The Faculty Research & Creative Works series collects scholarly and creative work by Missouri S&T's faculty and professional staff. To find works from a specific department, center, or program, browse by Programs, Centers, and Departments. To browse content in this series by author, use the link below:
Browse by Faculty AuthorSubmissions from 2005
Materials Education at the University of Missouri-Rolla: Educating Metallurgical and Ceramic Engineers, Kent D. Peaslee
Efficiency in Steel Melting: Opportunities and Progress, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, and Jay Triplett
Efficiency in Steel Melting: Ladle Development, Kent D. Peaslee, Semen Naumovich Lekakh, Todd P. Sander, and Jeffrey D. Smith
Alloy Recovery and Control in Steel Melting, Kent D. Peaslee, Darryl S. Webber, Semen Naumovich Lekakh, and Bradley Randall
Evaluation of Microwave Reflection Properties of Cyclically Soaked Mortar Based on a Semiempirical Electromagnetic Model, Shanup Peer, K. E. Kurtis, and R. Zoughi
Surface Reconstruction for Interactive Modeling of Freeform Solids by Virtual Sculpting, Xiaobo Peng, Weihan Zhang, and Ming-Chuan Leu
Effects of N-acetylcysteine Amide (NACA), a Novel Thiol Antioxidant Against Glutamate-induced Cytotoxicity in Neuronal Cell Line PC12, Suman Penugonda, Suneetha Mare, Nuran Ercal, William A. Banks, and Glenn Goldstein
Relative State Selective Capture Cross Sections for Low Energy Collisions between Highly Charged Bare Ions and Neutral Atoms, James A. Perez and Ronald E. Olson
Discrete Maneuver Formationkeeping At Libration Points L₁ and L₂, Henry J. Pernicka, S. N. Balakrishnan, and Brian A. Carlson
Tundra Constellation Design and Station Keeping, Henry J. Pernicka and M. J. Bruno
Close Spacecraft Formation Keeping, Henry J. Pernicka and Pierre Vignal
Experimental Study of Kinetic Processes during the Steel Treatment at Two LMF's, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, and Brian G. Thomas
Introduction of a Novel, Scrap-Based, Fully Continuous Steelmaking Process, Jorg Annie Peter, Kent D. Peaslee, D. G. C. Robertson, Lifeng Zhang, and Brian G. Thomas
Influence of the Grain Boundaries on Conductivity of Yttrium Stabilized Zirconia, Vladimir Petrovsky, Piotr Z. Jasinski, Tatiana Petrovsky, and Harlan U. Anderson
Low-temperature Processed Anode for Solid Oxide Fuel Cells, Vladimir Petrovsky, Toshio Suzuki, Piotr Z. Jasinski, and Harlan U. Anderson
Semi-Automated based Ground-Truthing GUI for Airborne Imagery, Chung Phan, Rich Lydic, Tim Moore, Anh Trang, Sanjeev Agarwal, and Spandan Tiwari
The Role of MDSolids in International Mechanics of Materials Education, Timothy A. Philpot and Richard H. Hall
Assessment of Interactive Courseware for Shear Force and Bending Moment Diagrams, Timothy A. Philpot, Richard H. Hall, Nancy Hubing, and Carla A. Campbell
Using Games to Teach Statics Calculation Procedures: Application and Assessment, Timothy A. Philpot, Richard Hall, Nancy Hubing, and Ralph E. Flori
Synthesis of Gold Nanoparticles Attached to Polypyrrole Nanofibers, Sunil K. Pillalamarri, Frank D. Blum, and Massimo F. Bertino
Synthesis of Polyaniline-gold Nanocomposites Using "grafting From" Approach, Sunil K. Pillalamarri, Frank D. Blum, and Massimo F. Bertino
Synthesis of Polyaniline-gold Nanocomposites Using “grafting From” Approach, Sunil K. Pillalamarri, Frank D. Blum, and Massimo F. Bertino
One-pot Synthesis of Polyaniline-metal Nanocomposites, Sunil K. Pillalamarri, Frank D. Blum, Akira Tokuhiro, and Massimo F. Bertino
Radiolytic Synthesis of Polyaniline Nanofibers: A New Templateless Pathway, Sunil K. Pillalamarri, Frank D. Blum, Akira Tokuhiro, J. Greg Story, and Massimo F. Bertino
