Content Posted in 2014
Structure and dynamics in three-component microemulsions, Frank D. Blum, Stephen Pickup, B. W. Ninham, S. J. Chen, and D. Fennell Evans
Structure and dynamics of amino functional silanes adsorbed on silica surfaces, Hye-Jung Kang and Frank D. Blum
Structure and dynamics of terminally attached, swollen block copolymers, Frank D. Blum, Brijnaresh R. Sinha, and Frederick C. Schwab
Structure and electronic properties of [Ni(dsdm)Fe((CO)₃)₂], an unusual, triangular nickel diiron compound, M. C. Chalbot, Allison M. Mills, Anthony L. Spek, Gary J. Long, and Elisabeth Bouwman
Structure and magnetic properties of the MnBi low temperature phase, Jinbo Yang, William B. Yelon, William Joseph James, Qingsheng Cai, Samit Roy, and Naushad Ali
Structure and mechanism in aerobic alkene epoxidations promoted by ruthenium complexes of bis(dihydrooxazole) ligands, Simon M. W. Bennett, Stephen M. Brown, G. Conole, M. Kessler, S. Rowling, Ekkehard Sinn, and Simon Woodward
Structure and Mössbauer effect study of [Et₄N]₂[Fe₂(CO)₈], J. M. Cassidy, K. H. Whitmire, and Gary J. Long
Structure and non-linear optical performance of TeO₂-Nb₂O₅-ZnO glasses, Jian Lin, Wen-Hai Huang, Zhengrong Sun, C. S. Ray, and D. E. Day
Structure and optical properties of rare earth-doped zinc oxyhalide tellurite glasses, David L. Sidebottom, Michael A. Hruschka, B. G. Potter, and Richard K. Brow
Structure and properties of Hfe₃(CO)9BH₃R and the conjugate bases [HFe3(CO)9BH2R]- (R = H and CH3). Inorganometallic analogues of hydrocarbyltriiron clusters, J. Vites, C. E. Housecroft, C. Eigenbrot, Margaret Linn Buhl, Gary J. Long, and Thomas P. Fehlner
Structure and properties of iron phosphate glasses: a novel host matrix for the vitrification of high-level nuclear wastes, Mevlüt Karabulut
Structure and properties of lanthanum-aluminum-phosphate glasses, Mevlüt Karabulut, EzzEldin Metwalli, and Richard K. Brow
Structure and properties of metal and alloy thin films prepared by plasma-enhanced metalorganic chemical vapor deposition, Tyau-Jeen Lin
Structure and properties of metallic SnZn alloy films prepared by plasma-enhanced metalorganic chemical vapor deposition, T. J. Lin, Thomas J. O'Keefe, and William Joseph James
Structure and properties of metallic tin films deposited onto heated substrates in a glow discharge, T. J. Lin, Thomas J. O'Keefe, and William Joseph James
Structure and properties of neodymium chromite., David Charles Hitchcock
Structure and properties of silver borate glasses, Edward Nashed Boulos
Structure and properties of Y₂O₃-Al₂O₃-SiO₂ glasses, Erik M. Erbe
Structured functional representations for conceptual modeling and redesign derived from historical component design information, Daniel Richard Abbott
Structured object-oriented co-analysis/co-design of hardware/software for the FACTS powers system, Matt Ryan, Sojan Markose, Xiaoqing Frank Liu, and Bruce M. McMillin
Structure-function correlations in iron(II) tris(pyrazolyl)borate spin-state crossover complexes, Daniel L. Reger, James R. Gardinier, J. Derek Elgin, Mark D. Smith, Dimitri Hautot, Gary J. Long, and Fernande Grandjean
Structure, magnetic, and transport properties of Ti-substituted La₀.₇Sr₀.₃MnO₃, M. S. Kim, Jinbo Yang, Qingsheng Cai, X.-D. Zhou, William Joseph James, William B. Yelon, D. Buddhikot, Satish K. Malik, and Paul Ernest Parris
Structure, magnetic, and transport properties of Ti-substituted La₀.₇Sr₀.₃MnO₃, M. S. Kim, Jinbo Yang, Qingsheng Cai, X.-D. Zhou, William Joseph James, William B. Yelon, Paul Ernest Parris, D. Buddhikot, and Satish K. Malik
Structure of a 12-vertex arachno carborane, σ-(η⁵-C₅H₅)Co(η⁵-C₅H₄)⁺-(CH3)₄C₄B₈H₈, Russell N. Grimes, J. Robert Pipal, and Ekkehard Sinn
Structure of acrylic silanes after heat treatment, Hyoryoon Jo and Frank D. Blum
Structure of a neighbourhood of a complex compact submanifold in a complex manifold, Roman Dwilewicz
Structure of a potassium germanophosphate glass by x-ray and neutron diffraction, Uwe Hoppe, G. Walter, Richard K. Brow, N. P. Wyckoff, A. Schöps, and A. C. Hannon
Structure of a potassium germanophosphate glass by X-ray and neutron diffraction, Uwe Hoppe, G. Walter, Richard K. Brow, N. P. Wyckoff, Andreas Schops, and A. C. Hannon
Structure of binary neodymium borate glasses by infrared spectroscopy, M. Affatigato, Richard K. Brow, A. E. Burns, D. W. Winslow, W. J. Clarida, and S. A. Feller
Structure of chromium oxide ultrathin films on Ag(1 1 1), W. A. A. Priyantha and George Daniel Waddill
Structure of GeO₂-P2₂O₅ glasses studied by x-ray and neutron diffraction, Richard K. Brow, P. Jóvári, Brad C. Tischendorf, A. C. Hannon, and Uwe Hoppe
Structure of Li,Na metaphosphate glasses by ³¹P and ²³Na MAS-NMR correlated with the mixed alkali effect, R. K. Sato, R. James Kirkpatrick, and Richard K. Brow
Structure of overfire soot in buoyant turbulent diffusion flames at long residence times, Ümit Özgür Köylü and G. M. Faeth
Structure of phosphorous oxynitride glasses, Bruce C. Bunker, David R. Tallant, Carol A. Balfe, R. James Kirkpatrick, Gary L. Turner, and Mary R. Reidmeyer
Structure of potassium germanophosphate glasses by X-ray and neutron diffraction: 1. Short-range order, Uwe Hoppe, Richard K. Brow, Andreas Schops, N. P. Wyckoff, and A. C. Hannon
Structure of potassium germanophosphate glasses by X-ray and neutron diffraction: 2. Medium-range order, Uwe Hoppe, G. Walter, Richard K. Brow, and N. P. Wyckoff
Structure of rare-earth phosphate glasses by X-ray and neutron diffraction, Richard K. Brow, Uwe Hoppe, D. Illeva, P. Jovari, and A. C. Hannon
Structure of sodium 4-(1'-Heptylnonyl)benzenesulfonate adsorbed on alumina using 2H NMR, E. Söderlind and Frank D. Blum
Structure of sodium phosphate glasses containing Al₂O₃ and/or Fe₂O₃. Part I, Andrea Moguš-Milanković, A. Gajović, A. Šantić, and D. E. Day
Structure of the 660-km discontinuity below a deflected slab: complex or simple?, Stephen S. Gao and Kelly H. Liu
Structure of the northern Great Plains and implications for continental assembly and evolution, E. Sandvol, P. Nabelek, E. Duke, Stephen S. Gao, C. Snelson, M. Terry, Kelly H. Liu, P. S. Dahl, and K. A. McCormick
Structure of titanophosphate glasses studied by X-ray and neutron diffraction, Richard K. Brow, Brad C. Tischendorf, Antje Kriltz, P. Jovari, Andreas Schops, Uwe Hoppe, and A. C. Hannon
Structure of ultraphosphate glasses with small rare-earth ions by X-ray diffraction, Uwe Hoppe, Richard K. Brow, U. Rutt, and N. P. Wyckoff
Structure of V₂O₅-P₂O₅ glasses by X-ray and neutron diffraction, Uwe Hoppe, N. P. Wyckoff, Melodie L. Schmitt, Richard K. Brow, A. Schöps, and A. C. Hannon
Structure of zero divisors, and other algebraic structures, in higher dimensional real Cayley-Dickson algebras, Harmon Caril Brown
Structure optimization of horizontal continuous casting tundishes using mathematical modeling and water modeling, Shufeng Yang, Lifeng Zhang, Jing-she Li, and Kent D. Peaslee
Structure-property correlations in Al 7050 and Al 7055 high-strength aluminum alloys, Rajiv S. Mishra, Krishnan K. Sankaran, and Manisha Dixit
Structure-property relationships in porous 3D nanostructures as a function of preparation conditions: isocyanate cross-linked silica aerogels, Lynn A. Capadona, Nicholas Leventis, Linda McCorkle, Mary Ann B. Meador, and Demetrios S. Papadopoulos
Structure-property relations in monolithic and fibrous monolithic ZrB2-based ceramics, William Fahrenholtz
Structures, adsorption, and dynamics of 3-acryloxypropyltrimethoxysilane and mechanical properties of its composites, Hyoryoon Jo
Structures and properties of the copper(II) and nickel(II) complexes of NN′-bis[(2-hydroxy-5-methylphenyl)phenylmethylene]-4-azaheptane-1,7- diamine and related compounds: Direct comparison of d8 and d9 analogues, Peter Conrad Healy, Garry M. Mockler, Derek P. Freyberg, and Ekkehard Sinn
Structures and properties of zinc(II) complexes of NN-bis[(2-hydroxy-5-X-phenyl)phenylmethylene]-4-azaheptane-1,7-diamine (X = chloro or methyl): Comparison of d10, d9, and d8 analogues, Derek P. Freyberg, Garry M. Mockler, and Ekkehard Sinn
Structures and relationships of some Perovskite-type compounds, Christian Michel
Structuring dynamic systems of chemical process design equations, Jeffrey Joseph Jost
Strut failure investigation of Paseo suspension bridge in Kansas City, MO, Christopher Thomas Courtright
Student and alumni perspectives: Engineering management at UMR, Vaishalee Naruka, William Daughton, and Stephen A. Raper
Student robotics competition using Robolab and Lego bricks, Rena Hixon, Sean J. Bentley, Steve Eugene Watkins, and Marcus André Huggans
Student views of diversity through a multicultural mathematics activity: viewing transformation during the middle school years, Jody L. Riskowski and Gayla R. Olbricht
Studies and speculations on an alternative mechanism for the response of direct-current electron-capture detectors, Walter A. Aue and Shubhender Kapila
Studies in cane sugar refining, Marion Smith Badollet
Studies in coprecipitation of trace amounts of elements, Gerald Delano Schucker
Studies in improvements to coal face ventilation with ming machine mounted dust scrubber systems, Stewart Gillies
Studies in ore deposition, Cyrus Edward Minor
Studies in slang, VII, Barry A. Popik and Gerald Leonard Cohen
Studies in tellurium, Victor Hugo Gottschalk
Studies in the distribution of Orbitolina walnutensis Carsey, Shirley Alfred Lynch
Studies of an electrical method for generating ultrasonic waves., Yung-Yien Huang
Studies of a quasi-binary β-NiAl and α-Re eutectic, J. G. Webber and David C. Van Aken
Studies of a skin impedance model for cancer detection, Xiangyang Zhou
Studies of C60 and C70 incorporated in cubic mesoporous silica (MCM-48), A. Govindaraj, Manashi Nath, and M. Eswaramoorthy
Studies of contact angles on oxidized copper minerals, John Stewart Carr
Studies of high water and quick setting (HWQS) cementitious mine backfill, Tad S. Golosinski, C. Wang, and R. Ganeswaran
Studies of inductive plasmas and their application to theta-pinch devices via numerical modeling, Warner Charles Meeks
Studies of influencing factors for shale gas reservoir performance, Jiaqi Wang
Studies of lead-iron-phosphate glasses by Raman, Mössbauer and impedance spectroscopy, Andrea Moguš-Milanković, Signo Tadeu Dos Reis, A. Šantić, D. E. Day, and Kresimir Furic
Studies of neutron capture produced rare gas isotopes in rocks and minerals containing chlorine, selenium and tellurium, David E. Sinclair
Studies of parameters affecting translocation of tetrachlorodibenzo-p-dioxin in soil, Ravi K. Puri, Tom E. Clevenger, Shubhender Kapila, A. F. Yanders, and R. K. Malhotra
Studies of processing parameters and thermal properties of mold in lost foam casting process, Chen Wang
Studies of stable silicon clusters and chemisorption of fluorine and oxygen on silicon surfaces by approximate molecular orbital theories, Tadashi Oshiro
Studies of the few-body problem in atomic break-up processes, Michael Schulz and Don H. Madison
Studies of the reaction between diazoacetylglycine methyl ester and Cu (II) and the inhibition of the enzyme, porcine pepsin, Barbara Ruth Patterson
Studies of Transport Phenomena and Their Effect on Weld Quality in Laser Beam Welding, Hai-Lung Tsai
Studies of V, Nb, Cr, and Zr substituted 2:17 compounds and their carbides using neutron diffraction, H. Luo, Z. Hu, Muguo Chen, William B. Yelon, G. K. Marasinghe, Peter C. Ezekwenna, William Joseph James, W. C. Chang, and S. H. Tsai
Studies on a helical magnetic flux compression generator, A. Neuber, J. Dickens, M. Giesselmann, M. Kristiansen, B. Freeman, D. Dorsey, Paul Nicholas Worsey, Jason Baird, and M. Schmidt
Studies on a helical magnetic flux compression generator, A. Neuber, J. Dickens, M. Giesselmann, M. Kristiansen, B. Freeman, D. Dorsey, Paul Nicholas Worsey, Jason Baird, and M. Schmidt
Studies on the conversion of indole acetic acid and oxindole acetic acid by Hygrophorous conicus, Barbara Ruth Patterson
Studies on the quantitative analysis of rhenium and its occurrence in the products of molybdenite processing, Walter Keith Dean
Studies on thermal degradation of oligo-2-[(4-morpholin-4-yl-phenyl)imino methyl] phenol and oligomer-metal complex compounds, Fatih Dogan and İsmet Kaya
Studies on the shrinkage-induced transport phenomena during alloy solidification, Kun-Chuan Chiang
Studies on the thermal behavior of FePO₄ in air, Liying Zhang, Mark E. Schlesinger, and Richard K. Brow
Studies on the transport and transformation of PCBs in plants, Q. Ye, Ravi K. Puri, Shubhender Kapila, and A. F. Yanders
Studies on the yield and rate of lysine production using brevibacterium lactofermentum., Ho Bao Nhan
Studies on uptake of PCBs by Hordeum vulgare (barley) and Lycopersicon esculentum (tomato), Q. Ye, Ravi K. Puri, Shubhender Kapila, W. R. Lower, and A. F. Yanders
Studies on vapor phase transport and role of dispersing medium on mobility of 2,3,7,8 TCDD in soil, J. Palausky, Shubhender Kapila, Stanley E. Manahan, A. F. Yanders, R. K. Malhotra, and Tom E. Clevenger
Studying robot kinematics and dynamics with the aid of mathematica, Ming-Chuan Leu, Zhiming Ji, and Y. S. Wang
Study of a batch distillation with reaction, Gaurav Pant
Study of abrasive waterjet nozzle materials and plasma transferred arc welding coatings, Ju Bao
Study of a hybrid transform/DPCM image coder., Tai On Tam
Study of alcohol permeating membranes as a means of alcohol-water mixture separation, Mark Patrick David Carthy
Study of a lead smelter waste water treatment process., William Chester McAllister III
Study of a molten carbonate fuel cell combined heat, hydrogen and power system: end-use application, Tarek A. Hamad, Abdulhakim Amer A. Agll, Yousif M. Hamad, Sushrut Bapat, Mathew Thomas, Kevin B. Martin, and John W. Sheffield
Study of a molten carbonate fuel cell combined heat, hydrogen and power system: End-use application, T. A. Hamad, A. A. Agll, Y. M. Hamad, S. Bapat, M. Thomas, Kevin B. Martin, and John W. Sheffield
Study of a molten carbonate fuel cell combined heat, hydrogen and power system: energy analysis, Abdulhakim Amer A. Agll, Yousif M. Hamad, Tarek A. Hamad, Mathew Thomas, Sushrut Bapat, Kevin B. Martin, and John W. Sheffield
Study of a molten carbonate fuel cell combined heat, hydrogen and power system: Energy analysis, A. A. A. Agll, Y. M. Hamad, T. A. Hamad, M. Thomas, S. Bapat, Kevin B. Martin, and John W. Sheffield
Study of artificially disordered optical fibers, Herath Mudiyanselage Sumudu Rasika Kumari Herath
Study of Asynchronous Transfer Mode networks using Block Oriented Network Simulator, Sandeep Suresh Tamboli
Study of bird strikes using smooth particle hydrodynamics and stochastic parametric evaluation, Venkata Bheemreddy and K. Chandrashekhara
Study of breakdown/arcing for high power RF antennas on fusion applications, Carlos H. Castano
Study of burn-in/burn-on in steel castings, Deepak John Rasquinha
Study of carbon pick-up in lost foam casting of steel, Abhay Singh
Study of cold-formed steel beam webs subjected to bending stress, Roger A. LaBoube and Wei-wen Yu
Study of cold-formed steel structural members made of thick sheets and plates, William M. McKinney and Victor A. S. Liu
Study of cold-formed steel structural members made of thick sheets and plates, William M. McKinney, Victor A. S. Liu, and Wei-wen Yu
Study of combined heat, hydrogen and power system based on a molten carbonate fuel cell fed by biogas produced by anaerobic digestion, T. A. Hamad, A. A. Agll, Y. M. Hamad, S. Bapat, M. Thomas, Kevin B. Martin, and John W. Sheffield
Study of corporate turnaround: using a probability of bankruptcy, Chavalit Arkaradejdachachai
Study of current steelmaking practices to evaluate the viability of continuous steelmaking, Jörg Peter, Kent D. Peaslee, and D. G. C. Robertson
Study of deformation of non-oscillating droplets in liquid media, Arun Kumar Agrawal
Study of diagnosability of binary address decoders, Girishchandra Mahendrakumar Gandhi
Study of diverse mechanisms of cell-mediated cytotoxicity in gene-targeted mice using flow cytometric cytotoxicity assay, Anatoli Malyguine, Eric G. Derby, Alan Brooks, Prakash Reddy, Michael W. Baseler, and Thomas Sayers
Study of electrical properties of MoO₃-Fe₂O₃-P₂O₅ and SrO-Fe₂O₃-P₂O₅ glasses by impedance spectroscopy, Andrea Moguš-Milanković, Mevlüt Karabulut, A. Šantić, and D. E. Day
Study of electrical properties of MoO₃-Fe₂O₃-P₂O₅ and SrO-Fe₂O₃-P₂O₅ glasses by impedance spectroscopy. II, Andrea Moguš-Milanković, A. Šantić, Mevlüt Karabulut, and D. E. Day
Study of emission properties of 2-propyl soyate two-stroke lubricating oil, Jarred Michael Crouch
Study of fins, Arvind Krishnan
Study of gamma crystallins using small angle neutron scattering, Paul Adam Petitt
Study of glass matrixing of marine antifouling agents for surface coating application, Angela M. Ross
Study of ground movement in a mining area 2.50L, Anton Chirica, Andrei Olteanu, Rolland Mlcnajek, and Cristian Banciu
Study of ground movement in a mining area 2.50L, Anton Chirica, Andrei Olteanu, Rolland Mlcnajek, and Cristian Banciu
Study of heat and mass transfer through non-wettable porous membrane, Rajender Kumar Rohatgi
Study of heat treatment effects on properties and structures of A356 and B319 cast aluminum alloys, Alidad Mohammadi
Study of hostile applets as a threat to internet users, Ganesh Sridharan
Study of interconnect vias by the discrete surface integral method, Hao Shi and James L. Drewniak
Study of local area network emulation using block oriented network simulator, Dikan Rendic
Study of mass transfer in oscillating droplets., Subhash Vishnu Gangal
Study of mass transfer through porous water-repellent membrane as a function of membrane thickness and rates of heating, Yalamanchili Babu Rao
Study of mass transfer through porous, water-repellent membranes, Virendra V. Tanna
Study of neutron reflection from a curved surface using the Monte Carlo method, Marion Jay Rackley
Study of oil well squeeze cementing operations, Arthur Wellesley Walker
Study of part geometric features and support materials in rapid freeze prototyping, Qingbin Liu, Ming-Chuan Leu, and Frances D. Bryant
Study of polarization of laser radiation scattered 90 deg, Dwight C. Look and Y. R. Chen
Study of rate of mechanical shear degradation of polymer solutions, In-Mau Chen
Study of relay behaviour under system oscillations and out of step conditions, Emil D. Grigoriadis
Study of resonance effects in allenic and related systems, Robert Andrew Steinkamp
Study of some debris avalanches in Garwal Himalaya, India, H. C. Nainwal, C. Prasad, and Y. P. Sundriyal
Study of spent refractory waste recycling from metal manufacturers in Missouri, H. Fang, Jeffrey D. Smith, and Kent D. Peaslee
Study of structural and magnetic properties of iron-rich mixed rare-Earth NdDyFe (17-y-x)CoxSiy compounds, Kishore Kamaraju, Jinbo Yang, William B. Yelon, Oran Allan Pringle, M. S. Kim, Qingsheng Cai, and William Joseph James
Study of techniques for designing large digital systems interactively., Harold Dale Puls
Study of the biological destructive separation of hazardous contaminants from town gas soils, Teresa J. Cutright, Kathy L. Fullerton, and Sunggyu Lee
Study of the copper-uranium deposits at Vilcabamba, Department of Cuzco, Peru., Oscar Aguilar
Study of the crystal structure and phase transition of Li₂NH system, Jinbo Yang, Jagat Lamsal, Qingsheng Cai, William B. Yelon, and William Joseph James
Study of the design of reinforcement for prestressed concrete and blocks., Charles Robert Hoffman
Study of the effect of ion implantation on polymer to metal adhesion, G. Surendran, William Joseph James, W. Brearley, and Edward Boyd Hale
Study of the effect of pp-g-ma and sebs-g-ma on the mechanical and morphological properties of polypropylene/nylon 6 blends, J. David Tucker, Sunggyu Lee, and Richard L. Einsporn
Study of the effect of processing parameters on the properties of powder metallurgical parts, Sanjay N. Thakur
Study of the electronic properties of some ytterbium filled skutterudites by magnetic susceptibility and x-ray absorption and tin-119 Mössbauer spectroscopy, Fernande Grandjean, Gary J. Long, Bernard Mahieu, Jinbo Yang, Gregory P. Meisner, and Donald T. Morelli
Study of the electronic spin-state crossover in {Fe[HC(3,4,5-Me3pz)₃]₂}(BF₄)₂, J. Derek Elgin, Fernande Grandjean, Gary J. Long, Leïla Rebbouh, Daniel L. Reger, and Mark D. Smith
Study of the electronic structure of CaFeO₃, Jinbo Yang, M. S. Kim, Qingsheng Cai, X.-D. Zhou, William B. Yelon, Harlan U. Anderson, and William Joseph James
Study of the geology and mineralogy of Silver Mine-Missouri as part of a possible ring complex, Juan M. Velasco
Study of the high-temperature spin-state crossover in the iron(II) pyrazolylborate complex Fe[HB(pz)₃]₂, Fernande Grandjean, Gary J. Long, B. B. Hutchinson, L. Ohlhausen, P. Neill, and David Holcomb
Study of the iron-phosphorus-oxygen system by Mössbauer effect, neutron diffraction, magnetic susceptibility, and analytical electron microscopy: Some pitfalls and solutions in the analysis of a complex mixture, Gary J. Long, A. K. Cheetham, and Peter D. Battle
Study of the magnetic properties of iron(III) molybdate, by susceptibility, Mössbauer, and neutron diffraction techniques, Peter D. Battle, A. K. Cheetham, Gary J. Long, and Geoffrey Longworth
Study of the method of geometric mean distances used in inductance calculations, Harold Lockwood Seneff
Study of the monthly extraction record and curve of a modern Mexican cyanide plant, George William Harris
Study of the origin and mechanism of band broadening and pressure drop in centrifugal countercurrent chromatography, Daniel W. Armstrong, Gary L. Bertrand, and Alain Berthod
Study of the range of simple harmonic response in non-linear ship rolling, Victor Birman and Robert G. Latorre
Study of the return-on-investment surface of a small chemical plant., Jose Antonio Casas Martinez-Ortiz
Study of the Ste. Genevieve formation at selected localities in Southern Illinois and Western Kentucky, Mahlon Jack Apgar Reinhard
Study of the structural, electronic, and magnetic properties of the barium-rich iron(IV) iron(IV) oxides, Ba₂FeO₄ and Ba₃FeO₅, J. L. Delattre, A. M. Stacy, V. G. Young Jr., Gary J. Long, Raphaël P. Hermann, and Fernande Grandjean
Study of the substitution of barite for barium carbonate in a whiteware body suitable for brick manufacture, Charles Edward Achuff
Study of TI64 vibration laser metal deposition process, Xue Yong Chen, Todd E. Sparks, Jianzhong Ruan, and Frank W. Liou
Study of ultrasonic vibration laser metal deposition process, X. Chen, Todd E. Sparks, Jianzhong Ruan, and Frank W. Liou
Study of uptake and loss of silica nanoparticles in living human lung epithelial cells at the single cell level, Isaac Stayton, Jeffrey G. Winiarz, Katie Shannon, and Yinfa Ma
Study of vibration in site selection for a precision instrument factory, Pan Fulan
Study of void closure in hot radial forging process using 3D nonlinear finite element analysis, J. Chen, K. Chandrashekhara, Chirag Mahimkar, Semen Naumovich Lekakh, and Von Richards
Study on chemical durability of phosphate glass wasteform, Wen-Hai Huang, Naphthalene Zhow, D. E. Day, and C. S. Ray
Study on CO₂ laser irradiation-induced mode coupling for development of miniaturized interferometric sensors, Xinwei Lan, Tao Wei, Xiling Tang, Yinan Zhang, Junhang Dong, and Hai Xiao Dr.
