The Faculty Research & Creative Works series collects scholarly and creative work by Missouri S&T's faculty and professional staff. To find works from a specific department, center, or program, browse by Programs, Centers, and Departments. To browse content in this series by author, use the link below:
Browse by Faculty AuthorSubmissions from 2004
Self-Drilling Screw Joints for Cold-Formed Channel Portal Frames, Julie Mills and Roger A. LaBoube
Friction Stir Processing for Superplasticity, Rajiv S. Mishra
Metal Superplasticity Enhancement and Forming Process, Rajiv S. Mishra and Murray W. Mahoney
Multidisciplinary Treatment of Posterior Circulation Ischemia, Mukesh Misra, M. S. Alp, D. (Daniel) Hier, and J. I. Ausman
Enhancing the Teaching of Fluid Mechanics and Transport Phenomena Via Flowlab: A Computational Fluid Dynamics Tool, Shane Moeykens, Murali Krishnan, Kimberly H. Henthorn, and Jennifer S. Curtis
Electrical Conductivity and Relaxation in MoO₃-Fe₂O₃-P₂O₅ Glasses, Andrea Moguš-Milanković, Mevlüt Karabulut, A. Šantić, and D. E. Day
Study of Electrical Properties of MoO₃-Fe₂O₃-P₂O₅ and SrO-Fe₂O₃-P₂O₅ Glasses by Impedance Spectroscopy. II, Andrea Moguš-Milanković, Mevlüt Karabulut, A. Šantić, and D. E. Day
Mixed Ion-Polaron Transport in Na₂O-PbO-Fe₂O₃₋ P₂O₅ Glasses, Andrea Mogus-Milankovic, Ana Santic, Signo Tadeu Dos Reis, Kresimir Furic, and D. E. Day
Intelligent Control Schemes for a Static Compensator Connected to a Power Network, Salman Mohagheghi, Ganesh K. Venayagamoorthy, and Ronald G. Harley
Modified Takagi-Sugeno Fuzzy Logic Based Controllers for a Static Compensator in a Multimachine Power System, Salman Mohagheghi, Ganesh K. Venayagamoorthy, and Ronald G. Harley
Supervisory Level Neural Network Identifier for a Small Power System with a STATCOM and a Generator, Salman Mohagheghi, Ganesh K. Venayagamoorthy, and Ronald G. Harley
Middle Cerebral Artery Disease, J. P. Mohr, Ronald M. Lazar, Randolph S. Marshall, and Daniel B. Hier
Attractors for Noncompact Nonautonomous Systems Via Energy Equations, Ioana Moise, Ricardo Rosa, and Xiaoming Wang
The Structure of the High-energy Spin Excitations in a High-transition-temperature Superconductor, H. A. Mook, Pengcheng Dai, Fatih Dogan, T. G. Perring, and S. M. Hayden
Polarized Neutron Measurement of Magnetic Order in YBa₂Cu₃O6₆.₄₅, H. A. Mook, Pengcheng Dai, S. M. Hayden, A. Hiess, S. H. Lee, and Fatih Dogan
Determining Suitability of a Fly Ash for Silica Extraction and Zeolite Synthesis, Natàlia Moreno, Xavier Querol, Angel López-Soler, José Manuel Andres, Maria Janssen, Henk Nugteren, Mark R. Towler, and Kenneth Stanton
Geometric Design of a Mass Transfer Sensor for Measuring Pollutant Transport in Indoor Air, Glenn Morrison and A. B. Srirama
The Influence of Temperature, Humidity and Changing Conditions on the Measurement of Mass Transfer Coefficients in Indoor Air, Glenn Morrison, Deborah J. Wiseman, and P. Zhao
A Study of Design Procedures for Augered Cast-In-Place-Piles in Clay, Jess Moss and Richard Wesley Stephenson
Parallel Hash-Based EST Clustering Algorithm for Gene Sequencing, Rameshreddy Mudhireddy, Fikret Erçal, and Ronald L. Frank
Conformational Changes of Peptides at Solid/Liquid Interfaces: A Monte Carlo Study, Amol A. Mungikar and Daniel Forciniti
Microwave Reflection Properties of Mortar Possessing a Cyclically Ingressed Sodium Chloride Profile, Kristen M. Munoz, Bharath Akuthota, Eric Gallaher, and R. Zoughi
Susceptibility Characterization of a Cavity with an Aperture by using Slowly Rotating EM Fields: FDTD Analysis and Measurements, Kimitoshi Murano, Takeshi Sanpei, Fengchao Xiao, Chen Wang, Yoshio Kami, and James L. Drewniak
