Submissions from 2004
Metal Transfer in Arc Welding, Hai-Lung Tsai and P.-C. Wang
Transport Phenomena and their Effect on Weld Quality in GMA Welding of Aluminum Alloys, Hai-Lung Tsai, Pei-Chung Wang, and Hao Guo
Failure Analysis in Subsystem Design for Space Missions, Scott J. Uder, Robert B. Stone, and Irem Y. Tumer
Function based Risk Assessment and Failure Prediction for Unmanned Space Missions, Scott J. Uder, Robert B. Stone, and Irem Y. Tumer
Missile Longitudinal Autopilot Design using a New Model-Following Robust Neuro-Adaptive Controller, Nishant Unnikrishnan and S. N. Balakrishnan
Sustainable Design Through Flexible Product Evolution, Michael Van Wie, Robert B. Stone, and Daniel A. McAdams
Examination of Platform and Differentiating Elements in Product Design, Michael Van Wie, Robert B. Stone, Henri Thevenot, and Timothy W. Simpson
Cooperative Formation Flying with Hierarchical Control, Xiaohua Wang and S. N. Balakrishnan
Parametric Study on the Fuel Film Breakup of a Cold Start PFI Engine, Y-P. Wang, J. A. Drallmeier, and Galen B. Wilkinson
The Influence of Residual Stress on Micromachine Stiction, Kai-tak Wan and Lior Kogut
Interdisciplinary Learning through a Connected Classroom, Steve Eugene Watkins, Richard H. Hall, K. Chandrashekhara, and Julie M. Baker
Dynamic Response of Laminated Glass under Blast Loading: Effect of Negative Phase, Jun Wei and Lokeswarappa R. Dharani
Flexural Capacity of RC Beams Externally Bonded with SRP and SRG, Erin N. Wobbe, Pedro Franco Silva, Antonio Nanni, Jeffery S. Thomas, G. Tunis, Victor Birman, Tarek Alkhrdaji, Bryce L. Barton, and Lokeswarappa R. Dharani
Control of the Wing Rock Motion Using a New Suboptimal Control Method, Ming Xin and S. N. Balakrishnan
Deep-Space Spacecraft Formation Flying using Θ-D Control, Ming Xin, S. N. Balakrishnan, and Henry J. Pernicka
Stationkeeping of an L₂ Libration Point Satellite with θ-D Technique, Ming Xin, S. N. Balakrishnan, Henry J. Pernicka, and Michael W. Dancer
Spacecraft Position and Attitude Control with Theta-D Technique, Ming Xin, S. N. Balakrishnan, and Donald T. Stansbery
Nonlinear Missile Autopilot Design with Θ - D Technique, Ming Xin, S. N. Balakrishnan, Donald T. Stansbery, and Ernest J. Ohlmeyer
Experimental Investigation of Soot Formation in Turbulent Hydrocarbon Flames, Bo Yang and Ümit Özgür Köylü
Giant Magnetoresistance Effect of Two-Dimensional Electron Gas Systems in a Periodically Modulated Magnetic Field, Xiaodong Yang, R.-Z. Wang, Y. Guo, W. Yang, D.-B. Yu, B. Wang, and H. Yan
Shape Effect on the Performance of Carbon FRP Wraps, Xinbao Yang, Jun Wei, Antonio Nanni, and Lokeswarappa R. Dharani
Automatic Feedback Control of Mechanical Gas Face Seals Via Clearance Control, Sachin S. Yelma, Robert G. Landers, and Brad A. Miller
Failure Modes of Glass Panels Subjected to Soft Missile Impact, Jiaqing Yu and Lokeswarappa R. Dharani
Modeling Fracture in Laminated Automotive Glazing Impacted by Spherical Featureless Headform, Shuangmei Zhao, Li Chai, Sridhar Reddy Mettu, S. D. Barbat, and Lokeswarappa R. Dharani
Melt Flow and Porosity Formation in Pulsed Laser Keyhole Welding, Jia Zhou, Hai-Lung Tsai, R. Menassa, and Pei-Chung Wang
Transport Phenomena and Defect Formation in Laser Welding of Zinc-Coated Steels, Jia Zhou, Hai-Lung Tsai, and Pei-Chung Wang
