Materials Science and Engineering Masters Theses

 

Follow


Theses from 1977

The effect of antimony, chloride ion, and glue on copper electrorefining., Lindell Robert Hurst Jr.

High pressure steam-co corrosion of high alumina castables., Kenneth William Wistrom

Theses from 1976

Formation of secondary graphite during the heat treatment of nodular cast iron weldments., Mehmet Nuri Birer

An investigation of aluminum oxychloride and zirconium phosphate as refactory binders., Ladawan Boonsermsuwong

The solubility of lead in iron sulfide and oxysulfide mattes at 1000⁰C and 1200⁰C., Vinary Damodar Chaskar

The effect of alloying additions on the formation of secondary graphite in quenched and tempered nodular cast iron., Felipe A. Farinez

Alkali ion diffusion in lithium alumino-silicate glasses., Charles Lee Schlef

Lattice activated interstitial diffusion in a pseudo-linear lattice., Arun B. Shah

Theses from 1975

PDF

Characterization of two Mexican raw dolomites for refractory brick production, Rodolfo Trevino Cantu

Electroless and chemical metal deposition on human tooth enamel., Richard Doyle Christie

PDF

Variables affecting the rate of solution of mold inoculants in cast iron, Jose Osorno Fonnegra

Stability of refractory castables to steam-N2 and steam-co atmospheres., Frank David Gac

The influence of oxygen activity on sintering of strontium doped lanthanum chromite., Leslie Groupp

Ionic thermal current in sodium-rubidium silicate glasses., Chi-Ming Hong

The effect of collagen and chloride additions on electrolytic copper deposits., William P. Lorenz

Hydrogen embrittlement of PH13-8Mo stainless steel., Dale R. McIntyre

Phase equilibria near the solidus temperature for iron-rich Fe-Cu-C alloys., Kenneth L. Metz Jr.

Effect of temperature, aging, and composition on phase development in the system Al₂O₃-P₂O₅-H₂0., John Allan Middleton

The spheriodization of tool steels., Siri Ram Rai

Theses from 1974

PDF

A study of the feasibility in obtaining the kinetics of various ordering phenomena of the iron aluminum system utilizing the Mössbauer effect, Lloyd Rollan Chapman

Effect of nodule count and cooling rate on the matrix of nodular iron., Subrata Sen Gupta

Kiss gating in sand-cast aluminum alloys., Michael Lynn Holt

Amine flotation of feldspar from magnetite concentrate., Gary William Hudiburgh Jr.

Detection of impurities in zinc sulfate electrolytes by cyclic voltammetry techniques., Bruce Alan Lamping

PDF

Magnetostrictive aftereffects in a dilute 50Fe-50Ni-C alloy, Raj N. Master

ESCA characterization of flotation products from a lead-zinc-copper concentrator on the new lead belt of Southeast Missouri., Kevin Leroy Purdy

PDF

Effect of dissolved water on physical properties of silver borate glasses, E Richard Reynolds

PDF

Synthesis of fused silica by flame hydrolysis, James Edward Rourke

PDF

Determination of oxygen chemical diffusion coefficients in single crystal strontium titanate by capacitance manometry, Douglas Bugh Schwarz

Theses from 1973

PDF

Characterization of a Mexican halloysitic clay and behavior in dry pressing, Jesus L. Derat

PDF

A new and direct process for the reduction of lead sulfide, Rolando Oscar Fernandez

PDF

Precipitation of carbon from martensite in ductile iron, Devendra Ratilal Majmundar

PDF

Sintering and microstructure control of a ferrimagnetic Mn-Zn ferrite spinel, Joel Keith Michel

PDF

The effect of gating on soundness of Al-alloy permanent mold castings, Dinesh Shantilal Patel

PDF

The effect of porosity on strength degradation in thermally shocked alumina, Russell David Smith

Theses from 1972

PDF

A mass spectrometric characterization of positive ions created in simple vacuum diodes incorporating oxide cathodes with supplementary analysis of background gases, Larry A. Addington

PDF

Polynary silicon tellurium glasses, Henry Edward Anthonis

PDF

Equilibria between MoO₂ and liquid molybdenum oxide, Prakash Bakhru

PDF

A tensi-volumetric apparatus: theory, calibration, and use in an investigation of the oxygen non-stoichiometry of pure BaTiO₃, Glenn Jon Conger

PDF

Concentration by sorting : Feasibility determination by radial distribution analysis, Robert M. Doerr

PDF

Thermal expansion of nickel and iron, and the influence of nitrogen on the lattice parameter of iron at the Curie temperature, Jinn-Wen Hwang

PDF

The electric field strength dependence of neutron-induced defects in silicon P-N junctions, Paul Edward Johnson

PDF

Mechanism of UAL₃ to UAL₄ transformation, Ling Ping Lee

PDF

The morphology of the cellular precipitation reaction in a Pb-3.0 wt% Sn alloy, Federico Sequeda Osorio

PDF

A study of the system lithia - silica, Roy Richard Ramey

PDF

An investigation of stage I fatigue crack growth in FCC, BCC, and HCP metals, Marion Anthony Russo

PDF

Phase transformations in the system ZrO₂-CaO, Damri Sukhotanang

Theses from 1971

PDF

Mechanical properties of low carbon martensite, Allen L. Affolter

PDF

The effect of 15% MnO on the phase relations in the system CaO-FeO-SiO₂ at 1450ºC, Aquil Ahmad

PDF

Factors affecting the ductility and microstructure of Ti-6Al-6V-2Sn titanium alloy weldments, Michael John Ball

PDF

Alkali mobility and mechanical relaxation in mixed-alkali silicate glasses, James W. Fleming Jr.

