system GaAs-GaSb determined by the lattice constant-density method., Chang Don Kim
An equilibrium study of the system Bi-S-H₂, Don Hie Lee
Determination of the standard free energy of formation of Zr₃S₂, Peter E. Otten
Preliminary investigation of acid treatment for the stabilization of doloma, Deward Pan
A new method of making stainless steel powder by electrochemical disintegration, Mohammed Maher Saad
A thermodynamic study of the molybdenum-sulfur system at 1100⁰C, Seth C. Schaefer
A preliminary study of the dielectric properties of bismuth ferrate ceramics., John Joseph Schwaller
An electrolytic polishing and recrystallization study of zinc and zinc alloys., Roy Ashley Smith
Influence of porosity on the fracture stresses of electrical porcelain., Edward Anton Snajdr
Dissolution rates of zone refined iron and steel in hydrochloric and sulfuric acids and in sodium chloride solutions., Gary E. Welch
A study of the relative electric resistance of commercial steels and pure iron, William Eugene Wistehuff
Theses from 1962
A weight loss technique for the determination of phase boundaries, Robert Lee Benner
A study of segregation in cast aluminum-uranium alloys, B. L. Bramfitt
The effect of the rolling load on the micro-structure of low carbon sheet steel, Jerry Lee Cadden
A study of several commercial steels in the red short range, Jorge Alberto Espana
A study of the chemical kinetics, activation energy and difference effect on beryllium dissolving in mineral acids, Daniel Santhamurthi Gnanamuthu
Preliminary investigation of the effects of seeding fusion cast refractories, Thomas Spencer Montgomery
A preliminary study of the effect of heat treatment on the strength and microstructure of a glass-ceramic material, P. D. Ownby
Electrodeposition of antimony from sulfide melts, Mahendra N. Rana
A determination of vapor pressure of barium in the thermal production of barium metal, Thomas A. Theobald
A survey of the influence of selected sulfides on the thermal decomposition rate of zinc sulfate, L. G. Twidwell
A study of the recrystallization and polygonization of high purity aluminum, Robert Leon Wright
Theses from 1961
The effects of sulphur and copper on hot-workability of pure iron, Hung-Chi Chao
A study of the difference effects on alpha solid solutions of oxygen in titanium dissolving in hydrofluoric acid, Kuo-Chin Chuang
A vacuum induction furnace for pyrometric cone equivalent determinations, Robert E. Farris
A resistivity study of hot short ferrous alloys, Harold Alfred Koelling
A preferred orientation study of sheet formed by rolling copper, nickel, titanium and tungsten metal powders, Martin Franklin Marchbanks
A dissolution rate study of beryllium in hydrofluoric acid, Donald Lee Mathis
Electron microscope study of the systems cadmium-cadmium chloride and lead-lead chloride, Dennis O'Neill
Isothermal decomposition of austenite (in 1.4% tungsten steel) at subcritical temperatures, Samir Moustafa Riad
A parametric and microscopic study of the solid solubility of gold in aluminum, Claude Lowell Woodard
Theses from 1960
Imperfections in a silicon crystal studied by the x-ray and density method, Pierre Borgeaud
The constitution of magnesium-rich magnesium-zirconium alloys, Kenneth Allen Fowler
High temperature oxidation of nickel, Virgil R. Friebel
A thermodynamic study of the system PbO-PbS, John P. Hager
A thermodynamic study of the germanium sulphides, Satya Prakash Jain
A thermodynamic study of germanium sulfides, Sham Lal Malhotra
The effect of the rare earth elements on the hot workability of ingot iron, L. A. Neumeier
Preparation of casting slips containing ferrous powders and alginates, Robert Eugene Newcomer
A dissolution rate study in hydrofluoric acid of titanium and the alpha solid solutions of oxygen in titanium, John L. Ratliff
Segregation method as possible process to beneficiate oxidized lead ores, Jose Molfino Tomasio
Theses from 1959
The effect of heating chill cast eutectics, Robert Lewis Dreshfield
