Abstract
High entropy dual phase (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B2 ultra-high temperature ceramics were produced from powders synthesized by boro-carbothermal reduction. Systematic additions of 2.5 wt%, 5 wt%, and 10 wt% WC were incorporated after powder synthesis. Additions of 2.5 wt% and 5 wt% WC dissolved into the host ceramics, resulting in complete solid solution formation and nearly full densification. In contrast, a secondary monoboride phase evolved for the composition with 10 wt% WC, in addition to the main high entropy carbide and diboride phases. Thermodynamic analysis revealed that WB formation was favorable for WC additions in the presence of metal diborides at the sintering conditions. Characterization by x-ray diffraction, electron backscatter diffraction, and transmission electron microscopy revealed that the secondary phase had an orthorhombic crystal structure while compositional analysis by energy dispersive spectroscopy showed that the monoboride phase was predominately tungsten but also contained other metals.
Recommended Citation
R. Hassan et al., "Effects of WC Additions on the Phase Formation of (Hf,Nb,Ta,Ti,Zr)C-(Hf,Nb,Ta,Ti,Zr)B2 High Entropy Dual Phase Ceramics," Journal of the European Ceramic Society, vol. 45, no. 15, article no. 117630, Elsevier, Dec 2025.
The definitive version is available at https://doi.org/10.1016/j.jeurceramsoc.2025.117630
Department(s)
Materials Science and Engineering
Publication Status
Full Text Access
Keywords and Phrases
Boro-carbothermal reduction; High entropy dual phase ceramics; Monoboride phase formation; Spark plasma sintering
International Standard Serial Number (ISSN)
1873-619X; 0955-2219
Document Type
Article - Journal
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2025 Elsevier, All rights reserved.
Publication Date
01 Dec 2025
Comments
Materials Research Science and Engineering Center, Northwestern University, Grant N00014–21–1–2515