Abstract
An electrolyte supported single chamber solid oxide fuel cell (SOFC) module consisting of two cells has been proposed. The module consists of one Sm-doped CeO2 (SDC) electrolyte substrate (0.5 mm thick with the size of 5 3 10 mm), two Ni-SDC anodes on one side, and two SDC-(La,Sr)(Co,Fe)O3 cathodes on the other side. Two modules with different electrode areas were prepared and tested using an air-propane mixture. The electrode area had a strong influence on the performance of the module. It was shown that the two-cell module generated 1.5 V open-circuit voltage and about 17 mW maximum power at 550°C
Recommended Citation
T. Suzuki et al., "Single Chamber Electrolyte Supported SOFC Module," Electrochemical and Solid State Letters, vol. 7, no. 11, pp. A391 - A393, The Electrochemical Society, Inc., Nov 2004.
The definitive version is available at https://doi.org/10.1149/1.1799952
Department(s)
Materials Science and Engineering
Document Type
Article - Journal
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2026 IOP Publishing, All rights reserved
Publication Date
2004-11-01
