Follow


Submissions from 2019

Link

Analysis of Hot- and Cold-Rolled Loads in Medium-Mn TRIP Steels, M. F. Buchely, D. M. Field, and David C. Van Aken

Link

Modeling and Simulation of Dynamic Recrystallization Behavior in Alloyed Steel 15V38 during Hot Rolling, Xin Wang, K. Chandrashekhara, Semen Naumovich Lekakh, David C. Van Aken, and Ronald J. O'Malley

Submissions from 2018

Link

Two Inoculation Methods for Refining As-Cast Grain Structure in Austenitic 316L Steel, Dusint A. Arvola, Semen Naumovich Lekakh, Ronald J. O'Malley, and Laura Bartlett

PDF

Efficiency of Solid Inclusion Removal from the Steel Melt by Ceramic Foam Filter: Design and Experimental Validation, Soumava Chakraborty, Ronald J. O'Malley, Laura Bartlett, and Mingzhi Xu

Link

Chemistry and Properties of Medium-Mn Two-Stage TRIP Steels, Daniel M. Field, Jingjing Qing, and David C. Van Aken

Link

Dynamic Strain Aging Phenomena and Tensile Response of Medium-Mn TRIP Steel, Daniel M. Field and David C. Van Aken

Submissions from 2017

PDF

Factors Affecting the Evolution of Inclusion Populations during Steelmaking and Casting Processes, Obinna Adaba, Laura Bartlett, Mingzhi Xu, and Ronald J. O'Malley

Link

On the Prediction of α-Martensite Temperatures in Medium Manganese Steels, Daniel M. Field, Daniel S. Baker, and David C. Van Aken

PDF

Control of Columnar to Equiaxed Transition in Solidification Macrostructure of Austenitic Stainless Steel Castings, Semen Naumovich Lekakh, Ronald J. O'Malley, Mark C. Emmendorfer, and Brenton Hrebec

Submissions from 2016

PDF

Computational Fluid Dynamics Study of Molten Steel Flow Patterns and Particle-Wall Interactions Inside a Slide-Gate Nozzle by a Hybrid Turbulent Model, Mahdi Mohammadi-Ghaleni, Mohsen Asle Zaeem, Jeffrey D. Smith, and Ronald J. O'Malley

Link

Thermodynamic Driving Force of the γ → ε Transformation and Resulting Mₛ Temperature in High-Mn Steels, S. T. Pisarik and David C. Van Aken

Submissions from 2015

PDF

Evolution of Non-Metallic Inclusions in Foundry Steel Casting Processes, Marc Harris, Von Richards, Ronald J. O'Malley, and Semen Naumovich Lekakh

Link

High Strain Rate Hot Deformation of Steels: Measurement and Simulation, Seth A. Rummel, David C. Van Aken, Ronald J. O'Malley, X. Wang, and K. Chandrashekhara

Submissions from 2014

Link

First-Principles Study of Mn, Al and C Distribution and their Effect on Stacking Fault Energies in Fcc Fe, N. I. Medvedeva, M. S. Park, David C. Van Aken, and Julia E. Medvedeva

Submissions from 2013

Link

Dynamic Fracture Toughness of High Strength Cast Steels, Laura Bartlett, Amla Dash, David C. Van Aken, Von Richards, and Kent D. Peaslee

Crack Formation during Foam Pattern Firing in the Investment Casting Process, W. A. Everhart, Semen Naumovich Lekakh, Von Richards, J. Chen, and K. Chandrashekhara

Corner Strength of Investment Casting Shells, W. A. Everhart, Semen Naumovich Lekakh, Von Richards, J. Chen, H. Li, and K. Chandrashekhara

Submissions from 2012

Link

A Cyclic Forward-Backward Extrusion Process as a Novel Severe Plastic Deformation for Production of Ultrafine Grains Materials, Hamid Alihosseini, Mohsen Asle Zaeem, and Kamran Dehghani

Link

Effects of Internal Stresses and Intermediate Phases on the Coarsening of Coherent Precipitates: A Phase-Field Study, Mohsen Asle Zaeem, Haitham El Kadiri, Mark Fredrick Horstemeyer, Marat Khafizov, and Zhandos N. Utegulov