The Use of Fingernails as a Means of Assessing Bone Health: A Pilot Study, Isweri Pillay, D. Lyons, M. J. German, N. S. Lawson, H. M. Pollock, J. Saunders, S. Chowdhury, P. Moran, and Mark R. Towler
A Magnetic and Mössbauer Spectral Study of SmFe₁₁Ti, LuFe₁₁Ti, and Their Respective Hydrides, Cristina Piquer, Fernande Grandjean, Gary J. Long, and Olivier Isnard
Betrayal and Healing: The aftermath of Judas' Kiss., Canon Nancy Van Dyke Platt and Richard H. Hall
A New Test Setup and Method for the Calibration of Current Clamps, David Pommerenke, Ramachandran Chundru, and Sunitha Chandra
Optimal Training Parameters for Continuously Varying MIMO Channels, Christopher G. Potter, Adam G. Panagos, Kurt Louis Kosbar, and William Weeks
Utilizing NDE Methods for Steel Casting Performance, David Poweleit, Raymond Monroe, and Von Richards
Exchange Distortion and Postcollision Interaction for Intermediate-Energy Electron-Impact Ionization of Argon, A. Prideaux, Don H. Madison, and K. Bartschat
Structure of Chromium Oxide Ultrathin Films on Ag(1 1 1), W. A. A. Priyantha and George Daniel Waddill
Innovative Technique for Seismic Upgrade of RC Square Columns, Andrea Prota, Gaetano Manfredi, Alberto Balsamo, Antonio Nanni, and Edoardo Cosenza
Observed and Predicted Response of Block Foundations, Vijay K. Puri, Shamsher Prakash, and Braja M. Das
Impact of Food Disinfection on Beneficial Biothiol Contents in Vegetables, Zhimin Qiang, Nuran Ercal, Craig D. Adams, and Omca Demirkol
Demonstration of an Alternative Mechanism for G-to-G Cross-Link Formation, Ming Qian and Rainer Glaser
Crosstalk Analysis By Fast Computational Algorithms, Z. G. Qian, J. Xiong, L. Sun, I. T. Chiang, W. C. Chew, L. (Lijun) J. Jiang, and Y. H. Chu
Cross Training for Efficient and Flexible Service System Portfolios, Ruwen Qin and David Nembhard
Crystal Plasticity Simulation Study on the Influence of Texture on Earing in Steel, D. Raabe, Yang Wang, and F. Roters
A Methodology for Model Selection in Engineering Design, Rajesh Radhakrishnan and Daniel A. McAdams
Dynamic Modeling of Slurry Bubble Column Reactors, Novica Rados, Muthanna H. Al-Dahhan, and Milorad P. Duduković
Phase Distribution in a High Pressure Slurry Bubble Column Via a Single Source Computed Tomography, Novica Rados, Ashfaq Shaikh, and Muthanna H. Al-Dahhan
Solids Flow Mapping in a High Pressure Slurry Bubble Column, Novica Rados, Ashfaq Shaikh, and Muthanna H. Al-Dahhan
Design Stability, K. M. Ragsdell
Preparation and Bioactive Characteristics of Porous Borate Glass Substrates, M. N. Rahaman, Wen Liang, D. E. Day, Nicholas W. Marion, Gwendolen C. Reilly, and Jeremy J. Mao
Preparation and Bioacttve Characteristics of Porous Borate Glass Substrates, M. N. Rahaman, Wen Liang, D. E. Day, Nicholas W. Marion, Gwendolen C. Reilly, and Jeremy J. Mao
Simulation Based Performance Modeling for a Warfighter in the Loop Minefield Detection System, Abhilash Rajagopal, Sanjeev Agarwal, and Sreeram Ramakrishnan
Simulation-Based Performance Modeling for War Fighter in Loop Minefield Detection System, Abhilash Rajagopal, Sanjeev Agarwal, and Sreeram Ramakrishnan
Creation of Assembly Models to Support Automated Concept Generation, Venkat Rajagopalan, Cari R. Bryant, Jeremy Johnson, Daniel A. McAdams, Robert B. Stone, Tolga Kurtoglu, and Matthew I. Campbell
An SDS Modeling Approach for Simulation-Based Control, Sreeram Ramakrishnan and Kumar Mayur Thakur
Correlation between Growth Conditions, Microstructure, and Optical Properties in Pulsed-laser-deposited V₂O₅ Thin Films, Chintalapalle Venkata Ramana, R. J. Smith, O. M. Hussain, Charles C. Chusuei, and C. M. Julien
