Submissions from 1996
Determination of Blasting Criteria During the Construction of an In-Pit Lime Kiln, Paul Nicholas Worsey, S. G. Giltner, T. Drechsler, R. Ecklecamp, and R. Inman
Vibration Control During the Construction of an In-Pit Lime Kiln, Paul Nicholas Worsey, S. G. Giltner, T. Drechsler, R. Ecklecamp, and R. Inman
Statistical Methods for Assessing Compliance with the Respirable Dust Standard, S. Yuan and R. Larry Grayson
Simulation of Cascading Pillar Failure in Room-And-Pillar Mines Using Boundary-Element-Method, R. Karl Zipf
Submissions from 1995
Bump Control Design Protocol for Room-And-Pillar Coal Mining, A. A. Campoli, T. P. Mucho, and R. Karl Zipf
Planning of Support Work in Underground Coal Mines Using MANSUPP, J. M. Dean and R. Larry Grayson
Constrained Simulation of a Mine Production System, Samuel Frimpong and J. M. Whiting
A Practical Test of Coal Spontaneous Combustion, Stewart Gillies and A. S. Arief
Measurement of Coal Permeability Using Large Samples, Stewart Gillies, I. Gray, and Y. Ham
Water Management Systems in Australian Mines, Stewart Gillies and C. V. McQuade
Mining Education in Australia, Tad S. Golosinski
Measurement of Solids in Coal Slurry Lines with an Impedance Cell Technique, B. Jensen, Stewart Gillies, G. J. Tuck, and B. K. Abraham
High Pressure Waterjet Cooling/Lubrication to Improve Machining Efficiency in Milling, R. Kovacevic, C. Cherukuthota, and Marian Mazurkiewicz
Thermodynamic Method of Rock Durability, V. V. W. Nazimko and R. Larry Grayson
Assessment of the Extent of Fire Found in Abandoned Mine Lands Using Non-Invasive Tracer Techniques, Lee W. Saperstein
Chinese Mine Ventilation, Jerry C. Tien
Surface Properties of Silica in Mixed Dusts, W. E. Wallace, M. J. Keane, J. C. Harrison, J. W. Stephens, P. S. Brower, R. Larry Grayson, and M. D. Attfield
An Analysis of Controlled District Recirculation Systems, Y. J. Wang and Jerry C. Tien
Cost Analysis of Controlled Partial Recirculation of Mine Ventilation Air At Mount Isa Mines, H. W. Wu, Stewart Gillies, and A. C. Nixon
Submissions from 1994
The Massive Collapse of Coal Pillars -- Case Histories from the United States, F. E. Chase, R. Karl Zipf, and C. Mark
Economic Feasibility of Introducing Trolly Assisted Haulage to an Australian Open Pit Mine, Samuel Frimpong and Tad S. Golosinski
Performance of Dragline Hoist and Drag Ropes, Tad S. Golosinski
Issues in Australasian Mining Taxation: The Arguments for and Against Resource Rent Taxation, Graeme E. Hancock and Stewart Gillies
Review of Coal Dust Explosibility Research, B. Jensen and Stewart Gillies
The Effect of Added Base on Coal Wetting Ability of Nonionic Surfactant Solutions Used for Dust Control, J. Kim and Jerry C. Tien
The Effect of Added Base on Coal Wetting Ability of Polyoxyethylene (POE) and Polyglycerol-Based Nonionic Surfactant Solutions, J. Kim and Jerry C. Tien
Longwall Electrical Control Issues: A Hazardous Waste Containment Application, D. Martinelli, R. S. Nutter Jr., and R. Larry Grayson
Materials Disintegration by High Pressure Water Jet - Review of Recent Development, Marian Mazurkiewicz
Matching Longwall and Continuous Miner Productivity Requirements, M. P. Miano, R. Larry Grayson, and S. Yuan
A Fundamental Test for Parameter Evaluation, David A. Summers and J. G. Blaine
Competitiveness of Australian Coal in Relation to Transport Distance, Supriyadi, Stewart Gillies, and R. M. Hooper
Transport Distance and Australian Coal Marketing, Supriyadi, Stewart Gillies, and R. M. Hooper