Importance of Advanced High-Strength Steels and Electronic Units on the Recycling of Automobiles: A Review, Kyle Bevans, Matthew Chott, Brandon Ensor, Jamie Fitzgerald, Stephanie Martin, Kent D. Peaslee, Scott Pisarik, Luke S. Walker, Matthew Wilson, and Lifeng Zhang

Link

Study of Void Closure in Hot Radial Forging Process Using 3D Nonlinear Finite Element Analysis, J. Chen, K. Chandrashekhara, Chirag Mahimkar, Semen Naumovich Lekakh, and Von Richards

Link

On Laser Welding of Thin Steel Sheets, Emad M. El-Giar, Mohsen Asle Zaeem, Haitham El Kadiri, R. S. Florea, Hongjoo Rhee, Yves Bienvenu, Martin Dahmen, Thierry Malot, and Mohammed Zoubaïr Cherkaoui

Link

Dissolution of Cerium from Cerium-Based Conversion Coatings on Al 7075-T6 in 0.1M NaCl Solutions, Simon Joshi, Elizabeth A. Kulp, William Fahrenholtz, and Matthew O'Keefe

On the Crystallography of Peritectic Austenite and the Role of Primary Ferrite in High Manganese and Aluminum Steels, Meghan C. McGrath and David C. Van Aken

Link

Copper Precipitation in Cobalt-Alloyed Precipitation-Hardened Stainless Steel, Arpana S. Murthy, Julia E. Medvedeva, Dieter Isheim, Semen Naumovich Lekakh, Von Richards, and David C. Van Aken

Novel Modeling Concept for Vacuum Tank Degassing, Vivek Thapliyal, Semen Naumovich Lekakh, Kent D. Peaslee, and D. G. C. Robertson

Link

Inverse Modeling for Determination of Thermal Properties of the Investment Casting Ceramic Mold, Mingzhi Xu, Semen Naumovich Lekakh, Von Richards, and Shelly A. Dutler

Link

Formation and Modification of MgO·AI₂O₃-Based Inclusions in Alloy Steels, Shufeng Yang, Qiangqiang Wang, Lifeng Zhang, Jing-she Li, and Kent D. Peaslee

Investigation on MgO·AI₂O₃-Based Inclusions in Steels, Shu-feng Yang, Lifeng Zhang, Liyuan Sun, Jing-she Li, and Kent D. Peaslee

Link

Fluid Flow, Solidification and Inclusion Entrapment during Steel Centrifugal Casting Process, Lifeng Zhang, Yufeng Wang, Edith Martinez, and Kent D. Peaslee

Submissions from 2011

Link

Effect of the Compositional Strain on the Diffusive Interface Thickness and on the Phase Transformation in a Phase-Field Model for Binary Alloys, Mohsen Asle Zaeem, Haitham El Kadiri, Sinisa DJ Mesarovic, Mark Fredrick Horstemeyer, and Paul T. Wang

Link

Investigating the Effects of Grain Boundary Energy Anisotropy and Second-Phase Particles on Grain Growth using a Phase-Field Model, Mohsen Asle Zaeem, Haitham El Kadiri, Paul T. Wang, and Mark Fredrick Horstemeyer

Link

Void Closure Prediction in Cold Rolling Using Finite Element Analysis and Neural Network, J. Chen, K. Chandrashekhara, Chirag Mahimkar, Semen Naumovich Lekakh, and Von Richards

Link

Improved Furnace Efficiency through the Use of Refractory Materials, James Gordon Hemrick, Angela Rodrigues-Schroer, D. Colavito, and Jeffrey D. Smith

Link

The Effect of Carbon Distribution on the Manganese Magnetic Moment in Bcc Fe-Mn Alloy, N. I. Medvedeva, David C. Van Aken, and Julia E. Medvedeva

Link

On the Homogenization of Cobalt Modified 17-4 PH Stainless Steel, Arpana S. Murthy, Semen Naumovich Lekakh, Von Richards, and David C. Van Aken

