Submissions from 2016
Topological Control on Silicates' Dissolution Kinetics, Isabella Pignatelli, Aditya Kumar, Mathieu Bauchy, and Gaurav Sant
Direct Experimental Evidence for Differing Reactivity Alterations of Minerals following Irradiation: The Case of Calcite and Quartz, Isabella Pignatelli, Aditya Kumar, Kevin G. Field, Bu Wang, Yingtian Yu, Yann Le Pape, Mathieu Bauchy, and Gaurav Sant
Vertical Scanning Interferometry: A New Method to Quantify Re-/De-Mineralization Dynamics of Dental Enamel, Isabella Pignatelli, Aditya Kumar, Kumar Shah, Magdalena Balonis, Mathieu Bauchy, Benjamin Wu, and Gaurav Sant
Thermodynamic Driving Force of the γ → ε Transformation and Resulting Mₛ Temperature in High-Mn Steels, S. T. Pisarik and David C. Van Aken
The Influence of Slightly and Highly Soluble Carbonate Salts on Phase Relations in Hydrated Calcium Aluminate Cements, Guillermo Puerta-Falla, Magdalena Balonis, Gwenn Le Saout, Aditya Kumar, Melanie Rivera, Gabriel Falzone, Narayan Neithalath, and Gaurav Sant
Examination of Spheroidal Graphite Growth and Austenite Solidification in Ductile Iron, Jingjing Qing, Von Richards, and David C. Van Aken
Stability of the M2 Phase of Vanadium Dioxide Induced by Coherent Epitaxial Strain, N. F. Quackenbush; Yijia Gu; and For full list of authors, see publisher's website.
Potential of Bioact1ve Glass Scaffolds as Implants for Structural Bone Repair, M. N. Rahaman, B. Sonny Bal, and Lynda Bonewald
In Vitro Degradation and Conversion of Melt-Derived Bioactive Glass Microfibers in Simulated Body Fluid, M. N. Rahaman, Xin Liu, and D. E. Day
Engineering Novel Infrared Glass Ceramics For Advanced Optical Solutions, K. Richardson, A. Buff, C. (Charmayne) Smith (Lonergan), L. Sisken, J. David Musgraves, P. Wachtel, T. Mayer, A. Swisher, A. Pogrebnyakov, M. Kang, C. Pantano, D. Werner, A. Kirk, S. Aiken, and C. Rivero-Baleine
Kinetics of Carbon Transfer from Magnesia-Graphite Ladle Refractories to Ultra-Low Carbon Steel, Andrew A. Russo, Jeffrey D. Smith, Ronald J. O'Malley, and Von Richards
Mechanism for Carbon Transfer from Magnesia-Graphite Ladle Refractories to Ultralow-Carbon Steel, Andrew A. Russo, Jeffrey D. Smith, Ronald J. O'Malley, and Von Richards
Characterization of the Relationship between Ceramic Pot Filter Water Production and Turbidity in Source Water, Carlo Salvinelli, A. Curt Elmore, Mary R. Reidmeyer, Kristen David Drake, and Khaldoun I. Ahmad
Chemotherapeutic Copolymers Prepared: Via the RAFT Polymerization of Prodrug Monomers, H. N. Son, Selvi Srinivasan, J. Y. Yhee, Debobrato Das, Bridget K. Daugherty, G. Y. Berguig, V. G. Oehle, S. H. Kim, K. Kim, I. C. Kwon, Patrick S. Stayton, and Anthony J. Convertine
Fabrication of Metal Matrix Syntactic Foams by a Laser Additive Manufacturing Process, M. Spratt, Joseph William Newkirk, and K. Chandrashekhara
Powders for Additive Manufacturing Processes: Characterization Techniques and Effects on Part Properties, Austin T. Sutton, Caitlin S. Kriewall, Ming-Chuan Leu, and Joseph William Newkirk
Chloride-Induced Corrosion Mechanism and Rate of Enamel- and Epoxy-Coated Deformed Steel Bars Embedded in Mortar, Fujian Tang, Genda Chen, and Richard K. Brow
Grain Refinement Strategies in High Strength Cast Steel, David C. Van Aken, T. O. Webb, and J. D. Green