An Examination of the Differences in Restaurant Brand Personality Across Cultures, Hanako Murase and David Bojanic
Successfully Blending Distance Students into the On-Campus Classroom, Susan L. Murray, David Lee Enke, and Sreeram Ramakrishnan
Using Dynamic Segmentation to Create Home Ranges for Aquatic Species, Eylem Mutlu and Ronaldo Luna
Blast Resistance of Fiber Reinforced Polymer (FRP) Retrofitted Un-Reinforced Masonry (URM) Walls with and Without Arching Action, John J. Myers, Abdeldjelil Belarbi, and Khaled A. El-Domiaty
Blast Resistance of Un-Reinforced Masonry Walls Retrofitted with Fiber Reinforced Polymers, John J. Myers, Abdeldjelil Belarbi, and Khaled A. El-Domiaty
Empirical Modeling of Surface Crack Detection in Concrete using an Open-Ended Rectangular Waveguide, Jagadish Nadakuduti, R. Zoughi, and Genda Chen
Early Dolomitization and Fluid Migration through the Lower Carboniferous Carbonate Platform in the SE Irish Midlands: Implications for Reservoir Attributes, Zsolt Nagy, Jay M. Gregg, Kevin L. Shelton, Stephen Paul Becker, Ian D. Somerville, and A. W. Johnson
Integrated Micro-Nano Level Interdisciplinary Manufacturing Engineering Education for Mems Development, Hari Janardanan Nair and Frank W. Liou
Power Flow and Stability Models for Induction Generators Used in Wind Turbines, Kiran K. Nandigam and Badrul H. Chowdhury
Renormalization-Group Analysis of the Generalized Sine-Gordon Model and of the Coulomb Gas for D > 3 Dimensions, I. Nandori, Ulrich D. Jentschura, Kornel Sailer, and Gerhard Soff
Shear Strengthening of a PC Bridge with NSM CFRP Rectangular Bars, Antonio Nanni, Marco Di Ludovico, and Renato Parretti
Chemical Routes to GeS₂ and GeSe₂ Nanowires, Manashi Nath, Amitava Choudhury, and Chintamani Nagesa Ramachandra Rao
Nanoparticles Produced by Laser Ablation of HfS₃ in Liquid Medium: Inorganic Fullerene-like Structures of Hf₂, Manashi Nath, Chintamani Nagesa Ramachandra Rao, Ronit Popovitz-Biro, Angi Albu-Yaron, and Reshef Tenne
Characterization and Modeling of Local Electromechanical Response in Stress-Biased Piezoelectric Actuators, N. Navapan-Traiphol, Robert W. Schwartz, Daniel S. Stutts, and J. Wood
Thermodynamic Properties of Moist Air: -40 to 400 C, Harlan F. Nelson and Harry J. Sauer Jr.
Interfacial Stability of Electrodeposition of Cuprous Oxide Thin Films, Partho Neogi
Causes of Variations in the Mechanical Properties of P/M Steels, Joseph William Newkirk
PM Manufacturing Research Boosted by Continuous Sintering Furnace, Joseph William Newkirk
PM Manufacturing Research Gets Boost with Continuous Sintering Furnace, Joseph William Newkirk
Convection in Laminar Three-Dimensional Separated Flow, J. H. Nie and Bassem F. Armaly
Boost Integrated Push-Pull Rectifier with Power Factor Correction and Output Voltage Regulation using a New Digital Control Technique, Zhong Nie, Mehdi Ferdowsi, and Ali Emadi
Blown-Sand Transport Rate, Jinren R. Ni, Zinshen S. Li, and Cesar Mendoza
Land Use and Stream Ecosystem Functioning: Nutrient Uptake in Streams That Contrast in Agricultural Development, Dev Niyogi, Kevin S. Simon, and Colin R. Townsend
Compaction Behavior of Argillaceous Sediments as Function of Diagenesis, Runar Nygaard, Marte S. Gutierrez, Rajeeb Gautam, and Kaare Hoeg
Influence of Burial History on Microstructure and Compaction Behaviour of Kimmeridge Clay, Runar Nygaard, Marte S. Gutierrez, Kaare Hoeg, and Knut O. Bjorlykke
