Modeling and Optimization of Chemical Reagents to Improve Copper Flotation Performance using Response Surface Methodology

Abstract

In this paper, the main and interaction effects of chemical reagent (collector and frother) dosages on the copper flotation performance using response surface methodology in design expert software were examined and the optimized dosage of reagents were specified. Then, in order to increase copper grade and recovery at industrial rougher flotation cells of the Miduk copper concentrator, Iran, distribution patterns of chemical reagents in suggested optimum conditions were investigated. A central composite design with three levels and five variables was employed to model and optimize the laboratory batch scale flotation process. The effect of dosages of Z11 (0–10 g/t), Flomin C4132 (14–34 g/t), A3477 (5–15 g/t) as collectors, AF65 (5–15 g/t) and MIBC (4–12 g/t) as frothers was studied. Forty-eight batch rougher flotation experiments (pH 11.5) for Miduk porphyry copper ore consisting of 0.9% Cu were conducted at different conditions using a bench scale Denver flotation cell with 3 L capacity. Second order response functions were generated for both the Cu grade and recovery models, as metallurgical indicators. These model equations were optimized using quadratic programming so as to maximize Cu grade and recovery within the experimental range studied. The main effect of all reagents dosages and the interaction of the Z11-Flomin C4132, Z11-A3477, and A3477-MIBC dosages had a significant impact on both recovery and grade. The optimum reagents dosages were found to be 5 g/t Z11, 34 g/t C4132, 5 g/t A3477, 15 g/t AF65, and 8 g/t MIBC. Maximum recovery of 91.4% and grade 8.13 were achieved under optimal conditions. Additionally, verification experiments at optimum conditions proposed by the models were carried out to specify the validity and adequacy of the predicted models. Based on the industrial rougher circuit tests results, distribution patterns of 75%-0%-25% and 50%-25%-25% were selected as the best distributions of collectors and frothers in mentioned conditions, respectively. The copper recovery and grade improved about 2% and 1.8%, respectively, via the use of optimized stage addition of reagents.

Department(s)

Mining Engineering

Keywords and Phrases

Central composite design; chemical reagents; copper flotation; grade; optimization; recovery

International Standard Serial Number (ISSN)

1556-7230; 1556-7036

Document Type

Article - Journal

Document Version

Citation

File Type

text

Language(s)

English

Rights

© 2024 Taylor and Francis Group; Taylor and Francis, All rights reserved.

Publication Date

02 Jul 2020

Link to Full Text

Share

 
COinS