Investigation of Mixing Phenomena in Hybrid Laser-MIG Keyhole Welding, J. Zhou, Hai-Lung Tsai, and P.-C. Wang
A Comprehensive Model on the Transport Phenomena During Gas Metal Arc Welding Process, F. L. Zhu, Hai-Lung Tsai, S. P. Marin, and P.-C. Wang
Curing and Mechanical Characterization of Soy-Based Epoxy Resin System, Jiang Zhu, K. Chandrashekhara, V. J. Flanigan, and Shubhender Kapila
Submissions from 2003
Measurements of Turbulent Mixed Convection Flow Over a Vertical Forward-Facing Step, Bassem F. Armaly, H. I. Abu-Mulaweh, and T. S. Chen
Buoyancy Effects on Three-Dimensional Convection Flow Adjacent to Backward-Facing Step, Bassem F. Armaly and Bassem F. Armaly
Measurements in Three-Dimensional Laminar Separated Flow, Bassem F. Armaly, An Li, and J. H. Nie
Multidimensional, Time-Accurate CFD Simulation of Adsorption/desorption in a Carbon Canister, Xingyan Bai, Kakkattukuzhy M. Isaac, D. Klein, R. Banerjee, J. Edson, W. Breig, and L. Oliver
Evaluation of Turbulence Closure Scheme for Stratified Two Phase Flow, R. Banerjee and Kakkattukuzhy M. Isaac
Enhanced Practical Photosynthetic CO₂ Mitigation, David J. Bayless, Morgan LeFay Vis-Chiasson, and Gregory G. Kremer
Design of a Closed-Loop Controller for Mitigation of Torque Ripple in a Brushless DC Machine, P. Beccue, Steven Pekarek, J. Neely, and Daniel S. Stutts
How to Establish Successful Cooperative Student Learning Centers for STEM Courses, Ronald James Bieniek, Douglas R. Carroll, Cesar Mendoza, Oran Allan Pringle, Ekkehard Sinn, Kai-Tak Wan, and Donald C. Wunsch
Impact Of Bar Code Print Quality On The Performance Of High-speed Sortation Systems, Richard E. Billo, J. David Porter, Mainak Mazumdar, and Stephen J. Brown
Damping in Ceramic Matrix Composites with Matrix Cracks, Victor Birman and Larry W. Byrd
Modeling for the Control of the Laser Aided Manufacturing Process (LAMP), Mallikharjuna R. Boddu, Vishnu P. Thayalan, and Robert G. Landers
Modeling and Control of a Microscale Robotic Deposition Manufacturing System, Douglas A. Bristow
A Manufacturing System for Microscale Robotic Deposition, Douglas A. Bristow and Andrew G. Alleyne
A Study on Effects of Process Parameters in Rapid Freeze Prototyping, Frances D. Bryant, Guanghua Sui, and Ming-Chuan Leu
Structural Properties of Recycled HDPE Plastic Lumber Decking Planks, Douglas R. Carroll, Robert B. Stone, Anthony M. Sirignano, Rosanna M. Saindon, Stephen C. Gose, and Marc A. Friedman
Manufacturing and Mechanical Properties of Soy-Based Composites Using Pultrusion, K. Chandrashekhara, Shubhender Kapila, Jiang Zhu, and V. J. Flanigan
Modeling and Experimental Testing of a Smart Composite Bridge, K. Chandrashekhara, Antonio Nanni, Steve Eugene Watkins, and Prakash Kumar
Signal Mast Arm Fatigue Failure Investigation, Genda Chen, Michael G. Barker, Lokeswarappa R. Dharani, and Christopher W. Ramsay
Mini-Lab Projects in the Undergraduate Classical Controls Course, Jeffrey S. Dalton, Daniel S. Stutts, and Robert Montgomery
Hierarchical Optimal Control of a Turning Process - Linearization Approach, Anand Dasgupta, B. Pandurangan, Robert G. Landers, and S. N. Balakrishnan
Modeling Fracture in Laminated Automotive Glazing Impacted by Spherical Featureless Headform, Lokeswarappa R. Dharani, S. R. Mettu, S. Zhao, S. D. Barbat, and L. Chai
