Robotic Deposition and in Vitro Characterization of 3D Gelatin-bioactive Glass Hybrid Scaffolds for Biomedical Applications
Editor(s)
Anderson, James M.
Abstract
The development of inorganic-organic hybrid scaffolds with controllable degradation and bioactive properties is receiving considerable interest for bone and tissue regeneration. the objective of this study was to create hybrid scaffolds of gelatin and bioactive glass (BG) with a controlled, three-dimensional (3D) architecture by a combined sol-gel and robotic deposition (robocasting) method and evaluate their mechanical response, bioactivity, and response to cells in vitro. Inks for robotic deposition of the scaffolds were prepared by dissolving gelatin in a sol-gel precursor solution of the bioactive glass (70SiO2 -25CaO-5P2 O5 ; mol%) and aging the solution to form a gel with the requisite viscosity. after drying and crosslinking, the gelatin-BG scaffolds, with a grid-like architecture (filament diameter ∼350 µm; pore width ∼550 µm), showed an elasto-plastic response, with a compressive strength of 5.1 ± 0.6 MPa, in the range of values for human trabecular bone (2-12 MPa). when immersed in phosphate-buffered saline, the crosslinked scaffolds rapidly absorbed water (∼440% of its dry weight after 2 h) and showed an elastic response at deformations up to ∼60%. Immersion of the scaffolds in a simulated body fluid resulted in the formation of a hydroxyapatite-like surface layer within 5 days, indicating their bioactivity in vitro. the scaffolds supported the proliferation, alkaline phosphatase activity, and mineralization of osteogenic MC3T3-E1 cells in vitro, showing their biocompatibility. Altogether, the results indicate that these gelatin-BG hybrid scaffolds with a controlled, 3D architecture of inter-connected pores have potential for use as implants for bone regeneration.
Recommended Citation
C. Gao et al., "Robotic Deposition and in Vitro Characterization of 3D Gelatin-bioactive Glass Hybrid Scaffolds for Biomedical Applications," Journal of Biomedical Materials Research Part A, Wiley-Blackwell, Jan 2013.
The definitive version is available at https://doi.org/10.1002/jbm.a.34496
Department(s)
Materials Science and Engineering
International Standard Serial Number (ISSN)
1549-3296; 1552-4965
Document Type
Article - Journal
Document Version
Citation
File Type
text
Language(s)
English
Rights
© 2013 Wiley-Blackwell, All rights reserved.
Publication Date
01 Jan 2013