Link

Process Simulation and Economic Feasibility Analysis for a Hydrogen-Based Novel Suspension Ironmaking Technology, Haruka K. Pinegar, Michael S. Moats, and Hong Yong Sohn

Fluid Flow and Steel Cleanliness in a Continuous Casting Tundish and Mold, Shu-feng Yang, Lifeng Zhang, Jing-she Li, and Kent D. Peaslee

Submissions from 2010

A Review of the Physical and Mechanical Properties of a Cast High Strength and Lightweight Fe-Mn-Al-C Steel, Laura Bartlett, Axel M. Schulte, David C. Van Aken, Kent D. Peaslee, and Ryan A. Howell

Link

Three-Dimensional Nonlinear Finite Element Analysis of Hot Radial Forging Process for Large Diameter Tubes, J. Chen, K. Chandrashekhara, Von Richards, and Semen Naumovich Lekakh

Link

The Effect of Post-Treatment Time and Temperature on Cerium-Based Conversion Coatings on Al 2024-T3, Daimon K. Heller, William Fahrenholtz, and Matthew O'Keefe

Tensile, High Strain Rate Compression and Microstructural Evaluation of Lightweight Age Hardenable Cast Fe-30Mn-9Al-XSi-0.9c-0.5Mo Steel, Ryan A. Howell, T. Weerasooriya, and David C. Van Aken

Fe-Mn-Al-C Austenitic Steels Treated by Ca and Ce, Semen Naumovich Lekakh, Von Richards, Axel M. Schulte, and David C. Van Aken

Effect of Cerium on the Inoculation of Acicular Ferrite in Hot-Rolled Fe-Mn-Al-Si-C Steel, Meghan C. McGrath, David C. Van Aken, and Von Richards

Mechanical Properties and their Dependence on Microstructure in Hot-Rolled 3rd Generation Advanced High Strength Steels, Meghan C. McGrath, David C. Van Aken, and Von Richards

Link

Magnetism in Bcc and Fcc Fe with Carbon and Manganese, N. I. Medvedeva, David C. Van Aken, and Julia E. Medvedeva

Microstructure and Properties of NB, V and N Modified CB7CU-1 (17-4 PH) Steel, Arpana S. Murthy, Semen Naumovich Lekakh, Von Richards, and David C. Van Aken

Effects of Steel Processing on Property Variations in Eglin Steel (ES-1), Andrew O'Loughlin, Edwin Y. Martinez, Kent D. Peaslee, and Semen Naumovich Lekakh

Link

Formation of Subsurface Crevices in Aluminum Alloy 2024-T3 during Deposition of Cerium-Based Conversion Coatings, William R. Pinc, Surender Maddela, Matthew O'Keefe, and William Fahrenholtz

Age Strengthening of Cast Irons: Review of Research and Literature, Jared Teague and Von Richards

Link

Characterization of Localized Surface States of Al 7075-T6 during Deposition of Cerium-Based Conversion Coatings, Becky L. Treu, Simon Joshi, William R. Pinc, Matthew O'Keefe, and William Fahrenholtz

Submissions from 2009

Link

Screening Study of Spray Solution Parameters for Depositing Cerium-Based Conversion Coatings on Al Alloy 2024-T3, Shujiang Geng, Pu Yu, Matthew O'Keefe, William Fahrenholtz, and Thomas J. O'Keefe

Link

The Effect of Phosphate Source on the Post-Treatment of Cerium based Conversion Coatings on Al 2024-T3 and its Correlation to Corrosion Performance, Daimon K. Heller, William Fahrenholtz, and Matthew O'Keefe

Quench Sensitivity of Cast Fe-30mn-9Al-1Si-0.9c-0.50mo Lightweight Steel, Ryan A. Howell, Semen Naumovich Lekakh, and David C. Van Aken

Advancements in Steel for Weight Reduction of P900 Armor Plate, Ryan A. Howell, J. S. Montgomery, and David C. Van Aken

A Literature Review of Age Hardening Fe-Mn-Al-C Alloys, Ryan A. Howell and David C. Van Aken

Thermo-Chemistry of Non-Metallic Inclusions in Ductile Iron, Semen Naumovich Lekakh, Von Richards, and Kent D. Peaslee