Micro/Nano-Structural Examination and Fission Product Identification in Neutron Irradiated Agr-1 TRISO Fuel, Isabella Johanna Van Rooyen, Thomas Martin Lillo, Haiming Wen, Connie M. Hill, Terry G. Holesinger, Yaqiao Wu, and Jeffery A. Aguiar
Influence of Cu Doping in Borosilicate Bioactive Glass and the Properties of its Derived Scaffolds, Hui Wang, Shichang Zhao, Wei Xiao, Jingzhe Xue, Youqu Shen, Jie Zhou, Wenhai Huang, M. N. Rahaman, Changqing Zhang, and Deping Wang
Effects of Ageing Conditions on E-Glass Failure Strain and Dynamic Fatigue, Qingwei Wang, Richard K. Brow, Hong Li, and Erica A. Roncheto
Effect of Aging on the Failure Characteristics of E-Glass Fibers, Qingwei Wang, Richard K. Brow, Hong Li, and Erica Ronchetto
Preface to the Special Issue on Advanced Microstructural Characterization of Materials, Haiming Wen
A Novel Approach to Developing Biomimetic ("Nacre-Like") Metal-Compliant-Phase (Nickel-Alumina) Ceramics through Coextrusion, Ryan P. Wilkerson, Bernd Gludovatz, Jeremy Lee Watts, Antoni P. Tomsia, Greg Hilmas, and Robert O. Ritchie
Creation of Bioactive Glass (13–93) Scaffolds for Structural Bone Repair using a Combined Finite Element Modeling and Rapid Prototyping Approach, Wei Xiao, Mohsen Asle Zaeem, B. Sonny Bal, and M. N. Rahaman
Preparation of Resorbable Carbonate-Substituted Hollow Hydroxyapatite Microspheres and their Evaluation in Osseous Defects in vivo, Wei Xiao, B. Sonny Bal, and M. N. Rahaman
Erratum: Orientations of Low-Energy Domain Walls in Perovskites with Oxygen Octahedral Tilts (Physical Review B - Condensed Matter and Materials Physics (2014) 90 (220101)), Fei Xue, Yijia Gu, Linyun Liang, Yi Wang, and Long-Qing Chen
Erratum: "Composition- and Pressure-Induced Ferroelectric to Antiferroelectric Phase Transitions in Sm-Doped BiFeO₃ System" [Appl. Phys. Lett. 106, 012903 (2015)], Fei Xue, Linyun Liang, Yijia Gu, Ichiro Takeuchi, Sergei V. Kalinin, and Long-Qing Chen
Strain Phase Separation: Formation of Ferroelastic Domain Structures, Fei Xue, Yongjun Li, Yijia Gu, Jinxing Zhang, and Long-Qing Chen
Theranostic Oxygen Reactive Polymers for Treatment of Traumatic Brain Injury, Julia Xu, Menko Ypma, Peter A. Chiarelli, Joshua Park, Richard G. Ellenbogen, Patrick S. Stayton, Pierre D. Mourad, Donghoon Lee, Anthony J. Convertine, and Forrest M. Kievit
Constitutive Modeling and Hot Deformation Behavior of Duplex Structured Mg-Li-Al-Sr Alloy, Yan Yang, Xiaodong Peng, Fengjuan Ren, Haiming Wen, Junfei Su, and Weidong Xie
Direct Laser Deposition of Ti-6Al-4V from Elemental Powder Blends, Lei Yan, Xueyang Chen, Wei Li, Joseph William Newkirk, and Frank W. Liou
Simulation of Cooling Rate Effects on Ti-48Al-2Cr-2Nb Crack Formation in Direct Laser Deposition, Lei Yan, Wei Li, Xueyang Chen, Yunlu Zhang, Joseph William Newkirk, Frank W. Liou, and David Dietrich
Effective Elastic Moduli of Core-Shell-Matrix Composites, Benjamin A. Young, Amanda M. K. Fujii, Alexander M. Thiele, Aditya Kumar, Gaurav Sant, Ertugrul Taciroglu, and Laurent Pilon
Coupled Crystal Orientation-Size Effects on the Strength of Nano Crystals, Rui Yuan, Irene J. Beyerlein, and Caizhi Zhou
Statistical Dislocation Activation from Grain Boundaries and its Role in the Plastic Anisotropy of Nanotwinned Copper, Rui Yuan, Irene J. Beyerlein, and Caizhi Zhou
