Masters Theses
Abstract
"Measurements of evaporation rates of zinc in three different residual gases, e.g., argon, carbon monoxide, and hydrogen at one atmosphere pressure, were made. It was found that the rate of evaporation of zinc in one atmosphere of argon was almost the same as that in carbon monoxide, while the rate in hydrogen was almost twice the rate in argon or carbon monoxide. Measurements of evaporation rate of zinc in one atmosphere of argon-oxygen mixtures were also made. The evaporation rate was considerably reduced because the formation of the oxide film retards the zinc vapor escaping from the evaporating surface"--Abstract, page iii.
Advisor(s)
O'Keefe, T. J. (Thomas J.)
Committee Member(s)
Vaughn, George E., Jr., 1925-1997
Park, Efton
Kisslinger, Fred, 1919-2010
Department(s)
Materials Science and Engineering
Degree Name
M.S. in Metallurgical Engineering
Sponsor(s)
Blackwell Zinc Company
Publisher
University of Missouri at Rolla
Publication Date
1967
Pagination
vi, 64 pages
Note about bibliography
Includes bibliographical references (pages 40-42).
Rights
© 1967 Yu Ming Su, All rights reserved.
Document Type
Thesis - Open Access
File Type
text
Language
English
Subject Headings
Evalporation -- MeasurementEvaporationZinc -- Metallurgy
Thesis Number
T 2035
Print OCLC #
5988060
Electronic OCLC #
781863849
Recommended Citation
Su, Yu Ming, "A determination of the rate of evaporation of zinc at atmospheric pressure." (1967). Masters Theses. 5141.
https://scholarsmine.mst.edu/masters_theses/5141