PDF

Electrolytic reduction of zinc from acidic sulfate solutions, Kenneth Dale Gielow

PDF

Evaluation of a cation isotopic substitution technique in conjunction with a high temperature gas pycnometer for determining the stoichiometry of materials, Michael Clair Graves

PDF

Quenching defects in aluminum plus ten atomic per cent zinc, James Thomas Grider

PDF

Final sintering of Cr₂O₃ with minor additions of MgO and sintering of MgO with minor additions of Cr₂O₃, Gordon E. Jungquist

PDF

Phase equilibrium and thermodynamic study of lime-iron oxide solid solutions, Shin Suk Kang

PDF

A study of the dislocation instability and reverse martensitic transformation in FE-NI system, Chung Lim

PDF

A study of the void-strengthening of aluminum and its nature, Purushottam G. Manusmare

PDF

Phase equilibrium and thermodynamic study of the iron-copper-carbon system, Krishna Parameswaran

PDF

The effect of cathodic protection on the stress corrosion characteristics of 300M low alloy steel, John Pechonick

PDF

High temperature compressive creep in mullite, Peter C. Smith

PDF

Evaporation and condensation of zinc, Shailesh Bhanuprasad Vora

PDF

The Pm3m-Fm3m transformation and phase equilibrium in solid solutions of CsC1 with KC1, RbC1, and CsBr, John David Weyand

Theses from 1970

PDF

The smelting of lead drosses, Humberto Adolfo Arzabe

PDF

Cathodic behavior of Co, Co-Fe alloys and some other metals in acids in a cathodic protection arrangement, Ram Bajaj

PDF

Spheroidization in tool steels, Sharad Gajanan Bankar

PDF

Metallographic study of phase changes in heat treated ductile iron, Mahendra Vadilal Desai

PDF

Investigations of several variables in the Dwight-Lloyd McWane ironmaking process, James Orlan Hood Jr.

PDF

Fracture surface energy determinations of high density polycrystalline ceramics, Gene Arthur Pahlmann

PDF

A systematic study of instrument variables upon the accuracy of microprobe analysis, R. A. Parr

PDF

Investigation of the system Al₂O₃-TeO₂-O₂, Vera Zelenkova Sestak

PDF

Imperfections in the Ag-In system (alpha-phase) and lattice parameters of cadmium oxide, Prafulla Maganlal Vora

Theses from 1969

PDF

Anodic oxidation of pure and D.S. (dispersion hardened) lead in sulfuric acid solutions, Rafael San Martin Aldazabal

PDF

Thermal-fatigue of type 304 stainless steel, Gajinder Bir Singh Arora

PDF

The electrodeposition of zinc; changes in current efficiency and surface structure resulting from various addition agents, Haruhisa Fukubayashi

PDF

Establishment of a torsion pendulum and its evaluation, Ashwin Kantilal Ghatalia

PDF

Precipitation hardening of a Mg - 3.5 wt. % Th - 1. wt. % Mn alloy, Adolf Chun-Chiung Huang

PDF

The effect of small additions of niobium upon the corrosion rates and electrochemical potentials of iron in HCl, HF, and H₂SO₄, Richard Lee Jones

PDF

Effect of hydrostatic pressure on anelastic stress relaxation in a mixed-alkali silicate glass, Young-Gil (Gilbert Y.) Kim

PDF

A continuous method for determination of the evaporation rate of zinc, Paul Alan O'Neill

PDF

Thermal fatigue testing of die casting die steels, Kulwant Singh Sabharwal

PDF

The effect of aging on the exfoliation corrosion characteristics of 7178 aluminum alloy, J. James Slavick

PDF

The effect of thermal-mechanical processing of the exfoliation corrosion resistance of an aluminum-zinc-magnesium-copper alloy, James Lawrence Spehr

PDF

Internal friction of phase separated glasses, Scot Walter Taylor

Theses from 1968

PDF

A mechanical metallurgical method of predicting the springback tendencies of a bent metal strip, Jerrold Myles Alyea

PDF

Influence of nobler metal salt additions upon the dissolution rate of aluminum in hydrofluoric acid, Barry L. Basden

PDF

Compressive creep of basic refractories, Maurice E. Green

PDF

Corrosion rates and electrokinetics of cobalt and cobalt-rich cobalt-iron alloys in sulfuric and hydrochloric acids, Cheng Tzong Horng

PDF

The effect of prior cold work on the pressure welding of ferritic nodular iron, Ronald Morris Ledbetter

PDF

Kinetics of the formation of strontium zirconate, W. H. Parker

PDF

Pressure welding of continuously cast nodular iron, Gerald W. Wille

PDF

The inert gas effect on the rate of evaporation of zinc and cadmium, Chu Sheng Wu

PDF

Isotope effect of interstitial diffusion of carbon in a dilute Fe-Si alloy, Edward T. Yen

PDF

Lattice parameters, coefficients of thermal expansion, densities, and lattice perfection of the copper-indium primary solid solutions, Lin Sheng Yu

Theses from 1967

PDF

Compressive creep of high alumina refractories, Vernon Lee Burdick

PDF

Vapor pressure and evaporation coefficient of cadmium oxide, R. Tom Coyle Jr.

PDF

A comparison of strength properties of heat treated AISI 1065 steels at high strength levels, Robert Lowell Hollenbeck

PDF

Relationships among the metallurgical condition, hardness, and the electrical conductivity of aluminum alloys, Richard A. Mueller

PDF

Lattice constants, thermal expansion coefficients, densities, and imperfections in gold and the alpha-phase of the gold-indium system, Vinayak Keshavlal Patel

PDF

A determination of the rate of evaporation of zinc at atmospheric pressure., Yu Ming Su