The Faculty Research & Creative Works series collects scholarly and creative work by Missouri S&T's faculty and professional staff. To find works from a specific department, center, or program, browse by Programs, Centers, and Departments. To browse content in this series by author, use the link below:
Browse by Faculty AuthorSubmissions from 1995
Periodicity And Indecomposability, William Thomas Ingram
Point-Valued Mappings of Sets, Matt Insall
Impact-Parameter Dependent L-K Vacancy-Transfer in Collisions of Ni²³⁺ with Ge Solid Targets, Martin Jager, Michael Schulz, T. Kandler, A. Warczak, Harald Brauning, A. Demian, Mark Damrau, A. El-Sadek, Kristian Freitag, Joachim Hermann Ullrich, and Horst Schmidt-Bocking
Converting Laserdisc Video to Digital Video: A Demonstration Project using Brain Animations, Chiang S. Jao, Daniel B. Hier, and Steven U. Brint
Aerodynamic Investigation of Wing Tip Sails, J. B. Jarvis and B. P. Selberg
Measurement of Solids in Coal Slurry Lines with an Impedance Cell Technique, B. Jensen, Stewart Gillies, G. J. Tuck, and B. K. Abraham
A Knowledge-Based Decision Support System for Locating a Manufacturing Facility, Chamnong Jungthirapanich and Colin Othniel Benjamin
Animated Simulation of Robot Process Capability, Ali K. Kamrani, Henry Allen Wiebe, and Chiu Chi Wei
Diffusion in Inhomogeneous Polymer Membranes, Sameer Suresh Kasargod, Farhad Adib, and Partho Neogi
Resonant Neutron Scattering from YBa₂Cu₃O₇, Bernhard Keimer, Hungfai Fong, Dmitry V. Reznik, Fatih Dogan, and Ilhan A. Aksay
System Modeling and Control of Smart Structures, Frank J. Kern, Leslie Robert Koval, K. Chandrashekhara, and Vittal S. Rao
Polymeric Composite Tube Fabrication, Byung Sun Kim and T. F. Lehnhoff
Stresses Induced in Fiber-Reinforced Tubes Due to Changes in Temperature and Moisture, Byung Sun Kim and T. F. Lehnhoff
On-Line Cursive Korean Character Recognition by using Curvature Models, Chang-Soo Kim, Byung Hwan Jun, Moo Young Kim, Woo Seong Kim, and Jaihie Kim
A New Approch to Low Drift Ta₂O₅ by pH Reactive Sputtering and Sol-Gel Method, Chang-Soo Kim, Dae-Hyuk Kwon, Byung-Woog Cho, and Byung-Ki Sohn
A New pH-ISFET Based Dissolved Oxygen Sensor, Chang-Soo Kim, Dae-Hyuk Kwon, and Byung-Ki Sohn
Nuclear Magnetic Resonance Investigation of the Structures of Phosphate and Phosphate-containing Glasses: A Review, R. James Kirkpatrick and Richard K. Brow
Performance of AI Methods in Detecting Melanoma, Arve Kjoelen, M. J. Thompson, Scott E. Umbaugh, Randy Hays Moss, and William V. Stoecker
Interphase Mass Transfer from Bubbles, Drops, and Solid Spheres: Diffusional Transport Enhanced by External Chemical Reaction, Leonid S. Kleinman and X. B. Reed
Near-Critical and Supercritical Fluid Extraction of Polycyclic Aromatic Hydrocarbons from Town Gas Soil, Brian S. Kocher, Fouad O. Azzam, Teresa J. Cutright, and Sunggyu Lee
Single-Stage Remediation of Contaminated Soil-Sludge, Brian S. Kocher, Fouad O. Azzam, and Sunggyu Lee
Electrical and Thermal Transport Properties of (La,Ca)(Cr,Co)O3, Rasit Koc and Harlan U. Anderson
Freshman Engineering Pilot Program -- Can Small Classroom Experience Enhance Retention and Increase Satisfaction?, Mary Ann Koen, Daniel S. Stutts, and Jeffrey D. Cawlfield
High Pressure Waterjet Cooling/Lubrication to Improve Machining Efficiency in Milling, R. Kovacevic, C. Cherukuthota, and Marian Mazurkiewicz
Combined Research-Curriculum Development in Smart Structures, Leslie Robert Koval, Vittal S. Rao, and Frank J. Kern