OEDSR: Optimized Energy-delay Sub-network Routing in Wireless Sensor Network, Sibila Ratnaraj, Jagannathan Sarangapani, and Vittal S. Rao
Nitrosative Cytosine Deamination. An Exploration of the Chemistry Emanating from Deamination with Pyrimidine Ring-opening, Sundeep Rayat, Ming Qian, and Rainer Glaser
A New DTA Method for Measuring Critical Cooling Rate for Glass Formation, C. S. Ray, Signo Tadeu Dos Reis, Richard K. Brow, Wolfram Höland, and Volker M. Rheinberger
Optimal Dynamic Neurocontrol of a Gate-Controlled Series Capacitor in a Multi-Machine Power System, Swakshar Ray, Ganesh K. Venayagamoorthy, Edson H. Watanabe, and F. D. de Jesus
Warfighter-in-the-loop: Mental Models in Airborne Minefield Detection, Madhu Reddy, Sanjeev Agarwal, Richard H. Hall, John Brown, Thomas Woodard, and Anh Trang
Gem-Difluorination of 2,2-diaryl-1,3-dithiolanes by Selectfluor® and Pyridinium Polyhydrogen Fluoride, Prakash Reddy, Ramesh Alleti, Meher Perambuduru, Urs Welz-Biermann, Herwig Buchholz, and G. K. Surya Prakash
Carnosine: A Versatile Antioxidant and Antiglycating Agent, Prakash Reddy, Matthew R. Garrett, George Perry, and Mark A. Smith
13C NMR Spectroscopic, CV, and Conductivity Studies of Propylene Carbonate-Based Electrolytes Containing Various Lithium Salts, Prakash Reddy, Marshall C. Smart, Keith B. Chin, Bugga V. Ratnakumar, Subbarao Surampudi, Jinbo Hu, Ping Yan, and G. K. Surya Prakash
Low Emission-Low Maintenance Burner Design, Scott D. Reed, David L. Parenton, and Joseph D. Smith
Optimized Energy-Delay Routing in Ad Hoc Wireless Networks, Niranjan Regatte and Sarangapani Jagannathan
The Formation of Third Generation Poly(pyrazolyl)borate Ligands from Alkyne Coupling Reactions of Fe[(p-IC₆H₄)B(3-Rpz)₃]₂ (R = H, Me; pz = Pyrazolyl): Pathways Toward Controlling an Iron(II) Electronic Spin-State Crossover, Daniel L. Reger, James R. Gardinier, William R. Gemmill, Mark D. Smith, Ahmed M. Shahin, Gary J. Long, Leïla Rebbouh, and Fernande Grandjean
Polymorphism in Fe[(p-IC₆H₄)B(3-Mepz)₃]₂ (pz = Pyrazolyl): Impact of Supramolecular Structure on an Iron(II) Electronic Spin-State Crossover, Daniel L. Reger, James R. Gardinier, Mark D. Smith, Ahmed M. Shahin, Gary J. Long, Leïla Rebbouh, and Fernande Grandjean
Ontogeny of Physiological Regulatory Mechanisms: Fitting into the Environment - Introduction to the Symposium, Carl L. Reiber and Stephen P. Roberts
Thermodynamics of Refractories for Black Liquor Gasification, Alireza Rezaie, William L. Headrick, and William Fahrenholtz
Aggregate Gradation Optimization -- Literature Search, David Newton Richardson
Performance Characterization of Turboshaft Engines Using Work Potential Methods, David W. Riggins, C. D. Wilson, B. A. Roth, and R. A. McDonald
Analysis of a Low-Pass Filter Employing a 4-pin Capacitor, A. Ritter, Todd H. Hubing, Thomas Van Doren, and Theodore M. Zeeff
Strengthening of Off-System Bridges with Mechanically Fastened Pre-Cured FRP Laminates, Andrea Rizzo, Nestore Galati, and Antonio Nanni
Material Characterization of FRP Pre-Cured Laminates Used in the Mechanically Fastened FRP Strengthening of RC Structures, Andrea Rizzo, Nestore Galati, Antonio Nanni, and Lokeswarappa R. Dharani
Effects of Flight Behaviour on Body Temperature and Kinematics during Inter-Male Mate Competition in the Solitary Desert Bee Centris Pallida, Stephen P. Roberts
Muscle Biochemistry and the Ontogeny of Flight Capacity during Behavioral Development in the Honey Bee, Apis Mellifera, Stephen P. Roberts and Michelle M. Elekonich