A Short Course in Practical Mine Ventilation Design and Control: Principles and Practices, Jerry C. Tien
Reducing Shock Losses At Overcast Can Save Money, Jerry C. Tien
The Gold Industry of China, Jerry C. Tien
Variance Simulation: A Practical Alternative to Monte-Carlo Simulation and Sensitivity Analysis, W. S. Tortike and Samuel Frimpong
Surface Properties of Respirable Silicate and Aluminosilicate Dusts Affecting Bioavailability, W. E. Wallace, M. J. Keane, J. C. Harrison, J. W. Stephens, P. S. Brower, R. Larry Grayson, V. Vallyathan, and M. D. Attfield
UV Curable Urethane Encapsulant for Ceramic Chip Carriers, John W. Wilson
The Problem of Small Mine Safety in West Virginia, G. L. Winn, R. Larry Grayson, and G. D. Elliott
Submissions from 1993
The Reaction of Class 1.1 Propellants and Explosives to Water Jet Impact, S. G. Giltner, Oliver C. Sitton, and Paul Nicholas Worsey
Benchmarking the Performance of Western Australian Mines, Tad S. Golosinski and J. M. Abernethy
Petroleum Applications of Emerging High-Pressure Waterjet Technology, A. W. Iyoho, David A. Summers, and Greg Galecki
A Capacitance Meter for Measuring Total Airborne Coal Dust Concentrations, B. Jensen, Stewart Gillies, G. J. Tuck, and B. K. Abraham
Enhanced Dust Suppression Using Surfactants, J. Kim and Jerry C. Tien
Coal Log Pipeline Transport System and Technology, T. R. Marrero and John W. Wilson
Two-Dimensional Mine Characteristic Graph for Ventilation Planning, Xu Rilung and Jerry C. Tien
Technology for the Future: Report of the SME Research Forum, Lee W. Saperstein
Concept and Performance of Coal-Log Pipelines, John W. Wilson and T. R. Marrero
Blast Plug and Stemming Construction for Blast Holes, Paul Nicholas Worsey
Dual Purpose Fuze, Paul Nicholas Worsey
Method of Stemming a Blast Hole, Paul Nicholas Worsey
Stress Analysis in Coal Mines with MULSIM/NL, R. Karl Zipf
Submissions from 1992
Evaluation of Mineral Ventures Using Modern Financial Methods, Samuel Frimpong
Mine Investment Analysis by the Generation of Profitability Moments, Samuel Frimpong and J. M. Whiting
Method of Trepanate Drilling of Deep and Large Diameter Holes in Hard Rocks, Greg Galecki and Marian Mazurkiewicz
Practical Application of an Innovative Microseismic Source Location Procedure, Mao Chen Ge and P.K. Kaiser
Educating Australian Mining Engineering Students for the Future, Stewart Gillies
In-Situ Mine Measurement of Rock Conductivity and Diffusivity Properties, Stewart Gillies, P. Creevy, G. Danko, and P. F. Mousset-Jones
Mine Water Resource Management Systems, Stewart Gillies, C. V. McQuade, and A. H. Lee
Analysis of Heat Sources in a Large Mechanized Development End at Mount Isa Mine, Stewart Gillies, C. A. Nixon, and M. J. Howes
Selection Considerations for 218 T (240 St) Off-Highway Trucks, Tad S. Golosinski
Power Requirements and Resistance to Motion of Oil Sand Conveyors During Winter Operations, Tad S. Golosinski, J. Wedzicha, and W. Cholewa
Estimating the Quartz-Related Fibrogenic Potential of Respirable Coal Mine Dusts, R. Larry Grayson, J. C. Harrison, W. E. Wallace, and T. Simonyi
Review of Methane Emission and Prediction Research in Longwall Coal Mines, B. Jensen, Stewart Gillies, N. Jones, and J. M. Anderson
High Pressure Lubricooling Machining of Metals, Marian Mazurkiewicz
End-Of-Pipeline Requirements for Coal Log Pipeline Technology, John W. Wilson
Application of Geostatistics to Construct a Coal Quality Model, Y. Y. Wu, Stewart Gillies, and Geoffrey D. Just
Analysis of Stable and Unstable Pillar Failure Using a Local Mine Stiffness Method, R. Karl Zipf