Saturation of Transverse Cracking with Delamination in Polymer Cross-Ply Composite Laminates, Lokeswarappa R. Dharani, Jun Wei, Fangsheng Ji, and J. H. Zhao
Experimental Evaluation of the Probe Test for Measuring Thin Film Adhesion, David A. Dillard, Caleb Scott, Kris Mount, Dingying Xu, Kai Tak Wan, Robert West, and John G. Dillard
Hydrocarbon Absorption Coefficients At the 3.39-Μm He-Ne Laser Transition, J. A. Drallmeier
Intelligent Strain Sensing on a Smart Composite Wing using Extrinsic Fabry-Perot Interferometric Sensors and Neural Networks, Rohit Dua, Vicki Eller, Kakkattukuzhy M. Isaac, Steve E. Watkins, and Donald C. Wunsch
An Integrated Framework for Probabilistic Optimization Using Inverse Reliability Strategy, Xiaoping Du, Agus Sudjianto, and Wei Chen
Toward Automatic Process Planning of a Multi-Axis Hybrid Laser Aided Manufacturing System: Skeleton-Based Offset Edge Generation, Kunnayut Eiamsa-ard, Frank W. Liou, Robert G. Landers, and H. Choset
Algorithm for Autonomous Longitude and Eccentricity Control for Geostationary Spacecraft, B. P. Emma and Henry J. Pernicka
Effect of Acyl Chain Mismatch on the Contact Mechanics of Two-Component Phospholipid Vesicle during Main Phase Transition, Ning Fang, Alvin Chi Keung Lai, Kai Tak Wan, and Vincent Chan
Enumerating the Component Space: First Steps toward a Design Naming Convention for Mechanical Parts, James L. Greer, Michael E. Stock, Robert B. Stone, and Kristin L. Wood
Numerical Modeling of Laser Repair Process and Stress Analysis, Lijun Han and Frank W. Liou
Quantum Confined Stark Effect in GaInNAs/GaAs Multiple Quantum Wells, J. B. Heroux, Xiaodong Yang, and W. I. Wang
Integral Solutions for Transient Temperature Profiles in Stably-Stratified Open Enclosures, Kelly Homan
Internal Entropy Generation Limits for Direct Sensible Thermal Storage, Kelly Homan
Remarks on Cfd Simulation Uncertainties, Serhat Hosder, Bernard Grossman, Raphael T. Haftka, William H. Mason, and Layne T. Watson
Soot Measurements At the Axis of an Ethylene/Air Non-Premixed Turbulent Jet Flame, Bing Hu, Bo Yang, and Ümit Özgür Köylü
Fluid Flow and Weld Pool Dynamics in Dual-Beam Laser Keyhole Welding, J. Hu and Hai-Lung Tsai
Modeling of Weld Pool Dynamics during Dual-Beam Laser Welding Process, J. Hu, Hai-Lung Tsai, and Y. K. Lee
Low Re, High Α Aerodynamics with Controlled Wing Kinematics, Kakkattukuzhy M. Isaac, P. Shivaram, and T. Dalbello
Intelligent Strain Sensing on a Smart Composite Wing using Extrinsic Fabry-Perot Interferometric Sensors and Neural Networks, Kakkattukuzhy M. Isaac, Donald C. Wunsch, Steve Eugene Watkins, Rohit Dua, and V. M. Eller
Comparison of Anode and Electrolyte Support Configuration of Single Chamber Solid Oxide Fuel Cell, Piotr Z. Jasinski, Toshio Suzuki, Zach Byars, Fatih Dogan, and Harlan U. Anderson
The Use of Metamodeling Techniques for Optimization under Uncertainty, Ruichen Jin, Xiaoping Du, and Wei Chen
Solvent and Method for Extraction of Triglyceride Rich Oil, Shubhender Kapila, Paul Ki-souk Nam, and V. J. Flanigan
Forecasting Manufacturing Quality and Optimizing Product Robustness Using Process Capability Data, Daniel Kern, Xiaoping Du, and Agus Sudjianto
Robust Machining Force Control with Process Compensation, Sung I. Kim, Robert G. Landers, and A. Galip Ulsoy