Study on mechanism of caisson type sea wall movement during earthquakes 3.18, Masayuki Sato, Hiroyuki Watanabe, and Satoshi Katayama
Study on multilevel converters for static synchronous compensators with energy storage, Chang Qian
Study on performance-based design for mine fire safety system, X. Zhang, Y. Zhang, and Jerry C. Tien
Study on sustainable capacity of coal mining in China under the micro-macro angle of view, Q. Qi, J. Zhang, and Jerry C. Tien
Study on the behavior of cold-formed steel angle tension members, R. PadmaPriya and S. Kandasamy
Study on the effects of battery capacity on the performance of hybrid electric vehicles, Deepak Somayajula, Andrew Meintz, and Mehdi Ferdowsi
Study on the role played by the mineral constituents during grinding operation of coal by Hardgrove machine, K. K. Kanjilal, D. R. Chatterjee, and Arindam Banerjee
Study on uncertainty analysis and robust design: a review, Deshun Liu, Wenhui Yue, and Xiaoping Du
Study on water deposit in rapid freeze prototyping process, Guanghua Sui, Weihan Zhang, and Ming-Chuan Leu
Study program to develop and evaluate die and container materials for the growth of silicon ribbons, P. D. Ownby, Larry A. Addington, B. B. Yu, M. W. Barsoum, and Harold V. Romero
Study the shielding gas effect on the metal transfer and weld pool dynamics in GMAW, Z. H. Rao, J. Hu, S. M. Liao, and Hai-Lung Tsai
Study The Shielding Gas Effects On Transport Phenomena In GMAW Arc, J. Hu, Z. H. Rao, S. M. Liao, and Hai-Lung Tsai
Sturcture of acrylic silanes after heat treatment, Hyoryoon Jo and Frank D. Blum
Sturmian and spectral theory for discrete symplectic systems, Martin Bohner, Ondřej Došlý, and Werner Kratz
Sturm-Liouville eigenvalue problems on time scales, Martin Bohner, Ravi P. Agarwal, and Patricia J. Y. Wong
Stylolites and sedimentary structures in the Cave-in-Rock fluorspar district, Southern Illinois., Won C. Park
Sub-chronic lead exposure alters kidney proteome profiles, Nuran Ercal, Jing Chen, Greg Mercer, Sarah R. Roth, Linu Sara Abraham, Paula Marcellus Lutz, and Rachel Neal
Subcritical assembly at Missouri University of Science & Technology, L. P. Tucker and Shoaib Usman
Subcritical reactor experiments at the University of Cincinnati, N. Xoubi, Shoaib Usman, and G. I. Maldonado
Subeutectic densification and second-phase formation in Al₂O₃CaO, Shun Jackson Wu, L. C. De Jonghe, and M. N. Rahaman
Sub-femtosecond correlated dynamics explored with antiprotons, J. Ullrich, A. Dorn, D. Fischer, R. Moshammer, B. Najjari, Michael Schulz, A. B. Voitkiv, and C. P. Welsch
Subject-treatment interaction, Gary L. Gadbury
Submerged combustion in-bath smelting in metallurgical reactors, Dhiren Panda
Submersion-subcritical safe space (S⁴) reactor, Jeffrey C. King and Mohamed S. El-Genk
Sub-optimal analytic guidance for reusable launch vehicles, Katie Grantham Lough
Subpixel edge estimation using geometrical edge models with noise miniaturization, Robert Mitchell and D. C. D. Hung
Subpixel measurements using a moment-based edge operator, Robert Mitchell, E. P. Lyvers, M. L. Akey, and A. P. Reeves
Subsidence affects due to gypsum solution in Syracuse, New York, S. Anagnost, George W. Lee Jr., S.P. Clemence, and Shobha K. Bhatia
Subsidence movements and structural damage related to an abandoned coal mine, Y. P. Chugh, R. J. Missavage, and K. Chandrashekhar
Subsize specimen testing of a nuclear reactor pressure vessel material, Arvind S. Kumar, S. T. Rosinski, N. S. Cannon, and M. L. Hamilton
Subsolution–supersolution method in variational inequalities, Vy Khoi Le
Substituent effects and variable hybridization, W. Daniel Edwards
Substituent effects in quintuple bonded ArCrCrAr compounds (Ar = Terphenyl) and related species, Marcin Brynda, James C. Fettinger, Roland C. Fischer, Matthew Hellman, Gary J. Long, Tailuan Nguyen, Chengbao Ni, Philip P. Power, Lihung Pu, Andrew D. Sutton, and Robert Wolf
Substituent effects on the binding of phenols to cyclodextrins in aqueous solution, Gary L. Bertrand, James R. Faulkner, Soon M. Han, and Daniel W. Armstrong
Substituent effects on the magnetic resonance spectra of 1, 4-disubstituted benzenes, Holger Er-Chah Chen
Substitute for the impact damper, Don Cronin and Nguyen Khanh Van
Substitutional and ordering effects in rare earth-transition metal alloys, Paul Edward Johnson
Substitution and photolytic rearrangements in three-member ring compounds, Joseph Terril Bohanon
Substroke matching by segmenting and merging for online Korean cursive character recognition, Chang-Soo Kim, Kang Ryoung Park, Byung Hwan Jun, and Jaihie Kim
Substructural health monitoring methodology for damage detection in beam and plate structures, Sravan Prakash Mantha
Subsumption in modal logic, Dirk Heydtmann
Sub-supersolution method for quasilinear parabolic variational inequalities, Siegfried Carl and Vy Khoi Le
Sub-supersolution method for quasilinear parabolic variational inequalities, Siegfried Carl and Vy Khoi Le
Sub-supersolution method in variational inequalities with multivalued operators given by integrals, Vy Khoi Le
Sub-supersolutions in a variational inequality related to a sandpile problem, Vy Khoi Le
Sub-supersolution theorems for quasilinear elliptic problems: a variational approach, Vy Khoi Le and Klaus Schmitt
Sub-surface electrochemical effects on the spontaneous deposition of cerium conversion coatings on aluminum alloys, Becky L. Treu, Simon Joshi, William R. Pinc, Matt OKeefe, and William Fahrenholtz
Subsurface exploration using the standard penetration test and the cone penetrometer test, J. David Rogers
Subsurface geology of the Mississippi embayment of southeast Missouri, John Gustave Grohskopf
Subsurface hydrological monitoring of a watershed with hybrid sensor networks, John R. Koch, Sahra Sedigh, and Estella A. Atekwana
Subsurface pressure regulation of high pressure condensate wells, John Oscar Farmer
Successfully blending distance students into the on-campus classroom, Susan L. Murray, Sreeram Ramakrishnan, and David Lee Enke
Successful proposal preparation, Mariesa Crow
Successful proposal preparation, Mariesa Crow
Succinate dehydrogenase (Sdh) from Bradyrhizobium japonicum is closely related to mitochondrial Sdh, David J. Westenberg and Mary Lou Guerinot
Sufficiency conditions for constrained optima, Cheng-chun Huang
Suggested improvements for a Wisconsin zinc mill, Raymond Alexander Bingham
Suitability of hot-ion mode tokamaks for commercial power., Joseph Scott Meachum
Suitability of pulse train control technique for BIFRED converter, Mehdi Ferdowsi, M. Telefus, A. Shteynberg, and Ali Emadi
Suitability of Pulse Train/spl trade/, a novel digitally implemented real-time control technique, for BIFRED converter, Mehdi Ferdowsi, M. Telefus, A. Shteynberg, and Ali Emadi
Sulfates of organic diamines: hydrogenbonded structures and properties, Amitava Choudhury
Sulfation and removal of zinc from steelmaking furnace flue dusts., Pinakin Chintamani Chaubal
Sulfation studies of electric furnace flue dust, Jenn-Hwa Pao
Sulfide generation in experimental filled pipes, Muthiah Mariappan
Sulfide mineralogy and fabrics of the iron ores at Benson Mines, New York, Pedro Hugo Tumialán de la Cruz
Sulfide minerals and galena morphological distributions in selected Virburnum Trend ore deposits, Southeast Missouri, Richard Lee Morris
Sulfonation of nylon-6 by solid phase reaction, S. Kwak and Sunggyu Lee
Sulfur-bridged dimers obtained from μ-dithiobis(tricarbonyliron), Dietmar Seyferth, A. Magid Kiwan, and Ekkehard Sinn
Sulfur isotope and minor element geochemistry of sulfides from the Silver Mine district, southeastern Missouri, Sandy K. Balogh
Sulpho-telluride ore, David Lawton Forrester and Harry W. L. Porth
Sulphur extended asphalt in the Missouri State highway system: an impact study., William Michael Dale
Summary report: strength of single l-headers, Roger A. LaBoube
Sun-earth libration point trajectories that avoid the solar exclusion zone, Henry Pernicka and K. C. Howell
Sun-flares glint, Gene Warren Doty
Supercompilers, Robert Paige
Superconducting magnetic energy storage system (SMES) for improved dynamic system performance, Dwaraka S. Padimiti and Badrul H. Chowdhury
Superconducting MgB₂ nanohelices grown on various substrates, Manashi Nath and B. A. Parkinson
Superconducting NbSe₂ nanostructures, Manashi Nath, S. Kar, A. K. Raychaudhuri, and Chintamani Nagesa Ramachandra Rao
Supercritical extraction of organosulfur from coal using acetone-water mixtures, Fouad O. Azzam, Kathy L. Fullerton, Sunil K. Kesavan, and Sunggyu Lee
Supercritical extraction of Stuart oil shale, Sunil K. Kesavan, Amit Ghosh, Mark E. Polasky, Vetkav R. Parameswaran, and Sunggyu Lee
Supercritical fluid extraction and cleanup procedures for determination of xenobiotics in biological samples, Paul Ki-souk Nam, Shubhender Kapila, A. F. Yanders, and Ravi K. Puri
Supercritical fluid extraction and enzyme immunoassay for pesticide detection in meat products, Paul Ki-souk Nam and Jerry W. King
Supercritical fluid process for synthesis of maleated poly(vinylidene fluoride), Kelly Clark and Sunggyu Lee
Supercritical fluid process for the synthesis of maleated poly(vinylidene fluoride), Kelly Clark and Sunggyu Lee
Superfield calculation of loop contribution in extra dimensional theories, Minh Quang Truong
Superfluidity in the solar interior: implications for solar eruptions and climate, B. W. Ninham, Stig Friberg, and Oliver Manuel
Superhard boride-carbide particulate composites, William Fahrenholtz, Eric W. Neuman, Harlan J. Brown-Shaklee, and Greg Hilmas
Superhydrophobic materials as efficient catalysts for hydrocarbon selective oxidation, Chen Chen, Jie Xu, Qiaohong Zhang, Yinfa Ma, Lipeng Zhou, and Min Wang
Superiority of the PCR-based approach for cloning the acetate kinase gene of Clostridium thermocellum, G. Ozcengiz, J-H Kim, E. Ozcengiz, David J. Westenberg, W. R. Lin, L. R. Lynd, and A. L. Demain
Superoxide chemical transformation of diolepoxide polyaromatic hydrocarbon DNA adducts. Determination of benzo[α]pyrene-r-7,t-8,9,c-10-tetrahydrotetrol by gas chromatography, W. Li, Lia Sotiriou-Leventis, Samy Abdel-Baky, D. H. Fisher, and Roger W. Giese
Superoxide oxidation of 1-nitropyrene-cis-dihydrodiols, Samy Abdel-Baky, Lia Sotiriou-Leventis, and Roger W. Giese
Superoxide oxidation of hydroxy- and keto-polyaromatics including internal quinones, W. Li, Lia Sotiriou-Leventis, M. Saha, P. P. Fu, and Roger W. Giese
Superplastic behavior of micro-regions in two-pass friction stir processed 7075Al alloy, Z. Y. Ma, Rajiv S. Mishra, and F. C. Liu
Superplastic deformation behavior of friction stir processed 7075Al alloy, Z. Y. Ma, Rajiv S. Mishra, and Murray W. Mahoney
Superplastic deformation mechanism of an ultrafine-grained aluminum alloy produced by friction stir processing, Yinfa Ma, Rajiv S. Mishra, and F. C. Liu
Superplasticity in cast A356 induced via friction stir processing, Yinfa Ma, Rajiv S. Mishra, and Murray W. Mahoney
Super section speeds development, R. Larry Grayson
Supersonic flutter of shear deformable laminated composite flat panels, Victor Birman and Liviu Librescu
Superstructure costs of short span self-anchored suspension bridges, David J. Peery
Superstructure in RE₂₋ₓFe₄Si₁₄₋y (RE = Y, Gd-Lu) characterized by diffraction, electron microscopy, and Mössbauer spectroscopy, M. K. Han, Y. Q. Wu, M. Kramer, B. Vatovez, Fernande Grandjean, Gary J. Long, and G. J. Miller
Supertransferred hyperfine fields on ¹²¹Sb in antimonates, Fernande Grandjean, Gary J. Long, Geoffrey Longworth, and B. J. Laundy
Supervisory control development of a fuel cell plug-in hybrid electric vehicle, Andrew Meintz, Mehdi Ferdowsi, and Kevin B. Martin
Supervisory control of a face milling operation in different manufacturing environments, Robert G. Landers and A. Galip Ulsoy
Supervisory level identifier for a multimachine power system using radial basis function neural networks, Salman Mohagheghi, Wei Qiao, Ganesh K. Venayagamoorthy, and Ronald G. Harley
Supervisory level neural network identifier for a small power system with a STATCOM and a generator, Salman Mohagheghi, Ganesh K. Venayagamoorthy, and Ronald G. Harley
Supervisory machining control: design approach and experiments, Robert G. Landers and A. Galip Ulsoy
Supplier performance improvement: A study of manufacturing systems with respect to delivery, quality, lead time, and cost performance, Mary Josephine Lakey
Supporting wire interference effects in supersonic near wakes of slender bodies, D. M. Pitt and B. P. Selberg
Support methods in tunnels, W. D. Ortlepp, R. C. M. O'Ferrall, and John W. Wilson
Support of underground excavations in deep-level, hard-rock mines - 1. Thin tabular stopes, John W. Wilson
Support of underground excavations in deep-level, hard-rock mines - 2. Tunnels and other non-tabular excavations, John W. Wilson
Support over cavities of unknown depth for an underground facility, James A. Larson and Donald P. Richards
Support structures extraction for hybrid layered manufacturing, Jianzhong Ruan, Jun Zhang, and Frank W. Liou
Support wire disturbances in near viscous wakes of slender supersonic bodies, K. A. Mirly and B. P. Selberg
Supramolecular hydrogen-bonded structure of a 1:2 adduct of melamine with boric acid, Abhijit Roy, Amitava Choudhury, and Chintamani Nagesa Ramachandra Rao
Supramolecular hydrogen-bonded structures in organic amine squarates, Suresh Mathew, Geo L. Paul, K. Shivasankar, Amitava Choudhury, and Chintamani Nagesa Ramachandra Rao
Surface and internal crystallization in glasses as determined by differential thermal analysis, C. S. Ray, Quanzu Yang, Wen-Hai Huang, and D. E. Day
Surface characterization of cerium based conversion coatings, James O. Stoffer, Thomas J. O'Keefe, X. Lin, E. Morris, Pu Yu, and Scott A. Hayes
Surface characterization of oxygen-plasma treated POSS-based acrylic polymer thin films, Brian H. Augustine, William Christopher Hughes, Kathryn J. Zimmermann, Ashley J. Figueiredo, Xiaowen Guo, and Charles C. Chusuei
Surface composition of respirable silica particles in a set of U.S. anthracite and bituminous coal mine dusts, J. C. Harrison, P. S. Brower, M. D. Attfield, C. B. Doak, M. J. Keane, R. Larry Grayson, and W. E. Wallace
Surface damage of Tangshan earthquake and characteristics of response spectrum of ground movement, S.D. Zhao and H.Q. Fang
Surface deactivation efficiencies for O₂(¹Δ)(g) on a range of materials I, R. P. Crannage, Ernest A. Dorko, D. E. Johnson, and Philip D. Whitefield
Surface deposition and encapsulation of metallic clusters, Jared F. Hund
Surface durability of forged and machined steel gears, T. F. Lehnhoff, Hen-Li Chen, and D. D. Ardayfio
Surface durability of forged machined steel gears, Hen-Li Henry Chen
Surface elastic waves in piezoelectric semiconductors and layered media, Yu-pin Han
Surface electromagnetic waves with damping I. Isotropic Media II. Anisotropic Media, Gary Shannon Kovener
Surface energy determinations in plexiglas, Li-King Chen
Surface energy of liquid copper and its wetting behavior on sapphire substrates, J. Liu and P. D. Ownby
Surface-enhanced Raman-scattering fiber probe fabricated by femtosecond laser, X. Lan, Y. Han, T. Wei, Y. Zhang, L. Jiang, Hai-Lung Tsai, and Hai Xiao Dr.
Surface-enhanced raman scattering microchip fabricated by femtosecond laser, Cheng-Hsiang Lin, Lan Jiang, Hai Xiao Dr., Shean-Jen Chen, and Hai-Lung Tsai
Surface-enhanced Raman scattering microchip fabricated by femtosecond laser, C.-H. Lin, L. Jiang, Hai Xiao Dr., S.-J. Chen, and Hai-Lung Tsai
Surface enhanced Raman scattering silica substrate fast fabrication by femtosecond laser pulses, Yukun Han, Xinwei Lan, Tao Wei, Hai-Lung Tsai, and Hai Xiao Dr.
Surface-enhanced raman spectroscopy using gold-coated horizontally aligned carbon nanotubes, Xiang Nan He, Yang Gao, Masoud Mahjouri-Samani, P. N. Black, J. Allen, M. Mitchell, Wei Xiong, Yunshen Zhou, Lam Jiang, and Yongfeng Lu
Surface enrichment of proteins at quartz / water interfaces: A neutron reflectivity study, Daniel Forciniti and William Hamilton
Surface expressions of discontinuities, and the estimation of their 3-D orientations using combined LiDAR and optical imaging, James Nii Aboh Otoo
Surface fracturing of armatures within helical flux-compression generators, Paul Nicholas Worsey and Jason Baird
Surface interactions between nickel ions and sodium dodecyl sulfate, Ralph Edward Coleman
Surface interpolation using samples taken along straight lines., Steven Edward Turner
Surface mine design and planning for lunar regolith production, Leslie S. Gertsch and R. E. Gertsch
Surface mining systems in Athabasca oil sands: A review of performance, Tad S. Golosinski
Surface modification by preparation of buffer zone in glow discharge plasma, Dong Lyun Cho
Surface modification by vacuum polymerization, Richard Allen Engelman
Surface modification of aluminum alloys to create in situ surface composites by design, Uma Ramadorai
Surface modification of micro-fluidic devices, Zhan Gao
Surface modification of polymethyl methacrylate intraocular lenses with the mixture of acrylic acid and acrylamide via plasma-induced graft copolymerization, T.S. Suh, C.-K. Joo, Y.C. Kim, M.S. Lee, Hyoung-Koo Lee, B.Y. Choe, and H.J. Chun
Surface modification of silica for inkjet paper coatings, Neema Bansal
Surface modification of SU-8 by photografting of functional polymers for lab-on-a-chip applications, Zhan Gao, Chang-Soo Kim, and David Henthorn
Surface morphology of pre-split fractures in plexiglas models, L. G. Carrasco and Lee W. Saperstein
Surface motions of poly(methyl methacrylate), Pornchai Laoharojanaphand, L. Wang, and James O. Stoffer
Surface nitridation of a phosphate glass, Richard K. Brow, Yiming Zhu, D. E. Day, and George W. Arnold
Surface nitridation of phosphate glass at low temperature, Yiming Zhu
Surface physical-chemical characteristics of sludge particulates, Jianmin Wang, C. P. Huang, and H. E. Allen
Surface plasmon-longitudinal optical phonon contribution to the reflectivity of n-type InSb, William Eugene Anderson
Surface Potential and Electric Field Measurements in Plasma Actuators at Low Pressure, T. G. Nichols and Joshua L. Rovey
Surface properties of respirable silicate and aluminosilicate dusts affecting bioavailability, W. E. Wallace, M. J. Keane, J. C. Harrison, J. W. Stephens, P. S. Brower, R. Larry Grayson, V. Vallyathan, and M. D. Attfield
Surface properties of silica in mixed dusts, W. E. Wallace, M. J. Keane, J. C. Harrison, J. W. Stephens, P. S. Brower, R. Larry Grayson, and M. D. Attfield
Surface reactions of boron with clean tungsten substrates, Thomas A. Flaim
Surface reconstruction for interactive modeling of freeform solids by virtual sculpting, Xiaobo Peng, Weihan Zhang, and Ming-Chuan Leu
Surface reconstruction from dexel data for virtual sculpting, Xiaobo Peng, Weihan Zhang, Sai Gowthami Asam, and Ming-Chuan Leu
Surface reconstruction from triple dexel model for virtual sculpting, Weihan Zhang and Ming-Chuan Leu
Surface reconstruction using dexel data from three sets of orthogonal rays, Weihan Zhang and Ming-Chuan Leu
Surface reconstruction using shadow profilometry, Christopher P. Walker, Norbert H. Maerz, and Michael Gene Hilgers
Surface roughness characterization of rock masses using the fractal dimension and variogram, Young-Hoon Lee
Surface segmental mobility and adhesion - effects of filler and molecular mass, Frank D. Blum, Burak Metin, Ravindra Vohra, and Oliver C. Sitton
Surface self-diffusion on nickel (111) by radioactive tracers, James Ronald Wolfe
Surface states at the gallium arsenide-metal interface: preliminary considerations., Steven Richard Goldammer
Surface strain variation in human patellar tendon and knee cruciate ligaments, D. L. Butler, M. Y. Sheh, D. C. Stouffer, V. A. Samaranayake, and Martin S. Levy
Surface structure and chemistry of high surface area silica gels, C. Jeffrey Brinker, Richard K. Brow, David R. Tallant, and R. James Kirkpatrick
Surface structure determination of nanoscale transition metal oxide films using x-ray photoelectron diffraction and low energy electron diffraction, W. A. A. Priyantha
Surface Studies in the Vapor-Solid System Boron Triiodide-Tungsten, P. D. Ownby
Surface switching characteristics of variable permittivity dielectrics, Wayne Huebner and Eric J. Carleton
Surface switching characteristics of variable permittivity dielectrics, Eric J. Carleton and Wayne Huebner
Surface temperature measurement of metal undergoing induction heating, Ding-Yee Nee
Surface treatment and chemical dissolution of samarium-lithium-silicate glasses, Anne Elizabeth Helma
Surface treatment and printing properties of dispersion-coated paperboard, Thomas P. Schuman, Britt Adolfsson, Magnus Wikström, and Mikael Rigdahl
Surface trials of the hydrominer, David A. Summers and Clark R. Barker
Surfactant-assisted synthesis of semiconductor nanotubes and nanowires, Chintamani Nagesa Ramachandra Rao, A. Govindaraj, F. L. Deepak, N. A. Gunari, and Manashi Nath
Surfactant association structures and emulsion polymerization, James E. Funk
Surfactant association structures in stratum corneum, Hamdan Suhaimi
Surfactant-enhanced free radical polymerization of styrene in emulsion gels, Gu Xu and Frank D. Blum
Surfactant enhanced oil recovery by wettability alteration in sandstone reservoirs, Omar ElMofty
Surfactant interactions inpolyvinyl acetate and poly (vinyl acetate—butyl acrylate) latexes, B. R. Vijayendran, Terry Lynn Bone, and C. Gajria
Surveillance of pedestrian bridge traffic using neural networks, R. Joe Stanley, Anand Gopal, Steve Eugene Watkins, and Randy Hays Moss
Surveying practice, Edwin Richard Wash
Surveying unsteady flows by means of movie sequences - a case study, P. Freymouth, W. Bank, and Fathi Finaish
Survey of clustering algorithms, Rui Xu and Donald C. Wunsch
Survey of computer models for multiple seam-multiple system surface mine operations in mountainous terrain, Lee W. Saperstein
Survey of hydraulic drilling performance, Richard Lee Bullock
Survey of routing algorithms for computer networks, Lu Yu
Survey of seepage through heightened earthfill dam with high-density electrical prospecting method 2.11, Yoshikazu Yamaguchi, Hitochi Yoshida, Yutaka Imabayashi, and Tadahiko Sakamoto
Survey of seepage through heightened earthfill dam with high-density electrical prospecting method 2.11, Yoshikazu Yamaguchi, Hitochi Yoshida, Yutaka Imabayashi, and Tadahiko Sakamoto
Survey of the experimental studies on flexible mechanisms, Kwei-Cheng Peng and Frank W. Liou
Survivability of single-walled carbon nanotubes during friction stir processing, L. B. Johannes, Leonard L. Yowell, Edward Sosa, Sivaram Arepalli, and Rajiv S. Mishra
Susceptibility characterization of a cavity with an aperture by using slowly rotating EM fields: FDTD analysis and measurements, Kimitoshi Murano, Ttakeshi Sanpei, Fengchao Xiao, Chen Wang, Yoshio Kami, and James L. Drewniak
Susceptibility scanning as failure analysis tool for system-level electrostatic discharge (ESD) problems, Muchaidze Giorgi, Jayong Koo, Qing Cai, Tun Li, Lijun Han, Andrew Martwick, Kai Wang, Jin Min, James L. Drewniak, and David Pommerenke
Susceptibility scanning system as failure analysis tool for system level ESD problems, Giorgi Muchaidze
Sustainable design through flexible product evolution, Michael Van Wie, Robert B. Stone, and Daniel A. McAdams
Sustainable engineering practices in transportation projects, Kiran Rangarajan
Swarm based systems of systems behavior simulation for network-centric enterprise, Lakshmanan Meyyappan and Cihan H. Dagli
Swarm intelligence and evolutionary approaches for reactive power and voltage control, Ganesh K. Venayagamoorthy, G. Krost, G. A. Bakare, and Lisa L. Grant
Swarm intelligence for digital circuits implementation on field programmable gate arrays platforms, Ganesh K. Venayagamoorthy and Venu Gopal Gudise
Swarm intelligence for transmission system control, Ganesh K. Venayagamoorthy and Ronald G. Harley
Swelling behavior of Illinois coal shale, Scott Lin Huang
Swelling properties of Putnam soil., Oscar M. Palma
Swept-volume computation for virtual reality application of machining simulation, Bilal Y. Maiteh, Ming-Chuan Leu, Denis Blackmore, G. Liu, and L. Abdel-Malek
Switchable mesomorphic materials based on the ferrocene-ferrocenium redox system: Electron-transfer-generated columnar liquid-crystalline phases, R. Deschenaux, M. Schweissguth, M. T. Vilches, A. M. Levelut, Dimitri Hautot, Gary J. Long, and D. Luneau
Sybil detection in vehicular networks, Muhammad Ibrahim Almutaz
S. Y. & F. G. R. R., Thomas H. Millsaps
Symbolic automation and numerical synthesis for robot kinematics, Jen Sriwattanathamma
Symbolic feature-based representation and planning for an agent based robot controller, K. Harbison-Briggs, Robert Mitchell, and K. S. Barber
Symbolic finite differencing-part I, Robert Paige
Symbolic reduction for high-speed power simulation, William M. Siever, Daniel R. Tauritz, Ann K. Miller, Bruce M. McMillin, S. Atcitty, and Mariesa Crow
Symbolic time series analysis using hidden Markov models, Nikhil Bhardwaj
Symbol synchronization and dynamic channel estimation in Multiple Input Multiple Output systems using statistical analysis of eye diagrams, Abhishek Gupte
Symbol synchronization of NRZ waveforms using Haar wavelets/, Tsung-Hsien Liu
Symplectic systems and related discrete quadratic functionals, Martin Bohner
Synchronization of Band-Limited White Gaussian spreading codes, Matthew Steven Long
Synchronization of pulse code modulation telemetry, Lawrence J. Mueller
Synchronous manufacturing: benefits and barriers for small manufacturers, Susan Hollis Burgess
Synchronous reference frame based active filter current reference generation using neural networks, Joy Mazumdar, Ronald G. Harley, and Ganesh K. Venayagamoorthy
Synergistic toxic effect of nano-TiO₂ and As(V) on ceriodaphnia dubia, Demin Wang, Ji Hu, David R. Irons, and Jianmin Wang
Synergy between biology and systems resilience, Ashik Chandra
Syntheses and characterization of 2,2'-biimidazole-containing macromolecules, Judith Marlene Kokorudz
Syntheses and characterization of derivatives of 1,4,7-triazacyclononane, methyl, cholate, and of ionophores based on EDTA, NTA, and IDA, Jyoti Marutrao Dalvi
Syntheses and characterization of polycarbonates based on 1,1′-dihydroxyethyl-2,2′-biimidazole, Harvest L. Collier and Il Young Cho
Syntheses and characterization of transition metal complexes of 2,2′-biimidazole containing polycarbonates, Harvest L. Collier and Il Young Cho
Syntheses and fluorescence of salicylaldimine Schiff base derivatives of 1,1′-Di(aminoethylaminocarbonylalkyl)-2,2′-biimidazole, William M. Barnett, Peris J. Carr, Joseph A. Counsil, and Harvest L. Collier
Syntheses and x-ray investigations within the system FeS₂-CoS₂., Samuel Shu Mou Chan
Syntheses, characterization, and polycondensation of new amide-amine monomers containing 2,2'-biimidazole, William M. Barnett
Syntheses, structure, and a Mössbauer and magnetic study of Ba₄Fe₂I₅S₄, Danielle L. Gray, Gary J. Long, Fernande Grandjean, Raphaël P. Hermann, and James A. Ibers
Synthesis and anticoagulant activity of sodium alginate sulfates, Lihong Fan, Lan Jiang, Yongmei Xu, Yunshen Zhou, Yuan Shen, Weiguo Wie, Zhongheng Long, and Jinping Zhou
Synthesis and applications of imidazolium-based ionic liquids and their polymer derivatives, Woon Su Oh
Synthesis and binding studies of peptide mimetics, anion receptors, and kinase inhibitors, Nanditha G. Nair
Synthesis and characterization of aluminum-polyaniline thin films and membranes, Yan Liu, Matt OKeefe, Ayse Beyaz, and Thomas P. Schuman
Synthesis and characterization of an acrylate polymer containing chlorine-1,3-dioxalane groups in side chains, Zulfiye İlter, Ferhat Alhanlı, Fatih Dogan, and İsmet Kaya
Synthesis and characterization of an X-ray resist, Arlene Saum Koelling
Synthesis and characterization of a series of structurally and electronically diverse Fe(II) complexes featuring a family of triphenylamido-amine ligands, Patrina Paraskevopoulou, Lin Ai, Qiuwen Wang, Devender Pinnapareddy, Rama Acharyya, Rupam Dinda, Purak Das, Remle Çelenligil-Çetin, Georgios Floros, Yiannis Sanakis, Amitava Choudhury, Nigam P. Rath, and Pericles Stavropoulos
Synthesis and characterization of binuclear and unsymmetrical phthalocyanines/, Jiang Yang
Synthesis and characterization of carbon nanotubes grown on montmorillonite clay catalysts, A. Destrée, Gary J. Long, B. Vatovez, Fernande Grandjean, A. Fonseca, J. B. Nagy, and André-Mathieu Fransolet
Synthesis and characterization of complexes of Fe(III), Co(III), Ni(II), Cu(II), Zn(II) and UO₂²⁺ with p-tert-butylcalix[4]arene bearing two imine pendants linked through salicylyl moiety at the lower rim, M. Dey, J. P. Chinta, Gary J. Long, and C. P. Rao
Synthesis and characterization of conducting polymer nanostructures and nanocomposites, Sunil K. Pillalamarri
Synthesis and characterization of conducting polymer nanostructures and their application in sensors, Zhe-Fei Li
Synthesis and characterization of copper(II) complexes of 4-alkyl/aryl-1,2-naphthoquinones thiosemicarbazones derivatives as potent DNA cleaving agents, Zahra Afrasiabi Navan, Prasad Kulkarni, Vinita Ambike, Subhash B. Padhye, Deepti Deobagakar, Mark Heron, Chris Gabutt, Christopher Anson, Annie K. Powell, and Ekkehard Sinn
Synthesis and characterization of improved soy-based epoxy, Amarendra Meka
Synthesis and characterization of liquid crystalline 5, 10, 15, 20-tetrakis(4-n-alkanoyloxyphenyl)porphyrins, Wei Liu, Yuhua Shi, Tongshun Shi, Guofa Liu, Yongxin Liu, Ce Wang, and Wangjin Zhang
Synthesis and characterization of low coordinate divalent aryl transition metal halide analogues of grignard reagents: precursors for reduction to metal-metal-bonded complexes, Andrew D. Sutton, Tailuan Ngyuen, James C. Fettinger, Marilyn M. Olmstead, Gary J. Long, and Philip P. Power
Synthesis and characterization of magnetic iron sulfide nanowires, Manashi Nath, Amitava Choudhury, Asish Kundu, and Chintamani Nagesa Ramachandra Rao
Synthesis and characterization of malic acid capped peptides, Anju Ananthanarayanan
Synthesis and characterization of metal decorated bamboo structured carbon nanotubes for hydrogen storage, Sean Charles Mickey
Synthesis and characterization of metal ion binding polyesters containing 2,2'-biimidazole, Rebecca Lynn Lister
Synthesis and characterization of metal-polyaniline thin films and membranes, Yan Liu
Synthesis and characterization of metal reagents mediating C-X activation (X=Cl, H) of hydrocarbons, Devender Pinnapareddy
Synthesis and characterization of microspheres for controlled release, Gurpartap Singh Sandhu
Synthesis and characterization of nanocrystalline (Zr₀.₈₄Y₀.₁₆)O₁.₉₂-(Ce₀.₈₅Sm₀.₁₅)O₁.₉₂₅ heterophase thin films, Aniruddha Kulkarni, Alexander Bourandas, Junhang Dong, Paul A. Fuierer, and Hai Xiao Dr.