An Analog VLSI Implementation Of A Multi-scale Spike Detection Algorithm For Extracellular Neural Recordings, Christy L. Rogers, John G. Harris, Jose C. Principe, and Justin C. Sanchez
Design and Operation of a Multiple-Cathode, High-Power, Rectangular Discharge Chamber, Joshua L. Rovey and Alec D. Gallimore
Dormant Cathode Plasma Properties in a Multiple-Cathode, High-Power, Rectangular Discharge Chamber, Joshua L. Rovey and Alec D. Gallimore
Potential Structure and Propellant Flow Rate Theory for Ion Thruster Discharge Cathode Erosion, Joshua L. Rovey, Alec D. Gallimore, and Daniel A. Herman
Flow Distribution Characteristics of a Gas-Liquid Monolith Reactor, Shaibal Roy and Muthanna H. Al-Dahhan
Flow Distribution Characteristics of a Gas-Liquid Monolith Reactor using Computed Tomography, Shaibal Roy and Muthanna H. Al-Dahhan
Countercurrent Flow Distribution in Structured Packing Via Computed Tomography, Shaibal Roy, A. Kemoun, M. (Muthanna) H. Al-Dahhan, M. P. Dudukovic, Thomas B. Skourlis, and Frits M. Dautzenberg
Experimental Investigation of the Hydrodynamics in a Liquid-Solid Riser, Shantanu Roy, Abdenour Kemoun, M. (Muthanna) H. Al-Dahhan, and M. P. Dudukovic
Microwave Permeability of CO₂ Z Composites, Konstantin Rozanov, Marina Koledintseva, Z. W. Li, and L. F. Chen
Automatic Multi-Axis Slicing based on Centroidal Axis Computation, Jianzhong Ruan, Kunnayut Eiamsa-ard, and Frank W. Liou
Automatic Process Planning and Toolpath Generation of a Multiaxis Hybrid Manufacturing System, Jianzhong Ruan, Kunnayut Eiamsa-ard, and Frank W. Liou
Automatic Process Planning and Toolpath Generation of a Multi-Axis Hybrid Manufacturing System, Jianzhong Ruan, Frank W. Liou, and Kunnayut Eiamsa-ard
Evolutionary Optimization of Filter Parameters For Image Segmentation, Timothy Rupe, Jennifer Leopold, Anne M. Maglia, and Daniel R. Tauritz
Structured Object-Oriented Co-Analysis/Co-Design of Hardware/Software for the FACTS Powers System, Matt Ryan, Sojan Markose, Xiaoqing Frank Liu, and Bruce M. McMillin
The Effects of MIM Processing Parameters on Variations in Part Weights and Dimensions, James Alan Sago and Joseph William Newkirk
Use of 16S rRNA Gene Terminal Restriction Fragment Analysis to Assess the Impact of Solids Retention Time on the Bacterial Diversity of Activated Sludge, Pascal E. Saikaly, Peter George Stroot, and Daniel B. Oerther
Hyperfiltration of NaCl Solutions Using a Simulated Clay/Sand Mixture at Low Compaction Pressures, Rosanna M. Saindon and Thomas M. Whitworth
Vegetable Oils in Paint and Coatings, Kathryn D. Sandefur and Michael R. Van-De-Mark
Doubly Differential Cross Sections for Single and Multiple Ionization of Ne by Electron Impact, Antonio C. Santos, Ahmad Hasan, and Robert D. DuBois
Scaling Laws for Electron Loss from Ion Beams, Antonio C. Santos, Ronald E. Olson, and Robert D. DuBois
Admission Controller Design for High-speed Networks: A Hybrid System Approach, Jagannathan Sarangapani
Decentralized Discrete-Time Neural Network Controller for a Class of Nonlinear Systems with Unknown Interconnections, Jagannathan Sarangapani
Neural Network -Based Nearly Optimal Hamilton-Jacobi-Bellman Solution for Affine Nonlinear Discrete-Time Systems, Jagannathan Sarangapani and Zheng Chen
Neural Network-Based Control of Nonlinear Discrete-Time Systems in Non-Strict Form, Jagannathan Sarangapani, Zheng Chen, and Pingan He
Alternative Source of Propylene, Abhay Sardesai and Sunggyu Lee
Wetting Kinetics of Films Containing Non-Adsorbing Polymers, S. Saritha, Xianzhong Zhang, and Partho Neogi
Implementation of Design for Test for Asynchronous NCL Designs, Venkat Satagopan, Waleed K. Al-Assadi, Scott C. Smith, and Bonita Bhaskaran
