Submissions from 1992
End-Of-Pipeline Requirements for Coal Log Pipeline Technology, John W. Wilson
Application of Geostatistics to Construct a Coal Quality Model, Y. Y. Wu, Stewart Gillies, and Geoffrey D. Just
Analysis of Stable and Unstable Pillar Failure Using a Local Mine Stiffness Method, R. Karl Zipf
MULSIM/NL Application and Practitioner's Manual, R. Karl Zipf
MULSIM/NL Theoretical and Programmer's Manual, R. Karl Zipf
Submissions from 1991
Dynamic Analysis Of Belt Drive Tension Forces During Rapid Engine Acceleration, Clark R. Barker, Larry R. Oliver, and William F. Breig
Nonlinear Model for Landing Gear Shimmy, J. Baumann, Clark R. Barker, and Leslie Robert Koval
Design Considerations for the Yucca Mountain Project Site Characterization, Richard Lee Bullock and J. D. Grenia
Determination of the in Situ Mine Surface Heat Transfer Coefficient, Stewart Gillies, P. Creevy, G. Danko, and P. F. Mousset-Jones
The Success of Fly-In Fly-Out Australian Mining Operations, Stewart Gillies, Hsin Wei Wu, and Geoffrey D. Just
Mathematical Modelling of the Coal Instantaneous Ash vs. . . Density Curve, Stewart Gillies, Y. Y. Wu, and Geoffrey D. Just
Practical Aspects of Availability and Reliability Management in a Large Open Pit Mine, Tad S. Golosinski
Potential Role of Particle Characteristics on Coal Mine Respirable Dust Standards, R. Larry Grayson
Goal-Programming Based, Expert Worker Scheduling System for Underground Coal Mines, R. Larry Grayson and S. Yuan
Semianalytical Productivity Models for Perforated Completions, M. Karakas and Syed M. Tariq
Disintegration of Wood, Marian Mazurkiewicz
Techniques to Reduce Soil Compaction in Reclaimed Soils: Final Report, Lee W. Saperstein
New Innovative Drilling Bit for Straighter Blast Holes and Improved Productivity, R. D. Skaggs and Paul Nicholas Worsey
Analyses and Applications of Pressure, Flow Rate, and Temperature Measurements During a Perforating Run, Syed M. Tariq and Luis C. Ayestaran
Use of Surfactants for Dust Control in Mines. A Laboratory Study, Y. P. Wang, Jerry C. Tien, John W. Wilson, and M. H. Erten
A Nuclear Fragmentation Energy Deposition Model, John W. Wilson, D. M. Ngo, T. N. Forgarty, and W. W. Buck
Conventional and Innovative Mining and Excavation, John W. Wilson, M. Poad, S. Morreale, and E. Foster
Submissions from 1990
Smoothwall Blasting Planned for the Underground Research Facility At Yucca Mountain, Richard Lee Bullock and J. McKenzie
Interpretation of Physical Status of Arrival Picks for Microseismic Source Location, Mao Chen Ge and P.K. Kaiser
Correlation of Respirable Dust Characteristics to Coal Seams, R. Larry Grayson
The Potential Use of Expert Training Systems in the Development of Supervisory Decision Making Skills, R. Larry Grayson
Mine Management Support System. a Knowledge-Based System for Better Management of Underground Coal Mines, R. Larry Grayson, C. M. Watts, S. Yuan, J. Dean, and R. S. Nutter
Tailored Safety Training for Miners in Small Pennsylvania Surface Coal Mines, D. Passmore, J. Bennett, M. Radomsky, and Lee W. Saperstein
Reclamation, Lee W. Saperstein
A Knowledge-Based Expert System for Managing Underground Coal Mines in the U.S., H. Singh, S. Yuan, C. M. Watts, J. M. Dean, N. P. Reddy, R. S. Nutter Jr., and R. Larry Grayson
New, Generalized Criteria for Determining the Level of Underbalance for Obtaining Clean Perforations, Syed M. Tariq
The Design and Implementation of Graphic Support for the Mine Management Support System, V. Varada, H. Singh, and R. Larry Grayson
The Design and Implementation of a Work Scheduling System for the Mine Management, U. Varanasi, H. Singh, and R. Larry Grayson
Mixed-Mode Fracture Toughness Testing of Coal, R. Karl Zipf and Z. T. Bieniawski
Decreasing Coal Bump Risk Through Optimal Cut Sequencing with a Non-Linear Boundary Element Program, R. Karl Zipf and K. A. Heasley
Submissions from 1989
Quick Look Prestimulation Well Test, U. Ahmed, F. J. Husband, and Syed M. Tariq
Prediction of Surface Movement with Emphasis on Horizontal Deformation Due to Mining, M. Bai, D. Elsworth, and Lee W. Saperstein
Characteristic Surfaces For Three-position Function Generation With Planar Four-bar Mechanisms, Clark R. Barker and P. L. Tso
Aluminum Grinding with High Pressure Water Jet Assistance, J. Borkowski and Marian Mazurkiewicz
Efficient Use of Additives to Improve Pneumatically Emplaced Backfill Strength, M. J. Carlson and Lee W. Saperstein
Linear and Radial Flow Targets for Characterizing Downhole Flow in Perforations, M. Deo, Syed M. Tariq, and P. M. Halleck
Effectiveness of Coal Comminution by High Pressure Waterjet, Greg Galecki and Marian Mazurkiewicz
A Statistical Method for Evaluation of AE/MS Source Location Accuracy and Transducer Array Geometry, Mao Chen Ge and H. R. Hardy Jr.