Synthesis and characterization of new 1,1′-diester, diketone, and dinitrile derivatives of 2,2′-biimidazole, M. Barnett, Paula M. Secondo, and Harvest L. Collier
Synthesis and characterization of oligomeric micelles of sodium carboxylates, Bojayan Durairaj and Frank D. Blum
Synthesis and characterization of polycarbonates containing 2,2'-biimidazole, Il Young Cho
Synthesis and characterization of polyimidothioethers, Arlene Saum Koelling, G. Surendran, and William Joseph James
Synthesis and characterization of polymeric [CdBr₂(H₂biim)]n, Colin A. Hester, Harvest L. Collier, and Russell G. Baughman
Synthesis and characterization of polymers derived from the copolymerization of 1,1′-dihydroxyethyl-2,2′-biimidazole and the diglycidyl ether of bisphenol A, Weichen Chi and Harvest L. Collier
Synthesis and characterization of poly-(p-phenylene pyromellitamic acid), Constantine William Tsimpris
Synthesis and characterization of Pt and Pt-Co catalysts for polymer electrolyte membrane fuel cells, Min Chen
Synthesis and characterization of pyruvate-isoniazid analogs and their copper complexes as potential ICL inhibitors, Dipti Shingnapurkar, P. Dandawate, Christopher Anson, Annie K. Powell, Zahra Afrasiabi Navan, Ekkehard Sinn, S. Pandit, K. Venkateswara Swamy, S. Franzblau, and Shreelekha Padhye
Synthesis and characterization of Ru(II) Tris(1,10-phenanthroline)-electron acceptor dyads incorporating the 4-benzoyl-N-methylpyridinium cation or N-Benzyl-N´-methyl-viologen. improving the dynamic range, sensitivity and response time of sol-gel based optical oxygen sensors, Nicholas Leventis, Abdel-Monem M. Rawashdeh, Ian A. Elder, Jinhua Yang, Amala Dass, and Lia Sotiriou-Leventis
Synthesis and characterization of some Schiff base metal complexes, Lili Wang
Synthesis and characterization of soy-based nanocomposites, Ahamed Shabeer, K. Chandrashekhara, and Thomas P. Schuman
Synthesis and characterization of soyhull glycerol derived rigid polyurethane foams, Radhika Chalasani, Shubhender Kapila, K. Chandrashekhara, V. J. Flanigan, and Arun Garg
Synthesis and characterization of styrenic polymer with pendant biimidazole moiety, Geng Lin and Harvest L. Collier
Synthesis and characterization of the metal(I) dimers [Ar'MMAr']: comparisons with quintuple-bonded [Ar'CrCrAr'], Tailuan Nguyen, W. Alexander Merrill, Chengbao Ni, Hao Lei, Gary J. Long, Philip P. Power, James C. Fettinger, Bobby D. Ellis, and Marcin Brynda
Synthesis and characterization of the physical, chemical and mechanical properties of isocyanate-crosslinked vanadia aerogels, H. Luo, J. Schnobrich, Sudhir Mulik, Y. Zhang, B. P. Grady, A. Capecelatro, Lia Sotiriou-Leventis, Hongbing Lu, Nicholas Leventis, Gitogo Churu, Amala Dass, Eve F. Fabrizio, and Abigail Hobbs
Synthesis and characterization of two intensely colored tris(benzoylcyanoxime)iron(II) anionic complexes, T. Owen, Fernande Grandjean, Gary J. Long, K. V. Domasevitch, and N. Gerasimchuk
Synthesis and characterization of two spin-glass phases of FeMo₄Ge₃, Peter J. Baker, Peter D. Battle, Stephen J. Blundell, Fernande Grandjean, Tom Lancaster, Gary J. Long, Sophie E. Oldham, and Timothy J. Prior
Synthesis and characterization of urethane polymers containing 2,2′-biimidazole, Frank Jian-Lin Liu, J. S. Kokorudz, and Harvest L. Collier
Synthesis and characterization of water reducible MMA-MMA copolymers, Hua-Jung Hu
Synthesis and characterization of X-ray resists, Arlene Saum Koelling
Synthesis and chromatographic application of bonded, monomolecular polymer films on silicic supports, Walter A. Aue, Corazon R. Hastings, and Shubhender Kapila
Synthesis and CMC studies of 1-methyl-3-(pentafluorophenyl)methylimidazolium quaternary salts, Ayse Beyaz, Woon Su Oh, and Prakash Reddy
Synthesis and composition evolution of bimetallic Pd-Pt alloy nanoparticles, Guoqiang Ren, Honglan Shi, and Yangchuan Xing
Synthesis and crystal structure of 1,1′-di(ethylpropionato)-2,2′-biimidazole, a macromolecular precursor, William M. Barnett, Russell G. Baughman, Harvest L. Collier, and W. G. Vizuete
Synthesis and crystal structure of bis-μ-(5-chloro-2-hydroxy-N-methyl-α-phenylbenzylideneiminato-N,O)- bis[ethanol(nitrato-O,O′)nickel(II)]: A new type of nickel(II) dimer, Raymond J. Butcher, Jerry P. Jasinski, Garry M. Mockler, and Ekkehard Sinn
Synthesis and crystal structure of tris[1-(2-azoyl)-2-azabuten-4-yl]amineiron(III), [Fe((pyrol)₃tren)], P. Greig Sim and Ekkehard Sinn
Synthesis and dynamics of oligomeric micelles, Bojayan Durairaj and Frank D. Blum
Synthesis and electrochemical characterization of uniformly-dispersed high loading Pt nanoparticles on sonochemically-treated carbon nanotubes, Yangchuan Xing
Synthesis and electropolymerization of 2-(3-Thienylethyl)-3-thiopheneacetate, Nicholas Leventis, Lia Sotiriou-Leventis, Sudhir Mulik, and Amala Dass
Synthesis and evaluation of soyhull derived rigid polyurethane foams, Radhika Chalasani
Synthesis and fading of eighteenth-century Prussian blue pigments: A combined study by spectroscopic and diffractive techniques using laboratory and synchrotron radiation sources, L. Samain, Fernande Grandjean, Gary J. Long, P. Martinetto, P. Bordet, J. Sanyova, and D. Strivay
Synthesis and hydrolytic stability of tert-Butoxydimethylsilyl enol ethers, Zacharia A. Fataftah, Abdel-Monem M. Rawashdeh, and Lia Sotiriou-Leventis
Synthesis and mesogenic properties of binuclear copper (II) complexes derived from salicylaldimine schiff bases, Reinhard Paschke, Stefan Liebsch, Carsten Tschierske, Michael A. Oakley, and Ekkehard Sinn
Synthesis and microstructural characterization of unsupported nanocrystalline zirconia thin films, Brian P. Gorman and Harlan U. Anderson
Synthesis and Mössbauer effect study of several novel bridged derivatives of Me₂Si[(η⁵-C5H₄)₂Fe₂(CO)₄] and the crystal structure of Me₂Si[(η⁵-C5H₄)₂(CO)Fe(μ-CO)₂Fe(Ph₂PCH₂PPh₂)], M. E. Wright, Gary J. Long, Dwayne E. Tharp, and G. O. Nelson
Synthesis and near IR photoluminescence of Os(II) bis(2,2´-bipyridine) (3,8-diarylethynyl-1,10-phenanthroline) complexes: anomalous behavior in the 3,8-dinitrophenylethynyl-substituted homologue, Jinhua Yang, Lia Sotiriou-Leventis, D. S. Tyson, Nicholas Leventis, and Amala Dass
Synthesis and near IR photoluminescence of Os(II) bis(2,2′- bipyridine) (3,8-diarylethynyl-1,10-phenanthroline) complexes: Anomalous behavior in the 3,8-dinitrophenylethynyl-substituted homologue, Jinhua Yang, Amala Dass, Lia Sotiriou-Leventis, D. S. Tyson, and Nicholas Leventis
Synthesis and performance evaluation of soybased aliphatic polyurethane nanocomposites for pultrusion, Rama Bhadra Raju Vuppalapati, V. G. K. Menta, K. Chandrashekhara, and Thomas P. Schuman
Synthesis and properties of a new multiblock copolymer based on PEO, Geng Lin and Harvest L. Collier
Synthesis and properties of bis[N-R-(5-chloro-α-phenyl-2-hydroxybenzylidene)aminato]copper(II) complexes and crystal and molecular structures of the derivatives with R = n-butyl and R = isobutyl (two structural isomers), P. C. Chia, Derek P. Freyberg, Garry M. Mockler, and Ekkehard Sinn
Synthesis and properties of cadmium manganese ferrites, B. W. Jong
Synthesis and properties of conducting films by plasma polymerization, Rajender K. Sadhir and William Joseph James
Synthesis and properties of conducting films by plasma polymerization of tetramethyltin, Rajender K. Sadhir and William Joseph James
Synthesis and properties of molybdenum(VI) peroxo compounds with imidazole and the X-ray structure of (C₃H₅N₂)₂[OMoO(O₂)₂H₂O₂], a novel imidazolium peroxo complex containing a μ-oxo bridged dimer, Cirila Djordjevic, J. L. Gundersen, Bradley A. Jacobs, and Ekkehard Sinn
Synthesis and properties of peroxo α-amino acid complexes of molybdenum(VI), Cirila Djordjevic, Nikola Vuletic, and Ekkehard Sinn
Synthesis and properties of thio containing aromatic copolyimides, James O. Stoffer and Youbang Liu
Synthesis and properties of transition-metal arsenide nanostructures: from superparamagnetism to superconductivity, Prachi Desai
Synthesis and relation between magnetic and structural properties of a series of monomeric and dimeric nickel(II) complexes, Raymond J. Butcher and Ekkehard Sinn
Synthesis and relation between magnetism and structure of a trinuclear copper(II) hydroxo complex [Cu₃OHL₃(ClO₄)]ClO₄ and a hexanuclear copper(II) oxo complex [Cu₃OL′₃(ClO₄)]₂ (LH = 3-(phenylimino)butanone 2-oxime, L′H = 1,2-diphenyl-2-(methylimino)ethanone 1-oxime), Raymond J. Butcher, Charles J. O'Connor, and Ekkehard Sinn
Synthesis and relation between magnetism and structure of the binuclear copper(II) oxime complex [Cu₂L₂(ClO₄)₂]·[Cu₂L₂(CH₃OH)₂](ClO₄)₂, where HL = 1-(N,N-dimethyl-2-aminoethyl)-1-phenyl-2-oximopropane, Raymond J. Butcher, Charles J. O'Connor, and Ekkehard Sinn
Synthesis and relation between the structure and magnetism of the dimeric anionic nickel(II) complex [C₅H₁₀NH₂]+[Ni₂(PhSal)₄CH₃COO]-, Raymond J. Butcher, Charles J. O'Connor, and Ekkehard Sinn
Synthesis and restructuring of inorganic nano-particles in counterflow diffusion flames, Yangchuan Xing, Ümit Özgür Köylü, and Daniel E. Rosner
Synthesis and spectroscopic characterization of 2,7-diazapyrenium compounds, Zhan Mao
Synthesis and spectroscopic properties of the elusive 3a,9a-diazaperylenium dication, Lia Sotiriou-Leventis, Abdel-Monem M. Rawashdeh, Woon Su Oh, and Nicholas Leventis
Synthesis and structural characterisation of the isotypic complexes MᴵᴵL₂(py)₂·2H₂O (M = Cu, Zn); the interplay of lattice imposed ligand disposition and Jahn-Teller distortions [HL = 5-(4-methoxyphenyl)pyrazole-3-carboxylic acid], Jonathan D. Crane, O. Danny Fox, and Ekkehard Sinn
Synthesis and structure of trans -[[[cis -tetracarbonylbis (N-((2-diphenylphosphinamido)ethyl)salicylaldimino-P)]molybdenum(0)]-N,-N′ ,O,O′]nickle(II), a novel bimetal trans-ligating tetradentate schiff base complex with a “fly-over” chain containing a metal atom, Charles S. Kraihanzel, Ekkehard Sinn, and Gary M. Gray
Synthesis and structures of the [MoFe₆S₆(CO)₁₆]²⁻, [MoFe₄S₃(CO)₁₃(PEt₃)]²⁻, and [Mo₂Fe₂S₂(CO)₁₂]²⁻ ions: High-nuclearity Mo-Fe-S clusters as potential precursors to models for the FeMo-cofactor of nitrogenase, Patricia A. Eldredge, Kurethara S. Bose, Daniel E. Barber, Robert F. Bryan, Ekkehard Sinn, Arnold L. Rheingold, and Bruce A. Averill
Synthesis and tandem mass spectrometric characterization of tailored co-oligopeptides, Santhana Srinivasan, hareesh Palli, Shubhender Kapila, Daniel Forciniti, and Paul Ki-souk Nam
Synthesis and thermal behavior of Poly(Methyl Acrylate) attached to silica by surface-initiated ATRP, Manikantan B. Nair and Frank D. Blum
Synthesis and toxicity studies of imidazolium-based ionic liquids, Ninu Madria
Synthesis and x-ray crystal structures of the first tetrahedral osmium(IV) compounds, tetrakis(cyclohexyl)osmium(IV) and tetrakis(o-methylphenyl)osmium(IV), Robert P. Tooze, Pericles Stavropoulos, Majid Motevalli, Michael B. Hursthouse, and Geoffrey Wilkinson
Synthesis and X-ray crystal structures of two 14-vertex di-iron tetracarbon metallocarbaboranes, William M. Maxwell, Ekkehard Sinn, and Russell N. Grimes
Synthesis and x-ray structure of the [Fe₄S₄(CO)₁₂]²⁻ ion: An example of intermolecular disulfide formation by the (μ-S)₂Fe₂(CO)₆ unit, Kurethara S. Bose, Ekkehard Sinn, and Bruce A. Averill
Synthesis, characterization and application of Pd-Pt bimetallic nanoparticles and carbon nanotubes supported nanocomposites, Guoqiang Ren
Synthesis, characterization and applications of magnetite nanoparticles, Vikram Kumar Kanmukhla
Synthesis, characterization and application studies of copolyimides, Youbang Liu
Synthesis, characterization and crystal structure of 2-dicyanomethylene-1,3-bis(ferrocenylmethyl)-1,3-diazolidine, Angel Benito, Juan M. Cano, Ramon Martínez-Máñez, Jordi J. Payá, Juan Ignacio Soto, Miguel Julve, Francesc Lloret, M. D. Marcos, and Ekkehard Sinn
Synthesis, characterization, and evaluation of rhodamine based sensors for nerve gas mimics, Aruna J. Weerasinghe, Carla S. Schmiesing, and Ekkehard Sinn
Synthesis, characterization, and kinetic study of functional polystyrenes, Fatih Dogan, İsmet Kaya, Osman Dayan, and Eyüp Özdemir
Synthesis, characterization, and ligand substitution of [HFe₄(CO)₁₂BH]-: An isoelectronic and isoprotonic inorganometallic analogue of Hfe₄(CO)₁₂CH, C. E. Housecroft, Margaret Linn Buhl, Gary J. Long, and Thomas P. Fehlner
Synthesis, characterization, and magnetism of divalent aryl transition-metal complexes of the simplest dialkylamide, Nme₂: Rare T-shaped coordination at chromium, Chengbao Ni, Gary J. Long, Fernande Grandjean, and Philip P. Power
Synthesis, characterization, and reactivity of ferrous and ferric oxo/peroxo pivalate complexes in relation to Gif-type oxygenation of substrates, Remle Çelenligil-Çetin, Richard J. Staples, and Pericles Stavropoulos
Synthesis, characterization, and reactivity of iron trisamidoamine complexes that undergo both metal- and ligand-centered oxidative transformations, Remle Çelenligil-Çetin, Patrina Paraskevopoulou, Rupam Dinda, Richard J. Staples, Ekkehard Sinn, Nigam P. Rath, and Pericles Stavropoulos
Synthesis, characterization, and structure of a novel hexanuclear iron-sulfur-carbonyl cluster, the [Fe₆S₆(CO)₁₂]²⁻ ion, Gay L. Lilley, Ekkehard Sinn, and Bruce A. Averill
Synthesis, characterization, and thermal degradation kinetics of poly(decamethylene 2-oxoglutarate), Fatih Dogan, Hakan Akat, Mehmet Balcan, İsmet Kaya, and Mehmet Yürekli
Synthesis, characterization and thermal degradation kinetics of poly(imino isophthaloyl imino (2,4,8,10-tetraoksoaspiro [5,5] undekan-3,9-dipropylene)), Fatih Dogan, Hakan Akat, and İsmet Kaya
Synthesis, characterization and thermal study of some tetradentate Schiff base transition metal complexes, Fatih Dogan, Mahmut Ulusoy, Ömer F. Öztürk, İsmet Kaya, and Bekir Salih
Synthesis, characterization, conductivity, band gap, and kinetic of thermal degradation of poly-4-[(2-mercaptophenyl) imino methyl] phenol, İsmet Kaya, Fatma Baycan, and Fatih Dogan
Synthesis, chemistry, electronic properties, and magnetism in the Y-Ba-Cu-O superconductor systems, Ruth Jones, Michael F. Ashby, Archie M. Campbell, Peter P. Edwards, Martin R. Harrison, Andrew D. Hibbs, D. A. Jefferson, Angus I. Kirkland, Thitinant Thanyasiri, and Ekkehard Sinn
Synthesis, densification, and mechanical properties of TaB₂, Xiaohong Zhang, Greg Hilmas, and William Fahrenholtz
Synthesis for four-position motion generation of planar four-bar mechanisms, Ching-Nan Wang
Synthesis for three position function generation with planar four bar mechanisms, Cheensun Lin
Synthesis gas production by noncatalytic reforming of glycerin in supercritical water: effect of reaction temperature, Jason W. Picou, Jonathan E. Wenzel, Michael S. Stever, Jared Bouquet, and Sunggyu Lee
Synthesis heuristics for large asynchronous sequential circuits, Robert Judson Smith
Synthesis involving waste carbon dioxide, Glenn Eldon Brand
Synthesis of 1,2,3,4-tetraphenyl-9,10,16,17,23,24- hexadodecyloxyphthalocyanine, Jiang Yang, T. C. Rogers, and Michael R. Van-De-Mark
Synthesis of active distributed RC networks via the W=e[superscript square root of s] transmission, Roy Dale Hensley
Synthesis of aerogel-metal cluster composites by gamma radiolysis, Massimo F. Bertino, Jared F. Hund, Guo-Hui Zhang, Lia Sotiriou-Leventis, Nicholas Leventis, Akira T. Tokuhiro, and John Farmer
Synthesis of a family of solids through the building-block approach: A case study with Ag+ substitution in the ternary Na-Ge-Se system, Amitava Choudhury, Sabine Strobel, Benjamin R. Martin, Angela L. Karst, and Peter K. Dorhout
Synthesis of a new class of Mo-Fe-S clusters containing the MoS₂Fe₂ unit, Kurethara S. Bose, P. E. Lamberty, Julie E. Kovacs, Ekkehard Sinn, and Bruce A. Averill
Synthesis of a stable compound with fivefold bonding between two chromium(I) centers, Tailuan Nguyen, Andrew D. Sutton, Marcin Brynda, James C. Fettinger, Gary J. Long, and Philip P. Power
Synthesis of binuclear phthalocyanines sharing a benzene or naphthalene ring, Jiang Yang and Michael R. Van-De-Mark
Synthesis of borehole strain and GPS observations, Stephen S. Gao, A. T. Linde, and Paul G. Silver
Synthesis of chemical process arrangements by mixed integer optimization., Virendar Singh Bakhshi
Synthesis of compliant single-strip mechanisms that may be represented by a single dyad, Sharath K. Kolachalam
Synthesis of corrosion-inhibiting polythioesters, J. W. Truesdell and Michael R. Van-De-Mark
Synthesis of crosslinkable water reducible acrylic copolymers for coatings, Mandar R. Bhave
Synthesis of dihydropyrans via Pd-catalyzed cyclization of 2-allyl-1,3-dicarbonyl compounds and vinylic triflates or halides, Prakash Reddy
Synthesis of double-input DC-DC converters using a single-pole triple-throw switch as a building block, Mehdi Ferdowsi and Karteek Gummi
Synthesis of filters using distributed RC networks, Mario Nader Nader
Synthesis of four bar linkages with specified ground pivots, Richard Loerch, Arthur G. Erdman, George N. Sandor, and Ashok Midha
Synthesis of functionalized N-isopropylacrylamide copolymers and study of their adsorption characteristics in selective entrapment of cations, Sita S. Akella
Synthesis of fused silica by flame hydrolysis, James Edward Rourke
Synthesis of Geneva mechanisms with finite angular jerk, Jeffrey Eugene Edmison
Synthesis of gold nanoparticles attached to polypyrrole nanofibers, Sunil K. Pillalamarri, Frank D. Blum, and Massimo F. Bertino
Synthesis of harmonic motion generating linkages - part i: function generation, K. Farhang, Ashok Midha, and A. K. Bajaj
Synthesis of harmonic motion generating linkages - part ii: path and motion generation, K. Farhang, Ashok Midha, and Allen Strickland Hall
Synthesis of homogeneous alloy metal nanoparticles in slica aerogels, Guo-Hui Zhang, Lia Sotiriou-Leventis, Nicholas Leventis, Massimo F. Bertino, and Jared F. Hund
Synthesis of hydrazone functionalized epoxy polymers for non-linear optical device applications, Rajendra K. Singh
Synthesis of hydrocarbons from dimethyl ether: selectivities towards light hydrocarbons, Abhay Sardesai, Timothy Tartamella, and Sunggyu Lee
Synthesis of hydroxy acid capped peptides and assessment of their susceptibility to enzymatic hydrolysis, Srinivasa Reddy Gorla
Synthesis of iron oxide nanoparticles in a counterflow diffusion flame reactor, Hector Enrique Ruiz
Synthesis of linear aliphatic polysulfides, Emerentiana Sianawati and Michael R. Van-De-Mark
Synthesis of linear aliphatic polysulfides and their corrosion inhibiting effects, Emerentiana Sianawati
Synthesis of metal oxide nanorods using carbon nanotubes as templates, B. C. Satishkumar, A. Govindaraj, Manashi Nath, and Chintamani Nagesa Ramachandra Rao
Synthesis of methyl acetate from dimethyl ether using group VIII metal salts of phosphotungstic acid, Abhay Sardesai, Sunggyu Lee, and Timothy Tartamella
Synthesis of methyl acetate from dimethyl ether using group viii metal salts of phosphotungstic acid, Abhay Sardesai, Sunggyu Lee, and Timothy Tartamella
Synthesis of MFI zeolite films on optical fibers for detection of chemical vapors, Hai Xiao Dr., Jian Zhang, Junhang Dong, Ming Luo, Robert Lee, and Van Romero
Synthesis of modified PbTiO₃ powders and fibers by a liquid mix process, Chen-Lung Fan, Daniel A. Ciardullo, and Wayne Huebner
Synthesis of nanostructured conducting polymers and their application as gas sensors, Zhe-Fei Li
Synthesis of nickel nanoparticles by gamma-radiation and femtosecond laser ablation, Vivek Murlidhar Rao
Synthesis of nickel nanoparticles on multi-walled carbon nanotubes by gamma irradiation, V. M. Rao, Carlos H. Castano, J. Rojas, and A. J. Abdulghani
Synthesis of nitrogen-doped diamond films using vibrational excitation of ammonia molecules in laser-assisted combustion flames, Lisha Fan, Zhi Qiang Xie, Jongbok Park, Xiang Nan He, Yunshen Zhou, Lan Jiang, and Yongfeng Lu
Synthesis of organogermanium films by glow discharge polymerization, Rajender K. Sadhir, William Joseph James, and Robert A. Auerbach
Synthesis of planar for bar mechanism to achieve specified extreme position angles, Yeou-Heng Kuang
Synthesis of planar linkage via loop closure and nonlinear equations solution, Ashok Midha and Z.-L. Zhao
Synthesis of polyaniline-gold nanocomposites using "grafting from" approach, Sunil K. Pillalamarri, Frank D. Blum, and Massimo F. Bertino
Synthesis of polyaniline-gold nanocomposites using “grafting from” approach, Sunil K. Pillalamarri, Frank D. Blum, and Massimo F. Bertino
Synthesis of radioactive and nonradioactive nanostructures through radiolytic and wet chemistry, Jessika Viviana Rojas Marin
Synthesis of rhenium oxide nanoparticles (RexOy) by gamma irradiation, J.V. Rojas and Carlos H. Castano
Synthesis of selected electron donors and acceptors and study of inter/intramolecular electron transfer from ruthenium (II) complexes in solution, frozen matrix and silica aerogels as the basis for optical devices, Abdel-Monem M. Rawashdeh
Synthesis of shape memory alloys using electrodeposition, Timothy Roy Hymer
Synthesis of single-input and multiple-output port mechanisms with springs for specified energy absorption, J. G. Jenuwine and Ashok Midha
Synthesis of solid and spirally cracked TiO₂ fibers by a liquid mix process, Chen-Lung Fan, Daniel A. Ciardullo, and Wayne Huebner
Synthesis of substituted phenothiazines analogous to methylene blue by electrophilic and nucleophilic aromatic substitutions in tandem. A mechanistic perspective, Nicholas Leventis, Muguo Chen, and Lia Sotiriou-Leventis
Synthesis of superconducting nanocables of FeSe encapsulated in carbonaceous shell, Sukhada Mishra, Kai Song, Jakub A. Koza, and Manashi Nath
Synthesis of surface composites using friction stir processing, Bharat Gattu
Synthesis of surface initiated polyaniline-silica nanocomposites, Frank D. Blum, Sunil K. Pillalamarri, and Massimo F. Bertino
Synthesis of transition metal substituted large crystal zeolite ZSM-5, Tara Lyn Schaeffer
Synthesis of unity-gain RC networks from second degree transfer functions., Ronald L. McNally
Synthesis of uranium phosphate phases and potential retardation effects on spent fuel radionuclides, Andrew S. Turner
Synthesis of vegetable oil derived polyurethanes, Amber R. Tupper, Barbara A. Wheelden, and Sunggyu Lee
Synthesis, reactivity, and catalytic behavior of iron/zinc-containing species involved in oxidation of hydrocarbons under Gif-type conditions, Bharat Singh, Jeffrey R. Long, Fabrizia Fabrizi De Biani, Dante Gatteschi, and Pericles Stavropoulos
Synthesis, sintering and dielectric properties of nano structured high purity titanium dioxide, Sheng Chao and Fatih Dogan
Synthesis, solubilization, and polymerization in new surfactant systems, Yuh-Jye Uang
Synthesis, structure, and a Mössbauer and magnetic study of Ba₄Fe₂I₅S₄, Danielle L. Gray, Gary J. Long, Fernande Grandjean, Raphaël P. Hermann, and James A. Ibers
Synthesis, structure, and characterization of the [Fe₅S₄(CO)₁₂]²⁻,⁻ ions and studies on the oxidative conversion of the dianion to [Fe₆S₆(CO)₁₂]²⁻, Daniel E. Barber, Michal L. Sabat, Ekkehard Sinn, and Bruce A. Averill
Synthesis, structure and optical properties of quaternary seleno-gallates NaLnGa₄Se₈ (Ln = Ce, Nd) and their comparison with the isostructural thio-gallates, Amitava Choudhury and Peter K. Dorhout
Synthesis, structure and properties of manganese(II) complexes with aroylhydrazones of 2-pyridinecarboxaldehyde, Amitava Choudhury, Banda Geetha, Nimma Rajaiah Sangeetha, Vanaparthi Kavita, Vishnubhatla Susila, and Samudranil Pal
Synthesis, structure, and properties of trichloro- and tribromo(2-(2′-pyridyl)quinoline)gold(III), Charles J. O'Connor and Ekkehard Sinn
Synthesis, structure, and properties of trichloro- and tribromo-(2,9-dimethyl-1,10-phenanthroline)gold(III), W. T. Robinson and Ekkehard Sinn
Synthesis, structure, and the unusual magnetic properties of an amine-templated iron(II) sulfate possessing the Kagome lattice, Amitava Choudhury, Chintamani Nagesa Ramachandra Rao, Echur Varadadesikan Sampathkumaran, Rajamani R. Nagarajan, Geo L. Paul, and Jashoda N. Behera
Synthesis, structure, magnetic and optical properties of ternary thio-germanates: Ln₄(GeS₄)₃ (Ln = Ce, Nd), Amitava Choudhury and Peter K. Dorhout
Synthesis, structures, and properties of layered quaternary chalcogenides of the general formula AlnEQ₄ (A = K, Rb; Ln = Ce, Pr, Eu; E = Si, Ge; Q = S, Se), Amitava Choudhury, Larisa A. Polyakova, Ingo Hartenbach, Thomas Schleid, and Peter K. Dorhout
Synthesis, structure, spectroscopy and antitumor activity of hydroxy naphthoquinone thiosemicarbazone and its metal complexes against MCF-7 human breast cancer cell line, D. K. Saha, Subhash B. Padhye, Ekkehard Sinn, and Chris Newton
Synthesis, X-ray characterization, structural and magnetic studies of a new class of iso-structural BiMO₃ compounds, Joseph Donato Bucci
Synthetic aperture radar-based techniques and reconfigurable antenna design for microwave imaging of layered strutures, Mojtaba Fallahpour
Synthetic approaches for intermediates of 1,8-naphthalene phthalocyanines, Alexander Albert Williams
Synthetic approaches to gem-difluoromethylene compounds, Meher Perambuduru, Prakash Reddy, and Ramesh Alleti
Synthetic fuels : Alternate energy sources for the 21st century, Samuel Frimpong and Y. Li
Synthetic ligand-receptor interactions, Nicholas A. Peppas, Y. Rosa Zheng, and David Henthorn
Synthetic methods for biologically relevant organofluorine compounds, Meher Perambuduru
Synthetic, structural, magnetic, and Mössbauer spectral study of Fe[HC(3,5-Me₂pz)₃]₂I₂ and its spin-state crossover behavior, Daniel L. Reger, C. A. Little, Mark D. Smith, Arnold L. Rheingold, K. C. Lam, T. L. Concolino, Gary J. Long, Raphaël P. Hermann, and Fernande Grandjean
Synthons and design in metal phosphates and oxalates with open architectures, Amitava Choudhury, Chintamani Nagesa Ramachandra Rao, Srinivasan R. Natarajan, Sharma Neeraj, and V. Ramamurthy
System and Method for Quantitative Imaging of Chemical Composition to Decompose More than Two Materials, Xin Liu, L. Yu, and C. H. McCollough
System and Method for Quantitative Imaging of Chemical Composition to Decompose Multiple Materials, Xin Liu, L. Yu, and C. H. McCollough
Systematic functional and object-oriented product design frameworks, Jen-Chi Wu
Systematic measurements of splitting parameters of P-to-S converted phases from mantle discontinuities, Stephen S. Gao and Kelly H. Liu
Systematic procedure for the analysis of multiply branched acoustic transmission lines, Walter Eversman
System definition of a small, economical general purpose computer, Thomas Elden Kreger
System design of an industrial controller., Hugo Miguel Canizares
System design of a special purpose micro-computer., Richard William Fowler III
System drivers in the performance of auxiliary ventilation systems, R. S. Suglo, Samuel Frimpong, and I. R. Muirhead
System dynamic analysis by computer-based component-mode synthesis technique, Yu-Tsang Cheng
System evaluation and description using abstract relation types (ART), Joseph J. Simpson, Ann K. Miller, and Cihan H. Dagli
System for heating bulk materials, Nassib Aouad and J. Kennedy
System for rapidly boring through materials, W. A. Berger, J. A. Carter, C. Davey, Marian Mazurkiewicz, R. M. Pell, and R. A. Spalletta
System identification using a batch processing filter and Haar function wavelets, William Ray Bockman
System integration and control oriented modeling of the laser aided manufacturing process (LAMP), Mallikharjuna R. Boddu
System integration and real-time control architecture of a laser aided manufacturing process, Mallikharjuna R. Boddu, Robert G. Landers, Srinivas Musti, Sanjeev Agarwal, Jianzhong Ruan, and Frank W. Liou
System level ESD failure mechanisms, analysis and test method, Kai Wang
System modeling and control of smart structures, Frank J. Kern, Leslie Robert Koval, K. Chandrashekhara, and Vittal S. Rao
System modeling and rapid development, Joyce Schofield and Cihan H. Dagli
System modeling and vibration reduction of a flexible beam under rotary motion, Jui-Hung Chien
System of systems architecture generation and evaluation using evolutionary algorithms, Joseph J. Simpson and Cihan H. Dagli
System of systems: Power and paradox, Joseph J. Simpson and Cihan H. Dagli
System performance of an indirect collector storage preheater in series with a conventional electric resistance water heater, A. M. Boies and Kelly Homan
System reliability analysis with saddlepoint approximation, Xiaoping Du
Systems approach for estimating field moisture content, Thomas M. Petry, Yuh-Puu Han, and David Newton Richardson
Systems architecting heuristics for systems engineering management and embedded systems engineering, Mark S. Anderson and Cihan H. Dagli
Systems engineering as applied to Public Works Engineering Administration Educational Training Program, Seid Hossein Abtahi
Systems methodology and framework for problem definition in mobile ad hoc networks, Reghu Anguswamy, Maheswaran Thiagarajan, and Cihan H. Dagli
Systems modeling of distribution power networks., Darold Lee Phillips
Systems validation, Thomas Weigert
System transfer function identification by gradient techniques., Javad Salahi
Systolic algorithm for processing RLE images, Hao Feng, Fikret Erçal, and Filiz Bunyak
Tailored safety training for miners in small pennsylvania surface coal mines, D. Passmore, J. Bennett, M. Radomsky, and Lee W. Saperstein
Tailoring spin-orbit torque in diluted magnetic semiconductors, Hang Li, Xuhui Wang, Fatih Dogan, and Aurelien Manchon
Tailoring the gross morphology of the tendon-to-bone insertion for the reduction of stress concentrations, Yanxin Liu, Victor Birman, Chanqing Chen, Stavros Thomopoulos, and Guy M. Genin
Tailoring the properties of ceramic-based composites using co-extrusion processing, Greg Hilmas and Jeremy Lee Watts
Taking the pulse of the Saharan Metacraton, Stephen S. Gao and Mohamed G. Abdel Salam
Tandem differential mobility analyzer studies and aerosol volatility, Otmar Schmid
Tandem supercritical fluid extraction and liquid chromatography system for determination of chlorinated phenols in solid matrices, M. H. Liu, Shubhender Kapila, Paul Ki-souk Nam, and A. A. Elseewi
Tank farm construction over soft organic Clays- A case history, Syed Ahmed
Tank studies of the resistivity horizontal profiling method of electrical prospecting., Edward Hornsey
Tapered cylindrical cantilever beam retrofitted with steel reinforced polymer or grout, Bryce L. Barton, Mahesh S. Shetty, Victor Birman, and Lokeswarappa R. Dharani
Tapered cylindrical cantilever beam retrofitted with steel reinforced polymer or grout, Bryce L. Barton, Mahesh S. Shetty, Victor Birman, and Lokeswarappa R. Dharani
Tarbela reservoir a question of induced seismicity, S. K. Mahdi
Target detection and feature evaluation of airborne mine target images, Deepika Kamakshi Timmavajjula
Target Feedback Loop/Loop Transfer Recovery (TFL/LTR) robust control system designs, Rajiva Prakash
Targeting triple negative breast cancer cells by N³-substituted 9,10-Phenanthrenequinone thiosemicarbazones and their metal complexes, Zahra Afrasiabi Navan, P. Stovall, K. Finley, Amitava Choudhury, C. Barnes, A. Ahmad, Fazlul H. Sarkar, A. Vyas, and Shreelekha Padhye
Target interception with cost-based observer, Venkat Durbha, S. N. Balakrishnan, and Walter Dyer
Tar sand mining in Canada - A technological challenge, F. G. Boehm and Tad S. Golosinski
TaS₂ nanoplatelets produced by laser ablation, K. Y. Chick, Manashi Nath, and B. A. Parkinson
Tauberian theorems for convergence and subsequential convergence of sequences with controlled oscillatory behavior, Fi̇li̇z Di̇k
Tauberian theorems for generalized Abelian summability methods, ʻbrahi̇m ßanak
Tauberian theorems for sequences with moderately oscillatory control moduli, Mehmet Di̇k
Tax depletion problems of the Tri-state district, Glenn Angus Dooley
Taxol-stabilized microtubules can position the cytokinetic furrow in mammalian cells, Katie Shannon, J. C. Canman, C. B. Moree, J. S. Tirnauer, and E. D. Salmon
Taxonomic study of fossil and recent otoliths of certain cuskeels, Gary Neal Pointer
Taxonomy of systems-of-systems, James Gideon and Cihan H. Dagli
TBM performance prediction in yucca mountain welded tuff from linear cutter tests, R. Gertsch, O. Levent, and Leslie S. Gertsch
TCE diffusion to the atmosphere in phytoremediation applications, Xingmao Ma and Joel Gerard Burken
Tchebycheff approximation on a discrete point set: algorithms old and new, William Edward McBride
Te ¹³⁰-Xe¹³⁰ age determinations of tellurium minerals, B. Srinivasan, E. C. Alexander, and Oliver Manuel
Teaching a 'highly exceptional' text: Krupabai Satthianadhan's Saguna and Narratives of Empire, Kristine Swenson
Teaching asynchronous digital design in the undergraduate computer engineering curriculum, S. C. Smith and Waleed K. Al-Assadi
Teaching cold-formed steel design in the 80s, P. K. Basu
Teaching cold-formed steel design to technologists, Richard K. Keplar and Edward R. Estes Jr.
