Magnetic properties of ceramic ferrites developed for use in fractional horse power a.c. motors

Author

Ram Saran Bhatia

Abstract

"The ceramic material produced in the Ceramic Engineering Department of the University of Missouri-Rolla has been tested to determine its magnetic properties. First the B-H characteristic, Q-factor and initial permeability were measured at different frequencies and the relative-loss factor was determined from the above results. The samples prepared were in the shape of toroids of approximately 8.0 cm of mean length and were wound with standard insulated number 38 wire. The soft ferrite material was produced to determine whether or not it could be used in the design of fractional H.P. a.c. motors"--Abstract, page ii.

Advisor(s)

Morgan, J. Derald

Committee Member(s)

Marshall, S. V., 1927-1999
Ownby, P. D.

Department(s)

Electrical and Computer Engineering

Degree Name

M.S. in Electrical Engineering

Publisher

University of Missouri--Rolla

Publication Date

1971

Pagination

viii, 59 pages

Note about bibliography

Includes bibliographical references (pages 27-28).

Rights

© 1971 Ram Saran Bhatia, All rights reserved.

Document Type

Thesis - Open Access

File Type

text

Language

English

Subject Headings

Ferrites (Magnetic materials)Magnetic materialsHorsepower

Thesis Number

T 2545

Print OCLC #

6033723

Electronic OCLC #

871700013

Recommended Citation

Bhatia, Ram Saran, "Magnetic properties of ceramic ferrites developed for use in fractional horse power a.c. motors" (1971). Masters Theses. 5466.
https://scholarsmine.mst.edu/masters_theses/5466