Link

Effects of Acid and Alkaline based Surface Preparations on Spray Deposited Cerium based Conversion Coatings on Al 2024-T3, William R. Pinc, Matthew O'Keefe, Thomas J. O'Keefe, William Fahrenholtz, and Shujiang Geng

Link

Effect of Gelatin Additions on the Corrosion Resistance of Cerium based Conversion Coatings Spray Deposited on Al 2024-T3, William R. Pinc, Pu Yu, Matthew O'Keefe, and William Fahrenholtz

Investigation of Carbonic Anhydrase Assisted Carbon Dioxide Sequestration using Steelmaking Slag, C. Hank Rawlins, Semen Naumovich Lekakh, Kent D. Peaslee, and Von Richards

Optimization of Calcium Treatment to Improve Cleanliness of Cast Steel, Varsha I. Singh, Semen Naumovich Lekakh, Edwin Y. Martinez, and Kent D. Peaslee

Link

Behavior of MgO·AI₂O₃ based Inclusions in Alloy Steel during the Refining Process, Shu-feng Yang, Jing-she Li, Lifeng Zhang, Kent D. Peaslee, and ZaiFei Wang

Link

Structure Optimization of Horizontal Continuous Casting Tundishes using Mathematical Modeling and Water Modeling, Shufeng Yang, Lifeng Zhang, Jing-she Li, and Kent D. Peaslee

Fluid Flow and Steel Cleanliness in Argon-Stirred Ladles, Shu-feng Yang, Lifeng Zhang, Jing-she Li, Yufeng Wang, and Kent D. Peaslee

Submissions from 2008

Link

Investigation of a Two-Stage Aqueous Reactor Design for Carbon Dioxide Sequestration using Steelmaking Slag, Semen Naumovich Lekakh, D. G. C. Robertson, C. Hank Rawlins, Von Richards, and Kent D. Peaslee

PDF

Energy Efficiency in Steel Casting Production, Raymond Monroe, Kent D. Peaslee, and R. Eppich

PDF

Improvements in Steel Melting Efficiency -- Industrial Trials, Kent D. Peaslee, Semen Naumovich Lekakh, and Edith Martinez

Carbon Dioxide Sequestration with Steelmaking Slag: Process Feasibility and Reactor Design, Kent D. Peaslee, Semen Naumovich Lekakh, C. Hank Rawlins, and Von Richards

Feasibility of Processing Steelmaking Slag for Carbon Dioxide Sequestration and Metal Recovery, C. Hank Rawlins, Kent D. Peaslee, and Von Richards

Sequestration of Carbon Dioxide by Steelmaking Slag: Process Phenomena and Reactor Study, Von Richards, C. Hank Rawlins, Semen Naumovich Lekakh, and Kent D. Peaslee

Fluid Flow and Inclusion Motion in Horizontal Continuous Casting Tundishes, Y. Shufeng, Lifeng Zhang, Kent D. Peaslee, L. Jingshe, S. Shaoqing, and Z. Zhu

PDF

Using Automated Inclusion Analysis for Casting Process Improvements, Vintee Singh, Semen Naumovich Lekakh, and Kent D. Peaslee

Iron: Stronger with Age, Jared Teague, Von Richards, Semen Naumovich Lekakh, and Kent D. Peaslee

Submissions from 2007

Link

Prediction of Burn-On and Mould Penetration in Steel Casting using Simulation, B. E. Brooks, C. Beckermann, and Von Richards

PDF

Life Cycle Greenhouse Gas Emission Comparison of Steel Products with Other Materials, Christopher P. Buterbaugh, Meghan C. McGrath, Justin K. Novotny, Zane T. Voss, Joseph M. Brunner, and Kent D. Peaslee

PDF

Fracture Toughness of Ceramic Moulds for Investment Casting with Ice Patterns, Qingbin Liu, Ming-Chuan Leu, and Von Richards

Link

Cerium-Based Conversion Coatings as Alternatives to Hex Chrome: Rare-Earth Compounds Provide Resistance Against Corrosion for Aluminum Alloys in Military Applications, Matthew O'Keefe, Simon Joshi, and Shujiang Geng