Teaching computer numerical control of manufacturing processes, Anthony Chukwujekwu Okafor
Teaching multi-disciplinary design: solar car design, Douglas R. Carroll and Paul D. Hirtz
Teaching nanotechnology by introducing crossbar-based architecture and quantum-dot cellular automata, Minsu Choi and Nohpill Park
Teaching the superposition method with internet-based instructional software, Timothy A. Philpot, Richard H. Hall, Ralph E. Flori, Vikas Yellamraju, and Nancy Hubing
Team climate factors moderating the effects of gender and functional diversity on individual and team innovation, Jamie Dee Schroetlin
Tears-of-wine and related phenomena, Partho Neogi
Technical analysis of corn products, Roy Hayward DeWaters
Technical and computational aspects of the measurement of aggregate shape by digital image analysis, Norbert H. Maerz
Technical and technological considerations in the carving of granite prisms by high pressure waterjets, David A. Summers and Marian Mazurkiewicz
Technical feasibility of applying low cost automated mapping system to small towns, Mohd Fauzi Ismail
Technical feasibility of generating electric power from oat hull gasification, V. J. Flanigan, Luis Cruz Baja, and M. S. Dunham
Technical methods of analysis for mill products, Daniel Elijah Huffman
Technical target setting based on impact analysis in software quality function deployment, Xiaoqing Frank Liu, Kunio Noguchi, Anuj Dhungana, V. V. N. S. N. Srirangman A., and Praveen Inuganti
Technical target setting in QFD for web service systems using an artificial neural network, Lianzhang Zhu and Xiaoqing Frank Liu
Technical target setting in time-stamped quality function deployment, Xiaoqing Frank Liu, Praveen Inuganti, and Kunio Nogichi
Technique for evaluating nozzle clogging of refractories during continuous casting, Robert B. Tuttle, Kent D. Peaslee, and Jeffrey D. Smith
Technique for evaluating refractory corrosion in thermal gradient, Rina Sane
Techniques for failure avoidance in early stages of design, Brian A. Mitchell
Techniques to reduce soil compaction in reclaimed soils: Final report, Lee W. Saperstein
Techno-economic and life-cycle modeling and analysis of various energy storage technologies coupled with a solar photovoltaic array, Brian Andrew Peterson
Technologies for decreasing the tap temperature to save energy in steel foundries, Siddhartha Biswas
Technology alliances of organizations: a resonance theory perspective, Feng-Wei Lai
Technology assessment of university research centers, Nishaj Attassery
Technology-driven change management: motivation and stakeholder acceptance in virtual supply chains, Suzanna Long
Technology for the future: report of the SME research forum, Lee W. Saperstein
Technology of iron-carbon alloys production with the use of production wastes, Semen Naumovich Lekakh
Technology valuation: a review and comparison of methods, Satish Kumar Sampath Kumar
Techno-managerial potential of African Americans in workforce 2000, Tamiko Mioshia Youngblood
Tectonic analysis of Mare Humorum on the lunar surface, Adnan Said Abul-Husn
Tectonics of the Afar Depression: a review and synthesis, Mohamed G. Abdel Salam
Teicoplanin-loaded borate bioactive glass implants for treating chronic bone infection in a rabbit tibia osteomyelitis model, Xin Zhang, Wei-Tao Jia, Yifei Gu, Wei Xiao, Xin Liu, Deping Wang, Chang-Qing Zhang, and M. N. Rahaman
Telecommunications system design considerations for advanced logistic spacecraft, James Myron Romberg
Teleseismic anomalies in the mantle beneath continental rifts, P. D. Slack, Stephen S. Gao, H. Liu, and P. M. Davis
Television advertising in the Arab world: a status report, Morris Kalliny, Grace Dagher, Michael S. Minor, and Gilberto do lo Santos
Television image motion estimation, Gopalan Krishnamurthy
Tellurium and selenium in aerosols, Kuen-Yuan Chiou and Oliver Manuel
Tellurium in rocks, Richard D. Beaty and Oliver Manuel
Tellurium thermodynamics in austenitic iron, Gautam Gupta, D. G. C. Robertson, and Mark E. Schlesinger
TEM/HREM observations of nanostructured superplastic Ni₃Al, R. Z. Valiev, C. Song, S. X. McFadden, Rajiv S. Mishra, and A. K. Mukherjee
TEM investigation of hot pressed -10 vol.%SiC-ZrB₂ composite, Y. Wang, Greg Hilmas, P. Brown, D. D. Jayaseelan, William Fahrenholtz, and William E. Lee
Temperature and burnup reactivities and operational lifetime for the submersion-subcritical, safe space (S⁴) reactor, Jeffrey C. King and Mohamed S. El-Genk
Temperature and wavelength dependent transmission of optically transparent glass fibre poly (methyl methacrylate) composites, Hongy Lin, D. E. Day, Kevin D. Weaver, and James O. Stoffer
Temperature consideration in solar arrays, Min-Jung Wu
Temperature considerations in solar arrays, Steve Eugene Watkins, Min-Jung Wu, and E. J. Timpson
Temperature control of a horizonal diffusion chamber., Mohamad Namazi
Temperature corrections for coordinate measuring machines, Amy Lynn Weir
Temperature dependence of density of polymer gels, Tadashi Tokuhiro
Temperature dependence of density of polymer gels, Tadashi Tokuhiro
Temperature dependence of density of polymer gels: effects of ionizable groups in copoly(N-isopropylacrylamide/acrylic acid or sodium acrylate)-water systems, Tadashi Tokuhiro and Akira T. Tokuhiro
Temperature dependence of molecular motion in smectic liquid crystals of hydrated Sodium 4-(1′-Heptylnonyl)benzenesulfonate, Frank D. Blum and Wilmer G. Miller
Temperature dependence of the electron attachment rate in iodine., Howard Lundgren Brooks
Temperature dependence of the formation of an amorphous layer in ion-implanted silicon, Gary Keith Woodward
Temperature dependence of the interaction second virial coefficient using gas-liquid chromatography, Partho Neogi and A. P. Kudchadker
Temperature dependence of the interaction second virial coefficient using gas-liquid chromatography, Partho Neogi and A. P. Kudchadker
Temperature dependence of the Mossbauer spectra of several iron(III) trisdithiocarbamate complexes, J. M. Fiddy, I. Hall, Fernande Grandjean, Gary J. Long, and U. Russo
Temperature dependence of the proton nuclear magnetic resonance spectra of some diamagnetic N,N-dialkyldithiocarbamate complexes of transition metals, Raymund M. Golding, Peter Conrad Healy, Peter Newman, Ekkehard Sinn, and Allen H. White
Temperature-dependence studies of photorefractive effect in a low glass-transition-temperature polymer composite, Bogdan Swedek, Ning Cheng, Yiping Cui, Jaroslaw W. Zieba, Jeffrey G. Winiarz, and Paras N. Prasad
Temperature dependent energies of formation for hydrogen-bonded water clusters using a modified mndo and a statistical mechanics approach, S. H. S. Salk, Chen Kwee Lutrus, T. S. Chen, Donald E. Hagen, and Tadashi Oshiro
Temperature dependent fatigue-failure analysis of V-ribbed serpentine belts, Saikrishna Sundararaman, J. Hu, J. Chen, and K. Chandrashekhara
Temperature-dependent optical absorption properties of monolayer-protected Au 25 and Au 38 clusters, Mary Sajini Devadas, Semere Bairu, Huifeng Qian, Ekkehard Sinn, Rongchao Jin, and Guda Ramakrishna
Temperature dependent ternary solution behavior of aqueous nonionic surfactant systems containing aliphatic ketones, Gregg Alan Barnes
Temperature distribution in an infinite plate as a function of the input heat flux., George Franklin Wright
Temperature distribution in a semi-infinite solid as a function of the input heat flux., Lloyd Carl Laciny
Temperature distribution in different materials due to short pulse laser irradiation, Anil Ogale, Champak Das, Kunal Mitra, Chelakara Subramanian, and Arindam Banerjee
Temperature distribution in thermal boundary layers (in free convection) using a modified Schlieren method, Philip Ling Chen
Temperature effect on shear correction factor, Victor Birman
Temperature fluctuations within a solid of finite thickness, William Sanford Hogan
Temperature, humidity, pressure and/or density effects on velocity measuring instrumentation, Roger George
Temperature-induced restructuring of self-assembled PtPd nanoparticle superlattices, Guoqiang Ren and Yangchuan Xing
Temperature-insensitive miniaturized fiber inline fabry-perot interferometer fabricated by femtosecond laser, Y. Han, C.-H. Lin, Hai-Lung Tsai, T. Wei, and Hai Xiao Dr.
Temperature-insensitive miniaturized fiber inline Fabry-Perot interferometer for highly sensitive refractive index measurement, Tao Wei, Yukun Han, Yanjun Li, Hai-Lung Tsai, and Hai Xiao Dr.
Temperature jump phenomenon during plasmatron testing of ZrB₂-SiC ultrahigh-temperature ceramics, Jochen Marschall, Dušan A. Pejaković, William Fahrenholtz, Greg Hilmas, Francesco Panerai, and Olivier Chazot
Temperature kinetics of nitrogen dioxide-ammonia reactions., George Dillender
Temperature prediction in underground mine airways, R. Karl Zipf
Temperature stabilized transistor direct current amplifier., William Lewis Metcalf
Temperature-tuning of near-infrared (1.5µm) monodisperse quantum dot solids toward controllable Förster energy transfer, Ranojoy Bose, James F. McMillan, Jie Gao, Charlton J. Chen, Dmitri V. Talapin, Christopher B. Murray, Kelly M. M. Rickey, and Chee Wei Wong
Temperature variation in distribution of relaxation times in aluminosilicate glasses, David Wayne Moore
Tempering air with tunnels: full-scale tests and design dimensions, Stewart Gillies, Yusuf Murat Erten, N. B. Aughenbaugh, and C. Dale Elifrits
Templating of plastics for coatings, Ree-Hsueh Wang
Temporal clustering of global seismic moment release over the past 115 years: is Mother Nature out of control?, Stephen S. Gao and Kelly H. Liu
Temporal considerations in the measurement of indoor mass-transfer coefficients, Glenn Morrison and Deborah J. Wiseman
Temporal dynamics of Paleogene paleovegetational response to climatic changes and regional upwelling, West Africa (ODP Site 959), Francisca Oboh-Ikuenobe and Sarah René de la Rue
Temporal modeling of software test coverage, Sahra Sedigh, Raymond A. Paul, and Arif Ghafoor
Temporal variation of seismic b-values beneath northeastern Japan island arc, Stephen S. Gao and A. Cao
Temporal variations of crustal characteristics, Kelly H. Liu, Stephen S. Gao, and S. K. Nair
Temporary protective grounding on distribution circuits., Raymond Edward Mueller
TEM studies of Cu₂O-Si and Cu₂O-InP interfaces made by epitaxial electrodeposition, Fumiyasu Oba, Run Liu, Y. Yu, Eric W. Bohannan, Frank Ernst, and Jay A. Switzer
Tensile and bearing capacities of bolted connections, Jeffrey L. Carril, Roger A. LaBoube, and Wei-wen Yu
Tensile and bearing capacities of bolted steel connections, Jeffrey L. Carril
Tensile characterization of glass FRP bars, S. Kocaoz, Antonio Nanni, and V. A. Samaranayake
Tensile failure during structural development of single-layer buckle folds, Xiaolong Liu
Tensile, high strain rate compression and microstructural evaluation of lightweight age hardenable cast Fe-30Mn-9Al-XSi-0.9c-0.5Mo steel, Ryan A. Howell, T. Weerasooriya, and David C. Van Aken
Tensile strength of BOF refractories determined by the diametral compression method, Vicky Lynn Horstmann
Tensile strength of prereacted porcelain compositions, Chester Lee Hill
Tensile strength of short-fiber reinforced composites with circular cut-outs, Aliollah Keshavarz-Valian
Tensile strength of welded connections, Wei-wen Yu and Roger A. LaBoube
Tension tests on drilled micropiles in a stiff clay 7.20, Alan J. Luteneggar and Gerald A. Miller
Tentative load and resistance factor design criteria for connections, M. K. Ravindra and Theodore V. Galambos
Tentative load and resistance factor design criteria for steel beam-columns, M. K. Ravindra and Theodore V. Galambos
Terahertz data processing for standoff detection of improvised explosive devices, Amit Bipin Shah
Terminal intercept guidance and autopilot for aircraft defense against an attacking missile via 3D sliding mode approach, Takeshi Yamasaki and S. N. Balakrishnan
Terphenyl substituted derivatives of manganese(II): Distorted geometries and resistance to elimination, Chengbao Ni, James C. Fettinger, Gary J. Long, and Philip P. Power
Terrain classification in SAR images using principal components analysis and neural networks, S. Ghaloum, R. Zoughi, and M. R. Azimi-Sadjadi
Terrane rotation during the east African orogeny: evidence from the Bulbul shear zone, south Ethiopia, Mohamed G. Abdel Salam, Lulu Tsige, Tadesse Yihunie, and Bedru Hussien
Terrestrial-type xenon in meteoritic troilite, Golden Hwaung and Oliver Manuel
Terrestrial-type xenon in sulfides of the Allende meteorite, Jauh-Tzuoh Lee, Bin Li, and Oliver Manuel
Tertiary welded tuffs of the Ryan Spring area, Needle Range, Beaver County, Utah., Peter Carlyle Rauch
Test fill to determinate the compression behavior of a closed industrial waste landfill 10.07, Wayne R. Bergstrom and Patrick Dugan
Test fill to determinate the compression behavior of a closed industrial waste landfill 10.07, Wayne R. Bergstrom and Patrick Dugan
Test generation for combinational logic circuits using information theory, Yusuf Murat Erten
Testing and analysis of mechanical assists for medium girder bridge, Tilak Inturi
Testing and evaluation of components for a composite bridge deck, Prakash Kumar, K. Chandrashekhara, and Antonio Nanni
Testing and evaluation of light gauge steel frame / 9.5 mm csp wood panel shear walls, David Rokas
Testing and rock classification of fine grained-earth material., Robert Andrew Sickler
Testing and usage of ventilation control devices within the Australian coal mining industry, Stewart Gillies, R. Day, P. Dux, R. D. Pearson, and A. R. Green
Testing explosives, Frank James Flynn and Miller Edward Willmott
Testing layered interconnection networks, Bin Liu, Fabrizio Lombardi, Nohpill Park, and Minsu Choi
Testing of asynchronous NULL conventional logic (NCL) circuits, Sindhu Kakarla and Waleed K. Al-Assadi
Testing of bolted cold-formed steel connections in bearing (with and without washers), J. A. Wallace, R. M. Schuster, and Roger A. LaBoube
Testing of integrated circuit chips with an IBM PC/XT interface, Narayan Vishwanathan
Testing of Missouri shales for light weight aggregate production, Jerry D. Plunkett
Testing of silicon nitride ceramic bearings for total hip arthroplasty, B. Sonny Bal, Ashok Khandkar, R. Lakshminarayanan, Ian Clarke, Aaron A. Hoffman, and M. N. Rahaman
Testing of steel l-headers on wood walls, NAHB Research Center
Testing of steel roof deck construction, S. Sucharit and Lan-Cheng Pan
Testing of steel roof deck construction, Wei-wen Yu, Lan-Cheng Pan, and S. H. Lin
Testing of steel single L-headers, NAHB Research Center, Inc.
Testing of steel single l-headers, NAHB Research Center
Testing of the Homestake Mine tailings deposit, Donald R. East, William A. Cincilla, and John W. Ransone
Testing of the prototype hydrominer in a surface coal seam, Clark R. Barker, David A. Summers, and Marian Mazurkiewicz
Testing subjective bias in the analysis of the customer needs, Shun Takai and Kosuke Ishii
Test made on the Missouri School of Mines power plant, Leland R. Walker, George Hewitt Boyer, and Alfred Leo Nye
Test methods for mechanically fastened cold-formed steel connections, Committee on Specifications for the Design of Cold-Formed Steel Structural Members
Test of the municipal power plant of the city of Rolla, Missouri, Dexter Eli Andrus, Leonard Stephen Copelin, and Harry Hackett Nowlan
Test of the pluvinage wave function for the helium ground state, S. Jones, Joseph H. Macek, and Don H. Madison
Test procedures for the design of cold-formed steel structural members, connections, and assemblies, K. H. Klippstein
Tests for and against a stochastic ordering between multinomial populations: the general case, Larry Albert Lucas
Tests for gene-treatment interaction in microarray data analysis, Wanrong Yin
Tests of efficiency of the Rolla power plant, Ward Barr Mix, Edwin Bryant Thornhill, George Fred Kellogg, and Clyde Rex Wood
Tests of rock drill bits for Water-Leyner machine, Riley Marsh Simrall and Edmond Otis Stoliker
Tests on cold formed steel studs American Iron and Steel Institute, American Iron and Steel Institute
Tests on cold formed steel studs for the American Iron and Steel Institute, American Iron and Steel Institute
Tests on cold formed steel studs for the American Iron and Steel Institute, American Iron and Steel Institute
Tests on cold formed steel studs for the American Iron and Steel Institute, American Iron and Steel Institute
Tests on field welded puddle and fillet weld connections, R. S. Yarnell and Teoman Peköz
Tests on light beams of cold formed steel, American Iron and Steel Institute
Tests on light beams of cold formed steel for the American Iron and Steel Institute, American Iron and Steel Institute
Tests on light gage steel diaphragms, George Winter and T. V. S. R. Apparao
Tests on puddle and fillet weld connections, A. K. Dhalla and Teoman Peköz
Tests on puddle weld connections, William McGuire, J. W. Struble, and Teoman Peköz
Test track low frequency vibrations reducing measure near Oosthuizen 4.03, Herke G. Stuit
Test verification of the effect of stress gradient on webs of cee and zee sections, Benjamin W. Schafer and Cheng Yu
Tetracarbon metallacarboranes 10, Richard B. Maynard, Ekkehard Sinn, and Russell N. Grimes
Tetracarbon metallacarboranes 11, Richard B. Maynard, Ekkehard Sinn, and Russell N. Grimes
Tetracarbon metallacarboranes 9, Russell N. Grimes, Ekkehard Sinn, and J. Robert Pipal
Tetracarbon metallocarboranes 2, William M. Maxwell, Richard Weiss, Ekkehard Sinn, and Russell N. Grimes
Textbook forum: Heat capacity ratio of a gas by adiabatic expansion, Gary L. Bertrand and Hector O. McDonald
Textural analysis of a rhyolite dike of the southern Oklahoma aulacogen at Medicine Park, Oklahoma, Sean Patrick O'Donnell
Textural properties, provenance, and environments of formation of the "rimrock" sandstone of the filled sinkholes northeast of Rolla, Missouri, Upendra Jayantilal Parikh
Texture analysis of skin cancer images, David Earl Harris
Texture analysis of skin tumor images, Saravanan Ranganathan
Texture and grain alignment in piezoelectric bismuth titanate ceramics, Jaideep Suresh Patwardhan
Texture classification for skin tumor images using the adaptive wavelet packets transform, Yao-Ting Cheng
Texture classification using the wavelet transform, Mary Beth Henke-Reed
Texture measurement of semitranslucent areas in basal cell carcinoma, Shilpa Pendyala
Texturing surfaces to generate artistic models, J. Zhao, Greg Galecki, and David A. Summers
That's Hot!' Teaching Paris to the Paris (Hilton) generation, N. Christine Brookes and Audra L. Merfeld-Langston
The 12-bit RT-100 microprocessor implemented by FPGAs based on the SCC-650 computer system, Hsien-Chang Tseng
The 1,8-bis(2′-pyridyl)-3,6-dithiaoctane complex of nickel(II): X-ray crystal structure and borohydride adduct formation, Vitaly V. Pavlishchuk, Sergey V. Kolotilov, Ekkehard Sinn, Michael J. Prushan, and Anthony W. Addison
The 1920s: American popular culture through history, Kathleen Morgan Drowne and Patrick Huber
The 2008 AISI cold-formed steel design manual, Richard C. Kaehler and Helen Chen
The 7th Infantry Regiment: combat in an age of terror: the Korean War through the present, John C. McManus
The absence of a rheological effect on the spreading of small drops, Robert M. Yazdani and Partho Neogi
The absorption of matte by sodium carbonate, and the effect on the fire-assay, Leo J. Foster and John Thomas Keenan
The acidic transformaion products of indoles formed by basidiomycetes, Chung-Ke Chang
The acquisition of capital funds in the domestic coal mining industry, Dale S. Hursh
The action of nitrogen trioxide on pinene, Ernest Wayne Rembert
The action of tan bark in the manufacture of white lead by the Old Dutch Process, Elmer List
The activity of succinic dehydrogenase and indole acetic acid oxidase in cell-free preparations of Hygrophorous conicus, Jagdish M. Mehta
The acylation of primary and secondary amines by the N-hydroxysuccinmide esters of unsubstituted and substituted styrlacetic acids, Lawrence D. Rutledge
The adhesion of glow-discharge polymers, Silastic and Parylene to implantable platinum electrodes: results of tensile pull tests after exposure to isotonic sodium chloride, Rajender K. Sadhir, William Joseph James, H. Yasuda, Ashok K. Sharma, Michael F. Nichols, and Allen W. Hahn
The adhesion of thin plasma-polymerized organic films to metal substrates, K. Bhasin, D. B. Jones, S. Sinharoy, and William Joseph James
The adsorption of water vapor on super absorbent product at low temperatures and low mass, M. Bakass, J. P. Bellat, A. Mokhlisse, and Gary L. Bertrand
The advanced electric power grid: complexity reduction techniques for reliability modeling, Sahra Sedigh, Bruce M. McMillin, and Ayman Zuhair Faza
The advantage of blue InGaN multiple quantum wells light-emitting diodes with p-AlInN electron blocking layer, T.-P. Lu, S.-T. Li, K. Zhang, C. Liu, G.-W. Xiao, Y.-G. Zhou, S.-W. Zheng, Y.-A. Yin, L.-J. Wu, H.-L. Wang, and Xiaodong Yang
The aerosol and chemical characteristics of rocket exhaust in the stratosphere, Andrew P. Rutter
The age hardening of copper-manganese-nickel alloys, William James Barnett
The Americans at D-Day: the American experience at the Normandy invasion, John C. McManus
The Americans at Normandy: the summer of 1944--the American war from the Normandy beaches to Falaise, John C. McManus
The amino acid and monosaccharide content of the cell walls of Thiobacillus thiooxidans, Edward Hibbert Crum
The aminolysis of the N-hydroxysuccinimide esters of phenylacetic acids, Robert Dean Baker
The analog simulation of heat transfer devices for the smoothing of a fluctuating fluid temperature, Le Thai Son
The analogue of the iterated logarithm for quantum difference equations, Karl Friedrich Ulrich
The analysis and behavior of thin-steel hyperbolic paraboloid shells, Peter Gergely, P. V. Banavalkar, and J. E. Parker
The analysis and behavior of thin-steel hyperbolic paraboloid shells, Peter Gergely, P. V. Banavalkar, and J. E. Parker
The analysis, construction, and calibration of an electronic vibrations amplifier., Jimmie D. Howard
The analysis of a microcomputer controlled power distribution communication system., Bruce Warren Bergman
The analysis of an axially symmetric submerged membrane shell, Walter Earl Wehmeyer
The analysis of a phase-locked loop by the functional expansion method, Hugh Francis Spence
The analysis of locations and markets for the small retail businessman., James Edward Grelle
The analysis of primary atomization in supersonic coaxial systems, Chung-Yu Wei
The analysis of R-S-S-R spatial four-bar mechanism, David Perng Chyi
The analysis of sandwich panels with profiled faces, Michael J. Davies
The analysis of stresses and design of multiple-arch dam, Guy Robert Scott
The anodic behavior of zinc in aqueous salt solutions, Yun-chung Sun
The anodic dissolution and disintegration of gallium and aluminum and the initial valency of the ions entering aqueous solutions., Kenneth Anderson Poush
The anodic dissolution of beryllium in non-aqueous solutions, James W. Johnson, Sho-Chy Chen, J. S. Chang, and William Joseph James
The anodic dissolution of beryllium in nonaqueous solutions., Sho-Chy Chen
The anodic dissolution of cadmium in aqueous solution., Yun-chung Sun
The anodic dissolution of cadmium in aqueous solutions, San-cheng Lai
The anodic dissolution of cadmium in nitrate solution, Eh Deng
The anodic dissolution of deformed Mg in H₂SO₄, William Joseph James, Martin E. Straumanis, and William J. Daniels
The anodic dissolution of magnesium in aqueous solutions, Chen-I Lu
The anodic dissolution of molybdenum in acidic nitrate solutions, Kuan-hsiung Hoh
The anodic dissolution of molybdenum in acid sulfate solutions, Ching-Kuo Chen
The anodic dissolution of molybdenum in alkaline solutions, Chen Hwei Chi
The anodic dissolution of Pb in aqueoussolutions, James W. Johnson, Christopher Kuo-chieh Wu, and William Joseph James
The anodic dissolution of polycrystalline Be, K. G. Sheth, James W. Johnson, and William Joseph James
The anodic dissolution of thallium in H₂SO₄K₂SO₄ and HclO₄NaClO₄ solution, William Joseph James, Pedro Juan Aragon, and James W. Johnson
The anodic dissolution of tin in acidic chloride solutions, Edward Chung-Hong Liu
The anodic dissolution of tungsten, Ching-lun Wu
The anodic dissolution of zinc in aqueous solutions., Glenn E. Stoner
The anodic dissolution of zinc in nitrate solution., Jo Lisle Reed
The anodic dissolution of zinc in potassium chloride-potassium chlorate solutions, Kuei Chun Chen
The anodic oxidation of crotonic acid in basic solutions, Richard C. Porter
The anodic oxidation of ethylene on heterogeneous AuPt alloys, James W. Johnson, San-Cheng Lai, and William Joseph James
The anodic oxidation of maleic acid, Larry D. Gilmartin
The anodic oxidation of oxalic acid on Au, Steven C. Mueller
The anodic oxidation of oxalic acid on Au, Jean Louis Lucien Desmartin
The antecedents of M-commerce adoption, Morris Kalliny and Michael S. Minor
The anticancer activity and the mechanism study of 1,2 naphthoquinone thiosemicarbazone and its metal derivatives against MCF-7 human breast cancer cells, Junnan Chen, Yue-wern Huang, Guanshu Liu, Zahra Afrasiabi Navan, Ekkehard Sinn, and Yinfa Ma
The antinociceptive action of etorphine in the dorsal horn is due to a direct spinal action and not to activation of descending inhibition, Stephen L. Clark and R. W. Ryall
The applicability of longwall mining to American coal seams, Mehmet Turgut Tezcanli
The application and utilization of mining models for instruction and display., William M. Shepard
The application of a microcomputer to the manufacture of specialized fasteners : geometry specification, Scott Daniel Davis
The application of a submerged lance injection technique to the direct smelting of a Missouri lead concentrate, Rachid Ben Slimane
The application of cathodoluminescence microscopy to the study of sparry dolomite from the Viburnum Trend, Southeast Missouri, Robert Louis Voss
The application of computers to study the effects of jetting during steelmaking, Kent D. Peaslee and D. G. C. Robertson
The application of finite element methods to the analysis of acoustic propagation in steady flows with harmonic heat sources, Carlos Arturo Gutierrez
The application of fluid level measurements to oil wells in Kansas, Charles Calvert Rodd
The application of genetic algorithms to identify the worst credible states in a bulk power system, Prasert Paenyoorat
The application of global homotopy continuation methods to chemical process flowsheeting problems, Soo Hyoung Choi
The application of Hert'z contact theory to the problem of an offshore structure entering the seabed, Victor Birman and Robert G. Latorre
The application of impact dampers to continuous systems, Ranjit Kumar Roy
The application of Markov State probabilities in developing artifically intelligent managerial strategies: a case study based on major league baseball, Arnold Vincent Arconati
The application of mean-square error and signal-to-noise ratio estimation to nonlinear communication systems, Krid Dusitsin
The application of neural networks in robotic deburring, Weiqi Luo
The application of preaeration of sewage to the design and operation of waste stabilization lagoons., Richard G. Huber
The application of psychological scaling methods to industrial cost estimating., Robert Allen Costello
The application of quantum-mechanical concepts to biological systems., Andrew A. Cochran
The application of reliability engineering concepts to software development, Wilson Davis Yates
The application of the membrane analogy to the solution of heat conduction problems, Lloyd Hines Wilson
The application of the relaxation method to the solution of problems involving the flow of fluids through porous media, Alexander Antoine Zwierzchowski
The application of the relaxation method to the solution of problems involving the flow of gases through porous media, Ralph Davis
The application of the relaxation method to the solution of steady-state heat transfer through a concentric square insulator, William Edward Simpkin
The application of the VHSIC hardware description language to the test of VLSI circuits, Leon Edward Brumfield
The application of transient aerodynamics to the structural nonlinear flutter problem, Lawrence Otto Brase
The application of weighted density distribution functions to landmine detection using hand-held units, Satish Somanchi
The artificial sedimentation of soil, John Richard Wagner
The art of parameterless evolutionary algorithms, Ekaterina A. Holdener
The assessment of winding forces due to inrush current in large transformers with heavily saturated cores, Richard Howard Palmer
The assignment problem and a suboptimal solution technique, William Barry Gregory
The asymptotic properties of the sample autocorrelations for a multiple autoregressive process with one unit root, V. A. Samaranayake and David P. Hasza
The atomic absorption determination of ultra-trace tellurium in rocks utilizing high sensitivity sampling systems, Richard D. Beaty
The atomic and magnetic structure of NdMn(₆₋ₓ)FeₓGe₆ solid solutions, J. Han, G. K. Marasinghe, William Joseph James, Muguo Chen, William B. Yelon, I. Dubenko, and Naushad Ali
The atomic structure of BiFeO₃, Christian Michel, Jean-Michel Moreau, Gary D. Achenbach, Robert Gerson, and William Joseph James
The availability and development of an automated accounting system for small businesses., Margy Rice Beckmeyer
The average dissipation curve of an attenuative layered earth medium, Joong Hee Chun
The Axiom of Choice, well-ordering property, Continuum Hypothesis, and other meta-mathematical considerations, Daniel Collins
The background concentrations of copper, lead, and zinc in streams of the "New Lead Belt", Missouri, Nicholas Howard Tibbs
The barite industry in the United States, James Byron Chaney
The barium titanate-lanthanum titanate system, James Milton Stubbs Jr.