Yield Symmetry and Reduced Strength Differential in Mg-2.5Y Alloy, Dalong Zhang, Haiming Wen, Manoj Arul Kumar, Fei Chen, Lianmeng Zhang, Irene J. Beyerlein, Julie M. Schoenung, Subhash Mahajan, and Enrique J. Lavernia
Competing Mechanisms Between Dislocation and Phase Transformation in Plastic Deformation of Single Crystalline Yttria-Stabilized Tetragonal Zirconia Nanopillars, Ning Zhang and Mohsen Asle Zaeem
Erratum: Copper-Doped Borosilicate Bioactive Glass Scaffolds with Improved Angiogenic and Osteogenic Capacity for Repairing Osseous Defects (Acta Biomater. (2015) 14 (185-196)), Shichang Zhao, Hui Wang, Yadong Zhang, Wenhai Huang, M. N. Rahaman, Zhongtang Liu, Deping Wang, and Changqing Zhang
Computational Modelling for Phase Transformation Prediction in Super-Invar Alloys: Analytical and Experimental Data, Alexander S. Zhilin, Valeria R. Ramazanova, Joseph William Newkirk, Tarak A. Amine, and Deborah Alvarenga
Submissions from 2015
An SEM/EDS Statistical Study of the Effect of Mini-Mill Practices on the Inclusion Population in Liquid Steel, Obinna Adaba, Marc Harris, Ronald J. O'Malley, Semen Naumovich Lekakh, Von Richards, and Neil Sutcliffe
Producing High Strength Aluminum Alloy by Combination of Equal Channel Angular Pressing and Bake Hardening, Hamid Alihosseini, Mohsen Asle Zaeem, Kamran Dehghani, and Ghader Faraji
Methodology for Studying Effect of Cooling Rate During Laser Deposition on Microstructure, Tarak A. Amine, Joseph William Newkirk, and Frank W. Liou
A Modified Two-Mode Phase-Field Crystal Model Applied to Face-Centered Cubic and Body-Centered Cubic Orderings, Ebrahim Asadi and Mohsen Asle Zaeem
A Review of Quantitative Phase-Field Crystal Modeling of Solid-Liquid Structures, Ebrahim Asadi and Mohsen Asle Zaeem
Quantifying a Two-Mode Phase-Field Crystal Model for BCC Metals at Melting Point, Ebrahim Asadi and Mohsen Asle Zaeem
Quantitative Modeling of the Equilibration of Two-Phase Solid-Liquid Fe by Atomistic Simulations on Diffusive Time Scales, Ebrahim Asadi, Mohsen Asle Zaeem, Sasan Nouranian, and Michael I. Baskes
Two-Phase Solid-Liquid Coexistence of Ni, Cu, and Al by Molecular Dynamics Simulations using the Modified Embedded-Atom Method, Ebrahim Asadi, Mohsen Asle Zaeem, Sasan Nouranian, and Michael I. Baskes
Advances in Modeling of Solidification Microstructures, Mohsen Asle Zaeem
A Review on Hydride Precipitation in Zirconium Alloys, Jacob Bair, Mohsen Asle Zaeem, and Michael R. Tonks
Achieving Lightweight, Wear Resistant Steels through Nitriding, Laura Bartlett and Sabra C. Serino
Intracellular Delivery System for Antibody-Peptide Drug Conjugates, Geoffrey Y. Berguig, Anthony J. Convertine, Shani Frayo, Hanna B. Kern, Erik Procko, Debashish Roy, Selvi Srinivasan, Daciana Margineantu, Garrett Booth, Maria C. Palanca-Wessels, David Baker, David M. Hockenbery, Oliver W. Press, and Patrick S. Stayton
Erratum: "Impact of Symmetry on the Ferroelectric Properties of CaTiO₃ Thin Films" (Applied Physics Letters 106:162904 (2015)), Michael D. Biegalski; Liang Qiao; Yijia Gu; Apurva Mehta; Qian He; and For full list of authors, see publisher's website.
Impact of Symmetry on the Ferroelectric Properties of CaTiO₃ Thin Films, Michael D. Biegalski; Liang Qiao; Yijia Gu; Apurva Mehta; Qian He; and For full list of authors, see publisher's website.