TEM Studies of Cu₂O-Si and Cu₂O-InP Interfaces Made by Epitaxial Electrodeposition, Fumiyasu Oba, Run Liu, Y. Yu, Eric W. Bohannan, Frank Ernst, and Jay A. Switzer
Binary Nucleation of a Nonideal System from Classical and Density Functional Theories, Abdalla Obeidat, Jin-Song Li, and Gerald Wilemski
Nucleation Rates of Water and Heavy Water using Equations of State, Abdalla Obeidat, Jin-Song Li, and Gerald Wilemski
Nucleation of Polar Fluids from Gradient Theory, Abdalla Obeidat and Gerald Wilemski
Transient Modeling of Hyperfiltration Effects, Peter G. Oduor and Thomas M. Whitworth
Development of a Rapid Planning Technique Based on Heuristic Target Shaping for Stereotactic Radiosurgery, S. Oh, T.-S. Suh, J.-Y. Song, B.-Y. Choe, Hyoung-Koo Lee, M.-C. Kim, and T. Lee
Transient Stability Analysis Using Symplectic Integrators, Daniel Okunbor, Wilhelmina Djoleto, and Mariesa Crow
Self Diffusion of N,N-dimethylformamide in Polystyrene Solution Measured by Pulsed-field Gradient NMR, Macduff O. Okuom and Frank D. Blum
Three- and Four-Body Dynamics in Fast Heavy Ion-Atom Ionization, Ronald E. Olson and J. Fiol
Projectile Electron Loss and Capture in MeV/U Collisions of U²⁸⁺ with H₂, N₂ and Ar, Ronald E. Olson, R. L. Watson, V. Horvat, A. N. Perumal, Y. Peng, and Th. Stöhlker
Cut-On Cut-Off Transition in Flow Ducts: Comparing Multiple-Scales and Finite-Element Solutions, Nick C. Ovenden, Walter Eversman, and Sjoerd W. Rienstra
Nano 6H Diamond Polytype Polycrystalline Powder, P. D. Ownby
The Boron Trifluoride Nitromethane Adduct, P. D. Ownby
Fuel Cell Flow Field and Sub-component Development, P. D. Ownby and D. D. Burt
American Sign Language Word Recognition with a Sensory Glove Using Artificial Neural Networks, Cemil Oz, Neelesh Sarawate, and Ming-Chuan Leu
Nonrelativistic QED Approach to the Bound-Electron g Factor, Krzysztof Pachucki, Ulrich D. Jentschura, and Vladimir A. Yerokhin
Development and Analysis of a Feedback Treatment Strategy for Parturient Paresis of Cows, Radhakant Padhi and S. N. Balakrishnan
Optimal Beaver Population Management Using Reduced Order Distributed Parameter Model and Single Network Adaptive Critics, Radhakant Padhi and S. N. Balakrishnan
Model Following Robust Neuro-Adaptive Controller Design for Non-Square, Non-Affine Systems, Radhakant Padhi, Nishant Unnikrishnan, and S. N. Balakrishnan
Optimal Control Synthesis of a Class of Nonlinear Systems Using Single Network Adaptive Critics, Radhakant Padhi, Nishant Unnikrishnan, and S. N. Balakrishnan
Approach to Recognition of License Plate Numbers using Neural Networks, Ihor Paliy, Iryna V. Turchenko, Vasyl Koval, Anatoly O. Sachenko, and George Markowsky
Modeling of the Metal Powder Flow with Carrier Gas in Coaxial Nozzle for Direct Laser Deposition Process, Heng Pan and Frank W. Liou
Numerical and Experimental Study of Shielding Gas Orientation Effects on Particle Stream Concentration Mode in Coaxial Laser Aided Material Deposition Process, Heng Pan, Yogesh D. Thakar, and Frank W. Liou
Modeling the Wave Propagation Properties of Power Cables Using Numerical Simulations, R. Papazyan, David Pommerenke, and R. Eriksson
Indirect Adaptive Control for Synchronous Generator: Comparison of MLP/RBF Neural Networks Approach with Lyapunov Stability Analysis, Jung-Wook Park, Ronald G. Harley, and Ganesh K. Venayagamoorthy
New External Neuro-Controller for Series Capacitive Reactance Compensator in a Power Network, Jung-Wook Park, Ganesh K. Venayagamoorthy, and Ronald G. Harley
High Confidence Testing for Instrumentation System-on-Chip with Unknown-Good-Yield, N. J. Park, Bin Jin, Koshy M. George, Nohpill Park, and Minsu Choi
