Optimization of the Transition from Connector to PCB Board

Author

Shuai Jin
Jiangfan Zhang, Missouri University of Science and TechnologyFollow
Jun Fan, Missouri University of Science and TechnologyFollow

Abstract

A transition from vertically launched coaxial connector to routed trace on board is simulated and optimized to achieve very small reflections for precise TRL calibration. The mismatch of the discontinuities in the transition was reduced by controlling the via-impedance, introducing capacitive via-pads and applying diving boards. Each segment was optimized first, and then the whole cascaded structure was simulated to achieve the optimized smooth signal transition. © 2013 IEEE.

Recommended Citation

S. Jin et al., "Optimization of the Transition from Connector to PCB Board," IEEE International Symposium on Electromagnetic Compatibility, pp. 192 - 196, article no. 6670407, Institute of Electrical and Electronics Engineers, Dec 2013.

The definitive version is available at https://doi.org/10.1109/ISEMC.2013.6670407

Department(s)

Electrical and Computer Engineering

International Standard Book Number (ISBN)

978-147990408-2

International Standard Serial Number (ISSN)

2158-1118; 1077-4076

Document Type

Article - Conference proceedings

Document Version

Citation

File Type

text

Language(s)

English

Rights

© 2024 Institute of Electrical and Electronics Engineers, All rights reserved.

Publication Date

01 Dec 2013