The B-Cd (Boron-Cadmium) system, P. K. Liao, Karl E. Spear, and Mark E. Schlesinger
The B-Ce (Boron-Cerium) system, P. K. Liao, Karl E. Spear, and Mark E. Schlesinger
The behavior of compression web members in cold-formed steel truss assemblies, Jerome A. Riemann
The behavior of house on seasonality frozen ground, Xu You Zai and Wang Zheng Qiu
The behavior of slags in rising bubbles in liquid metals, using the "Open Top Bubble" technique, D. G. C. Robertson, A. C. Ebiogwu, and D. S. Conochie
The behavior of the metallic stearates in chromatography, Theodore Jack Roemer
The behaviour in time of Ripa Albastra Dam impervious bentonitic core, Aurel I. Harsulesca
The behaviour of the third phase produced in gas bubble--liquid reactions, D. S. Conochie and D. G. C. Robertson
The behaviour of thin-walled I-section columns after local buckling, J. Loughlan and M. Nabavian
The behaviour of two trial embankments at perlis, Malaysia with different rates of construction 2.22, A. McGown and A.N. Hussein
The behaviour of two trial embankments at perlis, Malaysia with different rates of construction 2.22, A. McGown and A.N. Hussein
The benefit of dividing an indirect thermal storage into two compartments: discharge experiments, Vishard Ragoonanan, Kelly Homan, Susan C. Mantell, and J. H. Davidson
The B-Er (Boron-Erbium) system, P. K. Liao, Karl E. Spear, and Mark E. Schlesinger
The best in mine safety training, R. Larry Grayson
The best test preparation for the CLEP: introductory psychology, Don Sharpsteen
The B-Eu (Boron-Europium) system, P. K. Liao, Karl E. Spear, and Mark E. Schlesinger
The Beverton-Holt dynamic equation, Howard Warth and Martin Bohner
The B-Gd (Boron-Gadolinium) system, P. K. Liao, Karl E. Spear, and Mark E. Schlesinger
The biocatalysis of ß-Galactosidase in reverse micelles or water-in-oil microemulsions, Chish-Cheng Will Chen
The biocatalysis of α-chymotrypsin in reverse micelles, Frederick Anthony Daly
The biological conversion of corn residue into ethyl alcohol using an immobilized-cell reactor, Oliver C. Sitton
The B-La (Boron-Lanthanum) system, Mark E. Schlesinger, P. K. Liao, and Karl E. Spear
The Black-Scholes equation in quantum calculus, Christian Müttel
The bloating of clays, Everett Walter Sharp
The bloating of Missouri's shales, Peter Kurtz Jr.
The blood-brain barrier in NeuroAIDS, Nuran Ercal, T. Otamis-Price, and William A. Banks
The B-Nd (Boron-Neodymium) system, P. K. Liao, Karl E. Spear, and Mark E. Schlesinger
The boron trifluoride nitromethane adduct, P. D. Ownby
The boron trifluoride / nitromethane ratio of the BF₃ -CH₃ NO₂ adduct, P. D. Ownby, Benjamin T. Eldred, and W. E. Saunders
The boundary condition at an impedance wall in a non-uniform duct with potential mean flow, Walter Eversman
The boycotting of Coach Rutter: Manhood, race and authority in the post-1970 Mississippi, Trent Watts
The B-Pd (Boron-Palladium) system, P. K. Liao, Karl E. Spear, and Mark E. Schlesinger
The brain state in a convex body neural model, Martin Bohner
The Brenda mines' cycloned- sand tailings dam, Earle J. Klohn
The bromine and iodine content of certain saline ground waters of Missouri., Erwin Carl Frederick Meckfessel
The B-Sm (Boron-Samarium) system, P. K. Liao, Karl E. Spear, and Mark E. Schlesinger
The calculation of saturated values of synchronous machine model reactances from design data., Joaquin Cruz Flores
The Campaign Against Smoking Opium, Diana L. Ahmad
The Canadian LRFD standard for cold formed steel design, R. M. Schuster, D. L. Tarlton, and S. R. Fox
The Canadian mining education council: An initiative to network Canada's mining schools, M. Scoble, J. Archibald, R. Corthesy, F. P. Hassani, R. Stevens, J. Hadgigeorgiou, W. Bawden, S. P. Singh, Samuel Frimpong, and S. D. Butt
The carbonatite-hosted apatite deposit of Jacupiranga, SE Brazil: styles of mineralization, ore characterization and association with mineral processing, Paula Regina Alves
The cascade arc as a plasma source for plasma polymerization, Steven Paul Fusselman
The case record of Ba-Yu-Quan anchor slab retaining wall, Z. S. Zhang, X. X. Zhang, and D. Z. Luan
The catalytic action of neutral salts : the effect of normal alkali sulphates on alkali acid sulphates in the ketonic splitting of ethyl acetoacetate, Elbridge Alvah Goodhue
The catalytic vapor-phase hydrolysis of benzene and toluene, Clemens Raebel Maise
The cathodic reduction of bromate ions on mercury in neutral and basic solutions, Jaw-Shin Chang
The cathodic reduction of maleic acid, Show Yih Hsieh
The causes of armature surface fracturing within helical flux-compression generators, Paul Nicholas Worsey and Jason Baird
The cementing of hydraulically placed tailing fill by the oxidation products of pyrrhotite, Stanley H. Alder
The Cenomanian/Turonianoceanic anoxic event in the Razzak Field, north Western Desert, Egypt: source rock potential and paleoenvironmental association, Mohamed K. Zobaa, Francisca Oboh-Ikuenobe, and Mohamed I. Ibrahim
The center for dielectric studies (CDS): a national science foundation industry/university cooperative research center, Fatih Dogan, C. A. Randall, M. Lanagan, A. Schwarzkopf, and Harlan U. Anderson
The center-of-inertia transform, with application to electric power systems, David Raymond Waggoner
The challenge of measuring airflow through mine regulators to allow real time ventilation monitoring, Stewart Gillies, A. Halim, Timothy I. Mayes, and Hsin Wei Wu
The change in the order of catalytic action of lithium chloride, sodium chloride, magnesium chloride, and calcium chloride in the ketonic splitting of ethyl acetoacetate, Richard Dwight Duff
The characteristics and performance of a high radiance planar light emitting diode, Salar Navidi
The characteristics of radial strain propagation induced by explosive impact in Jefferson City dolomite., Choon K. Quan
The characterization of volatiles associated with young stellar objects, Kari Anne Wojtkowski
The chemical and electrochemical oxidative decarboxylation of methyliminodiacetic acid in acid media, Rita Kathleen Hessley
The chemical engineering aspects of the Saint Louis smoke problem, George Augustus Hale
The chemical oxidation of alkyl benzene sulfonates with potassium permanganate., Rameshchandra M. Patel
The chemistry of flow control, Harvest L. Collier
The chemistry of fuming zinc from oxide slags using coke, D. G. C. Robertson, Dhiren Panda, and Adrian C. Deneys
The chitin synthetase enzyme of Schizophyllum commune "wild-type" and the mutant "streak", Gary Clifford Magruder
The chloride volatilization of silver and lead from zinc concentrate, Edward Phillip Barrett
The Clark National Forest of Missouri, Walter A. Werner
The closed cycle-external combustion engine and air pollution, Galen Lee Pearson
The closure of thin wall pressure vessels, Archie W. Culp Jr.
The cloud phase extraction process for the recovery of sparingly-soluble organic compounds from waste aqueous streams, Stephen Christian Chadwick
The Coarse Crushing Plant of the Desloge Consolidated Lead Company, Horace Reynolds Stahl and Robert Gibson O'Meara
The combination of ascorbic acid 6-Palmitate and [Fe₃III(u₃-O)]⁷+ as a catalyst for the oxidation of unsaturated lipids, Fabrizio MiccichÃ, Gary J. Long, Ahmed M. Shahin, Fernande Grandjean, Weihua Ming, Jacco van Haveren, and Robert van der Linde
The combined effects of postdetection filtering and continuous wave interference on the performance of binary noncoherent frequency-shift keyed receivers., Charles N. Nchako
The combustion of phosphorus, Erwin Charles Hoeman
The commercial preparation of baryta, Ray Fleming Rucker and Damon Duffield Dunkin
The commercial value of high iron and high alkalie diaspore, William Lucius McCracken
The completion, adjustment, and operation of a grazing incidence vacuum ultraviolet spectrograph., William Clinton Johnson Chamberlain
The completions of local rings and their modules., Christopher Scott Taber
The compositional and temperature dependence of radiation-induced void nucleation and swelling in austenitic alloys, Bahram Esmailzadeh
The composition and analysis of zinc-lead pigment, Evans Walker Buskett
The composition of organo-tin polymer films on metallic substrate materials, Erich Kny, L. L. Levenson, William Joseph James, and Robert A. Auerbach
The compressibility of preconsolidated till, William H. Koechlein
The compressive behavior of isocyanate-crosslinked silica aerogel at high strain rates, H. Luo, Hongbing Lu, and Nicholas Leventis
The compressive behavior of isocyanate crosslinked silica aerogels at high strain rates, H. Luo, Hongbing Lu, and Nicholas Leventis
The computation of the kinetics of reactions between multiple phases, D. G. C. Robertson
The computer-aided generation of flow-tables for asynchronous sequential circuits, Ronald Lee Altman
The computer plotting of root loci on multiple planes., Ying-Wung Lee
The concentration of a pyrolusite ore, Frank O. Blake and Van Hoose Smith
The concept and design of a curvilinear character generator for cathode ray tube display systems, Lawrence Edward Hanebrink Jr.
The concept of social determinism as a motivating influence in some modern tragedy, Arthur Lenox Bradford
The condensation of oil-refrigerant mixtures on single horizontal smooth and finned tubing., Paul E. Williams
The conducting sheet analogy for Laplace and Poisson equations., Ronald Edward Volker
The conformational requirements for binding of ketanserin analogues to the serotonin (5HT₂) receptor: a molecular modeling approach, Scott A. DePriest
The conjugate of a singular functional differential operator, Leon M. Hall
The conormal type function for CR manifolds, Roman Dwilewicz and C. Denson Hill
The constant impedance tapered lossless transmission line, Yu Kuo Chen
The constitution of magnesium-rich magnesium-zirconium alloys., Kenneth Allen Fowler
The construction and analysis of an amplifier for ultrasonic research., Jerry John Koelling
The construction and evaluation of a small scale laboratory fermentor for batch and continuous studies., Robert Murray Logan
The construction, equipment and operation of the second largest oil refinery in Mexico, Arturo C. Fernandez
The construction of a Fermi neutron chopper for cross section measurements, Cleon Marion Mobley
The construction of a multi-threshold foil for fast flux measurements, Michael Henry Holkenbrink
The construction of a single crystal neutron diffraction unit and measurement of effective neutron temperature, Larry Dean Thompson
The construction of cofferdams Dam No. 26, Alton, Illinois, Arthur James Williams
The construction of the United States Macadam Road at Fort Scott, Kansas, William McElroy
The contribution of phonon-induced tunneling to donor ESR spectral narrowing in semiconductors, David Lawrence Meier
The control of anode corrosion, Edward Arthur Godat
The control of noise in urban areas., Edwin Eugene Frye Jr.
The convergence of the bilinear and linear immersed finite element solutions to interface problems, Xiaoming He, Tao Lin, and Yanping Lin
The convolution on time scales, Gusein Sh. Guseinov and Martin Bohner
The copper deposits of Shannon County, Missouri, John Hyer Bowles and Lewis Ely Davidson
The correlation of Kelly Ball penetration readings with standard slump cone readings for concrete made from Missouri aggregates, James Claude Rives
The correlation of proton and neutron damage in photovoltaics, J. Lorentzen, Susan L. Murray, S. R. Messenger, E. A. Burke, R. J. Walters, J. H. Warner, G. P. Summers, C. S. Murray, C. J. Crowley, and N. A. Elkouh
The corrosion of Ni₃Si alloys in sulfuric acid, Christopher Marc Larson
The Co-Si (Cobalt-Silicon) system, K. Ishida, T. Nishizawa, and Mark E. Schlesinger
The cost of a structure which is to take the place of the Beaver Bridge, Rudolph C. Hoyer
The cost of producing electricity at the Hamilton, Missouri Light and Power Company, Bernerd William Adams
The coupled transverse vibrations of a spinning membrane disk with a central hub, Walter Eversman and G. B. Cloyd
The coupling of the electrostatic potential with the transport and adsorption mechanisms in ion-exchange chromatography systems: theory and experiments, Brian A. Grimes and Athanasios I. Liapis
The creation of additional space for the storage of dredged materials - a case history, Nicholas Chryssafopoulos
The creation of surface metal matrix composites through friction stir processing, Jeffrey Gerard Thomas
The Cretaceous-Paleogene transition in the northern Mississippi Embayment, S.E. Missouri: palynology, micropaleontology, and evidence of a mega-tsunami deposit, Tambra L. Eifert
The CRL186 single board computer design, Chentung Hu
The CRL960 system based on Intel 80960KB microprocessor, Ivan Shyue-Cherng Doong
The crystal and molecular structure of [Co(NH₃)₅PO₄]⁻3H₂O, a Na⁺-K⁺ ATPase probe, Greg A. Brewer, Stephen Drucker, Jaymee P. Girard, Charles M. Grisham, and Ekkehard Sinn
The crystal structure and magnetic properties of the synthetic langbeinite KbaFe₂(PO₄)₃, Peter D. Battle, A. K. Cheetham, W. T. A. Harrison, and Gary J. Long
The Cyanidation of High Grade Gold and Silver Concentrate, Reginald Henry Brinton Butler and John Warren Beard
The cyanide process for gold, John C. Reid
The cyaniding of a Mexican silver ore, Homer Marvon Wilson and Roy Watson Griffin
The cytotoxicity and mechanisms of 1,2 naphthoquinone thiosemicarbazone and Its metal derivatives against MCF-7 human breast cancer cells, Junnan Chen, Yue-wern Huang, Guanshu Liu, Zahra Afrasiabi Navan, Ekkehard Sinn, Subhash B. Padhye, and Yinfa Ma
The damage assessment of thermally shocked high density, high purity aluminum oxide, John H. Ainsworth
The dc electrical conductivity of iron phosphate glasses, B. Šantić, Andrea Moguš-Milanković, and D. E. Day
The DC one-dimensional numerical analysis of solar cells., Akira Ito
The decomposition of 5-hydroxymethyl-2-furaldehyde under gamma irradiation, William George Bowles
The decomposition of YBa₂Cu₃O₇₋δ doped into Ba₂YRuO₆, H. A. Blackstead, William B. Yelon, M. Kornecki, M. P. Smylie, P. J. McGinn, Jinbo Yang, Qingsheng Cai, and William Joseph James
The defect structure and bonding of zirconium nitride containing excess nitrogen, Martin E. Straumanis, Chester A. Faunce, and William Joseph James
The defect structure of acceptor doped and undoped Cr₂0₃, Rong-Fong Huang
The deformation mechanisms in sublimed magnesium under cycle loading, Babu Narian Thakur
The delayed failure of a large cutting in Hong Kong, R.R. Hudson and S.R. Hencher
The density of horizontal control in Missouri, Norman Lee Brown
The depolarization of Pb(Zr0.52Ti0.48)O₃ ferroelectrics by cylindrical radially expanding shock waves and its utilization for miniature pulsed power, S. I. Shkuratov, Jason Baird, and E. F. Talantsev
The depositional interpretation of the subsurface Upper Cambrian Bonneterre Formation in south central Missouri, Michael Thomas Moylett
The deposition of ultrafine carbon aerosol in tubes with unsteady flow., Glendon M. Frick
The depression of quartz in sulphide flotation., William McMinn Billinghurst
The description and origin of beds of secondary quartz in the Mississippian St. Louis limestone of eastern Missouri., Bruce William Netzler
The description of an effective sinkhole investigation approach: a case study of two sites in Greene County, Missouri, Stanley Chinedu Nwokebuihe
The design, analysis, and implementation of a genetic-based scheduler for multicriteria scheduling on identical parallel machines, Krittikamas Nananukul
The design and analysis of a metalcutting coolant/lubricant application system for delivery of a soy based cutting fluid, Richard Neal Callahan
The design and analysis of a three dimensional CAM, Steven P. Trower
The design and analysis of cellular manufacturing systems using computer simulation, Kevin Martin Hubbard
The design and calibration of a vibrating sample magnetometer, Donald Dwight Hoffman
The design and characterization of a high flux beam source of fast neutral helium., David William Fahey
The design and construction of a medium power, synchronous, electronic switch, Floyd S. Hall
The design and construction of an apparatus for the plane wave analysis of mufflers, Stephen Philip Buckley
The design and construction of an electronic D-C analog computer., Frederick R. Wagner
The design and construction of an inertia welder, Arthur Ferdinand Grimm
The design and construction of an instrument for calibrating accelerometers, Richard Rabenau
The design and construction of a shock tube facility, William Adolph Crede
The design and development of a computer-controlled digital storage oscilloscope, James M. O'Connor
The design and development of a human interface for an intelligent terminal for a process control industry, V. Rangarajan
The design and development of a lexical generator system, Yu-Wen Wan
The design and development of an intelligent terminal for a process control industry., S. Ramamurthy
The design and equipment of a model coal mine for the Union Pacific Coal Company, Superior, Wyoming, William Thomas Sharp
The design and experimental investigation of a hybrid phase-lock loop, Srinivasa H. R. Raghavan
The design and implementation of a small endothermic generator for laboratory use, Donald Scott MacKenzie
The design and implementation of a work scheduling system for the mine management, U. Varanasi, H. Singh, and R. Larry Grayson
The design and implementation of graphic support for the mine management support system, V. Varada, H. Singh, and R. Larry Grayson
The design and implementation of the programming language natural, Alan Lyle Sparks
The design and installation of an apparatus for dehydrating the air which is used in the blast furnaces of the Hanyang Iron and Steel Works and other suggested improvements, Hanyang, Hupei, China, Andrew Jackson Seltzer
The design and signal integrity analysis of a digital signal processing system, Shawn William Thompson
The design and the development of a graphical user interface based evaluation tool for a fault tolerant digital system, Ravi Kiran Paladugu
The design, construction, and calibration of a hydrodynamic journal bearing testing machine., John H. Roberts
The design, construction, and calibration of an angular accelerameter., Walter Earl Palm
The design, construction, and calibration of an apparatus to determine the thermal conductivity of solids., Alan Edward Stephenson
The design, construction, and evaluation of a vortex stabilized plasma generator., Ronald Ray Williams
The design, construction and experimental verification of a split hopkinson bar, Woosoon Bai
The design, construction, and operation of a conducting field analog computer., Richard T. Johnson
The design, construction, and testing of a heat exchanger for determining heat transfer coefficients for liquids in forced convection normal to banks of staggered tubes, Kenneth Edwin Rudert
The design, development and manufacture of cortical bone fasteners for use in orthopedic surgery, Ronald Paul Holland
The design of a closed-loop voltage regulator for a D-C generator, Ernest P. Longerich
The design of a controller for the intelledex model 605T robot, Dennis Todd Mell
The design of a dam and the investigation of a water supply for the city of Rolla, Missouri, Frank Xavier Nachtman and Ernst Lorenze Chamberlain
The design of a data set interface, Wayne Everett Omohundro
The design of a direct current generator field controller, Melvyn Elwin Downs
The design of adjustable storage shelves, J. Rhodes, William King, and James M. Harvey
The design of a drum memory system, Frederick W. Lynch
The design of a high field magnetometer using ferromagnetic resonance in small YIG spheres., Marcus Da Silva
The design of a high temperature thermoelectric generator element using silicon carbide, John Talmage Barrow Jr.