Surface Modulation of Silicon Nitride Ceramics for Orthopaedic Applications, Ryan Bock, Bryan J. McEntire, B. Sonny Bal, M. N. Rahaman, Marco Boffelli, and Giuseppe Pezzotti
Effect of SMAW Manufacturing Process in High-Cycle Fatigue of AISI 304 Base Metal using AISI 308L Filler Metal, Mario F. Buchely, Henry A. Colorado, and H. E. Jaramillo
An Engineering Model for the Penetration of a Rigid-Rod into a Cowper -- Symonds Low-Strength Material, Mario F. Buchely and A. Maranon
Cerium-Based Oxide Coatings, Carlos E. Castano, Matthew O'Keefe, and William Fahrenholtz
Method and System for Purifying Charged Radioisotopes, Cathy Sue Cutler, Gary John Ehrhardt, Hendrik Petrus Engelbrecht, and D. E. Day
Effects of Transition Metals on the Oxidation Behavior of ZrB₂ Ceramics, Maryam Kazemzadeh Dehdashti, William Fahrenholtz, and Greg Hilmas
Understanding the Agglomeration Behavior of Selected Copper Ores using Statistical Design of Experiments, Nikhil Dhawan, M. Sadegh Safarzadeh, Jan D. Miller, Michael L. Free, and Michael S. Moats
Chemical Oxidative Polymerization, Optical, Electrochemical and Kinetic Studies of 8-amino-2-naphthol, Fatih Dogan, Ismet Kaya, Ali Bilici, and Mehmet Ercengiz Yildirim
Synthesis Route to Regioselectively Functionalized Bifunctional Polyarene, Fatih Dogan, Ismet Kaya, and Kevser Temizkan
Focus on properties and applications of perovskites, Fatih Dogan, Hong Lin, Maryline Guilloux-Viry, and Octavio J. Pena
Surface-Induced Changes in the Conformation and Glucan Production of Glucosyltransferase Adsorbed on Saliva-Coated Hydroxyapatite, Kenan P. Fears, Mireya Gonzalez-Begne, Corey T. Love, D. E. Day, and Hyun Koo
Burner, Emitter, and Recuperator Development for Lightweight Thermophotovoltaic Power Supply, Lewis M. Fraas, Leonid Minkin, James E. Avery, Hui She, Lucian G. Ferguson, and Fatih Dogan
Effects of Co and Sintering Method on Microstructure and Mechanical Behavior of a High-Entropy Al₀.₆NiFeCrCo Alloy Prepared by Powder Metallurgy, Zhiqiang Fu, Weiping Chen, Haiming Wen, Zhen Chen, and Enrique J. Lavernia
Microstructure and Mechanical Behavior of a Novel Co₂₀Ni₂₀Fe₂₀Al₂₀Ti₂₀ Alloy Fabricated by Mechanical Alloying and Spark Plasma Sintering, Zhiqiang Fu, Weiping Chen, Haiming Wen, Sam Morgan, Fei Chen, Baolong Zheng, Yizhang Zhou, Lianmeng Zhang, and Enrique J. Lavernia
Enhancing Grain Refinement of Austenitic Steel with Ti Additions by Melt Treatment Sequence Optimization, Gun Ge, Semen Naumovich Lekakh, and Ronald J. O'Malley
In-Situ Characterization of Borate Glass Dissolution Kinetics by µ-Raman Spectroscopy, Jaime L. George and Richard K. Brow
Effect of Immersion Medium on the Degradation and Conversion of Silicate (13-93) Bioactive Glass Scaffolds, Yifei Gu, Wenhai Huang, and M. N. Rahaman
Nanoscale Mechanical Switching of Ferroelectric Polarization Via Flexoelectricity, Yijia Gu, Zijian Hong, Jason Britson, and Long-Qing Chen
Origin of Interfacial Polar Order in Incipient Ferroelectrics, Yijia Gu, Nan Wang, Fei Xue, and Long-Qing Chen
Characterization of a Bending Fatigue Mini-Specimen Technique (Krouse Type) for Nuclear Materials, Ahmed S. Haidyrah, Carlos Henry Castano Giraldo, and Joseph William Newkirk
Effect of Carbon on the Thermal and Electrical Transport Properties of Zirconium Diboride, Gregory J K Harrington, Greg Hilmas, and William Fahrenholtz
Improved Methodology for Automated SEM/EDS Non-Metallic Inclusion Analysis of Mini-Mill and Foundry Steels, Marc Harris, Obinna Adaba, Semen Naumovich Lekakh, Ronald J. O'Malley, and Von Richards
Evolution of Non-Metallic Inclusions in Foundry Steel Casting Processes, Marc Harris, Von Richards, Ronald J. O'Malley, and Semen Naumovich Lekakh
New Low to Medium Temperature Electrolyte Separation Method and System for Alkaline Water Electrolysis, J. L. Hartvigsen, Joseph D. Smith, and Fatih Dogan
Dynamic Characterization of Roma Plastilina No. 1 from Drop Test and Inverse Analysis, C. Hernandez, Mario F. Buchely, and A. Maranon