PDF

Increasing Energy Efficiency through Improvements in Ladle Materials and Practices, Kent D. Peaslee, Semen Naumovich Lekakh, Jeffrey D. Smith, and Mangesh Vibhandik

Mineralogical Sequestration of Carbon Dioxide through Aqueous Processing of Steelmaking Slag, C. Hank Rawlins, Semen Naumovich Lekakh, Von Richards, and Kent D. Peaslee

Link

The Use of Steelmaking Slag for Mineralogical Sequestration of Carbon Dioxide - Aqueous Processing, C. Hank Rawlins, Semen Naumovich Lekakh, Von Richards, and Kent D. Peaslee

Experimental Study of CO₂ Sequestration by Steelmaking Slag, C. Hank Rawlins, Von Richards, Kent D. Peaslee, and Semen Naumovich Lekakh

Link

Interaction of Molten Ultra-Low Carbon Steel with Carbide and Nitride Refractory Materials, Robert B. Tuttle, Kent D. Peaslee, and Jeffrey D. Smith

Link

Casting Simulation of Calcium Titanate and Calcium Zirconate Nozzles for Continuous Casting of Aluminum-Killed Steels, Robert B. Tuttle, Jeffrey D. Smith, and Kent D. Peaslee

Link

Response of Nano-Crystalline Cerium based Conversion Coatings on Al 2024-T3 to Chloride Environments, Shaoxin You, Philip S. Jones, Ajay Padwal, Pu Yu, Matthew O'Keefe, Thomas J. O'Keefe, and William Fahrenholtz

Submissions from 2006

An Investigation of the Causes that Lead to Burn-In/Burn-On in Heavy Section Steel Castings, Brandon L. Kruse, Von Richards, and P. D. Jackson

Link

Chromate-Free Corrosion Protection, Matthew O'Keefe

PDF

Decreasing Electrical Energy Consumption through SiC Additions, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, John Carpenter, and Chen Wang

PDF

Improving Melting Efficiency through the Application of New Refractory Materials, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, Todd P. Sander, Jeffrey D. Smith, and Mangesh Vibhandik

Effect of Nozzle Base Material on the Rate of Clogging during the Continuous Casting of Aluminum-Killed Steels, Kent D. Peaslee, Jeffrey D. Smith, Musa Karakus, and Luis Trueba Jr.

Simulation of Nozzle Clogging during the Continuous Casting of Aluminum-Killed Steel, Kent D. Peaslee, Jeffrey D. Smith, and Luis Trueba

PDF

Simulations of a New Continuous Steelmaking Process, Jorg Annie Peter, Kent D. Peaslee, and D. G. C. Robertson

Sequestration of CO₂ from Steelmaking Offgas by Carbonate Formation with Slag, C. Hank Rawlins, Gail L. Richards, Kent D. Peaslee, and Semen Naumovich Lekakh

Steelmaking Slag as a Permanent Sequestration Sink for Carbon Dioxide, C. Hank Rawlins, Von Richards, Kent D. Peaslee, and Semen Naumovich Lekakh

Alloy Dissolution in Argon Stirred Steel, Darryl S. Webber, Kent D. Peaslee, and Von Richards

Submissions from 2005

PDF

Efficiency in Steel Melting: Opportunities and Progress, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, and Jay Triplett

PDF

Efficiency in Steel Melting: Ladle Development, Kent D. Peaslee, Semen Naumovich Lekakh, Todd P. Sander, and Jeffrey D. Smith

Experimental Study of Kinetic Processes during the Steel Treatment at Two LMF's, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, and Brian G. Thomas

Introduction of a Novel, Scrap-Based, Fully Continuous Steelmaking Process, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, Lifeng Zhang, and Brian G. Thomas

Lime-Based Plasma Spray Coatings on Steelmaking Nozzles, Jeffrey D. Smith, Kent D. Peaslee, and David C. Van Aken

Link

Interaction of Alumina Inclusions in Steel with Calcium-Containing Materials, Robert B. Tuttle, Jeffrey D. Smith, and Kent D. Peaslee