Fractal and Projected Structure Properties of Soot Aggregates, Ümit Özgür Köylü, G. M. Faeth, Tiago L. Farias, and Maria da Gracia Carvalho
Fractal Morphology Analysis of Combustion-Generated Aggregates Using Angular Light Scattering and Electron Microscope Images, Ümit Özgür Köylü, Yangchuan Xing, and Daniel E. Rosner
Dynamic Modeling and Simulation of Two Cooperating Structurally-Flexible Robotic Manipulators, K. Krishnamurthy and L. Yang
Size Effects on the Upper Shelf Energy of a Neutron Irradiated Pressure Vessel Weld Metal, Arvind S. Kumar, L. E. Schubert, M. L. Hamilton, and N. S. Cannon
Coupled Horizontal and Rocking Vibration of Block Foundations, Sanjeev Kumar and Shamsher Prakash
Full Scale Relativistic Ab Initio Time Dependent Calculations for the L-K Vacancy Transfer in 208 MeV Ni²³⁺ on a Ge Solid Target, Peter Kurpick, Turgut Bastug, Burkhard Fricke, William D. Sepp, A. Warczak, Martin Jager, Joachim Hermann Ullrich, T. Kandler, Michael Schulz, A. Demian, Mark Damrau, Harald Brauning, Horst Schmidt-Bocking, and Mark Damrau
A New Technique for Describing the Deformation Behavior of the Rock Mass Around an Underground Opening in Salt, Oh-Sung Kwon and Hamish Miller
Precision Total Pressure Measurements of Propyne with Propane, Propene, and Propadiene, Edward A. Kyser and David B. Manley
On the Application of Magnetomechanical Models to Explain Damping in an Antiferromagnetic Copper-manganese Alloy, Shashi Laddha and David C. Van Aken
Neutron Fluence at the Pressure Vessel of a Pressurized Water Reactor Determined by the MCNP Code, Peter G. Laky and Nicholas Tsoulfanidis
Application of A-Si: H Radiation Detectors in Medical Imaging, Hyoung-Koo Lee
Utilization of Photoconductive Gain in A-Si:H Devices for Radiation Detection, Hyoung-Koo Lee, J. S. Drewery, W. S. Hong, T. Jing, S. N. Kaplan, and V. Perez-Mendez
Methanol-To-Gasoline vs. DME-To-Gasoline. II. Process Comparison and Analysis, Sunggyu Lee, Makarand R. Gogate, and Conrad J. Kulik
A Hierarchical Intelligent Controller for a Three Link Robot Arm, John E. Lentz and Levent Acar
Implementation of Sde Method to Represent Cutter Swept Volumes in 5-Axis Nc Milling, Ming-Chuan Leu, Denis Blackmore, L. P. Wang, and K. G. Pak
Mating of Rigid Parts by a Manipulator with Its Own Compliance, Ming-Chuan Leu and Y. L. Jia
Minimization Problems for Noncoercive Functionals Subject to Constraints, Vy Khoi Le and Klaus Schmitt
Regulation of G-protein αi2 Subunit Expression by Oxidized Low-Density Lipoprotein, James K. Liao and Stephen L. Clark
Oxidized Low-density Lipoprotein Decreases the Expression of Endothelial Nitric Oxide Synthase, James K. Liao, Wee Soo Shin, Wen Yee Lee, and Stephen L. Clark
Soot Emissions from Jet Aircraft, Harvey V. Lilenfeld, Philip D. Whitefield, and Donald E. Hagen
Pressureless Sintering of Boron Carbide Whisker Reinforced Alumina Matrix Composites, Xuan Lin and P. D. Ownby
SKS Splitting beneath Southern California, Kelly H. Liu, Paul M. Davis, and Stephen S. Gao
Analytic Framework for Specifying and Analyzing Imprecise Requirements, Xiaoqing Frank Liu and John Yen
Fin on a Pipe (Insulated Tip): Minimum Conditions for Fin to Be Beneficial, Dwight C. Look
Examination of Scattering At 90° from a Cylindrical Volume Illuminated by Polarized Light, Dwight C. Look and Y. R. Chen
Teaching Statistical Experimental Design using a Laboratory Experiment, Douglas K. Ludlow, Kirk H. Schulz, and John Erjavec