Design of 3-Dimensional AE/MS Transducer Arrays-Theory and Strategy, Mao Chen Ge and H. R. Hardy Jr.
Modeling and Simulation of Mine Hoisting Operations, Tad S. Golosinski
Turning Resistance of Large Conveyor Idlers Lubricated with Dupont's Krytox, Tad S. Golosinski and W. Cholewa
Off-Highway Haulage in Surface Mines, Tad S. Golosinski and V. Srajer
Dynamic Programming Solution for the Optimal Allocation of Mine Manpower to Multiple Work Activities, R. Larry Grayson
Optimization of Longwall Panel Dimensions Using a Microcomputer, R. Larry Grayson
Knowledge-Based Expert System for Managing Underground Coal Mines, R. Larry Grayson, J. Dean, S. Yuan, N. P. Reddy, C. M. Watts, H. Singh, and R. S. Nutter Jr.
Computer and Software Use in the U.S. Coal Industry, R. Larry Grayson, M. Georgiana, J. M. Dean, L. Zhao, and Y. J. Wang
An Experimental Approach to the Determination of Explosible Lean Limits for Coal Dust and Methane Mixtures, B. Jensen, Stewart Gillies, P. Golledge, W. Urbanik, and R. Davis
Data-Based Coal Preparation Training, M. J. Klishis, R. Larry Grayson, G. M. Lies, and R. C. Althouse
Material Removal by Hydro-Abrasive High-Pressure Jet Mechanism Study, Marian Mazurkiewicz
Single Abrasive Particle and High Pressure Hydro-Abrasive Jet Performance Study, Marian Mazurkiewicz
Effect of Feed Rate During Comminution of Coal by High Energy Waterjet, Marian Mazurkiewicz, J. M. White, and P. Karlic
Analysis of US Surface Mining Law and Its Attitude Toward Land Use Planning, Lee W. Saperstein
The Orkneys Revisited, Lee W. Saperstein
Rate-Convolved Horner Plot for Analysis of Simultaneously Acquired Flow Rate and Pressure Data, Syed M. Tariq
Performance of Perforated Completions in the Presence of Anisotropy Laminations or Natural Fractures, Syed M. Tariq, M. J. Ichara, and L. Ayestaran
Effect of Moisture Content on Mechanical Properties of Nemo Coal, Moberly, Missouri U.S.A., J. M. White and Marian Mazurkiewicz
Investigation of DIAjet (Direct Injection of Abrasive Jet) Cutting of Granite, S. Yazici and David A. Summers
A Fundamental Study of Respirable Dust Generation in Coal, R. Karl Zipf and Z. T. Bieniawski
Submissions from 1988
Three-position Function Generation Of Planar Four-bar Mechanisms With Equal Deviation Transmission Angle Control, Clark R. Barker and Gwo Huey Shu
Three-position Function Generation Of Planar Four-bar Mechanisms With Equal Deviation Transmission Angle Control, Clark R. Barker and Gwo Huey Shu
Knowledge Organization and Inference Engine for the WVU Face Decision Support System, S. Carrow, R. S. Nutter Jr., R. S. Raman, N. A. Reddy, Y. V. Reddy, and R. Larry Grayson
Jet Cutting Technology, M. Corcoran, Marian Mazurkiewicz, and P. Karlic
Profitability: Sensitivity and Risk Analyses of the Sabi Gold Project, Samuel Frimpong
Optimization of Transducer Array Geometry for Acoustic Emission/Microseismic Source Location, Mao Chen Ge
The Mechanism of Array Geometry in the Control of AE/MS Source Location Accuracy, Mao Chen Ge and H. R. Hardy Jr.
