Additional Conference Information

Presented by:
Department of Civil, Architectural & Environmental Engineering
Wei-Wen Yu Center for Cold-Formed Steel Structures
Missouri University of Science and Technology

Sponsored by:
American Iron and Steel Institute
Cold-Formed Steel Engineers Institute of the Steel Framing Alliance
Metal Building Manufacturers Association
Rack Manufacturers Institute
Steel Deck Institute
Steel Stud Manufacturers Association
Missouri University of Science and Technology

In Cooperation with:
ASCE Committee on Cold-Formed Members
Canadian Sheet Steel Building Institute, Canada
SSRC Task Group on Thin-Walled Metal Construction
Centre for Advanced Structural Engineering of the University of Sydney, Australia

Edited by: Roger A. LaBoube and Wei-Wen Yu

Conference Directors:
Robert A. LaBoube, Director
Wei-Wen Yu, Founding Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures
Missouri University of Science and Technology

Planning Committee:
D. Allen - Representative of SSMA
R. L. Brockenbrough - R.L. Brockenbrough & Associates, Inc.
H. H. Chen - Representative of the AISI
J. Crews - Unarco Material Handling Inc.; Representative of RMI
W. S. Easterling - Virginia Tech
S. R. Fox - Representative of CSSBI, Canada
G. J. Hancock - Representative of the University of Sydney, Australia
R. B. Haws - NUCONSTEEL
D. L. Johnson - Consultant
W. E. Kile - Structuneering Inc.; Representative of ASCE
R. A. LaBoube - Missouri S&T; Conference Director
J. W. Larson - Representative of AISI
J. A. Mattingly - Consultant
T. B. Peköz - Cornell University
B. W. Schafer - Johns Hopkins University; Representative of SSRC Task Group on Thin-Walled Metal Construction
W. E. Schultz - Nucor Research and Development
P. A. Seaburg - Editor, Journal of Architectural Engineering
W. L. Shoemaker - Representative of MBMA
T. Sputo - Representative of SDI
W. W. Yu - Missouri S&T; Conference Co-Director; Representative of the Wei-Wen Yu Center for Cold-Formed Steel Structures