A Scalable Approach For Reliable Downstream Data Delivery In Wireless Sensor Networks, Seung Jong Park, Ramanuja Vedantham, Raghupathy Sivakumar, and Ian F. Akyildiz
Strengthening of RC Members Using Near-Surface Mounted FRP Composites: Design Overview, Renato Parretti and Antonio Nanni
Membrane Laminar Wet Electrostatic Precipitator, Hajrudin Pasic, M. Khairul Alam, and David J. Bayless
Characterization of Hydroxyl Content of Hydrothermal Barium Titanate Films, Sandeep K. Patil, Nipun Shah, Frank D. Blum, and M. N. Rahaman
Compositional Effects on Densification and Microstructural Evolution of Bismuth Titanate, Jaideep Suresh Patwardhan and M. N. Rahaman
Improved Pseudo-Rigid-Body Model Parameter Values for End-Force-Loaded Compliant Beams, Joby Pauly and Ashok Midha
Important Factors for Effective Slag Splashing, Kent D. Peaslee and Wei Chen
Thermal Efficiency of Steel Melting, Kent D. Peaslee, Semen Naumovich Lekakh, and Bradley Randall
An Electromagnetic Model for Evaluating Temporal Water Content Distribution and Movement in Cyclically Soaked Mortar, Shanup Peer, K. E. Kurtis, and R. Zoughi
Comparison of Water and Saltwater Movement in Mortar Based on a Semiempirical Electromagnetic Model, Shanup Peer and R. Zoughi
Surface Reconstruction from Dexel Data for Virtual Sculpting, Xiaobo Peng, Weihan Zhang, Sai Gowthami Asam, and Ming-Chuan Leu
Liquid Chromatography Analysis of N-(2-mercaptopropionyl)-glycine in Biological Samples by ThioGlo™ 3 Derivatization, Suman Penugonda, W. Wu, Suneetha Mare, and Nuran Ercal
Simulation of the Dynamics of a Short Tethered Satellite System, Henry J. Pernicka, A. Abrudan, J. Harrington, and Michael W. Dancer
Review of Progress in Developing Continuous Steelmaking, Jorg Annie Peter, Kent D. Peaslee, and D. G. C. Robertson
Study of Current Steelmaking Practices to Evaluate the Viability of Continuous Steelmaking, Jorg Annie Peter, Kent D. Peaslee, and D. G. C. Robertson
Thermomechanical Processing of HSLA Wide-Flange Steel Beams for Increased Core Toughness, Jörg Peter, Kent D. Peaslee, and Dhiren Panda
Application of Composite Technology for SOFCs, Vladimir Petrovsky, Tatiana Petrovsky, and Harlan U. Anderson
Optical Characterization of Ceramic Thin Films: Applications in Low-temperature Solid Oxide Fuel-Cell Materials Research, Vladimir Petrovsky, Tatiana Petrovsky, Harlan U. Anderson, and Brian P. Gorman
Low-temperature Processing of Thin-film Electrolyte for Electrochemical Devices, Vladimir Petrovsky, Toshio Suzuki, Piotr Z. Jasinski, Tatiana Petrovsky, and Harlan U. Anderson
Experimental and Simulation Study of Laser Aided Deposition Process using Image and Temperature Sensors, Kaushik Phatak, Lijun Han, and Frank W. Liou
Comprehensive Evaluation of Animated Instructional Software for Mechanics of Materials, Timothy A. Philpot and Richard H. Hall
Teaching the Superposition Method with Internet-Based Instructional Software, Timothy A. Philpot, Richard H. Hall, Ralph E. Flori, Nancy E. Hubing, and Vikas Yellamraju
A Magnetic and Mössbauer Spectral Study of PrFe₁₁Ti and PrFe₁₁TiH, Cristina Piquer, Fernande Grandjean, Olivier Isnard, Viorel Pop, and Gary J. Long
A Magnetic and Mössbauer Spectral Study of the Spin Reorientation in NdFe₁₁Ti and NdFe₁₁TH, Cristina Piquer, Fernande Grandjean, Olivier Isnard, Viorel Pop, and Gary J. Long
A Magnetic and ⁵⁷Fe Mössbauer Spectral Study of the Hf₍₁₋ₓ₎RₓFe₆Ge₆ (R = Gd and Dy) Compounds, Neculai Plugaru, Cristina Piquer, Fernande Grandjean, Javier Rubín, and Juan S. Bartolomé
