Transient Fluid Flow Phenomena during Continuous Casting: Part I-cast Start
Abstract
This work presents a three-dimensional numerical simulation of transient fluid flow phenomena during continuous casting of steel. in the Part I, the process of cast start was investigated. Cast start involved the filling process and the caster start process. in the filling process, molten steel was continuously filled into the mold cavity with surrounding mold walls and a dummy bar head at the bottom. to simulate the interface between the molten steel and the air, an algorithm of volume of fluid has been employed. in the cast start process, the dummy bar was gradually dragged out with a low casting speed. the movement of dummy bar was represented using dynamic mesh, and the moving speed of the boundary was controlled by a subroutine. the shape of the air/steel surface was tracked over the time, and the speed variation at a series of points close to the surface was monitored to reflect the fluctuation at top surface during cast start. © 2010 ISIJ.
Recommended Citation
Y. Wang and L. Zhang, "Transient Fluid Flow Phenomena during Continuous Casting: Part I-cast Start," ISIJ International, vol. 50, no. 12, pp. 1777 - 1782, Iron and Steel Institute of Japan, Dec 2010.
The definitive version is available at https://doi.org/10.2355/isijinternational.50.1777
Department(s)
Materials Science and Engineering
Publication Status
Free Access
Keywords and Phrases
Cast start; Movement of dummy bar; Slab continuous casting; Surface fluctuation
International Standard Serial Number (ISSN)
0915-1559
Document Type
Article - Conference proceedings
Document Version
Final Version
File Type
text
Language(s)
English
Rights
© 2024 Learned Society, All rights reserved.
Publication Date
01 Dec 2010