The design of a hybrid computer system, James Joseph Becker
The design of a hydraulic jet coal cutting head., Rodney Steven Eck
The design of a lightning data interface, Larry Lee Hosto
The design of a lumped element impedance-matching network with reduced parasitic effects obtained fiom numerical modeling, Shaofeng Luan, Jun Fan, James L. Knighten, and Norman W. Smith
The design of a microprocessor controlled logic analyzer., Dixi Field Smith
The design of a mill to treat a certain gold-silver ore by cyanidation, Emilio Diaz and Robert William Mackey
The design of a molten fueled, vortex reactor, for use as a rocket propulsion device, Robert Philip Schmitt
The design of an apparatus for the study of fast and slow chemical reactions involving gases and a kinetic investigation of the catalytic decomposition of silver oxide, Hilbert Walter Crocker
The design of an Intel 80386SX cross assembler and system software, Chang-Min Chou
The design of an interface between a Nova minicomputer and a TTL breadboard., Jeffrey Leonard Susanj
The design of a process and plant for the manufacture of alum from clay, Clarence Woods
The design of a reinforced concrete arch highway bridge, Clinton DeWitt Smith
The design of a sampling mill to treat a south east Missouri lead ore, Robert Nathaniel Copeland and Edwin Cook McFadden
The design of a sensitive probe for mass flux measurements of water vapor in air, Devendra Vaikunthlal Mehta
The design of a tape deck controller, Frederick Harold Keeve
The design of a water jet drill for development of geothermal resources. Progress report, August, 1, 1976-October 1, 1976, David A. Summers and T. F. Lehnhoff
The design of a water supply distributing system for the City of St. James, Missouri, Arch W. Naylor and John Hurtgen
The design of a water supply system for the Missouri School of Mines, Lewis Alfred Delano and John Turner Rice
The design of graphical user interfaces in the UNIX environment, Mahesh Govind Joshi
The design of Main Street reinforced concrete arch over Frisco R. R., Hyman Zirulick
The design of silicon-based polyimide as a submicron resolution directly imagable electron-beam resist, Benjamin Chung-Peng Ho
The design of three-port strip line circulator, Jeng Seng Chang
The desorption of furfural from activated carbon, Chi Min Shu
The destructive distillation of pine sawdust, Frederick Hauenstein and Herbert Arno Roesler
The detection of unsteady flow separation with bioinspired hair-cell sensors, Benjamin T. Dickinson, John R. Singler, and Belinda A. Batten
The determination of adsorption isotherms for various components of acid hydrolyzates using activated carbon, Jing-Jong Your
The determination of aldehydes and ketones in diesel exhaust from the combustion of various types of diesel fuels using high pressure liquid chromatography., George Edward Creech
The determination of aluminium, Victor Hugo Gottschalk
The determination of friction-coefficients of water in small iron pipes, Oliver Wendell Holmes and Ernest Wander
The determination of oils in limestone, Claude Calvin Cushwa
The determination of rare earth elements in carbonado diamonds using neutron activation., Kathleen Marie Garst
The determination of selenium and tellurium in lead alloys by graphite furnace and hydride generation atomic absorption spectrometry, Gregory James. Fox
The determination of the alumina content in diaspore and high alumina clays, W. D. Keller
The determination of the best treatment for a certain Mexican silver ore, Sumner Cooley Macomber
The determination of the critical sizes in table concentration, Julius C. Miller and John N. Webster
The determination of the electrical resistance of the human body under conditions to be met within underground mining, Duncan S. Smith and Paul E. Coaske
The determination of the fusing point of a few igneous and metamorphic rocks, Fred H. Perkins
The determination of the heat transfer film coefficients of internally heated and twisted strips., Karpurapu Venkata Apparao
The determination of the settling velocity of certain minerals common in ore-dressing, Oscar N. Bribach and Robert Winters Johnson
The determination of the solubility of glucose in aqueous ethyl alcohol and the single-solute equilibrium adsorption of glucose onto activated carbon in aqueous ethyl alcohol, Christopher P. O'Callaghan
The determination of the solubility of hafnium oxide in aqueous solution by the radioactive tracer technique, Hampden O. Banks
The determination of the surface tension of benzyl ether, Sze-Kwei Min
The development and analysis of a system to measure transient angular velocity, David Lawrence Persson
The development and analysis of professional ethics for computer simulation, Lawrence Vincent Edmondson
The development and application of a systematic approach to evaluating an academic department's brand meaning, Cassie Elrod
The development and application of the complete time-domain TRL calibration technique, Hongxia Ning
The development and characterization of an optically transparent glass ribbon reinforced polyester composite, Jason Edward Carter
The development and evaluation of an experimental technique to determine stress distribution in uniformly loaded flat plates, James William Walker
The development and evaluation of a re-enterable LU decomposition algorithm, Martin John Armstrong
The development and evaluation of a sparse matrix algorithm for an equation oriented chemical process flowsheeting system, Shih-Wei Hsu
The development and implementation of knowledge worker performance measurement systems in a service industry environment, Gregory Allen Sedrick
The Development and implementation of on-line statistical process control software for a continuous process, Chung-Cheng August Tsai
The development of a closed-form expression for the input impedance of power-return plane structures, Minjia Xu and Todd H. Hubing
The development of a coal material flow analysis, indicators, and models to facilitate the creation of public policy, Joel R. Warneke
The development of a computerized maintenance program for a physical plant facility., Robert Leroy Otto
The development of a copper-silver ore body, Colwell Arba Pierce
The development of a device to replace the oil well dynamometer., Jerry Bernard Overton
The development of a feature-based fixture process planning system for flexible assembly, Frank W. Liou and Dong-Jung Suen
The development of a ferromagnetic resonance magnetometer for observation of minute high frequency fluctuations on large average fields, Robert Howard Booker
The development of a functionality-centric approach to software early risk assessment, Jayson P. Vucovich
The development of a general equilibrium model to determine the prices for lead and zinc, Karl E. Burgher
The development of a lead, zinc prospect, Felix Anthony Lyneman
The development of a mathematical model describing the hydrogen peroxide catalyzed UV photolysis of nitroglycerin in process water generated by the waterjet cutting of Class 1.1 propellant, Eric Lane Schneider
The development of a microcomputer CAD/CAM and decision support system for the manufacture of aerospace vehicles, Craig Thomas Scott
The development of a modified soil shear vane, Vernelle Truman Smith
The development of a new process for the manufacture of insulating refractories, Miles E. Tyrrell
The development of a new stereotactic whole body frame for extra-cranial radiotherapy, J. B. Chung, T. S. Suh, B. Y. Choe, Hyoung-Koo Lee, and W. K. Chung
The development of an interactive load flow system for economical implementation on existing computer systems., Dennis Wayne Leitterman
The development of a personal response heat stress meter calibrated to the physiology of the range of employees within the mine workplace, Hsin Wei Wu and Stewart Gillies
The development of a process for the treatment of a complex ore, Charles Adrian Burdick
The development of a real time airflow monitoring and control system, Stewart Gillies, Timothy I. Mayes, Hsin Wei Wu, Mehmet S. Kizil, and Nan Wang
The development of a real-time digital flight simulator on the Apollo DN10000VS, Michael Kevin Sinnett
The development of a selection model for coal conversion processes., Karen Aldridge Dollar
The development of a streamtube steamflooding simulation model, Kurt Devlin Koehler
The development of conical stress forms by explosive charges, Walter T. Casquino
The development of control program, data base, communication protocol, and audio response system of an intelligent terminal., Ali Najib Ballou
The development of efficient delivery routes in extremely short product life-cycle environments, Pisit Hetrakul
The development of feature based automated fixture process planning system for flexible assembly, Dong-Jung Suen
The development of glass-ceramic matrix composites and the crystallization of two glass-ceramic matrices, William M. Carty
The development of hybrid intelligent systems for technical analysis based equivolume charting, Thira Chavarnakul
The development of imaging techniques for analyzing cervical and lumbar vertebrae, Prathyusha Lingambhotla
The development of Mine Number One of the Chinook Coal Company, Limited, Lethbridge, Alberta, Canada, Theodore Saunders Dunn
The development of nickel silicide based alloy for sulfuric acid application, Sanhong Zhang
The development of plans for a national airport for Ankara, Turkey., Mehmet Ragip Samli
The development of simulator models for aircraft instruments and displays on the Apollo DN10000VS, Randall Lee Johnson
The development of spinels in two component coloring oxide systems and their applications as underglaze and overglaze colors, Michael Edward Green
The development of the Arthurian story in English and American literature from 1800 to the present time, Lucy Willeford McMahan
The development of the ethylene glycol process for the synthesis of ceramic oxides, Marvin Pennell
The development of the sonic pulse technique and its comparison with the conventional static method for determining the elastic moduli of rock, James Harold Deatherage
The diagenetic origin of the dolomites, chert, and pyrite in the Jefferson City formation., Erik Hans Schot
The dielectric properties of a synthetic fluor-mica formed by glass-ceramic fabrication techniques, Ray Fred Schumacher
The dielectric properties of thallium nitrate., Gene E. Gowins
The dielectric strength of some anti-corrosive paints., George Albert Chappell
The dielectric strength of some anti-corrosive paints., John Harvey Gustafson
The Diente Mining District, Abraham L. Fernandez
The difference effect and anodic behavior of hafnium dissolving in hydrofluoric acid, William Joseph James, James W. Johnson, and Martin E. Straumanis
The difficulty of approximating the chromatic number for random composite graphs, Jeffrey W. Jenness
The dinary numerical system and its applications to modern parallel processing computers, Hai Chi Koo
The directed Steiner problem on graphs: a simulated annealing approach, Lawrence Joseph Osborne
The discrete Prüfer transformation, Martin Bohner and Ondřej Došlý
The disintegration of refractory brick by carbon monoxide, Wilbur J. Darby
The disposal and utilization of coal ash wastes : Ash Pond Modification Project, James River Power Plant, Springfield, Missouri, Kevin Quentin Smith
The dissolution of deformed magnesium in sulfuric acid., William J. Daniels
The dissolution of magnesium in strong acids., Baldev Kumar Bhatia
The dissolution of magnesium in strong acids and neutral solutions, Cheng-ken Chi
The double beta-decay of tellurium-130., John Franklin Richardson
The doublet point method in unsteady aerodynamics and its extension to non-coplanar surfaces, Robert Joseph Weir
The downhole suspension and testing of an electrodynamic shear wave exciter, Robert Franklin Kehrman
The dynamic behavior of steel frame and truss buildings, Dixon Rea, Jack G. Bouwkamp, and R. W. Clough
The dynamic multiplier-accelerator model in economics, Julius Severi Heim
The dynamics and interaction of quantized vortices in the Ginzburg-Landau-Schrödinger equation, Yanzhi Zhang, Weizhu Bao, and Qiang Du
The dynamics of an annular piezoelectric motor stator, J. S. Dalton, Daniel S. Stutts, and R. L. Montgomery
The dynamics of coflowing round liquid jet in a Mach 1.5 air stream and the partial development of a particle image velocimetry system, Andrew Patrick Johnston
The dynamics of daily retail gasoline prices, Michael Davis
The dynamics of the guests in filled germanium clathrates, Fernande Grandjean, Werner Schweika, George S. Nolas, Brian C. Sales, Gary J. Long, Veerle Keppens, Pierre Bonville, David Mandrus, Hans M. Christen, and Raphaël P. Hermann
The eccentric orifice as a flow measuring device in small diameter pipes, James E. Casale
The economic factors governing the location and design of a fish meal plant, William Henry Hellwege
The economic feasibility of a longwall water-jet coal mining machine., Dennis Wright Williams
The economics and design of desalination by evaporation through porous, water-repellent membranes, Kuei-Hsiung Yang
The economics of engineering testing, Gerald Franklin Rackett
The economic spacing of contraction joints in reinforced concrete pavements, Wilbert Frederick Wegener
The effect and compensation of time-base perturbations in analog recording systems, Clifford D. Skouby
The effective autocorrelation function of maximum entropy spectra, Richard E. DuBroff
The effectiveness of internet-based technology in engineering education, Rosemarie Maffei Evans
The effectiveness of the Natural Resource Conservation Service (NRCS) and Huff rainfall distribution methods for use in detention basin design, Todd Wayne Dablemont
The effect of 15% MnO on the phase relations in the system CaO-FeO-SiO₂ at 1450ºC, Aquil Ahmad
The effect of a continuous low temperature on the operation of waste stabilization lagoons., Ralston Kennedy Dennis
The effect of added base on coal wetting ability of nonionic surfactant solutions used for dust control, J. Kim and Jerry C. Tien
The effect of added base on coal wetting ability of polyoxyethylene (POE) and polyglycerol-based nonionic surfactant solutions, J. Kim and Jerry C. Tien
The effect of addition agents in grinding Portland cement clinker, Eugene Farrell Hill
The effect of additive gaussian noise on the performance of a nonlinear bandlimited digital communication link, Denzil Jewarld Radford
The effect of additives and substrates on nonferrous metal electrodeposition, Zeyang Zhou
The effect of additives on properties of PFN-PFW dielectric materials, Weih-Min Liao
The effect of aging on the exfoliation corrosion characteristics of 7178 aluminum alloy, J. James Slavick
The effect of a graphite addition on oxidation of ZrB₂–SiC in air at 1500°C, Alireza Rezaie, William Fahrenholtz, and Greg Hilmas
The effect of air-entrainment on concrete containing chert gravel., Ali Erdogan Dinc
The effect of air turbulence on the rate of frost growth on a horizontal flat plate., Dennis Wayne Schulte
The effect of a knurled heat transfer surface upon pool nucleate boiling of normal pentane, Jerry James Carr
The effect of a large hole on the stress concentration factor of a satellite hole in a tension field, C. S. Sloan, M. D. Cowell, and T. F. Lehnhoff
The effect of alloying additions on the formation of secondary graphite in quenched and tempered nodular cast iron., Felipe A. Farinez
The effect of altering the oxygen partial pressure in the conventional growth environment upon the concentration of oxygen and carbon in Czochralski-grown single crystal silicon, Valerie Delores Butler
The effect of a lubricant on tool-workpiece interface., Kenneth Eugene Spencer
The effect of aluminum on bronze, Edward Dale Lynton
The effect of ammonium carbonate and aluminum chloride on the porosity of refractory material, William Gail Twyman
The effect of an induction field on transducers., Ratilal S. Patel
The effect of antimony, chloride ion, and glue on copper electrorefining., Lindell Robert Hurst Jr.
The effect of antimony on the assay of gold and silver ores, Herman Carl Hase and Charles Lewis French
The effect of argon flow rate and sonication intensity on the polymerization of a homologous series of methacrylates, Min-Jun Jang
The effect of a uniform layer of insulation on the temperature amplitude in periodic heat flow, Ralph E. Schowalter
The effect of availability improvement of a nuclear power plant on the cost of generating electricity, Seyyed Mohammad Reza Nejat
The effect of back pressure created by a venturi tube on power output and efficiency of an internal combustion engine., James J. Trace
The effect of bentonite on the transmission of pressure in green dry press blocks, Charles William McCaw
The effect of borehole deviation on the economics of shaft sinking by ground freezing., Gerald Raymond Gronbeck
The effect of boundry layer control by passing fluid through transverse slots on heat transfer from a pipe., Perakatte Joseph George
The effect of cable terminations on EMI measurements, Todd H. Hubing
The effect of cadmium on anaerobic digestion, Lyle Lynn Pruitt
The effect of calcium chloride on air-entrained concrete, Gerard Francis Hofstaedter
The effect of camber on force generation in leading edge/trailing edge switching hovering mode, Taylor A. Swanson and Kakkattukuzhy M. Isaac
The effect of carbonate karst terrain on water quality, Robert Russell Kilgo
The effect of carbon distribution on the manganese magnetic moment in bcc Fe-Mn alloy, N. I. Medvedeva, David C. Van Aken, and Julia E. Medvedeva
The effect of carbon on the loss of room-temperature damping capacity in copper-manganese alloys, Shashi Laddha, David C. Van Aken, and Huh-Tswen Lin
The effect of cathodic protection on the stress corrosion characteristics of 300M low alloy steel, John Pechonick
The effect of cation size of xanthate collectors in sulphide flotation., R. W. Bourne
The effect of certain minerals upon the volatilization of silver chloride, Boyd Dudley Jr.
The effect of changes in taxation legislation on Australian mining company profitability, Stewart Gillies and E. G. Thomas
The effect of clays on the properties of masonry cement, William Joseph Smothers
The effect of collagen and chloride additions on electrolytic copper deposits., William P. Lorenz
The effect of combined torsional and bending loads on a channel beam with one end restrained from warping, David M. Schaeffer
The effect of compactness on the carbothermal conversion of interpenetrating metal oxide/resorcinol-formaldehyde nanoparticle networks to porous metals and carbides, Nicholas Leventis, Naveen Chandrasekaran, Anand G. Sadekar, Sudhir Mulik, and Lia Sotiriou-Leventis
The effect of concentration on the viscosity of dilute and moderately concentrated polymer solutions, Hwa Luh
The effect of concentration on the viscosity of polyisobutylene solutions, Lung-Yu Chou
The effect of contact angle, surface roughness, and adsorption of heterogeneous nucleation of condensing water, Prafulla Chandra Mahata
The effect of controlled premature drying on 7 and 28 day compressive strength of concrete test cylinders., Vernon P. Boehme
The effect of copper, acid, and temperature on the diffusion coefficient of cupric ions in simulated electrorefining electrolytes, Michael S. Moats, J. Brent Hiskey, and Dale W. Collins
The effect of copper upon the eutectoid reaction in the zinc-aluminum system, Paul Theodore Corcoran
The effect of corporate governance on the valuation of book value and earnings during the Asian financial crisis, P. Davis-Friday, LiLi Eng, and Chao-Shin Liu
The effect of crystallinity on diffusion of ṉ-hexane in polyethylene, Dan Cong Nguyen
The effect of Cu-doping on the magnetic and transport properties of La₀.₇Sr₀.₃MnO₃, M. S. Kim, Jinbo Yang, Qingsheng Cai, X.-D. Zhou, William B. Yelon, Paul Ernest Parris, and William Joseph James
The effect of diameter on the film boiling behavior of liquid nitrogen, William Joseph Wafer
The effect of different loading systems on shear stress distributions by photoelasticity., Larry Ralph Buschling
The effect of different rates of ram movement on the transmission of pressure in dry pressed bodies, Frank Joseph Zvanut
The effect of disclosure level on properties of analysts' earnings forecasts and size of analyst following, LiLi Eng and H. K. Teo
The effect of drug use on wages: A human capital interpretation, Richard R. Bryant, V. A. Samaranayake, and Allen Wilhite
The effect of electrical lubrication on the transmission of pressure in dry pressed bodies, Oliver William Kamper
The effect of electrodes in the thermally stimulated currents in sodium silicate glass, Ruth Mogrovejo Cuzmar
The effect of end supports on the behavior of braced girts and purlins, Dimos Polyzois and Peter C. Birkemoe
The effect of epoxy resin in stone and slag concrete, James Chun-Min Chou
The effect of epoxy resins on the durability and unconfined compressive strength of an A-1B soil, Guy H. Payne
The effect of epoxy resins on the plasticity index of an A-6 soil, A. R. Van Steenbergen
The effect of excess lead oxide on the sintering characteristics and dielectric properties of lead magnesium niobate ceramics, Dyllan Jye-Lun Hong
The effect of excitation limits on voltage stability, Jyothi Ayyagari and Mariesa Crow
The effect of explosive charge length of cratering, John M. Mason
The effect of fiber annealing on the properties of an optically transparent PMMA composite, Hongy Lin, Seung-Gu Kang, D. E. Day, and James O. Stoffer
The effect of finite sensor beamwidth on the performance of a horizon correlation guidance system., Paul Webster Sapp
The effect of flange restraint on web crippling strength, Bhavnesh H. Bhakta
The effect of flange restraint on web crippling strength, Bhavnesh H. Bhakta, Roger A. LaBoube, and Wei-wen Yu
The effect of flange restraint on web crippling strength of cold-formed steel Z- and I-sections, Darryl E. Cain
The effect of flange restraint on web crippling strength of cold-formed steel Z- and I-sections, Darryl E. Cain, Roger A. LaBoube, and Wei-wen Yu
The effect of foundation shape on dynamic parameter of bases, Duan Shiwei
The effect of free chlorine and monochloramine on lead in drinking water and epitaxial electrodeposition of tin sulfide, Sansanee Boonsalee
The effect of friction stir processing on the microstructure and mechanical properties of equal channel angular pressed 5052Al alloy sheet, Nishant Kumar, Rajiv S. Mishra, C. S. Huskamp, and Krishnan K. Sankaran
The effect of gap graded aggregate on the properties of hot mix asphaltic concrete., Maurice Loren Northcutt
The effect of gating on soundness of Al-alloy permanent mold castings, Dinesh Shantilal Patel
The effect of glaze fit upon the strength of Missouri Zadock, Karl Emil Krill and Floyd Rolland Elliott
The effect of grain size on shearing strength of sand, Keyhan Samimi
The effect of grain sizing on the strength and porosity of refractory grog bodies, Robert Stafford Green
The effect of graphite and insulating coatings on the solidification of aluminum and thermal cycling of a cast iron permanent mold, John Ross Dillingham
The effect of haunched members on Vierendeel trusses., Rashmikant D. Parikh
The effect of heating chill cast eutectics, Robert Lewis Dreshfield
The effect of high gas flowrates on the performance of a counter-current reaction launder(CCRL) process for metal refining, K. Narayana Swamy, D. G. C. Robertson, and Kent D. Peaslee
The effect of hot calendering of the substrate on the barrier properties of poly(vinyl alcohol)-coated papers, Thomas P. Schuman, Magnus Wikström, and Mikael Rigdahl
The effect of impeller speed and air-volume on the flotation rate with respect to particle size., William Edward Horst
The effect of impurities and additives on the electrowinning of zinc, Haruhisa Fukubayashi
The effect of impurities on the time dependence of the surface tension of aqueous surfactant systems, Elizabeth Ann Munson
The effect of initial moisture content on the swelling characteristics of Putnam soil, William Howell Branum
The effect of inlet air temperature on the efficiency of a spark ignition engine, John B. Toomey Jr.
The effect of inlet conditions and tank geometry on the thermal performance of stratified chilled water storage, Kelly Homan
The effect of insoluble sulphates on the volumetric determination of lead, Mervin Joe Kelly and Ralph Knappenberger
The effect of kinematics on flapping wing performance, Jessica Rolwes
The effect of lateral cortex disruption and repair on the stability of the medial opening wedge high tibial osteotomy, B. S. Miller, W. O. P. Dorsey, J. C. Austin, and Cari R. Bryant
The effect of low molecular weight organosiloxane substituents on mesophase formation and structure in non-symmetric nickel(II) complexes, Isabel M. Saez, Georg H. Mehl, Ekkehard Sinn, and Peter J. Styring
The effect of lubri-coolant application at the tool-chip interface on tool forces, Bomi Ardeshir Hathikhanavala
The effect of matrix condition in the solution of a system of linear algebraic equations., Herbert R. Alcorn
The effect of matrix microstructure on cyclic response and fatigue behavior of particle-reinforced 2219 aluminum Part I, G. M. Vyletel, J. E. Allison, and David C. Van Aken
The effect of matrix microstructure on cyclic response and fatigue behavior of particle-reinforced 2219 aluminum Part II, G. M. Vyletel, David C. Van Aken, and J. E. Allison
The effect of metallic and inert electrodes on the electrochemical degradation of alkyl benzene sulfonate., Thomas Patrick O'Farrell
The effect of metallic naphthenates on the oxidation of linoleic acid., David E. Troutner
The effect of microalloying B on the high temperature mechanical properties of Ti₃Al, Joseph William Newkirk and Gerald B. Feldewerth
The effect of microstructural scale on hardness of MoSi₂-Mo₅Si₃ eutectics, D. P. Mason and David C. Van Aken
The effect of microstructure on the liquid corrosion of sodium chloride and aluminum oxide, Michael Lee Millard
The effect of military service on the subsequent civilian wage of the post-Vietnam veteran, Richard R. Bryant, V. A. Samaranayake, and Allen Wilhite
The effect of moisture content on the action of sea coal in molding sands., Robert J. Endres
The effect of moisture on the compressive and tensile strength on a variety of rock materials, Richard A. Martin
The effect of mold coating and mold matrix on the thermal fatigue and mechanical fracture of continuously cast gray iron permanent mold inserts, Kenneth Michael Martinez
The effect of molybdate on the anodic oxidation of acetylene, Robert Elroy Kuhlmann
The effect of multiple monitor display on user performance and multi-tasking, Jacob M. Truemper, Hong Sheng, Michael Gene Hilgers, Richard H. Hall, and Morris Kalliny
The effect of nanoparticles on the structure of clay suspensions, Jason Baird and J. Y. Walz
The effect of near-surface metallurgy on the machinability of cast iron, William Dewey Peach
The effect of nickel on activated sludge, James Robert Matthews
The effect of non-linearity on a frequency-modulated wave, Tzu-Tien Hung
The effect of occluded air in dry-press mixes, William Raymond Powell
The effect of oil quench severity on the properties of hardened SAE 4140 steel, David Allen Akers
The effect of optimal arterial cycle length on intersection delays in a coordinated arterial system, Navin Sugathan
The effect of oxygen partial pressure on oxygen and carbon incorporation in Czochralski grown single crystal silicon, Paul Shane Carter
The effect of oxygen partial pressure on the wetting of SiC, AlN, and Si₃N₄ by Si and a method for calculating the surface energies involved, P. D. Ownby and M. W. Barsoum
The effect of peroxide stabilizers on the corrosion protection of sprayed and electrodeposited cerium-based conversion coatings on Al 2024-T3, Elizabeth A. Kulp, Surender Maddela, Matt OKeefe, and William Fahrenholtz
The effect of phase distortion on the perceived quality of audible monaural signals, Iwan Sudrajat
The effect of pH on phase reversals of protein-stabilized emulsions., Samuel Arthur Bradford
The effect of phosphate additives on alumina, alumina-calcia, alumina-silica refractory castable systems, Sukendro Widjaja
The effect of phosphate source on the post-treatment of cerium based conversion coatings on Al 2024-T3 and its correlation to corrosion performance, Daimon K. Heller, William Fahrenholtz, and Matt OKeefe
The effect of phosphoric acid on compaction and shear characteristics of pure kaolin clay., Bhupat Hargovinddas Mehta
The effect of plane wave reflection upon polarization., John Mitchell Willcox
The effect of plasma deposited polymers on the nucleate boiling behavior of copper heat transfer surfaces., Thomas Alan Hinrichs
The effect of plastic deformations on grain boundaries., Jayendra Jamnadas Shah
The effect of platinum and excess 211 phase on the loss of the liquid phase in melt textured Yba₂Cu₃O₇₋ₓ, William C. Hicks, Fatih Dogan, Michael Strasik, Arthur C. Day, and Kevin E. McCrary
The effect of polymer structure on drag reduction in nonpolar solvents, Gin Chain Liaw
The effect of porosity on strength degradation in thermally shocked alumina, Russell David Smith
The effect of post-treatment time and temperature on cerium-based conversion coatings on Al 2024-T3, Daimon K. Heller, William Fahrenholtz, and Matt OKeefe
The effect of preservatives on the inflammability of wood, Merton Ira Signer
The effect of pressure on the response of a D.C. electron capture detector, Shubhender Kapila and Walter A. Aue
The effect of pressure prehydration on the strengst of hydraulic cement concrete., Thomas Holmes Whitfield
The effect of prior cold work on the pressure welding of ferritic nodular iron, Ronald Morris Ledbetter
The effect of rare earth additions on low alloy steel., Sukh Dev Sehgal
The effect of recycle on the acid hydrolysis of corn stover, Mark Stanley Ziobro
The effect of reheating certain fire brick on pyrometric cone equivalents, Francis J. Louney
The effect of reinforced concrete building modeling on dynamic and stability characteristics, Don Michael Davis
The effect of relative placement of thermal mass and insulation on heating and cooling loads, energy use, and passive design for the building envelope., Charles Frank Rhein Jr.
The effect of reradiation on heat transmission., Arvindkumar M. Shah
The effect of rock strength on perimeter blasting and the blastability of massive rock, Paul Nicholas Worsey and Q. Chen
The effect of rope speed and moisture on mine scrapers, Ronald L. Carmichael
The effect of selected alloying elements on the hardness and microstructure of ductile cast iron, Chi-Hua Edward Tseng
The effect of shear deformation on the slope deflection coefficients., Rajni C. Amin
The effect of silicate ion and hydroxyl ion on the abstraction of potassium ethyl xanthate by galena, Pao-Zung Wu
The effect of sintering atmosphere on dielectric properties of commercial ceramic capacitors., Shailendra Kumar
The effect of small additions of niobium upon the corrosion rates and electrochemical potentials of iron in HCl, HF, and H₂SO₄, Richard Lee Jones
The effect of small alloy additions on the quench induced texture of alpha uranium, Kenneth Ray Riggs
The effect of small amounts of chrome ore on dry press diaspore refractories, Allen John Reid
The effect of soil type on the removal of nutrients from a secondary wastewater effluent by land application., Richard Linn Smith
The effect of solvent on adhesion of coatings to plastics, Thomas P. Schuman
The effect of solvents on the desorption of phenol from carbon, Robert Harold Pahl
The effect of solvents on the desorption of phenol from carbon in a water free system, William W. Knickmeyer
The effect of spontaneous crystallization of some inorganic compounds at the critical temperature of their solvents, John William Buttrey
The effect of steam as a combustion retarding agent in the gasification of crude oil by partial combustion, Harry Adam Grine
The effect of stiffening on the maximum stress in a flat plate, Michael Gerard Duchek
The effect of stiffening on the stress concentration in a flat plate with a hole, Michael Gerard Duchek and T. F. Lehnhoff
The effect of stoichiometric variations on the magnetic structure of Y₆Mn₂₃, William Joseph James, T. G. D. Van Schalkwyk, and Cyrus E. Crowder
The effect of stoichiometry on Markov chain models for chemical reaction kinetics, Firoz D. Antia and Sunggyu Lee
The effect of structure on the consolidation characteristics of a clay soil, Dale E. Sukow
The effect of structure on the consolidation of compacted unsaturated clay soils, William Joseph Graham
The effect of submerged jets on the hydraulic jump, Harvey E. Jobson
The effect of sulphur dioxide gas on sweet potatoes, cotton, and sorghum cane plants, Milburn Leo Dorris
The effect of supercritical water on crude glycerin solution, Jared Bouquet
The effect of surface roughness, cure pressure, and temperature level on the thermal resistance of bonds and contacts., David Leo Schwaller
The effect of temperature and imperfect bonding on the mechanical properties of ceramic matrix composites, Douglas R. Carroll
The effect of temperature on mine rocks, James Wilson Snider
The effect of temperature upon the crystal size and physical properties of iron and steel, Earl Joesting McNely
The effect of temper carbon nodule number on the physical properties of a malleable iron., William Joseph Ruprecht
The effect of texture on the petrophysical properties of dolomite: evidence from the Cambro-Ordovician of Southeast Missouri, Robert E. Woody
The effect of the convection coefficient on the temperature amplitude in periodic heat flow, Gordon L. Scofield
The effect of the degree of saturation on the permeability of a compacted clay to organic permeants, Mark Alan Harms
The effect of the fixture-workpiece system on machining accuracy in milling, Paul Han Keong Lim
The effect of the oxidant used during polymerization on the solid-state decomposition kinetics of poly(4-methyl catechol), Fatih Dogan, Harika Topallar, İsmet Kaya, and Mehmet Yürekli
The Effect of the oxide interface on the material and electrical properties of polysilicon contacts, Dorothea E. Burk, Joseph William Newkirk, and Myung-Suk Jo
The effect of the physical and chemical nature of titanium diboride on its wettability by aluminum, G. Ackart, P. D. Ownby, W. J. Krafick, and D. A. Weirauch Jr.