All-Optical Characterization of Fs-Laser Induced Refractive Index Changes in Bulk and At the Surface of Zinc Phosphate Glasses, Javier Hernandez-Rueda, V. Semenov, N. Troy, Charmayne E.. Smith, Richard K. Brow, and Denise M. Krol
Fs-Laser Induced Optical Changes in Zinc Aluminum Phosphate Glasses, Javier Hernandez-Rueda, Charmayne E. Smith, Richard K. Brow, and Denise M. Krol
Fs-laser Induced Optical Changes In Zinc Aluminum Phosphate Glasses, Javier Hernandez-Rueda, Charmayne E. Smith (Lonergan), Richard K. Brow, and Denise M. Krol
Fs-laser Induced Optical Changes In Zinc Aluminum Phosphate Glasses, Javier Hernandez-Rueda, Charmayne E. Smith (Lonergan), Richard K. Brow, and Denise M. Krol
Microstructural and Fracture Behavior of Phosphorus-Containing Fe-30Mn-9Al-1Si-0.9C-0.5Mo Alloy Steel, Ryan A. Howell and David C. Van Aken
Effect of Plastic Incompatibility on the Strain Hardening Behavior of Al-TiN Nanolayered Composites, Sixie Huang, Jian Wang, and Caizhi Zhou
Comparison of a Native Clay Soil and an Engineered Clay used in Experimental Ceramic Pot Filter Fabrication, L. A. Hubbel, A. Curt Elmore, and Mary R. Reidmeyer
Non Prismatic Air-Breathing Fuel Cells: Concept, Design and Manufacturing, Sriram Praneeth Isanaka, Frank W. Liou, and Joseph William Newkirk
Quantitative Discrimination of the Nano-Pore-Structure of Cement Paste during Drying: New Insights from Water Sorption Isotherms, Hamlin M. Jennings, Aditya Kumar, and Gaurav Sant
Polarization Switching of the Incommensurate Phases Induced by Flexoelectric Coupling in Ferroelectric Thin Films, Limei Jiang, Yichun Zhou, Yi Zhang, Qiong Yang, Yijia Gu, and Long-Qing Chen
Influence of Length-Scales on Spatial Distribution and Interfacial Characteristics of B₄c in a Nanostructured Al Matrix, Lin Jiang, Haiming Wen, Hanry Yang, Tao Hu, Troy D. Topping, Dalong Zhang, Enrique J. Lavernia, and Julie M. Schoenung
Comparison of Borate Bioactive Glass and Calcium Sulfate As Implants for the Local Delivery of Teicoplanin in the Treatment of Methicillin-Resistant Staphylococcus Aureus-Induced Osteomyelitis in a Rabbit Model, Weitao Jia, Qiang Fu, Wenhai Huang, Changqing Zhang, and M. N. Rahaman
Electrolytic Recovery of Bismuth and Copper as a Powder from Acidic Sulfate Effluents using an emew® Cell, Wei Jin, Paul I. Laforest, Alex Luyima, Weldon Read, Luis M. Navarro, and Michael S. Moats
Laser Metal Deposition of Functionally Gradient Materials from Elemental Copper and Nickel Powders, Sreekar Karnati, Todd E. Sparks, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, and William J. Seufzer
Corrigendum to "Plasma Arc Welding of ZrB₂-20 vol% ZrC Ceramics" [J. Eur. Ceram. Soc. 34 (2014) 3549-3557], Derek S. King, Greg Hilmas, and William Fahrenholtz
In Vitro Assessment of Laser Sintered Bioactive Glass Scaffolds with Different Pore Geometries, Krishna C. R. Kolan, Albin Thomas, Ming-Chuan Leu, and Greg Hilmas
Strengthening Mechanisms and Deformation Behavior of Cryomilled Al-Cu-Mg-Ag Alloy, Lilia R. Kurmanaeva, Troy D. Topping, Haiming Wen, Haruka Sugahara, Hanry Yang, Dalong Zhang, Julie M. Schoenung, and Enrique J. Lavernia
Well-Defined Single Polymer Nanoparticles for the Antibody-Targeted Delivery of Chemotherapeutic Agents, D. D. Lane, D. Y. Chiu, F. Y. Su, Selvi Srinivasan, Hanna B. Kern, Oliver W. Press, Patrick S. Stayton, and Anthony J. Convertine
Dynamic Intracellular Delivery of Antibiotics Via PH-Responsive Polymersomes, D. D. Lane, F. Y. Su, D. Y. Chiu, Selvi Srinivasan, J. T. Wilson, Daniel M. Ratner, Patrick S. Stayton, and Anthony J. Convertine
Characterization and Modeling of Anisotropic SL Pattern during Investment Casting Process, Haifeng Li, J. Chen, K. Chandrashekhara, Mingzhi Xu, Semen Naumovich Lekakh, and Von Richards
Effects of Temperature on Aqueous Freeform Extrusion Fabrication, Jie Li, Ming-Chuan Leu, and Greg Hilmas