The Mechanism of Array in the Control of AE/ME Source Location Accuracy. Key Questions in Rock Mechanics, Mao Chen Ge and H. R. Hardy Jr.
Advancing Coal Mine Ventilation into the Twenty First Century with High Productivity Mining Systems, Stewart Gillies
Operations-Based Training Strategy for Longwall Mining, R. Larry Grayson, Michael J. Klishis, Ronald C. Althouse, and George M. Lies
Integrated Approach to Production and Cost Management, R. Larry Grayson and Y. J. Wang
Disintegration of Wood, Marian Mazurkiewicz
Orthogonal Turning with High Pressure Water Jet Assistance, Marian Mazurkiewicz and Z. Kubala
Developing a Nationwide Mine Injury Reporting System for the Personal Computer, D. L. Passmore, A. Shah, M. C. Radomsky, and Lee W. Saperstein
Improving Mandated Training Through On-Site Safety Services, M. C. Radomsky, Lee W. Saperstein, D. L. Passmore, and J. D. Bennett
Survey of Computer Models for Multiple Seam-Multiple System Surface Mine Operations in Mountainous Terrain, Lee W. Saperstein
Face Ventilation During Cross-Cut Development in a Room-And-Pillar Operation, Jerry C. Tien
Mechanical Stemming Construction for Blast Holes and Method of Use, Paul Nicholas Worsey
The Mechanics of Fine Fragment Formation in Coal, R. Karl Zipf
Estimating the Crush Zone Size under a Cutting Tool in Coal, R. Karl Zipf and Z. T. Bieniawski
Microscopic Studies of Fractures Generated under Mixed Mode Loading, R. Karl Zipf and Z. T. Bieniawski
Submissions from 1987
Characteristic Surfaces For Extreme Values Of Angular Velocity Ratio In Planar Four-bar Mechanisms, Clark R. Barker
Characteristic Surfaces For Three-position Motion Generation With Planar Four-bar Mechanisms, Clark R. Barker and J. Baumann
CHARACTERISTIC SURFACES FOR THREE-POSITION MOTION GENERATION WITH PLANAR FOUR-BAR MECHANISMS., Clark R. Barker and J. Baumann
Characteristic Surfaces For Three Position Function Generation With Planar Four Bar Mechanisms, Clark R. Barker and P. l. Tso
Dynamic Characteristics of Waterjets Generated from Oscillating Systems, W. Z. Ben, David A. Summers, and M. J. Tzeng
Hydroabrasive Cutting Head - Energy Transfer Efficiency, Greg Galecki and Marian Mazurkiewicz
Hydroabrasive Cutting Head-Energy Transfer Efficiency, Greg Galecki and Marian Mazurkiewicz
A Probabilistic Method for Mine Heat Prediction, Stewart Gillies
Geostatics for Prediction of Coal Washability Characteristics, Stewart Gillies, D. C. Cawte, K. D. Whitchurch, and D. Geoffrey
Continuous Surface Mining, Tad S. Golosinski
Selective Continuous Surface Miners, Tad S. Golosinski
Increasing Proficiency in Prep Plant Workers, R. Larry Grayson, R. C. Althouse, M. J. Klishis, and F. C. Brooks
Mine Modifications for Economic Survival - a Case Study, R. Larry Grayson, G. Mishra, and R. Wood
Recent Insight into Longwall Strata Movements Deduced from Subsidence Analysis, K. A. Heasley and Lee W. Saperstein
An Examination of Insulation Used on Mine Refrigeration Chilled Water Pipes, D. F. Howarth and Stewart Gillies
Diggability of Plains Overburden with Bucketwheel Excavators, R. M. Krzanowski and Tad S. Golosinski