MULSIM/NL Application and Practitioner's Manual, R. Karl Zipf
MULSIM/NL Theoretical and Programmer's Manual, R. Karl Zipf
Submissions from 1991
Dynamic Analysis Of Belt Drive Tension Forces During Rapid Engine Acceleration, Clark R. Barker, Larry R. Oliver, and William F. Breig
Nonlinear Model for Landing Gear Shimmy, J. Baumann, Clark R. Barker, and Leslie Robert Koval
Design Considerations for the Yucca Mountain Project Site Characterization, Richard Lee Bullock and J. D. Grenia
Determination of the in Situ Mine Surface Heat Transfer Coefficient, Stewart Gillies, P. Creevy, G. Danko, and P. F. Mousset-Jones
The Success of Fly-In Fly-Out Australian Mining Operations, Stewart Gillies, Hsin Wei Wu, and Geoffrey D. Just
Mathematical Modelling of the Coal Instantaneous Ash vs. . . Density Curve, Stewart Gillies, Y. Y. Wu, and Geoffrey D. Just
Practical Aspects of Availability and Reliability Management in a Large Open Pit Mine, Tad S. Golosinski
Potential Role of Particle Characteristics on Coal Mine Respirable Dust Standards, R. Larry Grayson
Goal-Programming Based, Expert Worker Scheduling System for Underground Coal Mines, R. Larry Grayson and S. Yuan
Semianalytical Productivity Models for Perforated Completions, M. Karakas and Syed M. Tariq
Disintegration of Wood, Marian Mazurkiewicz
Techniques to Reduce Soil Compaction in Reclaimed Soils: Final Report, Lee W. Saperstein
New Innovative Drilling Bit for Straighter Blast Holes and Improved Productivity, R. D. Skaggs and Paul Nicholas Worsey
Analyses and Applications of Pressure, Flow Rate, and Temperature Measurements During a Perforating Run, Syed M. Tariq and Luis C. Ayestaran
Use of Surfactants for Dust Control in Mines. A Laboratory Study, Y. P. Wang, Jerry C. Tien, John W. Wilson, and M. H. Erten
A Nuclear Fragmentation Energy Deposition Model, John W. Wilson, D. M. Ngo, T. N. Forgarty, and W. W. Buck
Conventional and Innovative Mining and Excavation, John W. Wilson, M. Poad, S. Morreale, and E. Foster
Submissions from 1990
Smoothwall Blasting Planned for the Underground Research Facility At Yucca Mountain, Richard Lee Bullock and J. McKenzie
Interpretation of Physical Status of Arrival Picks for Microseismic Source Location, Mao Chen Ge and P.K. Kaiser
Correlation of Respirable Dust Characteristics to Coal Seams, R. Larry Grayson
The Potential Use of Expert Training Systems in the Development of Supervisory Decision Making Skills, R. Larry Grayson
Mine Management Support System. a Knowledge-Based System for Better Management of Underground Coal Mines, R. Larry Grayson, C. M. Watts, S. Yuan, J. Dean, and R. S. Nutter
Tailored Safety Training for Miners in Small Pennsylvania Surface Coal Mines, D. Passmore, J. Bennett, M. Radomsky, and Lee W. Saperstein
Reclamation, Lee W. Saperstein
A Knowledge-Based Expert System for Managing Underground Coal Mines in the U.S., H. Singh, S. Yuan, C. M. Watts, J. M. Dean, N. P. Reddy, R. S. Nutter Jr., and R. Larry Grayson
New, Generalized Criteria for Determining the Level of Underbalance for Obtaining Clean Perforations, Syed M. Tariq
The Design and Implementation of Graphic Support for the Mine Management Support System, V. Varada, H. Singh, and R. Larry Grayson
The Design and Implementation of a Work Scheduling System for the Mine Management, U. Varanasi, H. Singh, and R. Larry Grayson
Mixed-Mode Fracture Toughness Testing of Coal, R. Karl Zipf and Z. T. Bieniawski
Decreasing Coal Bump Risk Through Optimal Cut Sequencing with a Non-Linear Boundary Element Program, R. Karl Zipf and K. A. Heasley