Abstract
The use of a coaxial air-filled line as a test fixture for measuring complex permittivity and permeability often shows odd resonance-like behavior of material parameters as functions of frequency. This effect is typically either ascribed to the half-wavelength resonance at the sample length, or erroneously misinterpreted as intrinsic resonance behavior of the material. However, as is shown in this paper, such behavior can be attributed to excitation of the higher-order modes on the surface of the sample resulting in resonance absorption of electromagnetic energy in the test fixture. Herein, analytical, numerical, and experimental results show that there can actually be a significant impact of higher-order modes in a coaxial line on the extracted constitutive material parameters of samples.
Recommended Citation
D. A. Petrov et al., "Influence Of Higher-order Modes In Coaxial Waveguide On Measurements Of Material Parameters," 2018 IEEE Symposium on Electromagnetic Compatibility, Signal Integrity and Power Integrity, EMC, SI and PI 2018, article no. 8495305, Institute of Electrical and Electronics Engineers, Oct 2018.
The definitive version is available at https://doi.org/10.1109/EMCSI.2018.8495305
Department(s)
Electrical and Computer Engineering
International Standard Book Number (ISBN)
978-153866621-0
Document Type
Article - Conference proceedings
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2023 Institute of Electrical and Electronics Engineers, All rights reserved.
Publication Date
17 Oct 2018
Comments
Russian Science Foundation, Grant 16-19-10490