Abstract

Filamentary volume dielectric barrier discharge (DBD) produces patterned plasma structures that are currently being explored for reconfigurable metamaterial applications. Previous work has demonstrated control of the presence and intensity of a single DBD plasma filament (within an array of filaments) by biasing a low voltage needle electrode. The results were attributed to redistributed charge inside the DBD due to the modified electric field created by the needle electrode. In the present work, results from a 3D electrodynamic field simulation bolster this argument. Results show that increasing needle bias voltage causes changes in the transverse electric field structure, resulting in redistribution and build-up of surface charge at the needle location. This reduces the needle plasma filament intensity and eventually extinguishes the filament. Specifically, extinguishment of the filament corresponds with the following transitions in the field profile: (1) the applied longitudinal electric field profile along the needle lies below that of the adjacent mesh filament; (2) the surface charge on the dielectric at the needle and adjacent mesh locations is equal; and (3) the transverse electric field reverses direction and forces charge toward the needle location. The calculated surface charge on the dielectric barrier agrees with experimentally measured filament light intensity to within 8%, in agreement with theoretical predictions. Analysis of the data and trends suggests a method for predicting filament pattern formation and reducing the necessary voltage bias.

Department(s)

Mechanical and Aerospace Engineering

Publication Status

Available Access

International Standard Serial Number (ISSN)

1089-7674; 1070-664X

Document Type

Article - Journal

Document Version

Final Version

File Type

text

Language(s)

English

Rights

© 2024 American Institute of Physics, All rights reserved.

Publication Date

01 May 2017

Download

Full Text Link

Share

 
COinS