Abstract
Three Commercial CNC Counters (TSI Models 3010, 3022A, and 3025A) Are Compared with an Alternating Temperature Gradient Cloud Chamber (ALGR). Electrically Size Classified Aerosols of Sodium Chloride and Silver Are Used. Diffusional Losses within the ALGR Are Much Larger Than for the TSI Instruments: Therefore the ALGR Concentrations Are Corrected for Internal Diffusional Losses, But the TSI Instruments Are Not. the Particle Size Range Tested is 4–90 Nm. for Sodium Chloride, the TSI Concentrations Agreed Fairly Well with the Corrected ALGR at Larger Sizes, and Were Below the Corrected ALGR at Smaller Sizes. the Electrical Aerosol Classifier (EAC) Setting at Which a Particular TSI Instrument Concentration is 50% of the Corrected ALGR Concentration is Denoted D 50%. for the 3010 and 3022A, the Values of D 50% Are 14.5 and 7.9 Nm, Respectively. for the 3025A the Extrapolated D 50% is 3.5 Nm. These D 50% Values Are Close to Those Reported for Comparisons between Concentrations Measured by the TSI Instruments and Concentrations Determined with an Aerosol Electrometer. However, the Count Ratio Rises to Unity Less Quickly as Size Increases for the Present Intercomparisons as Compared with Intercomparisons with Aerosol Electrometers. the ALGR Can Produce at Most a 30% Water Super-Saturation, Corresponding to a Kelvin Diameter of 8.4 Nm. Thus, Since Silver Particles Are Water Insoluble, the ALGR Detected Small Silver Particles Less Efficiently Than the TSI Model 3025A. the Data with Silver Aerosols Allowed Determination of the Relation between Size and Critical Supersaturation over the Size Range 16–30 Nm Diameter. the Silver Aerosol Exhibited Critical Supersaturations Higher, by a Factor of 1.2 to 1.8, Than Those Given by the Kelvin Equation. © 1995 American Association for Aerosol Research Published by Elsevier Science Inc.
Recommended Citation
D. J. Alofs et al., "Intercomparison between Commercial Condensation Nucleus Counters and an Alternating Temperature Gradient Cloud Chamber," Aerosol Science and Technology, vol. 23, no. 2, pp. 239 - 249, Taylor and Francis Group; Taylor and Francis, Jan 1995.
The definitive version is available at https://doi.org/10.1080/02786829508965307
Department(s)
Mechanical and Aerospace Engineering
Second Department
Physics
International Standard Serial Number (ISSN)
1521-7388; 0278-6826
Document Type
Article - Journal
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2023 Taylor and Francis Group; Taylor and Francis, All rights reserved.
Publication Date
01 Jan 1995