Dipole Moments and Anisotropies for Electron Capture Collisions between H⁺, He+2 and Na(3s,3p), C. J. Lundy and Ronald E. Olson
Force Control in Two-Dimensional End Milling Operations using Recurrent Neural Networks, Tao Luo, Q. Xu, K. Krishnamurthy, Wen Feng Lu, and Bruce M. McMillin
The Design of a Small Endothermic Generator for Laboratory Use, D. S. MacKenzie and Joseph William Newkirk
Discussion: Swerve During Three-Dimensional Impact of Rough Rigid Bodies, G. P. Macsithigh
Rigid-Body Impact with Friction-Various Approaches Compared, G. P. MacSithigh
Elastic and Inelastic Scattering of Electrons from Potassium, Don H. Madison, Matthias Lehmann, Robert P. McEachran, and Klaus Bartschat
Second-Order Distorted-Wave Calculation for Electron-Copper Scattering, Don H. Madison, John L. Schroeder, Klaus Bartschat, and Robert P. McEachran
A Comparison of FDTD Algorithms for Subcellular Modeling of Slots in Shielding Enclosures, Kuang-Ping Ma and James L. Drewniak
On the Effect of Matrix Relaxation during the Melting of Embedded Indium Particles, A. K. Malhotra and David C. Van Aken
Fertility Rates and the Socio-Economic Environment in Missouri, Linda M. Manning and V. A. Samarayanake
The Use Of Computer Workstations In The Study Of Environmental Geology: Integration Of Geophysical And Geologic Data, Alex Martinez, John F. Hopkins, Howard R. Feldman, Timothy R. Carr, Alan J. Felts, John H. Doveton, David R. Collins, Ross A. Black, and Neil Lennart Anderson
On the Creep of Directionally Solidified MoSi₂-Mo₅Si₃ Eutectics, D. P. Mason and David C. Van Aken
On the Microstructure and Crystallography of Directionally Solidified MoSi₂-Mo₅Si₃ Eutectics, D. P. Mason, David C. Van Aken, and J. F. Mansfield
Cellular Manufacturing System Design: A Holistic Approach, L. L. Massay, Colin Othniel Benjamin, and Yildirim Omurtag
A Simulator-Based Approach to Cellular Manufacturing System Design, Lorace L. Massay, Silvanus J. Udoka, and Colin Othniel Benjamin
Application of Fuzzy Sets to Car Body Structure NVH Design, Thomas K. Mathai and Donald L. Cronin
Relaxing Synchronization in Distributed Simulated Annealing, Bruce M. McMillin and Chul-Eui Hong
He²⁺ on He: State-Selective, Scattering-Angle-Dependent Capture Cross Sections Measured by Cold Target Recoil Ion Momentum Spectroscopy (COLTRIMS), Volker Mergel, Reinhard Dorner, Joachim Hermann Ullrich, Ottmar Jagutzki, Sergio Lencinas, S. Nuttgens, Lutz Spielberger, Marc Unverzagt, C. Lewis Cocke, Ronald E. Olson, Michael Schulz, Udo Buck, and Horst Schmidt-Bocking
State Selective Scattering Angle Dependent Capture Cross Sections Measured by Cold Target Recoil Ion Momentum Spectroscopy, Volker Mergel, Reinhard Dorner, Joachim Hermann Ullrich, Ottmar Jagutzki, Sergio Lencinas, S. Nuttgens, Lutz Spielberger, Marc Unverzagt, C. Lewis Cocke, Ronald E. Olson, Michael Schulz, Udo Buck, E. Zanger, W. Theisinger, M. Isser, S. Geis, and Horst Schmidt-Bocking
A Magnetic, Neutron-diffraction, and Mössbauer Spectral Study of the Ce₂Fe₁₇₋ₓSiₓ Solid Solutions, D. P. Middleton, Sanjay R. Mishra, Gary J. Long, Oran Allan Pringle, Zhongbo Hu, William B. Yelon, Fernande Grandjean, and K. H. J. Buschow
Vertical Resolution of a Seismic Survey in Stratigraphic Sequences less than 100 m Deep in Southeastern Kansas, Richard Daniel J. Miller, Neil Lennart Anderson, Howard Randall Feldman, and Evan K. Franseen