The effect of the pore structure and zeta potential of porous polymer monoliths on separation performance in ion-exchange mode, Brian A. Grimes and Athanasios I. Liapis
The effect of the presence of certain base metals on the ability of amalgams to catch gold and silver, Ray Gould Knickerbocker
The effect of the rare earth elements on the hot workability of ingot iron., L. A. Neumeier
The effect of thermal-mechanical processing of the exfoliation corrosion resistance of an aluminum-zinc-magnesium-copper alloy, James Lawrence Spehr
The effect of the rolling load on the micro-structure of low carbon sheet steel., Jerry Lee Cadden
The effect of the static compaction on the mechanical and physical properties of asphalt concrete hot-mixes., Abdel-Gawad Abdel-Raouf Bahgat
The effect of the ultraviolet portion of the sun spectrum on chlorine residuals in water supplies., Tumkur Mohmed Ameer Ahmed
The effect of titanium surface roughening on protein absorption, cell attachment, and cell spreading, Satoru K. Nishimoto, Miyako Nishimoto, Sang-Won Park, Kwang-Min Lee, Hyun-Seung Kim, Jeong-Tae Koh, Joo L. Ong, Yongxing Liu, and Yunzhi Yang
The effect of today's residential electric consumer on the planning, design, and operation of electrical distribution systems, James Wilbur Stephens
The effect of toolpath intersection angle in metal deposition, Jianzhong Ruan, A. Hayes, Todd E. Sparks, and Frank W. Liou
The effect of urban detention on potential stream erosion, Errin Scott Kemper
The effect of using different rock failure criteria in wellbore stability analysis, Reza Rahimi
The effect of variations in compensator tuning parameters on processes with significant dead time, Luluck
The effect of variations in the rate of heating on the P.C.E. value of clays, Kenneth Emerson Evans
The effect of varied additions of five elements and holding time on the microstructure of ductile cast iron, Michael Joseph Gross
The effect of various binders and moisture content on the apparent thermal conductivity of green foundry sand, Robert V. Wolf
The effect of various methods of grinding on the physical properties of unfired dry press brick, Edwin Theodore Harvey
The effect of various UPFC operating points on transient stability, Mahyar Zarghami and Mariesa Crow
The effect of varying sea coal fineness on sea coal activity in molding sands, Laurence A. Cooley
The effect of varying seismic input directions of three-dimensional interacting ground motions on box-type reinforced concrete and steel structures, James A. Volker
The effect of vegetation, soil, and rock type on runoff from some small watersheds in Missouri, Anant Suthipas Narupon
The effect of viscoelastic additives on jet structures, J. L. Zakin and David A. Summers
The effect of welding and microstructure variables on carbides and impact properties in ductile cast iron weldments., Yutaka Hirota
The effect of zinc vapor on the DC resistance of polycrystalline zinc oxide, John Jeffrey Venarsky
The effects and fate of selected veterinary antibiotics in two Missouri anaerobic swine lagoons, Keith A. Loftin
The effects of 4-Hydroxynonenal and N-Acetyl-L-cysteine on c-Myc induced apoptosis, Deniz Yildiz
The effects of a compliant workpiece on the input/output characteristics of rigid-link toggle mechanisms, Larry L. Howell and Ashok Midha
The effects of added nanoparticles on aqueous kaolinite suspensions. II. Rheological effects, Jason Baird and J. Y. Walz
The effects of added nanoparticles on aqueous kaolinite suspensions: I. Structural effects, Jason Baird and J. Y. Walz
The effects of advertising and brand value on future operating and market performance, LiLi Eng and Hean Tat Keh
The effects of backmixing and nonequilibrium in multistage countercurrent liquid-liquid extraction., James Marion Eye
The effects of Ba₆Ti₁₇O₄₀ on the dielectric properties of Nb-doped BaTiO₃ ceramics, X. Xu and Greg Hilmas
The effects of carbon-to-oxygen ratio upon supercritical water reformation for hydrogen production, Jared Bouquet, Ryan Tschannen, Alejandro Gonzales, Jason W. Picou, and Sunggyu Lee
The effects of cellular recycle., Edmund Arthur Kobylinski
The effects of certain impurities and their interactions on zinc electrowinning, Donald Ralph Fosnacht
The effects of chemical protective suits on human performance, Susan L. Murray, Yvette L. Simon, and Hong Sheng
The effects of congressional elections on future equity market returns, Vincent Ovlia, Michael Davis, and David Lee Enke
The effects of Congress on presidential elections on future equity market returns, Vincent Ovlia
The effects of CO₂, SO₂, and temperatures on blende roasting, Monroe Farrar
The effects of fly-ash on dynamic modulus of elasticity of a concrete mortar, Bill L. Atchley
The effects of frictional restraint on the stability of a simple strut, M. H. R. Godley
The effects of gamma irradiation on RF plasma-formed polymers., William F. Oberbeck Jr.
The effects of granular size on the thermal conductivity., Kanubhai M. Patel
The effects of granular size on the thermal conductivity of fine sand., Fikri Yalvac
The effects of grinding on the physical properties of clay soils, Thomas Michael McMillen
The effects of highly porous refractory materials on steel ladle heat loss, Mangesh Vibhandik
The effects of high pressure and temperature environments on the properties of 6061-T651 aluminum, Patrick George Davidson
The effects of intense sound levels and steady flow on the propagation of plane-waves in air, Wuu Hao
The effects of intentional weight loss as a latent variable problem, Christopher S. Coffey, Gary L. Gadbury, Kevin R. Fontaine, Chenxi Wang, Richard Weindruch, and David B. Allison
The effects of leadership style on total quality management implementation, Rhonda Diane Turvey
The effects of low concentrations of sulphur dioxide on oxidized manganese ores at elevated temperatures, William Henry Magill
The effects of magnetic fields upon the steady state and short circuit performance of low voltage multi-link fuses, John Thomas Schultz
The effects of melt history on the failure characteristics of pristine glass fibres, Richard K. Brow, Nathan P. Lower, Charles R. Kurkjian, and Hong Li
The effects of mine fog and vibration sources on an experimental ground convergence monitor, Tristan H. Jones, Steve Eugene Watkins, Randy Hays Moss, and Derek Apel
The effects of mining subsidence on a motorway bridge, C. J.F.P. Jones
The effects of moisture in grog upon dry pressed mixes containing grog, Charles L. McKinnis
The Effects of Offering Method and Trading Location on the Pricing of IPOs in Singapore, LiLi Eng, A. C. H. Khoo, and R. S. K. Tan
The effects of personal protective equipment Level A suits on human task performance, Yvette L. Simon
The effects of personal protective respirators on human motor, visual, and cognitive skills, Anas Ahmed AlGhamri
The effects of pressure and water-to-carbon ratio upon the supercritical water reformation of crude glycerin solution for hydrogen production, Alejandro Gonzales, Jared Bouquet, Ryan Tschannen, and Sunggyu Lee
The effects of selected impurities on the electrocrystallization of zinc, Laura Webber Blaser
The effects of selected impurities on the electrocrystallization of zinc, Laura Webber Blaser, Thomas J. O'Keefe, and William Joseph James
The effects of sodium, barium and calcium chloride upon the physical properties of a whiteware body, William Newton Coffman
The effects of somatostatin on platelet aggregation and ATP release, Nuran Ercal, H. Koylu, M. Ercan, A. Yalcin, D. Balkanci, S. Yorukan, and O. Andac
The effects of space time and glycerin to methanol ratio upon the supercritical water reformation of crude glycerin solution for hydrogen production, Ryan Tschannen, Jared Bouquet, Alejandro Gonzales, and Sunggyu Lee
The effects of space time upon the supercritical water reformation of glycerol, Jared Bouquet, Jonathan E. Wenzel, Jason W. Picou, Michael S. Stever, Sunggyu Lee, T.-H. Lim, and Byung Gwon Lee
The effects of storm rainfall intensity on the response time characteristic of watershed runoff, Todd G. Wagner
The effects of substituting iron for manganese in SmMn₆Ge₆: magnetic and crystallographic properties, J. Han, William B. Yelon, Naushad Ali, I. Dubenko, G. K. Marasinghe, Ph. I'Héritier, and William Joseph James
The effects of sulphur and copper and hot-workability of pure iron., Hung-Chi Chao
The effects of surface flaw density and configuration on fracture stresses of a triaxial porcelain., William H. Daniels
The effects of technology on literacy(s), Thomas Glen Petersen
The effects of temperature upon cement mortar, Herman C. Cowen and Phillip Florreich
The effects of temperature upon the supercritical water reformation of a crude glycerin solution for hydrogen production, Jared Bouquet, Ryan Tschannen, Alejandro Gonzales, Michael S. Stever, and Sunggyu Lee
The effects of temperature upon the supercritical water reformation of alcohols for hydrogen production, Jared Bouquet, Jason W. Picou, Michael S. Stever, Jonathan E. Wenzel, Ryan Tschannen, and Sunggyu Lee
The Effects of the Asian Crisis, Corporate Governance and Accounting System on the Valuation of Book Value and Earnings, P. Davis-Friday, LiLi Eng, and Chao-Shin Liu
The effects of the coulomb interaction between outgoing electrons in electron impact ionization processes, Andrew Richard Prideaux
The effects of the flyer plate's radius of curvature on the performance of an explosively formed projectile, P. Mulligan, Jason Baird, and J. Hoffman
The effects of the ʺOld Lead Beltʺ mining district of southeastern Missouri on the water quality and sediments of the Big River basin., Walter H. Zachritz
The effects of toradol on postoperative intimal hyperplasia in a rat carotid endarterectomy model:laboratory research, Venkat R. Kalapatapu, Leighton Satterfield, Aliza T. Brown, Honggjiang Chen, Nuran Ercal, Tulin O. Price, Jie Gao, Khalil Ibrahim, and Mohammed M. Moursi
The effects of ultrasonically-induced cavitation upon dissolved oxygen, free carbon dioxide, and bicarbonate ion concentration in water., Charles Alvin Wentz
The effects of uranium on the structure of iron phosphate glasses, Mevlüt Karabulut, G. K. Marasinghe, M.-L. Saboungi, D. Haeffner, S. Shastri, C. S. Ray, Y. S. Badyal, and D. E. Day
The effects of variable molecular weight and solvents, in water-reducible acrylic resins, John Adrion Jones
The effects of varying stemming lengths and bench heights on certain design variables and resultant fragmentation in bench blasting, Bruce Carlton Townes
The effects of via transitions on differential signals, Chen Wang, Jun Fan, James L. Knighten, Norman W. Smith, Ray Alexander, and James L. Drewniak
The effects of VIP on ATP release from platelets, Nuran Ercal, H. Koylu, A. Yalcin, M. Ercan, M. Sarsilmaz, and K. Erbil
The effects of washout in polydispersed metalic aerosols., Jerry N. Burford
The effects of water on sympathetic detonation and dead pressing of dynamite and emulsions, Adam Michael Doerfler
The effects of water to fuel ratio on the kinetics of supercritical water reformation of jet fuel, Satya Putta
The effects of wearing respirators on human fine motor, visual, and cognitive performance, Anas Ahmed AlGhamri, Susan L. Murray, and V. A. Samaranayake
The effects of wetting and drying cycles on the dry density of compacted cohesive soils, Brian Keith Marick
The effects of window and delay selection on the spectrogram of a signal., Thomas Edward Burbridge
The effects of work/rest distribution on a paced inspection task., David Christopher Kornfeld
The effects select physical parameters have on an explosively formed projectile's performance, Phillip Russell Mulligan
The efficiency of the Kerruish Smoke Consumer and Coal Economizer, Arthur F. Truex and Gilbert F. Metz
The efficiency of the Rolla municipal power plant, true Walter Blake and Otto Allen Lunak
The efficiency study of the push-pull ventilation system in underground mine, X. Zhang, Y. Zhang, and Jerry C. Tien
The Effros metric, J. J. Charatonik and W. J. Charatonik
The eikonal distorted wave Born approximation for the excitation of hydrogen by impact with hydrogen and helium in the intermediate energy range, Richard Homer Shields
The elastic and anelastic constants of a synthetic fluor-mica formed by glass-ceramic fabrication techniques, John H. Ainsworth
The electrical analogy of critical speed for the transverse vibrations of a shaft with one, two and three masses., Ashok Z. Patel
The electrical characterization of cadmium telluride using Hall coefficient and conductivity measurements, Bradley Alan Foreman
The electrical properties of amorphous boron arsenide thin films., Gary J. Seiter
The electric field strength dependence of neutron-induced defects in silicon P-N junctions, Paul Edward Johnson
The electrochemical behavior of molybdenum in acidic chloride solutions, Mun-Shan Lee
The electrochemical behavior of the lead-thallium system in acidic sulfate solutions, Pedro Juan Aragon
The electrochemical degradation of alkyl benzene sulfonate., Melvin David Rickard
The electrochemical oxidation of 1,3-butadiene on Pt and Au-I steady-state kinetics, James W. Johnson, A. K. Agrawal, and William Joseph James
The electrochemical oxidation of 1-pentyne on platinum and gold, Michael Jensen Danielson
The electrochemical oxidation of crotonic acid, John L. Cannaday
The electrochemical reduction of crotyl alcohol, Chen-Yie Chien
The electrochemical reduction of fumaric acid on Hg-Bi cathodes, Chen Hwei Chi
The electrodeposition of cadmium telluride thin films., Nasr-Eddine Medelci-Djezzar
The electro deposition of lead in sugar and acetate solutions, Abe Lew Kaplan
The electrodeposition of metals and alloys using pulsed current, Chong Ho Sonu
The electrodeposition of zinc; changes in current efficiency and surface structure resulting from various addition agents, Haruhisa Fukubayashi
The electrolysis of potassium lead tartrate solutions, Reginald Scott Dean
The electrolysis of the water of a copper sulphate solution, Ralph Barker
The electrolytic recovery of copper from rod mill pickling solution at the Hawthorne works of the Western Electric Company, Incorporated, James Walter Scott
The electrolytic recovery of silver from waste silver residues, Bailey Warren Hagar
The electrolytic refining of copper, Lewis S. Logan and Frank R. Bell
The electrolytic separation of copper, nickel and precious metals from copper-nickel matte, Oden Cass Garst
The electronic passport and the future of government-issued RFID-based identification, G. Matthew Ezovski and Steve Eugene Watkins
The electro‐oxidation of acetylene on heterogeneous Au‐Pt alloys, James W. Johnson, Christopher Kuo-chieh Wu, and William Joseph James
The EMI benefits of ground plane stitching in multi-layer power bus stacks, Xiaoning Ye, Min Li, Wei Cui, S. Radu, James L. Drewniak, Todd H. Hubing, Richard E. DuBroff, Thomas Van Doren, and David M. Hockanson
The energy levels of potassium chloride, Clifford L. Adams
The engineering land-use planning of the Harry S. Truman dam site area, Benton County, Missouri., Michael James King
The engineering of construction specifications for externally bonded FRP composites, Xinbao Yang
The enigma of helium and anomalous xenon, Oliver Manuel
The environmental geology of the Ebenezer Quadrangle Greene County, Missouri., Jerry D. Higgins
The environmental remediation of Clark Island - a former Alliedsignal Inc. site 10.02, Romeo Ciubotariu, Charles E. Schneeberger, Marie-Claude Wilson, and William J. Hague
The environmental remediation of Clark Island - a former Alliedsignal Inc. site 10.02, Romeo Ciubotariu, Charles E. Schneeberger, Marie-Claude Wilson, and William J. Hague
The EPR spectra of poly(chloro-para-xylylene) in vacuum and in air, Maciej Gazicki, William Joseph James, and H. Yasuda
The equalization and optimization of a third-order type-1 position control system., Viswanatha Seshadri
The equilibrium of the reaction ZN + CO₂ = ZNO + CO, Clarence Ware Burkhart
The equivalent noise bandwidth of IIR digital filters produced from analog prototypes, Bari E. Greenberg
The error and timing of a modular microprocessor based data acquisition system., John Michael Donovan
The error function and carburization, David C. Van Aken
The establishment and analysis of a triangulation system for the teaching of advanced surveying, Philip Blaine Newlin
The estimate of the effect of z-pins on the strain release rate, fracture and fatigue in a composite co-cured z-pinned double cantilever beam, Larry W. Byrd and Victor Birman
The Ethernet and the validation of the network II.5 simulator program, Joseph G. Jingle
The evaluation of an activated sludge process at elevated temperatures, Peter J. Dawson
The evaluation of radar guided missile performance using various target glint models, Franklin Delano Hockett
The evaluation of the influence of large aggregate on the permeability of single-grained soils., Edward Clayton Grubbs
The evolution of Ga and As core levels in the formation of Fe/GaAs (001): A high resolution soft x-ray photoelectron spectroscopic study, Tiehan H. Shen, Denis Greig, Mark Hopkinson, George Daniel Waddill, Jamie D. W. Thompson, James R. Neal, Simon A. Morton, James G. Tobin, and Jim A. D. Matthew
The evolution of sealing practice under the principles of risk assessment criteria appropriate to individual mines, Stewart Gillies, Hsin Wei Wu, and J. W. Oberholzer
The evolution of the lower Missouri River: stratigraphy, geomorphology, and habitat dynamics at Lisbon Bottom, Jeffrey Spooner
The exact solution to a simple nongray radiative transfer problem, Alfred L. Crosbie and R. Viskanta
The examination and treatment of industrial magnesium foundry wastes, Oden Cass Garst
The existence of multiple equilibria in the UPFC power injection model, Mahyar Zarghami and Mariesa Crow
The expansion of doped lanthanum chromite in a reducing atmosphere, Christopher Travis Leach
The Experience of a dam founded on difficult rock foundation, Jian-Yun Mei and Yu-Yin Guo
The experimental determination and prediction of ternary-liquid equilibria data., Risdon William Hankinson
The experimental fabrication of titanium magazines for 3 inch 50 caliber twin and single gun mounts, John M. Thorp
The Express Highway through the city of St. Louis, Fulton Hord Campbell
The extension of blotch features for melanoma discrimination in dermoscopy images, Azmath Khan
The extent of the customer activated industrial product idea paradigm, David Clark Strahorn
The extraction of gold and silver from ore by the cyanide process, Isaac Peter Frazier and Claude Egan Jamison
The extraction of turbulent diffusion information from experimental data of high-speed flow: a preliminary investigation using numerical simulations, Laura Ann Gogel
The fabrication of commercial size coal logs using a hydrophobic binder, Brent Allen Ward
The factors influencing the price of metals on the metal market, Thomas Patrick F. Walsh
The failure and the remedial containment dike on a lacustrine clay, Chitta R. Gangopadhyay and Richard O. Anderson
The failure criteria and deformational moduli of granular rock, Kyung Chul Ko
The failure of a cut slope on the tuen mun road in Hong Kong, S.R. Hencher and R.P. Martin
The failure of a soil blanket lining caused by the action of bacteria, G.W. Plant and P.B.B. Voslo
The failure of oil storage tanks and their control, Stanislav Dovnarovitch and Yurji Ivanov
The Faraday rotation and dispersive doppler effects in the ionosphere at oblique incidence, Charles Roland Baugher II
The fast affine projection algorithm, Steven L. Grant and S. Tavathia
The feasibility of strip mine reclamation by inducing slope stability failures., John Michael Pool
The feasibility of the use of telecommunicated courses in Latin American universities, Erland Jose Martinez
The feasibility of using Bifidobacteria bifidum (ATCC 700541) for the production of prebiotic oligosaccharides, Candice Marie Luehrs
The feasibility of wood as an energy source for electric power generation in South Central Missouri., Lawrence Wray Wetzel
The Fe-O coordination in iron phosphate glasses by x-ray diffraction with high-energy photons, Uwe Hoppe, Mevlüt Karabulut, Ezz Metwalli, Richard K. Brow, and P. Jovari
The F₄₂₀H₂-dehydrogenase from methanolobus tindarius: cloning of the ffd operon and expression of the genes in escherichia coli, David J. Westenberg, Annett Braune, Claudia Ruppert, Volker Müller, Christina Herzberg, Gerhard Gottschalk, and Michael Blaut
The field evaluation of a synthetic material for use as a slope protection method on irrigation dams., Dennis Lee Dutton
The film "blow-off" experiments, Partho Neogi
The finite-difference time-domain method and applications in electromagnetic compatibility, David M. Hockanson
The finite element duct eigenvalue problem: An improved formulation with Hermitian elements and no-flow condensation, R. Jeremy Astley and Walter Eversman
The first oxovanadium(V)-thiolate complex, [VO(SCH₂CH₂)₃N], Kausik K. Nanda, Ekkehard Sinn, and Anthony W. Addison
The first second-row triketone complex structure: Synthesis and properties of a substituted (1,3,5-pentanetrionato) (μ-oxo)bis(dioxomolybdenum(VI)), Londa L. Borer and Ekkehard Sinn
The first uranium based liquid crystals. Uranyl metallomesogens from β-diketone and tropolone ligands, Stephen L. Clark, James M. Elliott, John R. Chipperfield, Peter J. Styring, and Ekkehard Sinn
The fissure system of El Potosi Mine of El Potosi Mining Company, Santa Eulalia, Chihuahua, Mexico, Carl E. Millikan
The flapper figure in Ellen Glasgow's 1920s fiction, Kathleen Morgan Drowne
The flood control system of Newport, Ark., Alvis Frederick Denison
The flood frog: an autonomous wireless device for flood detection and monitoring, Valerio Plessi
The flotation of a West Joplin, Mo. slime, John Stone Hoffman and James Joseph Dowd
The fluorescence of uranium in solid solution, Robert Emmett Kelly
The fluorine and manganese content of certain Missouri waters, Erwin Charles Hoeman
The forecasting classification grid: a typology for method selection, Roger Calantone, Lance Gentry, and Shaojie Cui
The forge welded iron cannon at Bada Burj of Golconda fort rampart, R. Balasubramaniam, Surender Maddela, and J. Shankar
The forge welded iron cannon near Fateh Burj of Golconda fort rampart, Surender Maddela, J. Shankar, and R. Balasubramaniam
The Formal description of resource deadlock in distributed systems, Pei-Yu Li
The formal reconstruction and speedup of the linear time fragment of Willard's Relational Calculus Subset, Deepak Goyal and Robert Paige
The formation of negative- and positive-segregated bands during solidification of aluminum-copper alloys, Q. Z. Diao and Hai-Lung Tsai
The formation of third generation Poly(pyrazolyl)borate ligands from alkyne coupling reactions of Fe[(p-IC₆H₄)B(3-Rpz)₃]₂ (R = H, Me; pz = pyrazolyl): pathways toward controlling an iron(II) electronic spin-state crossover, Daniel L. Reger, William R. Gemmill, Mark D. Smith, Ahmed M. Shahin, Gary J. Long, Leïla Rebbouh, Fernande Grandjean, and James R. Gardinier
The foundation of the right bank in Wadi-Zarat Dam, M. Atalla, K. Rabah, and M.A. Benltayf
The foundations of Lock and Dam no. 26 - Alton, Illinois, John Joseph Livingston
The freezing temperatures of the system aniline-ortho toluidine, Ray W. Fahien
The freudenthal compactification of tree-like generalized continua, W. J. Charatonik, Tomás Fernández-Bayort, and Antonio Quintero
The functionalization of single wall carbon nanotubes for bioapplications, Pu Zhang
The function-failure design method, Robert B. Stone, Irem Y. Tumer, and Michael Van Wie
The further development of a cavitation test cell, David A. Summers and Marian Mazurkiewicz
The further refinement of large scale vehicle routing problems., Kay Ellen Marrow Leonard
The future of glass strength, Michael Greenman, Tom Huff, and Richard K. Brow
The future of mine ventilation in our hands, Stewart Gillies
The future renewable electric energy delivery and management (FREEDM) system: the energy internet, Alex Q. Huang, Jim P. Zheng, Steiner J. Dale, Mariesa Crow, and Gerald T. Heydt
The gas chromatographic properties of a modified, wide-pore silica gel, Walter A. Aue, Shubhender Kapila, and Klaus O. Gerhardt
The gas chromatographic separation of some chlorinated hydrocarbon insecticides from PCB and PCN matrices, Veluppillai Paramasigamani, Shubhender Kapila, and Walter A. Aue
The gas fields of North Webster Parish, Louisiana, Joseph Maple Wilson
The gender specific mediational pathways between parenting styles, neuroticism, pathological reasons for drinking, and alcohol-related problems in emerging adulthood, Julie Patock-Peckham and Antonio A. Morgan-Lopez
The general approximation theorem, Donald C. Wunsch and Alexander N. Gorban
The generalized three-dimensional assignment problem: a model and solution, Wayne Paul Bailey
The genesis of cellular precipitation in copper rich copper-indium alloys, Raymond Albert Fournelle
The geology and hydrogeology of the New Lead Belt, Missouri, Charles Scott Fletcher
The geology and microscopy of the Prewitt Copper Shale (Permian), Jackson County, Oklahoma, D. E. Gann
The geology and relationships between porosity, permeability and oil saturation in heavy oil sands of Vernon County, Missouri, Chi-Tien Lee
The geology of a complexly folded area on Crooked Creek, in Crawford County, Missouril, Victor Harmon Hughes
The geology of the Eldorado Mining District, Clark County, Nevada, Spenst M. Hansen
The geology of the Evening Star Tin Mine and surrounding region, San Bernardino County, California., David Fred Thompson
The geology of the interstate highway 244 and 44 exchange, Kirkwood, Missouri, John Neil Thomas
The geology of the searchlight mining district, Clark county, Nevada., John Stewart Bown
The geology of the Thayer area emphasizing the stratigraphy of the Cotter and the Jefferson City formations, William Jesse Hedden
The geology of the uranium-vanadium deposit of the Diamond No. 2 mine, near Gallup, New Mexico., Raymundo J. Chico
The geometry of map equations for trochoids, Sibel Pasali
The Gif paradox, Pericles Stavropoulos, Remle Çelenligil-Çetin, and Amy E. Tapper
The gold industry of China, Jerry C. Tien
The Goltra process of concentrating iron ores as developed at Waukon, Iowa, Ernest Wander
The Gradient-Jump method, Louis Dean Gentry
The Graves condition for incompressible finite elasticity, G. P. MacSithigh
The great landslides in the East- Maritza open-cast mines (Bulgaria_- a theoretical paradox in the engineering geology, Kiril Anguelov
The great landslides in the East- Maritza open-cast mines (Bulgaria_- a theoretical paradox in the engineering geology, Kiril Anguelov
The Great Salt Lake Causeway- a calculated risk revisited, James R. Lambrechts and Edward B. Kinner
The Gruss inequality on time scales, Thomas Matthews and Martin Bohner
The halogen and uranium content of sedimentary rocks, tektites, impact glasses, and obsidians, Victor J. Becker Jr.
The heat treatment of cast steel, Fred Grotts
The heterogeneous nucleation of ice on ion implanted silicon, William Henry Stinebaugh
The high resolution shallow seismic reflection method implemented in imaging shallow complex fault structures at Benton Hills and Dudley Ridge in southeast Missouri, Michael Ladd Shoemaker
The history and the development of the cyanide industry, Horace T. Mann
The history of technical communication instruction at Missouri University of Science and Technology: the evolution of a curriculum, Elizabeth Marie Roberson
The h-Laplace and q-Laplace transforms, Gusein Sh. Guseinov and Martin Bohner
The hodrick-prescott filter: a special case of penalized spline smoothing, Robert Paige and A. A. Trindade
The holding strength of crimps on tubes, Aydin Cansever
The homodyne interferometer and its use in finding the optical properties of graphite, Steven Randle Frey
The horse and the cart in Web-based instruction: prevalence and efficacy, Richard H. Hall, Fikret Erçal, and Steve Eugene Watkins
The Hurwitz zeta function as a convergent series, Roman Dwilewicz and Jan Minac
The hydrogenation of ethylene over lanthanum transition metal perovskites, Dennis Ray Anderson
The hydrogen ion concentration in the liquefaction of gelatin, Frederick William Shaw
The hydrolysis, adsorption, and dynamics of silane coupling agents on a silica surface, Wiriya Meesiri
The hygrothermal response and physical aging of polymer matrix textile composites, Natalie L. Dixon
The ideal gas and real gas heat capacity of sodium atoms, Louis Biolsi Jr.
