November 13-14, 1984 (St. Louis, Missouri)
Presented by: Department of Civil Engineering University of Missouri - Rolla
George Winter Memorial Conference
Sponsored by: American Iron and Steel Institute Metal Building Manufacturers Association Steel Deck Institute University of Missouri - Rolla Engineering Continuing Education
In Cooperation with: ASCE Committee on Cold-Formed Steel Members Canadian Sheet Steel Building Institute, Canada Rack Manufacturer's Institute Structural Stability Research Council Task Group on Thin-Walled Metal Construction University of Strathclyde, Scotland e
Edited by: Wei-Wen Yu and Joseph H. Senne
Conference Directors: Wei-Wen Yu, Professor of Civil Engineering, University of Missouri - Rolla; Chairman, Structural Stability Research Council Task Group on Thin-Walled Metal Construction Joseph H. Senne, Chairman and Professor of Civil Engineering, University of Missouri-Rolla
Planning Committee: D.S. Ellifritt - University of Florida; Representative of ASCE Committee on Cold-Formed Members S.J. Errera - Bethlehem Steel Corporation; Representative of the AISI Construction Department R.B. Healger - Nicholas J. Bouras, Inc.; Representative of SDI A.L. Johnson - AISI; Adviser D.L. Johnson - Butler Manufacturing Company; Adviser H. Klein - Unarco Industries, Inc.; Representative of the RMI K.H. Klippstein - University of Pittsburgh; Advisor T. Pekoz - Cornell University; Advisor D. Perry - Representative of Metal Building Manufacturers Association J. Rhodes - Representative of the University of Strathclyde, Scotland W.L. Ries - UMR; Representative of the UMR Engineering Continuing Education P.A. Seaburg - Armco Inc.; Representative of the ASCE Committee on Metals J.H. Senne - UMR; Representative of the UMR Department of Civil Engineering D.L. Tarlton - Representative of CSSBI, Canada D.S. Wolford - Private Consultant; Adviser W.W. Yu - UMR; Representative of the SSRC Task Group on Thin-Walled Metal Construction
Browse the contents of (1984) - 7th International Specialty Conference on Cold-Formed Steel Structures:
- Session 01: Flexural Members
- Session 02: Buckling and Strength of Plates
- Session 03: Compression Members
- Session 04: Frames
- Session 05: Diaphragm-Braced Structural Members
- Session 06: Composite Design
- Session 07: Rack Structures
- Session 08: Steel Buildings
- Session 09: Connections
- Session 10: Design Method Developments
- Session 11: Special Design
- Session 12: Engineering Education and Construction Practice