Improvement of Electronic Transport Characteristics of Amorphous Silicon by Hydrogen Dilution of Silane, A. Mireshghi, Hyoung-Koo Lee, W.-S. Hong, J. S. Drewery, T. Jing, S. N. Kaplan, and V. Perez-Mendez
Recovery of Zinc from Residues by SX-Galvanic Stripping Process, Michael S. Moats, C. M. Chang, and Thomas J. O'Keefe
Automatic PCB Inspection Systems, M. Moganti and Fikret Erçal
Estimation of the Thickness of Earth's Crust at the Profile Irkutsk - Ulan Bator - Undurshil using Spectral Ratios of Seismic Body Waves, Valentina V. Mordvinova, Yu A. Zorin, Stephen S. Gao, and Paul M. Davis
Multiple Target Detection and Tracking with a Bistatic Radar Using Adaptive Neural Networks, Christopher G. Morlier and S. N. Balakrishnan
Teaching Civil Engineering Design: Observations and Experiences, Charles Darwin Morris and Roger A. LaBoube
Spatial Distribution of Calcite Cement in the Santa Fe Group, Albuquerque Basin, NM: Implications for Ground-Water Resources, Peter S. Mozley, Joe Beckner, and Thomas M. Whitworth
Credibility in Engineering Education, Susan L. Murray and AnneMarie A. Daniel
Time Standards -- Good Enough for Government Work?, Susan L. Murray, Robert R. Safford, and Amanda M. Mitskevich
Management of Graduate Student Research, Donald D. Myers and Colin Othniel Benjamin
An Energy Based Approach to Undervoltage Load Shedding, Anoop Nanda and Mariesa Crow
Robot Motion Planning by Rules and Strategies Based on Reinforcement Learning Scheme, K. Naruse, Ming-Chuan Leu, and Y. Kakazu
On the Kramers–Kronig Relation for the Phase Spectrum, Patrick L. Nash, R. J. Bell, and Ralph William Alexander
Thermodynamic Method of Rock Durability, V. V. W. Nazimko and R. Larry Grayson
Aerodynamic Interference for Supersonic Low-Aspect-Ratio Missiles, Harlan F. Nelson and Brent W. Bossi
Predictions of Low Aspect Ratio Missile Aerodynamics, Harlan F. Nelson and Brent W. Bossi
Heat Transfer in Two Phase Solid Rocket Plumes, Harlan F. Nelson and John C. Fields
Particle Drag Coefficient in Solid Rocket Plumes, Harlan F. Nelson and John C. Fields
Physical Modeling of Three-phase Mixing in a Counter-current Reaction Launder(CCRL) Process for Metal Refining, Lloyd Robert Nelson, D. G. C. Robertson, and K. Narayana Swamy
Fuel Droplet Entrainment Studies for Minimization of Cold-Start Wall-Wetting, Lisa M. Nemecek, Robert M. Wagner, and J. A. Drallmeier
Bench-Scale System Design to Screen Catalyst-Coated Fabric Filters for Simultaneous Nox and Particulate Control, S. R. Ness and D. (Douglas) K. Ludlow
SCR Catalyst‐coated Fabric Filters for Simultaneous NOx and High‐temperature Particulate Control, Sumitra R. Ness, Grant E. Dunham, Greg F. Weber, and Douglas K. Ludlow
Properties of Hot-Pressed Cr-Cr3Si, Joseph William Newkirk and Joseph E. Price
Sedimentological and Palynological Characteristics of the E2.0 Reservoir (Middle Miocene) in the Kolo Creek Field, Niger Delta, Francisca Oboh-Ikuenobe
Correlation Between Sequoia Type Pollen and Lower Oligocene Transgressive Deposits in the Eastern Gulf Coast, Francisca Oboh-Ikuenobe and Lisa M. Reeves Morris
A Hexanuclear Copper Arylselenolate: Synthesis, Structure and Proposal for Its Rearrangement, Dietmar Ohlmann, Hans Pritzkow, Hansjorg Grutzmacher, Mitchell Anthamatten, and Rainer Glaser
Predicting Quality Characteristics of End-Milled Parts based on Multi-Sensor Integration using Neural Networks: Individual Effects of Learning Parameters and Rules, A. Chukwujekwu Okafor and O. Adetona