The identification and a neural network based control for a backward maneuvering trailer truck, Robert S. Woodley
The identification and characterization of genomic bacterial DNA utilizing vibrational spectroscopy, Connie Marie Gryniewicz
The identification and characterization of phenylalanine ammonia-lyase gene family members in glycine max, Erin Kathleen Pringle
The identification and evaluation of toxic effects of organic micropollutants, John Warren Smith
The identification and processing of don't-care attribute values in ID3 decision tree construction, Philip Daniel Dorr
The impact of alcohol and drug use on employment: A labor market study using the national longitudinal survey of youth, Ananda Amarasekara Jayawardhana, V. A. Samaranayake, and Allen Wilhite
The impact of cultural and religious values on adoption of innovation, Angela Hausman and Morris Kalliny
The impact of cultural differences and religion on television advertising: A content analysis of the United States and the Arab world, Morris Kalliny, Grace Dagher, and Michael S. Minor
The impact of false alarm mitigation on surface landmine detection in MWIR imagery, R. Joe Stanley, Sanjeev Agarwal, and Satish Somanchi
The impact of firm disclosure quality on cross-listing choices, LiLi Eng and Q. Ling
The impact of fuel spray behavior on combustion stability in a spark ignition engine, Robert M. Wagner
The impact of learning styles using web-based asynchronous distance learning to enhance instruction by electrical engineering students, Marcus André Huggans
The impact of resource rent taxation on the Australian mining industry, Stewart Gillies
The impact of the Asian financial crisis on conservatism and timeliness of earnings: Evidence from Hong Kong, Malaysia, Singapore, and Thailand, Thanyaluk Vichitsarawong, LiLi Eng, and Gary K. Meek
The impact of the Islamic Law (Shari'a) on the economic development of Islamic countries: the case of the arab countries, Morris Kalliny
The impact of training and culture on leadership values and perceptions at the United States Army Engineer School, Ted Alan Thomas
The impact of web page text-background colour combinations on readability, retention, aesthetics, and behavioural intentions, Richard H. Hall and Patrick Hanna
The impacts of Internet traffic variability on modelling for large-scale broadband networks, Douglas K. Swift and Cihan H. Dagli
The impacts of MINER Act of 2006 on the U.S. mining industry, Jerry C. Tien
The imperfect structure of Ti-, Zr-, and Hf- nitrides containing an excess of nitrogen., Chester A. Faunce
The implementation of a compiler targeted to a multiprocessor environment, R. Dwight Schettler
The implementation of a rainwater catchment and storage project in a rural Philippine environment, Gary John White
The implementation of sulfur extended asphalt for the city of Portland, Oregon, Michael Alan Heitzman
The implementation of the Forth language on a RISC-type machine : the IMS T212 transputer, Feng-Gi Yang
The Implications of Long-term Performance Plans and Institutional Ownership for Firms' R&D Investments, LiLi Eng and M. Shackell
The Implicitly Restarted Arnoldi (IRA) method for eigenanalysis of large power systems, Xianyao Wang
The importance and influence of groundwater fluctuations in phytoremediation, Jeff A. Weishaar
The importance of radiation as a means of controlling surface and internal temperatures of a semi-infinite solid., Kenneth C. Woodruff
The importance of the Wigner-Seitz cell volume in determining the cobalt site occupancy in Nd₂(Fe,⁵⁷Co)₁₄B, Gary J. Long and Fernande Grandjean
The incorporation of oxygen-18 into oxindole acid by cells of Hygrophorous conicus, William Green Allen
The increasing acceptance of fly-in fly-out within the Australian mining industry, Stewart Gillies, Hsin Wei Wu, and S. J. Jones
The independence of characters on nonabelian groups, David E. Grow and Kathryn E. Hare
The indole acetic acid oxidase of hygrophorus conicus., Dilip N. Patel
The inert gas effect on the rate of evaporation of zinc and cadmium, Chu Sheng Wu
The influence of a carbon ablation layer on radiation from a hydrogen shock layer, Birbal Singh
The influence of additives and their interactions on copper electrorefining, Chwan-tsann Wang
The influence of a fixed failure plane on the direct shear test, Kenneth Hodges Bell
The influence of aluminum and carbon on the abrasion resistance of high manganese steels, Samuel August Buckholz
The influence of ammonia and carbon dioxide on the sorption of a basic organic pollutant to a mineral surface, Maneerat Ongwandee, Glenn Morrison, and S. S. Bettinger
The influence of ammonia and carbon dioxide on the sorption of basic (alkaline) organic pollutants onto indoor surfaces, Maneerat Ongwandee
The influence of bench geometry on blasting effects for vertical cylindrical charges., Thomas E. Pearse
The influence of bentonite-cement-water ratios and their mixing methods on the performance as annular-space sealants in ground-water monitoring wells, Kelly B. Leseman
The influence of both major and minor element composition on void swelling in austenitic steels, F. A. Garner and Arvind S. Kumar
The influence of CaCO 3 filler component on thermal decomposition process of PP/LDPE/DAP ternary blend, Fatih Dogan, Kamil Şirin, İsmet Kaya, and Mehmet Balcan
The influence of cartridge diameter on the effectiveness of dynamite, Charles Harding Noren
The influence of cation exchange and electrolyte concentrations upon the Atterberg limits, Kent J. Schwieger
The influence of chemical composition on the magnetic properties of Fe ₁.₅₋ₓCoₓRh₀.₅Mo₃N (0 ≤ x ≤ 1.5), Peter D. Battle, Fernande Grandjean, Gary J. Long, and Sophia Oldham
The influence of chemical interactions at the human surface on breathing zone levels of reactants and products, D. Rim, Atila Novoselac, and Glenn Morrison
The influence of current and past alcohol use on earnings: three approaches to estimation, Richard R. Bryant, V. A. Samanayake, and Allen Wilhite
The influence of estrogen on hepatobiliary osteopontin (SPP1) expression in a female rodent model of alcoholic steatohepatitis, Atrayee Banerjee, R. Rose, Greg A. Johnson, Robert C. Burghardt, and Shashi K. Ramaiah
The influence of explosive primer location on fragmentation and ground vibrations for bench blasts in dolomitic rock., Joseph Robert Brinkmann
The influence of extremely low oxygen partial pressures on the sessile drop contact angles and the interfacial energies and reactions of molten silicon on silicon carbide, silicon nitride, and aluminum nitride, P. D. Ownby, M. W. Barsoum, B. F. Yu, and Harold V. Romero
The influence of flight conditions on the field-incidence transmission loss of flat and curved panels., Harold M. Harder
The influence of grade strength on the efficiency of gelatin dynamite, Kenneth George Ackermann
The influence of graphics-based decision support systems and user cognitive skills on decision quality, Hulya Yazici
The influence of large prestrains on dynamic properties of sand, Shelton Leslie Stringer
The influence of local buckling on the structural behavior of singly-symmetric cold-formed steel columns, Gale P. Mulligan and Teoman Peköz
The influence of manganese oxide on sintering of a commercial natural magnesite., Alamar Kasan Duarte
The influence of materials and methods upon physical properties in the development of a glass-melting tank body, George Armour Sellers
The influence of member length on thermal contact resistance in a vacuum environment, Larry Martin Cooper
The influence of organic matter on shear strength of a cohesive soil, Kamran Rezvan
The influence of oxygen activity on sintering of strontium doped lanthanum chromite., Leslie Groupp
The influence of PCl 3 on planarisation and selectivity of InP regrowth by atmospheric pressure MOVPE, M. J. Harlow, P. C. Spurdens, and Randy Hays Moss
The influence of printed circuit board design on TEM cell measurements, Vijay Kasturi
The influence of pyrite on the oxidation of galena, William Newton Clark and Mark Stephen Mazany
The influence of several factors on the rate of secondary compression of soil, William Joel Green
The influence of silicon on void nucleation in irradiated alloys, B. Esmailzadeh, Arvind S. Kumar, and F. A. Garner
The influence of silt on the compressibility of an illitic clay, James Inman Spencer
The influence of solution-model complexity on phase diagram prediction, Mark E. Schlesinger and Joseph William Newkirk
The influence of specimen size on charpy impact testing of unirradiated HT9, B. Louden, W. Hu, Arvind S. Kumar, and F. A. Garner
The influence of specimen size on Charpy impact testing of unirradiated HT-9, Brian Scott Louden
The influence of specimen size on thermal or irradiation creep in pressurized tubes, F. A. Garner, M. L. Hamilton, R. J. Puigh, C. R. Eiholzer, D. R. Duncan, M. B. Toloczko, and Arvind S. Kumar
The influence of surface area-to-volume ratio on the quality control of high strength concrete, Ji Shen
The influence of temperature, carbon content, and preloading on secondary consolidation of a clay, Richard Kai-Ming So
The influence of temperature dependent properties of thermal rock fragmentation, T. F. Lehnhoff and James Dale Scheller
The influence of temperature, humidity and changing conditions on the measurement of mass transfer coefficients in indoor air, Glenn Morrison, Deborah J. Wiseman, and P. Zhao
The influence of test parameters on TEM cell measurements of ICs, Vijay Kasturi and Daryl G. Beetner
The influence of thin clay layers on the design-flexible cantilever, R. Cameron and C. A. Carr
The influence of U.S. macro economic factors on the international stock market, Jason Shin-Liang Yu
The influence of various blast casting designs on the percent cast and resulting economic benefits, Scott George Giltner
The influence of β-(Mg₁₇Al₁₂) phase distribution on corrosion behavior of AM50 alloy in NaCl solution, Surender Maddela, Yar-Ming Wang, Anil K. Sachdev, and R. Balasubramaniam
The influences of charge weight per delay, horizontal and vertical distances, charge diameter, and travel direction on surface ground vibration levels from blasting, Elmer Alberto Vidal
The informativeness of earnings after financial statement restatements, LiLi Eng, R. Rao, and Shakrokh Saudagaran
The initial evaluation of hot isostatically compacted boron nitride for electron devices, J. D. Weyand, D. C. Carmichael, W. C. Chard, P. D. Ownby, and H. W. Baker
The integrated planning method of project planning, development and implementation, Joseph Frank Lynch
The integration of artificial neural networks and geogrpahic information systems for engineering geological mapping, Gregory Lee Easson
The integration of object-oriented analysis and structured analysis based on structured decomposition, Hungwen Lin
The integration of simulation and reality for education enhancement and training, Clarence Rasquinha and Stephen A. Raper
The intelligent House of Quality, Ruoqian Jia
The interaction between baseball attendance and winning percentage: A VAR analysis, Michael Davis
The interaction mechanisms and effects on gamma radiation on biosilicone elastomers., Dean Bruce Jones
The interaction of shear diaphragms and diagonal bracing, Walter A. Jankowski and Donald Sherman
The interaction of system structure, index, and numerical stability in classes of differential/algebraic systems, Mariesa Crow
The interaction of urea with the generic class of poly(2-hydroxyethyl methacrylate) hydrogels, Leonard Pinchuk, Eugene C. Eckstein, and Michael R. Van-De-Mark
The interactions of amphiphiles with solvent molecules and small metal ions, Tony D. Flaim
The interfacial phenomena of liquid copper of sapphire substrates, Jenq Liu
The interfacial reactions between ferrosilicon inoculants and molten gray cast iron., Hsien-Lung Tsai
The internal layout of a warehouse using rack storage, Maitree Wasuntiwongse
The interplay of diffusional and electrophoretic transport mechanisms of charged solutes in the liquid film surrounding charged nonporous adsorbent particles employed in finite bath adsorption systems, Athanasios I. Liapis and Brian A. Grimes
The interpolating random spline cryptosystem and the chaotic-map public-key cryptosystem, Fengi Hwu
The interstate old fiddlers contest of 1926: WOS, rural radio audiences, and music making in the Missouri state capitol, Patrick Huber
The intrinsic strength and fatigue of oxide glasses, Charles R. Kurkjian, P. K. Gupta, Richard K. Brow, and Nathan P. Lower
The investigation of color image analysis techniques for detection of key features in medical images, Vrushali Mundhe
The investigation of color modification as a result of solid solution, Bobby Lee Mornin
The investigation of gravity-driven metal powder flow in coaxial nozzle for laser aided direct metal deposition process, Heng Pan, Todd E. Sparks, Yogesh D. Thakar, and Frank W. Liou
The investigation of the deleterious action of certain metals on the cyanide process for gold, Lamar Horacio Hunt and William Alexander Gardiner
The investigation of video sensitivity and data processing errors encountered in an airborne receiver, James Lee Hamilton
The in vitro study of metabolic effects of D- and L- forms of amino acids on tumor cell growth, Xiang Luo
The iron-holmium binary system and related magnetic properties, Gerald J. Roe
The iron-iron carbide phase diagram: A practical guide to some descriptive solid state chemistry, Gary J. Long and Hollis P. Leighly
The justification for and design of a lunar radio observatory., Thomas Van Doren
The Kalman filter on time scales, Nicholas J. Wintz
The karst hydrology of Boiling Spring Pulaski County, Missouri, James Edward Kaufmann
The Kerr Electro-Optic effect in plastic materials transmitting infra-red radiation, James Edson Dueker
The kinetic and economic effects of separating the stages of the anaerobic digestion process, Edgar Clemens Clausen
The kinetics and mechanisms of the alcoholysis and hydrolysis of alkoxysilanes, David J. Oostendorp
The kinetics and mechanisms of the reaction of benzyl chloride with potassium t̲-butoxide in t̲-butyl alcohol, Der-Rong Chen
The kinetics of anaerobic digestion., Michael James Hanshaw
The kinetics of CO formation during coupled reactions involved in the refining of steel-understanding G (CO), D. G. C. Robertson
The kinetics of gas-liquid metal reactions involving levitated drops, Nagy El-Kaddah and D. G. C. Robertson
The kinetics of Tert-Butyl-Peroxy-Acetate initiated polymerization of 1,1-difluoroethene in a supercritical carbon dioxide medium, Jonathan E. Wenzel, Jared Bouquet, H. Bryan Lanterman, and Sunggyu Lee
The kinetics of the reaction of m-nitrobenzyl bromide with hydroxide ion in aqueous-aprotic solvent mixtures, Ramesh Nagindas Sheth
The Laplace transform on isolated time scales, Martin Bohner and Gusein Sh. Guseinov
The Latouche mining method as used at the Alaska Juneau Gold Mine, Willard Alexander Gallemore
The lattice constant and coefficient of expansion of chromium., Chao-Ching Weng
The lattice constants of chromium and vanadium containing dissolved gases., Paluri Bhimeswara Rao
The leaching behavior of arsenic, selenium and other trace elements in coal fly ash, Tian Wang
The leaching characteristics of Selenium from coal fly ashes, Tian Wang, Jianmin Wang, H. Ban, Ken Ladwig, and Joel Gerard Burken
The lead and zinc deposits in the sedimentary rocks of East Tennessee and Southwest Virginia, Joseph Hugh Reid
The lelek fan is unique, W. J. Charatonik
The life cycle of continental rifting as a focus for U.S.-African scientific collaboration, Mohamed G. Abdel Salam, Estella A. Atekwana, S. L. Klemperer, and G. R. Keller
The lifetime and effective quenching cross section of the 6²P₃/₂ state of thallium, Robert Charles Pickett
The light ion LMF and its relevance to IFE, Ronald E. Olson, G. O. Allshouse, D. L. Cook, T. R. Lockner, M. G. Mazarakis, C. L. Olson, and D. L. Smith
The light ion pulsed power induction accelerator for ETF, Ronald E. Olson, M. G. Mazarakis, C. L. Olson, D. L. Smith, and L. F. Bennett
The light-ion pulsed power induction accelerator for the Laboratory Microfusion Facility (LMF), Ronald E. Olson, J. Boyes, M. G. Mazarakis, D. L. Smith, L. F. Bennett, T. R. Lockner, and J. W. Poukey
The lignite coal of North Dakota, Clyde McKeever Laizure and James Knight Christopher
The limitations and dynamics imposed on multicomponent batch distillation by tray hydraulics, Keith George Tomazi
The linear new city -- A pattern for new cities based on efficiency of transportation, public services, and land use, Elbridge Wesley Bartley III
The lithium shell effect and it's impact on microscopy determinations of swelling behavior, W. J. S. Yang, F. A. Garner, and Arvind S. Kumar
The lithium tungsten bronzes, Shun Sheng Hsu
The LMF triaxial MITL voltage adder system, Ronald E. Olson, M. G. Mazarakis, D. L. Smith, L. F. Bennett, T. R. Lockner, and J. W. Poukey
The local instability of thin-walled sections under combined compression and bending, J. Rhodes and James M. Harvey
The location, construction, and maintenance of the Rabbit Ears Pass Forest Highway, Julian Greenway Huckins
The location of underground points by means of a magnetic dipole., Anthony DelPrete
The logarithm on time scales, Martin Bohner
The Los Angeles Region seismic experiment - Passive and active phases, H. Liu, M. Benthien, J. Norris, Stephen S. Gao, J. Murphy, T. Brocher, K. Hafner, C. Contopoulos, C. Scrivner, M. Robertson, H. Ekstrom, J. Bhowmik, P. M. Davis, G. S. Fuis, R. W. Clayton, and T. L. Henyey
The losses of gold during cupellation using various makes of cupels, Benjamin Harrison Dosenbach
The low-temperature sintering behavior of (La,Ca)CrO₃, John David Carter
The low-temperature specific heats of Y₂(Co₁₋ₓAlₓ)₁₇ alloys, L. M. Godwin, H. W. White, and William Joseph James
The Lund Ash-flow Tuff, John Evans Kreider
The magnetic and electronic structures of several rare earth-transition metal intermetallic compounds, Chiu-Ying Tai
The magnetic monopole., Thomas E. Kemple
The magnetic structures of LaCr₁₋ₓMnₓO₃ with X = 0 to 0.5, Chiu-Ying Tai
The magnitude and directions of strains and stresses in edge loaded concrete slabs., William Marshall Baldwin
The magnitude of diesel particulate matter in underground mine workings: advances in real-time monitoring, Stewart Gillies
The making of the future, Leslie S. Gertsch
The malonic ester synthesis with styrene oxide and with butadiene oxide, Robert R. Russell and Calvin Anthony VanderWerf
The management of change: a case study, Stephen A. Raper and Richard Neal Callahan
The management of change in manufacturing : a case study, Richard Neal Callahan
The management of China's gold mines, J. Weidong and Jerry C. Tien
The management of mobile loading units in mines working in number V and VI seams of Illinois and Indiana, Kirk Vern Cammack
The management of replicated data, Hsueh-Chi Shih
The management saturation point, Susan M. Miller
The manufacture of airtight leather gaskets, W. Kedzie Teller
The manufacture of cement in the state of California, William Alonzo McCanless
The manufacture of coal gas in St. Louis, Albert Dyke Wilson
The manufacture of liquid oxygen and its use as an explosive, Francis Kinlock Middleton Hunter
The manufacture of Portland cement, Herman C. Cowen
The manufacture of sulphuric acid by the chamber process at Isabella, Tennessee, Albert Leo Trent
The manufacturing engineer restructured as an intracorporate entrepreneur, David Lawrence Fritsche
The manufacturing process of curved foam core composites, Leilani Jacintha Spurlock
The marketing value of graduate certificate programs in higher education: a strategic assessment, Susmitha Akula
The massive collapse of coal pillars - Case histories from the United States, F. E. Chase, R. Karl Zipf, and C. Mark
The matrix pencil for power system modal extraction, A. Singh and Mariesa Crow
The maximum flow algorithm applied to the placement and distributed steady-state control of UPFCs, Austin Armbruster, Bruce M. McMillin, Mariesa Crow, and Michael R. Gosnell
The maximum resource allocation for uncertainty reduction in a decision-analytic concept selection, Shun Takai and K. Ishii
The MCS/MFNN algorithm for open pit optimization, Samuel Frimpong and P. K. Achireko
The measurement of airflow through regulators, Stewart Gillies, Timothy I. Mayes, and Hsin Wei Wu
The measurement of compressed air and its consumption in rock drills, Homer Kent Sherry and William Porri
The measurement of explosively induced stresses in rock-like materials with a capacitive transducer, Vincent Paul Crane
The measurement of mineral electrode potentials, John Charavelle Ingram
The measurement of the life-time of the 6²P₃/₂., Danny Hale Sokolowski
The measurement of the quantity of water delivered by Meramec Spring, James K. Black and John Owen Ambler
The mechanical anchorage value of the transverse wires in Welded Wire Reinforcement Fabric, Ernst August Weinel
The mechanical properties of germanium, Zheng Yang
The mechanical properties of mine rocks and a standardized test procedure for their determination, Walter Edwin Lewis
The mechanical properties of the Bonneterre Formation dolostone according to carbonate facies and moisture conditions, Sweetwater Mine, Viburnum Trend, southeast Missouri, Harvey Edwin Goodman
The mechanical properties of tightly woven carbon-carbon composites, Abdullah Ozturk
The mechanics of biological materials, Rajiv S. Mishra
The mechanics of fine fragment formation in coal, R. Karl Zipf
The mechanism of array geometry in the control of AE/MS source location accuracy, Mao Chen Ge and H. R. Hardy Jr.
The mechanism of array in the control of AE/ME source location accuracy. Key questions in rock mechanics, Mao Chen Ge and H. R. Hardy Jr.
The mechanism of elevated toxicity in HepG2 cells due to combined exposure to ethanol and ionizing radiation, Joshua Ogony, Richard H. Mathews, H. Anni, Katie Shannon, and Nuran Ercal
The mechanism of fluorination IV, William T. Miller Jr., James O. Stoffer, G. Fuller, and A. C. Currie
The mechanism of sheat formation by plunging jets, D. G. C. Robertson, D. P. O'Shaughnessy, and N. A. Molloy
The mechanisms of mold filling and casting defect formation in the lost foam casting process, Xiaojun Liu
The metallurgic treatment of an ore, Walter W. Wishon
The metallurgic treatment of an ore for gold, silver, lead, and copper, William M. Claypool
The metallurgic treatment of an ore for lead and silver, Arthur C. Carson
The metallurgic treatment of lead ores as carried on in south-west Missouri, Frank W. Gibb
The metallurgic treatment of the iron ores of southwest Missouri, Beauregard Ross
The method of auxiliary sources as an efficient numerical technique for large 3D semi open structures, R. S. Zaridze, D. G. Kakulia, K. N. Tavzarashvili, David Pommerenke, G. N. Ghvedashvili, and Kai Xiao
The method of mining and milling at the Rosiclare Lead and Fluor Spar Mines, Arthur Harrison Cronk
The Mexican oil fields, Raul Chavez
The microbial hydrolysis of cellulose and some factors affecting the production of cellulase in a submerged culture of Alternaria sp, Robert Murray Logan
The microstructure effecton the electrical and optical properties of undoped and Sr-doped SmCoO₃ thin films, Toshio Suzuki, Piotr Z. Jasinski, Vladimir Petrovsky, Fatih Dogan, and Harlan U. Anderson
The microstructure of drill steel, Arthur L. Pollard
The microstructure of some commercial nickel steels, Robert Newton Stubbs
The microstructures of rapidly solidified hyper-eutectic AlBe alloys, David C. Van Aken and H. L. Fraser
The Middle Ordovician section in east central Missouri, Morris James Ingerson and Josiah Bridge
The mineral association in manganese ores, with particular reference to the phosphorus-bearing minerals and their removal by leaching methods, Daniel Chalmers McLean
The mineralogy of slags from a secondary copper refinery, Sarah Beutner Mavrogenes, Richard D. Hagni, and D. G. C. Robertson
The mineralogy of the Grassy Creek and Saverton formations., Dirk Pieter Van Duym
The mineralogy, petrology and rare earth element geochemistry of the Maw Zone, Athabasca Basin, Canada, Adrienne Joyce Hanly
The mining challenge of handling coal seam hydrogen sulphide, Stewart Gillies, Mehmet S. Kizil, Hsin Wei Wu, and Timothy J. M. Harvey
The mining & construction of a smelter for the production of zinc-white from western lead-zinc ores, Hector George Sylvester Anderson and V. B. Hinsch
The mio-eugeosynclinal thrust interface and related petroleum implications in the Sason-Baykan Area, Southeast Turkey, Ismail Özkaya
The mitigation effects of a barrier wall on blast wave pressures, Nathan Thomas Rouse
The Mn-Se (Manganese-Selenium) system, Mark E. Schlesinger
The Mn-Te (Manganese-Tellurium) system, Mark E. Schlesinger
The Mn-Zr (Manganese-Zirconium) system, Mark E. Schlesinger
The mobility spectra of positive ion hydrates in a mixture of argon and water vapor, Robert Ellis Thurman
The modeling and analysis of multi-component, multivalent biospecific adsorption, Bo Henrik Arve
The modeling and control of freeze dryers, Martin James Millman
The modeling, fabrication, and testing of an instantaneous torque measuring system, Thomas Phillip Hertel
The modeling of a commercial fluidized bed reactor with particle growth from a surface reaction, Jinhoon Choi
The modelling and analysis of adsorption and elution stages of perfusion chromatographic systems, Yihui Xu
The modelling, dynamic behavior, and analysis of affinity and perfusion chromatography systems, Mark Alan McCoy
The modelling of the occurrence of hydrogen sulphide in coal seams, Stewart Gillies, Mehmet S. Kizil, Hsin Wei Wu, and Timothy J. M. Harvey
The modern origins of an old-time sounds: Southern millhands and their hillbilly music, 1923-1942, Patrick Huber
The [MoFe₆S₆(CO)₁₆]²⁻ ion: A new model for the FeMo-cofactor of nitrogenase, Patricia A. Eldredge, Robert F. Bryan, Ekkehard Sinn, and Bruce A. Averill
The MorphologyNet viewer: a tool for the visualization and analysis of 3D anatomical structures, Thomas Hoeft
The morphology of aerosols produced by the condensation of sodium chloride vapor., Yu-Tzun Chen
The morphology of cellular precipitation in aluminum rich aluminum-silver alloys, Santiago Ibarra Jr.
The morphology of cellular precipitation in magnesium rich magnesium-aluminum alloys, Jyong Shi Cho
The morphology of the cellular precipitation reaction in a Pb-3.0 wt% Sn alloy, Federico Sequeda Osorio
The Mössbauer effect in bismuth ferrate, Bruce A. Banks
The multirate method for simulation of power system dynamics, J. G. Chen and Mariesa Crow
The multi-rate method simulation for DCZEDS, Wenbin Li
The multirate simulation of FACTS devices in power system dynamics, J. G. Chen and Mariesa Crow
The multirate simulation of FACTS devices in power system dynamics, J. G. Chen and Mariesa Crow
The nature of molecular films of oleic acid on quartz, Kenneth Lee Keating
The nature of the reactions occurring in the distillation of zinc from its ores and the effect on the speed of these reactions due to certain variables, Robert Glenn Sickly and Charles Yancey Clayton
The Nb-Si (Niobium-Silicon) system, Mark E. Schlesinger, H. Okamoto, A. B. Gokhale, and R. Abbaschian
The need for determining the bioavailability of quartz in coal mine dust samples, L. L. Probert and R. Larry Grayson
The need for quantifying waterjetted surface texture for FRP adhesion, Norbert H. Maerz, David A. Summers, Greg Galecki, and Antonio Nanni
The need to measure low-energy antineutrinos (E⊻<0.782 MeV) from the sun, Oliver Manuel
The negative motivational effects of the forced distribution of performance ratings and merit raises, William Howard Kinney
The neon alphabet game., Dwarka D. Sabu and Oliver Manuel
The new-but is it improved?-power system [deregulation issues], Mariesa Crow
The new centurions, Lynn K. Stichnote and Mariesa Crow
The new european recommendations for the design of light gauge steel members, Per O. Thomasson
The next linear collider test accelerator, C. Adolphsen, K. Bane, D. L. Burke, R. Calin, G. Caryotakis, R. Cassel, Stephen L. Clark, H. Deruyter, K. Fant, R. Fuller, S. Heifets, H. Hoag, R. Humphrey, S. Kheifets, R. Koontz, N. M. Kroll, R. T. Lavine, G. A. Loew, A. Menegat, C. Nantista, C. Pearson, R. Phillips, J. Rifkin, J. Spencer, S. Tantawi, A. Vlieks, V. Vylet, A. Yeremian, B. Youngman, R. D. Ruth, R. F. Boyce, R. H. Miller, J. M. Paterson, K. A. Thompson, J. W. Wang, and P. B. Wilson
The noble gas geochemistry of Kuroko deposits and some barites, Bin Li
The noble gas record of terrestrial and meteoritic samples, Edward W. Hennecke
The nonlinear optical, magnetic, and Mössbauer spectral properties of some iron(III) doped silica xerogels, V. Rosso, Y. Renotte, Y. Lion, Fernande Grandjean, Jean-Paul Pirard, J. Delwiche, Gary J. Long, Leïla Rebbouh, Benoît Heinrichs, and M. J. Hubin-Franskin
The north side sewage treatment works of the Chicago Sanitary District, Floyd Allen Gerard
The n-Silicon/Thallium(III) Oxide Heterojunction Photoelectrochemical Solar Cell, Jay A. Switzer
The Nubian swell, Mohamed G. Abdel Salam, E. Hinz, A. K. Thurmond, Robert J. Stern, K. C. Nielsen, and M. M. Abdeen
The nucleation of Co bubbles in molten ironcarbon drops reacting with oxidizing gases, Nagy El-Kaddah and D. G. C. Robertson
The number of analytic solutions of a singular differential system, Leon M. Hall
The numerical determination of nominal libration point trajectories and development of a station-keeping strategy, Henry Pernicka
The Numerical simulation and analysis of a large-scale scramjet combustor, Jarrod Brett Hoecker
The numerical simulation of supersonic mixing and combusting flowfields : a validation study, Paul Hadley Vitt
The numerical solution of two-dimensional fluid flow problems, E. David Spong
The N-wire exponential transmission line, Vernon Ray Stanley
The observed seismic behavior of the Matahina Dam, M. D. Gillon
The occurrence of oil and gas in Osage County, Oklahoma, Donald Hewson Radcliffe
The oil industry of the Coalinga field, A. Emory Wishon
The one- and multi-sample problem for functional data with application to projective shape analysis, Axel Munk, Robert Paige, J. Pang, Vic Patrangenaru, and Frits H. Ruymgaart
The opium debate and Chinese exclusion laws in the nineteenth-century American West, Diana L. Ahmad
The optical properties and band gap energy of nanocrystalline La₀.₄Sr₀.₆TiO₃ thin films, Toshio Suzuki, Piotr Z. Jasinski, Vladimir Petrovsky, and Harlan U. Anderson
The optical properties of liquids, metals, and minerals in the far-infrared, Lawrence Allen Newquist
The optical properties of solids in the far infrared and submillimeter regions, Mark Allen Ordal
The optimal trajectory modelling of robot manipulators, Mary Claire Miller
The optimization of ethane/ethylene distillation, Hazem Haddad
The Ore Knob copper process, Oscar Lachmund
Theoretical analysis of shape separation of particles using flow field-flow fractionation, Mehrdad Alfi
Theoretical and experimental analysis of cantilever folded plate, K. Chandrashekhara and D. P. Singh
Theoretical and experimental investigation of a viscous ring nutation damper., Roy Alexander Campbell III
Theoretical and experimental investigation of framed structure-layered soil interaction problems, K. Chandrashekhara and S. J. Antony
Theoretical and experimental investigation of oil recovery by the electrothermic technique, Samy Abdel-Hakeem El-Feky
Theoretical and experimental spectroscopy of the S₂ sState of CHF and CDF: dynamically weighted multireference configuration interaction calculations for high-lying electronic states, Richard Dawes, Ahren W. Jasper, Chong Tao, Craig Richmond, Calvin Mukarakate, Scott H. Kable, and Scott A. Reid
Theoretical and experimental studies of photorefractivity in novel polymeric composites, Bogdan Swedek, Paras N. Prasad, Yiping Cui, Ning Cheng, Jaroslaw W. Zieba, Jeffrey G. Winiarz, and Kie-Soo Kim
Theoretical and experimental studies of Sb₄O₆, rhombohedral P₄O₁₀, and crystalline cubic As₄O₆: vibrational analysis, infrared, and Raman spectra, Sean James Gilliam
Theoretical and experimental studies on hybrid control of seismic structures, Franklin Y. Cheng, Peter Tian, V. Rao, K. Martin, Frank W. Liou, and Jung-Hua Yeh
Theoretical and laboratory studies on injection phenomena, S. Ohguchi, Brahma Deo, and D. G. C. Robertson
Theoretical and physical evaluations of steel shear diaphragms, Hsin-Tien Huang and Larry D. Luttrell
Theoretical calculation of fully differential cross sections for electron-impact ionization of hydrogen molecules, Junfang Gao, Don H. Madison, and Jerry Peacher
Theoretical calculation of the low-density transport properties of monatomic silver vapor, Louis Biolsi Jr. and Paul M. Holland
Theoretical calculation of the transport properties of monatomic lithium vapor, Paul M. Holland, Louis Biolsi Jr., and James C. Rainwater
Theoretical description of two- and three-particle interactions in single ionization of helium by ion impact, M. F. Ciappina, W. R. Cravero, Michael Schulz, R. Moshammer, and J. Ullrich
Theoretical evaluation of magnetization behavior in PRESS: For determination of the spin-lattice relaxation time, T1, S.-K. Kang, B.-Y. Choe, T.-S. Suh, and Hyoung-Koo Lee
Theoretical foundation for the operation of liquid-filled anti-G suit in aviation, Xavier J. R. Avula
Theoretical investigation of steam jet cleaning., Jaswant Tulsidas Lotwala
Theoretical investigation of superelectrophilic fluorooxonium dications FOH₃2+ and F₂OH₃2+ ; comparison with parent H₄O₂+ dications, Prakash Reddy, Ekkehard Sinn, George Andrew Olah, G. K. Surya Prakash, and Golam Rasul
Theoretical model for the analysis of a ceramic thin film sintering on a non-sintering substrate, Y. Zhao and Lokeswarappa R. Dharani
Theoretical prediction of plasma protein structures by Debye-sphere modeling of neutron scattering curves, Raghavender Rao Pillutla
Theoretical predictions of morphotropic phase boundary in (1-x)Na[subscript 1/2]Bi[subscript 1/2]TiO₃-xBaTiO₃ by first-principle calculations, Y. Deng, R.-Z. Wang, L.-C. Xu, H. Fang, Xiaodong Yang, H. Yan, and P. K. Chu
Theoretical studies of direct and resonant reactive scattering involving three-body systems, Chen Kwee Lutrus
Theoretical studies of few-body problems, Uttam Chowdhury