Experimental Studies Assessing the Repeatability of a Functional Modeling Derivation Method, Mark A. Kurfman, Michael E. Stock, Robert B. Stone, Jagan Rajan, and Kristin L. Wood
Investigation of Customer Needs Frequency vs.. Weight in Product Platform Planning, Ravindra M. Kurtadikar and Robert B. Stone
Process Control of Laser Metal Deposition Manufacturing -- A Simulation Study, Robert G. Landers
Control and Control-Oriented Modeling of Manufacturing Machines, Processes, and Systems: Introduction, Robert G. Landers and L. K. Saunders
Cure Characterization of Pultruded Soy-Based Composites, G. Liang, A. Garg, J. Zhu, K. Chandrashekhara, V. J. Flanigan, and Shubhender Kapila
Cure Characterization of Pultruded Soy-Based Composites, Guozheng Liang, Arun Garg, Jiang Zhu, K. Chandrashekhara, V. J. Flanigan, and Shubhender Kapila
An Integrated and Distributed Environment for a Manufacturing Capstone Course, Frank W. Liou, Rajiv S. Mishra, Ashok Agrawal, Venkat Allada, Ming-Chuan Leu, and Anthony Chukwujekwu Okafor
Fabrication of Dental Crowns by Investment Casting with Rapid Freeze Prototyping Generated Ice Patterns, Qingbin Liu and Ming-Chuan Leu
Study of Part Geometric Features and Support Materials in Rapid Freeze Prototyping, Qingbin Liu, Ming-Chuan Leu, and Frances D. Bryant
Molecular Dynamics Simulation of Friction for MEMS Application, Amlesh Lutade and K. Krishnamurthy
The Graves Condition for Incompressible Finite Elasticity, G. P. MacSithigh
Identification and Codification of Principles for Functional Tolerance Design, Daniel A. McAdams
Automated Manufacturabilty Analysis for Injection-Molded and Die-Cast Parts, Daniel A. McAdams and Rahul A. Bidkar
Developing Variational Vibration Models of Damaged Beams: toward Intelligent Failure Detection, Daniel A. McAdams, David Comella, and Irem Y. Tumer
Design of a Closed-loop Controller for Mitigation of Torque Ripple in a Brushless DC Machine, N. Navapan-Traiphol, Robert W. Schwartz, Daniel S. Stutts, and J. Wood
Utilization of a Piezoelectric Polymer to Sense Harmonics of Electromagnetic Torque, Jason Neely, Steven Pekarek, Daniel S. Stutts, and Philip Beccue
Reattachment of Three-Dimensional Flow Adjacent to Backward-Facing Step, J. H. Nie and Bassem F. Armaly
Three-Dimensional Forced Convection Flow in Plane Symmetric Sudden Expansion, J. H. Nie and Bassem F. Armaly
Signature Recognition and Verification with ANN Using Moment Invariant Method, Cemil Oz and Fikret Erçal
Signature Recognition and Verification with ANN, Cemil Oz, Fikret Erçal, and Zafer Demir
Approximate Dynamic Programming Based Optimal Neurocontrol Synthesis of a Chemical Reactor Process Using Proper Orthogonal Decomposition, Radhakant Padhi and S. N. Balakrishnan
Implementation of Pilot Commands in Aircraft Control: A New Approach based on Dynamic Inversion, Radhakant Padhi and S. N. Balakrishnan
Optimal Process Control Using Neural Networks, Radhakant Padhi and S. N. Balakrishnan
Proper Orthogonal Decomposition Based Optimal Neurocontrol Synthesis of a Chemical Reactor Process Using Approximate Dynamic Programming, Radhakant Padhi and S. N. Balakrishnan
Bone Surgery Simulation with Virtual Reality, Xiaobo Peng, Xiaoyi Chi, Jorge A. Ochoa, and Ming-Chuan Leu
Design and Test of a Tethered Pair of Satellites: Equipment Requirements, Henry J. Pernicka
